diff --git a/plat/nvidia/tegra/soc/t186/drivers/mce/ari.c b/plat/nvidia/tegra/soc/t186/drivers/mce/ari.c
index e11d160..1168645 100644
--- a/plat/nvidia/tegra/soc/t186/drivers/mce/ari.c
+++ b/plat/nvidia/tegra/soc/t186/drivers/mce/ari.c
@@ -129,6 +129,9 @@
 		return EINVAL;
 	}
 
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	/* Enter the cstate, to be woken up after wake_time (TSC ticks) */
 	return ari_request_wait(ari_base, ARI_EVT_MASK_STANDBYWFI_BIT,
 		TEGRA_ARI_ENTER_CSTATE, state, wake_time);
@@ -140,6 +143,9 @@
 {
 	uint32_t val = 0;
 
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	/* update CLUSTER_CSTATE? */
 	if (cluster)
 		val |= (cluster & CLUSTER_CSTATE_MASK) |
@@ -172,6 +178,9 @@
 	    (type > TEGRA_ARI_CROSSOVER_CCP3_SC1))
 		return EINVAL;
 
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	/* update crossover threshold time */
 	return ari_request_wait(ari_base, 0, TEGRA_ARI_UPDATE_CROSSOVER,
 			type, time);
@@ -185,6 +194,9 @@
 	if (state == 0)
 		return EINVAL;
 
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	ret = ari_request_wait(ari_base, 0, TEGRA_ARI_CSTATE_STATS, state, 0);
 	if (ret != 0)
 		return EINVAL;
@@ -194,6 +206,9 @@
 
 int ari_write_cstate_stats(uint32_t ari_base, uint32_t state, uint32_t stats)
 {
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	/* write the cstate stats */
 	return ari_request_wait(ari_base, 0, TEGRA_ARI_WRITE_CSTATE_STATS, state,
 			stats);
@@ -226,6 +241,9 @@
 {
 	int ret;
 
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	ret = ari_request_wait(ari_base, 0, TEGRA_ARI_IS_CCX_ALLOWED, state & 0x7,
 			wake_time);
 	if (ret) {
@@ -248,6 +266,9 @@
 		return EINVAL;
 	}
 
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	ret = ari_request_wait(ari_base, 0, TEGRA_ARI_IS_SC7_ALLOWED, state,
 			wake_time);
 	if (ret) {
@@ -283,6 +304,9 @@
 		return EINVAL;
 	}
 
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	return ari_request_wait(ari_base, 0, TEGRA_ARI_ONLINE_CORE, core, 0);
 }
 
@@ -290,6 +314,9 @@
 {
 	int val;
 
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	/*
 	 * If the enable bit is cleared, Auto-CC3 will be disabled by setting
 	 * the SW visible voltage/frequency request registers for all non
@@ -309,6 +336,9 @@
 
 int ari_reset_vector_update(uint32_t ari_base, uint32_t lo, uint32_t hi)
 {
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	/*
 	 * Need to program the CPU reset vector one time during cold boot
 	 * and SC7 exit
@@ -320,18 +350,27 @@
 
 int ari_roc_flush_cache_trbits(uint32_t ari_base)
 {
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	return ari_request_wait(ari_base, 0, TEGRA_ARI_ROC_FLUSH_CACHE_TRBITS,
 			0, 0);
 }
 
 int ari_roc_flush_cache(uint32_t ari_base)
 {
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	return ari_request_wait(ari_base, 0, TEGRA_ARI_ROC_FLUSH_CACHE_ONLY,
 			0, 0);
 }
 
 int ari_roc_clean_cache(uint32_t ari_base)
 {
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	return ari_request_wait(ari_base, 0, TEGRA_ARI_ROC_CLEAN_CACHE_ONLY,
 			0, 0);
 }
@@ -372,6 +411,9 @@
 	if (gsc_idx > TEGRA_ARI_GSC_VPR_IDX)
 		return EINVAL;
 
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	/*
 	 * The MCE code will read the GSC carveout value, corrseponding to
 	 * the ID, from the MC registers and update the internal GSC registers
@@ -384,6 +426,9 @@
 
 void ari_enter_ccplex_state(uint32_t ari_base, uint32_t state_idx)
 {
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	/*
 	 * The MCE will shutdown or restart the entire system
 	 */
@@ -396,6 +441,9 @@
 	int ret;
 	uint32_t val;
 
+	/* clean the previous response state */
+	ari_clobber_response(ari_base);
+
 	/* sanity check input parameters */
 	if (req.perfmon_command.cmd == UNCORE_PERFMON_CMD_READ && !data) {
 		ERROR("invalid parameters\n");