#
# Copyright 2022 NXP
#
# SPDX-License-Identifier: BSD-3-Clause
#
#
#------------------------------------------------------------------------------
#
# This file contains the basic architecture definitions that drive the build
#
# -----------------------------------------------------------------------------

CORE_TYPE		:=	a53

CACHE_LINE		:=	6

# Set to GIC400 or GIC500
GIC			:=	GIC500

# Set to CCI400 or CCN504 or CCN508
INTERCONNECT		:=	CCI400

# Select the DDR PHY generation to be used
PLAT_DDR_PHY		:=	PHY_GEN1

PHYS_SYS		:=	64

# Indicate layerscape chassis level - set to 3=LSCH3 or 2=LSCH2
CHASSIS			:=	3

# TZC IP Details TZC used is TZC380 or TZC400
TZC_ID			:=	TZC400

# CONSOLE Details available is NS16550 or PL011
CONSOLE			:=	NS16550

NXP_SFP_VER		:=	3_4

# In IMAGE_BL2, compile time flag for handling Cache coherency
# with CAAM for BL2 running from OCRAM
SEC_MEM_NON_COHERENT	:=	yes


# OCRAM MAP for BL2
# Before BL2
# 0x18000000 - 0x18009fff -> Used by ROM code, (TBD - can it be used for xlat tables)
# 0x1800a000 - 0x1801Cfff -> Reserved for BL2 binary (76 KB)
# 0x1801D000 - 0x1801ffff -> CSF header for BL2 (12 KB)
OCRAM_START_ADDR	:=	0x18000000
OCRAM_SIZE		:=	0x20000

CSF_HDR_SZ		:=	0x3000

# Area of OCRAM reserved by ROM code
NXP_ROM_RSVD		:=	0xa000

# Input to CST create_hdr_isbc tool
BL2_HDR_LOC		:=	0x1801D000

# Location of BL2 on OCRAM
# BL2_BASE=OCRAM_START_ADDR+NXP_ROM_RSVD
BL2_BASE		:=	0x1800a000

# SoC ERRATUM to be enabled

# ARM Erratum
ERRATA_A53_855873	:=	1

# DDR Erratum
ERRATA_DDR_A008511	:=	1
ERRATA_DDR_A009803	:=	1
ERRATA_DDR_A009942	:=	1
ERRATA_DDR_A010165	:=	1

# Define Endianness of each module
NXP_ESDHC_ENDIANNESS	:=	LE
NXP_SFP_ENDIANNESS	:=	LE
NXP_GPIO_ENDIANNESS	:=	LE
NXP_SNVS_ENDIANNESS	:=	LE
NXP_GUR_ENDIANNESS	:=	LE
NXP_SEC_ENDIANNESS	:=	LE
NXP_DDR_ENDIANNESS	:=	LE
NXP_QSPI_ENDIANNESS	:=	LE

# OCRAM ECC Enabled
OCRAM_ECC_EN		:=	yes