diff --git a/drivers/marvell/comphy/phy-default-porting-layer.h b/drivers/marvell/comphy/phy-default-porting-layer.h
new file mode 100644
index 0000000..39cd181
--- /dev/null
+++ b/drivers/marvell/comphy/phy-default-porting-layer.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+#ifndef __PHY_DEFAULT_PORTING_LAYER_H
+#define __PHY_DEFAULT_PORTING_LAYER_H
+
+
+#define MAX_LANE_NR		6
+
+#warning "Using default comphy params - you may need to suit them to your board"
+
+static const struct xfi_params
+	xfi_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = {
+	[0 ... AP_NUM-1][0 ... CP_NUM-1][0 ... MAX_LANE_NR-1] = {
+		.g1_ffe_res_sel = 0x3, .g1_ffe_cap_sel = 0xf, .align90 = 0x5f,
+		.g1_dfe_res = 0x2, .g1_amp = 0x1c, .g1_emph = 0xe,
+		.g1_emph_en = 0x1, .g1_tx_amp_adj = 0x1, .g1_tx_emph_en = 0x1,
+		.g1_tx_emph = 0x0, .g1_rx_selmuff = 0x1, .g1_rx_selmufi = 0x0,
+		.g1_rx_selmupf = 0x2, .g1_rx_selmupi = 0x2, .valid = 1
+	}
+};
+
+static const struct sata_params
+	sata_static_values_tab[AP_NUM][CP_NUM][MAX_LANE_NR] = {
+	[0 ... AP_NUM-1][0 ... CP_NUM-1][0 ... MAX_LANE_NR-1] = {
+		.g1_amp = 0x8, .g2_amp = 0xa, .g3_amp = 0x1e,
+		.g1_emph = 0x1, .g2_emph = 0x2, .g3_emph = 0xe,
+		.g1_emph_en = 0x1, .g2_emph_en = 0x1, .g3_emph_en = 0x1,
+		.g1_tx_amp_adj = 0x1, .g2_tx_amp_adj = 0x1,
+		.g3_tx_amp_adj = 0x1,
+		.g1_tx_emph_en = 0x0, .g2_tx_emph_en = 0x0,
+		.g3_tx_emph_en = 0x0,
+		.g1_tx_emph = 0x1, .g2_tx_emph = 0x1, .g3_tx_emph = 0x1,
+		.g3_dfe_res = 0x1, .g3_ffe_res_sel = 0x4, .g3_ffe_cap_sel = 0xf,
+		.align90 = 0x61,
+		.g1_rx_selmuff = 0x3, .g2_rx_selmuff = 0x3,
+		.g3_rx_selmuff = 0x3,
+		.g1_rx_selmufi = 0x0, .g2_rx_selmufi = 0x0,
+		.g3_rx_selmufi = 0x3,
+		.g1_rx_selmupf = 0x1, .g2_rx_selmupf = 0x1,
+		.g3_rx_selmupf = 0x2,
+		.g1_rx_selmupi = 0x0, .g2_rx_selmupi = 0x0,
+		.g3_rx_selmupi = 0x2,
+		.valid = 0x1
+	},
+};
+#endif /* __PHY_DEFAULT_PORTING_LAYER_H */