diff --git a/plat/mediatek/mt8192/plat_mt_cirq.c b/plat/mediatek/mt8192/plat_mt_cirq.c
new file mode 100644
index 0000000..7fc0607
--- /dev/null
+++ b/plat/mediatek/mt8192/plat_mt_cirq.c
@@ -0,0 +1,494 @@
+/*
+ * Copyright (c) 2020, MediaTek Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/arm/gic_common.h>
+#include <drivers/console.h>
+#include <lib/mmio.h>
+
+#include <mt_gic_v3.h>
+#include <mtk_plat_common.h>
+#include <plat_mt_cirq.h>
+#include <platform_def.h>
+
+static struct cirq_events cirq_all_events = {
+	.spi_start = CIRQ_SPI_START
+};
+
+static inline void  mt_cirq_write32(uint32_t val, uint32_t addr)
+{
+	mmio_write_32(addr + SYS_CIRQ_BASE, val);
+}
+
+static inline uint32_t mt_cirq_read32(uint32_t addr)
+{
+	return mmio_read_32(addr + SYS_CIRQ_BASE);
+}
+
+/*
+ * cirq_clone_flush_check_store:
+ * set 1 if we need to enable clone/flush value's check
+ */
+static int32_t cirq_clone_flush_check_val;
+
+/*
+ * cirq_pattern_clone_flush_check_show:  set 1 if we need to do pattern test.
+ */
+static int32_t cirq_pattern_clone_flush_check_val;
+
+/*
+ * cirq_pattern_clone_flush_check_show:  set 1 if we need to do pattern test.
+ */
+static int32_t cirq_pattern_list;
+
+/*
+ * mt_cirq_ack_all: Ack all the interrupt on SYS_CIRQ
+ */
+void mt_cirq_ack_all(void)
+{
+	unsigned int i;
+
+	for (i = 0U; i < CIRQ_CTRL_REG_NUM; i++) {
+		mt_cirq_write32(0xFFFFFFFF, CIRQ_ACK_BASE + (i * 4U));
+	}
+	/* make sure all cirq setting take effect before doing other things */
+	dmbsy();
+}
+
+/*
+ * mt_cirq_enable: Enable SYS_CIRQ
+ */
+void mt_cirq_enable(void)
+{
+	uint32_t st;
+
+	mt_cirq_ack_all();
+
+	st = mt_cirq_read32(CIRQ_CON);
+	st |= (CIRQ_CON_EN << CIRQ_CON_EN_BITS) |
+			(CIRQ_CON_EDGE_ONLY << CIRQ_CON_EDGE_ONLY_BITS);
+
+	mt_cirq_write32((st & CIRQ_CON_BITS_MASK), CIRQ_CON);
+}
+
+/*
+ * mt_cirq_disable: Disable SYS_CIRQ
+ */
+void mt_cirq_disable(void)
+{
+	uint32_t st;
+
+	st = mt_cirq_read32(CIRQ_CON);
+	st &= ~(CIRQ_CON_EN << CIRQ_CON_EN_BITS);
+
+	mt_cirq_write32((st & CIRQ_CON_BITS_MASK), CIRQ_CON);
+}
+
+/*
+ * mt_cirq_get_mask: Get the specified SYS_CIRQ mask
+ * @cirq_num: the SYS_CIRQ number to get
+ * @return:
+ *    1: this cirq is masked
+ *    0: this cirq is umasked
+ *    2: cirq num is out of range
+ */
+__attribute__((weak)) unsigned int mt_cirq_get_mask(uint32_t cirq_num)
+{
+	uint32_t st;
+	unsigned int val;
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return 2;
+	}
+
+	st = mt_cirq_read32((cirq_num / 32U) * 4U + CIRQ_MASK_BASE);
+	val = (st >> (cirq_num % 32U)) & 1U;
+	return val;
+}
+
+/*
+ * mt_cirq_mask_all: Mask all interrupts on SYS_CIRQ.
+ */
+void mt_cirq_mask_all(void)
+{
+	unsigned int i;
+
+	for (i = 0U; i < CIRQ_CTRL_REG_NUM; i++) {
+		mt_cirq_write32(0xFFFFFFFF, CIRQ_MASK_SET_BASE + (i * 4U));
+	}
+	/* make sure all cirq setting take effect before doing other things */
+	dmbsy();
+}
+
+/*
+ * mt_cirq_unmask_all: Unmask all interrupts on SYS_CIRQ.
+ */
+void mt_cirq_unmask_all(void)
+{
+	unsigned int i;
+
+	for (i = 0U; i < CIRQ_CTRL_REG_NUM; i++) {
+		mt_cirq_write32(0xFFFFFFFF, CIRQ_MASK_CLR_BASE + (i * 4U));
+	}
+	/* make sure all cirq setting take effect before doing other things */
+	dmbsy();
+}
+
+/*
+ * mt_cirq_mask: Mask the specified SYS_CIRQ.
+ * @cirq_num: the SYS_CIRQ number to mask
+ * @return:
+ *    0: mask success
+ *   -1: cirq num is out of range
+ */
+static int mt_cirq_mask(uint32_t cirq_num)
+{
+	uint32_t bit = 1U << (cirq_num % 32U);
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return -1;
+	}
+
+	mt_cirq_write32(bit, (cirq_num / 32U) * 4U + CIRQ_MASK_SET_BASE);
+	return 0;
+}
+
+/*
+ * mt_cirq_unmask: Unmask the specified SYS_CIRQ.
+ * @cirq_num: the SYS_CIRQ number to unmask
+ * @return:
+ *    0: umask success
+ *   -1: cirq num is out of range
+ */
+static int mt_cirq_unmask(uint32_t cirq_num)
+{
+	uint32_t bit = 1U << (cirq_num % 32U);
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return -1;
+	}
+
+	mt_cirq_write32(bit, (cirq_num / 32U) * 4U + CIRQ_MASK_CLR_BASE);
+	return 0;
+}
+
+/*
+ * mt_cirq_set_sens: Set the sensitivity for the specified SYS_CIRQ number.
+ * @cirq_num: the SYS_CIRQ number to set
+ * @sens: sensitivity to set
+ * @return:
+ *    0: set sens success
+ *   -1: cirq num is out of range
+ */
+static int mt_cirq_set_sens(uint32_t cirq_num, uint32_t sens)
+{
+	uint32_t base;
+	uint32_t bit = 1U << (cirq_num % 32U);
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return -1;
+	}
+
+	if (sens == MT_CIRQ_EDGE_SENSITIVE) {
+		base = (cirq_num / 32U) * 4U + CIRQ_SENS_CLR_BASE;
+	} else if (sens == MT_CIRQ_LEVEL_SENSITIVE) {
+		base = (cirq_num / 32U) * 4U + CIRQ_SENS_SET_BASE;
+	} else {
+		ERROR("[CIRQ] set_sens invalid sen value %u\n", sens);
+		return -1;
+	}
+
+	mt_cirq_write32(bit, base);
+	return 0;
+}
+
+/*
+ * mt_cirq_get_sens: Get the specified SYS_CIRQ sensitivity
+ * @cirq_num: the SYS_CIRQ number to get
+ * @return:
+ *    1: this cirq is MT_LEVEL_SENSITIVE
+ *    0: this cirq is MT_EDGE_SENSITIVE
+ *    2: cirq num is out of range
+ */
+__attribute__((weak)) unsigned int mt_cirq_get_sens(uint32_t cirq_num)
+{
+	uint32_t st;
+	unsigned int val;
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return 2;
+	}
+
+	st = mt_cirq_read32((cirq_num / 32U) * 4U + CIRQ_SENS_BASE);
+	val = (st >> (cirq_num % 32U)) & 1U;
+	return val;
+}
+
+/*
+ * mt_cirq_set_pol: Set the polarity for the specified SYS_CIRQ number.
+ * @cirq_num: the SYS_CIRQ number to set
+ * @pol: polarity to set
+ * @return:
+ *    0: set pol success
+ *   -1: cirq num is out of range
+ */
+static int mt_cirq_set_pol(uint32_t cirq_num, uint32_t pol)
+{
+	uint32_t base;
+	uint32_t bit = 1U << (cirq_num % 32U);
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return -1;
+	}
+
+	if (pol == MT_CIRQ_POL_NEG) {
+		base = (cirq_num / 32U) * 4U + CIRQ_POL_CLR_BASE;
+	} else if (pol == MT_CIRQ_POL_POS) {
+		base = (cirq_num / 32U) * 4U + CIRQ_POL_SET_BASE;
+	} else {
+		ERROR("[CIRQ] set_pol invalid polarity value %u\n", pol);
+		return -1;
+	}
+
+	mt_cirq_write32(bit, base);
+	return 0;
+}
+
+/*
+ * mt_cirq_get_pol: Get the specified SYS_CIRQ polarity
+ * @cirq_num: the SYS_CIRQ number to get
+ * @return:
+ *    1: this cirq is MT_CIRQ_POL_POS
+ *    0: this cirq is MT_CIRQ_POL_NEG
+ *    2: cirq num is out of range
+ */
+__attribute__((weak)) unsigned int mt_cirq_get_pol(uint32_t cirq_num)
+{
+	uint32_t st;
+	unsigned int val;
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return 2;
+	}
+
+	st = mt_cirq_read32((cirq_num / 32U) * 4U + CIRQ_POL_BASE);
+	val = (st >> (cirq_num % 32U)) & 1U;
+	return val;
+}
+
+/*
+ * mt_cirq_get_pending: Get the specified SYS_CIRQ pending
+ * @cirq_num: the SYS_CIRQ number to get
+ * @return:
+ *    1: this cirq is pending
+ *    0: this cirq is not pending
+ *    2: cirq num is out of range
+ */
+static unsigned int mt_cirq_get_pending(uint32_t cirq_num)
+{
+	uint32_t st;
+	unsigned int val;
+
+	if (cirq_num >= CIRQ_IRQ_NUM) {
+		ERROR("[CIRQ] %s: invalid cirq %u\n", __func__, cirq_num);
+		return 2;
+	}
+
+	st = mt_cirq_read32((cirq_num / 32U) * 4U + CIRQ_STA_BASE);
+	val = (st >> (cirq_num % 32U)) & 1U;
+	return val;
+}
+
+/*
+ * mt_cirq_clone_pol: Copy the polarity setting from GIC to SYS_CIRQ
+ */
+void mt_cirq_clone_pol(void)
+{
+	uint32_t cirq_num;
+
+	for (cirq_num = 0U; cirq_num < CIRQ_IRQ_NUM; cirq_num++) {
+		mt_cirq_set_pol(cirq_num, MT_CIRQ_POL_POS);
+	}
+}
+
+/*
+ * mt_cirq_clone_sens: Copy the sensitivity setting from GIC to SYS_CIRQ
+ */
+void mt_cirq_clone_sens(void)
+{
+	uint32_t cirq_num, irq_num;
+	uint32_t st, val;
+
+	for (cirq_num = 0U; cirq_num < CIRQ_IRQ_NUM; cirq_num++) {
+		irq_num = CIRQ_TO_IRQ_NUM(cirq_num);
+
+		if ((cirq_num == 0U) || (irq_num % 16U == 0U)) {
+			st = mmio_read_32(BASE_GICD_BASE + GICD_ICFGR +
+				(irq_num / 16U * 4U));
+		}
+
+		val = (st >> ((irq_num % 16U) * 2U)) & 0x2U;
+
+		if (val) {
+			mt_cirq_set_sens(cirq_num, MT_CIRQ_EDGE_SENSITIVE);
+		} else {
+			mt_cirq_set_sens(cirq_num, MT_CIRQ_LEVEL_SENSITIVE);
+		}
+	}
+}
+
+/*
+ * mt_cirq_clone_mask: Copy the mask setting from GIC to SYS_CIRQ
+ */
+void mt_cirq_clone_mask(void)
+{
+	uint32_t cirq_num, irq_num;
+	uint32_t st, val;
+
+	for (cirq_num = 0U; cirq_num < CIRQ_IRQ_NUM; cirq_num++) {
+		irq_num = CIRQ_TO_IRQ_NUM(cirq_num);
+
+		if ((cirq_num == 0U) || (irq_num % 32U == 0U)) {
+			st = mmio_read_32(BASE_GICD_BASE +
+				GICD_ISENABLER + (irq_num / 32U * 4U));
+		}
+
+		val = (st >> (irq_num % 32)) & 1U;
+
+		if (val) {
+			mt_cirq_unmask(cirq_num);
+		} else {
+			mt_cirq_mask(cirq_num);
+		}
+	}
+}
+
+/*
+ * mt_cirq_clone_gic: Copy the setting from GIC to SYS_CIRQ
+ */
+void mt_cirq_clone_gic(void)
+{
+	mt_cirq_clone_sens();
+	mt_cirq_clone_mask();
+}
+
+/*
+ * mt_cirq_disable: Flush interrupt from SYS_CIRQ to GIC
+ */
+void mt_cirq_flush(void)
+{
+	unsigned int i;
+	unsigned char cirq_p_val = 0U;
+	unsigned char irq_p_val = 0U;
+	uint32_t irq_p = 0U;
+	unsigned char pass = 1U;
+	uint32_t first_cirq_found = 0U;
+	uint32_t first_flushed_cirq;
+	uint32_t first_irq_flushedto;
+	uint32_t last_fluashed_cirq;
+	uint32_t last_irq_flushedto;
+
+	if (cirq_pattern_clone_flush_check_val == 1U) {
+		if (cirq_pattern_list < CIRQ_IRQ_NUM) {
+			mt_cirq_unmask(cirq_pattern_list);
+			mt_cirq_set_sens(cirq_pattern_list,
+				MT_CIRQ_EDGE_SENSITIVE);
+			mt_cirq_set_pol(cirq_pattern_list, MT_CIRQ_POL_NEG);
+			mt_cirq_set_pol(cirq_pattern_list, MT_CIRQ_POL_POS);
+			mt_cirq_set_pol(cirq_pattern_list, MT_CIRQ_POL_NEG);
+		} else {
+			ERROR("[CIRQ] no pattern to test,");
+			ERROR("input pattern first\n");
+		}
+		ERROR("[CIRQ] cirq_pattern %u, cirq_p %u,",
+				cirq_pattern_list,
+				mt_cirq_get_pending(cirq_pattern_list));
+		ERROR("cirq_s %u, cirq_con 0x%x\n",
+				mt_cirq_get_sens(cirq_pattern_list),
+				mt_cirq_read32(CIRQ_CON));
+	}
+
+	mt_cirq_unmask_all();
+
+	for (i = 0U; i < CIRQ_IRQ_NUM; i++) {
+		cirq_p_val = mt_cirq_get_pending(i);
+		if (cirq_p_val) {
+			mt_irq_set_pending(CIRQ_TO_IRQ_NUM(i));
+		}
+
+		if (cirq_clone_flush_check_val == 1U) {
+			if (cirq_p_val == 0U) {
+				continue;
+		}
+			irq_p = CIRQ_TO_IRQ_NUM(i);
+			irq_p_val = mt_irq_get_pending(irq_p);
+			if (cirq_p_val != irq_p_val) {
+				ERROR("[CIRQ] CIRQ Flush Failed ");
+				ERROR("%u(cirq %d)!= %u(gic %d)\n",
+					cirq_p_val, i, irq_p_val,
+					CIRQ_TO_IRQ_NUM(i));
+				pass = 0;
+			} else {
+				ERROR("[CIRQ] CIRQ Flush Pass ");
+				ERROR("%u(cirq %d) = %u(gic %d)\n",
+					cirq_p_val, i, irq_p_val,
+					CIRQ_TO_IRQ_NUM(i));
+			}
+			if (!first_cirq_found) {
+				first_flushed_cirq = i;
+				first_irq_flushedto = irq_p;
+				first_cirq_found = 1U;
+			}
+			last_fluashed_cirq = i;
+			last_irq_flushedto = irq_p;
+		}
+	}
+
+	if (cirq_clone_flush_check_val == 1U) {
+		if (first_cirq_found) {
+			ERROR("[CIRQ] The first flush : CIRQ%u to IRQ%u\n",
+				first_flushed_cirq, first_irq_flushedto);
+			ERROR("[CIRQ] The last flush : CIRQ%u to IRQ%u\n",
+				last_fluashed_cirq, last_irq_flushedto);
+		} else {
+			ERROR("[CIRQ] There are no pending ");
+			ERROR("interrupt in CIRQ\n");
+			ERROR("[CIRQ] so no flush operation happened\n");
+		}
+		ERROR("[CIRQ] The Flush Max Range : CIRQ");
+		ERROR("%d to IRQ%d ~ CIRQ%d to IRQ%d\n", 0U,
+			CIRQ_TO_IRQ_NUM(0U), CIRQ_IRQ_NUM - 1U,
+			CIRQ_TO_IRQ_NUM(CIRQ_IRQ_NUM - 1U));
+		ERROR("[CIRQ] Flush Check %s, Confirm:SPI_START_OFFSET:%d\n",
+			pass == 1 ? "Pass" : "Failed", CIRQ_SPI_START);
+	}
+	mt_cirq_mask_all();
+	mt_cirq_ack_all();
+}
+
+void mt_cirq_sw_reset(void)
+{
+	uint32_t st;
+
+	st = mt_cirq_read32(CIRQ_CON);
+	st |= (CIRQ_SW_RESET << CIRQ_CON_SW_RST_BITS);
+
+	mt_cirq_write32(st, CIRQ_CON);
+}
+
+void set_wakeup_sources(uint32_t *list, uint32_t num_of_events)
+{
+	cirq_all_events.num_of_events = num_of_events;
+	cirq_all_events.wakeup_events = list;
+}