diff --git a/plat/mediatek/mt8192/include/mt_gic_v3.h b/plat/mediatek/mt8192/include/mt_gic_v3.h
index 34ba8a7..c4ab44f 100644
--- a/plat/mediatek/mt8192/include/mt_gic_v3.h
+++ b/plat/mediatek/mt8192/include/mt_gic_v3.h
@@ -21,4 +21,7 @@
 void mt_gic_rdistif_restore_all(void);
 void gic_sgi_save_all(void);
 void gic_sgi_restore_all(void);
+uint32_t mt_irq_get_pending(uint32_t irq);
+void mt_irq_set_pending(uint32_t irq);
+
 #endif /* MT_GIC_V3_H */
diff --git a/plat/mediatek/mt8192/include/plat_mt_cirq.h b/plat/mediatek/mt8192/include/plat_mt_cirq.h
new file mode 100644
index 0000000..5818601
--- /dev/null
+++ b/plat/mediatek/mt8192/include/plat_mt_cirq.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_MT_CIRQ_H
+#define PLAT_MT_CIRQ_H
+
+#define SYS_CIRQ_BASE        U(0x10204000)
+#define CIRQ_IRQ_NUM         U(439)
+#define CIRQ_SPI_START       U(96)
+/*
+ * Define hardware register
+ */
+#define  CIRQ_STA_BASE         U(0x000)
+#define  CIRQ_ACK_BASE         U(0x080)
+#define  CIRQ_MASK_BASE        U(0x100)
+#define  CIRQ_MASK_SET_BASE    U(0x180)
+#define  CIRQ_MASK_CLR_BASE    U(0x200)
+#define  CIRQ_SENS_BASE        U(0x280)
+#define  CIRQ_SENS_SET_BASE    U(0x300)
+#define  CIRQ_SENS_CLR_BASE    U(0x380)
+#define  CIRQ_POL_BASE         U(0x400)
+#define  CIRQ_POL_SET_BASE     U(0x480)
+#define  CIRQ_POL_CLR_BASE     U(0x500)
+#define  CIRQ_CON              U(0x600)
+
+/*
+ * Register placement
+ */
+#define  CIRQ_CON_EN_BITS           U(0)
+#define  CIRQ_CON_EDGE_ONLY_BITS    U(1)
+#define  CIRQ_CON_FLUSH_BITS        U(2)
+#define  CIRQ_CON_EVENT_BITS        U(31)
+#define  CIRQ_CON_SW_RST_BITS       U(20)
+#define  CIRQ_CON_BITS_MASK         U(0x7)
+
+/*
+ * Register setting
+ */
+#define  CIRQ_CON_EN            U(0x1)
+#define  CIRQ_CON_EDGE_ONLY     U(0x1)
+#define  CIRQ_SW_RESET          U(0x1)
+#define  CIRQ_CON_FLUSH         U(0x1)
+
+/*
+ * Define constant
+ */
+#define  CIRQ_CTRL_REG_NUM      ((CIRQ_IRQ_NUM + 31U) / 32U)
+#define  MT_CIRQ_POL_NEG               U(0)
+#define  MT_CIRQ_POL_POS               U(1)
+#define  MT_CIRQ_EDGE_SENSITIVE        U(0)
+#define  MT_CIRQ_LEVEL_SENSITIVE       U(1)
+
+/*
+ * Define macro
+ */
+#define  IRQ_TO_CIRQ_NUM(irq)       ((irq) - (CIRQ_SPI_START))
+#define  CIRQ_TO_IRQ_NUM(cirq)      ((cirq) + (CIRQ_SPI_START))
+
+/*
+ * Define cirq events
+ */
+struct cirq_events {
+	uint32_t spi_start;
+	uint32_t num_of_events;
+	uint32_t *wakeup_events;
+};
+
+/*
+ * Define function prototypes.
+ */
+void mt_cirq_enable(void);
+void mt_cirq_disable(void);
+void mt_cirq_clone_gic(void);
+void mt_cirq_flush(void);
+void mt_cirq_sw_reset(void);
+void set_wakeup_sources(uint32_t *list, uint32_t num_of_events);
+void mt_cirq_dump_reg(void);
+
+#endif  /* PLAT_MT_CIRQ_H */
diff --git a/plat/mediatek/mt8192/plat_mt_cirq.c b/plat/mediatek/mt8192/plat_mt_cirq.c
new file mode 100644
index 0000000..7fc0607
--- /dev/null
+++ b/plat/mediatek/mt8192/plat_mt_cirq.c
@@ -0,0 +1,494 @@
+/*
+ * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/arm/gic_common.h>
+#include <drivers/console.h>
+#include <lib/mmio.h>
+
+#include <mt_gic_v3.h>
+#include <mtk_plat_common.h>
+#include <plat_mt_cirq.h>
+#include <platform_def.h>
+
+static struct cirq_events cirq_all_events = {
+	.spi_start = CIRQ_SPI_START
+};
+
+static inline void  mt_cirq_write32(uint32_t val, uint32_t addr)
+{
+	mmio_write_32(addr + SYS_CIRQ_BASE, val);
+}
+
+static inline uint32_t mt_cirq_read32(uint32_t addr)
+{
+	return mmio_read_32(addr + SYS_CIRQ_BASE);
+}
+
+/*
+ * cirq_clone_flush_check_store:
+ * set 1 if we need to enable clone/flush value's check
+ */
+static int32_t cirq_clone_flush_check_val;
+
+/*
+ * cirq_pattern_clone_flush_check_show:  set 1 if we need to do pattern test.
+ */
+static int32_t cirq_pattern_clone_flush_check_val;
+
+/*
+ * cirq_pattern_clone_flush_check_show:  set 1 if we need to do pattern test.
+ */
+static int32_t cirq_pattern_list;
+
+/*
+ * mt_cirq_ack_all: Ack all the interrupt on SYS_CIRQ
+ */
+void mt_cirq_ack_all(void)
+{
+	unsigned int i;
+
+	for (i = 0U; i < CIRQ_CTRL_REG_NUM; i++) {
+		mt_cirq_write32(0xFFFFFFFF, CIRQ_ACK_BASE + (i * 4U));
+	}
+	/* make sure all cirq setting take effect before doing other things */
+	dmbsy();
+}
+
+/*
+ * mt_cirq_enable: Enable SYS_CIRQ
+ */
+void mt_cirq_enable(void)
+{
+	uint32_t st;
+
+	mt_cirq_ack_all();
+
+	st = mt_cirq_read32(CIRQ_CON);
+	st |= (CIRQ_CON_EN << CIRQ_CON_EN_BITS) |
+			(CIRQ_CON_EDGE_ONLY << CIRQ_CON_EDGE_ONLY_BITS);
+
+	mt_cirq_write32((st & CIRQ_CON_BITS_MASK), CIRQ_CON);
+}
+
+/*
+ * mt_cirq_disable: Disable SYS_CIRQ
+ */
+void mt_cirq_disable(void)
+{
+	uint32_t st;
+
+	st = mt_cirq_read32(CIRQ_CON);
+	st &= ~(CIRQ_CON_EN << CIRQ_CON_EN_BITS);
+
+	mt_cirq_write32((st & CIRQ_CON_BITS_MASK), CIRQ_CON);
+}
+
+/*
+ * mt_cirq_get_mask: Get the specified SYS_CIRQ mask
+ * @cirq_num: the SYS_CIRQ number to get
+ * @return:
+ *    1: this cirq is masked
+ *    0: this cirq is umasked
+ *    2: cirq num is out of range
+ */
+__attribute__((weak)) unsigned int mt_cirq_get_mask(uint32_t cirq_num)
+{
+	uint32_t st;
+	unsigned int val;
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return 2;
+	}
+
+	st = mt_cirq_read32((cirq_num / 32U) * 4U + CIRQ_MASK_BASE);
+	val = (st >> (cirq_num % 32U)) & 1U;
+	return val;
+}
+
+/*
+ * mt_cirq_mask_all: Mask all interrupts on SYS_CIRQ.
+ */
+void mt_cirq_mask_all(void)
+{
+	unsigned int i;
+
+	for (i = 0U; i < CIRQ_CTRL_REG_NUM; i++) {
+		mt_cirq_write32(0xFFFFFFFF, CIRQ_MASK_SET_BASE + (i * 4U));
+	}
+	/* make sure all cirq setting take effect before doing other things */
+	dmbsy();
+}
+
+/*
+ * mt_cirq_unmask_all: Unmask all interrupts on SYS_CIRQ.
+ */
+void mt_cirq_unmask_all(void)
+{
+	unsigned int i;
+
+	for (i = 0U; i < CIRQ_CTRL_REG_NUM; i++) {
+		mt_cirq_write32(0xFFFFFFFF, CIRQ_MASK_CLR_BASE + (i * 4U));
+	}
+	/* make sure all cirq setting take effect before doing other things */
+	dmbsy();
+}
+
+/*
+ * mt_cirq_mask: Mask the specified SYS_CIRQ.
+ * @cirq_num: the SYS_CIRQ number to mask
+ * @return:
+ *    0: mask success
+ *   -1: cirq num is out of range
+ */
+static int mt_cirq_mask(uint32_t cirq_num)
+{
+	uint32_t bit = 1U << (cirq_num % 32U);
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return -1;
+	}
+
+	mt_cirq_write32(bit, (cirq_num / 32U) * 4U + CIRQ_MASK_SET_BASE);
+	return 0;
+}
+
+/*
+ * mt_cirq_unmask: Unmask the specified SYS_CIRQ.
+ * @cirq_num: the SYS_CIRQ number to unmask
+ * @return:
+ *    0: umask success
+ *   -1: cirq num is out of range
+ */
+static int mt_cirq_unmask(uint32_t cirq_num)
+{
+	uint32_t bit = 1U << (cirq_num % 32U);
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return -1;
+	}
+
+	mt_cirq_write32(bit, (cirq_num / 32U) * 4U + CIRQ_MASK_CLR_BASE);
+	return 0;
+}
+
+/*
+ * mt_cirq_set_sens: Set the sensitivity for the specified SYS_CIRQ number.
+ * @cirq_num: the SYS_CIRQ number to set
+ * @sens: sensitivity to set
+ * @return:
+ *    0: set sens success
+ *   -1: cirq num is out of range
+ */
+static int mt_cirq_set_sens(uint32_t cirq_num, uint32_t sens)
+{
+	uint32_t base;
+	uint32_t bit = 1U << (cirq_num % 32U);
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return -1;
+	}
+
+	if (sens == MT_CIRQ_EDGE_SENSITIVE) {
+		base = (cirq_num / 32U) * 4U + CIRQ_SENS_CLR_BASE;
+	} else if (sens == MT_CIRQ_LEVEL_SENSITIVE) {
+		base = (cirq_num / 32U) * 4U + CIRQ_SENS_SET_BASE;
+	} else {
+		ERROR("[CIRQ] set_sens invalid sen value %u\n", sens);
+		return -1;
+	}
+
+	mt_cirq_write32(bit, base);
+	return 0;
+}
+
+/*
+ * mt_cirq_get_sens: Get the specified SYS_CIRQ sensitivity
+ * @cirq_num: the SYS_CIRQ number to get
+ * @return:
+ *    1: this cirq is MT_LEVEL_SENSITIVE
+ *    0: this cirq is MT_EDGE_SENSITIVE
+ *    2: cirq num is out of range
+ */
+__attribute__((weak)) unsigned int mt_cirq_get_sens(uint32_t cirq_num)
+{
+	uint32_t st;
+	unsigned int val;
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return 2;
+	}
+
+	st = mt_cirq_read32((cirq_num / 32U) * 4U + CIRQ_SENS_BASE);
+	val = (st >> (cirq_num % 32U)) & 1U;
+	return val;
+}
+
+/*
+ * mt_cirq_set_pol: Set the polarity for the specified SYS_CIRQ number.
+ * @cirq_num: the SYS_CIRQ number to set
+ * @pol: polarity to set
+ * @return:
+ *    0: set pol success
+ *   -1: cirq num is out of range
+ */
+static int mt_cirq_set_pol(uint32_t cirq_num, uint32_t pol)
+{
+	uint32_t base;
+	uint32_t bit = 1U << (cirq_num % 32U);
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return -1;
+	}
+
+	if (pol == MT_CIRQ_POL_NEG) {
+		base = (cirq_num / 32U) * 4U + CIRQ_POL_CLR_BASE;
+	} else if (pol == MT_CIRQ_POL_POS) {
+		base = (cirq_num / 32U) * 4U + CIRQ_POL_SET_BASE;
+	} else {
+		ERROR("[CIRQ] set_pol invalid polarity value %u\n", pol);
+		return -1;
+	}
+
+	mt_cirq_write32(bit, base);
+	return 0;
+}
+
+/*
+ * mt_cirq_get_pol: Get the specified SYS_CIRQ polarity
+ * @cirq_num: the SYS_CIRQ number to get
+ * @return:
+ *    1: this cirq is MT_CIRQ_POL_POS
+ *    0: this cirq is MT_CIRQ_POL_NEG
+ *    2: cirq num is out of range
+ */
+__attribute__((weak)) unsigned int mt_cirq_get_pol(uint32_t cirq_num)
+{
+	uint32_t st;
+	unsigned int val;
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return 2;
+	}
+
+	st = mt_cirq_read32((cirq_num / 32U) * 4U + CIRQ_POL_BASE);
+	val = (st >> (cirq_num % 32U)) & 1U;
+	return val;
+}
+
+/*
+ * mt_cirq_get_pending: Get the specified SYS_CIRQ pending
+ * @cirq_num: the SYS_CIRQ number to get
+ * @return:
+ *    1: this cirq is pending
+ *    0: this cirq is not pending
+ *    2: cirq num is out of range
+ */
+static unsigned int mt_cirq_get_pending(uint32_t cirq_num)
+{
+	uint32_t st;
+	unsigned int val;
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return 2;
+	}
+
+	st = mt_cirq_read32((cirq_num / 32U) * 4U + CIRQ_STA_BASE);
+	val = (st >> (cirq_num % 32U)) & 1U;
+	return val;
+}
+
+/*
+ * mt_cirq_clone_pol: Copy the polarity setting from GIC to SYS_CIRQ
+ */
+void mt_cirq_clone_pol(void)
+{
+	uint32_t cirq_num;
+
+	for (cirq_num = 0U; cirq_num < CIRQ_IRQ_NUM; cirq_num++) {
+		mt_cirq_set_pol(cirq_num, MT_CIRQ_POL_POS);
+	}
+}
+
+/*
+ * mt_cirq_clone_sens: Copy the sensitivity setting from GIC to SYS_CIRQ
+ */
+void mt_cirq_clone_sens(void)
+{
+	uint32_t cirq_num, irq_num;
+	uint32_t st, val;
+
+	for (cirq_num = 0U; cirq_num < CIRQ_IRQ_NUM; cirq_num++) {
+		irq_num = CIRQ_TO_IRQ_NUM(cirq_num);
+
+		if ((cirq_num == 0U) || (irq_num % 16U == 0U)) {
+			st = mmio_read_32(BASE_GICD_BASE + GICD_ICFGR +
+				(irq_num / 16U * 4U));
+		}
+
+		val = (st >> ((irq_num % 16U) * 2U)) & 0x2U;
+
+		if (val) {
+			mt_cirq_set_sens(cirq_num, MT_CIRQ_EDGE_SENSITIVE);
+		} else {
+			mt_cirq_set_sens(cirq_num, MT_CIRQ_LEVEL_SENSITIVE);
+		}
+	}
+}
+
+/*
+ * mt_cirq_clone_mask: Copy the mask setting from GIC to SYS_CIRQ
+ */
+void mt_cirq_clone_mask(void)
+{
+	uint32_t cirq_num, irq_num;
+	uint32_t st, val;
+
+	for (cirq_num = 0U; cirq_num < CIRQ_IRQ_NUM; cirq_num++) {
+		irq_num = CIRQ_TO_IRQ_NUM(cirq_num);
+
+		if ((cirq_num == 0U) || (irq_num % 32U == 0U)) {
+			st = mmio_read_32(BASE_GICD_BASE +
+				GICD_ISENABLER + (irq_num / 32U * 4U));
+		}
+
+		val = (st >> (irq_num % 32)) & 1U;
+
+		if (val) {
+			mt_cirq_unmask(cirq_num);
+		} else {
+			mt_cirq_mask(cirq_num);
+		}
+	}
+}
+
+/*
+ * mt_cirq_clone_gic: Copy the setting from GIC to SYS_CIRQ
+ */
+void mt_cirq_clone_gic(void)
+{
+	mt_cirq_clone_sens();
+	mt_cirq_clone_mask();
+}
+
+/*
+ * mt_cirq_disable: Flush interrupt from SYS_CIRQ to GIC
+ */
+void mt_cirq_flush(void)
+{
+	unsigned int i;
+	unsigned char cirq_p_val = 0U;
+	unsigned char irq_p_val = 0U;
+	uint32_t irq_p = 0U;
+	unsigned char pass = 1U;
+	uint32_t first_cirq_found = 0U;
+	uint32_t first_flushed_cirq;
+	uint32_t first_irq_flushedto;
+	uint32_t last_fluashed_cirq;
+	uint32_t last_irq_flushedto;
+
+	if (cirq_pattern_clone_flush_check_val == 1U) {
+		if (cirq_pattern_list < CIRQ_IRQ_NUM) {
+			mt_cirq_unmask(cirq_pattern_list);
+			mt_cirq_set_sens(cirq_pattern_list,
+				MT_CIRQ_EDGE_SENSITIVE);
+			mt_cirq_set_pol(cirq_pattern_list, MT_CIRQ_POL_NEG);
+			mt_cirq_set_pol(cirq_pattern_list, MT_CIRQ_POL_POS);
+			mt_cirq_set_pol(cirq_pattern_list, MT_CIRQ_POL_NEG);
+		} else {
+			ERROR("[CIRQ] no pattern to test,");
+			ERROR("input pattern first\n");
+		}
+		ERROR("[CIRQ] cirq_pattern %u, cirq_p %u,",
+				cirq_pattern_list,
+				mt_cirq_get_pending(cirq_pattern_list));
+		ERROR("cirq_s %u, cirq_con 0x%x\n",
+				mt_cirq_get_sens(cirq_pattern_list),
+				mt_cirq_read32(CIRQ_CON));
+	}
+
+	mt_cirq_unmask_all();
+
+	for (i = 0U; i < CIRQ_IRQ_NUM; i++) {
+		cirq_p_val = mt_cirq_get_pending(i);
+		if (cirq_p_val) {
+			mt_irq_set_pending(CIRQ_TO_IRQ_NUM(i));
+		}
+
+		if (cirq_clone_flush_check_val == 1U) {
+			if (cirq_p_val == 0U) {
+				continue;
+		}
+			irq_p = CIRQ_TO_IRQ_NUM(i);
+			irq_p_val = mt_irq_get_pending(irq_p);
+			if (cirq_p_val != irq_p_val) {
+				ERROR("[CIRQ] CIRQ Flush Failed ");
+				ERROR("%u(cirq %d)!= %u(gic %d)\n",
+					cirq_p_val, i, irq_p_val,
+					CIRQ_TO_IRQ_NUM(i));
+				pass = 0;
+			} else {
+				ERROR("[CIRQ] CIRQ Flush Pass ");
+				ERROR("%u(cirq %d) = %u(gic %d)\n",
+					cirq_p_val, i, irq_p_val,
+					CIRQ_TO_IRQ_NUM(i));
+			}
+			if (!first_cirq_found) {
+				first_flushed_cirq = i;
+				first_irq_flushedto = irq_p;
+				first_cirq_found = 1U;
+			}
+			last_fluashed_cirq = i;
+			last_irq_flushedto = irq_p;
+		}
+	}
+
+	if (cirq_clone_flush_check_val == 1U) {
+		if (first_cirq_found) {
+			ERROR("[CIRQ] The first flush : CIRQ%u to IRQ%u\n",
+				first_flushed_cirq, first_irq_flushedto);
+			ERROR("[CIRQ] The last flush : CIRQ%u to IRQ%u\n",
+				last_fluashed_cirq, last_irq_flushedto);
+		} else {
+			ERROR("[CIRQ] There are no pending ");
+			ERROR("interrupt in CIRQ\n");
+			ERROR("[CIRQ] so no flush operation happened\n");
+		}
+		ERROR("[CIRQ] The Flush Max Range : CIRQ");
+		ERROR("%d to IRQ%d ~ CIRQ%d to IRQ%d\n", 0U,
+			CIRQ_TO_IRQ_NUM(0U), CIRQ_IRQ_NUM - 1U,
+			CIRQ_TO_IRQ_NUM(CIRQ_IRQ_NUM - 1U));
+		ERROR("[CIRQ] Flush Check %s, Confirm:SPI_START_OFFSET:%d\n",
+			pass == 1 ? "Pass" : "Failed", CIRQ_SPI_START);
+	}
+	mt_cirq_mask_all();
+	mt_cirq_ack_all();
+}
+
+void mt_cirq_sw_reset(void)
+{
+	uint32_t st;
+
+	st = mt_cirq_read32(CIRQ_CON);
+	st |= (CIRQ_SW_RESET << CIRQ_CON_SW_RST_BITS);
+
+	mt_cirq_write32(st, CIRQ_CON);
+}
+
+void set_wakeup_sources(uint32_t *list, uint32_t num_of_events)
+{
+	cirq_all_events.num_of_events = num_of_events;
+	cirq_all_events.wakeup_events = list;
+}
diff --git a/plat/mediatek/mt8192/plat_mt_gic.c b/plat/mediatek/mt8192/plat_mt_gic.c
index 593f5d0..ae8d697 100644
--- a/plat/mediatek/mt8192/plat_mt_gic.c
+++ b/plat/mediatek/mt8192/plat_mt_gic.c
@@ -175,3 +175,22 @@
 	gicv3_rdistif_init(plat_my_core_pos());
 	gicv3_cpuif_enable(plat_my_core_pos());
 }
+
+uint32_t mt_irq_get_pending(uint32_t irq)
+{
+	uint32_t val;
+
+	val = mmio_read_32(BASE_GICD_BASE + GICD_ISPENDR +
+		irq / 32 * 4);
+	val = (val >> (irq % 32)) & 1U;
+	return val;
+}
+
+
+void mt_irq_set_pending(uint32_t irq)
+{
+	uint32_t bit = 1U << (irq % 32);
+
+	mmio_write_32(BASE_GICD_BASE + GICD_ISPENDR +
+		irq / 32 * 4, bit);
+}
diff --git a/plat/mediatek/mt8192/platform.mk b/plat/mediatek/mt8192/platform.mk
index 0d732d5..071700e 100644
--- a/plat/mediatek/mt8192/platform.mk
+++ b/plat/mediatek/mt8192/platform.mk
@@ -36,6 +36,7 @@
                    ${MTK_PLAT_SOC}/plat_pm.c                             \
                    ${MTK_PLAT_SOC}/plat_topology.c                       \
                    ${MTK_PLAT_SOC}/plat_mt_gic.c                         \
+                   ${MTK_PLAT_SOC}/plat_mt_cirq.c                        \
                    ${MTK_PLAT_SOC}/drivers/gpio/mtgpio.c