SPM: Move all SP-related info to SP context struct
Move all information related to a Secure Partition to the struct
secure_partition_context_t.
This requires an in-depth refactor because most of the previous code of
SPM relied on global information.
Change-Id: I0a23e93817dcc191ce1d7506b8bc671d376123c4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
diff --git a/services/std_svc/spm/sp_setup.c b/services/std_svc/spm/sp_setup.c
new file mode 100644
index 0000000..de031d8
--- /dev/null
+++ b/services/std_svc/spm/sp_setup.c
@@ -0,0 +1,300 @@
+/*
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <assert.h>
+#include <common_def.h>
+#include <context.h>
+#include <context_mgmt.h>
+#include <debug.h>
+#include <platform_def.h>
+#include <platform.h>
+#include <secure_partition.h>
+#include <string.h>
+#include <xlat_tables_v2.h>
+
+#include "spm_private.h"
+#include "spm_shim_private.h"
+
+/* Setup context of the Secure Partition */
+void secure_partition_setup(secure_partition_context_t *sp_ctx)
+{
+ cpu_context_t *ctx = &(sp_ctx->cpu_ctx);
+
+ /*
+ * Initialize CPU context
+ * ----------------------
+ */
+
+ entry_point_info_t ep_info = {0};
+
+ SET_PARAM_HEAD(&ep_info, PARAM_EP, VERSION_1, SECURE | EP_ST_ENABLE);
+ ep_info.pc = BL32_BASE;
+ ep_info.spsr = SPSR_64(MODE_EL0, MODE_SP_EL0, DISABLE_ALL_EXCEPTIONS);
+
+ cm_setup_context(ctx, &ep_info);
+
+ /*
+ * General-Purpose registers
+ * -------------------------
+ */
+
+ /*
+ * X0: Virtual address of a buffer shared between EL3 and Secure EL0.
+ * The buffer will be mapped in the Secure EL1 translation regime
+ * with Normal IS WBWA attributes and RO data and Execute Never
+ * instruction access permissions.
+ *
+ * X1: Size of the buffer in bytes
+ *
+ * X2: cookie value (Implementation Defined)
+ *
+ * X3: cookie value (Implementation Defined)
+ *
+ * X4 to X30 = 0 (already done by cm_init_my_context())
+ */
+ write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X0, PLAT_SPM_BUF_BASE);
+ write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X1, PLAT_SPM_BUF_SIZE);
+ write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X2, PLAT_SPM_COOKIE_0);
+ write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X3, PLAT_SPM_COOKIE_1);
+
+ /*
+ * SP_EL0: A non-zero value will indicate to the SP that the SPM has
+ * initialized the stack pointer for the current CPU through
+ * implementation defined means. The value will be 0 otherwise.
+ */
+ write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_SP_EL0,
+ PLAT_SP_IMAGE_STACK_BASE + PLAT_SP_IMAGE_STACK_PCPU_SIZE);
+
+ /*
+ * Setup translation tables
+ * ------------------------
+ */
+
+#if ENABLE_ASSERTIONS
+
+ /* Get max granularity supported by the platform. */
+
+ u_register_t id_aa64mmfr0_el1 = read_id_aa64mmfr0_el1();
+
+ int tgran64_supported =
+ ((id_aa64mmfr0_el1 >> ID_AA64MMFR0_EL1_TGRAN64_SHIFT) &
+ ID_AA64MMFR0_EL1_TGRAN64_MASK) ==
+ ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED;
+
+ int tgran16_supported =
+ ((id_aa64mmfr0_el1 >> ID_AA64MMFR0_EL1_TGRAN16_SHIFT) &
+ ID_AA64MMFR0_EL1_TGRAN16_MASK) ==
+ ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED;
+
+ int tgran4_supported =
+ ((id_aa64mmfr0_el1 >> ID_AA64MMFR0_EL1_TGRAN4_SHIFT) &
+ ID_AA64MMFR0_EL1_TGRAN4_MASK) ==
+ ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED;
+
+ uintptr_t max_granule_size;
+
+ if (tgran64_supported) {
+ max_granule_size = 64 * 1024;
+ } else if (tgran16_supported) {
+ max_granule_size = 16 * 1024;
+ } else {
+ assert(tgran4_supported);
+ max_granule_size = 4 * 1024;
+ }
+
+ VERBOSE("Max translation granule supported: %lu KiB\n",
+ max_granule_size / 1024);
+
+ uintptr_t max_granule_size_mask = max_granule_size - 1;
+
+ /* Base must be aligned to the max granularity */
+ assert((ARM_SP_IMAGE_NS_BUF_BASE & max_granule_size_mask) == 0);
+
+ /* Size must be a multiple of the max granularity */
+ assert((ARM_SP_IMAGE_NS_BUF_SIZE & max_granule_size_mask) == 0);
+
+#endif /* ENABLE_ASSERTIONS */
+
+ /* This region contains the exception vectors used at S-EL1. */
+ const mmap_region_t sel1_exception_vectors =
+ MAP_REGION_FLAT(SPM_SHIM_EXCEPTIONS_START,
+ SPM_SHIM_EXCEPTIONS_SIZE,
+ MT_CODE | MT_SECURE | MT_PRIVILEGED);
+ mmap_add_region_ctx(sp_ctx->xlat_ctx_handle,
+ &sel1_exception_vectors);
+
+ mmap_add_ctx(sp_ctx->xlat_ctx_handle,
+ plat_get_secure_partition_mmap(NULL));
+
+ init_xlat_tables_ctx(sp_ctx->xlat_ctx_handle);
+
+ /*
+ * MMU-related registers
+ * ---------------------
+ */
+
+ /* Set attributes in the right indices of the MAIR */
+ u_register_t mair_el1 =
+ MAIR_ATTR_SET(ATTR_DEVICE, ATTR_DEVICE_INDEX) |
+ MAIR_ATTR_SET(ATTR_IWBWA_OWBWA_NTR, ATTR_IWBWA_OWBWA_NTR_INDEX) |
+ MAIR_ATTR_SET(ATTR_NON_CACHEABLE, ATTR_NON_CACHEABLE_INDEX);
+
+ write_ctx_reg(get_sysregs_ctx(ctx), CTX_MAIR_EL1, mair_el1);
+
+ /* Setup TCR_EL1. */
+ u_register_t tcr_ps_bits = tcr_physical_addr_size_bits(PLAT_PHY_ADDR_SPACE_SIZE);
+
+ u_register_t tcr_el1 =
+ /* Size of region addressed by TTBR0_EL1 = 2^(64-T0SZ) bytes. */
+ (64 - __builtin_ctzl(PLAT_VIRT_ADDR_SPACE_SIZE)) |
+ /* Inner and outer WBWA, shareable. */
+ TCR_SH_INNER_SHAREABLE | TCR_RGN_OUTER_WBA | TCR_RGN_INNER_WBA |
+ /* Set the granularity to 4KB. */
+ TCR_TG0_4K |
+ /* Limit Intermediate Physical Address Size. */
+ tcr_ps_bits << TCR_EL1_IPS_SHIFT |
+ /* Disable translations using TBBR1_EL1. */
+ TCR_EPD1_BIT
+ /* The remaining fields related to TBBR1_EL1 are left as zero. */
+ ;
+
+ tcr_el1 &= ~(
+ /* Enable translations using TBBR0_EL1 */
+ TCR_EPD0_BIT
+ );
+
+ write_ctx_reg(get_sysregs_ctx(ctx), CTX_TCR_EL1, tcr_el1);
+
+ /* Setup SCTLR_EL1 */
+ u_register_t sctlr_el1 = read_ctx_reg(get_sysregs_ctx(ctx), CTX_SCTLR_EL1);
+
+ sctlr_el1 |=
+ /*SCTLR_EL1_RES1 |*/
+ /* Don't trap DC CVAU, DC CIVAC, DC CVAC, DC CVAP, or IC IVAU */
+ SCTLR_UCI_BIT |
+ /* RW regions at xlat regime EL1&0 are forced to be XN. */
+ SCTLR_WXN_BIT |
+ /* Don't trap to EL1 execution of WFI or WFE at EL0. */
+ SCTLR_NTWI_BIT | SCTLR_NTWE_BIT |
+ /* Don't trap to EL1 accesses to CTR_EL0 from EL0. */
+ SCTLR_UCT_BIT |
+ /* Don't trap to EL1 execution of DZ ZVA at EL0. */
+ SCTLR_DZE_BIT |
+ /* Enable SP Alignment check for EL0 */
+ SCTLR_SA0_BIT |
+ /* Allow cacheable data and instr. accesses to normal memory. */
+ SCTLR_C_BIT | SCTLR_I_BIT |
+ /* Alignment fault checking enabled when at EL1 and EL0. */
+ SCTLR_A_BIT |
+ /* Enable MMU. */
+ SCTLR_M_BIT
+ ;
+
+ sctlr_el1 &= ~(
+ /* Explicit data accesses at EL0 are little-endian. */
+ SCTLR_E0E_BIT |
+ /* Accesses to DAIF from EL0 are trapped to EL1. */
+ SCTLR_UMA_BIT
+ );
+
+ write_ctx_reg(get_sysregs_ctx(ctx), CTX_SCTLR_EL1, sctlr_el1);
+
+ uint64_t *xlat_base =
+ ((xlat_ctx_t *)sp_ctx->xlat_ctx_handle)->base_table;
+
+ /* Point TTBR0_EL1 at the tables of the context created for the SP. */
+ write_ctx_reg(get_sysregs_ctx(ctx), CTX_TTBR0_EL1,
+ (u_register_t)xlat_base);
+
+ /*
+ * Setup other system registers
+ * ----------------------------
+ */
+
+ /* Shim Exception Vector Base Address */
+ write_ctx_reg(get_sysregs_ctx(ctx), CTX_VBAR_EL1,
+ SPM_SHIM_EXCEPTIONS_PTR);
+
+ /*
+ * FPEN: Allow the Secure Partition to access FP/SIMD registers.
+ * Note that SPM will not do any saving/restoring of these registers on
+ * behalf of the SP. This falls under the SP's responsibility.
+ * TTA: Enable access to trace registers.
+ * ZEN (v8.2): Trap SVE instructions and access to SVE registers.
+ */
+ write_ctx_reg(get_sysregs_ctx(ctx), CTX_CPACR_EL1,
+ CPACR_EL1_FPEN(CPACR_EL1_FP_TRAP_NONE));
+
+ /*
+ * Prepare information in buffer shared between EL3 and S-EL0
+ * ----------------------------------------------------------
+ */
+
+ void *shared_buf_ptr = (void *) PLAT_SPM_BUF_BASE;
+
+ /* Copy the boot information into the shared buffer with the SP. */
+ assert((uintptr_t)shared_buf_ptr + sizeof(secure_partition_boot_info_t)
+ <= (PLAT_SPM_BUF_BASE + PLAT_SPM_BUF_SIZE));
+
+ assert(PLAT_SPM_BUF_BASE <= (UINTPTR_MAX - PLAT_SPM_BUF_SIZE + 1));
+
+ const secure_partition_boot_info_t *sp_boot_info =
+ plat_get_secure_partition_boot_info(NULL);
+
+ assert(sp_boot_info != NULL);
+
+ memcpy((void *) shared_buf_ptr, (const void *) sp_boot_info,
+ sizeof(secure_partition_boot_info_t));
+
+ /* Pointer to the MP information from the platform port. */
+ secure_partition_mp_info_t *sp_mp_info =
+ ((secure_partition_boot_info_t *) shared_buf_ptr)->mp_info;
+
+ assert(sp_mp_info != NULL);
+
+ /*
+ * Point the shared buffer MP information pointer to where the info will
+ * be populated, just after the boot info.
+ */
+ ((secure_partition_boot_info_t *) shared_buf_ptr)->mp_info =
+ (secure_partition_mp_info_t *) ((uintptr_t)shared_buf_ptr
+ + sizeof(secure_partition_boot_info_t));
+
+ /*
+ * Update the shared buffer pointer to where the MP information for the
+ * payload will be populated
+ */
+ shared_buf_ptr = ((secure_partition_boot_info_t *) shared_buf_ptr)->mp_info;
+
+ /*
+ * Copy the cpu information into the shared buffer area after the boot
+ * information.
+ */
+ assert(sp_boot_info->num_cpus <= PLATFORM_CORE_COUNT);
+
+ assert((uintptr_t)shared_buf_ptr
+ <= (PLAT_SPM_BUF_BASE + PLAT_SPM_BUF_SIZE -
+ (sp_boot_info->num_cpus * sizeof(*sp_mp_info))));
+
+ memcpy(shared_buf_ptr, (const void *) sp_mp_info,
+ sp_boot_info->num_cpus * sizeof(*sp_mp_info));
+
+ /*
+ * Calculate the linear indices of cores in boot information for the
+ * secure partition and flag the primary CPU
+ */
+ sp_mp_info = (secure_partition_mp_info_t *) shared_buf_ptr;
+
+ for (unsigned int index = 0; index < sp_boot_info->num_cpus; index++) {
+ u_register_t mpidr = sp_mp_info[index].mpidr;
+
+ sp_mp_info[index].linear_id = plat_core_pos_by_mpidr(mpidr);
+ if (plat_my_core_pos() == sp_mp_info[index].linear_id)
+ sp_mp_info[index].flags |= MP_INFO_FLAG_PRIMARY_CPU;
+ }
+}