plat/arm: scp: Move to drivers/ folder
Change-Id: Ida5dae39478654405d0ee31a6cbddb4579e76a7f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
diff --git a/drivers/arm/css/scp/css_pm_scpi.c b/drivers/arm/css/scp/css_pm_scpi.c
new file mode 100644
index 0000000..b4019ce
--- /dev/null
+++ b/drivers/arm/css/scp/css_pm_scpi.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/arm/css/css_scp.h>
+#include <drivers/arm/css/css_scpi.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/arm/css/common/css_pm.h>
+
+/*
+ * This file implements the SCP power management functions using SCPI protocol.
+ */
+
+/*
+ * Helper function to inform power down state to SCP.
+ */
+void css_scp_suspend(const struct psci_power_state *target_state)
+{
+ uint32_t cluster_state = scpi_power_on;
+ uint32_t system_state = scpi_power_on;
+
+ /* Check if power down at system power domain level is requested */
+ if (css_system_pwr_state(target_state) == ARM_LOCAL_STATE_OFF)
+ system_state = scpi_power_retention;
+
+ /* Cluster is to be turned off, so disable coherency */
+ if (CSS_CLUSTER_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF)
+ cluster_state = scpi_power_off;
+
+ /*
+ * Ask the SCP to power down the appropriate components depending upon
+ * their state.
+ */
+ scpi_set_css_power_state(read_mpidr_el1(),
+ scpi_power_off,
+ cluster_state,
+ system_state);
+}
+
+/*
+ * Helper function to turn off a CPU power domain and its parent power domains
+ * if applicable. Since SCPI doesn't differentiate between OFF and suspend, we
+ * call the suspend helper here.
+ */
+void css_scp_off(const struct psci_power_state *target_state)
+{
+ css_scp_suspend(target_state);
+}
+
+/*
+ * Helper function to turn ON a CPU power domain and its parent power domains
+ * if applicable.
+ */
+void css_scp_on(u_register_t mpidr)
+{
+ /*
+ * SCP takes care of powering up parent power domains so we
+ * only need to care about level 0
+ */
+ scpi_set_css_power_state(mpidr, scpi_power_on, scpi_power_on,
+ scpi_power_on);
+}
+
+/*
+ * Helper function to get the power state of a power domain node as reported
+ * by the SCP.
+ */
+int css_scp_get_power_state(u_register_t mpidr, unsigned int power_level)
+{
+ int rc, element;
+ unsigned int cpu_state, cluster_state;
+
+ /*
+ * The format of 'power_level' is implementation-defined, but 0 must
+ * mean a CPU. We also allow 1 to denote the cluster
+ */
+ if (power_level != ARM_PWR_LVL0 && power_level != ARM_PWR_LVL1)
+ return PSCI_E_INVALID_PARAMS;
+
+ /* Query SCP */
+ rc = scpi_get_css_power_state(mpidr, &cpu_state, &cluster_state);
+ if (rc != 0)
+ return PSCI_E_INVALID_PARAMS;
+
+ /* Map power states of CPU and cluster to expected PSCI return codes */
+ if (power_level == ARM_PWR_LVL0) {
+ /*
+ * The CPU state returned by SCP is an 8-bit bit mask
+ * corresponding to each CPU in the cluster
+ */
+#if ARM_PLAT_MT
+ /*
+ * The current SCPI driver only caters for single-threaded
+ * platforms. Hence we ignore the thread ID (which is always 0)
+ * for such platforms.
+ */
+ element = (mpidr >> MPIDR_AFF1_SHIFT) & MPIDR_AFFLVL_MASK;
+#else
+ element = mpidr & MPIDR_AFFLVL_MASK;
+#endif /* ARM_PLAT_MT */
+ return CSS_CPU_PWR_STATE(cpu_state, element) ==
+ CSS_CPU_PWR_STATE_ON ? HW_ON : HW_OFF;
+ } else {
+ assert(cluster_state == CSS_CLUSTER_PWR_STATE_ON ||
+ cluster_state == CSS_CLUSTER_PWR_STATE_OFF);
+ return cluster_state == CSS_CLUSTER_PWR_STATE_ON ? HW_ON :
+ HW_OFF;
+ }
+}
+
+/*
+ * Helper function to shutdown the system via SCPI.
+ */
+void __dead2 css_scp_sys_shutdown(void)
+{
+ uint32_t response;
+
+ /*
+ * Disable GIC CPU interface to prevent pending interrupt
+ * from waking up the AP from WFI.
+ */
+ plat_arm_gic_cpuif_disable();
+
+ /* Send the power down request to the SCP */
+ response = scpi_sys_power_state(scpi_system_shutdown);
+
+ if (response != SCP_OK) {
+ ERROR("CSS System Off: SCP error %u.\n", response);
+ panic();
+ }
+ wfi();
+ ERROR("CSS System Off: operation not handled.\n");
+ panic();
+}
+
+/*
+ * Helper function to reset the system via SCPI.
+ */
+void __dead2 css_scp_sys_reboot(void)
+{
+ uint32_t response;
+
+ /*
+ * Disable GIC CPU interface to prevent pending interrupt
+ * from waking up the AP from WFI.
+ */
+ plat_arm_gic_cpuif_disable();
+
+ /* Send the system reset request to the SCP */
+ response = scpi_sys_power_state(scpi_system_reboot);
+
+ if (response != SCP_OK) {
+ ERROR("CSS System Reset: SCP error %u.\n", response);
+ panic();
+ }
+ wfi();
+ ERROR("CSS System Reset: operation not handled.\n");
+ panic();
+}