Tegra210B01: SE1 and SE2/PKA1 context save (atomic)
This patch adds the implementation of the SE atomic context save
sequence. The atomic context-save consistently saves to the TZRAM
carveout; thus there is no need to declare context save buffer or
map MMU region in TZRAM for context save. The atomic context-save
routine is responsible to validate the context-save progress
counter, where CTX_SAVE_CNT=133(SE1)/646(SE2), and the SE error
status to ensure the context save procedure complete successfully.
Change-Id: Ic80843902af70e76415530266cb158f668976c42
Signed-off-by: Marvin Hsu <marvinh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
diff --git a/plat/nvidia/tegra/include/drivers/security_engine.h b/plat/nvidia/tegra/include/drivers/security_engine.h
new file mode 100644
index 0000000..abfb217
--- /dev/null
+++ b/plat/nvidia/tegra/include/drivers/security_engine.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017, NVIDIA CORPORATION. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SECURITY_ENGINE_H
+#define SECURITY_ENGINE_H
+
+/*******************************************************************************
+ * Structure definition
+ ******************************************************************************/
+
+/* Security Engine Linked List */
+struct tegra_se_ll {
+ /* DMA buffer address */
+ uint32_t addr;
+ /* Data length in DMA buffer */
+ uint32_t data_len;
+};
+
+#define SE_LL_MAX_BUFFER_NUM 4
+typedef struct tegra_se_io_lst {
+ volatile uint32_t last_buff_num;
+ volatile struct tegra_se_ll buffer[SE_LL_MAX_BUFFER_NUM];
+} tegra_se_io_lst_t __attribute__((aligned(4)));
+
+/* SE device structure */
+typedef struct tegra_se_dev {
+ /* Security Engine ID */
+ const int se_num;
+ /* SE base address */
+ const uint64_t se_base;
+ /* SE context size in AES blocks */
+ const uint32_t ctx_size_blks;
+ /* pointer to source linked list buffer */
+ tegra_se_io_lst_t *src_ll_buf;
+ /* pointer to destination linked list buffer */
+ tegra_se_io_lst_t *dst_ll_buf;
+} tegra_se_dev_t;
+
+/*******************************************************************************
+ * Public interface
+ ******************************************************************************/
+void tegra_se_init(void);
+int tegra_se_suspend(void);
+void tegra_se_resume(void);
+int tegra_se_save_tzram(void);
+
+#endif /* SECURITY_ENGINE_H */
diff --git a/plat/nvidia/tegra/include/t210/tegra_def.h b/plat/nvidia/tegra/include/t210/tegra_def.h
index 14cdfd5..ec9b68e 100644
--- a/plat/nvidia/tegra/include/t210/tegra_def.h
+++ b/plat/nvidia/tegra/include/t210/tegra_def.h
@@ -74,6 +74,11 @@
#define TEGRA_FLOWCTRL_BASE U(0x60007000)
/*******************************************************************************
+ * Tegra AHB arbitration controller
+ ******************************************************************************/
+#define TEGRA_AHB_ARB_BASE 0x6000C000UL
+
+/*******************************************************************************
* Tegra Secure Boot Controller constants
******************************************************************************/
#define TEGRA_SB_BASE U(0x6000C200)
@@ -119,6 +124,15 @@
#define MC_VIDEO_PROTECT_SIZE_MB U(0x64c)
/*******************************************************************************
+ * Tegra SE constants
+ ******************************************************************************/
+#define TEGRA_SE1_BASE U(0x70012000)
+#define TEGRA_SE2_BASE U(0x70412000)
+#define TEGRA_PKA1_BASE U(0x70420000)
+#define TEGRA_SE2_RANGE_SIZE U(0x2000)
+#define SE_TZRAM_SECURITY U(0x4)
+
+/*******************************************************************************
* Tegra TZRAM constants
******************************************************************************/
#define TEGRA_TZRAM_BASE U(0x7C010000)
diff --git a/plat/nvidia/tegra/soc/t210/drivers/se/se_private.h b/plat/nvidia/tegra/soc/t210/drivers/se/se_private.h
new file mode 100644
index 0000000..8cf687c
--- /dev/null
+++ b/plat/nvidia/tegra/soc/t210/drivers/se/se_private.h
@@ -0,0 +1,226 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017, NVIDIA CORPORATION. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SE_PRIVATE_H
+#define SE_PRIVATE_H
+
+#include <stdbool.h>
+#include <security_engine.h>
+
+/*
+ * PMC registers
+ */
+
+/* Secure scratch registers */
+#define PMC_SECURE_SCRATCH4_OFFSET 0xC0U
+#define PMC_SECURE_SCRATCH5_OFFSET 0xC4U
+#define PMC_SECURE_SCRATCH6_OFFSET 0x224U
+#define PMC_SECURE_SCRATCH7_OFFSET 0x228U
+#define PMC_SECURE_SCRATCH120_OFFSET 0xB38U
+#define PMC_SECURE_SCRATCH121_OFFSET 0xB3CU
+#define PMC_SECURE_SCRATCH122_OFFSET 0xB40U
+#define PMC_SECURE_SCRATCH123_OFFSET 0xB44U
+
+/*
+ * AHB arbitration memory write queue
+ */
+#define ARAHB_MEM_WRQUE_MST_ID_OFFSET 0xFCU
+#define ARAHB_MST_ID_SE2_MASK (0x1U << 13)
+#define ARAHB_MST_ID_SE_MASK (0x1U << 14)
+
+/* SE Status register */
+#define SE_STATUS_OFFSET 0x800U
+#define SE_STATUS_SHIFT 0
+#define SE_STATUS_IDLE \
+ ((0U) << SE_STATUS_SHIFT)
+#define SE_STATUS_BUSY \
+ ((1U) << SE_STATUS_SHIFT)
+#define SE_STATUS(x) \
+ ((x) & ((0x3U) << SE_STATUS_SHIFT))
+
+/* SE config register */
+#define SE_CONFIG_REG_OFFSET 0x14U
+#define SE_CONFIG_ENC_ALG_SHIFT 12
+#define SE_CONFIG_ENC_ALG_AES_ENC \
+ ((1U) << SE_CONFIG_ENC_ALG_SHIFT)
+#define SE_CONFIG_ENC_ALG_RNG \
+ ((2U) << SE_CONFIG_ENC_ALG_SHIFT)
+#define SE_CONFIG_ENC_ALG_SHA \
+ ((3U) << SE_CONFIG_ENC_ALG_SHIFT)
+#define SE_CONFIG_ENC_ALG_RSA \
+ ((4U) << SE_CONFIG_ENC_ALG_SHIFT)
+#define SE_CONFIG_ENC_ALG_NOP \
+ ((0U) << SE_CONFIG_ENC_ALG_SHIFT)
+#define SE_CONFIG_ENC_ALG(x) \
+ ((x) & ((0xFU) << SE_CONFIG_ENC_ALG_SHIFT))
+
+#define SE_CONFIG_DEC_ALG_SHIFT 8
+#define SE_CONFIG_DEC_ALG_AES \
+ ((1U) << SE_CONFIG_DEC_ALG_SHIFT)
+#define SE_CONFIG_DEC_ALG_NOP \
+ ((0U) << SE_CONFIG_DEC_ALG_SHIFT)
+#define SE_CONFIG_DEC_ALG(x) \
+ ((x) & ((0xFU) << SE_CONFIG_DEC_ALG_SHIFT))
+
+#define SE_CONFIG_DST_SHIFT 2
+#define SE_CONFIG_DST_MEMORY \
+ ((0U) << SE_CONFIG_DST_SHIFT)
+#define SE_CONFIG_DST_HASHREG \
+ ((1U) << SE_CONFIG_DST_SHIFT)
+#define SE_CONFIG_DST_KEYTAB \
+ ((2U) << SE_CONFIG_DST_SHIFT)
+#define SE_CONFIG_DST_SRK \
+ ((3U) << SE_CONFIG_DST_SHIFT)
+#define SE_CONFIG_DST_RSAREG \
+ ((4U) << SE_CONFIG_DST_SHIFT)
+#define SE_CONFIG_DST(x) \
+ ((x) & ((0x7U) << SE_CONFIG_DST_SHIFT))
+
+/* DRNG random number generator config */
+#define SE_RNG_SRC_CONFIG_REG_OFFSET 0x344U
+
+#define DRBG_RO_ENT_SRC_SHIFT 1
+#define DRBG_RO_ENT_SRC_ENABLE \
+ ((1U) << DRBG_RO_ENT_SRC_SHIFT)
+#define DRBG_RO_ENT_SRC_DISABLE \
+ ((0U) << DRBG_RO_ENT_SRC_SHIFT)
+#define SE_RNG_SRC_CONFIG_RO_ENT_SRC(x) \
+ ((x) & ((0x1U) << DRBG_RO_ENT_SRC_SHIFT))
+
+#define DRBG_RO_ENT_SRC_LOCK_SHIFT 0
+#define DRBG_RO_ENT_SRC_LOCK_ENABLE \
+ ((1U) << DRBG_RO_ENT_SRC_LOCK_SHIFT)
+#define DRBG_RO_ENT_SRC_LOCK_DISABLE \
+ ((0U) << DRBG_RO_ENT_SRC_LOCK_SHIFT)
+#define SE_RNG_SRC_CONFIG_RO_ENT_SRC_LOCK(x) \
+ ((x) & ((0x1U) << DRBG_RO_ENT_SRC_LOCK_SHIFT))
+
+#define DRBG_RO_ENT_IGNORE_MEM_SHIFT 12
+#define DRBG_RO_ENT_IGNORE_MEM_ENABLE \
+ ((1U) << DRBG_RO_ENT_IGNORE_MEM_SHIFT)
+#define DRBG_RO_ENT_IGNORE_MEM_DISABLE \
+ ((0U) << DRBG_RO_ENT_IGNORE_MEM_SHIFT)
+#define SE_RNG_SRC_CONFIG_RO_ENT_IGNORE_MEM(x) \
+ ((x) & ((0x1U) << DRBG_RO_ENT_IGNORE_MEM_SHIFT))
+
+/* SE OPERATION */
+#define SE_OPERATION_REG_OFFSET 0x8U
+#define SE_OPERATION_SHIFT 0
+#define SE_OP_ABORT \
+ ((0x0U) << SE_OPERATION_SHIFT)
+#define SE_OP_START \
+ ((0x1U) << SE_OPERATION_SHIFT)
+#define SE_OP_RESTART \
+ ((0x2U) << SE_OPERATION_SHIFT)
+#define SE_OP_CTX_SAVE \
+ ((0x3U) << SE_OPERATION_SHIFT)
+#define SE_OP_RESTART_IN \
+ ((0x4U) << SE_OPERATION_SHIFT)
+#define SE_OPERATION(x) \
+ ((x) & ((0x7U) << SE_OPERATION_SHIFT))
+
+/* SE_CTX_SAVE_AUTO */
+#define SE_CTX_SAVE_AUTO_REG_OFFSET 0x74U
+
+/* Enable */
+#define SE_CTX_SAVE_AUTO_ENABLE_SHIFT 0
+#define SE_CTX_SAVE_AUTO_DIS \
+ ((0U) << SE_CTX_SAVE_AUTO_ENABLE_SHIFT)
+#define SE_CTX_SAVE_AUTO_EN \
+ ((1U) << SE_CTX_SAVE_AUTO_ENABLE_SHIFT)
+#define SE_CTX_SAVE_AUTO_ENABLE(x) \
+ ((x) & ((0x1U) << SE_CTX_SAVE_AUTO_ENABLE_SHIFT))
+
+/* Lock */
+#define SE_CTX_SAVE_AUTO_LOCK_SHIFT 8
+#define SE_CTX_SAVE_AUTO_LOCK_EN \
+ ((1U) << SE_CTX_SAVE_AUTO_LOCK_SHIFT)
+#define SE_CTX_SAVE_AUTO_LOCK_DIS \
+ ((0U) << SE_CTX_SAVE_AUTO_LOCK_SHIFT)
+#define SE_CTX_SAVE_AUTO_LOCK(x) \
+ ((x) & ((0x1U) << SE_CTX_SAVE_AUTO_LOCK_SHIFT))
+
+/* Current context save number of blocks */
+#define SE_CTX_SAVE_AUTO_CURR_CNT_SHIFT 16
+#define SE_CTX_SAVE_AUTO_CURR_CNT_MASK 0x3FFU
+#define SE_CTX_SAVE_GET_BLK_COUNT(x) \
+ (((x) >> SE_CTX_SAVE_AUTO_CURR_CNT_SHIFT) & \
+ SE_CTX_SAVE_AUTO_CURR_CNT_MASK)
+
+#define SE_CTX_SAVE_SIZE_BLOCKS_SE1 133
+#define SE_CTX_SAVE_SIZE_BLOCKS_SE2 646
+
+/* SE TZRAM OPERATION - only for SE1 */
+#define SE_TZRAM_OPERATION 0x540U
+
+#define SE_TZRAM_OP_MODE_SHIFT 1
+#define SE_TZRAM_OP_MODE_SAVE \
+ ((0U) << SE_TZRAM_OP_MODE_SHIFT)
+#define SE_TZRAM_OP_MODE_RESTORE \
+ ((1U) << SE_TZRAM_OP_MODE_SHIFT)
+#define SE_TZRAM_OP_MODE(x) \
+ ((x) & ((0x1U) << SE_TZRAM_OP_MODE_SHIFT))
+
+#define SE_TZRAM_OP_BUSY_SHIFT 2
+#define SE_TZRAM_OP_BUSY_OFF \
+ ((0U) << SE_TZRAM_OP_BUSY_SHIFT)
+#define SE_TZRAM_OP_BUSY_ON \
+ ((1U) << SE_TZRAM_OP_BUSY_SHIFT)
+#define SE_TZRAM_OP_BUSY(x) \
+ ((x) & ((0x1U) << SE_TZRAM_OP_BUSY_SHIFT))
+
+#define SE_TZRAM_OP_REQ_SHIFT 0
+#define SE_TZRAM_OP_REQ_IDLE \
+ ((0U) << SE_TZRAM_OP_REQ_SHIFT)
+#define SE_TZRAM_OP_REQ_INIT \
+ ((1U) << SE_TZRAM_OP_REQ_SHIFT)
+#define SE_TZRAM_OP_REQ(x) \
+ ((x) & ((0x1U) << SE_TZRAM_OP_REQ_SHIFT))
+
+/* SE Interrupt */
+#define SE_INT_STATUS_REG_OFFSET 0x10U
+#define SE_INT_OP_DONE_SHIFT 4
+#define SE_INT_OP_DONE_CLEAR \
+ ((0U) << SE_INT_OP_DONE_SHIFT)
+#define SE_INT_OP_DONE_ACTIVE \
+ ((1U) << SE_INT_OP_DONE_SHIFT)
+#define SE_INT_OP_DONE(x) \
+ ((x) & ((0x1U) << SE_INT_OP_DONE_SHIFT))
+
+/* SE error status */
+#define SE_ERR_STATUS_REG_OFFSET 0x804U
+
+/* SE linked list (LL) register */
+#define SE_IN_LL_ADDR_REG_OFFSET 0x18U
+#define SE_OUT_LL_ADDR_REG_OFFSET 0x24U
+#define SE_BLOCK_COUNT_REG_OFFSET 0x318U
+
+/* AES data sizes */
+#define TEGRA_SE_AES_BLOCK_SIZE 16
+#define TEGRA_SE_AES_MIN_KEY_SIZE 16
+#define TEGRA_SE_AES_MAX_KEY_SIZE 32
+#define TEGRA_SE_AES_IV_SIZE 16
+
+/*******************************************************************************
+ * Inline functions definition
+ ******************************************************************************/
+
+static inline uint32_t tegra_se_read_32(const tegra_se_dev_t *dev, uint32_t offset)
+{
+ return mmio_read_32(dev->se_base + offset);
+}
+
+static inline void tegra_se_write_32(const tegra_se_dev_t *dev, uint32_t offset, uint32_t val)
+{
+ mmio_write_32(dev->se_base + offset, val);
+}
+
+/*******************************************************************************
+ * Prototypes
+ ******************************************************************************/
+
+#endif /* SE_PRIVATE_H */
diff --git a/plat/nvidia/tegra/soc/t210/drivers/se/security_engine.c b/plat/nvidia/tegra/soc/t210/drivers/se/security_engine.c
new file mode 100644
index 0000000..345b7d8
--- /dev/null
+++ b/plat/nvidia/tegra/soc/t210/drivers/se/security_engine.c
@@ -0,0 +1,410 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017, NVIDIA CORPORATION. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <common/debug.h>
+#include <delay_timer.h>
+#include <errno.h>
+#include <mmio.h>
+#include <psci.h>
+#include <se_private.h>
+#include <security_engine.h>
+#include <tegra_platform.h>
+
+/*******************************************************************************
+ * Constants and Macros
+ ******************************************************************************/
+
+#define TIMEOUT_100MS 100UL // Timeout in 100ms
+
+/*******************************************************************************
+ * Data structure and global variables
+ ******************************************************************************/
+
+/* The security engine contexts are formatted as follows:
+ *
+ * SE1 CONTEXT:
+ * #--------------------------------#
+ * | Random Data 1 Block |
+ * #--------------------------------#
+ * | Sticky Bits 2 Blocks |
+ * #--------------------------------#
+ * | Key Table 64 Blocks |
+ * | For each Key (x16): |
+ * | Key: 2 Blocks |
+ * | Original-IV: 1 Block |
+ * | Updated-IV: 1 Block |
+ * #--------------------------------#
+ * | RSA Keys 64 Blocks |
+ * #--------------------------------#
+ * | Known Pattern 1 Block |
+ * #--------------------------------#
+ *
+ * SE2/PKA1 CONTEXT:
+ * #--------------------------------#
+ * | Random Data 1 Block |
+ * #--------------------------------#
+ * | Sticky Bits 2 Blocks |
+ * #--------------------------------#
+ * | Key Table 64 Blocks |
+ * | For each Key (x16): |
+ * | Key: 2 Blocks |
+ * | Original-IV: 1 Block |
+ * | Updated-IV: 1 Block |
+ * #--------------------------------#
+ * | RSA Keys 64 Blocks |
+ * #--------------------------------#
+ * | PKA sticky bits 1 Block |
+ * #--------------------------------#
+ * | PKA keys 512 Blocks |
+ * #--------------------------------#
+ * | Known Pattern 1 Block |
+ * #--------------------------------#
+ */
+
+/* SE input and output linked list buffers */
+static tegra_se_io_lst_t se1_src_ll_buf;
+static tegra_se_io_lst_t se1_dst_ll_buf;
+
+/* SE2 input and output linked list buffers */
+static tegra_se_io_lst_t se2_src_ll_buf;
+static tegra_se_io_lst_t se2_dst_ll_buf;
+
+/* SE1 security engine device handle */
+static tegra_se_dev_t se_dev_1 = {
+ .se_num = 1,
+ /* setup base address for se */
+ .se_base = TEGRA_SE1_BASE,
+ /* Setup context size in AES blocks */
+ .ctx_size_blks = SE_CTX_SAVE_SIZE_BLOCKS_SE1,
+ /* Setup SRC buffers for SE operations */
+ .src_ll_buf = &se1_src_ll_buf,
+ /* Setup DST buffers for SE operations */
+ .dst_ll_buf = &se1_dst_ll_buf,
+};
+
+/* SE2 security engine device handle */
+static tegra_se_dev_t se_dev_2 = {
+ .se_num = 2,
+ /* setup base address for se */
+ .se_base = TEGRA_SE2_BASE,
+ /* Setup context size in AES blocks */
+ .ctx_size_blks = SE_CTX_SAVE_SIZE_BLOCKS_SE2,
+ /* Setup SRC buffers for SE operations */
+ .src_ll_buf = &se2_src_ll_buf,
+ /* Setup DST buffers for SE operations */
+ .dst_ll_buf = &se2_dst_ll_buf,
+};
+
+/*******************************************************************************
+ * Functions Definition
+ ******************************************************************************/
+
+static void tegra_se_make_data_coherent(const tegra_se_dev_t *se_dev)
+{
+ flush_dcache_range(((uint64_t)(se_dev->src_ll_buf)),
+ sizeof(tegra_se_io_lst_t));
+ flush_dcache_range(((uint64_t)(se_dev->dst_ll_buf)),
+ sizeof(tegra_se_io_lst_t));
+}
+
+/*
+ * Check for context save operation complete
+ * This function is invoked after the context save operation,
+ * and it checks the following conditions:
+ * 1. SE_INT_STATUS = SE_OP_DONE
+ * 2. SE_STATUS = IDLE
+ * 3. AHB bus data transfer complete.
+ * 4. SE_ERR_STATUS is clean.
+ */
+static int32_t tegra_se_context_save_complete(const tegra_se_dev_t *se_dev)
+{
+ uint32_t val = 0;
+ int32_t ret = 0;
+ uint32_t timeout;
+
+ /* Poll the SE interrupt register to ensure H/W operation complete */
+ val = tegra_se_read_32(se_dev, SE_INT_STATUS_REG_OFFSET);
+ for (timeout = 0; (SE_INT_OP_DONE(val) == SE_INT_OP_DONE_CLEAR) &&
+ (timeout < TIMEOUT_100MS); timeout++) {
+ mdelay(1);
+ val = tegra_se_read_32(se_dev, SE_INT_STATUS_REG_OFFSET);
+ }
+
+ if (timeout == TIMEOUT_100MS) {
+ ERROR("%s: ERR: Atomic context save operation timeout!\n",
+ __func__);
+ ret = -ETIMEDOUT;
+ }
+
+ /* Poll the SE status idle to ensure H/W operation complete */
+ if (ret == 0) {
+ val = tegra_se_read_32(se_dev, SE_STATUS_OFFSET);
+ for (timeout = 0; (val != 0U) && (timeout < TIMEOUT_100MS);
+ timeout++) {
+ mdelay(1);
+ val = tegra_se_read_32(se_dev, SE_STATUS_OFFSET);
+ }
+
+ if (timeout == TIMEOUT_100MS) {
+ ERROR("%s: ERR: MEM_INTERFACE and SE state "
+ "idle state timeout.\n", __func__);
+ ret = -ETIMEDOUT;
+ }
+ }
+
+ /* Check AHB bus transfer complete */
+ if (ret == 0) {
+ val = mmio_read_32(TEGRA_AHB_ARB_BASE + ARAHB_MEM_WRQUE_MST_ID_OFFSET);
+ for (timeout = 0; ((val & (ARAHB_MST_ID_SE_MASK | ARAHB_MST_ID_SE2_MASK)) != 0U) &&
+ (timeout < TIMEOUT_100MS); timeout++) {
+ mdelay(1);
+ val = mmio_read_32(TEGRA_AHB_ARB_BASE + ARAHB_MEM_WRQUE_MST_ID_OFFSET);
+ }
+
+ if (timeout == TIMEOUT_100MS) {
+ ERROR("%s: SE write over AHB timeout.\n", __func__);
+ ret = -ETIMEDOUT;
+ }
+ }
+
+ /* Ensure that no errors are thrown during operation */
+ if (ret == 0) {
+ val = tegra_se_read_32(se_dev, SE_ERR_STATUS_REG_OFFSET);
+ if (val != 0U) {
+ ERROR("%s: error during SE operation! 0x%x", __func__, val);
+ ret = -ENOTSUP;
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * Verify the SE context save auto has been enabled.
+ * SE_CTX_SAVE_AUTO.ENABLE == ENABLE
+ * If the SE context save auto is not enabled, then set
+ * the context save auto enable and lock the setting.
+ * If the SE context save auto is not enabled and the
+ * enable setting is locked, then return an error.
+ */
+static inline int32_t tegra_se_ctx_save_auto_enable(const tegra_se_dev_t *se_dev)
+{
+ uint32_t val;
+ int32_t ret = 0;
+
+ val = tegra_se_read_32(se_dev, SE_CTX_SAVE_AUTO_REG_OFFSET);
+ if (SE_CTX_SAVE_AUTO_ENABLE(val) == SE_CTX_SAVE_AUTO_DIS) {
+ if (SE_CTX_SAVE_AUTO_LOCK(val) == SE_CTX_SAVE_AUTO_LOCK_EN) {
+ ERROR("%s: ERR: Cannot enable atomic. Write locked!\n",
+ __func__);
+ ret = -EACCES;
+ }
+
+ /* Program SE_CTX_SAVE_AUTO */
+ if (ret == 0) {
+ tegra_se_write_32(se_dev, SE_CTX_SAVE_AUTO_REG_OFFSET,
+ SE_CTX_SAVE_AUTO_LOCK_EN |
+ SE_CTX_SAVE_AUTO_EN);
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * SE atomic context save. At SC7 entry, SE driver triggers the
+ * hardware automatically performs the context save operation.
+ */
+static int32_t tegra_se_context_save_atomic(const tegra_se_dev_t *se_dev)
+{
+ int32_t ret = 0;
+ uint32_t val = 0;
+ uint32_t blk_count_limit = 0;
+ uint32_t block_count, timeout;
+
+ /* Wait for previous operation to finish */
+ val = tegra_se_read_32(se_dev, SE_STATUS_OFFSET);
+ for (timeout = 0; (val != 0U) && (timeout < TIMEOUT_100MS); timeout++) {
+ mdelay(1);
+ val = tegra_se_read_32(se_dev, SE_STATUS_OFFSET);
+ }
+
+ if (timeout == TIMEOUT_100MS) {
+ ERROR("%s: ERR: SE status is not idle!\n", __func__);
+ ret = -ETIMEDOUT;
+ }
+
+ /* Clear any pending interrupts */
+ if (ret == 0) {
+ val = tegra_se_read_32(se_dev, SE_INT_STATUS_REG_OFFSET);
+ tegra_se_write_32(se_dev, SE_INT_STATUS_REG_OFFSET, val);
+
+ /* Ensure HW atomic context save has been enabled
+ * This should have been done at boot time.
+ * SE_CTX_SAVE_AUTO.ENABLE == ENABLE
+ */
+ ret = tegra_se_ctx_save_auto_enable(se_dev);
+ }
+
+ /* Read the context save progress counter: block_count
+ * Ensure no previous context save has been triggered
+ * SE_CTX_SAVE_AUTO.CURR_CNT == 0
+ */
+ if (ret == 0) {
+ val = tegra_se_read_32(se_dev, SE_CTX_SAVE_AUTO_REG_OFFSET);
+ block_count = SE_CTX_SAVE_GET_BLK_COUNT(val);
+ if (block_count != 0U) {
+ ERROR("%s: ctx_save triggered multiple times\n",
+ __func__);
+ ret = -EALREADY;
+ }
+ }
+
+ /* Set the destination block count when the context save complete */
+ if (ret == 0) {
+ blk_count_limit = block_count + se_dev->ctx_size_blks;
+ }
+
+ /* Program SE_CONFIG register as for RNG operation
+ * SE_CONFIG.ENC_ALG = RNG
+ * SE_CONFIG.DEC_ALG = NOP
+ * SE_CONFIG.ENC_MODE is ignored
+ * SE_CONFIG.DEC_MODE is ignored
+ * SE_CONFIG.DST = MEMORY
+ */
+ if (ret == 0) {
+ val = (SE_CONFIG_ENC_ALG_RNG |
+ SE_CONFIG_DEC_ALG_NOP |
+ SE_CONFIG_DST_MEMORY);
+ tegra_se_write_32(se_dev, SE_CONFIG_REG_OFFSET, val);
+
+ tegra_se_make_data_coherent(se_dev);
+
+ /* SE_CTX_SAVE operation */
+ tegra_se_write_32(se_dev, SE_OPERATION_REG_OFFSET,
+ SE_OP_CTX_SAVE);
+
+ ret = tegra_se_context_save_complete(se_dev);
+ }
+
+ /* Check that context has written the correct number of blocks */
+ if (ret == 0) {
+ val = tegra_se_read_32(se_dev, SE_CTX_SAVE_AUTO_REG_OFFSET);
+ if (SE_CTX_SAVE_GET_BLK_COUNT(val) != blk_count_limit) {
+ ERROR("%s: expected %d blocks but %d were written\n",
+ __func__, blk_count_limit, val);
+ ret = -ECANCELED;
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * Initialize the SE engine handle
+ */
+void tegra_se_init(void)
+{
+ INFO("%s: start SE init\n", __func__);
+
+ /* TODO: Bug 1854340. Generate random SRK */
+
+ INFO("%s: SE init done\n", __func__);
+}
+
+/*
+ * Security engine power suspend entry point.
+ * This function is invoked from PSCI power domain suspend handler.
+ */
+int32_t tegra_se_suspend(void)
+{
+ int32_t ret = 0;
+
+ /* Atomic context save se2 and pka1 */
+ INFO("%s: SE2/PKA1 atomic context save\n", __func__);
+ ret = tegra_se_context_save_atomic(&se_dev_2);
+
+ /* Atomic context save se */
+ if (ret == 0) {
+ INFO("%s: SE1 atomic context save\n", __func__);
+ ret = tegra_se_context_save_atomic(&se_dev_1);
+ }
+
+ if (ret == 0) {
+ INFO("%s: SE atomic context save done\n", __func__);
+ }
+
+ return ret;
+}
+
+/*
+ * Save TZRAM to shadow TZRAM in AON
+ */
+int32_t tegra_se_save_tzram(void)
+{
+ uint32_t val = 0;
+ int32_t ret = 0;
+ uint32_t timeout;
+
+ INFO("%s: SE TZRAM save start\n", __func__);
+
+ val = (SE_TZRAM_OP_REQ_INIT | SE_TZRAM_OP_MODE_SAVE);
+ tegra_se_write_32(&se_dev_1, SE_TZRAM_OPERATION, val);
+
+ val = tegra_se_read_32(&se_dev_1, SE_TZRAM_OPERATION);
+ for (timeout = 0; (SE_TZRAM_OP_BUSY(val) == SE_TZRAM_OP_BUSY_ON) &&
+ (timeout < TIMEOUT_100MS); timeout++) {
+ mdelay(1);
+ val = tegra_se_read_32(&se_dev_1, SE_TZRAM_OPERATION);
+ }
+
+ if (timeout == TIMEOUT_100MS) {
+ ERROR("%s: ERR: TZRAM save timeout!\n", __func__);
+ ret = -ETIMEDOUT;
+ }
+
+ if (ret == 0) {
+ INFO("%s: SE TZRAM save done!\n", __func__);
+ }
+
+ return ret;
+}
+
+/*
+ * The function is invoked by SE resume
+ */
+static void tegra_se_warm_boot_resume(const tegra_se_dev_t *se_dev)
+{
+ uint32_t val;
+
+ assert(se_dev);
+
+ /* Lock RNG source to ENTROPY on resume */
+ val = DRBG_RO_ENT_IGNORE_MEM_ENABLE |
+ DRBG_RO_ENT_SRC_LOCK_ENABLE |
+ DRBG_RO_ENT_SRC_ENABLE;
+ tegra_se_write_32(se_dev, SE_RNG_SRC_CONFIG_REG_OFFSET, val);
+
+ /* Enable and lock the SE atomic context save setting */
+ if (tegra_se_ctx_save_auto_enable(se_dev) != 0) {
+ ERROR("%s: ERR: enable SE%d context save auto failed!\n",
+ __func__, se_dev->se_num);
+ }
+
+ /* TODO: Bug 1854340. Set a random value to SRK */
+}
+
+/*
+ * The function is invoked on SC7 resume
+ */
+void tegra_se_resume(void)
+{
+ tegra_se_warm_boot_resume(&se_dev_1);
+ tegra_se_warm_boot_resume(&se_dev_2);
+}
diff --git a/plat/nvidia/tegra/soc/t210/plat_psci_handlers.c b/plat/nvidia/tegra/soc/t210/plat_psci_handlers.c
index 27786d3..bd4beaa 100644
--- a/plat/nvidia/tegra/soc/t210/plat_psci_handlers.c
+++ b/plat/nvidia/tegra/soc/t210/plat_psci_handlers.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -19,6 +19,8 @@
#include <pmc.h>
#include <tegra_def.h>
#include <tegra_private.h>
+#include <tegra_platform.h>
+#include <security_engine.h>
/*
* Register used to clear CPU reset signals. Each CPU has two reset
@@ -120,16 +122,31 @@
unsigned int stateid_afflvl2 = pwr_domain_state[MPIDR_AFFLVL2];
unsigned int stateid_afflvl1 = pwr_domain_state[MPIDR_AFFLVL1];
unsigned int stateid_afflvl0 = pwr_domain_state[MPIDR_AFFLVL0];
+ int ret = PSCI_E_SUCCESS;
if (stateid_afflvl2 == PSTATE_ID_SOC_POWERDN) {
assert((stateid_afflvl0 == PLAT_MAX_OFF_STATE) ||
- (stateid_afflvl0 == PSTATE_ID_SOC_POWERDN));
+ (stateid_afflvl0 == PSTATE_ID_SOC_POWERDN));
assert((stateid_afflvl1 == PLAT_MAX_OFF_STATE) ||
- (stateid_afflvl1 == PSTATE_ID_SOC_POWERDN));
+ (stateid_afflvl1 == PSTATE_ID_SOC_POWERDN));
+
+ if (tegra_chipid_is_t210_b01()) {
+ /* Suspend se/se2 and pka1 */
+ if (tegra_se_suspend() != 0) {
+ ret = PSCI_E_INTERN_FAIL;
+ }
+
+ /* Save tzram contents */
+ if (tegra_se_save_tzram() != 0) {
+ ret = PSCI_E_INTERN_FAIL;
+ }
+ }
/* suspend the entire soc */
- tegra_fc_soc_powerdn(mpidr);
+ if (ret == PSCI_E_SUCCESS) {
+ tegra_fc_soc_powerdn(mpidr);
+ }
} else if (stateid_afflvl1 == PSTATE_ID_CLUSTER_IDLE) {
@@ -152,10 +169,10 @@
} else {
ERROR("%s: Unknown state id\n", __func__);
- return PSCI_E_NOT_SUPPORTED;
+ ret = PSCI_E_NOT_SUPPORTED;
}
- return PSCI_E_SUCCESS;
+ return ret;
}
int tegra_soc_pwr_domain_on_finish(const psci_power_state_t *target_state)
@@ -169,6 +186,13 @@
PLAT_SYS_SUSPEND_STATE_ID) {
/*
+ * Security engine resume
+ */
+ if (tegra_chipid_is_t210_b01()) {
+ tegra_se_resume();
+ }
+
+ /*
* Lock scratch registers which hold the CPU vectors
*/
tegra_pmc_lock_cpu_vectors();
@@ -231,7 +255,7 @@
* for the PMC APB clock would not be changed due to system reset.
*/
mmio_write_32((uintptr_t)TEGRA_CAR_RESET_BASE + SCLK_BURST_POLICY,
- SCLK_BURST_POLICY_DEFAULT);
+ SCLK_BURST_POLICY_DEFAULT);
mmio_write_32((uintptr_t)TEGRA_CAR_RESET_BASE + SCLK_RATE, 0);
/* Wait 1 ms to make sure clock source/device logic is stabilized. */
diff --git a/plat/nvidia/tegra/soc/t210/plat_setup.c b/plat/nvidia/tegra/soc/t210/plat_setup.c
index 7841f84..0c2fe96 100644
--- a/plat/nvidia/tegra/soc/t210/plat_setup.c
+++ b/plat/nvidia/tegra/soc/t210/plat_setup.c
@@ -9,7 +9,9 @@
#include <drivers/console.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
#include <platform.h>
+#include <security_engine.h>
#include <tegra_def.h>
+#include <tegra_platform.h>
#include <tegra_private.h>
/* sets of MMIO ranges setup */
@@ -36,6 +38,14 @@
******************************************************************************/
const mmap_region_t *plat_get_mmio_map(void)
{
+ /* Add the map region for security engine SE2 */
+ if (tegra_chipid_is_t210_b01()) {
+ mmap_add_region((uint64_t)TEGRA_SE2_BASE,
+ (uint64_t)TEGRA_SE2_BASE,
+ (uint64_t)TEGRA_SE2_RANGE_SIZE,
+ MT_DEVICE | MT_RW | MT_SECURE);
+ }
+
/* MMIO space */
return tegra_mmap;
}
@@ -102,6 +112,17 @@
}
/*******************************************************************************
+ * Handler for early platform setup
+ ******************************************************************************/
+void plat_early_platform_setup(void)
+{
+ /* Initialize security engine driver */
+ if (tegra_chipid_is_t210_b01()) {
+ tegra_se_init();
+ }
+}
+
+/*******************************************************************************
* Initialize the GIC and SGIs
******************************************************************************/
void plat_gic_setup(void)
diff --git a/plat/nvidia/tegra/soc/t210/platform_t210.mk b/plat/nvidia/tegra/soc/t210/platform_t210.mk
index b0a474c..3cc71b2 100644
--- a/plat/nvidia/tegra/soc/t210/platform_t210.mk
+++ b/plat/nvidia/tegra/soc/t210/platform_t210.mk
@@ -16,18 +16,21 @@
PLATFORM_MAX_CPUS_PER_CLUSTER := 4
$(eval $(call add_define,PLATFORM_MAX_CPUS_PER_CLUSTER))
-MAX_XLAT_TABLES := 4
+MAX_XLAT_TABLES := 8
$(eval $(call add_define,MAX_XLAT_TABLES))
MAX_MMAP_REGIONS := 8
$(eval $(call add_define,MAX_MMAP_REGIONS))
+PLAT_INCLUDES += -I${SOC_DIR}/drivers/se
+
BL31_SOURCES += lib/cpus/aarch64/cortex_a53.S \
lib/cpus/aarch64/cortex_a57.S \
${COMMON_DIR}/drivers/flowctrl/flowctrl.c \
${COMMON_DIR}/drivers/memctrl/memctrl_v1.c \
${SOC_DIR}/plat_psci_handlers.c \
${SOC_DIR}/plat_setup.c \
+ ${SOC_DIR}/drivers/se/security_engine.c \
${SOC_DIR}/plat_secondary.c
# Enable workarounds for selected Cortex-A57 erratas.