diff --git a/plat/nxp/soc-ls1028a/aarch64/ls1028a.S b/plat/nxp/soc-ls1028a/aarch64/ls1028a.S
new file mode 100644
index 0000000..404c39e
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/aarch64/ls1028a.S
@@ -0,0 +1,1387 @@
+/*
+ * Copyright 2018-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+	.section .text, "ax"
+
+#include <asm_macros.S>
+
+#include <lib/psci/psci.h>
+#include <nxp_timer.h>
+#include <plat_gic.h>
+#include <pmu.h>
+
+#include <bl31_data.h>
+#include <plat_psci.h>
+#include <platform_def.h>
+
+	.global soc_init_lowlevel
+	.global soc_init_percpu
+	.global _set_platform_security
+	.global _soc_set_start_addr
+
+	.global _soc_core_release
+	.global _soc_ck_disabled
+	.global _soc_core_restart
+	.global _soc_core_prep_off
+	.global _soc_core_entr_off
+	.global _soc_core_exit_off
+	.global _soc_sys_reset
+	.global _soc_sys_off
+	.global _soc_core_prep_stdby
+	.global _soc_core_entr_stdby
+	.global _soc_core_exit_stdby
+	.global _soc_core_prep_pwrdn
+	.global _soc_core_entr_pwrdn
+	.global _soc_core_exit_pwrdn
+	.global _soc_clstr_prep_stdby
+	.global _soc_clstr_exit_stdby
+	.global _soc_clstr_prep_pwrdn
+	.global _soc_clstr_exit_pwrdn
+	.global _soc_sys_prep_stdby
+	.global _soc_sys_exit_stdby
+	.global _soc_sys_prep_pwrdn
+	.global _soc_sys_pwrdn_wfi
+	.global _soc_sys_exit_pwrdn
+
+	.equ TZPCDECPROT_0_SET_BASE, 0x02200804
+	.equ TZPCDECPROT_1_SET_BASE, 0x02200810
+	.equ TZPCDECPROT_2_SET_BASE, 0x0220081C
+
+	.equ TZASC_REGION_ATTRIBUTES_0_0, 0x01100110
+
+/*
+ * This function initialize the soc.
+ * in: void
+ * out: void
+ * uses x0 - x11
+ */
+func soc_init_lowlevel
+	/*
+	 * Called from C, so save the non-volatile regs
+	 * save these as pairs of registers to maintain the
+	 * required 16-byte alignment on the stack
+	 */
+	stp	x4,  x5,  [sp, #-16]!
+	stp	x6,  x7,  [sp, #-16]!
+	stp	x8,  x9,  [sp, #-16]!
+	stp	x10, x11, [sp, #-16]!
+	stp	x12, x13, [sp, #-16]!
+	stp	x18, x30, [sp, #-16]!
+
+	/*
+	 * Make sure the personality has been established by releasing cores
+	 * that are marked "to-be-disabled" from reset
+	 */
+	bl	release_disabled  /* 0-8 */
+
+	/* Set SCRATCHRW7 to 0x0 */
+	ldr	x0, =DCFG_SCRATCHRW7_OFFSET
+	mov	x1, xzr
+	bl	_write_reg_dcfg
+
+	/* Restore the aarch32/64 non-volatile registers */
+	ldp	x18, x30, [sp], #16
+	ldp	x12, x13, [sp], #16
+	ldp	x10, x11, [sp], #16
+	ldp	x8,  x9,  [sp], #16
+	ldp	x6,  x7,  [sp], #16
+	ldp	x4,  x5,  [sp], #16
+	ret
+endfunc soc_init_lowlevel
+
+/*
+ * void soc_init_percpu(void)
+ *
+ * This function performs any soc-specific initialization that is needed on
+ * a per-core basis
+ * in:  none
+ * out: none
+ * uses x0 - x3
+ */
+func soc_init_percpu
+	stp	x4,  x30,  [sp, #-16]!
+
+	bl	plat_my_core_mask
+	mov	x2, x0
+
+	/* x2 = core mask */
+
+	/* see if this core is marked for prefetch disable */
+	mov	x0, #PREFETCH_DIS_OFFSET
+	bl	_get_global_data  /* 0-1 */
+	tst	x0, x2
+	b.eq	1f
+	bl	_disable_ldstr_pfetch_A72  /* 0 */
+1:
+	mov	x0, #NXP_PMU_ADDR
+	bl	enable_timer_base_to_cluster
+
+	ldp	x4,  x30,  [sp], #16
+	ret
+endfunc soc_init_percpu
+
+/*
+ * This function determines if a core is disabled via COREDISABLEDSR
+ * in:  w0  = core_mask_lsb
+ * out: w0  = 0, core not disabled
+ *      w0 != 0, core disabled
+ * uses x0, x1
+ */
+func _soc_ck_disabled
+	/* get base addr of dcfg block */
+	ldr	x1, =NXP_DCFG_ADDR
+
+	/* read COREDISABLEDSR */
+	ldr	w1, [x1, #DCFG_COREDISABLEDSR_OFFSET]
+
+	/* test core bit */
+	and	w0, w1, w0
+
+	ret
+endfunc _soc_ck_disabled
+
+/*
+ * This function sets the security mechanisms in the SoC to implement the
+ * Platform Security Policy
+ */
+func _set_platform_security
+	mov	x3, x30
+
+#if (!SUPPRESS_TZC)
+	/* initialize the tzpc */
+	bl	init_tzpc
+#endif
+
+#if (!SUPPRESS_SEC)
+	/* initialize secmon */
+	bl	initSecMon
+#endif
+
+	mov	x30, x3
+	ret
+endfunc _set_platform_security
+
+/*
+ * Part of CPU_ON
+ *
+ * This function releases a secondary core from reset
+ * in:   x0 = core_mask_lsb
+ * out:  none
+ * uses: x0 - x3
+ */
+_soc_core_release:
+	mov	x3, x30
+
+	/*
+	 * Write to CORE_HOLD to tell the bootrom that we want this core
+	 * to run
+	 */
+	ldr	x1, =NXP_SEC_REGFILE_ADDR
+	str	w0, [x1, #CORE_HOLD_OFFSET]
+
+	/* Read-modify-write BRRL to release core */
+	mov	x1, #NXP_RESET_ADDR
+	ldr	w2, [x1, #BRR_OFFSET]
+	orr	w2, w2, w0
+	str	w2, [x1, #BRR_OFFSET]
+	dsb	sy
+	isb
+
+	/* Send event */
+	sev
+	isb
+
+	mov	x30, x3
+	ret
+
+/*
+ * This function writes a 64-bit address to bootlocptrh/l
+ * in:  x0, 64-bit address to write to BOOTLOCPTRL/H
+ * uses x0, x1, x2
+ */
+func _soc_set_start_addr
+	/* Get the 64-bit base address of the dcfg block */
+	ldr	x2, =NXP_DCFG_ADDR
+
+	/* Write the 32-bit BOOTLOCPTRL register */
+	mov	x1, x0
+	str	w1, [x2, #DCFG_BOOTLOCPTRL_OFFSET]
+
+	/* Write the 32-bit BOOTLOCPTRH register */
+	lsr	x1, x0, #32
+	str	w1, [x2, #DCFG_BOOTLOCPTRH_OFFSET]
+	ret
+endfunc _soc_set_start_addr
+
+/*
+ * Part of CPU_ON
+ *
+ * This function restarts a core shutdown via _soc_core_entr_off
+ * in:  x0 = core mask lsb (of the target cpu)
+ * out: x0 == 0, on success
+ *      x0 != 0, on failure
+ * uses x0 - x6
+ */
+_soc_core_restart:
+	mov	x6, x30
+	mov	x4, x0
+
+	/* pgm GICD_CTLR - enable secure grp0  */
+	mov	x5, #NXP_GICD_ADDR
+	ldr	w2, [x5, #GICD_CTLR_OFFSET]
+	orr	w2, w2, #GICD_CTLR_EN_GRP_0
+	str	w2, [x5, #GICD_CTLR_OFFSET]
+	dsb	sy
+	isb
+
+	/* Poll on RWP til write completes */
+4:
+	ldr	w2, [x5, #GICD_CTLR_OFFSET]
+	tst	w2, #GICD_CTLR_RWP
+	b.ne	4b
+
+	/*
+	 * x4 = core mask lsb
+	 * x5 = gicd base addr
+	 */
+
+	mov	x0, x4
+	bl	get_mpidr_value
+
+	/* Generate target list bit */
+	and	x1, x0, #MPIDR_AFFINITY0_MASK
+	mov	x2, #1
+	lsl	x2, x2, x1
+
+	/* Get the affinity1 field */
+	and	x1, x0, #MPIDR_AFFINITY1_MASK
+	lsl	x1, x1, #8
+	orr	x2, x2, x1
+
+	/* Insert the INTID for SGI15 */
+	orr	x2, x2, #ICC_SGI0R_EL1_INTID
+
+	/* Fire the SGI */
+	msr	ICC_SGI0R_EL1, x2
+	dsb	sy
+	isb
+
+	/* Load '0' on success */
+	mov	x0, xzr
+
+	mov	x30, x6
+	ret
+
+/*
+ * Part of CPU_OFF
+ *
+ * This function programs SoC & GIC registers in preparation for shutting down
+ * the core
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0 - x7
+ */
+_soc_core_prep_off:
+	mov	x8, x30
+	mov	x7, x0
+
+	/* x7 = core mask lsb */
+
+	mrs	x1, CPUECTLR_EL1
+
+	/* Set smp and disable L2 snoops in cpuectlr */
+	orr	x1, x1, #CPUECTLR_SMPEN_EN
+	orr	x1, x1, #CPUECTLR_DISABLE_TWALK_PREFETCH
+	bic	x1, x1, #CPUECTLR_INS_PREFETCH_MASK
+	bic	x1, x1, #CPUECTLR_DAT_PREFETCH_MASK
+
+	/* Set retention control in cpuectlr */
+	bic	x1, x1, #CPUECTLR_TIMER_MASK
+	orr	x1, x1, #CPUECTLR_TIMER_2TICKS
+	msr	CPUECTLR_EL1, x1
+
+	/* Get redistributor rd base addr for this core */
+	mov	x0, x7
+	bl	get_gic_rd_base
+	mov	x6, x0
+
+	/* Get redistributor sgi base addr for this core */
+	mov	x0, x7
+	bl	get_gic_sgi_base
+	mov	x5, x0
+
+	/*
+	 * x5 = gicr sgi base addr
+	 * x6 = gicr rd  base addr
+	 * x7 = core mask lsb
+	 */
+
+	/* Disable SGI 15 at redistributor - GICR_ICENABLER0 */
+	mov	w3, #GICR_ICENABLER0_SGI15
+	str	w3, [x5, #GICR_ICENABLER0_OFFSET]
+2:
+	/* Poll on rwp bit in GICR_CTLR */
+	ldr	w4, [x6, #GICR_CTLR_OFFSET]
+	tst	w4, #GICR_CTLR_RWP
+	b.ne	2b
+
+	/* Disable GRP1 interrupts at cpu interface */
+	msr	ICC_IGRPEN1_EL3, xzr
+
+	/* Disable GRP0 ints at cpu interface */
+	msr	ICC_IGRPEN0_EL1, xzr
+
+	/* Program the redistributor - poll on GICR_CTLR.RWP as needed */
+
+	/* Define SGI 15 as Grp0 - GICR_IGROUPR0 */
+	ldr	w4, [x5, #GICR_IGROUPR0_OFFSET]
+	bic	w4, w4, #GICR_IGROUPR0_SGI15
+	str	w4, [x5, #GICR_IGROUPR0_OFFSET]
+
+	/* Define SGI 15 as Grp0 - GICR_IGRPMODR0 */
+	ldr	w3, [x5, #GICR_IGRPMODR0_OFFSET]
+	bic	w3, w3, #GICR_IGRPMODR0_SGI15
+	str	w3, [x5, #GICR_IGRPMODR0_OFFSET]
+
+	/* Set priority of SGI 15 to highest (0x0) - GICR_IPRIORITYR3 */
+	ldr	w4, [x5, #GICR_IPRIORITYR3_OFFSET]
+	bic	w4, w4, #GICR_IPRIORITYR3_SGI15_MASK
+	str	w4, [x5, #GICR_IPRIORITYR3_OFFSET]
+
+	/* Enable SGI 15 at redistributor - GICR_ISENABLER0 */
+	mov	w3, #GICR_ISENABLER0_SGI15
+	str	w3, [x5, #GICR_ISENABLER0_OFFSET]
+	dsb	sy
+	isb
+3:
+	/* Poll on rwp bit in GICR_CTLR */
+	ldr	w4, [x6, #GICR_CTLR_OFFSET]
+	tst	w4, #GICR_CTLR_RWP
+	b.ne	3b
+
+	/* Quiesce the debug interfaces */
+	mrs	x3, osdlr_el1
+	orr	x3, x3, #OSDLR_EL1_DLK_LOCK
+	msr	osdlr_el1, x3
+	isb
+
+	/* Enable grp0 ints */
+	mov	x3, #ICC_IGRPEN0_EL1_EN
+	msr	ICC_IGRPEN0_EL1, x3
+
+	/*
+	 * x5 = gicr sgi base addr
+	 * x6 = gicr rd  base addr
+	 * x7 = core mask lsb
+	 */
+
+	/* Clear any pending interrupts */
+	mvn	w1, wzr
+	str	w1, [x5, #GICR_ICPENDR0_OFFSET]
+
+	/* Make sure system counter is enabled */
+	ldr	x3, =NXP_TIMER_ADDR
+	ldr	w0, [x3, #SYS_COUNTER_CNTCR_OFFSET]
+	tst	w0, #SYS_COUNTER_CNTCR_EN
+	b.ne	4f
+	orr	w0, w0, #SYS_COUNTER_CNTCR_EN
+	str	w0, [x3, #SYS_COUNTER_CNTCR_OFFSET]
+4:
+	/* Enable the core timer and mask timer interrupt */
+	mov	x1, #CNTP_CTL_EL0_EN
+	orr	x1, x1, #CNTP_CTL_EL0_IMASK
+	msr	cntp_ctl_el0, x1
+
+	isb
+	mov	x30, x8
+	ret
+
+/*
+ * Part of CPU_OFF
+ *
+ * This function performs the final steps to shutdown the core
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0 - x5
+ */
+_soc_core_entr_off:
+	mov	x5, x30
+	mov	x4, x0
+
+	/* x4 = core mask */
+1:
+	/* Enter low-power state by executing wfi */
+	wfi
+
+	/* See if SGI15 woke us up */
+	mrs	x2, ICC_IAR0_EL1
+	mov	x3, #ICC_IAR0_EL1_SGI15
+	cmp	x2, x3
+	b.ne	1b
+
+	/* Deactivate the int */
+	msr	ICC_EOIR0_EL1, x2
+
+	/* x4 = core mask */
+2:
+	/* Check if core has been turned on */
+	mov	x0, x4
+	bl	_getCoreState
+
+	/* x0 = core state */
+
+	cmp	x0, #CORE_WAKEUP
+	b.ne	1b
+
+	/* If we get here, then we have exited the wfi */
+	mov	x30, x5
+	ret
+
+/*
+ * Part of CPU_OFF
+ *
+ * This function starts the process of starting a core back up
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1, x2, x3, x4, x5, x6
+ */
+_soc_core_exit_off:
+	mov	x6, x30
+	mov	x5, x0
+
+	/* Disable forwarding of GRP0 ints at cpu interface */
+	msr	ICC_IGRPEN0_EL1, xzr
+
+	/* Get redistributor sgi base addr for this core */
+	mov	x0, x5
+	bl	get_gic_sgi_base
+	mov	x4, x0
+
+	/* x4 = gicr sgi base addr */
+	/* x5 = core mask */
+
+	/* Disable SGI 15 at redistributor - GICR_ICENABLER0 */
+	mov	w1, #GICR_ICENABLER0_SGI15
+	str	w1, [x4, #GICR_ICENABLER0_OFFSET]
+
+	/* Get redistributor rd base addr for this core */
+	mov	x0, x5
+	bl	get_gic_rd_base
+	mov	x4, x0
+
+	/* x4 = gicr rd  base addr */
+2:
+	/* Poll on rwp bit in GICR_CTLR */
+	ldr	w2, [x4, #GICR_CTLR_OFFSET]
+	tst	w2, #GICR_CTLR_RWP
+	b.ne	2b
+
+	/* x4 = gicr rd  base addr */
+
+	/* Unlock the debug interfaces */
+	mrs	x3, osdlr_el1
+	bic	x3, x3, #OSDLR_EL1_DLK_LOCK
+	msr	osdlr_el1, x3
+	isb
+
+	dsb	sy
+	isb
+	mov	x30, x6
+	ret
+
+/*
+ * This function requests a reset of the entire SOC
+ * in:  none
+ * out: none
+ * uses: x0, x1, x2, x3, x4, x5, x6
+ */
+_soc_sys_reset:
+	mov	x3, x30
+
+	/* Make sure the mask is cleared in the reset request mask register */
+	mov	x0, #RST_RSTRQMR1_OFFSET
+	mov	w1, wzr
+	bl	_write_reg_reset
+
+	/* Set the reset request */
+	mov	x4, #RST_RSTCR_OFFSET
+	mov	x0, x4
+	mov	w1, #RSTCR_RESET_REQ
+	bl	_write_reg_reset
+
+	/* x4 = RST_RSTCR_OFFSET */
+
+	/*
+	 * Just in case this address range is mapped as cacheable,
+	 * flush the write out of the dcaches
+	 */
+	mov	x2, #NXP_RESET_ADDR
+	add	x2, x2, x4
+	dc	cvac, x2
+	dsb	st
+	isb
+
+	/* This function does not return */
+1:
+	wfi
+	b	1b
+
+/*
+ * Part of SYSTEM_OFF
+ *
+ * This function turns off the SoC clocks
+ * Note: this function is not intended to return, and the only allowable
+ *       recovery is POR
+ * in:  none
+ * out: none
+ * uses x0, x1, x2, x3
+ */
+_soc_sys_off:
+	/*
+	 * Disable sec, spi and flexspi
+	 * TBD - Check if eNETC needs to be disabled
+	 */
+	ldr	x2, =NXP_DCFG_ADDR
+	ldr	x0, =DCFG_DEVDISR1_OFFSET
+	ldr	w1, =DCFG_DEVDISR1_SEC
+	str	w1, [x2, x0]
+	ldr	x0, =DCFG_DEVDISR4_OFFSET
+	ldr	w1, =DCFG_DEVDISR4_SPI_QSPI
+	str	w1, [x2, x0]
+
+	/* Set TPMWAKEMR0 */
+	ldr	x0, =TPMWAKEMR0_ADDR
+	mov	w1, #0x1
+	str	w1, [x0]
+
+	/* Disable icache, dcache, mmu @ EL1 */
+	mov	x1, #SCTLR_I_C_M_MASK
+	mrs	x0, sctlr_el1
+	bic	x0, x0, x1
+	msr	sctlr_el1, x0
+
+	/* Disable L2 prefetches */
+	mrs	x0, CPUECTLR_EL1
+	orr	x0, x0, #CPUECTLR_SMPEN_EN
+	bic	x0, x0, #CPUECTLR_TIMER_MASK
+	orr	x0, x0, #CPUECTLR_TIMER_2TICKS
+	msr	CPUECTLR_EL1, x0
+	dsb	sy
+	isb
+
+	/* Disable CCI snoop domain */
+	ldr	x0, =NXP_CCI_ADDR
+	mov	w1, #0x1
+	str	w1, [x0]
+
+	bl	get_pmu_idle_core_mask
+
+	/* x3 = pmu base addr */
+	mov	x3, #NXP_PMU_ADDR
+4:
+	ldr	w1, [x3, #PMU_PCPW20SR_OFFSET]
+	cmp	w1, w0
+	b.ne	4b
+
+	bl	get_pmu_idle_cluster_mask
+	mov	x3, #NXP_PMU_ADDR
+	str	w0, [x3, #PMU_CLAINACTSETR_OFFSET]
+
+	bl	get_pmu_idle_core_mask
+	mov	x3, #NXP_PMU_ADDR
+1:
+	ldr	w1, [x3, #PMU_PCPW20SR_OFFSET]
+	cmp	w1, w0
+	b.ne	1b
+
+	bl	get_pmu_flush_cluster_mask
+	mov	x3, #NXP_PMU_ADDR
+	str	w0, [x3, #PMU_CLL2FLUSHSETR_OFFSET]
+2:
+	ldr	w1, [x3, #PMU_CLL2FLUSHSR_OFFSET]
+	cmp	w1, w0
+	b.ne	2b
+
+	str	w0, [x3, #PMU_CLSL2FLUSHCLRR_OFFSET]
+
+	str	w0, [x3, #PMU_CLSINACTSETR_OFFSET]
+
+	mov	x2, #DAIF_SET_MASK
+	mrs	x1, spsr_el1
+	orr	x1, x1, x2
+	msr	spsr_el1, x1
+
+	mrs	x1, spsr_el2
+	orr	x1, x1, x2
+	msr	spsr_el2, x1
+
+	/* Force the debug interface to be quiescent */
+	mrs	x0, osdlr_el1
+	orr	x0, x0, #0x1
+	msr	osdlr_el1, x0
+
+	/* Invalidate all TLB entries at all 3 exception levels */
+	tlbi	alle1
+	tlbi	alle2
+	tlbi	alle3
+
+	/* x3 = pmu base addr */
+
+	/* Request lpm20 */
+	ldr	x0, =PMU_POWMGTCSR_OFFSET
+	ldr	w1, =PMU_POWMGTCSR_VAL
+	str	w1, [x3, x0]
+	isb
+	dsb	sy
+5:
+	wfe
+	b.eq	5b
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs SoC-specific programming prior to standby
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1
+ */
+_soc_core_prep_stdby:
+	/* Clear CPUECTLR_EL1[2:0] */
+	mrs	x1, CPUECTLR_EL1
+	bic	x1, x1, #CPUECTLR_TIMER_MASK
+	msr	CPUECTLR_EL1, x1
+
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function puts the calling core into standby state
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0
+ */
+_soc_core_entr_stdby:
+	/* X0 = core mask lsb */
+	dsb	sy
+	isb
+	wfi
+
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs any SoC-specific cleanup after standby state
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses none
+ */
+_soc_core_exit_stdby:
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs SoC-specific programming prior to power-down
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1, x2
+ */
+_soc_core_prep_pwrdn:
+	/* Make sure system counter is enabled */
+	ldr	x2, =NXP_TIMER_ADDR
+	ldr	w0, [x2, #SYS_COUNTER_CNTCR_OFFSET]
+	tst	w0, #SYS_COUNTER_CNTCR_EN
+	b.ne	1f
+	orr	w0, w0, #SYS_COUNTER_CNTCR_EN
+	str	w0, [x2, #SYS_COUNTER_CNTCR_OFFSET]
+1:
+	/*
+	 * Enable dynamic retention control (CPUECTLR[2:0])
+	 * Set the SMPEN bit (CPUECTLR[6])
+	 */
+	mrs	x1, CPUECTLR_EL1
+	bic	x1, x1, #CPUECTLR_RET_MASK
+	orr	x1, x1, #CPUECTLR_TIMER_2TICKS
+	orr	x1, x1, #CPUECTLR_SMPEN_EN
+	msr	CPUECTLR_EL1, x1
+
+	isb
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function puts the calling core into a power-down state
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0
+ */
+_soc_core_entr_pwrdn:
+	/* X0 = core mask lsb */
+	dsb	sy
+	isb
+	wfi
+
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs any SoC-specific cleanup after power-down state
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses none
+ */
+_soc_core_exit_pwrdn:
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs SoC-specific programming prior to standby
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1
+ */
+_soc_clstr_prep_stdby:
+	/* Clear CPUECTLR_EL1[2:0] */
+	mrs	x1, CPUECTLR_EL1
+	bic	x1, x1, #CPUECTLR_TIMER_MASK
+	msr	CPUECTLR_EL1, x1
+
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs any SoC-specific cleanup after standby state
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses none
+ */
+_soc_clstr_exit_stdby:
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs SoC-specific programming prior to power-down
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1, x2
+ */
+_soc_clstr_prep_pwrdn:
+	/* Make sure system counter is enabled */
+	ldr	x2, =NXP_TIMER_ADDR
+	ldr	w0, [x2, #SYS_COUNTER_CNTCR_OFFSET]
+	tst	w0, #SYS_COUNTER_CNTCR_EN
+	b.ne	1f
+	orr	w0, w0, #SYS_COUNTER_CNTCR_EN
+	str	w0, [x2, #SYS_COUNTER_CNTCR_OFFSET]
+1:
+	/*
+	 * Enable dynamic retention control (CPUECTLR[2:0])
+	 * Set the SMPEN bit (CPUECTLR[6])
+	 */
+	mrs	x1, CPUECTLR_EL1
+	bic	x1, x1, #CPUECTLR_RET_MASK
+	orr	x1, x1, #CPUECTLR_TIMER_2TICKS
+	orr	x1, x1, #CPUECTLR_SMPEN_EN
+	msr	CPUECTLR_EL1, x1
+
+	isb
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs any SoC-specific cleanup after power-down state
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses none
+ */
+_soc_clstr_exit_pwrdn:
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs SoC-specific programming prior to standby
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1
+ */
+_soc_sys_prep_stdby:
+	/* Clear CPUECTLR_EL1[2:0] */
+	mrs	x1, CPUECTLR_EL1
+	bic	x1, x1, #CPUECTLR_TIMER_MASK
+	msr	CPUECTLR_EL1, x1
+
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs any SoC-specific cleanup after standby state
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses none
+ */
+_soc_sys_exit_stdby:
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs SoC-specific programming prior to
+ * suspend-to-power-down
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1, x2, x3, x4
+ */
+_soc_sys_prep_pwrdn:
+	/* Set retention control */
+	mrs	x0, CPUECTLR_EL1
+	bic	x0, x0, #CPUECTLR_TIMER_MASK
+	orr	x0, x0, #CPUECTLR_TIMER_2TICKS
+	orr	x0, x0, #CPUECTLR_SMPEN_EN
+	msr	CPUECTLR_EL1, x0
+	dsb	sy
+	isb
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function puts the calling core, and potentially the soc, into a
+ * low-power state
+ * in:  x0 = core mask lsb
+ * out: x0 = 0, success
+ *      x0 < 0, failure
+ * uses x0, x1, x2, x3, x4, x5, x6, x7, x8, x9, x10, x13, x14, x15,
+ *      x16, x17, x18
+ */
+_soc_sys_pwrdn_wfi:
+	mov	x18, x30
+
+	mov	x3, #NXP_PMU_ADDR
+
+	/* x3 = pmu base addr */
+
+	/* Backup epu registers to stack */
+	ldr	x2, =NXP_EPU_ADDR
+	ldr	w4, [x2, #EPU_EPIMCR10_OFFSET]
+	ldr	w5, [x2, #EPU_EPCCR10_OFFSET]
+	ldr	w6, [x2, #EPU_EPCTR10_OFFSET]
+	ldr	w7, [x2, #EPU_EPGCR_OFFSET]
+	stp	x4,  x5,  [sp, #-16]!
+	stp	x6,  x7,  [sp, #-16]!
+
+	/*
+	 * x2 = epu base addr
+	 * x3 = pmu base addr
+	 */
+
+	/* Set up EPU event to receive the wake signal from PMU */
+	mov	w4, #EPU_EPIMCR10_VAL
+	mov	w5, #EPU_EPCCR10_VAL
+	mov	w6, #EPU_EPCTR10_VAL
+	mov	w7, #EPU_EPGCR_VAL
+	str	w4, [x2, #EPU_EPIMCR10_OFFSET]
+	str	w5, [x2, #EPU_EPCCR10_OFFSET]
+	str	w6, [x2, #EPU_EPCTR10_OFFSET]
+	str	w7, [x2, #EPU_EPGCR_OFFSET]
+
+	ldr	x2, =NXP_GICD_ADDR
+
+	/*
+	 * x2 = gicd base addr
+	 * x3 = pmu base addr
+	 */
+
+	/* Backup flextimer/mmc/usb interrupt router */
+	ldr	x0, =GICD_IROUTER60_OFFSET
+	ldr	x1, =GICD_IROUTER76_OFFSET
+	ldr	w4, [x2, x0]
+	ldr	w5, [x2, x1]
+	ldr	x0, =GICD_IROUTER112_OFFSET
+	ldr	x1, =GICD_IROUTER113_OFFSET
+	ldr	w6, [x2, x0]
+	ldr	w7, [x2, x1]
+	stp	x4,  x5,  [sp, #-16]!
+	stp	x6,  x7,  [sp, #-16]!
+
+	/*
+	 * x2 = gicd base addr
+	 * x3 = pmu base addr
+	 * x0 = GICD_IROUTER112_OFFSET
+	 * x1 = GICD_IROUTER113_OFFSET
+	 */
+
+	/* Re-route interrupt to cluster 1 */
+	ldr	w4, =GICD_IROUTER_VALUE
+	str	w4, [x2, x0]
+	str	w4, [x2, x1]
+	ldr	x0, =GICD_IROUTER60_OFFSET
+	ldr	x1, =GICD_IROUTER76_OFFSET
+	str	w4, [x2, x0]
+	str	w4, [x2, x1]
+	dsb	sy
+	isb
+
+	/* x3 = pmu base addr */
+
+	/* Disable sec, Check for eNETC, spi and qspi */
+	ldr	x2, =NXP_DCFG_ADDR
+	ldr	x0, =DCFG_DEVDISR1_OFFSET
+	ldr	w1, =DCFG_DEVDISR1_SEC
+	str	w1, [x2, x0]
+
+	ldr	x0, =DCFG_DEVDISR4_OFFSET
+	ldr	w1, =DCFG_DEVDISR4_SPI_QSPI
+	str	w1, [x2, x0]
+
+	/* x3 = pmu base addr */
+
+	/* Set TPMWAKEMR0 */
+	ldr	x0, =TPMWAKEMR0_ADDR
+	mov	w1, #0x1
+	str	w1, [x0]
+
+	/* Disable CCI snoop domain */
+	ldr	x0, =NXP_CCI_ADDR
+	mov	w1, #0x1
+	str	w1, [x0]
+
+	/* Setup retention control */
+	mrs	x0, CPUECTLR_EL1
+	orr	x0, x0, #CPUECTLR_SMPEN_EN
+	orr	x0, x0, #CPUECTLR_TIMER_2TICKS
+	msr	CPUECTLR_EL1, x0
+	dsb	sy
+	isb
+
+	bl	get_pmu_idle_core_mask
+	mov	x3, #NXP_PMU_ADDR
+8:
+	ldr	w1, [x3, #PMU_PCPW20SR_OFFSET]
+	cmp	w1, w0
+	b.ne	8b
+
+	/* x3 = NXP_PMU_ADDR */
+	/* 1 cluster SoC */
+
+	bl	get_pmu_idle_cluster_mask
+	mov	x3, #NXP_PMU_ADDR
+
+	str	w0, [x3, #PMU_CLAINACTSETR_OFFSET]
+
+	bl	get_pmu_idle_core_mask
+	/* x3 = NXP_PMU_ADDR */
+	mov	x3, #NXP_PMU_ADDR
+1:
+	ldr	w1, [x3, #PMU_PCPW20SR_OFFSET]
+	cmp	w1, w0
+	b.ne	1b
+
+	/* x3 = NXP_PMU_ADDR */
+	bl	get_pmu_flush_cluster_mask
+	mov	x3, #NXP_PMU_ADDR
+
+	str	w0, [x3, #PMU_CLL2FLUSHSETR_OFFSET]
+
+	/* x3 = NXP_PMU_ADDR */
+2:
+	ldr	w1, [x3, #PMU_CLL2FLUSHSR_OFFSET]
+	cmp	w1, w0
+	b.ne	2b
+
+	/* x3 = NXP_PMU_ADDR */
+
+	str	w0, [x3, #PMU_CLSL2FLUSHCLRR_OFFSET]
+
+	str	w0, [x3, #PMU_CLSINACTSETR_OFFSET]
+
+	/* Force the debug interface to be quiescent */
+	mrs	x0, osdlr_el1
+	orr	x0, x0, #0x1
+	msr	osdlr_el1, x0
+
+	/*
+	 * Enable the WakeRequest signal
+	 * x3 is cpu mask starting from cpu1 to cpu0
+	 */
+	bl	get_tot_num_cores
+	sub	x0, x0, #1
+	mov	x3, #0x1
+	lsl	x3, x3, x0
+2:
+	mov	x0, x3
+	bl	get_gic_rd_base  // 0-2
+	ldr	w1, [x0, #GICR_WAKER_OFFSET]
+	orr	w1, w1, #GICR_WAKER_SLEEP_BIT
+	str	w1, [x0, #GICR_WAKER_OFFSET]
+1:
+	ldr	w1, [x0, #GICR_WAKER_OFFSET]
+	cmp	w1, #GICR_WAKER_ASLEEP
+	b.ne	1b
+
+	lsr	x3, x3, #1
+	cbnz	x3, 2b
+
+	/* Invalidate all TLB entries at all 3 exception levels */
+	tlbi	alle1
+	tlbi	alle2
+	tlbi	alle3
+
+	/* Request lpm20 */
+	mov	x3, #NXP_PMU_ADDR
+	ldr	x0, =PMU_POWMGTCSR_OFFSET
+	ldr	w1, =PMU_POWMGTCSR_VAL
+	str	w1, [x3, x0]
+
+	ldr	x5, =NXP_EPU_ADDR
+4:
+	wfe
+	ldr	w1, [x5, #EPU_EPCTR10_OFFSET]
+	cmp	w1, #0
+	b.eq	4b
+
+	/* x3 = NXP_PMU_ADDR */
+
+	bl	get_pmu_idle_cluster_mask
+	mov	x3, NXP_PMU_ADDR
+
+	/* Re-enable the GPP ACP */
+	str	w0, [x3, #PMU_CLAINACTCLRR_OFFSET]
+	str	w0, [x3, #PMU_CLSINACTCLRR_OFFSET]
+
+	/* x3 = NXP_PMU_ADDR */
+3:
+	ldr	w1, [x3, #PMU_CLAINACTSETR_OFFSET]
+	cbnz	w1, 3b
+4:
+	ldr	w1, [x3, #PMU_CLSINACTSETR_OFFSET]
+	cbnz	w1, 4b
+
+	/*
+	 * Enable the WakeRequest signal on cpu 0-1
+	 * x3 is cpu mask starting from cpu1
+	 */
+	bl	get_tot_num_cores
+	sub	x0, x0, #1
+	mov	x3, #0x1
+	lsl	x3, x3, x0
+2:
+	mov	x0, x3
+	bl	get_gic_rd_base  // 0-2
+	ldr	w1, [x0, #GICR_WAKER_OFFSET]
+	bic	w1, w1, #GICR_WAKER_SLEEP_BIT
+	str	w1, [x0, #GICR_WAKER_OFFSET]
+1:
+	ldr	w1, [x0, #GICR_WAKER_OFFSET]
+	cbnz	w1, 1b
+
+	lsr	x3, x3, #1
+	cbnz	x3, 2b
+
+	/* Enable CCI snoop domain */
+	ldr	x0, =NXP_CCI_ADDR
+	str	wzr, [x0]
+	dsb	sy
+	isb
+
+	ldr	x3, =NXP_EPU_ADDR
+
+	/* x3 = epu base addr */
+
+	/* Enable sec, enetc, spi and qspi */
+	ldr	x2, =NXP_DCFG_ADDR
+	str	wzr, [x2, #DCFG_DEVDISR1_OFFSET]
+	str	wzr, [x2, #DCFG_DEVDISR2_OFFSET]
+	str	wzr, [x2, #DCFG_DEVDISR4_OFFSET]
+
+	/* Restore flextimer/mmc/usb interrupt router */
+	ldr	x3, =NXP_GICD_ADDR
+	ldp	x0, x2, [sp], #16
+	ldr	x1, =GICD_IROUTER113_OFFSET
+	str	w2, [x3, x1]
+	ldr	x1, =GICD_IROUTER112_OFFSET
+	str	w0, [x3, x1]
+	ldp	x0, x2, [sp], #16
+	ldr	x1, =GICD_IROUTER76_OFFSET
+	str	w2, [x3, x1]
+	ldr	x1, =GICD_IROUTER60_OFFSET
+	str	w0, [x3, x1]
+
+	/* Restore EPU registers */
+	ldr	x3, =NXP_EPU_ADDR
+	ldp	x0, x2, [sp], #16
+	str	w2, [x3, #EPU_EPGCR_OFFSET]
+	str	w0, [x3, #EPU_EPCTR10_OFFSET]
+	ldp	x2, x1, [sp], #16
+	str	w1, [x3, #EPU_EPCCR10_OFFSET]
+	str	w2, [x3, #EPU_EPIMCR10_OFFSET]
+
+	dsb	sy
+	isb
+	mov	x30, x18
+	ret
+
+/*
+ * Part of CPU_SUSPEND
+ *
+ * This function performs any SoC-specific cleanup after power-down
+ * in:  x0 = core mask lsb
+ * out: none
+ * uses x0, x1
+ */
+_soc_sys_exit_pwrdn:
+	/* Enable stack alignment checking */
+	mrs	x1, SCTLR_EL1
+	orr	x1, x1, #0x4
+	msr	SCTLR_EL1, x1
+
+	/* Enable debug interface */
+	mrs	x1, osdlr_el1
+	bic	x1, x1, #OSDLR_EL1_DLK_LOCK
+	msr	osdlr_el1, x1
+
+	/* Enable i-cache */
+	mrs	x1, SCTLR_EL3
+	orr	x1, x1, #SCTLR_I_MASK
+	msr	SCTLR_EL3, x1
+
+	isb
+	ret
+
+/*
+ * This function setc up the TrustZone Address Space Controller (TZASC)
+ * in:  none
+ * out: none
+ * uses x0, x1
+ */
+init_tzpc:
+	/* Set Non Secure access for all devices protected via TZPC */
+	ldr	x1, =TZPCDECPROT_0_SET_BASE   /* decode Protection-0 Set Reg */
+	mov	w0, #0xFF		      /* set decode region to NS, Bits[7:0] */
+	str	w0, [x1]
+
+	ldr	x1, =TZPCDECPROT_1_SET_BASE   /* decode Protection-1 Set Reg */
+	mov	w0, #0xFF		      /* set decode region to NS, Bits[7:0] */
+	str	w0, [x1]
+
+	ldr	x1, =TZPCDECPROT_2_SET_BASE   /* decode Protection-2 Set Reg */
+	mov	w0, #0xFF		      /* set decode region to NS, Bits[7:0] */
+	str	w0, [x1]
+
+	 /* entire SRAM as NS */
+	ldr	x1, =NXP_OCRAM_TZPC_ADDR      /* secure RAM region size Reg */
+	mov	w0, #0x00000000		      /* 0x00000000 = no secure region */
+	str	w0, [x1]
+
+	ret
+
+/*
+ * This function performs any needed initialization on SecMon for
+ * boot services
+ */
+initSecMon:
+	/* Read the register hpcomr */
+	ldr	x1, =NXP_SNVS_ADDR
+	ldr	w0, [x1, #SECMON_HPCOMR_OFFSET]
+	/* Turn off secure access for the privileged registers */
+	orr	w0, w0, #SECMON_HPCOMR_NPSWAEN
+	/* Write back */
+	str	w0, [x1, #SECMON_HPCOMR_OFFSET]
+
+	ret
+
+/*
+ * This function checks to see if cores which are to be disabled have been
+ * released from reset - if not, it releases them
+ * in:  none
+ * out: none
+ * uses x0, x1, x2, x3, x4, x5, x6, x7, x8
+ */
+release_disabled:
+	stp	x18, x30, [sp, #-16]!
+
+	/*
+	 * Get the number of cpus on this device
+	 * Calling the below c function.
+	 * No need to Callee saved registers x9-x15,
+	 * as these registers are not used by the callee
+	 * prior to calling the below C-routine.
+	 */
+	bl	get_tot_num_cores
+	mov	x6, x0
+
+	/* Read COREDISABLESR */
+	mov	x0, #NXP_DCFG_ADDR
+	ldr	w4, [x0, #DCFG_COREDISABLEDSR_OFFSET]
+
+	mov	x0, #NXP_RESET_ADDR
+	ldr	w5, [x0, #BRR_OFFSET]
+
+	/* Load the core mask for the first core */
+	mov	x7, #1
+
+	/*
+	 * x4 = COREDISABLESR
+	 * x5 = BRR
+	 * x6 = loop count
+	 * x7 = core mask bit
+	 */
+2:
+	/* Check if the core is to be disabled */
+	tst	x4, x7
+	b.eq	1f
+
+	/* See if disabled cores have already been released from reset */
+	tst	x5, x7
+	b.ne	1f
+
+	/* If core has not been released, then release it (0-3) */
+	mov	x0, x7
+	bl	_soc_core_release
+
+	/* Record the core state in the data area (0-3) */
+	mov	x0, x7
+	mov	x1, #CORE_DISABLED
+	bl	_setCoreState
+1:
+	/* Decrement the counter */
+	subs	x6, x6, #1
+	b.le	3f
+	/* Shift the core mask to the next core */
+	lsl	x7, x7, #1
+	/* Continue */
+	b	2b
+3:
+	ldp	x18, x30, [sp], #16
+	ret
+
+/*
+ * Write a register in the DCFG block
+ * in:  x0 = offset
+ * in:  w1 = value to write
+ * uses x0, x1, x2
+ */
+_write_reg_dcfg:
+	ldr	x2, =NXP_DCFG_ADDR
+	str	w1, [x2, x0]
+	ret
+
+/*
+ * Read a register in the DCFG block
+ * in:  x0 = offset
+ * out: w0 = value read
+ * uses x0, x1, x2
+ */
+_read_reg_dcfg:
+	ldr	x2, =NXP_DCFG_ADDR
+	ldr	w1, [x2, x0]
+	mov	w0, w1
+	ret
+
+/*
+ * This function returns an mpidr value for a core, given a core_mask_lsb
+ * in:  x0 = core mask lsb
+ * out: x0 = affinity2:affinity1:affinity0, where affinity is 8-bits
+ * uses x0, x1
+ */
+get_mpidr_value:
+	/* Convert a core mask to an SoC core number */
+	clz	w0, w0
+	mov	w1, #31
+	sub	w0, w1, w0
+
+	/* Get the mpidr core number from the SoC core number */
+	mov	w1, wzr
+	tst	x0, #1
+	b.eq	1f
+	orr	w1, w1, #1
+1:
+	/* Extract the cluster number */
+	lsr	w0, w0, #1
+	orr	w0, w1, w0, lsl #8
+
+	ret
+
+/*
+ * This function returns the redistributor base address for the core specified
+ * in x1
+ * in:  x0 - core mask lsb of specified core
+ * out: x0 = redistributor rd base address for specified core
+ * uses x0, x1, x2
+ */
+get_gic_rd_base:
+	/* Get the 0-based core number */
+	clz	w1, w0
+	mov	w2, #0x20
+	sub	w2, w2, w1
+	sub	w2, w2, #1
+
+	/* x2 = core number / loop counter */
+	ldr	x0, =NXP_GICR_ADDR
+	mov	x1, #GIC_RD_OFFSET
+2:
+	cbz	x2, 1f
+	add	x0, x0, x1
+	sub	x2, x2, #1
+	b	2b
+1:
+	ret
+
+/*
+ * This function returns the redistributor base address for the core specified
+ * in x1
+ * in:  x0 - core mask lsb of specified core
+ * out: x0 = redistributor sgi base address for specified core
+ * uses x0, x1, x2
+ */
+get_gic_sgi_base:
+	/* Get the 0-based core number */
+	clz	w1, w0
+	mov	w2, #0x20
+	sub	w2, w2, w1
+	sub	w2, w2, #1
+
+	/* x2 = core number / loop counter */
+	ldr	x0, =NXP_GICR_SGI_ADDR
+	mov	x1, #GIC_SGI_OFFSET
+2:
+	cbz	x2, 1f
+	add	x0, x0, x1
+	sub	x2, x2, #1
+	b	2b
+1:
+	ret
+
+/*
+ * Write a register in the RESET block
+ * in:  x0 = offset
+ * in:  w1 = value to write
+ * uses x0, x1, x2
+ */
+_write_reg_reset:
+	ldr	x2, =NXP_RESET_ADDR
+	str	w1, [x2, x0]
+	ret
+
+/*
+ * Read a register in the RESET block
+ * in:  x0 = offset
+ * out: w0 = value read
+ * uses x0, x1
+ */
+_read_reg_reset:
+	ldr	x1, =NXP_RESET_ADDR
+	ldr	w0, [x1, x0]
+	ret
diff --git a/plat/nxp/soc-ls1028a/aarch64/ls1028a_helpers.S b/plat/nxp/soc-ls1028a/aarch64/ls1028a_helpers.S
new file mode 100644
index 0000000..ec67529
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/aarch64/ls1028a_helpers.S
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2018-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+
+#include <platform_def.h>
+
+.globl	plat_secondary_cold_boot_setup
+.globl	plat_is_my_cpu_primary
+.globl	plat_reset_handler
+.globl  platform_mem_init
+
+func platform_mem1_init
+	ret
+endfunc platform_mem1_init
+
+func platform_mem_init
+	ret
+endfunc	platform_mem_init
+
+func apply_platform_errata
+	ret
+endfunc apply_platform_errata
+
+func plat_reset_handler
+	mov	x29, x30
+	bl	apply_platform_errata
+
+#if defined(IMAGE_BL31)
+	ldr	x0, =POLICY_SMMU_PAGESZ_64K
+	cbz	x0, 1f
+	/* Set the SMMU page size in the sACR register */
+	bl	_set_smmu_pagesz_64
+#endif
+1:
+	mov	x30, x29
+	ret
+endfunc plat_reset_handler
+
+/*
+ * void plat_secondary_cold_boot_setup (void);
+ *
+ * This function performs any platform specific actions
+ * needed for a secondary cpu after a cold reset e.g
+ * mark the cpu's presence, mechanism to place it in a
+ * holding pen etc.
+ */
+func plat_secondary_cold_boot_setup
+	/* ls1028a does not do cold boot for secondary CPU */
+cb_panic:
+	b	cb_panic
+endfunc plat_secondary_cold_boot_setup
+
+/*
+ * unsigned int plat_is_my_cpu_primary (void);
+ *
+ * Find out whether the current cpu is the primary
+ * cpu.
+ */
+func plat_is_my_cpu_primary
+	mrs	x0, mpidr_el1
+	and	x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
+	cmp	x0, 0x0
+	cset	w0, eq
+	ret
+endfunc plat_is_my_cpu_primary