fix(tree): correct some typos
found using codespell (https://github.com/codespell-project/codespell).
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I1bfa797e3460adddeefa916bb68e22beddaf6373
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.c b/drivers/marvell/comphy/phy-comphy-cp110.c
index fa9fe41..e256fa7 100644
--- a/drivers/marvell/comphy/phy-comphy-cp110.c
+++ b/drivers/marvell/comphy/phy-comphy-cp110.c
@@ -2053,7 +2053,7 @@
mask |= HPIPE_LANE_CFG4_SSC_CTRL_MASK;
data |= 0x1 << HPIPE_LANE_CFG4_SSC_CTRL_OFFSET;
reg_set(hpipe_addr + HPIPE_LANE_CFG4_REG, data, mask);
- /* Confifure SSC amplitude */
+ /* Configure SSC amplitude */
mask = HPIPE_G2_TX_SSC_AMP_MASK;
data = 0x1f << HPIPE_G2_TX_SSC_AMP_OFFSET;
reg_set(hpipe_addr + HPIPE_G2_SET_2_REG, data, mask);
diff --git a/drivers/marvell/gwin.c b/drivers/marvell/gwin.c
index fa59cb0..40f8c93 100644
--- a/drivers/marvell/gwin.c
+++ b/drivers/marvell/gwin.c
@@ -213,7 +213,7 @@
* remote AP should be accompanied with proper configuration to
* GWIN registers group and therefore the GWIN Miss feature
* should be set into Bypass mode, need to make sure all GWIN regions
- * are defined correctly that will assure no GWIN miss occurrance
+ * are defined correctly that will assure no GWIN miss occurrence
* JIRA-AURORA2-1630
*/
INFO("Update GWIN miss bypass\n");
diff --git a/drivers/marvell/mg_conf_cm3/mg_conf_cm3.c b/drivers/marvell/mg_conf_cm3/mg_conf_cm3.c
index 98e1896..9352437 100644
--- a/drivers/marvell/mg_conf_cm3/mg_conf_cm3.c
+++ b/drivers/marvell/mg_conf_cm3/mg_conf_cm3.c
@@ -55,7 +55,7 @@
/* Don't release MG CM3 from reset - it will be done by next step
* bootloader (e.g. U-Boot), when appriopriate device-tree setup (which
- * has enabeld 802.3. auto-neg) will be choosen.
+ * has enabeld 802.3. auto-neg) will be chosen.
*/
return 0;