diff --git a/include/common/bl_common.h b/include/common/bl_common.h
index 457dc2a..eb96df0 100644
--- a/include/common/bl_common.h
+++ b/include/common/bl_common.h
@@ -11,6 +11,14 @@
 #include <common/param_header.h>
 #include <lib/utils_def.h>
 
+#ifndef __ASSEMBLY__
+#include <stddef.h>
+#include <stdint.h>
+#include <lib/cassert.h>
+#endif /* __ASSEMBLY__ */
+
+#include <export/common/bl_common_exp.h>
+
 #define UP	U(1)
 #define DOWN	U(0)
 
@@ -21,22 +29,6 @@
 #define TOP	U(0x1)
 #define BOTTOM	U(0x0)
 
-/*
- * The following are used for image state attributes.
- * Image can only be in one of the following state.
- */
-#define IMAGE_STATE_RESET		U(0)
-#define IMAGE_STATE_COPIED		U(1)
-#define IMAGE_STATE_COPYING		U(2)
-#define IMAGE_STATE_AUTHENTICATED	U(3)
-#define IMAGE_STATE_EXECUTED		U(4)
-#define IMAGE_STATE_INTERRUPTED		U(5)
-
-#define IMAGE_ATTRIB_SKIP_LOADING	U(0x02)
-#define IMAGE_ATTRIB_PLAT_SETUP		U(0x04)
-
-#define INVALID_IMAGE_ID		U(0xFFFFFFFF)
-
 /*******************************************************************************
  * Constants to indicate type of exception to the common exception handler.
  ******************************************************************************/
@@ -101,11 +93,6 @@
 
 #ifndef __ASSEMBLY__
 
-#include <stddef.h>
-#include <stdint.h>
-
-#include <lib/cassert.h>
-
 /*
  * Declarations of linker defined symbols to help determine memory layout of
  * BL images
@@ -165,66 +152,6 @@
 	size_t total_size;
 } meminfo_t;
 
-/*****************************************************************************
- * Image info binary provides information from the image loader that
- * can be used by the firmware to manage available trusted RAM.
- * More advanced firmware image formats can provide additional
- * information that enables optimization or greater flexibility in the
- * common firmware code
- *****************************************************************************/
-typedef struct image_info {
-	param_header_t h;
-	uintptr_t image_base;   /* physical address of base of image */
-	uint32_t image_size;    /* bytes read from image file */
-	uint32_t image_max_size;
-} image_info_t;
-
-/*****************************************************************************
- * The image descriptor struct definition.
- *****************************************************************************/
-typedef struct image_desc {
-	/* Contains unique image id for the image. */
-	unsigned int image_id;
-	/*
-	 * This member contains Image state information.
-	 * Refer IMAGE_STATE_XXX defined above.
-	 */
-	unsigned int state;
-	uint32_t copied_size;	/* image size copied in blocks */
-	image_info_t image_info;
-	entry_point_info_t ep_info;
-} image_desc_t;
-
-/* BL image node in the BL image loading sequence */
-typedef struct bl_load_info_node {
-	unsigned int image_id;
-	image_info_t *image_info;
-	struct bl_load_info_node *next_load_info;
-} bl_load_info_node_t;
-
-/* BL image head node in the BL image loading sequence */
-typedef struct bl_load_info {
-	param_header_t h;
-	bl_load_info_node_t *head;
-} bl_load_info_t;
-
-/* BL image node in the BL image execution sequence */
-typedef struct bl_params_node {
-	unsigned int image_id;
-	image_info_t *image_info;
-	entry_point_info_t *ep_info;
-	struct bl_params_node *next_params_info;
-} bl_params_node_t;
-
-/*
- * BL image head node in the BL image execution sequence
- * It is also used to pass information to next BL image.
- */
-typedef struct bl_params {
-	param_header_t h;
-	bl_params_node_t *head;
-} bl_params_t;
-
 /*******************************************************************************
  * Function & variable prototypes
  ******************************************************************************/
diff --git a/include/common/ep_info.h b/include/common/ep_info.h
index 97df52b..6cb903e 100644
--- a/include/common/ep_info.h
+++ b/include/common/ep_info.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -8,105 +8,30 @@
 #define EP_INFO_H
 
 #include <common/param_header.h>
-#include <lib/utils_def.h>
 
-#define SECURE		U(0x0)
-#define NON_SECURE	U(0x1)
+#ifndef __ASSEMBLY__
+#include <stdint.h>
+#include <lib/cassert.h>
+#endif /* __ASSEMBLY__ */
+
+#include <export/common/ep_info_exp.h>
+
+#define SECURE		EP_SECURE
+#define NON_SECURE	EP_NON_SECURE
 #define sec_state_is_valid(s) (((s) == SECURE) || ((s) == NON_SECURE))
 
-/*******************************************************************************
- * Constants that allow assembler code to access members of and the
- * 'entry_point_info' structure at their correct offsets.
- ******************************************************************************/
-#define ENTRY_POINT_INFO_PC_OFFSET	U(0x08)
-#ifdef AARCH32
-#define ENTRY_POINT_INFO_LR_SVC_OFFSET	U(0x10)
-#define ENTRY_POINT_INFO_ARGS_OFFSET	U(0x14)
-#else
-#define ENTRY_POINT_INFO_ARGS_OFFSET	U(0x18)
-#endif
+#define PARAM_EP_SECURITY_MASK	EP_SECURITY_MASK
 
-/* The following are used to set/get image attributes. */
-#define PARAM_EP_SECURITY_MASK		U(0x1)
+#define NON_EXECUTABLE	EP_NON_EXECUTABLE
+#define EXECUTABLE	EP_EXECUTABLE
 
 /* Secure or Non-secure image */
-#define GET_SECURITY_STATE(x) ((x) & PARAM_EP_SECURITY_MASK)
+#define GET_SECURITY_STATE(x) ((x) & EP_SECURITY_MASK)
 #define SET_SECURITY_STATE(x, security) \
-			((x) = ((x) & ~PARAM_EP_SECURITY_MASK) | (security))
-
-/* Endianness of the image. */
-#define EP_EE_MASK		U(0x2)
-#define EP_EE_SHIFT		U(1)
-#define EP_EE_LITTLE		U(0x0)
-#define EP_EE_BIG		U(0x2)
-#define EP_GET_EE(x)		((x) & EP_EE_MASK)
-#define EP_SET_EE(x, ee)	((x) = ((x) & ~EP_EE_MASK) | (ee))
-
-/* Enable or disable access to the secure timer from secure images. */
-#define EP_ST_MASK		U(0x4)
-#define EP_ST_DISABLE		U(0x0)
-#define EP_ST_ENABLE		U(0x4)
-#define EP_GET_ST(x)		((x) & EP_ST_MASK)
-#define EP_SET_ST(x, ee)	((x) = ((x) & ~EP_ST_MASK) | (ee))
-
-/* Determine if an image is executable or not. */
-#define EP_EXE_MASK		U(0x8)
-#define NON_EXECUTABLE		U(0x0)
-#define EXECUTABLE		U(0x8)
-#define EP_GET_EXE(x)		((x) & EP_EXE_MASK)
-#define EP_SET_EXE(x, ee)	((x) = ((x) & ~EP_EXE_MASK) | (ee))
-
-/* Flag to indicate the first image that is executed. */
-#define EP_FIRST_EXE_MASK	U(0x10)
-#define EP_FIRST_EXE		U(0x10)
-#define EP_GET_FIRST_EXE(x)	((x) & EP_FIRST_EXE_MASK)
-#define EP_SET_FIRST_EXE(x, ee)	((x) = ((x) & ~EP_FIRST_EXE_MASK) | (ee))
+			((x) = ((x) & ~EP_SECURITY_MASK) | (security))
 
 #ifndef __ASSEMBLY__
 
-#include <stdint.h>
-
-#include <lib/cassert.h>
-
-typedef struct aapcs64_params {
-	uint64_t arg0;
-	uint64_t arg1;
-	uint64_t arg2;
-	uint64_t arg3;
-	uint64_t arg4;
-	uint64_t arg5;
-	uint64_t arg6;
-	uint64_t arg7;
-} aapcs64_params_t;
-
-typedef struct aapcs32_params {
-	uint32_t arg0;
-	uint32_t arg1;
-	uint32_t arg2;
-	uint32_t arg3;
-} aapcs32_params_t;
-
-/*****************************************************************************
- * This structure represents the superset of information needed while
- * switching exception levels. The only two mechanisms to do so are
- * ERET & SMC. Security state is indicated using bit zero of header
- * attribute
- * NOTE: BL1 expects entrypoint followed by spsr at an offset from the start
- * of this structure defined by the macro `ENTRY_POINT_INFO_PC_OFFSET` while
- * processing SMC to jump to BL31.
- *****************************************************************************/
-typedef struct entry_point_info {
-	param_header_t h;
-	uintptr_t pc;
-	uint32_t spsr;
-#ifdef AARCH32
-	uintptr_t lr_svc;
-	aapcs32_params_t args;
-#else
-	aapcs64_params_t args;
-#endif
-} entry_point_info_t;
-
 /*
  * Compile time assertions related to the 'entry_point_info' structure to
  * ensure that the assembler and the compiler view of the offsets of
diff --git a/include/common/param_header.h b/include/common/param_header.h
index 0c1503f..b885286 100644
--- a/include/common/param_header.h
+++ b/include/common/param_header.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -9,20 +9,14 @@
 
 #include <stdbool.h>
 
-#include <lib/utils_def.h>
+#ifndef __ASSEMBLY__
+#include <stdint.h>
+#endif /*__ASSEMBLY__*/
 
-/* Param header types */
-#define PARAM_EP			U(0x01)
-#define PARAM_IMAGE_BINARY		U(0x02)
-#define PARAM_BL31			U(0x03)
-#define PARAM_BL_LOAD_INFO		U(0x04)
-#define PARAM_BL_PARAMS			U(0x05)
-#define PARAM_PSCI_LIB_ARGS		U(0x06)
-#define PARAM_SP_IMAGE_BOOT_INFO	U(0x07)
+#include <export/common/param_header_exp.h>
 
-/* Param header version */
-#define VERSION_1	U(0x01)
-#define VERSION_2	U(0x02)
+#define VERSION_1	PARAM_VERSION_1
+#define VERSION_2	PARAM_VERSION_2
 
 #define SET_PARAM_HEAD(_p, _type, _ver, _attr) do { \
 	(_p)->h.type = (uint8_t)(_type); \
@@ -38,21 +32,4 @@
 	._p.h.size = (uint16_t)sizeof(_p_type), \
 	._p.h.attr = (uint32_t)(_attr)
 
-#ifndef __ASSEMBLY__
-
-#include <stdint.h>
-
-/***************************************************************************
- * This structure provides version information and the size of the
- * structure, attributes for the structure it represents
- ***************************************************************************/
-typedef struct param_header {
-	uint8_t type;		/* type of the structure */
-	uint8_t version;    /* version of this structure */
-	uint16_t size;      /* size of this structure in bytes */
-	uint32_t attr;      /* attributes: unused bits SBZ */
-} param_header_t;
-
-#endif /*__ASSEMBLY__*/
-
 #endif /* PARAM_HEADER_H */
diff --git a/include/common/tbbr/tbbr_img_def.h b/include/common/tbbr/tbbr_img_def.h
index 672886d..1701995 100644
--- a/include/common/tbbr/tbbr_img_def.h
+++ b/include/common/tbbr/tbbr_img_def.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -7,83 +7,6 @@
 #ifndef TBBR_IMG_DEF_H
 #define TBBR_IMG_DEF_H
 
-#include <lib/utils_def.h>
-
-/* Firmware Image Package */
-#define FIP_IMAGE_ID			U(0)
-
-/* Trusted Boot Firmware BL2 */
-#define BL2_IMAGE_ID			U(1)
-
-/* SCP Firmware SCP_BL2 */
-#define SCP_BL2_IMAGE_ID		U(2)
-
-/* EL3 Runtime Firmware BL31 */
-#define BL31_IMAGE_ID			U(3)
-
-/* Secure Payload BL32 (Trusted OS) */
-#define BL32_IMAGE_ID			U(4)
-
-/* Non-Trusted Firmware BL33 */
-#define BL33_IMAGE_ID			U(5)
-
-/* Certificates */
-#define TRUSTED_BOOT_FW_CERT_ID		U(6)
-#define TRUSTED_KEY_CERT_ID		U(7)
-
-#define SCP_FW_KEY_CERT_ID		U(8)
-#define SOC_FW_KEY_CERT_ID		U(9)
-#define TRUSTED_OS_FW_KEY_CERT_ID	U(10)
-#define NON_TRUSTED_FW_KEY_CERT_ID	U(11)
-
-#define SCP_FW_CONTENT_CERT_ID		U(12)
-#define SOC_FW_CONTENT_CERT_ID		U(13)
-#define TRUSTED_OS_FW_CONTENT_CERT_ID	U(14)
-#define NON_TRUSTED_FW_CONTENT_CERT_ID	U(15)
-
-/* Non-Trusted ROM Firmware NS_BL1U */
-#define NS_BL1U_IMAGE_ID		U(16)
-
-/* Trusted FWU Certificate */
-#define FWU_CERT_ID			U(17)
-
-/* Trusted FWU SCP Firmware SCP_BL2U */
-#define SCP_BL2U_IMAGE_ID		U(18)
-
-/* Trusted FWU Boot Firmware BL2U */
-#define BL2U_IMAGE_ID			U(19)
-
-/* Non-Trusted FWU Firmware NS_BL2U */
-#define NS_BL2U_IMAGE_ID		U(20)
-
-/* Secure Payload BL32_EXTRA1 (Trusted OS Extra1) */
-#define BL32_EXTRA1_IMAGE_ID		U(21)
-
-/* Secure Payload BL32_EXTRA2 (Trusted OS Extra2) */
-#define BL32_EXTRA2_IMAGE_ID		U(22)
-
-/* HW_CONFIG (e.g. Kernel DT) */
-#define HW_CONFIG_ID			U(23)
-
-/* TB_FW_CONFIG */
-#define TB_FW_CONFIG_ID			U(24)
-
-/* SOC_FW_CONFIG */
-#define SOC_FW_CONFIG_ID		U(25)
-
-/* TOS_FW_CONFIG */
-#define TOS_FW_CONFIG_ID		U(26)
-
-/* NT_FW_CONFIG */
-#define NT_FW_CONFIG_ID			U(27)
-
-/* GPT Partition */
-#define GPT_IMAGE_ID			U(28)
-
-/* Binary with STM32 header */
-#define STM32_IMAGE_ID			U(29)
-
-/* Define size of the array */
-#define MAX_NUMBER_IDS			U(30)
+#include <export/common/tbbr/tbbr_img_def_exp.h>
 
 #endif /* TBBR_IMG_DEF_H */