diff --git a/plat/allwinner/sun50i_h616/sunxi_power.c b/plat/allwinner/sun50i_h616/sunxi_power.c
new file mode 100644
index 0000000..dd6ebba
--- /dev/null
+++ b/plat/allwinner/sun50i_h616/sunxi_power.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) 2017-2020, ARM Limited. All rights reserved.
+ * Copyright (c) 2018, Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+#include <string.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/allwinner/axp.h>
+#include <drivers/allwinner/sunxi_rsb.h>
+#include <lib/mmio.h>
+
+#include <sunxi_cpucfg.h>
+#include <sunxi_def.h>
+#include <sunxi_mmap.h>
+#include <sunxi_private.h>
+
+#define AXP305_I2C_ADDR	0x36
+#define AXP305_HW_ADDR	0x745
+#define AXP305_RT_ADDR	0x3a
+
+static enum pmic_type {
+	UNKNOWN,
+	AXP305,
+} pmic;
+
+int axp_read(uint8_t reg)
+{
+	return rsb_read(AXP305_RT_ADDR, reg);
+}
+
+int axp_write(uint8_t reg, uint8_t val)
+{
+	return rsb_write(AXP305_RT_ADDR, reg, val);
+}
+
+static int rsb_init(void)
+{
+	int ret;
+
+	ret = rsb_init_controller();
+	if (ret)
+		return ret;
+
+	/* Switch to the recommended 3 MHz bus clock. */
+	ret = rsb_set_bus_speed(SUNXI_OSC24M_CLK_IN_HZ, 3000000);
+	if (ret)
+		return ret;
+
+	/* Initiate an I2C transaction to switch the PMIC to RSB mode. */
+	ret = rsb_set_device_mode(AXP20X_MODE_RSB << 16 | AXP20X_MODE_REG << 8);
+	if (ret)
+		return ret;
+
+	/* Associate the 8-bit runtime address with the 12-bit bus address. */
+	ret = rsb_assign_runtime_address(AXP305_HW_ADDR, AXP305_RT_ADDR);
+	if (ret)
+		return ret;
+
+	return axp_check_id();
+}
+
+int sunxi_pmic_setup(uint16_t socid, const void *fdt)
+{
+	int ret;
+
+	INFO("PMIC: Probing AXP305 on RSB\n");
+
+	ret = sunxi_init_platform_r_twi(socid, true);
+	if (ret) {
+		INFO("Could not init platform bus: %d\n", ret);
+		return ret;
+	}
+
+	ret = rsb_init();
+	if (ret) {
+		INFO("Could not init RSB: %d\n", ret);
+		return ret;
+	}
+
+	pmic = AXP305;
+	axp_setup_regulators(fdt);
+
+	/* Switch the PMIC back to I2C mode. */
+	ret = axp_write(AXP20X_MODE_REG, AXP20X_MODE_I2C);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+void sunxi_power_down(void)
+{
+	switch (pmic) {
+	case AXP305:
+		/* Re-initialise after rich OS might have used it. */
+		sunxi_init_platform_r_twi(SUNXI_SOC_H616, true);
+		rsb_init();
+		axp_power_off();
+		break;
+	default:
+		break;
+	}
+}
+
+void sunxi_cpu_power_off_self(void)
+{
+	u_register_t mpidr = read_mpidr();
+	unsigned int core  = MPIDR_AFFLVL0_VAL(mpidr);
+
+	/* Enable the CPUIDLE hardware (only really needs to be done once). */
+	mmio_write_32(SUNXI_CPUIDLE_EN_REG, 0x16aa0000);
+	mmio_write_32(SUNXI_CPUIDLE_EN_REG, 0xaa160001);
+
+	/* Trigger power off for this core. */
+	mmio_write_32(SUNXI_CORE_CLOSE_REG, BIT_32(core));
+}