plat: imx8mm: Add in BL2 with FIP
Adds bl2 with FIP to the build required for mbed Linux booting where
we do:
BootROM -> SPL -> BL2 -> OPTEE -> u-boot
If NEED_BL2 is specified then BL2 will be built and BL31 will have
its address range modified upwards to accommodate. BL31 must be
loaded from a FIP in this case.
If NEED_BL2 is not specified then the current BL31 boot flow is
unaffected and u-boot SPL will load and execute BL31 directly.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I655343b3b689b1fc57cfbedda4d3dc2fbd549a96
diff --git a/plat/imx/imx8m/imx8mm/imx8mm_bl2_mem_params_desc.c b/plat/imx/imx8m/imx8mm/imx8mm_bl2_mem_params_desc.c
new file mode 100644
index 0000000..e44345d
--- /dev/null
+++ b/plat/imx/imx8m/imx8mm/imx8mm_bl2_mem_params_desc.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <common/desc_image_load.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+static bl_mem_params_node_t bl2_mem_params_descs[] = {
+ {
+ .image_id = BL31_IMAGE_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP, VERSION_2,
+ entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = BL31_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2, image_info_t,
+ IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = BL31_BASE,
+ .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
+ {
+ .image_id = BL32_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP, VERSION_2,
+ entry_point_info_t,
+ SECURE | EXECUTABLE),
+ .ep_info.pc = BL32_BASE,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2,
+ image_info_t, 0),
+
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_SIZE,
+
+ .next_handoff_image_id = BL33_IMAGE_ID,
+ },
+ {
+ .image_id = BL32_EXTRA1_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP, VERSION_2,
+ entry_point_info_t,
+ SECURE | NON_EXECUTABLE),
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2,
+ image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_SIZE,
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
+ {
+ /* This is a zero sized image so we don't set base or size */
+ .image_id = BL32_EXTRA2_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | NON_EXECUTABLE),
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t,
+ IMAGE_ATTRIB_SKIP_LOADING),
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
+ {
+ .image_id = BL33_IMAGE_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP, VERSION_2,
+ entry_point_info_t,
+ NON_SECURE | EXECUTABLE),
+ # ifdef PRELOADED_BL33_BASE
+ .ep_info.pc = PLAT_NS_IMAGE_OFFSET,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t,
+ IMAGE_ATTRIB_SKIP_LOADING),
+ # else
+ .ep_info.pc = PLAT_NS_IMAGE_OFFSET,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = PLAT_NS_IMAGE_OFFSET,
+ .image_info.image_max_size = PLAT_NS_IMAGE_SIZE,
+ # endif /* PRELOADED_BL33_BASE */
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ }
+};
+
+REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs);