Tegra: memctrl: clean MC INT status before exit to bootloader
This patch cleans the Memory controller's interrupt status
register, before exiting to the non-secure world during
cold boot. This is required as we observed that the MC's
arbitration bit is set before exiting the secure world.
Change-Id: Iacd01994d03b3b9cbd7b8a57fe7ab5b04e607a9f
Signed-off-by: Harvey Hsieh <hhsieh@nvidia.com>
diff --git a/plat/nvidia/tegra/common/tegra_bl31_setup.c b/plat/nvidia/tegra/common/tegra_bl31_setup.c
index 30ff0a3..afb10fe 100644
--- a/plat/nvidia/tegra/common/tegra_bl31_setup.c
+++ b/plat/nvidia/tegra/common/tegra_bl31_setup.c
@@ -342,6 +342,15 @@
void bl31_plat_runtime_setup(void)
{
/*
+ * During cold boot, it is observed that the arbitration
+ * bit is set in the Memory controller leading to false
+ * error interrupts in the non-secure world. To avoid
+ * this, clean the interrupt status register before
+ * booting into the non-secure world
+ */
+ tegra_memctrl_clear_pending_interrupts();
+
+ /*
* During boot, USB3 and flash media (SDMMC/SATA) devices need
* access to IRAM. Because these clients connect to the MC and
* do not have a direct path to the IRAM, the MC implements AHB