diff --git a/plat/hisilicon/hikey/hikey_pm.c b/plat/hisilicon/hikey/hikey_pm.c
new file mode 100644
index 0000000..9b4ef5b
--- /dev/null
+++ b/plat/hisilicon/hikey/hikey_pm.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <cci.h>
+#include <debug.h>
+#include <gicv2.h>
+#include <hi6220.h>
+#include <hisi_ipc.h>
+#include <hisi_pwrc.h>
+#include <hisi_sram_map.h>
+#include <mmio.h>
+#include <psci.h>
+
+#include "hikey_def.h"
+
+#define HIKEY_CLUSTER_STATE_ON		0
+#define HIKEY_CLUSTER_STATE_OFF		1
+
+static uintptr_t hikey_sec_entrypoint;
+/* There're two clusters in HiKey. */
+static int hikey_cluster_state[] = {HIKEY_CLUSTER_STATE_OFF,
+				    HIKEY_CLUSTER_STATE_OFF};
+
+/*******************************************************************************
+ * Handler called when a power domain is about to be turned on. The
+ * level and mpidr determine the affinity instance.
+ ******************************************************************************/
+static int hikey_pwr_domain_on(u_register_t mpidr)
+{
+	int cpu, cluster;
+	int curr_cluster;
+
+	cluster = MPIDR_AFFLVL1_VAL(mpidr);
+	cpu = MPIDR_AFFLVL0_VAL(mpidr);
+	curr_cluster = MPIDR_AFFLVL1_VAL(read_mpidr());
+	if (cluster != curr_cluster)
+		hisi_ipc_cluster_on(cpu, cluster);
+
+	hisi_pwrc_set_core_bx_addr(cpu, cluster, hikey_sec_entrypoint);
+	hisi_ipc_cpu_on(cpu, cluster);
+	return 0;
+}
+
+static void hikey_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	unsigned long mpidr;
+	int cpu, cluster;
+
+	mpidr = read_mpidr();
+	cluster = MPIDR_AFFLVL1_VAL(mpidr);
+	cpu = MPIDR_AFFLVL0_VAL(mpidr);
+	if (hikey_cluster_state[cluster] == HIKEY_CLUSTER_STATE_OFF) {
+		/*
+		 * Enable CCI coherency for this cluster.
+		 * No need for locks as no other cpu is active at the moment.
+		 */
+		cci_enable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(mpidr));
+		hikey_cluster_state[cluster] = HIKEY_CLUSTER_STATE_ON;
+	}
+
+	/* Zero the jump address in the mailbox for this cpu */
+	hisi_pwrc_set_core_bx_addr(cpu, cluster, 0);
+
+	/* Program the GIC per-cpu distributor or re-distributor interface */
+	gicv2_pcpu_distif_init();
+	/* Enable the GIC cpu interface */
+	gicv2_cpuif_enable();
+}
+
+/*******************************************************************************
+ * Handler called when a power domain is about to be turned off. The
+ * target_state encodes the power state that each level should transition to.
+ ******************************************************************************/
+void hikey_pwr_domain_off(const psci_power_state_t *target_state)
+{
+	unsigned long mpidr;
+	int cpu, cluster;
+
+	gicv2_cpuif_disable();
+
+	mpidr = read_mpidr();
+	cluster = MPIDR_AFFLVL1_VAL(mpidr);
+	cpu = MPIDR_AFFLVL0_VAL(mpidr);
+	if (target_state->pwr_domain_state[MPIDR_AFFLVL1] ==
+	    PLAT_MAX_OFF_STATE) {
+		hisi_ipc_spin_lock(HISI_IPC_SEM_CPUIDLE);
+		cci_disable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(mpidr));
+		hisi_ipc_spin_unlock(HISI_IPC_SEM_CPUIDLE);
+
+		hisi_ipc_cluster_off(cpu, cluster);
+		hikey_cluster_state[cluster] = HIKEY_CLUSTER_STATE_OFF;
+	}
+	hisi_ipc_cpu_off(cpu, cluster);
+}
+
+/*******************************************************************************
+ * Handler to reboot the system.
+ ******************************************************************************/
+static void __dead2 hikey_system_reset(void)
+{
+	/* Send the system reset request */
+	mmio_write_32(AO_SC_SYS_STAT0, 0x48698284);
+	isb();
+	dsb();
+
+	wfi();
+	panic();
+}
+
+/*******************************************************************************
+ * Handler called to check the validity of the power state parameter.
+ ******************************************************************************/
+int hikey_validate_power_state(unsigned int power_state,
+			       psci_power_state_t *req_state)
+{
+	int pstate = psci_get_pstate_type(power_state);
+	int pwr_lvl = psci_get_pstate_pwrlvl(power_state);
+	int i;
+
+	assert(req_state);
+
+	if (pwr_lvl > PLAT_MAX_PWR_LVL)
+		return PSCI_E_INVALID_PARAMS;
+
+	/* Sanity check the requested state */
+	if (pstate == PSTATE_TYPE_STANDBY) {
+		/*
+		 * It's possible to enter standby only on power level 0
+		 * Ignore any other power level.
+		 */
+		if (pwr_lvl != MPIDR_AFFLVL0)
+			return PSCI_E_INVALID_PARAMS;
+
+		req_state->pwr_domain_state[MPIDR_AFFLVL0] =
+					PLAT_MAX_RET_STATE;
+	} else {
+		for (i = MPIDR_AFFLVL0; i <= pwr_lvl; i++)
+			req_state->pwr_domain_state[i] =
+					PLAT_MAX_OFF_STATE;
+	}
+
+	/*
+	 * We expect the 'state id' to be zero.
+	 */
+	if (psci_get_pstate_id(power_state))
+		return PSCI_E_INVALID_PARAMS;
+
+	return PSCI_E_SUCCESS;
+}
+
+/*******************************************************************************
+ * Handler called to check the validity of the non secure entrypoint.
+ ******************************************************************************/
+static int hikey_validate_ns_entrypoint(uintptr_t entrypoint)
+{
+	/*
+	 * Check if the non secure entrypoint lies within the non
+	 * secure DRAM.
+	 */
+	if ((entrypoint > DDR_BASE) && (entrypoint < (DDR_BASE + DDR_SIZE)))
+		return PSCI_E_SUCCESS;
+
+	return PSCI_E_INVALID_ADDRESS;
+}
+
+/*******************************************************************************
+ * Export the platform handlers to enable psci to invoke them
+ ******************************************************************************/
+static const plat_psci_ops_t hikey_psci_ops = {
+	.cpu_standby			= NULL,
+	.pwr_domain_on			= hikey_pwr_domain_on,
+	.pwr_domain_on_finish		= hikey_pwr_domain_on_finish,
+	.pwr_domain_off			= hikey_pwr_domain_off,
+	.pwr_domain_suspend		= NULL,
+	.pwr_domain_suspend_finish	= NULL,
+	.system_off			= NULL,
+	.system_reset			= hikey_system_reset,
+	.validate_power_state		= hikey_validate_power_state,
+	.validate_ns_entrypoint		= hikey_validate_ns_entrypoint,
+	.get_sys_suspend_power_state	= NULL,
+};
+
+/*******************************************************************************
+ * Export the platform specific power ops and initialize Power Controller
+ ******************************************************************************/
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+			const plat_psci_ops_t **psci_ops)
+{
+	hikey_sec_entrypoint = sec_entrypoint;
+
+	/*
+	 * Initialize PSCI ops struct
+	 */
+	*psci_ops = &hikey_psci_ops;
+
+	return 0;
+}