refactor(plat/nxp/common): moved plat make-variables to new plat_common_def.mk
Move some common make variables to new plat_common_def.mk,
then it can be reused by other platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I37bd65b0f8124f63074fa03339f886c2cdb30bd3
diff --git a/plat/nxp/common/plat_make_helper/plat_common_def.mk b/plat/nxp/common/plat_make_helper/plat_common_def.mk
new file mode 100644
index 0000000..79f94bd
--- /dev/null
+++ b/plat/nxp/common/plat_make_helper/plat_common_def.mk
@@ -0,0 +1,72 @@
+# Copyright 2020-2021 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Include build macros, for example: SET_NXP_MAKE_FLAG
+include plat/nxp/common/plat_make_helper/plat_build_macros.mk
+
+# Adding platform specific defines
+
+$(eval $(call add_define_val,BOARD,'"${BOARD}"'))
+
+ifeq (${POVDD_ENABLE},yes)
+$(eval $(call add_define,CONFIG_POVDD_ENABLE))
+endif
+
+ifneq (${FLASH_TYPE},)
+$(eval $(call add_define,CONFIG_${FLASH_TYPE}))
+endif
+
+ifneq (${XSPI_FLASH_SZ},)
+$(eval $(call add_define_val,NXP_FLEXSPI_FLASH_SIZE,${XSPI_FLASH_SZ}))
+endif
+
+ifneq (${QSPI_FLASH_SZ},)
+$(eval $(call add_define_val,NXP_QSPI_FLASH_SIZE,${QSPI_FLASH_SZ}))
+endif
+
+ifneq (${NOR_FLASH_SZ},)
+$(eval $(call add_define_val,NXP_NOR_FLASH_SIZE,${NOR_FLASH_SZ}))
+endif
+
+
+ifneq (${FSPI_ERASE_4K},)
+$(eval $(call add_define_val,CONFIG_FSPI_ERASE_4K,${FSPI_ERASE_4K}))
+endif
+
+ifneq (${NUM_OF_DDRC},)
+$(eval $(call add_define_val,NUM_OF_DDRC,${NUM_OF_DDRC}))
+endif
+
+ifeq (${CONFIG_DDR_NODIMM},1)
+$(eval $(call add_define,CONFIG_DDR_NODIMM))
+DDRC_NUM_DIMM := 1
+endif
+
+ifneq (${DDRC_NUM_DIMM},)
+$(eval $(call add_define_val,DDRC_NUM_DIMM,${DDRC_NUM_DIMM}))
+endif
+
+ifneq (${DDRC_NUM_CS},)
+$(eval $(call add_define_val,DDRC_NUM_CS,${DDRC_NUM_CS}))
+endif
+
+ifeq (${DDR_ADDR_DEC},yes)
+$(eval $(call add_define,CONFIG_DDR_ADDR_DEC))
+endif
+
+ifeq (${DDR_ECC_EN},yes)
+$(eval $(call add_define,CONFIG_DDR_ECC_EN))
+endif
+
+ifeq (${CONFIG_STATIC_DDR},1)
+$(eval $(call add_define,CONFIG_STATIC_DDR))
+endif
+
+# Platform can control the base address for non-volatile storage.
+#$(eval $(call add_define_val,NV_STORAGE_BASE_ADDR,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - 2 * ${NXP_XSPI_NOR_UNIT_SIZE}'))
+
+ifeq (${WARM_BOOT},yes)
+$(eval $(call add_define_val,PHY_TRAINING_REGS_ON_FLASH,'${BL2_BIN_XSPI_NOR_END_ADDRESS} - ${NXP_XSPI_NOR_UNIT_SIZE}'))
+endif