diff --git a/.checkpatch.conf b/.checkpatch.conf
index 0c84fcd..e92b96f 100644
--- a/.checkpatch.conf
+++ b/.checkpatch.conf
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
@@ -48,6 +48,10 @@
 #      drivers/arm/gic/arm_gic.c:160:
 --showfile
 
+# Don't show some messages like the list of ignored types or the suggestion to
+# use "--fix" or report changes to the maintainers.
+--quiet
+
 #
 # Ignore the following message types, as they don't necessarily make sense in
 # the context of the Trusted Firmware.
@@ -78,6 +82,9 @@
 # We allow adding new typedefs in TF.
 --ignore NEW_TYPEDEFS
 
+# Avoid "Does not appear to be a unified-diff format patch" message
+--ignore NOT_UNIFIED_DIFF
+
 # VOLATILE reports this kind of messages:
 # "Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt"
 # We allow the usage of the volatile keyword in TF.
diff --git a/Makefile b/Makefile
index aa71ee3..73566c0 100644
--- a/Makefile
+++ b/Makefile
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@@ -193,6 +193,7 @@
 				lib/${ARCH}/cache_helpers.S		\
 				lib/${ARCH}/misc_helpers.S		\
 				plat/common/plat_log_common.c		\
+				plat/common/platform_helpers_default.c	\
 				plat/common/${ARCH}/plat_common.c	\
 				plat/common/${ARCH}/platform_helpers.S	\
 				${COMPILER_RT_SRCS}			\
@@ -598,38 +599,39 @@
 FIP_BL2_ARGS := tb-fw
 endif
 
-$(if ${BL2}, $(eval $(call MAKE_TOOL_ARGS,2,${BL2},${FIP_BL2_ARGS})),\
+$(if ${BL2}, $(eval $(call TOOL_ADD_IMG,bl2,--${FIP_BL2_ARGS})),\
 	$(eval $(call MAKE_BL,2,${FIP_BL2_ARGS})))
 endif
 
 ifeq (${NEED_SCP_BL2},yes)
-$(eval $(call FIP_ADD_IMG,SCP_BL2,--scp-fw))
+$(eval $(call TOOL_ADD_IMG,scp_bl2,--scp-fw))
 endif
 
 ifeq (${NEED_BL31},yes)
 BL31_SOURCES += ${SPD_SOURCES}
-$(if ${BL31}, $(eval $(call MAKE_TOOL_ARGS,31,${BL31},soc-fw)),\
+$(if ${BL31}, $(eval $(call TOOL_ADD_IMG,bl31,--soc-fw)),\
 	$(eval $(call MAKE_BL,31,soc-fw)))
 endif
 
 # If a BL32 image is needed but neither BL32 nor BL32_SOURCES is defined, the
-# build system will call FIP_ADD_IMG to print a warning message and abort the
+# build system will call TOOL_ADD_IMG to print a warning message and abort the
 # process. Note that the dependency on BL32 applies to the FIP only.
 ifeq (${NEED_BL32},yes)
-$(if ${BL32}, $(eval $(call MAKE_TOOL_ARGS,32,${BL32},tos-fw)),\
-	$(if ${BL32_SOURCES}, $(eval $(call MAKE_BL,32,tos-fw)),\
-		$(eval $(call FIP_ADD_IMG,BL32,--tos-fw))))
+
+BUILD_BL32 := $(if $(BL32),,$(if $(BL32_SOURCES),1))
+
+$(if ${BUILD_BL32}, $(eval $(call MAKE_BL,32,tos-fw)),\
+	$(eval $(call TOOL_ADD_IMG,bl32,--tos-fw)))
 endif
 
 # Add the BL33 image if required by the platform
 ifeq (${NEED_BL33},yes)
-$(eval $(call FIP_ADD_IMG,BL33,--nt-fw))
+$(eval $(call TOOL_ADD_IMG,bl33,--nt-fw))
 endif
 
 ifeq (${NEED_BL2U},yes)
-BL2U_PATH	:= $(if ${BL2U},${BL2U},$(call IMG_BIN,2u))
-$(if ${BL2U}, ,$(eval $(call MAKE_BL,2u)))
-$(eval $(call FWU_FIP_ADD_PAYLOAD,${BL2U_PATH},--ap-fwu-cfg))
+$(if ${BL2U}, $(eval $(call TOOL_ADD_IMG,bl2u,--ap-fwu-cfg,FWU_)),\
+	$(eval $(call MAKE_BL,2u,ap-fwu-cfg,FWU_)))
 endif
 
 # Expand build macros for the different images
@@ -680,7 +682,14 @@
 
 checkpatch:		locate-checkpatch
 	@echo "  CHECKING STYLE"
-	${Q}git format-patch --stdout ${BASE_COMMIT}..HEAD -- ${CHECK_PATHS} | ${CHECKPATCH} - || true
+	${Q}COMMON_COMMIT=$$(git merge-base HEAD ${BASE_COMMIT});	\
+	for commit in `git rev-list $$COMMON_COMMIT..HEAD`; do		\
+		printf "\n[*] Checking style of '$$commit'\n\n";	\
+		git log --format=email "$$commit~..$$commit"		\
+			-- ${CHECK_PATHS} | ${CHECKPATCH} - || true;	\
+		git diff --format=email "$$commit~..$$commit"		\
+			-- ${CHECK_PATHS} | ${CHECKPATCH} - || true;	\
+	done
 
 certtool: ${CRTTOOL}
 
diff --git a/bl1/aarch32/bl1_exceptions.S b/bl1/aarch32/bl1_exceptions.S
index f73db40..a1e32f0 100644
--- a/bl1/aarch32/bl1_exceptions.S
+++ b/bl1/aarch32/bl1_exceptions.S
@@ -73,6 +73,11 @@
 	ldr	r1, [r8, #(ENTRY_POINT_INFO_PC_OFFSET + 4)]
 	msr	spsr, r1
 
+	/* Some BL32 stages expect lr_svc to provide the BL33 entry address */
+	cps	#MODE32_svc
+	ldr	lr, [r8, #ENTRY_POINT_INFO_LR_SVC_OFFSET]
+	cps	#MODE32_mon
+
 	add	r8, r8, #ENTRY_POINT_INFO_ARGS_OFFSET
 	ldm	r8, {r0, r1, r2, r3}
 	eret
diff --git a/bl1/bl1_main.c b/bl1/bl1_main.c
index 821b6a3..91b5f0b 100644
--- a/bl1/bl1_main.c
+++ b/bl1/bl1_main.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -178,6 +178,12 @@
 	INFO("BL1: Loading BL2\n");
 
 #if LOAD_IMAGE_V2
+	err = bl1_plat_handle_pre_image_load();
+	if (err) {
+		ERROR("Failure in pre image load handling of BL2 (%d)\n", err);
+		plat_error_handler(err);
+	}
+
 	err = load_auth_image(BL2_IMAGE_ID, image_info);
 #else
 	/* Load the BL2 image */
@@ -194,6 +200,14 @@
 		plat_error_handler(err);
 	}
 
+#if LOAD_IMAGE_V2
+	/* Allow platform to handle image information. */
+	err = bl1_plat_handle_post_image_load();
+	if (err) {
+		ERROR("Failure in post image load handling of BL2 (%d)\n", err);
+		plat_error_handler(err);
+	}
+
 	/*
 	 * Create a new layout of memory for BL2 as seen by BL1 i.e.
 	 * tell it the amount of total and free memory available.
@@ -201,7 +215,6 @@
 	 * to BL2. BL2 will read the memory layout before using its
 	 * memory for other purposes.
 	 */
-#if LOAD_IMAGE_V2
 	bl2_tzram_layout = (meminfo_t *) bl1_tzram_layout->total_base;
 #else
 	bl2_tzram_layout = (meminfo_t *) bl1_tzram_layout->free_base;
diff --git a/bl2/bl2_image_load_v2.c b/bl2/bl2_image_load_v2.c
index 6517703..f51dea8 100644
--- a/bl2/bl2_image_load_v2.c
+++ b/bl2/bl2_image_load_v2.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -54,6 +54,12 @@
 			}
 		}
 
+		err = bl2_plat_handle_pre_image_load(bl2_node_info->image_id);
+		if (err) {
+			ERROR("BL2: Failure in pre image load handling (%i)\n", err);
+			plat_error_handler(err);
+		}
+
 		if (!(bl2_node_info->image_info->h.attr & IMAGE_ATTRIB_SKIP_LOADING)) {
 			INFO("BL2: Loading image id %d\n", bl2_node_info->image_id);
 			err = load_auth_image(bl2_node_info->image_id,
@@ -87,8 +93,10 @@
 	assert(bl2_to_next_bl_params->h.version >= VERSION_2);
 	assert(bl2_to_next_bl_params->head->ep_info);
 
-	/* Populate arg0 for the next BL image */
-	bl2_to_next_bl_params->head->ep_info->args.arg0 = (u_register_t)bl2_to_next_bl_params;
+	/* Populate arg0 for the next BL image if not already provided */
+	if (bl2_to_next_bl_params->head->ep_info->args.arg0 == (u_register_t)0)
+		bl2_to_next_bl_params->head->ep_info->args.arg0 =
+					(u_register_t)bl2_to_next_bl_params;
 
 	/* Flush the parameters to be passed to next image */
 	plat_flush_next_bl_params();
diff --git a/bl31/aarch64/runtime_exceptions.S b/bl31/aarch64/runtime_exceptions.S
index 9b7735f..57c065c 100644
--- a/bl31/aarch64/runtime_exceptions.S
+++ b/bl31/aarch64/runtime_exceptions.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -153,7 +153,14 @@
 	.endm
 
 
-	.macro save_x18_to_x29_sp_el0
+	.macro save_x4_to_x29_sp_el0
+	stp	x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4]
+	stp	x6, x7, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X6]
+	stp	x8, x9, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X8]
+	stp	x10, x11, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X10]
+	stp	x12, x13, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X12]
+	stp	x14, x15, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X14]
+	stp	x16, x17, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X16]
 	stp	x18, x19, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X18]
 	stp	x20, x21, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X20]
 	stp	x22, x23, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X22]
@@ -297,34 +304,16 @@
 	/* Check whether aarch32 issued an SMC64 */
 	tbnz	x0, #FUNCID_CC_SHIFT, smc_prohibited
 
-	/*
-	 * Since we're are coming from aarch32, x8-x18 need to be saved as per
-	 * SMC32 calling convention. If a lower EL in aarch64 is making an
-	 * SMC32 call then it must have saved x8-x17 already therein.
-	 */
-	stp	x8, x9, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X8]
-	stp	x10, x11, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X10]
-	stp	x12, x13, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X12]
-	stp	x14, x15, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X14]
-	stp	x16, x17, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X16]
-
-	/* x4-x7, x18, sp_el0 are saved below */
-
 smc_handler64:
 	/*
 	 * Populate the parameters for the SMC handler.
 	 * We already have x0-x4 in place. x5 will point to a cookie (not used
 	 * now). x6 will point to the context structure (SP_EL3) and x7 will
-	 * contain flags we need to pass to the handler Hence save x5-x7.
+	 * contain flags we need to pass to the handler.
 	 *
-	 * Note: x4 only needs to be preserved for AArch32 callers but we do it
-	 *       for AArch64 callers as well for convenience
+	 * Save x4-x29 and sp_el0.  Refer to SMCCC v1.1.
 	 */
-	stp	x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4]
-	stp	x6, x7, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X6]
-
-	/* Save rest of the gpregs and sp_el0*/
-	save_x18_to_x29_sp_el0
+	save_x4_to_x29_sp_el0
 
 	mov	x5, xzr
 	mov	x6, sp
diff --git a/bl31/bl31.mk b/bl31/bl31.mk
index 2db4856..886d301 100644
--- a/bl31/bl31.mk
+++ b/bl31/bl31.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@@ -23,6 +23,7 @@
 				bl31/bl31_context_mgmt.c			\
 				common/runtime_svc.c				\
 				plat/common/aarch64/platform_mp_stack.S		\
+				services/arm_arch_svc/arm_arch_svc_setup.c	\
 				services/std_svc/std_svc_setup.c		\
 				${PSCI_LIB_SOURCES}				\
 				${SPM_SOURCES}					\
diff --git a/bl32/optee/optee.mk b/bl32/optee/optee.mk
new file mode 100644
index 0000000..462020f
--- /dev/null
+++ b/bl32/optee/optee.mk
@@ -0,0 +1,15 @@
+#
+# Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+# This makefile only aims at complying with ARM Trusted Firmware build process so
+# that "optee" is a valid ARM Trusted Firmware AArch32 Secure Playload identifier.
+
+ifneq ($(ARCH),aarch32)
+$(error This directory targets AArch32 support)
+endif
+
+$(eval $(call add_define,AARCH32_SP_OPTEE))
+
+$(info ARM Trusted Firmware built for OP-TEE payload support)
diff --git a/bl32/sp_min/sp_min.mk b/bl32/sp_min/sp_min.mk
index 67a1981..145820e 100644
--- a/bl32/sp_min/sp_min.mk
+++ b/bl32/sp_min/sp_min.mk
@@ -23,7 +23,8 @@
 endif
 
 ifeq (${ENABLE_AMU}, 1)
-BL32_SOURCES		+=	lib/extensions/amu/aarch32/amu.c
+BL32_SOURCES		+=	lib/extensions/amu/aarch32/amu.c\
+				lib/extensions/amu/aarch32/amu_helpers.S
 endif
 
 ifeq (${WORKAROUND_CVE_2017_5715},1)
diff --git a/common/image_decompress.c b/common/image_decompress.c
new file mode 100644
index 0000000..7bd02b1
--- /dev/null
+++ b/common/image_decompress.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <debug.h>
+#include <image_decompress.h>
+#include <stdint.h>
+
+static uintptr_t decompressor_buf_base;
+static uint32_t decompressor_buf_size;
+static decompressor_t *decompressor;
+static struct image_info saved_image_info;
+
+void image_decompress_init(uintptr_t buf_base, uint32_t buf_size,
+			   decompressor_t *_decompressor)
+{
+	decompressor_buf_base = buf_base;
+	decompressor_buf_size = buf_size;
+	decompressor = _decompressor;
+}
+
+void image_decompress_prepare(struct image_info *info)
+{
+	/*
+	 * If the image is compressed, it should be loaded into the temporary
+	 * buffer instead of its final destination.  We save image_info, then
+	 * override ->image_base and ->image_max_size so that load_image() will
+	 * transfer the compressed data to the temporary buffer.
+	 */
+	saved_image_info = *info;
+	info->image_base = decompressor_buf_base;
+	info->image_max_size = decompressor_buf_size;
+}
+
+int image_decompress(struct image_info *info)
+{
+	uintptr_t compressed_image_base, image_base, work_base;
+	uint32_t compressed_image_size, work_size;
+	int ret;
+
+	/*
+	 * The size of compressed data has been filled by load_image().
+	 * Read it out before restoring image_info.
+	 */
+	compressed_image_size = info->image_size;
+	compressed_image_base = info->image_base;
+	*info = saved_image_info;
+
+	assert(compressed_image_size <= decompressor_buf_size);
+
+	image_base = info->image_base;
+
+	/*
+	 * Use the rest of the temporary buffer as workspace of the
+	 * decompressor since the decompressor may need additional memory.
+	 */
+	work_base = compressed_image_base + compressed_image_size;
+	work_size = decompressor_buf_size - compressed_image_size;
+
+	ret = decompressor(&compressed_image_base, compressed_image_size,
+			   &image_base, info->image_max_size,
+			   work_base, work_size);
+	if (ret) {
+		ERROR("Failed to decompress image (err=%d)\n", ret);
+		return ret;
+	}
+
+	/* image_base is updated to the final pos when decompressor() exits. */
+	info->image_size = image_base - info->image_base;
+
+	flush_dcache_range(info->image_base, info->image_size);
+
+	return 0;
+}
diff --git a/docs/porting-guide.rst b/docs/porting-guide.rst
index 7683ded..de05e03 100644
--- a/docs/porting-guide.rst
+++ b/docs/porting-guide.rst
@@ -1259,6 +1259,30 @@
 the firmware update images defined in the Trusted Board Boot Requirements
 specification.
 
+Function : bl1\_plat\_handle\_pre\_image\_load() [optional]
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+::
+
+    Argument : void
+    Return   : int
+
+This function can be used by the platforms to update/use image information
+for BL2. This function is currently invoked in BL1 before loading BL2,
+when LOAD\_IMAGE\_V2 is enabled.
+
+Function : bl1\_plat\_handle\_post\_image\_load() [optional]
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+::
+
+    Argument : void
+    Return   : int
+
+This function can be used by the platforms to update/use image information
+for BL2. This function is currently invoked in BL1 after loading BL2,
+when LOAD\_IMAGE\_V2 is enabled.
+
 Function : bl1\_plat\_fwu\_done() [optional]
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -1424,10 +1448,22 @@
 populated with the extents of secure RAM available for BL2 to use. See
 ``bl2_early_platform_setup()`` above.
 
+Following functions are optionally used only when LOAD\_IMAGE\_V2 is enabled.
+
+Function : bl2\_plat\_handle\_pre\_image\_load() [optional]
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
-Following function is required only when LOAD\_IMAGE\_V2 is enabled.
+::
+
+    Argument : unsigned int
+    Return   : int
+
+This function can be used by the platforms to update/use image information
+for given ``image_id``. This function is currently invoked in BL2 before
+loading each image, when LOAD\_IMAGE\_V2 is enabled.
 
-Function : bl2\_plat\_handle\_post\_image\_load() [mandatory]
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Function : bl2\_plat\_handle\_post\_image\_load() [optional]
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 ::
 
@@ -1435,9 +1471,8 @@
     Return   : int
 
 This function can be used by the platforms to update/use image information
-for given ``image_id``. This function is currently invoked in BL2 to handle
-BL image specific information based on the ``image_id`` passed, when
-LOAD\_IMAGE\_V2 is enabled.
+for given ``image_id``. This function is currently invoked in BL2 after
+loading each image, when LOAD\_IMAGE\_V2 is enabled.
 
 Following functions are required only when LOAD\_IMAGE\_V2 is disabled.
 
diff --git a/drivers/arm/gic/v3/arm_gicv3_common.c b/drivers/arm/gic/v3/arm_gicv3_common.c
index 8d552ca..c809732 100644
--- a/drivers/arm/gic/v3/arm_gicv3_common.c
+++ b/drivers/arm/gic/v3/arm_gicv3_common.c
@@ -84,6 +84,15 @@
 	assert(gicr_base);
 
 	/*
+	 * If the GIC had power removed, the GICR_WAKER state will be reset.
+	 * Since the GICR_WAKER.Sleep and GICR_WAKER.Quiescent bits are cleared,
+	 * we can exit early. This also prevents the following assert from
+	 * erroneously triggering.
+	 */
+	if (!(gicr_read_waker(gicr_base) & WAKER_SL_BIT))
+		return;
+
+	/*
 	 * Writes to GICR_WAKER.Sleep bit are ignored if GICR_WAKER.Quiescent
 	 * bit is not set. We should be alright on power on path, therefore
 	 * coming out of sleep and Quiescent should be set, but we assert in
diff --git a/include/common/ep_info.h b/include/common/ep_info.h
index 3f6213f..3c2fe44 100644
--- a/include/common/ep_info.h
+++ b/include/common/ep_info.h
@@ -20,7 +20,8 @@
  ******************************************************************************/
 #define ENTRY_POINT_INFO_PC_OFFSET	U(0x08)
 #ifdef AARCH32
-#define ENTRY_POINT_INFO_ARGS_OFFSET	U(0x10)
+#define ENTRY_POINT_INFO_LR_SVC_OFFSET	U(0x10)
+#define ENTRY_POINT_INFO_ARGS_OFFSET	U(0x14)
 #else
 #define ENTRY_POINT_INFO_ARGS_OFFSET	U(0x18)
 #endif
@@ -93,6 +94,7 @@
 	uintptr_t pc;
 	uint32_t spsr;
 #ifdef AARCH32
+	uintptr_t lr_svc;
 	aapcs32_params_t args;
 #else
 	aapcs64_params_t args;
@@ -108,6 +110,12 @@
 		__builtin_offsetof(entry_point_info_t, pc), \
 		assert_BL31_pc_offset_mismatch);
 
+#ifdef AARCH32
+CASSERT(ENTRY_POINT_INFO_LR_SVC_OFFSET ==
+		__builtin_offsetof(entry_point_info_t, lr_svc),
+		assert_entrypoint_lr_offset_error);
+#endif
+
 CASSERT(ENTRY_POINT_INFO_ARGS_OFFSET == \
 		__builtin_offsetof(entry_point_info_t, args), \
 		assert_BL31_args_offset_mismatch);
diff --git a/include/common/image_decompress.h b/include/common/image_decompress.h
new file mode 100644
index 0000000..aed8df3
--- /dev/null
+++ b/include/common/image_decompress.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __IMAGE_DECOMPRESS_H__
+#define __IMAGE_DECOMPRESS_H__
+
+#include <stddef.h>
+#include <stdint.h>
+
+struct image_info;
+
+typedef int (decompressor_t)(uintptr_t *in_buf, size_t in_len,
+			     uintptr_t *out_buf, size_t out_len,
+			     uintptr_t work_buf, size_t work_len);
+
+void image_decompress_init(uintptr_t buf_base, uint32_t buf_size,
+			   decompressor_t *decompressor);
+void image_decompress_prepare(struct image_info *info);
+int image_decompress(struct image_info *info);
+
+#endif /* __IMAGE_DECOMPRESS_H___ */
diff --git a/include/lib/aarch32/arch.h b/include/lib/aarch32/arch.h
index 134d534..3624cc6 100644
--- a/include/lib/aarch32/arch.h
+++ b/include/lib/aarch32/arch.h
@@ -544,7 +544,7 @@
 #define AMCNTENCLR0	p15, 0, c13, c2, 4
 #define AMCNTENSET0	p15, 0, c13, c2, 5
 #define AMCNTENCLR1	p15, 0, c13, c3, 0
-#define AMCNTENSET1	p15, 0, c13, c1, 1
+#define AMCNTENSET1	p15, 0, c13, c3, 1
 
 /* Activity Monitor Group 0 Event Counter Registers */
 #define AMEVCNTR00	p15, 0, c0
@@ -558,4 +558,40 @@
 #define AMEVTYPER02	p15, 0, c13, c6, 2
 #define AMEVTYPER03	p15, 0, c13, c6, 3
 
+/* Activity Monitor Group 1 Event Counter Registers */
+#define AMEVCNTR10	p15, 0, c4
+#define AMEVCNTR11	p15, 1, c4
+#define AMEVCNTR12	p15, 2, c4
+#define AMEVCNTR13	p15, 3, c4
+#define AMEVCNTR14	p15, 4, c4
+#define AMEVCNTR15	p15, 5, c4
+#define AMEVCNTR16	p15, 6, c4
+#define AMEVCNTR17	p15, 7, c4
+#define AMEVCNTR18	p15, 0, c5
+#define AMEVCNTR19	p15, 1, c5
+#define AMEVCNTR1A	p15, 2, c5
+#define AMEVCNTR1B	p15, 3, c5
+#define AMEVCNTR1C	p15, 4, c5
+#define AMEVCNTR1D	p15, 5, c5
+#define AMEVCNTR1E	p15, 6, c5
+#define AMEVCNTR1F	p15, 7, c5
+
+/* Activity Monitor Group 1 Event Type Registers */
+#define AMEVTYPER10	p15, 0, c13, c14, 0
+#define AMEVTYPER11	p15, 0, c13, c14, 1
+#define AMEVTYPER12	p15, 0, c13, c14, 2
+#define AMEVTYPER13	p15, 0, c13, c14, 3
+#define AMEVTYPER14	p15, 0, c13, c14, 4
+#define AMEVTYPER15	p15, 0, c13, c14, 5
+#define AMEVTYPER16	p15, 0, c13, c14, 6
+#define AMEVTYPER17	p15, 0, c13, c14, 7
+#define AMEVTYPER18	p15, 0, c13, c15, 0
+#define AMEVTYPER19	p15, 0, c13, c15, 1
+#define AMEVTYPER1A	p15, 0, c13, c15, 2
+#define AMEVTYPER1B	p15, 0, c13, c15, 3
+#define AMEVTYPER1C	p15, 0, c13, c15, 4
+#define AMEVTYPER1D	p15, 0, c13, c15, 5
+#define AMEVTYPER1E	p15, 0, c13, c15, 6
+#define AMEVTYPER1F	p15, 0, c13, c15, 7
+
 #endif /* __ARCH_H__ */
diff --git a/include/lib/el3_runtime/aarch64/context.h b/include/lib/el3_runtime/aarch64/context.h
index 5e212ec..5f6bdc9 100644
--- a/include/lib/el3_runtime/aarch64/context.h
+++ b/include/lib/el3_runtime/aarch64/context.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -46,26 +46,12 @@
 #define CTX_GPREG_SP_EL0	U(0xf8)
 #define CTX_GPREGS_END		U(0x100)
 
-#if WORKAROUND_CVE_2017_5715
-#define CTX_CVE_2017_5715_OFFSET	(CTX_GPREGS_OFFSET + CTX_GPREGS_END)
-#define CTX_CVE_2017_5715_QUAD0		U(0x0)
-#define CTX_CVE_2017_5715_QUAD1		U(0x8)
-#define	CTX_CVE_2017_5715_QUAD2		U(0x10)
-#define CTX_CVE_2017_5715_QUAD3		U(0x18)
-#define CTX_CVE_2017_5715_QUAD4		U(0x20)
-#define CTX_CVE_2017_5715_QUAD5		U(0x28)
-#define CTX_CVE_2017_5715_END		U(0x30)
-#else
-#define CTX_CVE_2017_5715_OFFSET	CTX_GPREGS_OFFSET
-#define CTX_CVE_2017_5715_END		CTX_GPREGS_END
-#endif
-
 /*******************************************************************************
  * Constants that allow assembler code to access members of and the 'el3_state'
  * structure at their correct offsets. Note that some of the registers are only
  * 32-bits wide but are stored as 64-bit values for convenience
  ******************************************************************************/
-#define CTX_EL3STATE_OFFSET	(CTX_CVE_2017_5715_OFFSET + CTX_CVE_2017_5715_END)
+#define CTX_EL3STATE_OFFSET	(CTX_GPREGS_OFFSET + CTX_GPREGS_END)
 #define CTX_SCR_EL3		U(0x0)
 #define CTX_RUNTIME_SP		U(0x8)
 #define CTX_SPSR_EL3		U(0x10)
@@ -200,9 +186,6 @@
 
 /* Constants to determine the size of individual context structures */
 #define CTX_GPREG_ALL		(CTX_GPREGS_END >> DWORD_SHIFT)
-#if WORKAROUND_CVE_2017_5715
-#define CTX_CVE_2017_5715_ALL	(CTX_CVE_2017_5715_END >> DWORD_SHIFT)
-#endif
 #define CTX_SYSREG_ALL		(CTX_SYSREGS_END >> DWORD_SHIFT)
 #if CTX_INCLUDE_FPREGS
 #define CTX_FPREG_ALL		(CTX_FPREGS_END >> DWORD_SHIFT)
@@ -218,10 +201,6 @@
  */
 DEFINE_REG_STRUCT(gp_regs, CTX_GPREG_ALL);
 
-#if WORKAROUND_CVE_2017_5715
-DEFINE_REG_STRUCT(cve_2017_5715_regs, CTX_CVE_2017_5715_ALL);
-#endif
-
 /*
  * AArch64 EL1 system register context structure for preserving the
  * architectural state during switches from one security state to
@@ -263,9 +242,6 @@
  */
 typedef struct cpu_context {
 	gp_regs_t gpregs_ctx;
-#if WORKAROUND_CVE_2017_5715
-	cve_2017_5715_regs_t cve_2017_5715_regs_ctx;
-#endif
 	el3_state_t el3state_ctx;
 	el1_sys_regs_t sysregs_ctx;
 #if CTX_INCLUDE_FPREGS
diff --git a/include/lib/extensions/amu.h b/include/lib/extensions/amu.h
index faa0ee1..559c8f1 100644
--- a/include/lib/extensions/amu.h
+++ b/include/lib/extensions/amu.h
@@ -7,10 +7,10 @@
 #ifndef __AMU_H__
 #define __AMU_H__
 
-#include <sys/cdefs.h> /* for CASSERT() */
 #include <cassert.h>
 #include <platform_def.h>
 #include <stdint.h>
+#include <sys/cdefs.h> /* for CASSERT() */
 
 /* All group 0 counters */
 #define AMU_GROUP0_COUNTERS_MASK	0xf
diff --git a/include/lib/smcc.h b/include/lib/smcc.h
index 13b1e7a..a273b3a 100644
--- a/include/lib/smcc.h
+++ b/include/lib/smcc.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -67,6 +67,11 @@
 #include <cassert.h>
 #include <stdint.h>
 
+#define SMCCC_MAJOR_VERSION U(1)
+#define SMCCC_MINOR_VERSION U(1)
+
+#define MAKE_SMCCC_VERSION(_major, _minor) (((_major) << 16) | (_minor))
+
 /* Various flags passed to SMC handlers */
 #define SMC_FROM_SECURE		(U(0) << 0)
 #define SMC_FROM_NON_SECURE	(U(1) << 0)
@@ -78,6 +83,10 @@
 #define is_std_svc_call(_fid)		((((_fid) >> FUNCID_OEN_SHIFT) & \
 					   FUNCID_OEN_MASK) == OEN_STD_START)
 
+/* The macro below is used to identify a Arm Architectural Service SMC call */
+#define is_arm_arch_svc_call(_fid)	((((_fid) >> FUNCID_OEN_SHIFT) & \
+					   FUNCID_OEN_MASK) == OEN_ARM_START)
+
 /* The macro below is used to identify a valid Fast SMC call */
 #define is_valid_fast_smc(_fid)		((!(((_fid) >> 16) & U(0xff))) && \
 					   (GET_SMC_TYPE(_fid) == SMC_TYPE_FAST))
diff --git a/include/lib/zlib/tf_gunzip.h b/include/lib/zlib/tf_gunzip.h
new file mode 100644
index 0000000..46d20eb
--- /dev/null
+++ b/include/lib/zlib/tf_gunzip.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __TF_GUNZIP_H__
+#define __TF_GUNZIP_H__
+
+#include <stddef.h>
+#include <stdint.h>
+
+int gunzip(uintptr_t *in_buf, size_t in_len, uintptr_t *out_buf,
+	   size_t out_len, uintptr_t work_buf, size_t work_len);
+
+#endif /* __TF_GUNZIP_H___ */
diff --git a/include/plat/common/platform.h b/include/plat/common/platform.h
index 0960105..e2f1cfd 100644
--- a/include/plat/common/platform.h
+++ b/include/plat/common/platform.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -155,6 +155,15 @@
  */
 __dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved);
 
+#if LOAD_IMAGE_V2
+/*
+ * This function can be used by the platforms to update/use image
+ * information for BL2.
+ */
+int bl1_plat_handle_pre_image_load(void);
+int bl1_plat_handle_post_image_load(void);
+
+#endif /* LOAD_IMAGE_V2 */
 
 /*******************************************************************************
  * Mandatory BL2 functions
@@ -169,6 +178,7 @@
  * This function can be used by the platforms to update/use image
  * information for given `image_id`.
  */
+int bl2_plat_handle_pre_image_load(unsigned int image_id);
 int bl2_plat_handle_post_image_load(unsigned int image_id);
 
 #else /* LOAD_IMAGE_V2 */
diff --git a/include/services/arm_arch_svc.h b/include/services/arm_arch_svc.h
new file mode 100644
index 0000000..2961601
--- /dev/null
+++ b/include/services/arm_arch_svc.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __ARM_ARCH_SVC_H__
+#define __ARM_ARCH_SVC_H__
+
+#define SMCCC_VERSION			U(0x80000000)
+#define SMCCC_ARCH_FEATURES		U(0x80000001)
+#define SMCCC_ARCH_WORKAROUND_1		U(0x80008000)
+
+#endif /* __ARM_ARCH_SVC_H__ */
diff --git a/lib/cpus/aarch64/cortex_a75_pubsub.c b/lib/cpus/aarch64/cortex_a75_pubsub.c
index c1089a6..a1ffcb0 100644
--- a/lib/cpus/aarch64/cortex_a75_pubsub.c
+++ b/lib/cpus/aarch64/cortex_a75_pubsub.c
@@ -5,8 +5,8 @@
  */
 
 #include <cortex_a75.h>
-#include <pubsub_events.h>
 #include <platform.h>
+#include <pubsub_events.h>
 
 struct amu_ctx {
 	uint64_t cnts[CORTEX_A75_AMU_NR_COUNTERS];
diff --git a/lib/cpus/aarch64/workaround_cve_2017_5715_bpiall.S b/lib/cpus/aarch64/workaround_cve_2017_5715_bpiall.S
index cd29266..cd82497 100644
--- a/lib/cpus/aarch64/workaround_cve_2017_5715_bpiall.S
+++ b/lib/cpus/aarch64/workaround_cve_2017_5715_bpiall.S
@@ -1,20 +1,27 @@
 /*
- * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
 #include <arch.h>
+#include <arm_arch_svc.h>
 #include <asm_macros.S>
 #include <context.h>
 
 	.globl	workaround_bpiall_vbar0_runtime_exceptions
 
 #define EMIT_BPIALL		0xee070fd5
-#define EMIT_MOV_R0_IMM(v)	0xe3a0000##v
 #define EMIT_SMC		0xe1600070
+#define ESR_EL3_A64_SMC0	0x5e000000
 
-	.macro	enter_workaround _stub_name
+	.macro	enter_workaround _from_vector
+	/*
+	 * Save register state to enable a call to AArch32 S-EL1 and return
+	 * Identify the original calling vector in w2 (==_from_vector)
+	 * Use w3-w6 for additional register state preservation while in S-EL1
+	 */
+
 	/* Save GP regs */
 	stp	x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0]
 	stp	x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2]
@@ -32,47 +39,50 @@
 	stp	x26, x27, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X26]
 	stp	x28, x29, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X28]
 
+	/* Identify the original exception vector */
+	mov	w2, \_from_vector
+
-	adr	x4, \_stub_name
+	/* Preserve 32-bit system registers in GP registers through the workaround */
+	mrs	x3, esr_el3
+	mrs	x4, spsr_el3
+	mrs	x5, scr_el3
+	mrs	x6, sctlr_el1
 
 	/*
-	 * Load SPSR_EL3 and VBAR_EL3.  SPSR_EL3 is set up to have
-	 * all interrupts masked in preparation to running the workaround
-	 * stub in S-EL1.  VBAR_EL3 points to the vector table that
-	 * will handle the SMC back from the workaround stub.
+	 * Preserve LR and ELR_EL3 registers in the GP regs context.
+	 * Temporarily use the CTX_GPREG_SP_EL0 slot to preserve ELR_EL3
+	 * through the workaround. This is OK because at this point the
+	 * current state for this context's SP_EL0 is in the live system
+	 * register, which is unmodified by the workaround.
 	 */
-	ldp	x0, x1, [x4, #0]
+	mrs	x7, elr_el3
+	stp	x30, x7, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_LR]
 
 	/*
-	 * Load SCTLR_EL1 and ELR_EL3.  SCTLR_EL1 is configured to disable
-	 * the MMU in S-EL1.  ELR_EL3 points to the appropriate stub in S-EL1.
+	 * Load system registers for entry to S-EL1.
 	 */
-	ldp	x2, x3, [x4, #16]
 
-	mrs	x4, scr_el3
-	mrs	x5, spsr_el3
-	mrs	x6, elr_el3
-	mrs	x7, sctlr_el1
-	mrs	x8, esr_el3
+	/* Mask all interrupts and set AArch32 Supervisor mode */
+	movz	w8, SPSR_MODE32(MODE32_svc, SPSR_T_ARM, SPSR_E_LITTLE, SPSR_AIF_MASK)
+
+	/* Switch EL3 exception vectors while the workaround is executing. */
+	adr	x9, workaround_bpiall_vbar1_runtime_exceptions
+
+	/* Setup SCTLR_EL1 with MMU off and I$ on */
+	ldr	x10, stub_sel1_sctlr
 
-	/* Preserve system registers in the workaround context */
-	stp	x4, x5, [sp, #CTX_CVE_2017_5715_OFFSET + CTX_CVE_2017_5715_QUAD0]
-	stp	x6, x7, [sp, #CTX_CVE_2017_5715_OFFSET + CTX_CVE_2017_5715_QUAD2]
-	stp	x8, x30, [sp, #CTX_CVE_2017_5715_OFFSET + CTX_CVE_2017_5715_QUAD4]
+	/* Land at the S-EL1 workaround stub */
+	adr	x11, aarch32_stub
 
 	/*
 	 * Setting SCR_EL3 to all zeroes means that the NS, RW
 	 * and SMD bits are configured as expected.
 	 */
 	msr	scr_el3, xzr
-
-	/*
-	 * Reload system registers with the crafted values
-	 * in preparation for entry in S-EL1.
-	 */
-	msr	spsr_el3, x0
-	msr	vbar_el3, x1
-	msr	sctlr_el1, x2
-	msr	elr_el3, x3
+	msr	spsr_el3, x8
+	msr	vbar_el3, x9
+	msr	sctlr_el1, x10
+	msr	elr_el3, x11
 
 	eret
 	.endm
@@ -91,76 +101,31 @@
 	 */
 vector_entry workaround_bpiall_vbar0_sync_exception_sp_el0
 	b	sync_exception_sp_el0
+	nop	/* to force 8 byte alignment for the following stub */
+
 	/*
 	 * Since each vector table entry is 128 bytes, we can store the
 	 * stub context in the unused space to minimize memory footprint.
 	 */
-aarch32_stub_smc:
+stub_sel1_sctlr:
+	.quad	SCTLR_AARCH32_EL1_RES1 | SCTLR_I_BIT
+
+aarch32_stub:
 	.word	EMIT_BPIALL
-	.word	EMIT_MOV_R0_IMM(1)
 	.word	EMIT_SMC
-aarch32_stub_ctx_smc:
-	/* Mask all interrupts and set AArch32 Supervisor mode */
-	.quad	(SPSR_AIF_MASK << SPSR_AIF_SHIFT | \
-	         SPSR_M_AARCH32 << SPSR_M_SHIFT | \
-	         MODE32_svc << MODE32_SHIFT)
 
-	/*
-	 * VBAR_EL3 points to vbar1 which is the vector table
-	 * used while the workaround is executing.
-	 */
-	.quad	workaround_bpiall_vbar1_runtime_exceptions
-
-	/* Setup SCTLR_EL1 with MMU off and I$ on */
-	.quad	SCTLR_AARCH32_EL1_RES1 | SCTLR_I_BIT
-
-	/* ELR_EL3 is setup to point to the sync exception stub in AArch32 */
-	.quad	aarch32_stub_smc
 	check_vector_size workaround_bpiall_vbar0_sync_exception_sp_el0
 
 vector_entry workaround_bpiall_vbar0_irq_sp_el0
 	b	irq_sp_el0
-aarch32_stub_irq:
-	.word	EMIT_BPIALL
-	.word	EMIT_MOV_R0_IMM(2)
-	.word	EMIT_SMC
-aarch32_stub_ctx_irq:
-	.quad	(SPSR_AIF_MASK << SPSR_AIF_SHIFT | \
-	         SPSR_M_AARCH32 << SPSR_M_SHIFT | \
-	         MODE32_svc << MODE32_SHIFT)
-	.quad	workaround_bpiall_vbar1_runtime_exceptions
-	.quad	SCTLR_AARCH32_EL1_RES1 | SCTLR_I_BIT
-	.quad	aarch32_stub_irq
 	check_vector_size workaround_bpiall_vbar0_irq_sp_el0
 
 vector_entry workaround_bpiall_vbar0_fiq_sp_el0
 	b	fiq_sp_el0
-aarch32_stub_fiq:
-	.word	EMIT_BPIALL
-	.word	EMIT_MOV_R0_IMM(4)
-	.word	EMIT_SMC
-aarch32_stub_ctx_fiq:
-	.quad	(SPSR_AIF_MASK << SPSR_AIF_SHIFT | \
-	         SPSR_M_AARCH32 << SPSR_M_SHIFT | \
-	         MODE32_svc << MODE32_SHIFT)
-	.quad	workaround_bpiall_vbar1_runtime_exceptions
-	.quad	SCTLR_AARCH32_EL1_RES1 | SCTLR_I_BIT
-	.quad	aarch32_stub_fiq
 	check_vector_size workaround_bpiall_vbar0_fiq_sp_el0
 
 vector_entry workaround_bpiall_vbar0_serror_sp_el0
 	b	serror_sp_el0
-aarch32_stub_serror:
-	.word	EMIT_BPIALL
-	.word	EMIT_MOV_R0_IMM(8)
-	.word	EMIT_SMC
-aarch32_stub_ctx_serror:
-	.quad	(SPSR_AIF_MASK << SPSR_AIF_SHIFT | \
-	         SPSR_M_AARCH32 << SPSR_M_SHIFT | \
-	         MODE32_svc << MODE32_SHIFT)
-	.quad	workaround_bpiall_vbar1_runtime_exceptions
-	.quad	SCTLR_AARCH32_EL1_RES1 | SCTLR_I_BIT
-	.quad	aarch32_stub_serror
 	check_vector_size workaround_bpiall_vbar0_serror_sp_el0
 
 	/* ---------------------------------------------------------------------
@@ -188,19 +153,19 @@
 	 * ---------------------------------------------------------------------
 	 */
 vector_entry workaround_bpiall_vbar0_sync_exception_aarch64
-	enter_workaround aarch32_stub_ctx_smc
+	enter_workaround 1
 	check_vector_size workaround_bpiall_vbar0_sync_exception_aarch64
 
 vector_entry workaround_bpiall_vbar0_irq_aarch64
-	enter_workaround aarch32_stub_ctx_irq
+	enter_workaround 2
 	check_vector_size workaround_bpiall_vbar0_irq_aarch64
 
 vector_entry workaround_bpiall_vbar0_fiq_aarch64
-	enter_workaround aarch32_stub_ctx_fiq
+	enter_workaround 4
 	check_vector_size workaround_bpiall_vbar0_fiq_aarch64
 
 vector_entry workaround_bpiall_vbar0_serror_aarch64
-	enter_workaround aarch32_stub_ctx_serror
+	enter_workaround 8
 	check_vector_size workaround_bpiall_vbar0_serror_aarch64
 
 	/* ---------------------------------------------------------------------
@@ -208,19 +173,19 @@
 	 * ---------------------------------------------------------------------
 	 */
 vector_entry workaround_bpiall_vbar0_sync_exception_aarch32
-	enter_workaround aarch32_stub_ctx_smc
+	enter_workaround 1
 	check_vector_size workaround_bpiall_vbar0_sync_exception_aarch32
 
 vector_entry workaround_bpiall_vbar0_irq_aarch32
-	enter_workaround aarch32_stub_ctx_irq
+	enter_workaround 2
 	check_vector_size workaround_bpiall_vbar0_irq_aarch32
 
 vector_entry workaround_bpiall_vbar0_fiq_aarch32
-	enter_workaround aarch32_stub_ctx_fiq
+	enter_workaround 4
 	check_vector_size workaround_bpiall_vbar0_fiq_aarch32
 
 vector_entry workaround_bpiall_vbar0_serror_aarch32
-	enter_workaround aarch32_stub_ctx_serror
+	enter_workaround 8
 	check_vector_size workaround_bpiall_vbar0_serror_aarch32
 
 	/* ---------------------------------------------------------------------
@@ -297,31 +262,33 @@
 	 * ---------------------------------------------------------------------
 	 */
 vector_entry workaround_bpiall_vbar1_sync_exception_aarch32
-	/* Restore register state from the workaround context */
-	ldp	x2, x3, [sp, #CTX_CVE_2017_5715_OFFSET + CTX_CVE_2017_5715_QUAD0]
-	ldp	x4, x5, [sp, #CTX_CVE_2017_5715_OFFSET + CTX_CVE_2017_5715_QUAD2]
-	ldp	x6, x30, [sp, #CTX_CVE_2017_5715_OFFSET + CTX_CVE_2017_5715_QUAD4]
+	/*
+	 * w2 indicates which SEL1 stub was run and thus which original vector was used
+	 * w3-w6 contain saved system register state (esr_el3 in w3)
+	 * Restore LR and ELR_EL3 register state from the GP regs context
+	 */
+	ldp	x30, x7, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_LR]
 
 	/* Apply the restored system register state */
-	msr	scr_el3, x2
-	msr	spsr_el3, x3
-	msr	elr_el3, x4
-	msr	sctlr_el1, x5
-	msr	esr_el3, x6
+	msr	esr_el3, x3
+	msr	spsr_el3, x4
+	msr	scr_el3, x5
+	msr	sctlr_el1, x6
+	msr	elr_el3, x7
 
 	/*
 	 * Workaround is complete, so swap VBAR_EL3 to point
 	 * to workaround entry table in preparation for subsequent
 	 * Sync/IRQ/FIQ/SError exceptions.
 	 */
-	adr	x2, workaround_bpiall_vbar0_runtime_exceptions
-	msr	vbar_el3, x2
+	adr	x0, workaround_bpiall_vbar0_runtime_exceptions
+	msr	vbar_el3, x0
 
 	/*
-	 * Restore all GP regs except x0 and x1.  The value in x0
+	 * Restore all GP regs except x2 and x3 (esr).  The value in x2
 	 * indicates the type of the original exception.
 	 */
-	ldp	x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2]
+	ldp	x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0]
 	ldp	x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4]
 	ldp	x6, x7, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X6]
 	ldp	x8, x9, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X8]
@@ -336,37 +303,55 @@
 	ldp	x26, x27, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X26]
 	ldp	x28, x29, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X28]
 
+	/* Fast path Sync exceptions.  Static predictor will fall through. */
+	tbz	w2, #0, workaround_not_sync
+
 	/*
-	 * Each of these handlers will first restore x0 and x1 from
-	 * the context and the branch to the common implementation for
-	 * each of the exception types.
+	 * Check if SMC is coming from A64 state on #0
+	 * with W0 = SMCCC_ARCH_WORKAROUND_1
+	 *
+	 * This sequence evaluates as:
+	 *    (W0==SMCCC_ARCH_WORKAROUND_1) ? (ESR_EL3==SMC#0) : (NE)
+	 * allowing use of a single branch operation
 	 */
-	tbnz	x0, #1, workaround_bpiall_vbar1_irq
-	tbnz	x0, #2, workaround_bpiall_vbar1_fiq
-	tbnz	x0, #3, workaround_bpiall_vbar1_serror
-
-	/* Fallthrough case for Sync exception */
-	ldp	x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0]
+	orr	w2, wzr, #SMCCC_ARCH_WORKAROUND_1
+	cmp	w0, w2
+	mov_imm	w2, ESR_EL3_A64_SMC0
+	ccmp	w3, w2, #0, eq
+	/* Static predictor will predict a fall through */
+	bne	1f
+	eret
+1:
+	ldp	x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2]
 	b	sync_exception_aarch64
 	check_vector_size workaround_bpiall_vbar1_sync_exception_aarch32
 
 vector_entry workaround_bpiall_vbar1_irq_aarch32
 	b	report_unhandled_interrupt
-workaround_bpiall_vbar1_irq:
-	ldp	x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0]
+
+	/*
+	 * Post-workaround fan-out for non-sync exceptions
+	 */
+workaround_not_sync:
+	tbnz	w2, #3, workaround_bpiall_vbar1_serror
+	tbnz	w2, #2, workaround_bpiall_vbar1_fiq
+	/* IRQ */
+	ldp	x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2]
 	b	irq_aarch64
+
+workaround_bpiall_vbar1_fiq:
+	ldp	x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2]
+	b	fiq_aarch64
+
+workaround_bpiall_vbar1_serror:
+	ldp	x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2]
+	b	serror_aarch64
 	check_vector_size workaround_bpiall_vbar1_irq_aarch32
 
 vector_entry workaround_bpiall_vbar1_fiq_aarch32
 	b	report_unhandled_interrupt
-workaround_bpiall_vbar1_fiq:
-	ldp	x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0]
-	b	fiq_aarch64
 	check_vector_size workaround_bpiall_vbar1_fiq_aarch32
 
 vector_entry workaround_bpiall_vbar1_serror_aarch32
 	b	report_unhandled_exception
-workaround_bpiall_vbar1_serror:
-	ldp	x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0]
-	b	serror_aarch64
 	check_vector_size workaround_bpiall_vbar1_serror_aarch32
diff --git a/lib/cpus/aarch64/workaround_cve_2017_5715_mmu.S b/lib/cpus/aarch64/workaround_cve_2017_5715_mmu.S
index f478148..b24b620 100644
--- a/lib/cpus/aarch64/workaround_cve_2017_5715_mmu.S
+++ b/lib/cpus/aarch64/workaround_cve_2017_5715_mmu.S
@@ -1,26 +1,60 @@
 /*
- * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
 #include <arch.h>
+#include <arm_arch_svc.h>
 #include <asm_macros.S>
 #include <context.h>
 
 	.globl	workaround_mmu_runtime_exceptions
 
+#define ESR_EL3_A64_SMC0	0x5e000000
+
 vector_base workaround_mmu_runtime_exceptions
 
-	.macro	apply_workaround
+	.macro	apply_workaround _is_sync_exception
 	stp	x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0]
-	mrs	x0, sctlr_el3
+	mrs	x1, sctlr_el3
 	/* Disable MMU */
-	bic	x1, x0, #SCTLR_M_BIT
+	bic	x1, x1, #SCTLR_M_BIT
 	msr	sctlr_el3, x1
 	isb
-	/* Restore MMU config */
-	msr	sctlr_el3, x0
+	/* Enable MMU */
+	orr	x1, x1, #SCTLR_M_BIT
+	msr	sctlr_el3, x1
+	/*
+	 * Defer ISB to avoid synchronizing twice in case we hit
+	 * the workaround SMC call which will implicitly synchronize
+	 * because of the ERET instruction.
+	 */
+
+	/*
+	 * Ensure SMC is coming from A64 state on #0
+	 * with W0 = SMCCC_ARCH_WORKAROUND_1
+	 *
+	 * This sequence evaluates as:
+	 *    (W0==SMCCC_ARCH_WORKAROUND_1) ? (ESR_EL3==SMC#0) : (NE)
+	 * allowing use of a single branch operation
+	 */
+	.if \_is_sync_exception
+		orr	w1, wzr, #SMCCC_ARCH_WORKAROUND_1
+		cmp	w0, w1
+		mrs	x0, esr_el3
+		mov_imm	w1, ESR_EL3_A64_SMC0
+		ccmp	w0, w1, #0, eq
+		/* Static predictor will predict a fall through */
+		bne	1f
+		eret
+1:
+	.endif
+
+	/*
+	 * Synchronize now to enable the MMU.  This is required
+	 * to ensure the load pair below reads the data stored earlier.
+	 */
 	isb
 	ldp	x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0]
 	.endm
@@ -70,22 +104,22 @@
 	 * ---------------------------------------------------------------------
 	 */
 vector_entry workaround_mmu_sync_exception_aarch64
-	apply_workaround
+	apply_workaround _is_sync_exception=1
 	b	sync_exception_aarch64
 	check_vector_size workaround_mmu_sync_exception_aarch64
 
 vector_entry workaround_mmu_irq_aarch64
-	apply_workaround
+	apply_workaround _is_sync_exception=0
 	b	irq_aarch64
 	check_vector_size workaround_mmu_irq_aarch64
 
 vector_entry workaround_mmu_fiq_aarch64
-	apply_workaround
+	apply_workaround _is_sync_exception=0
 	b	fiq_aarch64
 	check_vector_size workaround_mmu_fiq_aarch64
 
 vector_entry workaround_mmu_serror_aarch64
-	apply_workaround
+	apply_workaround _is_sync_exception=0
 	b	serror_aarch64
 	check_vector_size workaround_mmu_serror_aarch64
 
@@ -94,21 +128,21 @@
 	 * ---------------------------------------------------------------------
 	 */
 vector_entry workaround_mmu_sync_exception_aarch32
-	apply_workaround
+	apply_workaround _is_sync_exception=1
 	b	sync_exception_aarch32
 	check_vector_size workaround_mmu_sync_exception_aarch32
 
 vector_entry workaround_mmu_irq_aarch32
-	apply_workaround
+	apply_workaround _is_sync_exception=0
 	b	irq_aarch32
 	check_vector_size workaround_mmu_irq_aarch32
 
 vector_entry workaround_mmu_fiq_aarch32
-	apply_workaround
+	apply_workaround _is_sync_exception=0
 	b	fiq_aarch32
 	check_vector_size workaround_mmu_fiq_aarch32
 
 vector_entry workaround_mmu_serror_aarch32
-	apply_workaround
+	apply_workaround _is_sync_exception=0
 	b	serror_aarch32
 	check_vector_size workaround_mmu_serror_aarch32
diff --git a/lib/extensions/amu/aarch32/amu.c b/lib/extensions/amu/aarch32/amu.c
index effc5bd..68cc4b3 100644
--- a/lib/extensions/amu/aarch32/amu.c
+++ b/lib/extensions/amu/aarch32/amu.c
@@ -5,6 +5,7 @@
  */
 
 #include <amu.h>
+#include <amu_private.h>
 #include <arch.h>
 #include <arch_helpers.h>
 #include <platform.h>
@@ -14,21 +15,26 @@
 
 struct amu_ctx {
 	uint64_t group0_cnts[AMU_GROUP0_NR_COUNTERS];
+	uint64_t group1_cnts[AMU_GROUP1_NR_COUNTERS];
 };
 
 static struct amu_ctx amu_ctxs[PLATFORM_CORE_COUNT];
 
-void amu_enable(int el2_unused)
+int amu_supported(void)
 {
 	uint64_t features;
 
 	features = read_id_pfr0() >> ID_PFR0_AMU_SHIFT;
-	if ((features & ID_PFR0_AMU_MASK) != 1)
+	return (features & ID_PFR0_AMU_MASK) == 1;
+}
+
+void amu_enable(int el2_unused)
+{
+	if (!amu_supported())
 		return;
 
 	if (el2_unused) {
 		uint64_t v;
-
 		/*
 		 * Non-secure access from EL0 or EL1 to the Activity Monitor
 		 * registers do not trap to EL2.
@@ -40,15 +46,64 @@
 
 	/* Enable group 0 counters */
 	write_amcntenset0(AMU_GROUP0_COUNTERS_MASK);
+
+	/* Enable group 1 counters */
+	write_amcntenset1(AMU_GROUP1_COUNTERS_MASK);
+}
+
+/* Read the group 0 counter identified by the given `idx`. */
+uint64_t amu_group0_cnt_read(int idx)
+{
+	assert(amu_supported());
+	assert(idx >= 0 && idx < AMU_GROUP0_NR_COUNTERS);
+
+	return amu_group0_cnt_read_internal(idx);
+}
+
+/* Write the group 0 counter identified by the given `idx` with `val`. */
+void amu_group0_cnt_write(int idx, uint64_t val)
+{
+	assert(amu_supported());
+	assert(idx >= 0 && idx < AMU_GROUP0_NR_COUNTERS);
+
+	amu_group0_cnt_write_internal(idx, val);
+	isb();
+}
+
+/* Read the group 1 counter identified by the given `idx`. */
+uint64_t amu_group1_cnt_read(int idx)
+{
+	assert(amu_supported());
+	assert(idx >= 0 && idx < AMU_GROUP1_NR_COUNTERS);
+
+	return amu_group1_cnt_read_internal(idx);
+}
+
+/* Write the group 1 counter identified by the given `idx` with `val`. */
+void amu_group1_cnt_write(int idx, uint64_t val)
+{
+	assert(amu_supported());
+	assert(idx >= 0 && idx < AMU_GROUP1_NR_COUNTERS);
+
+	amu_group1_cnt_write_internal(idx, val);
+	isb();
+}
+
+void amu_group1_set_evtype(int idx, unsigned int val)
+{
+	assert(amu_supported());
+	assert(idx >= 0 && idx < AMU_GROUP1_NR_COUNTERS);
+
+	amu_group1_set_evtype_internal(idx, val);
+	isb();
 }
 
 static void *amu_context_save(const void *arg)
 {
 	struct amu_ctx *ctx;
-	uint64_t features;
+	int i;
 
-	features = read_id_pfr0() >> ID_PFR0_AMU_SHIFT;
-	if ((features & ID_PFR0_AMU_MASK) != 1)
+	if (!amu_supported())
 		return (void *)-1;
 
 	ctx = &amu_ctxs[plat_my_core_pos()];
@@ -61,12 +116,14 @@
 	 * counter values from the future via the memory mapped view.
 	 */
 	write_amcntenclr0(AMU_GROUP0_COUNTERS_MASK);
+	write_amcntenclr1(AMU_GROUP1_COUNTERS_MASK);
 	isb();
 
-	ctx->group0_cnts[0] = read64_amevcntr00();
-	ctx->group0_cnts[1] = read64_amevcntr01();
-	ctx->group0_cnts[2] = read64_amevcntr02();
-	ctx->group0_cnts[3] = read64_amevcntr03();
+	for (i = 0; i < AMU_GROUP0_NR_COUNTERS; i++)
+		ctx->group0_cnts[i] = amu_group0_cnt_read(i);
+
+	for (i = 0; i < AMU_GROUP1_NR_COUNTERS; i++)
+		ctx->group1_cnts[i] = amu_group1_cnt_read(i);
 
 	return 0;
 }
@@ -75,6 +132,7 @@
 {
 	struct amu_ctx *ctx;
 	uint64_t features;
+	int i;
 
 	features = read_id_pfr0() >> ID_PFR0_AMU_SHIFT;
 	if ((features & ID_PFR0_AMU_MASK) != 1)
@@ -86,19 +144,16 @@
 	assert(read_amcntenset0() == 0);
 
 	/* Restore group 0 counters */
-	if (AMU_GROUP0_COUNTERS_MASK & (1U << 0))
-		write64_amevcntr00(ctx->group0_cnts[0]);
-	if (AMU_GROUP0_COUNTERS_MASK & (1U << 1))
-		write64_amevcntr01(ctx->group0_cnts[1]);
-	if (AMU_GROUP0_COUNTERS_MASK & (1U << 2))
-		write64_amevcntr02(ctx->group0_cnts[2]);
-	if (AMU_GROUP0_COUNTERS_MASK & (1U << 3))
-		write64_amevcntr03(ctx->group0_cnts[3]);
-	isb();
+	for (i = 0; i < AMU_GROUP0_NR_COUNTERS; i++)
+		amu_group0_cnt_write(i, ctx->group0_cnts[i]);
+	for (i = 0; i < AMU_GROUP1_NR_COUNTERS; i++)
+		amu_group1_cnt_write(i, ctx->group1_cnts[i]);
 
 	/* Enable group 0 counters */
 	write_amcntenset0(AMU_GROUP0_COUNTERS_MASK);
 
+	/* Enable group 1 counters */
+	write_amcntenset1(AMU_GROUP1_COUNTERS_MASK);
 	return 0;
 }
 
diff --git a/lib/extensions/amu/aarch32/amu_helpers.S b/lib/extensions/amu/aarch32/amu_helpers.S
new file mode 100644
index 0000000..84dca04
--- /dev/null
+++ b/lib/extensions/amu/aarch32/amu_helpers.S
@@ -0,0 +1,265 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <assert_macros.S>
+#include <asm_macros.S>
+
+	.globl	amu_group0_cnt_read_internal
+	.globl	amu_group0_cnt_write_internal
+	.globl	amu_group1_cnt_read_internal
+	.globl	amu_group1_cnt_write_internal
+	.globl	amu_group1_set_evtype_internal
+
+/*
+ * uint64_t amu_group0_cnt_read_internal(int idx);
+ *
+ * Given `idx`, read the corresponding AMU counter
+ * and return it in `r0`.
+ */
+func amu_group0_cnt_read_internal
+#if ENABLE_ASSERTIONS
+	/* `idx` should be between [0, 3] */
+	mov	r1, r0
+	lsr	r1, r1, #2
+	cmp	r1, #0
+	ASM_ASSERT(eq)
+#endif
+
+	/*
+	 * Given `idx` calculate address of ldcopr16/bx lr instruction pair
+	 * in the table below.
+	 */
+	adr	r1, 1f
+	lsl	r0, r0, #3	/* each ldcopr16/bx lr sequence is 8 bytes */
+	add	r1, r1, r0
+	bx	r1
+1:
+	ldcopr16	r0, r1, AMEVCNTR00	/* index 0 */
+	bx		lr
+	ldcopr16	r0, r1, AMEVCNTR01	/* index 1 */
+	bx 		lr
+	ldcopr16	r0, r1, AMEVCNTR02	/* index 2 */
+	bx 		lr
+	ldcopr16	r0, r1, AMEVCNTR03	/* index 3 */
+	bx 		lr
+endfunc amu_group0_cnt_read_internal
+
+/*
+ * void amu_group0_cnt_write_internal(int idx, uint64_t val);
+ *
+ * Given `idx`, write `val` to the corresponding AMU counter.
+ */
+func amu_group0_cnt_write_internal
+#if ENABLE_ASSERTIONS
+	/* `idx` should be between [0, 3] */
+	mov	r2, r0
+	lsr	r2, r2, #2
+	cmp	r2, #0
+	ASM_ASSERT(eq)
+#endif
+
+	/*
+	 * Given `idx` calculate address of stcopr16/bx lr instruction pair
+	 * in the table below.
+	 */
+	adr	r2, 1f
+	lsl	r0, r0, #3	/* each stcopr16/bx lr sequence is 8 bytes */
+	add	r2, r2, r0
+	bx	r2
+
+1:
+	stcopr16	r0,r1, AMEVCNTR00	/* index 0 */
+	bx 		lr
+	stcopr16	r0,r1, AMEVCNTR01	/* index 1 */
+	bx 		lr
+	stcopr16	r0,r1, AMEVCNTR02	/* index 2 */
+	bx 		lr
+	stcopr16	r0,r1, AMEVCNTR03	/* index 3 */
+	bx 		lr
+endfunc amu_group0_cnt_write_internal
+
+/*
+ * uint64_t amu_group1_cnt_read_internal(int idx);
+ *
+ * Given `idx`, read the corresponding AMU counter
+ * and return it in `r0`.
+ */
+func amu_group1_cnt_read_internal
+#if ENABLE_ASSERTIONS
+	/* `idx` should be between [0, 15] */
+	mov	r2, r0
+	lsr	r2, r2, #4
+	cmp	r2, #0
+	ASM_ASSERT(eq)
+#endif
+
+	/*
+	 * Given `idx` calculate address of ldcopr16/bx lr instruction pair
+	 * in the table below.
+	 */
+	adr	r1, 1f
+	lsl	r0, r0, #3	/* each ldcopr16/bx lr sequence is 8 bytes */
+	add	r1, r1, r0
+	bx	r1
+
+1:
+	ldcopr16	r0,r1, AMEVCNTR10	/* index 0 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR11	/* index 1 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR12	/* index 2 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR13	/* index 3 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR14	/* index 4 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR15	/* index 5 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR16	/* index 6 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR17	/* index 7 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR18	/* index 8 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR19	/* index 9 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR1A	/* index 10 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR1B	/* index 11 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR1C	/* index 12 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR1D	/* index 13 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR1E	/* index 14 */
+	bx	lr
+	ldcopr16	r0,r1, AMEVCNTR1F	/* index 15 */
+	bx	lr
+endfunc amu_group1_cnt_read_internal
+
+/*
+ * void amu_group1_cnt_write_internal(int idx, uint64_t val);
+ *
+ * Given `idx`, write `val` to the corresponding AMU counter.
+ */
+func amu_group1_cnt_write_internal
+#if ENABLE_ASSERTIONS
+	/* `idx` should be between [0, 15] */
+	mov	r2, r0
+	lsr	r2, r2, #4
+	cmp	r2, #0
+	ASM_ASSERT(eq)
+#endif
+
+	/*
+	 * Given `idx` calculate address of ldcopr16/bx lr instruction pair
+	 * in the table below.
+	 */
+	adr	r2, 1f
+	lsl	r0, r0, #3	/* each stcopr16/bx lr sequence is 8 bytes */
+	add	r2, r2, r0
+	bx	r2
+
+1:
+	stcopr16	r0,r1,	AMEVCNTR10	/* index 0 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR11	/* index 1 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR12	/* index 2 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR13	/* index 3 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR14	/* index 4 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR15	/* index 5 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR16	/* index 6 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR17	/* index 7 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR18	/* index 8 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR19	/* index 9 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR1A	/* index 10 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR1B	/* index 11 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR1C	/* index 12 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR1D	/* index 13 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR1E	/* index 14 */
+	bx		lr
+	stcopr16	r0,r1,	AMEVCNTR1F	/* index 15 */
+	bx		lr
+endfunc amu_group1_cnt_write_internal
+
+/*
+ * void amu_group1_set_evtype_internal(int idx, unsigned int val);
+ *
+ * Program the AMU event type register indexed by `idx`
+ * with the value `val`.
+ */
+func amu_group1_set_evtype_internal
+#if ENABLE_ASSERTIONS
+	/* `idx` should be between [0, 15] */
+	mov	r2, r0
+	lsr	r2, r2, #4
+	cmp	r2, #0
+	ASM_ASSERT(eq)
+
+	/* val should be between [0, 65535] */
+	mov	r2, r1
+	lsr	r2, r2, #16
+	cmp	r2, #0
+	ASM_ASSERT(eq)
+#endif
+
+	/*
+	 * Given `idx` calculate address of stcopr/bx lr instruction pair
+	 * in the table below.
+	 */
+	adr	r2, 1f
+	lsl	r0, r0, #3	/* each stcopr/bx lr sequence is 8 bytes */
+	add	r2, r2, r0
+	bx	r2
+
+1:
+	stcopr	r0,	AMEVTYPER10 /* index 0 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER11 /* index 1 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER12 /* index 2 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER13 /* index 3 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER14 /* index 4 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER15 /* index 5 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER16 /* index 6 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER17 /* index 7 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER18 /* index 8 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER19 /* index 9 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER1A /* index 10 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER1B /* index 11 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER1C /* index 12 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER1D /* index 13 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER1E /* index 14 */
+	bx	lr
+	stcopr	r0,	AMEVTYPER1F /* index 15 */
+	bx	lr
+endfunc amu_group1_set_evtype_internal
diff --git a/lib/extensions/amu/aarch64/amu.c b/lib/extensions/amu/aarch64/amu.c
index d7645a9..7d39f35 100644
--- a/lib/extensions/amu/aarch64/amu.c
+++ b/lib/extensions/amu/aarch64/amu.c
@@ -172,7 +172,6 @@
 	for (i = 0; i < AMU_GROUP1_NR_COUNTERS; i++)
 		if (AMU_GROUP1_COUNTERS_MASK & (1U << i))
 			amu_group1_cnt_write(i, ctx->group1_cnts[i]);
-	isb();
 
 	/* Restore group 0/1 counter configuration */
 	write_amcntenset0_el0(AMU_GROUP0_COUNTERS_MASK);
diff --git a/lib/optee/optee_utils.c b/lib/optee/optee_utils.c
index deb948c..87e52bd 100644
--- a/lib/optee/optee_utils.c
+++ b/lib/optee/optee_utils.c
@@ -158,9 +158,12 @@
 	 *	and BL32_EXTRA2_IMAGE_ID to load pager and paged bin.
 	 */
 	if (!tee_validate_header(optee_header)) {
-		INFO("Invalid OPTEE header, legacy mode.\n");
-		/* Set legacy OPTEE runtime arch - aarch64 */
+		INFO("Invalid OPTEE header, set legacy mode.\n");
+#ifdef AARCH64
 		header_ep->args.arg0 = MODE_RW_64;
+#else
+		header_ep->args.arg0 = MODE_RW_32;
+#endif
 		return 0;
 	}
 
@@ -208,10 +211,16 @@
 	header_ep->args.arg2 = paged_image_info->image_size;
 
 	/* Set OPTEE runtime arch - aarch32/aarch64 */
-	if (optee_header->arch == 0)
+	if (optee_header->arch == 0) {
 		header_ep->args.arg0 = MODE_RW_32;
-	else
+	} else {
+#ifdef AARCH64
 		header_ep->args.arg0 = MODE_RW_64;
+#else
+		ERROR("Cannot boot an AArch64 OP-TEE\n");
+		return -1;
+#endif
+	}
 
 	return 0;
 }
diff --git a/lib/psci/psci_main.c b/lib/psci/psci_main.c
index 8e41cf0..88cf5cb 100644
--- a/lib/psci/psci_main.c
+++ b/lib/psci/psci_main.c
@@ -1,11 +1,12 @@
 /*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
 #include <arch.h>
 #include <arch_helpers.h>
+#include <arm_arch_svc.h>
 #include <assert.h>
 #include <debug.h>
 #include <platform.h>
@@ -322,6 +323,9 @@
 {
 	unsigned int local_caps = psci_caps;
 
+	if (psci_fid == SMCCC_VERSION)
+		return PSCI_E_SUCCESS;
+
 	/* Check if it is a 64 bit function */
 	if (((psci_fid >> FUNCID_CC_SHIFT) & FUNCID_CC_MASK) == SMC_64)
 		local_caps &= PSCI_CAP_64BIT_MASK;
diff --git a/lib/zlib/adler32.c b/lib/zlib/adler32.c
new file mode 100644
index 0000000..d0be438
--- /dev/null
+++ b/lib/zlib/adler32.c
@@ -0,0 +1,186 @@
+/* adler32.c -- compute the Adler-32 checksum of a data stream
+ * Copyright (C) 1995-2011, 2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zutil.h"
+
+local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
+
+#define BASE 65521U     /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
+#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf)   DO8(buf,0); DO8(buf,8);
+
+/* use NO_DIVIDE if your processor does not do division in hardware --
+   try it both ways to see which is faster */
+#ifdef NO_DIVIDE
+/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
+   (thank you to John Reiser for pointing this out) */
+#  define CHOP(a) \
+    do { \
+        unsigned long tmp = a >> 16; \
+        a &= 0xffffUL; \
+        a += (tmp << 4) - tmp; \
+    } while (0)
+#  define MOD28(a) \
+    do { \
+        CHOP(a); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#  define MOD(a) \
+    do { \
+        CHOP(a); \
+        MOD28(a); \
+    } while (0)
+#  define MOD63(a) \
+    do { /* this assumes a is not negative */ \
+        z_off64_t tmp = a >> 32; \
+        a &= 0xffffffffL; \
+        a += (tmp << 8) - (tmp << 5) + tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#else
+#  define MOD(a) a %= BASE
+#  define MOD28(a) a %= BASE
+#  define MOD63(a) a %= BASE
+#endif
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_z(adler, buf, len)
+    uLong adler;
+    const Bytef *buf;
+    z_size_t len;
+{
+    unsigned long sum2;
+    unsigned n;
+
+    /* split Adler-32 into component sums */
+    sum2 = (adler >> 16) & 0xffff;
+    adler &= 0xffff;
+
+    /* in case user likes doing a byte at a time, keep it fast */
+    if (len == 1) {
+        adler += buf[0];
+        if (adler >= BASE)
+            adler -= BASE;
+        sum2 += adler;
+        if (sum2 >= BASE)
+            sum2 -= BASE;
+        return adler | (sum2 << 16);
+    }
+
+    /* initial Adler-32 value (deferred check for len == 1 speed) */
+    if (buf == Z_NULL)
+        return 1L;
+
+    /* in case short lengths are provided, keep it somewhat fast */
+    if (len < 16) {
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        if (adler >= BASE)
+            adler -= BASE;
+        MOD28(sum2);            /* only added so many BASE's */
+        return adler | (sum2 << 16);
+    }
+
+    /* do length NMAX blocks -- requires just one modulo operation */
+    while (len >= NMAX) {
+        len -= NMAX;
+        n = NMAX / 16;          /* NMAX is divisible by 16 */
+        do {
+            DO16(buf);          /* 16 sums unrolled */
+            buf += 16;
+        } while (--n);
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* do remaining bytes (less than NMAX, still just one modulo) */
+    if (len) {                  /* avoid modulos if none remaining */
+        while (len >= 16) {
+            len -= 16;
+            DO16(buf);
+            buf += 16;
+        }
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* return recombined sums */
+    return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32(adler, buf, len)
+    uLong adler;
+    const Bytef *buf;
+    uInt len;
+{
+    return adler32_z(adler, buf, len);
+}
+
+/* ========================================================================= */
+local uLong adler32_combine_(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off64_t len2;
+{
+    unsigned long sum1;
+    unsigned long sum2;
+    unsigned rem;
+
+    /* for negative len, return invalid adler32 as a clue for debugging */
+    if (len2 < 0)
+        return 0xffffffffUL;
+
+    /* the derivation of this formula is left as an exercise for the reader */
+    MOD63(len2);                /* assumes len2 >= 0 */
+    rem = (unsigned)len2;
+    sum1 = adler1 & 0xffff;
+    sum2 = rem * sum1;
+    MOD(sum2);
+    sum1 += (adler2 & 0xffff) + BASE - 1;
+    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum2 >= ((unsigned long)BASE << 1)) sum2 -= ((unsigned long)BASE << 1);
+    if (sum2 >= BASE) sum2 -= BASE;
+    return sum1 | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off_t len2;
+{
+    return adler32_combine_(adler1, adler2, len2);
+}
+
+uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off64_t len2;
+{
+    return adler32_combine_(adler1, adler2, len2);
+}
diff --git a/lib/zlib/crc32.c b/lib/zlib/crc32.c
new file mode 100644
index 0000000..9580440
--- /dev/null
+++ b/lib/zlib/crc32.c
@@ -0,0 +1,442 @@
+/* crc32.c -- compute the CRC-32 of a data stream
+ * Copyright (C) 1995-2006, 2010, 2011, 2012, 2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
+ * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
+ * tables for updating the shift register in one step with three exclusive-ors
+ * instead of four steps with four exclusive-ors.  This results in about a
+ * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
+ */
+
+/* @(#) $Id$ */
+
+/*
+  Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
+  protection on the static variables used to control the first-use generation
+  of the crc tables.  Therefore, if you #define DYNAMIC_CRC_TABLE, you should
+  first call get_crc_table() to initialize the tables before allowing more than
+  one thread to use crc32().
+
+  DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h.
+ */
+
+#ifdef MAKECRCH
+#  include <stdio.h>
+#  ifndef DYNAMIC_CRC_TABLE
+#    define DYNAMIC_CRC_TABLE
+#  endif /* !DYNAMIC_CRC_TABLE */
+#endif /* MAKECRCH */
+
+#include "zutil.h"      /* for STDC and FAR definitions */
+
+/* Definitions for doing the crc four data bytes at a time. */
+#if !defined(NOBYFOUR) && defined(Z_U4)
+#  define BYFOUR
+#endif
+#ifdef BYFOUR
+   local unsigned long crc32_little OF((unsigned long,
+                        const unsigned char FAR *, z_size_t));
+   local unsigned long crc32_big OF((unsigned long,
+                        const unsigned char FAR *, z_size_t));
+#  define TBLS 8
+#else
+#  define TBLS 1
+#endif /* BYFOUR */
+
+/* Local functions for crc concatenation */
+local unsigned long gf2_matrix_times OF((unsigned long *mat,
+                                         unsigned long vec));
+local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
+local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
+
+
+#ifdef DYNAMIC_CRC_TABLE
+
+local volatile int crc_table_empty = 1;
+local z_crc_t FAR crc_table[TBLS][256];
+local void make_crc_table OF((void));
+#ifdef MAKECRCH
+   local void write_table OF((FILE *, const z_crc_t FAR *));
+#endif /* MAKECRCH */
+/*
+  Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
+  x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
+
+  Polynomials over GF(2) are represented in binary, one bit per coefficient,
+  with the lowest powers in the most significant bit.  Then adding polynomials
+  is just exclusive-or, and multiplying a polynomial by x is a right shift by
+  one.  If we call the above polynomial p, and represent a byte as the
+  polynomial q, also with the lowest power in the most significant bit (so the
+  byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
+  where a mod b means the remainder after dividing a by b.
+
+  This calculation is done using the shift-register method of multiplying and
+  taking the remainder.  The register is initialized to zero, and for each
+  incoming bit, x^32 is added mod p to the register if the bit is a one (where
+  x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
+  x (which is shifting right by one and adding x^32 mod p if the bit shifted
+  out is a one).  We start with the highest power (least significant bit) of
+  q and repeat for all eight bits of q.
+
+  The first table is simply the CRC of all possible eight bit values.  This is
+  all the information needed to generate CRCs on data a byte at a time for all
+  combinations of CRC register values and incoming bytes.  The remaining tables
+  allow for word-at-a-time CRC calculation for both big-endian and little-
+  endian machines, where a word is four bytes.
+*/
+local void make_crc_table()
+{
+    z_crc_t c;
+    int n, k;
+    z_crc_t poly;                       /* polynomial exclusive-or pattern */
+    /* terms of polynomial defining this crc (except x^32): */
+    static volatile int first = 1;      /* flag to limit concurrent making */
+    static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+
+    /* See if another task is already doing this (not thread-safe, but better
+       than nothing -- significantly reduces duration of vulnerability in
+       case the advice about DYNAMIC_CRC_TABLE is ignored) */
+    if (first) {
+        first = 0;
+
+        /* make exclusive-or pattern from polynomial (0xedb88320UL) */
+        poly = 0;
+        for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
+            poly |= (z_crc_t)1 << (31 - p[n]);
+
+        /* generate a crc for every 8-bit value */
+        for (n = 0; n < 256; n++) {
+            c = (z_crc_t)n;
+            for (k = 0; k < 8; k++)
+                c = c & 1 ? poly ^ (c >> 1) : c >> 1;
+            crc_table[0][n] = c;
+        }
+
+#ifdef BYFOUR
+        /* generate crc for each value followed by one, two, and three zeros,
+           and then the byte reversal of those as well as the first table */
+        for (n = 0; n < 256; n++) {
+            c = crc_table[0][n];
+            crc_table[4][n] = ZSWAP32(c);
+            for (k = 1; k < 4; k++) {
+                c = crc_table[0][c & 0xff] ^ (c >> 8);
+                crc_table[k][n] = c;
+                crc_table[k + 4][n] = ZSWAP32(c);
+            }
+        }
+#endif /* BYFOUR */
+
+        crc_table_empty = 0;
+    }
+    else {      /* not first */
+        /* wait for the other guy to finish (not efficient, but rare) */
+        while (crc_table_empty)
+            ;
+    }
+
+#ifdef MAKECRCH
+    /* write out CRC tables to crc32.h */
+    {
+        FILE *out;
+
+        out = fopen("crc32.h", "w");
+        if (out == NULL) return;
+        fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
+        fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
+        fprintf(out, "local const z_crc_t FAR ");
+        fprintf(out, "crc_table[TBLS][256] =\n{\n  {\n");
+        write_table(out, crc_table[0]);
+#  ifdef BYFOUR
+        fprintf(out, "#ifdef BYFOUR\n");
+        for (k = 1; k < 8; k++) {
+            fprintf(out, "  },\n  {\n");
+            write_table(out, crc_table[k]);
+        }
+        fprintf(out, "#endif\n");
+#  endif /* BYFOUR */
+        fprintf(out, "  }\n};\n");
+        fclose(out);
+    }
+#endif /* MAKECRCH */
+}
+
+#ifdef MAKECRCH
+local void write_table(out, table)
+    FILE *out;
+    const z_crc_t FAR *table;
+{
+    int n;
+
+    for (n = 0; n < 256; n++)
+        fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : "    ",
+                (unsigned long)(table[n]),
+                n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
+}
+#endif /* MAKECRCH */
+
+#else /* !DYNAMIC_CRC_TABLE */
+/* ========================================================================
+ * Tables of CRC-32s of all single-byte values, made by make_crc_table().
+ */
+#include "crc32.h"
+#endif /* DYNAMIC_CRC_TABLE */
+
+/* =========================================================================
+ * This function can be used by asm versions of crc32()
+ */
+const z_crc_t FAR * ZEXPORT get_crc_table()
+{
+#ifdef DYNAMIC_CRC_TABLE
+    if (crc_table_empty)
+        make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+    return (const z_crc_t FAR *)crc_table;
+}
+
+/* ========================================================================= */
+#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
+#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
+
+/* ========================================================================= */
+unsigned long ZEXPORT crc32_z(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    z_size_t len;
+{
+    if (buf == Z_NULL) return 0UL;
+
+#ifdef DYNAMIC_CRC_TABLE
+    if (crc_table_empty)
+        make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+
+#ifdef BYFOUR
+    if (sizeof(void *) == sizeof(ptrdiff_t)) {
+        z_crc_t endian;
+
+        endian = 1;
+        if (*((unsigned char *)(&endian)))
+            return crc32_little(crc, buf, len);
+        else
+            return crc32_big(crc, buf, len);
+    }
+#endif /* BYFOUR */
+    crc = crc ^ 0xffffffffUL;
+    while (len >= 8) {
+        DO8;
+        len -= 8;
+    }
+    if (len) do {
+        DO1;
+    } while (--len);
+    return crc ^ 0xffffffffUL;
+}
+
+/* ========================================================================= */
+unsigned long ZEXPORT crc32(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    uInt len;
+{
+    return crc32_z(crc, buf, len);
+}
+
+#ifdef BYFOUR
+
+/*
+   This BYFOUR code accesses the passed unsigned char * buffer with a 32-bit
+   integer pointer type. This violates the strict aliasing rule, where a
+   compiler can assume, for optimization purposes, that two pointers to
+   fundamentally different types won't ever point to the same memory. This can
+   manifest as a problem only if one of the pointers is written to. This code
+   only reads from those pointers. So long as this code remains isolated in
+   this compilation unit, there won't be a problem. For this reason, this code
+   should not be copied and pasted into a compilation unit in which other code
+   writes to the buffer that is passed to these routines.
+ */
+
+/* ========================================================================= */
+#define DOLIT4 c ^= *buf4++; \
+        c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
+            crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
+#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
+
+/* ========================================================================= */
+local unsigned long crc32_little(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    z_size_t len;
+{
+    register z_crc_t c;
+    register const z_crc_t FAR *buf4;
+
+    c = (z_crc_t)crc;
+    c = ~c;
+    while (len && ((ptrdiff_t)buf & 3)) {
+        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+        len--;
+    }
+
+    buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
+    while (len >= 32) {
+        DOLIT32;
+        len -= 32;
+    }
+    while (len >= 4) {
+        DOLIT4;
+        len -= 4;
+    }
+    buf = (const unsigned char FAR *)buf4;
+
+    if (len) do {
+        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+    } while (--len);
+    c = ~c;
+    return (unsigned long)c;
+}
+
+/* ========================================================================= */
+#define DOBIG4 c ^= *buf4++; \
+        c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
+            crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
+#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
+
+/* ========================================================================= */
+local unsigned long crc32_big(crc, buf, len)
+    unsigned long crc;
+    const unsigned char FAR *buf;
+    z_size_t len;
+{
+    register z_crc_t c;
+    register const z_crc_t FAR *buf4;
+
+    c = ZSWAP32((z_crc_t)crc);
+    c = ~c;
+    while (len && ((ptrdiff_t)buf & 3)) {
+        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+        len--;
+    }
+
+    buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
+    while (len >= 32) {
+        DOBIG32;
+        len -= 32;
+    }
+    while (len >= 4) {
+        DOBIG4;
+        len -= 4;
+    }
+    buf = (const unsigned char FAR *)buf4;
+
+    if (len) do {
+        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+    } while (--len);
+    c = ~c;
+    return (unsigned long)(ZSWAP32(c));
+}
+
+#endif /* BYFOUR */
+
+#define GF2_DIM 32      /* dimension of GF(2) vectors (length of CRC) */
+
+/* ========================================================================= */
+local unsigned long gf2_matrix_times(mat, vec)
+    unsigned long *mat;
+    unsigned long vec;
+{
+    unsigned long sum;
+
+    sum = 0;
+    while (vec) {
+        if (vec & 1)
+            sum ^= *mat;
+        vec >>= 1;
+        mat++;
+    }
+    return sum;
+}
+
+/* ========================================================================= */
+local void gf2_matrix_square(square, mat)
+    unsigned long *square;
+    unsigned long *mat;
+{
+    int n;
+
+    for (n = 0; n < GF2_DIM; n++)
+        square[n] = gf2_matrix_times(mat, mat[n]);
+}
+
+/* ========================================================================= */
+local uLong crc32_combine_(crc1, crc2, len2)
+    uLong crc1;
+    uLong crc2;
+    z_off64_t len2;
+{
+    int n;
+    unsigned long row;
+    unsigned long even[GF2_DIM];    /* even-power-of-two zeros operator */
+    unsigned long odd[GF2_DIM];     /* odd-power-of-two zeros operator */
+
+    /* degenerate case (also disallow negative lengths) */
+    if (len2 <= 0)
+        return crc1;
+
+    /* put operator for one zero bit in odd */
+    odd[0] = 0xedb88320UL;          /* CRC-32 polynomial */
+    row = 1;
+    for (n = 1; n < GF2_DIM; n++) {
+        odd[n] = row;
+        row <<= 1;
+    }
+
+    /* put operator for two zero bits in even */
+    gf2_matrix_square(even, odd);
+
+    /* put operator for four zero bits in odd */
+    gf2_matrix_square(odd, even);
+
+    /* apply len2 zeros to crc1 (first square will put the operator for one
+       zero byte, eight zero bits, in even) */
+    do {
+        /* apply zeros operator for this bit of len2 */
+        gf2_matrix_square(even, odd);
+        if (len2 & 1)
+            crc1 = gf2_matrix_times(even, crc1);
+        len2 >>= 1;
+
+        /* if no more bits set, then done */
+        if (len2 == 0)
+            break;
+
+        /* another iteration of the loop with odd and even swapped */
+        gf2_matrix_square(odd, even);
+        if (len2 & 1)
+            crc1 = gf2_matrix_times(odd, crc1);
+        len2 >>= 1;
+
+        /* if no more bits set, then done */
+    } while (len2 != 0);
+
+    /* return combined crc */
+    crc1 ^= crc2;
+    return crc1;
+}
+
+/* ========================================================================= */
+uLong ZEXPORT crc32_combine(crc1, crc2, len2)
+    uLong crc1;
+    uLong crc2;
+    z_off_t len2;
+{
+    return crc32_combine_(crc1, crc2, len2);
+}
+
+uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
+    uLong crc1;
+    uLong crc2;
+    z_off64_t len2;
+{
+    return crc32_combine_(crc1, crc2, len2);
+}
diff --git a/lib/zlib/crc32.h b/lib/zlib/crc32.h
new file mode 100644
index 0000000..9e0c778
--- /dev/null
+++ b/lib/zlib/crc32.h
@@ -0,0 +1,441 @@
+/* crc32.h -- tables for rapid CRC calculation
+ * Generated automatically by crc32.c
+ */
+
+local const z_crc_t FAR crc_table[TBLS][256] =
+{
+  {
+    0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
+    0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL,
+    0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
+    0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL,
+    0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL,
+    0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
+    0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL,
+    0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL,
+    0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
+    0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL,
+    0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL,
+    0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
+    0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL,
+    0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL,
+    0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
+    0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL,
+    0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL,
+    0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
+    0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL,
+    0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL,
+    0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
+    0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL,
+    0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL,
+    0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
+    0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL,
+    0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL,
+    0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
+    0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL,
+    0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL,
+    0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
+    0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL,
+    0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL,
+    0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
+    0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL,
+    0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL,
+    0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
+    0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL,
+    0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL,
+    0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
+    0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL,
+    0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL,
+    0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
+    0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL,
+    0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL,
+    0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
+    0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL,
+    0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL,
+    0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
+    0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL,
+    0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL,
+    0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
+    0x2d02ef8dUL
+#ifdef BYFOUR
+  },
+  {
+    0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL,
+    0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL,
+    0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL,
+    0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL,
+    0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL,
+    0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL,
+    0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL,
+    0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL,
+    0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL,
+    0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL,
+    0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL,
+    0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL,
+    0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL,
+    0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL,
+    0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL,
+    0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL,
+    0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL,
+    0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL,
+    0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL,
+    0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL,
+    0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL,
+    0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL,
+    0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL,
+    0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL,
+    0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL,
+    0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL,
+    0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL,
+    0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL,
+    0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL,
+    0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL,
+    0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL,
+    0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL,
+    0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL,
+    0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL,
+    0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL,
+    0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL,
+    0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL,
+    0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL,
+    0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL,
+    0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL,
+    0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL,
+    0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL,
+    0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL,
+    0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL,
+    0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL,
+    0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL,
+    0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL,
+    0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL,
+    0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL,
+    0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL,
+    0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL,
+    0x9324fd72UL
+  },
+  {
+    0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL,
+    0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL,
+    0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL,
+    0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL,
+    0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL,
+    0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL,
+    0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL,
+    0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL,
+    0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL,
+    0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL,
+    0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL,
+    0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL,
+    0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL,
+    0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL,
+    0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL,
+    0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL,
+    0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL,
+    0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL,
+    0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL,
+    0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL,
+    0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL,
+    0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL,
+    0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL,
+    0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL,
+    0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL,
+    0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL,
+    0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL,
+    0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL,
+    0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL,
+    0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL,
+    0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL,
+    0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL,
+    0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL,
+    0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL,
+    0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL,
+    0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL,
+    0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL,
+    0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL,
+    0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL,
+    0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL,
+    0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL,
+    0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL,
+    0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL,
+    0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL,
+    0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL,
+    0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL,
+    0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL,
+    0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL,
+    0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL,
+    0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL,
+    0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL,
+    0xbe9834edUL
+  },
+  {
+    0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL,
+    0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL,
+    0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL,
+    0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL,
+    0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL,
+    0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL,
+    0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL,
+    0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL,
+    0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL,
+    0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL,
+    0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL,
+    0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL,
+    0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL,
+    0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL,
+    0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL,
+    0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL,
+    0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL,
+    0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL,
+    0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL,
+    0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL,
+    0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL,
+    0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL,
+    0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL,
+    0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL,
+    0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL,
+    0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL,
+    0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL,
+    0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL,
+    0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL,
+    0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL,
+    0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL,
+    0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL,
+    0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL,
+    0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL,
+    0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL,
+    0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL,
+    0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL,
+    0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL,
+    0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL,
+    0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL,
+    0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL,
+    0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL,
+    0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL,
+    0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL,
+    0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL,
+    0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL,
+    0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL,
+    0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL,
+    0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL,
+    0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL,
+    0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL,
+    0xde0506f1UL
+  },
+  {
+    0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL,
+    0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL,
+    0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL,
+    0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL,
+    0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL,
+    0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL,
+    0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL,
+    0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL,
+    0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL,
+    0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL,
+    0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL,
+    0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL,
+    0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL,
+    0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL,
+    0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL,
+    0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL,
+    0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL,
+    0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL,
+    0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL,
+    0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL,
+    0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL,
+    0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL,
+    0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL,
+    0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL,
+    0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL,
+    0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL,
+    0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL,
+    0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL,
+    0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL,
+    0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL,
+    0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL,
+    0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL,
+    0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL,
+    0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL,
+    0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL,
+    0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL,
+    0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL,
+    0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL,
+    0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL,
+    0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL,
+    0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL,
+    0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL,
+    0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL,
+    0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL,
+    0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL,
+    0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL,
+    0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL,
+    0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL,
+    0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL,
+    0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL,
+    0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL,
+    0x8def022dUL
+  },
+  {
+    0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL,
+    0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL,
+    0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL,
+    0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL,
+    0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL,
+    0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL,
+    0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL,
+    0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL,
+    0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL,
+    0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL,
+    0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL,
+    0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL,
+    0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL,
+    0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL,
+    0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL,
+    0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL,
+    0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL,
+    0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL,
+    0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL,
+    0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL,
+    0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL,
+    0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL,
+    0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL,
+    0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL,
+    0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL,
+    0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL,
+    0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL,
+    0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL,
+    0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL,
+    0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL,
+    0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL,
+    0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL,
+    0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL,
+    0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL,
+    0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL,
+    0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL,
+    0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL,
+    0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL,
+    0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL,
+    0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL,
+    0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL,
+    0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL,
+    0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL,
+    0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL,
+    0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL,
+    0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL,
+    0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL,
+    0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL,
+    0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL,
+    0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL,
+    0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL,
+    0x72fd2493UL
+  },
+  {
+    0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL,
+    0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL,
+    0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL,
+    0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL,
+    0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL,
+    0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL,
+    0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL,
+    0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL,
+    0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL,
+    0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL,
+    0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL,
+    0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL,
+    0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL,
+    0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL,
+    0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL,
+    0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL,
+    0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL,
+    0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL,
+    0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL,
+    0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL,
+    0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL,
+    0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL,
+    0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL,
+    0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL,
+    0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL,
+    0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL,
+    0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL,
+    0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL,
+    0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL,
+    0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL,
+    0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL,
+    0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL,
+    0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL,
+    0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL,
+    0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL,
+    0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL,
+    0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL,
+    0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL,
+    0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL,
+    0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL,
+    0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL,
+    0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL,
+    0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL,
+    0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL,
+    0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL,
+    0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL,
+    0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL,
+    0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL,
+    0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL,
+    0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL,
+    0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL,
+    0xed3498beUL
+  },
+  {
+    0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL,
+    0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL,
+    0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL,
+    0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL,
+    0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL,
+    0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL,
+    0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL,
+    0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL,
+    0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL,
+    0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL,
+    0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL,
+    0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL,
+    0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL,
+    0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL,
+    0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL,
+    0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL,
+    0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL,
+    0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL,
+    0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL,
+    0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL,
+    0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL,
+    0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL,
+    0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL,
+    0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL,
+    0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL,
+    0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL,
+    0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL,
+    0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL,
+    0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL,
+    0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL,
+    0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL,
+    0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL,
+    0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL,
+    0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL,
+    0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL,
+    0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL,
+    0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL,
+    0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL,
+    0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL,
+    0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL,
+    0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL,
+    0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL,
+    0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL,
+    0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL,
+    0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL,
+    0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL,
+    0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL,
+    0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL,
+    0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL,
+    0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL,
+    0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL,
+    0xf10605deUL
+#endif
+  }
+};
diff --git a/lib/zlib/inffast.c b/lib/zlib/inffast.c
new file mode 100644
index 0000000..0dbd1db
--- /dev/null
+++ b/lib/zlib/inffast.c
@@ -0,0 +1,323 @@
+/* inffast.c -- fast decoding
+ * Copyright (C) 1995-2017 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifdef ASMINF
+#  pragma message("Assembler code may have bugs -- use at your own risk")
+#else
+
+/*
+   Decode literal, length, and distance codes and write out the resulting
+   literal and match bytes until either not enough input or output is
+   available, an end-of-block is encountered, or a data error is encountered.
+   When large enough input and output buffers are supplied to inflate(), for
+   example, a 16K input buffer and a 64K output buffer, more than 95% of the
+   inflate execution time is spent in this routine.
+
+   Entry assumptions:
+
+        state->mode == LEN
+        strm->avail_in >= 6
+        strm->avail_out >= 258
+        start >= strm->avail_out
+        state->bits < 8
+
+   On return, state->mode is one of:
+
+        LEN -- ran out of enough output space or enough available input
+        TYPE -- reached end of block code, inflate() to interpret next block
+        BAD -- error in block data
+
+   Notes:
+
+    - The maximum input bits used by a length/distance pair is 15 bits for the
+      length code, 5 bits for the length extra, 15 bits for the distance code,
+      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
+      Therefore if strm->avail_in >= 6, then there is enough input to avoid
+      checking for available input while decoding.
+
+    - The maximum bytes that a single length/distance pair can output is 258
+      bytes, which is the maximum length that can be coded.  inflate_fast()
+      requires strm->avail_out >= 258 for each loop to avoid checking for
+      output space.
+ */
+void ZLIB_INTERNAL inflate_fast(strm, start)
+z_streamp strm;
+unsigned start;         /* inflate()'s starting value for strm->avail_out */
+{
+    struct inflate_state FAR *state;
+    z_const unsigned char FAR *in;      /* local strm->next_in */
+    z_const unsigned char FAR *last;    /* have enough input while in < last */
+    unsigned char FAR *out;     /* local strm->next_out */
+    unsigned char FAR *beg;     /* inflate()'s initial strm->next_out */
+    unsigned char FAR *end;     /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+    unsigned dmax;              /* maximum distance from zlib header */
+#endif
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned wnext;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if wsize != 0 */
+    unsigned long hold;         /* local strm->hold */
+    unsigned bits;              /* local strm->bits */
+    code const FAR *lcode;      /* local strm->lencode */
+    code const FAR *dcode;      /* local strm->distcode */
+    unsigned lmask;             /* mask for first level of length codes */
+    unsigned dmask;             /* mask for first level of distance codes */
+    code here;                  /* retrieved table entry */
+    unsigned op;                /* code bits, operation, extra bits, or */
+                                /*  window position, window bytes to copy */
+    unsigned len;               /* match length, unused bytes */
+    unsigned dist;              /* match distance */
+    unsigned char FAR *from;    /* where to copy match from */
+
+    /* copy state to local variables */
+    state = (struct inflate_state FAR *)strm->state;
+    in = strm->next_in;
+    last = in + (strm->avail_in - 5);
+    out = strm->next_out;
+    beg = out - (start - strm->avail_out);
+    end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+    dmax = state->dmax;
+#endif
+    wsize = state->wsize;
+    whave = state->whave;
+    wnext = state->wnext;
+    window = state->window;
+    hold = state->hold;
+    bits = state->bits;
+    lcode = state->lencode;
+    dcode = state->distcode;
+    lmask = (1U << state->lenbits) - 1;
+    dmask = (1U << state->distbits) - 1;
+
+    /* decode literals and length/distances until end-of-block or not enough
+       input data or output space */
+    do {
+        if (bits < 15) {
+            hold += (unsigned long)(*in++) << bits;
+            bits += 8;
+            hold += (unsigned long)(*in++) << bits;
+            bits += 8;
+        }
+        here = lcode[hold & lmask];
+      dolen:
+        op = (unsigned)(here.bits);
+        hold >>= op;
+        bits -= op;
+        op = (unsigned)(here.op);
+        if (op == 0) {                          /* literal */
+            Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                    "inflate:         literal '%c'\n" :
+                    "inflate:         literal 0x%02x\n", here.val));
+            *out++ = (unsigned char)(here.val);
+        }
+        else if (op & 16) {                     /* length base */
+            len = (unsigned)(here.val);
+            op &= 15;                           /* number of extra bits */
+            if (op) {
+                if (bits < op) {
+                    hold += (unsigned long)(*in++) << bits;
+                    bits += 8;
+                }
+                len += (unsigned)hold & ((1U << op) - 1);
+                hold >>= op;
+                bits -= op;
+            }
+            Tracevv((stderr, "inflate:         length %u\n", len));
+            if (bits < 15) {
+                hold += (unsigned long)(*in++) << bits;
+                bits += 8;
+                hold += (unsigned long)(*in++) << bits;
+                bits += 8;
+            }
+            here = dcode[hold & dmask];
+          dodist:
+            op = (unsigned)(here.bits);
+            hold >>= op;
+            bits -= op;
+            op = (unsigned)(here.op);
+            if (op & 16) {                      /* distance base */
+                dist = (unsigned)(here.val);
+                op &= 15;                       /* number of extra bits */
+                if (bits < op) {
+                    hold += (unsigned long)(*in++) << bits;
+                    bits += 8;
+                    if (bits < op) {
+                        hold += (unsigned long)(*in++) << bits;
+                        bits += 8;
+                    }
+                }
+                dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+                if (dist > dmax) {
+                    strm->msg = (char *)"invalid distance too far back";
+                    state->mode = BAD;
+                    break;
+                }
+#endif
+                hold >>= op;
+                bits -= op;
+                Tracevv((stderr, "inflate:         distance %u\n", dist));
+                op = (unsigned)(out - beg);     /* max distance in output */
+                if (dist > op) {                /* see if copy from window */
+                    op = dist - op;             /* distance back in window */
+                    if (op > whave) {
+                        if (state->sane) {
+                            strm->msg =
+                                (char *)"invalid distance too far back";
+                            state->mode = BAD;
+                            break;
+                        }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+                        if (len <= op - whave) {
+                            do {
+                                *out++ = 0;
+                            } while (--len);
+                            continue;
+                        }
+                        len -= op - whave;
+                        do {
+                            *out++ = 0;
+                        } while (--op > whave);
+                        if (op == 0) {
+                            from = out - dist;
+                            do {
+                                *out++ = *from++;
+                            } while (--len);
+                            continue;
+                        }
+#endif
+                    }
+                    from = window;
+                    if (wnext == 0) {           /* very common case */
+                        from += wsize - op;
+                        if (op < len) {         /* some from window */
+                            len -= op;
+                            do {
+                                *out++ = *from++;
+                            } while (--op);
+                            from = out - dist;  /* rest from output */
+                        }
+                    }
+                    else if (wnext < op) {      /* wrap around window */
+                        from += wsize + wnext - op;
+                        op -= wnext;
+                        if (op < len) {         /* some from end of window */
+                            len -= op;
+                            do {
+                                *out++ = *from++;
+                            } while (--op);
+                            from = window;
+                            if (wnext < len) {  /* some from start of window */
+                                op = wnext;
+                                len -= op;
+                                do {
+                                    *out++ = *from++;
+                                } while (--op);
+                                from = out - dist;      /* rest from output */
+                            }
+                        }
+                    }
+                    else {                      /* contiguous in window */
+                        from += wnext - op;
+                        if (op < len) {         /* some from window */
+                            len -= op;
+                            do {
+                                *out++ = *from++;
+                            } while (--op);
+                            from = out - dist;  /* rest from output */
+                        }
+                    }
+                    while (len > 2) {
+                        *out++ = *from++;
+                        *out++ = *from++;
+                        *out++ = *from++;
+                        len -= 3;
+                    }
+                    if (len) {
+                        *out++ = *from++;
+                        if (len > 1)
+                            *out++ = *from++;
+                    }
+                }
+                else {
+                    from = out - dist;          /* copy direct from output */
+                    do {                        /* minimum length is three */
+                        *out++ = *from++;
+                        *out++ = *from++;
+                        *out++ = *from++;
+                        len -= 3;
+                    } while (len > 2);
+                    if (len) {
+                        *out++ = *from++;
+                        if (len > 1)
+                            *out++ = *from++;
+                    }
+                }
+            }
+            else if ((op & 64) == 0) {          /* 2nd level distance code */
+                here = dcode[here.val + (hold & ((1U << op) - 1))];
+                goto dodist;
+            }
+            else {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+        }
+        else if ((op & 64) == 0) {              /* 2nd level length code */
+            here = lcode[here.val + (hold & ((1U << op) - 1))];
+            goto dolen;
+        }
+        else if (op & 32) {                     /* end-of-block */
+            Tracevv((stderr, "inflate:         end of block\n"));
+            state->mode = TYPE;
+            break;
+        }
+        else {
+            strm->msg = (char *)"invalid literal/length code";
+            state->mode = BAD;
+            break;
+        }
+    } while (in < last && out < end);
+
+    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+    len = bits >> 3;
+    in -= len;
+    bits -= len << 3;
+    hold &= (1U << bits) - 1;
+
+    /* update state and return */
+    strm->next_in = in;
+    strm->next_out = out;
+    strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+    strm->avail_out = (unsigned)(out < end ?
+                                 257 + (end - out) : 257 - (out - end));
+    state->hold = hold;
+    state->bits = bits;
+    return;
+}
+
+/*
+   inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+   - Using bit fields for code structure
+   - Different op definition to avoid & for extra bits (do & for table bits)
+   - Three separate decoding do-loops for direct, window, and wnext == 0
+   - Special case for distance > 1 copies to do overlapped load and store copy
+   - Explicit branch predictions (based on measured branch probabilities)
+   - Deferring match copy and interspersed it with decoding subsequent codes
+   - Swapping literal/length else
+   - Swapping window/direct else
+   - Larger unrolled copy loops (three is about right)
+   - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */
diff --git a/lib/zlib/inffast.h b/lib/zlib/inffast.h
new file mode 100644
index 0000000..e5c1aa4
--- /dev/null
+++ b/lib/zlib/inffast.h
@@ -0,0 +1,11 @@
+/* inffast.h -- header to use inffast.c
+ * Copyright (C) 1995-2003, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
diff --git a/lib/zlib/inffixed.h b/lib/zlib/inffixed.h
new file mode 100644
index 0000000..d628327
--- /dev/null
+++ b/lib/zlib/inffixed.h
@@ -0,0 +1,94 @@
+    /* inffixed.h -- table for decoding fixed codes
+     * Generated automatically by makefixed().
+     */
+
+    /* WARNING: this file should *not* be used by applications.
+       It is part of the implementation of this library and is
+       subject to change. Applications should only use zlib.h.
+     */
+
+    static const code lenfix[512] = {
+        {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
+        {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
+        {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
+        {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
+        {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
+        {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
+        {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
+        {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
+        {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
+        {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
+        {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
+        {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
+        {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
+        {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
+        {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
+        {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
+        {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
+        {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+        {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
+        {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
+        {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
+        {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
+        {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
+        {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
+        {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
+        {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
+        {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
+        {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
+        {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
+        {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
+        {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
+        {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
+        {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
+        {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
+        {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
+        {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
+        {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
+        {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
+        {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
+        {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
+        {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
+        {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
+        {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
+        {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
+        {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
+        {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
+        {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
+        {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+        {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
+        {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
+        {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
+        {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
+        {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
+        {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
+        {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
+        {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
+        {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
+        {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
+        {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
+        {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
+        {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
+        {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
+        {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
+        {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
+        {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
+        {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+        {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
+        {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
+        {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
+        {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
+        {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
+        {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
+        {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
+        {0,9,255}
+    };
+
+    static const code distfix[32] = {
+        {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
+        {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
+        {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
+        {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
+        {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
+        {22,5,193},{64,5,0}
+    };
diff --git a/lib/zlib/inflate.c b/lib/zlib/inflate.c
new file mode 100644
index 0000000..ac333e8
--- /dev/null
+++ b/lib/zlib/inflate.c
@@ -0,0 +1,1561 @@
+/* inflate.c -- zlib decompression
+ * Copyright (C) 1995-2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * Change history:
+ *
+ * 1.2.beta0    24 Nov 2002
+ * - First version -- complete rewrite of inflate to simplify code, avoid
+ *   creation of window when not needed, minimize use of window when it is
+ *   needed, make inffast.c even faster, implement gzip decoding, and to
+ *   improve code readability and style over the previous zlib inflate code
+ *
+ * 1.2.beta1    25 Nov 2002
+ * - Use pointers for available input and output checking in inffast.c
+ * - Remove input and output counters in inffast.c
+ * - Change inffast.c entry and loop from avail_in >= 7 to >= 6
+ * - Remove unnecessary second byte pull from length extra in inffast.c
+ * - Unroll direct copy to three copies per loop in inffast.c
+ *
+ * 1.2.beta2    4 Dec 2002
+ * - Change external routine names to reduce potential conflicts
+ * - Correct filename to inffixed.h for fixed tables in inflate.c
+ * - Make hbuf[] unsigned char to match parameter type in inflate.c
+ * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset)
+ *   to avoid negation problem on Alphas (64 bit) in inflate.c
+ *
+ * 1.2.beta3    22 Dec 2002
+ * - Add comments on state->bits assertion in inffast.c
+ * - Add comments on op field in inftrees.h
+ * - Fix bug in reuse of allocated window after inflateReset()
+ * - Remove bit fields--back to byte structure for speed
+ * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths
+ * - Change post-increments to pre-increments in inflate_fast(), PPC biased?
+ * - Add compile time option, POSTINC, to use post-increments instead (Intel?)
+ * - Make MATCH copy in inflate() much faster for when inflate_fast() not used
+ * - Use local copies of stream next and avail values, as well as local bit
+ *   buffer and bit count in inflate()--for speed when inflate_fast() not used
+ *
+ * 1.2.beta4    1 Jan 2003
+ * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings
+ * - Move a comment on output buffer sizes from inffast.c to inflate.c
+ * - Add comments in inffast.c to introduce the inflate_fast() routine
+ * - Rearrange window copies in inflate_fast() for speed and simplification
+ * - Unroll last copy for window match in inflate_fast()
+ * - Use local copies of window variables in inflate_fast() for speed
+ * - Pull out common wnext == 0 case for speed in inflate_fast()
+ * - Make op and len in inflate_fast() unsigned for consistency
+ * - Add FAR to lcode and dcode declarations in inflate_fast()
+ * - Simplified bad distance check in inflate_fast()
+ * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new
+ *   source file infback.c to provide a call-back interface to inflate for
+ *   programs like gzip and unzip -- uses window as output buffer to avoid
+ *   window copying
+ *
+ * 1.2.beta5    1 Jan 2003
+ * - Improved inflateBack() interface to allow the caller to provide initial
+ *   input in strm.
+ * - Fixed stored blocks bug in inflateBack()
+ *
+ * 1.2.beta6    4 Jan 2003
+ * - Added comments in inffast.c on effectiveness of POSTINC
+ * - Typecasting all around to reduce compiler warnings
+ * - Changed loops from while (1) or do {} while (1) to for (;;), again to
+ *   make compilers happy
+ * - Changed type of window in inflateBackInit() to unsigned char *
+ *
+ * 1.2.beta7    27 Jan 2003
+ * - Changed many types to unsigned or unsigned short to avoid warnings
+ * - Added inflateCopy() function
+ *
+ * 1.2.0        9 Mar 2003
+ * - Changed inflateBack() interface to provide separate opaque descriptors
+ *   for the in() and out() functions
+ * - Changed inflateBack() argument and in_func typedef to swap the length
+ *   and buffer address return values for the input function
+ * - Check next_in and next_out for Z_NULL on entry to inflate()
+ *
+ * The history for versions after 1.2.0 are in ChangeLog in zlib distribution.
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifdef MAKEFIXED
+#  ifndef BUILDFIXED
+#    define BUILDFIXED
+#  endif
+#endif
+
+/* function prototypes */
+local int inflateStateCheck OF((z_streamp strm));
+local void fixedtables OF((struct inflate_state FAR *state));
+local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
+                           unsigned copy));
+#ifdef BUILDFIXED
+   void makefixed OF((void));
+#endif
+local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
+                              unsigned len));
+
+local int inflateStateCheck(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+    if (strm == Z_NULL ||
+        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0)
+        return 1;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state == Z_NULL || state->strm != strm ||
+        state->mode < HEAD || state->mode > SYNC)
+        return 1;
+    return 0;
+}
+
+int ZEXPORT inflateResetKeep(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    strm->total_in = strm->total_out = state->total = 0;
+    strm->msg = Z_NULL;
+    if (state->wrap)        /* to support ill-conceived Java test suite */
+        strm->adler = state->wrap & 1;
+    state->mode = HEAD;
+    state->last = 0;
+    state->havedict = 0;
+    state->dmax = 32768U;
+    state->head = Z_NULL;
+    state->hold = 0;
+    state->bits = 0;
+    state->lencode = state->distcode = state->next = state->codes;
+    state->sane = 1;
+    state->back = -1;
+    Tracev((stderr, "inflate: reset\n"));
+    return Z_OK;
+}
+
+int ZEXPORT inflateReset(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    state->wsize = 0;
+    state->whave = 0;
+    state->wnext = 0;
+    return inflateResetKeep(strm);
+}
+
+int ZEXPORT inflateReset2(strm, windowBits)
+z_streamp strm;
+int windowBits;
+{
+    int wrap;
+    struct inflate_state FAR *state;
+
+    /* get the state */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* extract wrap request from windowBits parameter */
+    if (windowBits < 0) {
+        wrap = 0;
+        windowBits = -windowBits;
+    }
+    else {
+        wrap = (windowBits >> 4) + 5;
+#ifdef GUNZIP
+        if (windowBits < 48)
+            windowBits &= 15;
+#endif
+    }
+
+    /* set number of window bits, free window if different */
+    if (windowBits && (windowBits < 8 || windowBits > 15))
+        return Z_STREAM_ERROR;
+    if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) {
+        ZFREE(strm, state->window);
+        state->window = Z_NULL;
+    }
+
+    /* update state and reset the rest of it */
+    state->wrap = wrap;
+    state->wbits = (unsigned)windowBits;
+    return inflateReset(strm);
+}
+
+int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
+z_streamp strm;
+int windowBits;
+const char *version;
+int stream_size;
+{
+    int ret;
+    struct inflate_state FAR *state;
+
+    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+        stream_size != (int)(sizeof(z_stream)))
+        return Z_VERSION_ERROR;
+    if (strm == Z_NULL) return Z_STREAM_ERROR;
+    strm->msg = Z_NULL;                 /* in case we return an error */
+    if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+        strm->zalloc = zcalloc;
+        strm->opaque = (voidpf)0;
+#endif
+    }
+    if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+        strm->zfree = zcfree;
+#endif
+    state = (struct inflate_state FAR *)
+            ZALLOC(strm, 1, sizeof(struct inflate_state));
+    if (state == Z_NULL) return Z_MEM_ERROR;
+    Tracev((stderr, "inflate: allocated\n"));
+    strm->state = (struct internal_state FAR *)state;
+    state->strm = strm;
+    state->window = Z_NULL;
+    state->mode = HEAD;     /* to pass state test in inflateReset2() */
+    ret = inflateReset2(strm, windowBits);
+    if (ret != Z_OK) {
+        ZFREE(strm, state);
+        strm->state = Z_NULL;
+    }
+    return ret;
+}
+
+int ZEXPORT inflateInit_(strm, version, stream_size)
+z_streamp strm;
+const char *version;
+int stream_size;
+{
+    return inflateInit2_(strm, DEF_WBITS, version, stream_size);
+}
+
+int ZEXPORT inflatePrime(strm, bits, value)
+z_streamp strm;
+int bits;
+int value;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (bits < 0) {
+        state->hold = 0;
+        state->bits = 0;
+        return Z_OK;
+    }
+    if (bits > 16 || state->bits + (uInt)bits > 32) return Z_STREAM_ERROR;
+    value &= (1L << bits) - 1;
+    state->hold += (unsigned)value << state->bits;
+    state->bits += (uInt)bits;
+    return Z_OK;
+}
+
+/*
+   Return state with length and distance decoding tables and index sizes set to
+   fixed code decoding.  Normally this returns fixed tables from inffixed.h.
+   If BUILDFIXED is defined, then instead this routine builds the tables the
+   first time it's called, and returns those tables the first time and
+   thereafter.  This reduces the size of the code by about 2K bytes, in
+   exchange for a little execution time.  However, BUILDFIXED should not be
+   used for threaded applications, since the rewriting of the tables and virgin
+   may not be thread-safe.
+ */
+local void fixedtables(state)
+struct inflate_state FAR *state;
+{
+#ifdef BUILDFIXED
+    static int virgin = 1;
+    static code *lenfix, *distfix;
+    static code fixed[544];
+
+    /* build fixed huffman tables if first call (may not be thread safe) */
+    if (virgin) {
+        unsigned sym, bits;
+        static code *next;
+
+        /* literal/length table */
+        sym = 0;
+        while (sym < 144) state->lens[sym++] = 8;
+        while (sym < 256) state->lens[sym++] = 9;
+        while (sym < 280) state->lens[sym++] = 7;
+        while (sym < 288) state->lens[sym++] = 8;
+        next = fixed;
+        lenfix = next;
+        bits = 9;
+        inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+        /* distance table */
+        sym = 0;
+        while (sym < 32) state->lens[sym++] = 5;
+        distfix = next;
+        bits = 5;
+        inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+        /* do this just once */
+        virgin = 0;
+    }
+#else /* !BUILDFIXED */
+#   include "inffixed.h"
+#endif /* BUILDFIXED */
+    state->lencode = lenfix;
+    state->lenbits = 9;
+    state->distcode = distfix;
+    state->distbits = 5;
+}
+
+#ifdef MAKEFIXED
+#include <stdio.h>
+
+/*
+   Write out the inffixed.h that is #include'd above.  Defining MAKEFIXED also
+   defines BUILDFIXED, so the tables are built on the fly.  makefixed() writes
+   those tables to stdout, which would be piped to inffixed.h.  A small program
+   can simply call makefixed to do this:
+
+    void makefixed(void);
+
+    int main(void)
+    {
+        makefixed();
+        return 0;
+    }
+
+   Then that can be linked with zlib built with MAKEFIXED defined and run:
+
+    a.out > inffixed.h
+ */
+void makefixed()
+{
+    unsigned low, size;
+    struct inflate_state state;
+
+    fixedtables(&state);
+    puts("    /* inffixed.h -- table for decoding fixed codes");
+    puts("     * Generated automatically by makefixed().");
+    puts("     */");
+    puts("");
+    puts("    /* WARNING: this file should *not* be used by applications.");
+    puts("       It is part of the implementation of this library and is");
+    puts("       subject to change. Applications should only use zlib.h.");
+    puts("     */");
+    puts("");
+    size = 1U << 9;
+    printf("    static const code lenfix[%u] = {", size);
+    low = 0;
+    for (;;) {
+        if ((low % 7) == 0) printf("\n        ");
+        printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op,
+               state.lencode[low].bits, state.lencode[low].val);
+        if (++low == size) break;
+        putchar(',');
+    }
+    puts("\n    };");
+    size = 1U << 5;
+    printf("\n    static const code distfix[%u] = {", size);
+    low = 0;
+    for (;;) {
+        if ((low % 6) == 0) printf("\n        ");
+        printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits,
+               state.distcode[low].val);
+        if (++low == size) break;
+        putchar(',');
+    }
+    puts("\n    };");
+}
+#endif /* MAKEFIXED */
+
+/*
+   Update the window with the last wsize (normally 32K) bytes written before
+   returning.  If window does not exist yet, create it.  This is only called
+   when a window is already in use, or when output has been written during this
+   inflate call, but the end of the deflate stream has not been reached yet.
+   It is also called to create a window for dictionary data when a dictionary
+   is loaded.
+
+   Providing output buffers larger than 32K to inflate() should provide a speed
+   advantage, since only the last 32K of output is copied to the sliding window
+   upon return from inflate(), and since all distances after the first 32K of
+   output will fall in the output data, making match copies simpler and faster.
+   The advantage may be dependent on the size of the processor's data caches.
+ */
+local int updatewindow(strm, end, copy)
+z_streamp strm;
+const Bytef *end;
+unsigned copy;
+{
+    struct inflate_state FAR *state;
+    unsigned dist;
+
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* if it hasn't been done already, allocate space for the window */
+    if (state->window == Z_NULL) {
+        state->window = (unsigned char FAR *)
+                        ZALLOC(strm, 1U << state->wbits,
+                               sizeof(unsigned char));
+        if (state->window == Z_NULL) return 1;
+    }
+
+    /* if window not in use yet, initialize */
+    if (state->wsize == 0) {
+        state->wsize = 1U << state->wbits;
+        state->wnext = 0;
+        state->whave = 0;
+    }
+
+    /* copy state->wsize or less output bytes into the circular window */
+    if (copy >= state->wsize) {
+        zmemcpy(state->window, end - state->wsize, state->wsize);
+        state->wnext = 0;
+        state->whave = state->wsize;
+    }
+    else {
+        dist = state->wsize - state->wnext;
+        if (dist > copy) dist = copy;
+        zmemcpy(state->window + state->wnext, end - copy, dist);
+        copy -= dist;
+        if (copy) {
+            zmemcpy(state->window, end - copy, copy);
+            state->wnext = copy;
+            state->whave = state->wsize;
+        }
+        else {
+            state->wnext += dist;
+            if (state->wnext == state->wsize) state->wnext = 0;
+            if (state->whave < state->wsize) state->whave += dist;
+        }
+    }
+    return 0;
+}
+
+/* Macros for inflate(): */
+
+/* check function to use adler32() for zlib or crc32() for gzip */
+#ifdef GUNZIP
+#  define UPDATE(check, buf, len) \
+    (state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
+#else
+#  define UPDATE(check, buf, len) adler32(check, buf, len)
+#endif
+
+/* check macros for header crc */
+#ifdef GUNZIP
+#  define CRC2(check, word) \
+    do { \
+        hbuf[0] = (unsigned char)(word); \
+        hbuf[1] = (unsigned char)((word) >> 8); \
+        check = crc32(check, hbuf, 2); \
+    } while (0)
+
+#  define CRC4(check, word) \
+    do { \
+        hbuf[0] = (unsigned char)(word); \
+        hbuf[1] = (unsigned char)((word) >> 8); \
+        hbuf[2] = (unsigned char)((word) >> 16); \
+        hbuf[3] = (unsigned char)((word) >> 24); \
+        check = crc32(check, hbuf, 4); \
+    } while (0)
+#endif
+
+/* Load registers with state in inflate() for speed */
+#define LOAD() \
+    do { \
+        put = strm->next_out; \
+        left = strm->avail_out; \
+        next = strm->next_in; \
+        have = strm->avail_in; \
+        hold = state->hold; \
+        bits = state->bits; \
+    } while (0)
+
+/* Restore state from registers in inflate() */
+#define RESTORE() \
+    do { \
+        strm->next_out = put; \
+        strm->avail_out = left; \
+        strm->next_in = next; \
+        strm->avail_in = have; \
+        state->hold = hold; \
+        state->bits = bits; \
+    } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+    do { \
+        hold = 0; \
+        bits = 0; \
+    } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflate()
+   if there is no input available. */
+#define PULLBYTE() \
+    do { \
+        if (have == 0) goto inf_leave; \
+        have--; \
+        hold += (unsigned long)(*next++) << bits; \
+        bits += 8; \
+    } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator.  If there is
+   not enough available input to do that, then return from inflate(). */
+#define NEEDBITS(n) \
+    do { \
+        while (bits < (unsigned)(n)) \
+            PULLBYTE(); \
+    } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+    ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+    do { \
+        hold >>= (n); \
+        bits -= (unsigned)(n); \
+    } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+    do { \
+        hold >>= bits & 7; \
+        bits -= bits & 7; \
+    } while (0)
+
+/*
+   inflate() uses a state machine to process as much input data and generate as
+   much output data as possible before returning.  The state machine is
+   structured roughly as follows:
+
+    for (;;) switch (state) {
+    ...
+    case STATEn:
+        if (not enough input data or output space to make progress)
+            return;
+        ... make progress ...
+        state = STATEm;
+        break;
+    ...
+    }
+
+   so when inflate() is called again, the same case is attempted again, and
+   if the appropriate resources are provided, the machine proceeds to the
+   next state.  The NEEDBITS() macro is usually the way the state evaluates
+   whether it can proceed or should return.  NEEDBITS() does the return if
+   the requested bits are not available.  The typical use of the BITS macros
+   is:
+
+        NEEDBITS(n);
+        ... do something with BITS(n) ...
+        DROPBITS(n);
+
+   where NEEDBITS(n) either returns from inflate() if there isn't enough
+   input left to load n bits into the accumulator, or it continues.  BITS(n)
+   gives the low n bits in the accumulator.  When done, DROPBITS(n) drops
+   the low n bits off the accumulator.  INITBITS() clears the accumulator
+   and sets the number of available bits to zero.  BYTEBITS() discards just
+   enough bits to put the accumulator on a byte boundary.  After BYTEBITS()
+   and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
+
+   NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
+   if there is no input available.  The decoding of variable length codes uses
+   PULLBYTE() directly in order to pull just enough bytes to decode the next
+   code, and no more.
+
+   Some states loop until they get enough input, making sure that enough
+   state information is maintained to continue the loop where it left off
+   if NEEDBITS() returns in the loop.  For example, want, need, and keep
+   would all have to actually be part of the saved state in case NEEDBITS()
+   returns:
+
+    case STATEw:
+        while (want < need) {
+            NEEDBITS(n);
+            keep[want++] = BITS(n);
+            DROPBITS(n);
+        }
+        state = STATEx;
+    case STATEx:
+
+   As shown above, if the next state is also the next case, then the break
+   is omitted.
+
+   A state may also return if there is not enough output space available to
+   complete that state.  Those states are copying stored data, writing a
+   literal byte, and copying a matching string.
+
+   When returning, a "goto inf_leave" is used to update the total counters,
+   update the check value, and determine whether any progress has been made
+   during that inflate() call in order to return the proper return code.
+   Progress is defined as a change in either strm->avail_in or strm->avail_out.
+   When there is a window, goto inf_leave will update the window with the last
+   output written.  If a goto inf_leave occurs in the middle of decompression
+   and there is no window currently, goto inf_leave will create one and copy
+   output to the window for the next call of inflate().
+
+   In this implementation, the flush parameter of inflate() only affects the
+   return code (per zlib.h).  inflate() always writes as much as possible to
+   strm->next_out, given the space available and the provided input--the effect
+   documented in zlib.h of Z_SYNC_FLUSH.  Furthermore, inflate() always defers
+   the allocation of and copying into a sliding window until necessary, which
+   provides the effect documented in zlib.h for Z_FINISH when the entire input
+   stream available.  So the only thing the flush parameter actually does is:
+   when flush is set to Z_FINISH, inflate() cannot return Z_OK.  Instead it
+   will return Z_BUF_ERROR if it has not reached the end of the stream.
+ */
+
+int ZEXPORT inflate(strm, flush)
+z_streamp strm;
+int flush;
+{
+    struct inflate_state FAR *state;
+    z_const unsigned char FAR *next;    /* next input */
+    unsigned char FAR *put;     /* next output */
+    unsigned have, left;        /* available input and output */
+    unsigned long hold;         /* bit buffer */
+    unsigned bits;              /* bits in bit buffer */
+    unsigned in, out;           /* save starting available input and output */
+    unsigned copy;              /* number of stored or match bytes to copy */
+    unsigned char FAR *from;    /* where to copy match bytes from */
+    code here;                  /* current decoding table entry */
+    code last;                  /* parent table entry */
+    unsigned len;               /* length to copy for repeats, bits to drop */
+    int ret;                    /* return code */
+#ifdef GUNZIP
+    unsigned char hbuf[4];      /* buffer for gzip header crc calculation */
+#endif
+    static const unsigned short order[19] = /* permutation of code lengths */
+        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+    if (inflateStateCheck(strm) || strm->next_out == Z_NULL ||
+        (strm->next_in == Z_NULL && strm->avail_in != 0))
+        return Z_STREAM_ERROR;
+
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->mode == TYPE) state->mode = TYPEDO;      /* skip check */
+    LOAD();
+    in = have;
+    out = left;
+    ret = Z_OK;
+    for (;;)
+        switch (state->mode) {
+        case HEAD:
+            if (state->wrap == 0) {
+                state->mode = TYPEDO;
+                break;
+            }
+            NEEDBITS(16);
+#ifdef GUNZIP
+            if ((state->wrap & 2) && hold == 0x8b1f) {  /* gzip header */
+                if (state->wbits == 0)
+                    state->wbits = 15;
+                state->check = crc32(0L, Z_NULL, 0);
+                CRC2(state->check, hold);
+                INITBITS();
+                state->mode = FLAGS;
+                break;
+            }
+            state->flags = 0;           /* expect zlib header */
+            if (state->head != Z_NULL)
+                state->head->done = -1;
+            if (!(state->wrap & 1) ||   /* check if zlib header allowed */
+#else
+            if (
+#endif
+                ((BITS(8) << 8) + (hold >> 8)) % 31) {
+                strm->msg = (char *)"incorrect header check";
+                state->mode = BAD;
+                break;
+            }
+            if (BITS(4) != Z_DEFLATED) {
+                strm->msg = (char *)"unknown compression method";
+                state->mode = BAD;
+                break;
+            }
+            DROPBITS(4);
+            len = BITS(4) + 8;
+            if (state->wbits == 0)
+                state->wbits = len;
+            if (len > 15 || len > state->wbits) {
+                strm->msg = (char *)"invalid window size";
+                state->mode = BAD;
+                break;
+            }
+            state->dmax = 1U << len;
+            Tracev((stderr, "inflate:   zlib header ok\n"));
+            strm->adler = state->check = adler32(0L, Z_NULL, 0);
+            state->mode = hold & 0x200 ? DICTID : TYPE;
+            INITBITS();
+            break;
+#ifdef GUNZIP
+        case FLAGS:
+            NEEDBITS(16);
+            state->flags = (int)(hold);
+            if ((state->flags & 0xff) != Z_DEFLATED) {
+                strm->msg = (char *)"unknown compression method";
+                state->mode = BAD;
+                break;
+            }
+            if (state->flags & 0xe000) {
+                strm->msg = (char *)"unknown header flags set";
+                state->mode = BAD;
+                break;
+            }
+            if (state->head != Z_NULL)
+                state->head->text = (int)((hold >> 8) & 1);
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC2(state->check, hold);
+            INITBITS();
+            state->mode = TIME;
+        case TIME:
+            NEEDBITS(32);
+            if (state->head != Z_NULL)
+                state->head->time = hold;
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC4(state->check, hold);
+            INITBITS();
+            state->mode = OS;
+        case OS:
+            NEEDBITS(16);
+            if (state->head != Z_NULL) {
+                state->head->xflags = (int)(hold & 0xff);
+                state->head->os = (int)(hold >> 8);
+            }
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC2(state->check, hold);
+            INITBITS();
+            state->mode = EXLEN;
+        case EXLEN:
+            if (state->flags & 0x0400) {
+                NEEDBITS(16);
+                state->length = (unsigned)(hold);
+                if (state->head != Z_NULL)
+                    state->head->extra_len = (unsigned)hold;
+                if ((state->flags & 0x0200) && (state->wrap & 4))
+                    CRC2(state->check, hold);
+                INITBITS();
+            }
+            else if (state->head != Z_NULL)
+                state->head->extra = Z_NULL;
+            state->mode = EXTRA;
+        case EXTRA:
+            if (state->flags & 0x0400) {
+                copy = state->length;
+                if (copy > have) copy = have;
+                if (copy) {
+                    if (state->head != Z_NULL &&
+                        state->head->extra != Z_NULL) {
+                        len = state->head->extra_len - state->length;
+                        zmemcpy(state->head->extra + len, next,
+                                len + copy > state->head->extra_max ?
+                                state->head->extra_max - len : copy);
+                    }
+                    if ((state->flags & 0x0200) && (state->wrap & 4))
+                        state->check = crc32(state->check, next, copy);
+                    have -= copy;
+                    next += copy;
+                    state->length -= copy;
+                }
+                if (state->length) goto inf_leave;
+            }
+            state->length = 0;
+            state->mode = NAME;
+        case NAME:
+            if (state->flags & 0x0800) {
+                if (have == 0) goto inf_leave;
+                copy = 0;
+                do {
+                    len = (unsigned)(next[copy++]);
+                    if (state->head != Z_NULL &&
+                            state->head->name != Z_NULL &&
+                            state->length < state->head->name_max)
+                        state->head->name[state->length++] = (Bytef)len;
+                } while (len && copy < have);
+                if ((state->flags & 0x0200) && (state->wrap & 4))
+                    state->check = crc32(state->check, next, copy);
+                have -= copy;
+                next += copy;
+                if (len) goto inf_leave;
+            }
+            else if (state->head != Z_NULL)
+                state->head->name = Z_NULL;
+            state->length = 0;
+            state->mode = COMMENT;
+        case COMMENT:
+            if (state->flags & 0x1000) {
+                if (have == 0) goto inf_leave;
+                copy = 0;
+                do {
+                    len = (unsigned)(next[copy++]);
+                    if (state->head != Z_NULL &&
+                            state->head->comment != Z_NULL &&
+                            state->length < state->head->comm_max)
+                        state->head->comment[state->length++] = (Bytef)len;
+                } while (len && copy < have);
+                if ((state->flags & 0x0200) && (state->wrap & 4))
+                    state->check = crc32(state->check, next, copy);
+                have -= copy;
+                next += copy;
+                if (len) goto inf_leave;
+            }
+            else if (state->head != Z_NULL)
+                state->head->comment = Z_NULL;
+            state->mode = HCRC;
+        case HCRC:
+            if (state->flags & 0x0200) {
+                NEEDBITS(16);
+                if ((state->wrap & 4) && hold != (state->check & 0xffff)) {
+                    strm->msg = (char *)"header crc mismatch";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+            }
+            if (state->head != Z_NULL) {
+                state->head->hcrc = (int)((state->flags >> 9) & 1);
+                state->head->done = 1;
+            }
+            strm->adler = state->check = crc32(0L, Z_NULL, 0);
+            state->mode = TYPE;
+            break;
+#endif
+        case DICTID:
+            NEEDBITS(32);
+            strm->adler = state->check = ZSWAP32(hold);
+            INITBITS();
+            state->mode = DICT;
+        case DICT:
+            if (state->havedict == 0) {
+                RESTORE();
+                return Z_NEED_DICT;
+            }
+            strm->adler = state->check = adler32(0L, Z_NULL, 0);
+            state->mode = TYPE;
+        case TYPE:
+            if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave;
+        case TYPEDO:
+            if (state->last) {
+                BYTEBITS();
+                state->mode = CHECK;
+                break;
+            }
+            NEEDBITS(3);
+            state->last = BITS(1);
+            DROPBITS(1);
+            switch (BITS(2)) {
+            case 0:                             /* stored block */
+                Tracev((stderr, "inflate:     stored block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = STORED;
+                break;
+            case 1:                             /* fixed block */
+                fixedtables(state);
+                Tracev((stderr, "inflate:     fixed codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = LEN_;             /* decode codes */
+                if (flush == Z_TREES) {
+                    DROPBITS(2);
+                    goto inf_leave;
+                }
+                break;
+            case 2:                             /* dynamic block */
+                Tracev((stderr, "inflate:     dynamic codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = TABLE;
+                break;
+            case 3:
+                strm->msg = (char *)"invalid block type";
+                state->mode = BAD;
+            }
+            DROPBITS(2);
+            break;
+        case STORED:
+            BYTEBITS();                         /* go to byte boundary */
+            NEEDBITS(32);
+            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+                strm->msg = (char *)"invalid stored block lengths";
+                state->mode = BAD;
+                break;
+            }
+            state->length = (unsigned)hold & 0xffff;
+            Tracev((stderr, "inflate:       stored length %u\n",
+                    state->length));
+            INITBITS();
+            state->mode = COPY_;
+            if (flush == Z_TREES) goto inf_leave;
+        case COPY_:
+            state->mode = COPY;
+        case COPY:
+            copy = state->length;
+            if (copy) {
+                if (copy > have) copy = have;
+                if (copy > left) copy = left;
+                if (copy == 0) goto inf_leave;
+                zmemcpy(put, next, copy);
+                have -= copy;
+                next += copy;
+                left -= copy;
+                put += copy;
+                state->length -= copy;
+                break;
+            }
+            Tracev((stderr, "inflate:       stored end\n"));
+            state->mode = TYPE;
+            break;
+        case TABLE:
+            NEEDBITS(14);
+            state->nlen = BITS(5) + 257;
+            DROPBITS(5);
+            state->ndist = BITS(5) + 1;
+            DROPBITS(5);
+            state->ncode = BITS(4) + 4;
+            DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+            if (state->nlen > 286 || state->ndist > 30) {
+                strm->msg = (char *)"too many length or distance symbols";
+                state->mode = BAD;
+                break;
+            }
+#endif
+            Tracev((stderr, "inflate:       table sizes ok\n"));
+            state->have = 0;
+            state->mode = LENLENS;
+        case LENLENS:
+            while (state->have < state->ncode) {
+                NEEDBITS(3);
+                state->lens[order[state->have++]] = (unsigned short)BITS(3);
+                DROPBITS(3);
+            }
+            while (state->have < 19)
+                state->lens[order[state->have++]] = 0;
+            state->next = state->codes;
+            state->lencode = (const code FAR *)(state->next);
+            state->lenbits = 7;
+            ret = inflate_table(CODES, state->lens, 19, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid code lengths set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       code lengths ok\n"));
+            state->have = 0;
+            state->mode = CODELENS;
+        case CODELENS:
+            while (state->have < state->nlen + state->ndist) {
+                for (;;) {
+                    here = state->lencode[BITS(state->lenbits)];
+                    if ((unsigned)(here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                if (here.val < 16) {
+                    DROPBITS(here.bits);
+                    state->lens[state->have++] = here.val;
+                }
+                else {
+                    if (here.val == 16) {
+                        NEEDBITS(here.bits + 2);
+                        DROPBITS(here.bits);
+                        if (state->have == 0) {
+                            strm->msg = (char *)"invalid bit length repeat";
+                            state->mode = BAD;
+                            break;
+                        }
+                        len = state->lens[state->have - 1];
+                        copy = 3 + BITS(2);
+                        DROPBITS(2);
+                    }
+                    else if (here.val == 17) {
+                        NEEDBITS(here.bits + 3);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 3 + BITS(3);
+                        DROPBITS(3);
+                    }
+                    else {
+                        NEEDBITS(here.bits + 7);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 11 + BITS(7);
+                        DROPBITS(7);
+                    }
+                    if (state->have + copy > state->nlen + state->ndist) {
+                        strm->msg = (char *)"invalid bit length repeat";
+                        state->mode = BAD;
+                        break;
+                    }
+                    while (copy--)
+                        state->lens[state->have++] = (unsigned short)len;
+                }
+            }
+
+            /* handle error breaks in while */
+            if (state->mode == BAD) break;
+
+            /* check for end-of-block code (better have one) */
+            if (state->lens[256] == 0) {
+                strm->msg = (char *)"invalid code -- missing end-of-block";
+                state->mode = BAD;
+                break;
+            }
+
+            /* build code tables -- note: do not change the lenbits or distbits
+               values here (9 and 6) without reading the comments in inftrees.h
+               concerning the ENOUGH constants, which depend on those values */
+            state->next = state->codes;
+            state->lencode = (const code FAR *)(state->next);
+            state->lenbits = 9;
+            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid literal/lengths set";
+                state->mode = BAD;
+                break;
+            }
+            state->distcode = (const code FAR *)(state->next);
+            state->distbits = 6;
+            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+                            &(state->next), &(state->distbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid distances set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       codes ok\n"));
+            state->mode = LEN_;
+            if (flush == Z_TREES) goto inf_leave;
+        case LEN_:
+            state->mode = LEN;
+        case LEN:
+            if (have >= 6 && left >= 258) {
+                RESTORE();
+                inflate_fast(strm, out);
+                LOAD();
+                if (state->mode == TYPE)
+                    state->back = -1;
+                break;
+            }
+            state->back = 0;
+            for (;;) {
+                here = state->lencode[BITS(state->lenbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if (here.op && (here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->lencode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+                state->back += last.bits;
+            }
+            DROPBITS(here.bits);
+            state->back += here.bits;
+            state->length = (unsigned)here.val;
+            if ((int)(here.op) == 0) {
+                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                        "inflate:         literal '%c'\n" :
+                        "inflate:         literal 0x%02x\n", here.val));
+                state->mode = LIT;
+                break;
+            }
+            if (here.op & 32) {
+                Tracevv((stderr, "inflate:         end of block\n"));
+                state->back = -1;
+                state->mode = TYPE;
+                break;
+            }
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid literal/length code";
+                state->mode = BAD;
+                break;
+            }
+            state->extra = (unsigned)(here.op) & 15;
+            state->mode = LENEXT;
+        case LENEXT:
+            if (state->extra) {
+                NEEDBITS(state->extra);
+                state->length += BITS(state->extra);
+                DROPBITS(state->extra);
+                state->back += state->extra;
+            }
+            Tracevv((stderr, "inflate:         length %u\n", state->length));
+            state->was = state->length;
+            state->mode = DIST;
+        case DIST:
+            for (;;) {
+                here = state->distcode[BITS(state->distbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if ((here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->distcode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+                state->back += last.bits;
+            }
+            DROPBITS(here.bits);
+            state->back += here.bits;
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+            state->offset = (unsigned)here.val;
+            state->extra = (unsigned)(here.op) & 15;
+            state->mode = DISTEXT;
+        case DISTEXT:
+            if (state->extra) {
+                NEEDBITS(state->extra);
+                state->offset += BITS(state->extra);
+                DROPBITS(state->extra);
+                state->back += state->extra;
+            }
+#ifdef INFLATE_STRICT
+            if (state->offset > state->dmax) {
+                strm->msg = (char *)"invalid distance too far back";
+                state->mode = BAD;
+                break;
+            }
+#endif
+            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
+            state->mode = MATCH;
+        case MATCH:
+            if (left == 0) goto inf_leave;
+            copy = out - left;
+            if (state->offset > copy) {         /* copy from window */
+                copy = state->offset - copy;
+                if (copy > state->whave) {
+                    if (state->sane) {
+                        strm->msg = (char *)"invalid distance too far back";
+                        state->mode = BAD;
+                        break;
+                    }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+                    Trace((stderr, "inflate.c too far\n"));
+                    copy -= state->whave;
+                    if (copy > state->length) copy = state->length;
+                    if (copy > left) copy = left;
+                    left -= copy;
+                    state->length -= copy;
+                    do {
+                        *put++ = 0;
+                    } while (--copy);
+                    if (state->length == 0) state->mode = LEN;
+                    break;
+#endif
+                }
+                if (copy > state->wnext) {
+                    copy -= state->wnext;
+                    from = state->window + (state->wsize - copy);
+                }
+                else
+                    from = state->window + (state->wnext - copy);
+                if (copy > state->length) copy = state->length;
+            }
+            else {                              /* copy from output */
+                from = put - state->offset;
+                copy = state->length;
+            }
+            if (copy > left) copy = left;
+            left -= copy;
+            state->length -= copy;
+            do {
+                *put++ = *from++;
+            } while (--copy);
+            if (state->length == 0) state->mode = LEN;
+            break;
+        case LIT:
+            if (left == 0) goto inf_leave;
+            *put++ = (unsigned char)(state->length);
+            left--;
+            state->mode = LEN;
+            break;
+        case CHECK:
+            if (state->wrap) {
+                NEEDBITS(32);
+                out -= left;
+                strm->total_out += out;
+                state->total += out;
+                if ((state->wrap & 4) && out)
+                    strm->adler = state->check =
+                        UPDATE(state->check, put - out, out);
+                out = left;
+                if ((state->wrap & 4) && (
+#ifdef GUNZIP
+                     state->flags ? hold :
+#endif
+                     ZSWAP32(hold)) != state->check) {
+                    strm->msg = (char *)"incorrect data check";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+                Tracev((stderr, "inflate:   check matches trailer\n"));
+            }
+#ifdef GUNZIP
+            state->mode = LENGTH;
+        case LENGTH:
+            if (state->wrap && state->flags) {
+                NEEDBITS(32);
+                if (hold != (state->total & 0xffffffffUL)) {
+                    strm->msg = (char *)"incorrect length check";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+                Tracev((stderr, "inflate:   length matches trailer\n"));
+            }
+#endif
+            state->mode = DONE;
+        case DONE:
+            ret = Z_STREAM_END;
+            goto inf_leave;
+        case BAD:
+            ret = Z_DATA_ERROR;
+            goto inf_leave;
+        case MEM:
+            return Z_MEM_ERROR;
+        case SYNC:
+        default:
+            return Z_STREAM_ERROR;
+        }
+
+    /*
+       Return from inflate(), updating the total counts and the check value.
+       If there was no progress during the inflate() call, return a buffer
+       error.  Call updatewindow() to create and/or update the window state.
+       Note: a memory error from inflate() is non-recoverable.
+     */
+  inf_leave:
+    RESTORE();
+    if (state->wsize || (out != strm->avail_out && state->mode < BAD &&
+            (state->mode < CHECK || flush != Z_FINISH)))
+        if (updatewindow(strm, strm->next_out, out - strm->avail_out)) {
+            state->mode = MEM;
+            return Z_MEM_ERROR;
+        }
+    in -= strm->avail_in;
+    out -= strm->avail_out;
+    strm->total_in += in;
+    strm->total_out += out;
+    state->total += out;
+    if ((state->wrap & 4) && out)
+        strm->adler = state->check =
+            UPDATE(state->check, strm->next_out - out, out);
+    strm->data_type = (int)state->bits + (state->last ? 64 : 0) +
+                      (state->mode == TYPE ? 128 : 0) +
+                      (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0);
+    if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
+        ret = Z_BUF_ERROR;
+    return ret;
+}
+
+int ZEXPORT inflateEnd(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+    if (inflateStateCheck(strm))
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->window != Z_NULL) ZFREE(strm, state->window);
+    ZFREE(strm, strm->state);
+    strm->state = Z_NULL;
+    Tracev((stderr, "inflate: end\n"));
+    return Z_OK;
+}
+
+int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+Bytef *dictionary;
+uInt *dictLength;
+{
+    struct inflate_state FAR *state;
+
+    /* check state */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* copy dictionary */
+    if (state->whave && dictionary != Z_NULL) {
+        zmemcpy(dictionary, state->window + state->wnext,
+                state->whave - state->wnext);
+        zmemcpy(dictionary + state->whave - state->wnext,
+                state->window, state->wnext);
+    }
+    if (dictLength != Z_NULL)
+        *dictLength = state->whave;
+    return Z_OK;
+}
+
+int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+const Bytef *dictionary;
+uInt dictLength;
+{
+    struct inflate_state FAR *state;
+    unsigned long dictid;
+    int ret;
+
+    /* check state */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->wrap != 0 && state->mode != DICT)
+        return Z_STREAM_ERROR;
+
+    /* check for correct dictionary identifier */
+    if (state->mode == DICT) {
+        dictid = adler32(0L, Z_NULL, 0);
+        dictid = adler32(dictid, dictionary, dictLength);
+        if (dictid != state->check)
+            return Z_DATA_ERROR;
+    }
+
+    /* copy dictionary to window using updatewindow(), which will amend the
+       existing dictionary if appropriate */
+    ret = updatewindow(strm, dictionary + dictLength, dictLength);
+    if (ret) {
+        state->mode = MEM;
+        return Z_MEM_ERROR;
+    }
+    state->havedict = 1;
+    Tracev((stderr, "inflate:   dictionary set\n"));
+    return Z_OK;
+}
+
+int ZEXPORT inflateGetHeader(strm, head)
+z_streamp strm;
+gz_headerp head;
+{
+    struct inflate_state FAR *state;
+
+    /* check state */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
+
+    /* save header structure */
+    state->head = head;
+    head->done = 0;
+    return Z_OK;
+}
+
+/*
+   Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff.  Return when found
+   or when out of input.  When called, *have is the number of pattern bytes
+   found in order so far, in 0..3.  On return *have is updated to the new
+   state.  If on return *have equals four, then the pattern was found and the
+   return value is how many bytes were read including the last byte of the
+   pattern.  If *have is less than four, then the pattern has not been found
+   yet and the return value is len.  In the latter case, syncsearch() can be
+   called again with more data and the *have state.  *have is initialized to
+   zero for the first call.
+ */
+local unsigned syncsearch(have, buf, len)
+unsigned FAR *have;
+const unsigned char FAR *buf;
+unsigned len;
+{
+    unsigned got;
+    unsigned next;
+
+    got = *have;
+    next = 0;
+    while (next < len && got < 4) {
+        if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
+            got++;
+        else if (buf[next])
+            got = 0;
+        else
+            got = 4 - got;
+        next++;
+    }
+    *have = got;
+    return next;
+}
+
+int ZEXPORT inflateSync(strm)
+z_streamp strm;
+{
+    unsigned len;               /* number of bytes to look at or looked at */
+    unsigned long in, out;      /* temporary to save total_in and total_out */
+    unsigned char buf[4];       /* to restore bit buffer to byte string */
+    struct inflate_state FAR *state;
+
+    /* check parameters */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
+
+    /* if first time, start search in bit buffer */
+    if (state->mode != SYNC) {
+        state->mode = SYNC;
+        state->hold <<= state->bits & 7;
+        state->bits -= state->bits & 7;
+        len = 0;
+        while (state->bits >= 8) {
+            buf[len++] = (unsigned char)(state->hold);
+            state->hold >>= 8;
+            state->bits -= 8;
+        }
+        state->have = 0;
+        syncsearch(&(state->have), buf, len);
+    }
+
+    /* search available input */
+    len = syncsearch(&(state->have), strm->next_in, strm->avail_in);
+    strm->avail_in -= len;
+    strm->next_in += len;
+    strm->total_in += len;
+
+    /* return no joy or set up to restart inflate() on a new block */
+    if (state->have != 4) return Z_DATA_ERROR;
+    in = strm->total_in;  out = strm->total_out;
+    inflateReset(strm);
+    strm->total_in = in;  strm->total_out = out;
+    state->mode = TYPE;
+    return Z_OK;
+}
+
+/*
+   Returns true if inflate is currently at the end of a block generated by
+   Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+   implementation to provide an additional safety check. PPP uses
+   Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
+   block. When decompressing, PPP checks that at the end of input packet,
+   inflate is waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    return state->mode == STORED && state->bits == 0;
+}
+
+int ZEXPORT inflateCopy(dest, source)
+z_streamp dest;
+z_streamp source;
+{
+    struct inflate_state FAR *state;
+    struct inflate_state FAR *copy;
+    unsigned char FAR *window;
+    unsigned wsize;
+
+    /* check input */
+    if (inflateStateCheck(source) || dest == Z_NULL)
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)source->state;
+
+    /* allocate space */
+    copy = (struct inflate_state FAR *)
+           ZALLOC(source, 1, sizeof(struct inflate_state));
+    if (copy == Z_NULL) return Z_MEM_ERROR;
+    window = Z_NULL;
+    if (state->window != Z_NULL) {
+        window = (unsigned char FAR *)
+                 ZALLOC(source, 1U << state->wbits, sizeof(unsigned char));
+        if (window == Z_NULL) {
+            ZFREE(source, copy);
+            return Z_MEM_ERROR;
+        }
+    }
+
+    /* copy state */
+    zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
+    zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state));
+    copy->strm = dest;
+    if (state->lencode >= state->codes &&
+        state->lencode <= state->codes + ENOUGH - 1) {
+        copy->lencode = copy->codes + (state->lencode - state->codes);
+        copy->distcode = copy->codes + (state->distcode - state->codes);
+    }
+    copy->next = copy->codes + (state->next - state->codes);
+    if (window != Z_NULL) {
+        wsize = 1U << state->wbits;
+        zmemcpy(window, state->window, wsize);
+    }
+    copy->window = window;
+    dest->state = (struct internal_state FAR *)copy;
+    return Z_OK;
+}
+
+int ZEXPORT inflateUndermine(strm, subvert)
+z_streamp strm;
+int subvert;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+    state->sane = !subvert;
+    return Z_OK;
+#else
+    (void)subvert;
+    state->sane = 1;
+    return Z_DATA_ERROR;
+#endif
+}
+
+int ZEXPORT inflateValidate(strm, check)
+z_streamp strm;
+int check;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (check)
+        state->wrap |= 4;
+    else
+        state->wrap &= ~4;
+    return Z_OK;
+}
+
+long ZEXPORT inflateMark(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm))
+        return -(1L << 16);
+    state = (struct inflate_state FAR *)strm->state;
+    return (long)(((unsigned long)((long)state->back)) << 16) +
+        (state->mode == COPY ? state->length :
+            (state->mode == MATCH ? state->was - state->length : 0));
+}
+
+unsigned long ZEXPORT inflateCodesUsed(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+    if (inflateStateCheck(strm)) return (unsigned long)-1;
+    state = (struct inflate_state FAR *)strm->state;
+    return (unsigned long)(state->next - state->codes);
+}
diff --git a/lib/zlib/inflate.h b/lib/zlib/inflate.h
new file mode 100644
index 0000000..a46cce6
--- /dev/null
+++ b/lib/zlib/inflate.h
@@ -0,0 +1,125 @@
+/* inflate.h -- internal inflate state definition
+ * Copyright (C) 1995-2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+   trailer decoding by inflate().  NO_GZIP would be used to avoid linking in
+   the crc code when it is not needed.  For shared libraries, gzip decoding
+   should be left enabled. */
+#ifndef NO_GZIP
+#  define GUNZIP
+#endif
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+    HEAD = 16180,   /* i: waiting for magic header */
+    FLAGS,      /* i: waiting for method and flags (gzip) */
+    TIME,       /* i: waiting for modification time (gzip) */
+    OS,         /* i: waiting for extra flags and operating system (gzip) */
+    EXLEN,      /* i: waiting for extra length (gzip) */
+    EXTRA,      /* i: waiting for extra bytes (gzip) */
+    NAME,       /* i: waiting for end of file name (gzip) */
+    COMMENT,    /* i: waiting for end of comment (gzip) */
+    HCRC,       /* i: waiting for header crc (gzip) */
+    DICTID,     /* i: waiting for dictionary check value */
+    DICT,       /* waiting for inflateSetDictionary() call */
+        TYPE,       /* i: waiting for type bits, including last-flag bit */
+        TYPEDO,     /* i: same, but skip check to exit inflate on new block */
+        STORED,     /* i: waiting for stored size (length and complement) */
+        COPY_,      /* i/o: same as COPY below, but only first time in */
+        COPY,       /* i/o: waiting for input or output to copy stored block */
+        TABLE,      /* i: waiting for dynamic block table lengths */
+        LENLENS,    /* i: waiting for code length code lengths */
+        CODELENS,   /* i: waiting for length/lit and distance code lengths */
+            LEN_,       /* i: same as LEN below, but only first time in */
+            LEN,        /* i: waiting for length/lit/eob code */
+            LENEXT,     /* i: waiting for length extra bits */
+            DIST,       /* i: waiting for distance code */
+            DISTEXT,    /* i: waiting for distance extra bits */
+            MATCH,      /* o: waiting for output space to copy string */
+            LIT,        /* o: waiting for output space to write literal */
+    CHECK,      /* i: waiting for 32-bit check value */
+    LENGTH,     /* i: waiting for 32-bit length (gzip) */
+    DONE,       /* finished check, done -- remain here until reset */
+    BAD,        /* got a data error -- remain here until reset */
+    MEM,        /* got an inflate() memory error -- remain here until reset */
+    SYNC        /* looking for synchronization bytes to restart inflate() */
+} inflate_mode;
+
+/*
+    State transitions between above modes -
+
+    (most modes can go to BAD or MEM on error -- not shown for clarity)
+
+    Process header:
+        HEAD -> (gzip) or (zlib) or (raw)
+        (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
+                  HCRC -> TYPE
+        (zlib) -> DICTID or TYPE
+        DICTID -> DICT -> TYPE
+        (raw) -> TYPEDO
+    Read deflate blocks:
+            TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
+            STORED -> COPY_ -> COPY -> TYPE
+            TABLE -> LENLENS -> CODELENS -> LEN_
+            LEN_ -> LEN
+    Read deflate codes in fixed or dynamic block:
+                LEN -> LENEXT or LIT or TYPE
+                LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
+                LIT -> LEN
+    Process trailer:
+        CHECK -> LENGTH -> DONE
+ */
+
+/* State maintained between inflate() calls -- approximately 7K bytes, not
+   including the allocated sliding window, which is up to 32K bytes. */
+struct inflate_state {
+    z_streamp strm;             /* pointer back to this zlib stream */
+    inflate_mode mode;          /* current inflate mode */
+    int last;                   /* true if processing last block */
+    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip,
+                                   bit 2 true to validate check value */
+    int havedict;               /* true if dictionary provided */
+    int flags;                  /* gzip header method and flags (0 if zlib) */
+    unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
+    unsigned long check;        /* protected copy of check value */
+    unsigned long total;        /* protected copy of output count */
+    gz_headerp head;            /* where to save gzip header information */
+        /* sliding window */
+    unsigned wbits;             /* log base 2 of requested window size */
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned wnext;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if needed */
+        /* bit accumulator */
+    unsigned long hold;         /* input bit accumulator */
+    unsigned bits;              /* number of bits in "in" */
+        /* for string and stored block copying */
+    unsigned length;            /* literal or length of data to copy */
+    unsigned offset;            /* distance back to copy string from */
+        /* for table and code decoding */
+    unsigned extra;             /* extra bits needed */
+        /* fixed and dynamic code tables */
+    code const FAR *lencode;    /* starting table for length/literal codes */
+    code const FAR *distcode;   /* starting table for distance codes */
+    unsigned lenbits;           /* index bits for lencode */
+    unsigned distbits;          /* index bits for distcode */
+        /* dynamic table building */
+    unsigned ncode;             /* number of code length code lengths */
+    unsigned nlen;              /* number of length code lengths */
+    unsigned ndist;             /* number of distance code lengths */
+    unsigned have;              /* number of code lengths in lens[] */
+    code FAR *next;             /* next available space in codes[] */
+    unsigned short lens[320];   /* temporary storage for code lengths */
+    unsigned short work[288];   /* work area for code table building */
+    code codes[ENOUGH];         /* space for code tables */
+    int sane;                   /* if false, allow invalid distance too far */
+    int back;                   /* bits back of last unprocessed length/lit */
+    unsigned was;               /* initial length of match */
+};
diff --git a/lib/zlib/inftrees.c b/lib/zlib/inftrees.c
new file mode 100644
index 0000000..2ea08fc
--- /dev/null
+++ b/lib/zlib/inftrees.c
@@ -0,0 +1,304 @@
+/* inftrees.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2017 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+
+#define MAXBITS 15
+
+const char inflate_copyright[] =
+   " inflate 1.2.11 Copyright 1995-2017 Mark Adler ";
+/*
+  If you use the zlib library in a product, an acknowledgment is welcome
+  in the documentation of your product. If for some reason you cannot
+  include such an acknowledgment, I would appreciate that you keep this
+  copyright string in the executable of your product.
+ */
+
+/*
+   Build a set of tables to decode the provided canonical Huffman code.
+   The code lengths are lens[0..codes-1].  The result starts at *table,
+   whose indices are 0..2^bits-1.  work is a writable array of at least
+   lens shorts, which is used as a work area.  type is the type of code
+   to be generated, CODES, LENS, or DISTS.  On return, zero is success,
+   -1 is an invalid code, and +1 means that ENOUGH isn't enough.  table
+   on return points to the next available entry's address.  bits is the
+   requested root table index bits, and on return it is the actual root
+   table index bits.  It will differ if the request is greater than the
+   longest code or if it is less than the shortest code.
+ */
+int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
+codetype type;
+unsigned short FAR *lens;
+unsigned codes;
+code FAR * FAR *table;
+unsigned FAR *bits;
+unsigned short FAR *work;
+{
+    unsigned len;               /* a code's length in bits */
+    unsigned sym;               /* index of code symbols */
+    unsigned min, max;          /* minimum and maximum code lengths */
+    unsigned root;              /* number of index bits for root table */
+    unsigned curr;              /* number of index bits for current table */
+    unsigned drop;              /* code bits to drop for sub-table */
+    int left;                   /* number of prefix codes available */
+    unsigned used;              /* code entries in table used */
+    unsigned huff;              /* Huffman code */
+    unsigned incr;              /* for incrementing code, index */
+    unsigned fill;              /* index for replicating entries */
+    unsigned low;               /* low bits for current root entry */
+    unsigned mask;              /* mask for low root bits */
+    code here;                  /* table entry for duplication */
+    code FAR *next;             /* next available space in table */
+    const unsigned short FAR *base;     /* base value table to use */
+    const unsigned short FAR *extra;    /* extra bits table to use */
+    unsigned match;             /* use base and extra for symbol >= match */
+    unsigned short count[MAXBITS+1];    /* number of codes of each length */
+    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
+    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+        16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 202};
+    static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
+        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+        8193, 12289, 16385, 24577, 0, 0};
+    static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
+        16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+        23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+        28, 28, 29, 29, 64, 64};
+
+    /*
+       Process a set of code lengths to create a canonical Huffman code.  The
+       code lengths are lens[0..codes-1].  Each length corresponds to the
+       symbols 0..codes-1.  The Huffman code is generated by first sorting the
+       symbols by length from short to long, and retaining the symbol order
+       for codes with equal lengths.  Then the code starts with all zero bits
+       for the first code of the shortest length, and the codes are integer
+       increments for the same length, and zeros are appended as the length
+       increases.  For the deflate format, these bits are stored backwards
+       from their more natural integer increment ordering, and so when the
+       decoding tables are built in the large loop below, the integer codes
+       are incremented backwards.
+
+       This routine assumes, but does not check, that all of the entries in
+       lens[] are in the range 0..MAXBITS.  The caller must assure this.
+       1..MAXBITS is interpreted as that code length.  zero means that that
+       symbol does not occur in this code.
+
+       The codes are sorted by computing a count of codes for each length,
+       creating from that a table of starting indices for each length in the
+       sorted table, and then entering the symbols in order in the sorted
+       table.  The sorted table is work[], with that space being provided by
+       the caller.
+
+       The length counts are used for other purposes as well, i.e. finding
+       the minimum and maximum length codes, determining if there are any
+       codes at all, checking for a valid set of lengths, and looking ahead
+       at length counts to determine sub-table sizes when building the
+       decoding tables.
+     */
+
+    /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+    for (len = 0; len <= MAXBITS; len++)
+        count[len] = 0;
+    for (sym = 0; sym < codes; sym++)
+        count[lens[sym]]++;
+
+    /* bound code lengths, force root to be within code lengths */
+    root = *bits;
+    for (max = MAXBITS; max >= 1; max--)
+        if (count[max] != 0) break;
+    if (root > max) root = max;
+    if (max == 0) {                     /* no symbols to code at all */
+        here.op = (unsigned char)64;    /* invalid code marker */
+        here.bits = (unsigned char)1;
+        here.val = (unsigned short)0;
+        *(*table)++ = here;             /* make a table to force an error */
+        *(*table)++ = here;
+        *bits = 1;
+        return 0;     /* no symbols, but wait for decoding to report error */
+    }
+    for (min = 1; min < max; min++)
+        if (count[min] != 0) break;
+    if (root < min) root = min;
+
+    /* check for an over-subscribed or incomplete set of lengths */
+    left = 1;
+    for (len = 1; len <= MAXBITS; len++) {
+        left <<= 1;
+        left -= count[len];
+        if (left < 0) return -1;        /* over-subscribed */
+    }
+    if (left > 0 && (type == CODES || max != 1))
+        return -1;                      /* incomplete set */
+
+    /* generate offsets into symbol table for each length for sorting */
+    offs[1] = 0;
+    for (len = 1; len < MAXBITS; len++)
+        offs[len + 1] = offs[len] + count[len];
+
+    /* sort symbols by length, by symbol order within each length */
+    for (sym = 0; sym < codes; sym++)
+        if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+    /*
+       Create and fill in decoding tables.  In this loop, the table being
+       filled is at next and has curr index bits.  The code being used is huff
+       with length len.  That code is converted to an index by dropping drop
+       bits off of the bottom.  For codes where len is less than drop + curr,
+       those top drop + curr - len bits are incremented through all values to
+       fill the table with replicated entries.
+
+       root is the number of index bits for the root table.  When len exceeds
+       root, sub-tables are created pointed to by the root entry with an index
+       of the low root bits of huff.  This is saved in low to check for when a
+       new sub-table should be started.  drop is zero when the root table is
+       being filled, and drop is root when sub-tables are being filled.
+
+       When a new sub-table is needed, it is necessary to look ahead in the
+       code lengths to determine what size sub-table is needed.  The length
+       counts are used for this, and so count[] is decremented as codes are
+       entered in the tables.
+
+       used keeps track of how many table entries have been allocated from the
+       provided *table space.  It is checked for LENS and DIST tables against
+       the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+       the initial root table size constants.  See the comments in inftrees.h
+       for more information.
+
+       sym increments through all symbols, and the loop terminates when
+       all codes of length max, i.e. all codes, have been processed.  This
+       routine permits incomplete codes, so another loop after this one fills
+       in the rest of the decoding tables with invalid code markers.
+     */
+
+    /* set up for code type */
+    switch (type) {
+    case CODES:
+        base = extra = work;    /* dummy value--not used */
+        match = 20;
+        break;
+    case LENS:
+        base = lbase;
+        extra = lext;
+        match = 257;
+        break;
+    default:    /* DISTS */
+        base = dbase;
+        extra = dext;
+        match = 0;
+    }
+
+    /* initialize state for loop */
+    huff = 0;                   /* starting code */
+    sym = 0;                    /* starting code symbol */
+    len = min;                  /* starting code length */
+    next = *table;              /* current table to fill in */
+    curr = root;                /* current table index bits */
+    drop = 0;                   /* current bits to drop from code for index */
+    low = (unsigned)(-1);       /* trigger new sub-table when len > root */
+    used = 1U << root;          /* use root table entries */
+    mask = used - 1;            /* mask for comparing low */
+
+    /* check available table space */
+    if ((type == LENS && used > ENOUGH_LENS) ||
+        (type == DISTS && used > ENOUGH_DISTS))
+        return 1;
+
+    /* process all codes and make table entries */
+    for (;;) {
+        /* create table entry */
+        here.bits = (unsigned char)(len - drop);
+        if (work[sym] + 1U < match) {
+            here.op = (unsigned char)0;
+            here.val = work[sym];
+        }
+        else if (work[sym] >= match) {
+            here.op = (unsigned char)(extra[work[sym] - match]);
+            here.val = base[work[sym] - match];
+        }
+        else {
+            here.op = (unsigned char)(32 + 64);         /* end of block */
+            here.val = 0;
+        }
+
+        /* replicate for those indices with low len bits equal to huff */
+        incr = 1U << (len - drop);
+        fill = 1U << curr;
+        min = fill;                 /* save offset to next table */
+        do {
+            fill -= incr;
+            next[(huff >> drop) + fill] = here;
+        } while (fill != 0);
+
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
+        }
+        else
+            huff = 0;
+
+        /* go to next symbol, update count, len */
+        sym++;
+        if (--(count[len]) == 0) {
+            if (len == max) break;
+            len = lens[work[sym]];
+        }
+
+        /* create new sub-table if needed */
+        if (len > root && (huff & mask) != low) {
+            /* if first time, transition to sub-tables */
+            if (drop == 0)
+                drop = root;
+
+            /* increment past last table */
+            next += min;            /* here min is 1 << curr */
+
+            /* determine length of next table */
+            curr = len - drop;
+            left = (int)(1 << curr);
+            while (curr + drop < max) {
+                left -= count[curr + drop];
+                if (left <= 0) break;
+                curr++;
+                left <<= 1;
+            }
+
+            /* check for enough space */
+            used += 1U << curr;
+            if ((type == LENS && used > ENOUGH_LENS) ||
+                (type == DISTS && used > ENOUGH_DISTS))
+                return 1;
+
+            /* point entry in root table to sub-table */
+            low = huff & mask;
+            (*table)[low].op = (unsigned char)curr;
+            (*table)[low].bits = (unsigned char)root;
+            (*table)[low].val = (unsigned short)(next - *table);
+        }
+    }
+
+    /* fill in remaining table entry if code is incomplete (guaranteed to have
+       at most one remaining entry, since if the code is incomplete, the
+       maximum code length that was allowed to get this far is one bit) */
+    if (huff != 0) {
+        here.op = (unsigned char)64;            /* invalid code marker */
+        here.bits = (unsigned char)(len - drop);
+        here.val = (unsigned short)0;
+        next[huff] = here;
+    }
+
+    /* set return parameters */
+    *table += used;
+    *bits = root;
+    return 0;
+}
diff --git a/lib/zlib/inftrees.h b/lib/zlib/inftrees.h
new file mode 100644
index 0000000..baa53a0
--- /dev/null
+++ b/lib/zlib/inftrees.h
@@ -0,0 +1,62 @@
+/* inftrees.h -- header to use inftrees.c
+ * Copyright (C) 1995-2005, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* Structure for decoding tables.  Each entry provides either the
+   information needed to do the operation requested by the code that
+   indexed that table entry, or it provides a pointer to another
+   table that indexes more bits of the code.  op indicates whether
+   the entry is a pointer to another table, a literal, a length or
+   distance, an end-of-block, or an invalid code.  For a table
+   pointer, the low four bits of op is the number of index bits of
+   that table.  For a length or distance, the low four bits of op
+   is the number of extra bits to get after the code.  bits is
+   the number of bits in this code or part of the code to drop off
+   of the bit buffer.  val is the actual byte to output in the case
+   of a literal, the base length or distance, or the offset from
+   the current table to the next table.  Each entry is four bytes. */
+typedef struct {
+    unsigned char op;           /* operation, extra bits, table bits */
+    unsigned char bits;         /* bits in this part of the code */
+    unsigned short val;         /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+    00000000 - literal
+    0000tttt - table link, tttt != 0 is the number of table index bits
+    0001eeee - length or distance, eeee is the number of extra bits
+    01100000 - end of block
+    01000000 - invalid code
+ */
+
+/* Maximum size of the dynamic table.  The maximum number of code structures is
+   1444, which is the sum of 852 for literal/length codes and 592 for distance
+   codes.  These values were found by exhaustive searches using the program
+   examples/enough.c found in the zlib distribtution.  The arguments to that
+   program are the number of symbols, the initial root table size, and the
+   maximum bit length of a code.  "enough 286 9 15" for literal/length codes
+   returns returns 852, and "enough 30 6 15" for distance codes returns 592.
+   The initial root table size (9 or 6) is found in the fifth argument of the
+   inflate_table() calls in inflate.c and infback.c.  If the root table size is
+   changed, then these maximum sizes would be need to be recalculated and
+   updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 592
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
+
+/* Type of code to build for inflate_table() */
+typedef enum {
+    CODES,
+    LENS,
+    DISTS
+} codetype;
+
+int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
+                             unsigned codes, code FAR * FAR *table,
+                             unsigned FAR *bits, unsigned short FAR *work));
diff --git a/lib/zlib/tf_gunzip.c b/lib/zlib/tf_gunzip.c
new file mode 100644
index 0000000..f07c380
--- /dev/null
+++ b/lib/zlib/tf_gunzip.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <debug.h>
+#include <errno.h>
+#include <string.h>
+#include <tf_gunzip.h>
+#include <utils.h>
+
+#include "zutil.h"
+
+/*
+ * memory allocated by malloc() is supposed to be aligned for any built-in type
+ */
+#define ZALLOC_ALIGNMENT	sizeof(void *)
+
+static uintptr_t zalloc_start;
+static uintptr_t zalloc_end;
+static uintptr_t zalloc_current;
+
+static void * ZLIB_INTERNAL zcalloc(void *opaque, unsigned int items,
+				    unsigned int size)
+{
+	uintptr_t p, p_end;
+
+	size *= items;
+
+	p = round_up(zalloc_current, ZALLOC_ALIGNMENT);
+	p_end = p + size;
+
+	if (p_end > zalloc_end)
+		return NULL;
+
+	memset((void *)p, 0, size);
+
+	zalloc_current = p_end;
+
+	return (void *)p;
+}
+
+static void ZLIB_INTERNAL zfree(void *opaque, void *ptr)
+{
+}
+
+/*
+ * gunzip - decompress gzip data
+ * @in_buf: source of compressed input. Upon exit, the end of input.
+ * @in_len: length of in_buf
+ * @out_buf: destination of decompressed output. Upon exit, the end of output.
+ * @out_len: length of out_buf
+ * @work_buf: workspace
+ * @work_len: length of workspace
+ */
+int gunzip(uintptr_t *in_buf, size_t in_len, uintptr_t *out_buf,
+	   size_t out_len, uintptr_t work_buf, size_t work_len)
+{
+	z_stream stream;
+	int zret, ret;
+
+	zalloc_start = work_buf;
+	zalloc_end = work_buf + work_len;
+	zalloc_current = zalloc_start;
+
+	stream.next_in = (typeof(stream.next_in))*in_buf;
+	stream.avail_in = in_len;
+	stream.next_out = (typeof(stream.next_out))*out_buf;
+	stream.avail_out = out_len;
+	stream.zalloc = zcalloc;
+	stream.zfree = zfree;
+	stream.opaque = (voidpf)0;
+
+	zret = inflateInit(&stream);
+	if (zret != Z_OK) {
+		ERROR("zlib: inflate init failed (ret = %d)\n", zret);
+		return (zret == Z_MEM_ERROR) ? -ENOMEM : -EIO;
+	}
+
+	zret = inflate(&stream, Z_NO_FLUSH);
+	if (zret == Z_STREAM_END) {
+		ret = 0;
+	} else {
+		if (stream.msg)
+			ERROR("%s\n", stream.msg);
+		ERROR("zlib: inflate failed (ret = %d)\n", zret);
+		ret = (zret == Z_MEM_ERROR) ? -ENOMEM : -EIO;
+	}
+
+	VERBOSE("zlib: %d byte input\n", stream.total_in);
+	VERBOSE("zlib: %d byte output\n", stream.total_out);
+
+	*in_buf = (uintptr_t)stream.next_in;
+	*out_buf = (uintptr_t)stream.next_out;
+
+	inflateEnd(&stream);
+
+	return ret;
+}
diff --git a/lib/zlib/zconf.h b/lib/zlib/zconf.h
new file mode 100644
index 0000000..5e1d68a
--- /dev/null
+++ b/lib/zlib/zconf.h
@@ -0,0 +1,534 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
+ */
+#ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET
+
+/* all linked symbols and init macros */
+#  define _dist_code            z__dist_code
+#  define _length_code          z__length_code
+#  define _tr_align             z__tr_align
+#  define _tr_flush_bits        z__tr_flush_bits
+#  define _tr_flush_block       z__tr_flush_block
+#  define _tr_init              z__tr_init
+#  define _tr_stored_block      z__tr_stored_block
+#  define _tr_tally             z__tr_tally
+#  define adler32               z_adler32
+#  define adler32_combine       z_adler32_combine
+#  define adler32_combine64     z_adler32_combine64
+#  define adler32_z             z_adler32_z
+#  ifndef Z_SOLO
+#    define compress              z_compress
+#    define compress2             z_compress2
+#    define compressBound         z_compressBound
+#  endif
+#  define crc32                 z_crc32
+#  define crc32_combine         z_crc32_combine
+#  define crc32_combine64       z_crc32_combine64
+#  define crc32_z               z_crc32_z
+#  define deflate               z_deflate
+#  define deflateBound          z_deflateBound
+#  define deflateCopy           z_deflateCopy
+#  define deflateEnd            z_deflateEnd
+#  define deflateGetDictionary  z_deflateGetDictionary
+#  define deflateInit           z_deflateInit
+#  define deflateInit2          z_deflateInit2
+#  define deflateInit2_         z_deflateInit2_
+#  define deflateInit_          z_deflateInit_
+#  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
+#  define deflatePrime          z_deflatePrime
+#  define deflateReset          z_deflateReset
+#  define deflateResetKeep      z_deflateResetKeep
+#  define deflateSetDictionary  z_deflateSetDictionary
+#  define deflateSetHeader      z_deflateSetHeader
+#  define deflateTune           z_deflateTune
+#  define deflate_copyright     z_deflate_copyright
+#  define get_crc_table         z_get_crc_table
+#  ifndef Z_SOLO
+#    define gz_error              z_gz_error
+#    define gz_intmax             z_gz_intmax
+#    define gz_strwinerror        z_gz_strwinerror
+#    define gzbuffer              z_gzbuffer
+#    define gzclearerr            z_gzclearerr
+#    define gzclose               z_gzclose
+#    define gzclose_r             z_gzclose_r
+#    define gzclose_w             z_gzclose_w
+#    define gzdirect              z_gzdirect
+#    define gzdopen               z_gzdopen
+#    define gzeof                 z_gzeof
+#    define gzerror               z_gzerror
+#    define gzflush               z_gzflush
+#    define gzfread               z_gzfread
+#    define gzfwrite              z_gzfwrite
+#    define gzgetc                z_gzgetc
+#    define gzgetc_               z_gzgetc_
+#    define gzgets                z_gzgets
+#    define gzoffset              z_gzoffset
+#    define gzoffset64            z_gzoffset64
+#    define gzopen                z_gzopen
+#    define gzopen64              z_gzopen64
+#    ifdef _WIN32
+#      define gzopen_w              z_gzopen_w
+#    endif
+#    define gzprintf              z_gzprintf
+#    define gzputc                z_gzputc
+#    define gzputs                z_gzputs
+#    define gzread                z_gzread
+#    define gzrewind              z_gzrewind
+#    define gzseek                z_gzseek
+#    define gzseek64              z_gzseek64
+#    define gzsetparams           z_gzsetparams
+#    define gztell                z_gztell
+#    define gztell64              z_gztell64
+#    define gzungetc              z_gzungetc
+#    define gzvprintf             z_gzvprintf
+#    define gzwrite               z_gzwrite
+#  endif
+#  define inflate               z_inflate
+#  define inflateBack           z_inflateBack
+#  define inflateBackEnd        z_inflateBackEnd
+#  define inflateBackInit       z_inflateBackInit
+#  define inflateBackInit_      z_inflateBackInit_
+#  define inflateCodesUsed      z_inflateCodesUsed
+#  define inflateCopy           z_inflateCopy
+#  define inflateEnd            z_inflateEnd
+#  define inflateGetDictionary  z_inflateGetDictionary
+#  define inflateGetHeader      z_inflateGetHeader
+#  define inflateInit           z_inflateInit
+#  define inflateInit2          z_inflateInit2
+#  define inflateInit2_         z_inflateInit2_
+#  define inflateInit_          z_inflateInit_
+#  define inflateMark           z_inflateMark
+#  define inflatePrime          z_inflatePrime
+#  define inflateReset          z_inflateReset
+#  define inflateReset2         z_inflateReset2
+#  define inflateResetKeep      z_inflateResetKeep
+#  define inflateSetDictionary  z_inflateSetDictionary
+#  define inflateSync           z_inflateSync
+#  define inflateSyncPoint      z_inflateSyncPoint
+#  define inflateUndermine      z_inflateUndermine
+#  define inflateValidate       z_inflateValidate
+#  define inflate_copyright     z_inflate_copyright
+#  define inflate_fast          z_inflate_fast
+#  define inflate_table         z_inflate_table
+#  ifndef Z_SOLO
+#    define uncompress            z_uncompress
+#    define uncompress2           z_uncompress2
+#  endif
+#  define zError                z_zError
+#  ifndef Z_SOLO
+#    define zcalloc               z_zcalloc
+#    define zcfree                z_zcfree
+#  endif
+#  define zlibCompileFlags      z_zlibCompileFlags
+#  define zlibVersion           z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+#  define Byte                  z_Byte
+#  define Bytef                 z_Bytef
+#  define alloc_func            z_alloc_func
+#  define charf                 z_charf
+#  define free_func             z_free_func
+#  ifndef Z_SOLO
+#    define gzFile                z_gzFile
+#  endif
+#  define gz_header             z_gz_header
+#  define gz_headerp            z_gz_headerp
+#  define in_func               z_in_func
+#  define intf                  z_intf
+#  define out_func              z_out_func
+#  define uInt                  z_uInt
+#  define uIntf                 z_uIntf
+#  define uLong                 z_uLong
+#  define uLongf                z_uLongf
+#  define voidp                 z_voidp
+#  define voidpc                z_voidpc
+#  define voidpf                z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+#  define gz_header_s           z_gz_header_s
+#  define internal_state        z_internal_state
+
+#endif
+
+#if defined(__MSDOS__) && !defined(MSDOS)
+#  define MSDOS
+#endif
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+#  define OS2
+#endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+#  define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+#  ifndef WIN32
+#    define WIN32
+#  endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+#    ifndef SYS16BIT
+#      define SYS16BIT
+#    endif
+#  endif
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#ifdef SYS16BIT
+#  define MAXSEG_64K
+#endif
+#ifdef MSDOS
+#  define UNALIGNED_OK
+#endif
+
+#ifdef __STDC_VERSION__
+#  ifndef STDC
+#    define STDC
+#  endif
+#  if __STDC_VERSION__ >= 199901L
+#    ifndef STDC99
+#      define STDC99
+#    endif
+#  endif
+#endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+#  define STDC
+#endif
+
+#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
+#  define STDC
+#endif
+
+#ifndef STDC
+#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+#    define const       /* note: need a more gentle solution here */
+#  endif
+#endif
+
+#if defined(ZLIB_CONST) && !defined(z_const)
+#  define z_const const
+#else
+#  define z_const
+#endif
+
+#ifdef Z_SOLO
+   typedef unsigned long z_size_t;
+#else
+#  define z_longlong long long
+#  if defined(NO_SIZE_T)
+     typedef unsigned NO_SIZE_T z_size_t;
+#  elif defined(STDC)
+#    include <stddef.h>
+     typedef size_t z_size_t;
+#  else
+     typedef unsigned long z_size_t;
+#  endif
+#  undef z_longlong
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
+#    define MAX_MEM_LEVEL 8
+#  else
+#    define MAX_MEM_LEVEL 9
+#  endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus about 7 kilobytes
+ for small objects.
+*/
+
+                        /* Type declarations */
+
+#ifndef OF /* function prototypes */
+#  ifdef STDC
+#    define OF(args)  args
+#  else
+#    define OF(args)  ()
+#  endif
+#endif
+
+#ifndef Z_ARG /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define Z_ARG(args)  args
+#  else
+#    define Z_ARG(args)  ()
+#  endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#ifdef SYS16BIT
+#  if defined(M_I86SM) || defined(M_I86MM)
+     /* MSC small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef _MSC_VER
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#  if (defined(__SMALL__) || defined(__MEDIUM__))
+     /* Turbo C small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef __BORLANDC__
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
+#  endif
+#endif
+
+#if defined(WINDOWS) || defined(WIN32)
+   /* If building or using zlib as a DLL, define ZLIB_DLL.
+    * This is not mandatory, but it offers a little performance increase.
+    */
+#  ifdef ZLIB_DLL
+#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+#      ifdef ZLIB_INTERNAL
+#        define ZEXTERN extern __declspec(dllexport)
+#      else
+#        define ZEXTERN extern __declspec(dllimport)
+#      endif
+#    endif
+#  endif  /* ZLIB_DLL */
+   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+    * define ZLIB_WINAPI.
+    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+    */
+#  ifdef ZLIB_WINAPI
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+     /* No need for _export, use ZLIB.DEF instead. */
+     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+#    define ZEXPORT WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA WINAPIV
+#    else
+#      define ZEXPORTVA FAR CDECL
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  ifdef ZLIB_DLL
+#    ifdef ZLIB_INTERNAL
+#      define ZEXPORT   __declspec(dllexport)
+#      define ZEXPORTVA __declspec(dllexport)
+#    else
+#      define ZEXPORT   __declspec(dllimport)
+#      define ZEXPORTVA __declspec(dllimport)
+#    endif
+#  endif
+#endif
+
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
+#ifndef ZEXPORT
+#  define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA
+#endif
+
+#ifndef FAR
+#  define FAR
+#endif
+
+#if !defined(__MACTYPES__)
+typedef unsigned char  Byte;  /* 8 bits */
+#endif
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+#  define Bytef Byte FAR
+#else
+   typedef Byte  FAR Bytef;
+#endif
+typedef char  FAR charf;
+typedef int   FAR intf;
+typedef uInt  FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+   typedef void const *voidpc;
+   typedef void FAR   *voidpf;
+   typedef void       *voidp;
+#else
+   typedef Byte const *voidpc;
+   typedef Byte FAR   *voidpf;
+   typedef Byte       *voidp;
+#endif
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+#  include <limits.h>
+#  if (UINT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned
+#  elif (ULONG_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned long
+#  elif (USHRT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned short
+#  endif
+#endif
+
+#ifdef Z_U4
+   typedef Z_U4 z_crc_t;
+#else
+   typedef unsigned long z_crc_t;
+#endif
+
+#ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
+#  ifndef Z_SOLO
+#    include <sys/types.h>      /* for off_t */
+#  endif
+#endif
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifndef Z_SOLO
+#    include <stdarg.h>         /* for va_list */
+#  endif
+#endif
+
+#ifdef _WIN32
+#  ifndef Z_SOLO
+#    include <stddef.h>         /* for wchar_t */
+#  endif
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+#  define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+#  if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+#    ifdef VMS
+#      include <unixio.h>       /* for off_t */
+#    endif
+#    ifndef z_off_t
+#      define z_off_t off_t
+#    endif
+#  endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+#  define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+#  define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+#  define Z_WANT64
+#endif
+
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+
+#ifndef z_off_t
+#  define z_off_t long
+#endif
+
+#if !defined(_WIN32) && defined(Z_LARGE64)
+#  define z_off64_t off64_t
+#else
+#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+#    define z_off64_t __int64
+#  else
+#    define z_off64_t z_off_t
+#  endif
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+  #pragma map(deflateInit_,"DEIN")
+  #pragma map(deflateInit2_,"DEIN2")
+  #pragma map(deflateEnd,"DEEND")
+  #pragma map(deflateBound,"DEBND")
+  #pragma map(inflateInit_,"ININ")
+  #pragma map(inflateInit2_,"ININ2")
+  #pragma map(inflateEnd,"INEND")
+  #pragma map(inflateSync,"INSY")
+  #pragma map(inflateSetDictionary,"INSEDI")
+  #pragma map(compressBound,"CMBND")
+  #pragma map(inflate_table,"INTABL")
+  #pragma map(inflate_fast,"INFA")
+  #pragma map(inflate_copyright,"INCOPY")
+#endif
+
+#endif /* ZCONF_H */
diff --git a/lib/zlib/zlib.h b/lib/zlib/zlib.h
new file mode 100644
index 0000000..f09cdaf
--- /dev/null
+++ b/lib/zlib/zlib.h
@@ -0,0 +1,1912 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+  version 1.2.11, January 15th, 2017
+
+  Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+
+  The data format used by the zlib library is described by RFCs (Request for
+  Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
+  (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
+*/
+
+#ifndef ZLIB_H
+#define ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ZLIB_VERSION "1.2.11"
+#define ZLIB_VERNUM 0x12b0
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 11
+#define ZLIB_VER_SUBREVISION 0
+
+/*
+    The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed data.
+  This version of the library supports only one compression method (deflation)
+  but other algorithms will be added later and will have the same stream
+  interface.
+
+    Compression can be done in a single step if the buffers are large enough,
+  or can be done by repeated calls of the compression function.  In the latter
+  case, the application must provide more input and/or consume the output
+  (providing more output space) before each call.
+
+    The compressed data format used by default by the in-memory functions is
+  the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+  around a deflate stream, which is itself documented in RFC 1951.
+
+    The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio using the functions that start
+  with "gz".  The gzip format is different from the zlib format.  gzip is a
+  gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+    This library can optionally read and write gzip and raw deflate streams in
+  memory as well.
+
+    The zlib format was designed to be compact and fast for use in memory
+  and on communications channels.  The gzip format was designed for single-
+  file compression on file systems, has a larger header than zlib to maintain
+  directory information, and uses a different, slower check method than zlib.
+
+    The library does not install any signal handler.  The decoder checks
+  the consistency of the compressed data, so the library should never crash
+  even in the case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+    z_const Bytef *next_in;     /* next input byte */
+    uInt     avail_in;  /* number of bytes available at next_in */
+    uLong    total_in;  /* total number of input bytes read so far */
+
+    Bytef    *next_out; /* next output byte will go here */
+    uInt     avail_out; /* remaining free space at next_out */
+    uLong    total_out; /* total number of bytes output so far */
+
+    z_const char *msg;  /* last error message, NULL if no error */
+    struct internal_state FAR *state; /* not visible by applications */
+
+    alloc_func zalloc;  /* used to allocate the internal state */
+    free_func  zfree;   /* used to free the internal state */
+    voidpf     opaque;  /* private data object passed to zalloc and zfree */
+
+    int     data_type;  /* best guess about the data type: binary or text
+                           for deflate, or the decoding state for inflate */
+    uLong   adler;      /* Adler-32 or CRC-32 value of the uncompressed data */
+    uLong   reserved;   /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+     gzip header information passed to and from zlib routines.  See RFC 1952
+  for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+    int     text;       /* true if compressed data believed to be text */
+    uLong   time;       /* modification time */
+    int     xflags;     /* extra flags (not used when writing a gzip file) */
+    int     os;         /* operating system */
+    Bytef   *extra;     /* pointer to extra field or Z_NULL if none */
+    uInt    extra_len;  /* extra field length (valid if extra != Z_NULL) */
+    uInt    extra_max;  /* space at extra (only when reading header) */
+    Bytef   *name;      /* pointer to zero-terminated file name or Z_NULL */
+    uInt    name_max;   /* space at name (only when reading header) */
+    Bytef   *comment;   /* pointer to zero-terminated comment or Z_NULL */
+    uInt    comm_max;   /* space at comment (only when reading header) */
+    int     hcrc;       /* true if there was or will be a header crc */
+    int     done;       /* true when done reading gzip header (not used
+                           when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
+
+/*
+     The application must update next_in and avail_in when avail_in has dropped
+   to zero.  It must update next_out and avail_out when avail_out has dropped
+   to zero.  The application must initialize zalloc, zfree and opaque before
+   calling the init function.  All other fields are set by the compression
+   library and must not be updated by the application.
+
+     The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree.  This can be useful for custom
+   memory management.  The compression library attaches no meaning to the
+   opaque value.
+
+     zalloc must return Z_NULL if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, zalloc and zfree must be
+   thread safe.  In that case, zlib is thread-safe.  When zalloc and zfree are
+   Z_NULL on entry to the initialization function, they are set to internal
+   routines that use the standard library functions malloc() and free().
+
+     On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this if
+   the symbol MAXSEG_64K is defined (see zconf.h).  WARNING: On MSDOS, pointers
+   returned by zalloc for objects of exactly 65536 bytes *must* have their
+   offset normalized to zero.  The default allocation function provided by this
+   library ensures this (see zutil.c).  To reduce memory requirements and avoid
+   any allocation of 64K objects, at the expense of compression ratio, compile
+   the library with -DMAX_WBITS=14 (see zconf.h).
+
+     The fields total_in and total_out can be used for statistics or progress
+   reports.  After compression, total_in holds the total size of the
+   uncompressed data and may be saved for use by the decompressor (particularly
+   if the decompressor wants to decompress everything in a single step).
+*/
+
+                        /* constants */
+
+#define Z_NO_FLUSH      0
+#define Z_PARTIAL_FLUSH 1
+#define Z_SYNC_FLUSH    2
+#define Z_FULL_FLUSH    3
+#define Z_FINISH        4
+#define Z_BLOCK         5
+#define Z_TREES         6
+/* Allowed flush values; see deflate() and inflate() below for details */
+
+#define Z_OK            0
+#define Z_STREAM_END    1
+#define Z_NEED_DICT     2
+#define Z_ERRNO        (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR   (-3)
+#define Z_MEM_ERROR    (-4)
+#define Z_BUF_ERROR    (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION         0
+#define Z_BEST_SPEED             1
+#define Z_BEST_COMPRESSION       9
+#define Z_DEFAULT_COMPRESSION  (-1)
+/* compression levels */
+
+#define Z_FILTERED            1
+#define Z_HUFFMAN_ONLY        2
+#define Z_RLE                 3
+#define Z_FIXED               4
+#define Z_DEFAULT_STRATEGY    0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY   0
+#define Z_TEXT     1
+#define Z_ASCII    Z_TEXT   /* for compatibility with 1.2.2 and earlier */
+#define Z_UNKNOWN  2
+/* Possible values of the data_type field for deflate() */
+
+#define Z_DEFLATED   8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+
+                        /* basic functions */
+
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is not
+   compatible with the zlib.h header file used by the application.  This check
+   is automatically made by deflateInit and inflateInit.
+ */
+
+/*
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+
+     Initializes the internal stream state for compression.  The fields
+   zalloc, zfree and opaque must be initialized before by the caller.  If
+   zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+   allocation functions.
+
+     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+   1 gives best speed, 9 gives best compression, 0 gives no compression at all
+   (the input data is simply copied a block at a time).  Z_DEFAULT_COMPRESSION
+   requests a default compromise between speed and compression (currently
+   equivalent to level 6).
+
+     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if level is not a valid compression level, or
+   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+   with the version assumed by the caller (ZLIB_VERSION).  msg is set to null
+   if there is no error message.  deflateInit does not perform any compression:
+   this will be done by deflate().
+*/
+
+
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+/*
+    deflate compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
+
+    The detailed semantics are as follows.  deflate performs one or both of the
+  following actions:
+
+  - Compress more input starting at next_in and update next_in and avail_in
+    accordingly.  If not all input can be processed (because there is not
+    enough room in the output buffer), next_in and avail_in are updated and
+    processing will resume at this point for the next call of deflate().
+
+  - Generate more output starting at next_out and update next_out and avail_out
+    accordingly.  This action is forced if the parameter flush is non zero.
+    Forcing flush frequently degrades the compression ratio, so this parameter
+    should be set only when necessary.  Some output may be provided even if
+    flush is zero.
+
+    Before the call of deflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating avail_in or avail_out accordingly; avail_out should
+  never be zero before the call.  The application can consume the compressed
+  output when it wants, for example when the output buffer is full (avail_out
+  == 0), or after each call of deflate().  If deflate returns Z_OK and with
+  zero avail_out, it must be called again after making room in the output
+  buffer because there might be more output pending. See deflatePending(),
+  which can be used if desired to determine whether or not there is more ouput
+  in that case.
+
+    Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+  decide how much data to accumulate before producing output, in order to
+  maximize compression.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+  flushed to the output buffer and the output is aligned on a byte boundary, so
+  that the decompressor can get all input data available so far.  (In
+  particular avail_in is zero after the call if enough output space has been
+  provided before the call.) Flushing may degrade compression for some
+  compression algorithms and so it should be used only when necessary.  This
+  completes the current deflate block and follows it with an empty stored block
+  that is three bits plus filler bits to the next byte, followed by four bytes
+  (00 00 ff ff).
+
+    If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+  output buffer, but the output is not aligned to a byte boundary.  All of the
+  input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+  This completes the current deflate block and follows it with an empty fixed
+  codes block that is 10 bits long.  This assures that enough bytes are output
+  in order for the decompressor to finish the block before the empty fixed
+  codes block.
+
+    If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+  for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+  seven bits of the current block are held to be written as the next byte after
+  the next deflate block is completed.  In this case, the decompressor may not
+  be provided enough bits at this point in order to complete decompression of
+  the data provided so far to the compressor.  It may need to wait for the next
+  block to be emitted.  This is for advanced applications that need to control
+  the emission of deflate blocks.
+
+    If flush is set to Z_FULL_FLUSH, all output is flushed as with
+  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+  restart from this point if previous compressed data has been damaged or if
+  random access is desired.  Using Z_FULL_FLUSH too often can seriously degrade
+  compression.
+
+    If deflate returns with avail_out == 0, this function must be called again
+  with the same value of the flush parameter and more output space (updated
+  avail_out), until the flush is complete (deflate returns with non-zero
+  avail_out).  In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+  avail_out is greater than six to avoid repeated flush markers due to
+  avail_out == 0 on return.
+
+    If the parameter flush is set to Z_FINISH, pending input is processed,
+  pending output is flushed and deflate returns with Z_STREAM_END if there was
+  enough output space.  If deflate returns with Z_OK or Z_BUF_ERROR, this
+  function must be called again with Z_FINISH and more output space (updated
+  avail_out) but no more input data, until it returns with Z_STREAM_END or an
+  error.  After deflate has returned Z_STREAM_END, the only possible operations
+  on the stream are deflateReset or deflateEnd.
+
+    Z_FINISH can be used in the first deflate call after deflateInit if all the
+  compression is to be done in a single step.  In order to complete in one
+  call, avail_out must be at least the value returned by deflateBound (see
+  below).  Then deflate is guaranteed to return Z_STREAM_END.  If not enough
+  output space is provided, deflate will not return Z_STREAM_END, and it must
+  be called again as described above.
+
+    deflate() sets strm->adler to the Adler-32 checksum of all input read
+  so far (that is, total_in bytes).  If a gzip stream is being generated, then
+  strm->adler will be the CRC-32 checksum of the input read so far.  (See
+  deflateInit2 below.)
+
+    deflate() may update strm->data_type if it can make a good guess about
+  the input data type (Z_BINARY or Z_TEXT).  If in doubt, the data is
+  considered binary.  This field is only for information purposes and does not
+  affect the compression algorithm in any manner.
+
+    deflate() returns Z_OK if some progress has been made (more input
+  processed or more output produced), Z_STREAM_END if all input has been
+  consumed and all output has been produced (only when flush is set to
+  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+  if next_in or next_out was Z_NULL or the state was inadvertently written over
+  by the application), or Z_BUF_ERROR if no progress is possible (for example
+  avail_in or avail_out was zero).  Note that Z_BUF_ERROR is not fatal, and
+  deflate() can be called again with more input and more output space to
+  continue compressing.
+*/
+
+
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any pending
+   output.
+
+     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+   prematurely (some input or output was discarded).  In the error case, msg
+   may be set but then points to a static string (which must not be
+   deallocated).
+*/
+
+
+/*
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+
+     Initializes the internal stream state for decompression.  The fields
+   next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+   the caller.  In the current version of inflate, the provided input is not
+   read or consumed.  The allocation of a sliding window will be deferred to
+   the first call of inflate (if the decompression does not complete on the
+   first call).  If zalloc and zfree are set to Z_NULL, inflateInit updates
+   them to use default allocation functions.
+
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit does not perform any decompression.
+   Actual decompression will be done by inflate().  So next_in, and avail_in,
+   next_out, and avail_out are unused and unchanged.  The current
+   implementation of inflateInit() does not process any header information --
+   that is deferred until inflate() is called.
+*/
+
+
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+/*
+    inflate decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
+
+  The detailed semantics are as follows.  inflate performs one or both of the
+  following actions:
+
+  - Decompress more input starting at next_in and update next_in and avail_in
+    accordingly.  If not all input can be processed (because there is not
+    enough room in the output buffer), then next_in and avail_in are updated
+    accordingly, and processing will resume at this point for the next call of
+    inflate().
+
+  - Generate more output starting at next_out and update next_out and avail_out
+    accordingly.  inflate() provides as much output as possible, until there is
+    no more input data or no more space in the output buffer (see below about
+    the flush parameter).
+
+    Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating the next_* and avail_* values accordingly.  If the
+  caller of inflate() does not provide both available input and available
+  output space, it is possible that there will be no progress made.  The
+  application can consume the uncompressed output when it wants, for example
+  when the output buffer is full (avail_out == 0), or after each call of
+  inflate().  If inflate returns Z_OK and with zero avail_out, it must be
+  called again after making room in the output buffer because there might be
+  more output pending.
+
+    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+  Z_BLOCK, or Z_TREES.  Z_SYNC_FLUSH requests that inflate() flush as much
+  output as possible to the output buffer.  Z_BLOCK requests that inflate()
+  stop if and when it gets to the next deflate block boundary.  When decoding
+  the zlib or gzip format, this will cause inflate() to return immediately
+  after the header and before the first block.  When doing a raw inflate,
+  inflate() will go ahead and process the first block, and will return when it
+  gets to the end of that block, or when it runs out of data.
+
+    The Z_BLOCK option assists in appending to or combining deflate streams.
+  To assist in this, on return inflate() always sets strm->data_type to the
+  number of unused bits in the last byte taken from strm->next_in, plus 64 if
+  inflate() is currently decoding the last block in the deflate stream, plus
+  128 if inflate() returned immediately after decoding an end-of-block code or
+  decoding the complete header up to just before the first byte of the deflate
+  stream.  The end-of-block will not be indicated until all of the uncompressed
+  data from that block has been written to strm->next_out.  The number of
+  unused bits may in general be greater than seven, except when bit 7 of
+  data_type is set, in which case the number of unused bits will be less than
+  eight.  data_type is set as noted here every time inflate() returns for all
+  flush options, and so can be used to determine the amount of currently
+  consumed input in bits.
+
+    The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+  end of each deflate block header is reached, before any actual data in that
+  block is decoded.  This allows the caller to determine the length of the
+  deflate block header for later use in random access within a deflate block.
+  256 is added to the value of strm->data_type when inflate() returns
+  immediately after reaching the end of the deflate block header.
+
+    inflate() should normally be called until it returns Z_STREAM_END or an
+  error.  However if all decompression is to be performed in a single step (a
+  single call of inflate), the parameter flush should be set to Z_FINISH.  In
+  this case all pending input is processed and all pending output is flushed;
+  avail_out must be large enough to hold all of the uncompressed data for the
+  operation to complete.  (The size of the uncompressed data may have been
+  saved by the compressor for this purpose.)  The use of Z_FINISH is not
+  required to perform an inflation in one step.  However it may be used to
+  inform inflate that a faster approach can be used for the single inflate()
+  call.  Z_FINISH also informs inflate to not maintain a sliding window if the
+  stream completes, which reduces inflate's memory footprint.  If the stream
+  does not complete, either because not all of the stream is provided or not
+  enough output space is provided, then a sliding window will be allocated and
+  inflate() can be called again to continue the operation as if Z_NO_FLUSH had
+  been used.
+
+     In this implementation, inflate() always flushes as much output as
+  possible to the output buffer, and always uses the faster approach on the
+  first call.  So the effects of the flush parameter in this implementation are
+  on the return value of inflate() as noted below, when inflate() returns early
+  when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of
+  memory for a sliding window when Z_FINISH is used.
+
+     If a preset dictionary is needed after this call (see inflateSetDictionary
+  below), inflate sets strm->adler to the Adler-32 checksum of the dictionary
+  chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+  strm->adler to the Adler-32 checksum of all output produced so far (that is,
+  total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+  below.  At the end of the stream, inflate() checks that its computed Adler-32
+  checksum is equal to that saved by the compressor and returns Z_STREAM_END
+  only if the checksum is correct.
+
+    inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+  deflate data.  The header type is detected automatically, if requested when
+  initializing with inflateInit2().  Any information contained in the gzip
+  header is not retained unless inflateGetHeader() is used.  When processing
+  gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
+  produced so far.  The CRC-32 is checked against the gzip trailer, as is the
+  uncompressed length, modulo 2^32.
+
+    inflate() returns Z_OK if some progress has been made (more input processed
+  or more output produced), Z_STREAM_END if the end of the compressed data has
+  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect check
+  value, in which case strm->msg points to a string with a more specific
+  error), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+  next_in or next_out was Z_NULL, or the state was inadvertently written over
+  by the application), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR
+  if no progress was possible or if there was not enough room in the output
+  buffer when Z_FINISH is used.  Note that Z_BUF_ERROR is not fatal, and
+  inflate() can be called again with more input and more output space to
+  continue decompressing.  If Z_DATA_ERROR is returned, the application may
+  then call inflateSync() to look for a good compression block if a partial
+  recovery of the data is to be attempted.
+*/
+
+
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any pending
+   output.
+
+     inflateEnd returns Z_OK if success, or Z_STREAM_ERROR if the stream state
+   was inconsistent.
+*/
+
+
+                        /* Advanced functions */
+
+/*
+    The following functions are needed only in some special applications.
+*/
+
+/*
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+                                     int  level,
+                                     int  method,
+                                     int  windowBits,
+                                     int  memLevel,
+                                     int  strategy));
+
+     This is another version of deflateInit with more compression options.  The
+   fields next_in, zalloc, zfree and opaque must be initialized before by the
+   caller.
+
+     The method parameter is the compression method.  It must be Z_DEFLATED in
+   this version of the library.
+
+     The windowBits parameter is the base two logarithm of the window size
+   (the size of the history buffer).  It should be in the range 8..15 for this
+   version of the library.  Larger values of this parameter result in better
+   compression at the expense of memory usage.  The default value is 15 if
+   deflateInit is used instead.
+
+     For the current implementation of deflate(), a windowBits value of 8 (a
+   window size of 256 bytes) is not supported.  As a result, a request for 8
+   will result in 9 (a 512-byte window).  In that case, providing 8 to
+   inflateInit2() will result in an error when the zlib header with 9 is
+   checked against the initialization of inflate().  The remedy is to not use 8
+   with deflateInit2() with this initialization, or at least in that case use 9
+   with inflateInit2().
+
+     windowBits can also be -8..-15 for raw deflate.  In this case, -windowBits
+   determines the window size.  deflate() will then generate raw deflate data
+   with no zlib header or trailer, and will not compute a check value.
+
+     windowBits can also be greater than 15 for optional gzip encoding.  Add
+   16 to windowBits to write a simple gzip header and trailer around the
+   compressed data instead of a zlib wrapper.  The gzip header will have no
+   file name, no extra data, no comment, no modification time (set to zero), no
+   header crc, and the operating system will be set to the appropriate value,
+   if the operating system was determined at compile time.  If a gzip stream is
+   being written, strm->adler is a CRC-32 instead of an Adler-32.
+
+     For raw deflate or gzip encoding, a request for a 256-byte window is
+   rejected as invalid, since only the zlib header provides a means of
+   transmitting the window size to the decompressor.
+
+     The memLevel parameter specifies how much memory should be allocated
+   for the internal compression state.  memLevel=1 uses minimum memory but is
+   slow and reduces compression ratio; memLevel=9 uses maximum memory for
+   optimal speed.  The default value is 8.  See zconf.h for total memory usage
+   as a function of windowBits and memLevel.
+
+     The strategy parameter is used to tune the compression algorithm.  Use the
+   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+   filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
+   string match), or Z_RLE to limit match distances to one (run-length
+   encoding).  Filtered data consists mostly of small values with a somewhat
+   random distribution.  In this case, the compression algorithm is tuned to
+   compress them better.  The effect of Z_FILTERED is to force more Huffman
+   coding and less string matching; it is somewhat intermediate between
+   Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY.  Z_RLE is designed to be almost as
+   fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data.  The
+   strategy parameter only affects the compression ratio but not the
+   correctness of the compressed output even if it is not set appropriately.
+   Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+   decoder for special applications.
+
+     deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+   method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+   incompatible with the version assumed by the caller (ZLIB_VERSION).  msg is
+   set to null if there is no error message.  deflateInit2 does not perform any
+   compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the compression dictionary from the given byte sequence
+   without producing any compressed output.  When using the zlib format, this
+   function must be called immediately after deflateInit, deflateInit2 or
+   deflateReset, and before any call of deflate.  When doing raw deflate, this
+   function must be called either before any call of deflate, or immediately
+   after the completion of a deflate block, i.e. after all input has been
+   consumed and all output has been delivered when using any of the flush
+   options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH.  The
+   compressor and decompressor must use exactly the same dictionary (see
+   inflateSetDictionary).
+
+     The dictionary should consist of strings (byte sequences) that are likely
+   to be encountered later in the data to be compressed, with the most commonly
+   used strings preferably put towards the end of the dictionary.  Using a
+   dictionary is most useful when the data to be compressed is short and can be
+   predicted with good accuracy; the data can then be compressed better than
+   with the default empty dictionary.
+
+     Depending on the size of the compression data structures selected by
+   deflateInit or deflateInit2, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size
+   provided in deflateInit or deflateInit2.  Thus the strings most likely to be
+   useful should be put at the end of the dictionary, not at the front.  In
+   addition, the current implementation of deflate will use at most the window
+   size minus 262 bytes of the provided dictionary.
+
+     Upon return of this function, strm->adler is set to the Adler-32 value
+   of the dictionary; the decompressor may later use this value to determine
+   which dictionary has been used by the compressor.  (The Adler-32 value
+   applies to the whole dictionary even if only a subset of the dictionary is
+   actually used by the compressor.) If a raw deflate was requested, then the
+   Adler-32 value is not computed and strm->adler is not set.
+
+     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
+   inconsistent (for example if deflate has already been called for this stream
+   or if not at a block boundary for raw deflate).  deflateSetDictionary does
+   not perform any compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateGetDictionary OF((z_streamp strm,
+                                             Bytef *dictionary,
+                                             uInt  *dictLength));
+/*
+     Returns the sliding dictionary being maintained by deflate.  dictLength is
+   set to the number of bytes in the dictionary, and that many bytes are copied
+   to dictionary.  dictionary must have enough space, where 32768 bytes is
+   always enough.  If deflateGetDictionary() is called with dictionary equal to
+   Z_NULL, then only the dictionary length is returned, and nothing is copied.
+   Similary, if dictLength is Z_NULL, then it is not set.
+
+     deflateGetDictionary() may return a length less than the window size, even
+   when more than the window size in input has been provided. It may return up
+   to 258 bytes less in that case, due to how zlib's implementation of deflate
+   manages the sliding window and lookahead for matches, where matches can be
+   up to 258 bytes long. If the application needs the last window-size bytes of
+   input, then that would need to be saved by the application outside of zlib.
+
+     deflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+   stream state is inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when several compression strategies will be
+   tried, for example when there are several ways of pre-processing the input
+   data with a filter.  The streams that will be discarded should then be freed
+   by calling deflateEnd.  Note that deflateCopy duplicates the internal
+   compression state which can be quite large, so this strategy is slow and can
+   consume lots of memory.
+
+     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
+   destination.
+*/
+
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to deflateEnd followed by deflateInit, but
+   does not free and reallocate the internal compression state.  The stream
+   will leave the compression level and any other attributes that may have been
+   set unchanged.
+
+     deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+                                      int level,
+                                      int strategy));
+/*
+     Dynamically update the compression level and compression strategy.  The
+   interpretation of level and strategy is as in deflateInit2().  This can be
+   used to switch between compression and straight copy of the input data, or
+   to switch to a different kind of input data requiring a different strategy.
+   If the compression approach (which is a function of the level) or the
+   strategy is changed, and if any input has been consumed in a previous
+   deflate() call, then the input available so far is compressed with the old
+   level and strategy using deflate(strm, Z_BLOCK).  There are three approaches
+   for the compression levels 0, 1..3, and 4..9 respectively.  The new level
+   and strategy will take effect at the next call of deflate().
+
+     If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
+   not have enough output space to complete, then the parameter change will not
+   take effect.  In this case, deflateParams() can be called again with the
+   same parameters and more output space to try again.
+
+     In order to assure a change in the parameters on the first try, the
+   deflate stream should be flushed using deflate() with Z_BLOCK or other flush
+   request until strm.avail_out is not zero, before calling deflateParams().
+   Then no more input data should be provided before the deflateParams() call.
+   If this is done, the old level and strategy will be applied to the data
+   compressed before deflateParams(), and the new level and strategy will be
+   applied to the the data compressed after deflateParams().
+
+     deflateParams returns Z_OK on success, Z_STREAM_ERROR if the source stream
+   state was inconsistent or if a parameter was invalid, or Z_BUF_ERROR if
+   there was not enough output space to complete the compression of the
+   available input data before a change in the strategy or approach.  Note that
+   in the case of a Z_BUF_ERROR, the parameters are not changed.  A return
+   value of Z_BUF_ERROR is not fatal, in which case deflateParams() can be
+   retried with more output space.
+*/
+
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+                                    int good_length,
+                                    int max_lazy,
+                                    int nice_length,
+                                    int max_chain));
+/*
+     Fine tune deflate's internal compression parameters.  This should only be
+   used by someone who understands the algorithm used by zlib's deflate for
+   searching for the best matching string, and even then only by the most
+   fanatic optimizer trying to squeeze out the last compressed bit for their
+   specific input data.  Read the deflate.c source code for the meaning of the
+   max_lazy, good_length, nice_length, and max_chain parameters.
+
+     deflateTune() can be called after deflateInit() or deflateInit2(), and
+   returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
+ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
+                                       uLong sourceLen));
+/*
+     deflateBound() returns an upper bound on the compressed size after
+   deflation of sourceLen bytes.  It must be called after deflateInit() or
+   deflateInit2(), and after deflateSetHeader(), if used.  This would be used
+   to allocate an output buffer for deflation in a single pass, and so would be
+   called before deflate().  If that first deflate() call is provided the
+   sourceLen input bytes, an output buffer allocated to the size returned by
+   deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
+   to return Z_STREAM_END.  Note that it is possible for the compressed size to
+   be larger than the value returned by deflateBound() if flush options other
+   than Z_FINISH or Z_NO_FLUSH are used.
+*/
+
+ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
+                                       unsigned *pending,
+                                       int *bits));
+/*
+     deflatePending() returns the number of bytes and bits of output that have
+   been generated, but not yet provided in the available output.  The bytes not
+   provided would be due to the available output space having being consumed.
+   The number of bits of output not provided are between 0 and 7, where they
+   await more bits to join them in order to fill out a full byte.  If pending
+   or bits are Z_NULL, then those values are not set.
+
+     deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+ */
+
+ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     deflatePrime() inserts bits in the deflate output stream.  The intent
+   is that this function is used to start off the deflate output with the bits
+   leftover from a previous deflate stream when appending to it.  As such, this
+   function can only be used for raw deflate, and must be used before the first
+   deflate() call after a deflateInit2() or deflateReset().  bits must be less
+   than or equal to 16, and that many of the least significant bits of value
+   will be inserted in the output.
+
+     deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough
+   room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the
+   source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+     deflateSetHeader() provides gzip header information for when a gzip
+   stream is requested by deflateInit2().  deflateSetHeader() may be called
+   after deflateInit2() or deflateReset() and before the first call of
+   deflate().  The text, time, os, extra field, name, and comment information
+   in the provided gz_header structure are written to the gzip header (xflag is
+   ignored -- the extra flags are set according to the compression level).  The
+   caller must assure that, if not Z_NULL, name and comment are terminated with
+   a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+   available there.  If hcrc is true, a gzip header crc is included.  Note that
+   the current versions of the command-line version of gzip (up through version
+   1.3.x) do not support header crc's, and will report that it is a "multi-part
+   gzip file" and give up.
+
+     If deflateSetHeader is not used, the default gzip header has text false,
+   the time set to zero, and os set to 255, with no extra, name, or comment
+   fields.  The gzip header is returned to the default state by deflateReset().
+
+     deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+                                     int  windowBits));
+
+     This is another version of inflateInit with an extra parameter.  The
+   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+   before by the caller.
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library.  The default value is 15 if inflateInit is used
+   instead.  windowBits must be greater than or equal to the windowBits value
+   provided to deflateInit2() while compressing, or it must be equal to 15 if
+   deflateInit2() was not used.  If a compressed stream with a larger window
+   size is given as input, inflate() will return with the error code
+   Z_DATA_ERROR instead of trying to allocate a larger window.
+
+     windowBits can also be zero to request that inflate use the window size in
+   the zlib header of the compressed stream.
+
+     windowBits can also be -8..-15 for raw inflate.  In this case, -windowBits
+   determines the window size.  inflate() will then process raw deflate data,
+   not looking for a zlib or gzip header, not generating a check value, and not
+   looking for any check values for comparison at the end of the stream.  This
+   is for use with other formats that use the deflate compressed data format
+   such as zip.  Those formats provide their own check values.  If a custom
+   format is developed using the raw deflate format for compressed data, it is
+   recommended that a check value such as an Adler-32 or a CRC-32 be applied to
+   the uncompressed data as is done in the zlib, gzip, and zip formats.  For
+   most applications, the zlib format should be used as is.  Note that comments
+   above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+     windowBits can also be greater than 15 for optional gzip decoding.  Add
+   32 to windowBits to enable zlib and gzip decoding with automatic header
+   detection, or add 16 to decode only the gzip format (the zlib format will
+   return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is a
+   CRC-32 instead of an Adler-32.  Unlike the gunzip utility and gzread() (see
+   below), inflate() will not automatically decode concatenated gzip streams.
+   inflate() will return Z_STREAM_END at the end of the gzip stream.  The state
+   would need to be reset to continue decoding a subsequent gzip stream.
+
+     inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit2 does not perform any decompression
+   apart from possibly reading the zlib header if present: actual decompression
+   will be done by inflate().  (So next_in and avail_in may be modified, but
+   next_out and avail_out are unused and unchanged.) The current implementation
+   of inflateInit2() does not process any header information -- that is
+   deferred until inflate() is called.
+*/
+
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the decompression dictionary from the given uncompressed byte
+   sequence.  This function must be called immediately after a call of inflate,
+   if that call returned Z_NEED_DICT.  The dictionary chosen by the compressor
+   can be determined from the Adler-32 value returned by that call of inflate.
+   The compressor and decompressor must use exactly the same dictionary (see
+   deflateSetDictionary).  For raw inflate, this function can be called at any
+   time to set the dictionary.  If the provided dictionary is smaller than the
+   window and there is already data in the window, then the provided dictionary
+   will amend what's there.  The application must insure that the dictionary
+   that was used for compression is provided.
+
+     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
+   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+   expected one (incorrect Adler-32 value).  inflateSetDictionary does not
+   perform any decompression: this will be done by subsequent calls of
+   inflate().
+*/
+
+ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
+                                             Bytef *dictionary,
+                                             uInt  *dictLength));
+/*
+     Returns the sliding dictionary being maintained by inflate.  dictLength is
+   set to the number of bytes in the dictionary, and that many bytes are copied
+   to dictionary.  dictionary must have enough space, where 32768 bytes is
+   always enough.  If inflateGetDictionary() is called with dictionary equal to
+   Z_NULL, then only the dictionary length is returned, and nothing is copied.
+   Similary, if dictLength is Z_NULL, then it is not set.
+
+     inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+   stream state is inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/*
+     Skips invalid compressed data until a possible full flush point (see above
+   for the description of deflate with Z_FULL_FLUSH) can be found, or until all
+   available input is skipped.  No output is provided.
+
+     inflateSync searches for a 00 00 FF FF pattern in the compressed data.
+   All full flush points have this pattern, but not all occurrences of this
+   pattern are full flush points.
+
+     inflateSync returns Z_OK if a possible full flush point has been found,
+   Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
+   has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
+   In the success case, the application may save the current current value of
+   total_in which indicates where valid compressed data was found.  In the
+   error case, the application may repeatedly call inflateSync, providing more
+   input each time, until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when randomly accessing a large stream.  The
+   first pass through the stream can periodically record the inflate state,
+   allowing restarting inflate at those points when randomly accessing the
+   stream.
+
+     inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
+   destination.
+*/
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to inflateEnd followed by inflateInit,
+   but does not free and reallocate the internal decompression state.  The
+   stream will keep attributes that may have been set by inflateInit2.
+
+     inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
+
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+                                      int windowBits));
+/*
+     This function is the same as inflateReset, but it also permits changing
+   the wrap and window size requests.  The windowBits parameter is interpreted
+   the same as it is for inflateInit2.  If the window size is changed, then the
+   memory allocated for the window is freed, and the window will be reallocated
+   by inflate() if needed.
+
+     inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+   the windowBits parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     This function inserts bits in the inflate input stream.  The intent is
+   that this function is used to start inflating at a bit position in the
+   middle of a byte.  The provided bits will be used before any bytes are used
+   from next_in.  This function should only be used with raw inflate, and
+   should be used before the first inflate() call after inflateInit2() or
+   inflateReset().  bits must be less than or equal to 16, and that many of the
+   least significant bits of value will be inserted in the input.
+
+     If bits is negative, then the input stream bit buffer is emptied.  Then
+   inflatePrime() can be called again to put bits in the buffer.  This is used
+   to clear out bits leftover after feeding inflate a block description prior
+   to feeding inflate codes.
+
+     inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+/*
+     This function returns two values, one in the lower 16 bits of the return
+   value, and the other in the remaining upper bits, obtained by shifting the
+   return value down 16 bits.  If the upper value is -1 and the lower value is
+   zero, then inflate() is currently decoding information outside of a block.
+   If the upper value is -1 and the lower value is non-zero, then inflate is in
+   the middle of a stored block, with the lower value equaling the number of
+   bytes from the input remaining to copy.  If the upper value is not -1, then
+   it is the number of bits back from the current bit position in the input of
+   the code (literal or length/distance pair) currently being processed.  In
+   that case the lower value is the number of bytes already emitted for that
+   code.
+
+     A code is being processed if inflate is waiting for more input to complete
+   decoding of the code, or if it has completed decoding but is waiting for
+   more output space to write the literal or match data.
+
+     inflateMark() is used to mark locations in the input data for random
+   access, which may be at bit positions, and to note those cases where the
+   output of a code may span boundaries of random access blocks.  The current
+   location in the input stream can be determined from avail_in and data_type
+   as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+     inflateMark returns the value noted above, or -65536 if the provided
+   source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+     inflateGetHeader() requests that gzip header information be stored in the
+   provided gz_header structure.  inflateGetHeader() may be called after
+   inflateInit2() or inflateReset(), and before the first call of inflate().
+   As inflate() processes the gzip stream, head->done is zero until the header
+   is completed, at which time head->done is set to one.  If a zlib stream is
+   being decoded, then head->done is set to -1 to indicate that there will be
+   no gzip header information forthcoming.  Note that Z_BLOCK or Z_TREES can be
+   used to force inflate() to return immediately after header processing is
+   complete and before any actual data is decompressed.
+
+     The text, time, xflags, and os fields are filled in with the gzip header
+   contents.  hcrc is set to true if there is a header CRC.  (The header CRC
+   was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+   contains the maximum number of bytes to write to extra.  Once done is true,
+   extra_len contains the actual extra field length, and extra contains the
+   extra field, or that field truncated if extra_max is less than extra_len.
+   If name is not Z_NULL, then up to name_max characters are written there,
+   terminated with a zero unless the length is greater than name_max.  If
+   comment is not Z_NULL, then up to comm_max characters are written there,
+   terminated with a zero unless the length is greater than comm_max.  When any
+   of extra, name, or comment are not Z_NULL and the respective field is not
+   present in the header, then that field is set to Z_NULL to signal its
+   absence.  This allows the use of deflateSetHeader() with the returned
+   structure to duplicate the header.  However if those fields are set to
+   allocated memory, then the application will need to save those pointers
+   elsewhere so that they can be eventually freed.
+
+     If inflateGetHeader is not used, then the header information is simply
+   discarded.  The header is always checked for validity, including the header
+   CRC if present.  inflateReset() will reset the process to discard the header
+   information.  The application would need to call inflateGetHeader() again to
+   retrieve the header from the next gzip stream.
+
+     inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+                                        unsigned char FAR *window));
+
+     Initialize the internal stream state for decompression using inflateBack()
+   calls.  The fields zalloc, zfree and opaque in strm must be initialized
+   before the call.  If zalloc and zfree are Z_NULL, then the default library-
+   derived memory allocation routines are used.  windowBits is the base two
+   logarithm of the window size, in the range 8..15.  window is a caller
+   supplied buffer of that size.  Except for special applications where it is
+   assured that deflate was used with small window sizes, windowBits must be 15
+   and a 32K byte window must be supplied to be able to decompress general
+   deflate streams.
+
+     See inflateBack() for the usage of these routines.
+
+     inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
+   the parameters are invalid, Z_MEM_ERROR if the internal state could not be
+   allocated, or Z_VERSION_ERROR if the version of the library does not match
+   the version of the header file.
+*/
+
+typedef unsigned (*in_func) OF((void FAR *,
+                                z_const unsigned char FAR * FAR *));
+typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+                                    in_func in, void FAR *in_desc,
+                                    out_func out, void FAR *out_desc));
+/*
+     inflateBack() does a raw inflate with a single call using a call-back
+   interface for input and output.  This is potentially more efficient than
+   inflate() for file i/o applications, in that it avoids copying between the
+   output and the sliding window by simply making the window itself the output
+   buffer.  inflate() can be faster on modern CPUs when used with large
+   buffers.  inflateBack() trusts the application to not change the output
+   buffer passed by the output function, at least until inflateBack() returns.
+
+     inflateBackInit() must be called first to allocate the internal state
+   and to initialize the state with the user-provided window buffer.
+   inflateBack() may then be used multiple times to inflate a complete, raw
+   deflate stream with each call.  inflateBackEnd() is then called to free the
+   allocated state.
+
+     A raw deflate stream is one with no zlib or gzip header or trailer.
+   This routine would normally be used in a utility that reads zip or gzip
+   files and writes out uncompressed files.  The utility would decode the
+   header and process the trailer on its own, hence this routine expects only
+   the raw deflate stream to decompress.  This is different from the default
+   behavior of inflate(), which expects a zlib header and trailer around the
+   deflate stream.
+
+     inflateBack() uses two subroutines supplied by the caller that are then
+   called by inflateBack() for input and output.  inflateBack() calls those
+   routines until it reads a complete deflate stream and writes out all of the
+   uncompressed data, or until it encounters an error.  The function's
+   parameters and return types are defined above in the in_func and out_func
+   typedefs.  inflateBack() will call in(in_desc, &buf) which should return the
+   number of bytes of provided input, and a pointer to that input in buf.  If
+   there is no input available, in() must return zero -- buf is ignored in that
+   case -- and inflateBack() will return a buffer error.  inflateBack() will
+   call out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].
+   out() should return zero on success, or non-zero on failure.  If out()
+   returns non-zero, inflateBack() will return with an error.  Neither in() nor
+   out() are permitted to change the contents of the window provided to
+   inflateBackInit(), which is also the buffer that out() uses to write from.
+   The length written by out() will be at most the window size.  Any non-zero
+   amount of input may be provided by in().
+
+     For convenience, inflateBack() can be provided input on the first call by
+   setting strm->next_in and strm->avail_in.  If that input is exhausted, then
+   in() will be called.  Therefore strm->next_in must be initialized before
+   calling inflateBack().  If strm->next_in is Z_NULL, then in() will be called
+   immediately for input.  If strm->next_in is not Z_NULL, then strm->avail_in
+   must also be initialized, and then if strm->avail_in is not zero, input will
+   initially be taken from strm->next_in[0 ..  strm->avail_in - 1].
+
+     The in_desc and out_desc parameters of inflateBack() is passed as the
+   first parameter of in() and out() respectively when they are called.  These
+   descriptors can be optionally used to pass any information that the caller-
+   supplied in() and out() functions need to do their job.
+
+     On return, inflateBack() will set strm->next_in and strm->avail_in to
+   pass back any unused input that was provided by the last in() call.  The
+   return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
+   if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+   in the deflate stream (in which case strm->msg is set to indicate the nature
+   of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+   In the case of Z_BUF_ERROR, an input or output error can be distinguished
+   using strm->next_in which will be Z_NULL only if in() returned an error.  If
+   strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+   non-zero.  (in() will always be called before out(), so strm->next_in is
+   assured to be defined if out() returns non-zero.)  Note that inflateBack()
+   cannot return Z_OK.
+*/
+
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+/*
+     All memory allocated by inflateBackInit() is freed.
+
+     inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
+   state was inconsistent.
+*/
+
+ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+/* Return flags indicating compile-time options.
+
+    Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
+     1.0: size of uInt
+     3.2: size of uLong
+     5.4: size of voidpf (pointer)
+     7.6: size of z_off_t
+
+    Compiler, assembler, and debug options:
+     8: ZLIB_DEBUG
+     9: ASMV or ASMINF -- use ASM code
+     10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
+     11: 0 (reserved)
+
+    One-time table building (smaller code, but not thread-safe if true):
+     12: BUILDFIXED -- build static block decoding tables when needed
+     13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
+     14,15: 0 (reserved)
+
+    Library content (indicates missing functionality):
+     16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
+                          deflate code when not needed)
+     17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
+                    and decode gzip streams (to avoid linking crc code)
+     18-19: 0 (reserved)
+
+    Operation variations (changes in library functionality):
+     20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
+     21: FASTEST -- deflate algorithm with only one, lowest compression level
+     22,23: 0 (reserved)
+
+    The sprintf variant used by gzprintf (zero is best):
+     24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
+     25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
+     26: 0 = returns value, 1 = void -- 1 means inferred string length returned
+
+    Remainder:
+     27-31: 0 (reserved)
+ */
+
+#ifndef Z_SOLO
+
+                        /* utility functions */
+
+/*
+     The following utility functions are implemented on top of the basic
+   stream-oriented functions.  To simplify the interface, some default options
+   are assumed (compression level and memory usage, standard memory allocation
+   functions).  The source code of these utility functions can be modified if
+   you need special options.
+*/
+
+ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
+                                 const Bytef *source, uLong sourceLen));
+/*
+     Compresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
+   compressed data.  compress() is equivalent to compress2() with a level
+   parameter of Z_DEFAULT_COMPRESSION.
+
+     compress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer.
+*/
+
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
+                                  const Bytef *source, uLong sourceLen,
+                                  int level));
+/*
+     Compresses the source buffer into the destination buffer.  The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer.  Upon entry, destLen is the total size of the
+   destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
+   compressed data.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
+/*
+     compressBound() returns an upper bound on the compressed size after
+   compress() or compress2() on sourceLen bytes.  It would be used before a
+   compress() or compress2() call to allocate the destination buffer.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
+                                   const Bytef *source, uLong sourceLen));
+/*
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be large enough to hold the entire
+   uncompressed data.  (The size of the uncompressed data must have been saved
+   previously by the compressor and transmitted to the decompressor by some
+   mechanism outside the scope of this compression library.) Upon exit, destLen
+   is the actual size of the uncompressed data.
+
+     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.  In
+   the case where there is not enough room, uncompress() will fill the output
+   buffer with the uncompressed data up to that point.
+*/
+
+ZEXTERN int ZEXPORT uncompress2 OF((Bytef *dest,   uLongf *destLen,
+                                    const Bytef *source, uLong *sourceLen));
+/*
+     Same as uncompress, except that sourceLen is a pointer, where the
+   length of the source is *sourceLen.  On return, *sourceLen is the number of
+   source bytes consumed.
+*/
+
+                        /* gzip file access functions */
+
+/*
+     This library supports reading and writing files in gzip (.gz) format with
+   an interface similar to that of stdio, using the functions that start with
+   "gz".  The gzip format is different from the zlib format.  gzip is a gzip
+   wrapper, documented in RFC 1952, wrapped around a deflate stream.
+*/
+
+typedef struct gzFile_s *gzFile;    /* semi-opaque gzip file descriptor */
+
+/*
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+     Opens a gzip (.gz) file for reading or writing.  The mode parameter is as
+   in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
+   a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
+   compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
+   for fixed code compression as in "wb9F".  (See the description of
+   deflateInit2 for more information about the strategy parameter.)  'T' will
+   request transparent writing or appending with no compression and not using
+   the gzip format.
+
+     "a" can be used instead of "w" to request that the gzip stream that will
+   be written be appended to the file.  "+" will result in an error, since
+   reading and writing to the same gzip file is not supported.  The addition of
+   "x" when writing will create the file exclusively, which fails if the file
+   already exists.  On systems that support it, the addition of "e" when
+   reading or writing will set the flag to close the file on an execve() call.
+
+     These functions, as well as gzip, will read and decode a sequence of gzip
+   streams in a file.  The append function of gzopen() can be used to create
+   such a file.  (Also see gzflush() for another way to do this.)  When
+   appending, gzopen does not test whether the file begins with a gzip stream,
+   nor does it look for the end of the gzip streams to begin appending.  gzopen
+   will simply append a gzip stream to the existing file.
+
+     gzopen can be used to read a file which is not in gzip format; in this
+   case gzread will directly read from the file without decompression.  When
+   reading, this will be detected automatically by looking for the magic two-
+   byte gzip header.
+
+     gzopen returns NULL if the file could not be opened, if there was
+   insufficient memory to allocate the gzFile state, or if an invalid mode was
+   specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+   errno can be checked to determine if the reason gzopen failed was that the
+   file could not be opened.
+*/
+
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+/*
+     gzdopen associates a gzFile with the file descriptor fd.  File descriptors
+   are obtained from calls like open, dup, creat, pipe or fileno (if the file
+   has been previously opened with fopen).  The mode parameter is as in gzopen.
+
+     The next call of gzclose on the returned gzFile will also close the file
+   descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+   fd.  If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+   mode);.  The duplicated descriptor should be saved to avoid a leak, since
+   gzdopen does not close fd if it fails.  If you are using fileno() to get the
+   file descriptor from a FILE *, then you will have to use dup() to avoid
+   double-close()ing the file descriptor.  Both gzclose() and fclose() will
+   close the associated file descriptor, so they need to have different file
+   descriptors.
+
+     gzdopen returns NULL if there was insufficient memory to allocate the
+   gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+   provided, or '+' was provided), or if fd is -1.  The file descriptor is not
+   used until the next gz* read, write, seek, or close operation, so gzdopen
+   will not detect if fd is invalid (unless fd is -1).
+*/
+
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
+/*
+     Set the internal buffer size used by this library's functions.  The
+   default buffer size is 8192 bytes.  This function must be called after
+   gzopen() or gzdopen(), and before any other calls that read or write the
+   file.  The buffer memory allocation is always deferred to the first read or
+   write.  Three times that size in buffer space is allocated.  A larger buffer
+   size of, for example, 64K or 128K bytes will noticeably increase the speed
+   of decompression (reading).
+
+     The new buffer size also affects the maximum length for gzprintf().
+
+     gzbuffer() returns 0 on success, or -1 on failure, such as being called
+   too late.
+*/
+
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+     Dynamically update the compression level or strategy.  See the description
+   of deflateInit2 for the meaning of these parameters.  Previously provided
+   data is flushed before the parameter change.
+
+     gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not
+   opened for writing, Z_ERRNO if there is an error writing the flushed data,
+   or Z_MEM_ERROR if there is a memory allocation error.
+*/
+
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+/*
+     Reads the given number of uncompressed bytes from the compressed file.  If
+   the input file is not in gzip format, gzread copies the given number of
+   bytes into the buffer directly from the file.
+
+     After reaching the end of a gzip stream in the input, gzread will continue
+   to read, looking for another gzip stream.  Any number of gzip streams may be
+   concatenated in the input file, and will all be decompressed by gzread().
+   If something other than a gzip stream is encountered after a gzip stream,
+   that remaining trailing garbage is ignored (and no error is returned).
+
+     gzread can be used to read a gzip file that is being concurrently written.
+   Upon reaching the end of the input, gzread will return with the available
+   data.  If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then
+   gzclearerr can be used to clear the end of file indicator in order to permit
+   gzread to be tried again.  Z_OK indicates that a gzip stream was completed
+   on the last gzread.  Z_BUF_ERROR indicates that the input file ended in the
+   middle of a gzip stream.  Note that gzread does not return -1 in the event
+   of an incomplete gzip stream.  This error is deferred until gzclose(), which
+   will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip
+   stream.  Alternatively, gzerror can be used before gzclose to detect this
+   case.
+
+     gzread returns the number of uncompressed bytes actually read, less than
+   len for end of file, or -1 for error.  If len is too large to fit in an int,
+   then nothing is read, -1 is returned, and the error state is set to
+   Z_STREAM_ERROR.
+*/
+
+ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems,
+                                     gzFile file));
+/*
+     Read up to nitems items of size size from file to buf, otherwise operating
+   as gzread() does.  This duplicates the interface of stdio's fread(), with
+   size_t request and return types.  If the library defines size_t, then
+   z_size_t is identical to size_t.  If not, then z_size_t is an unsigned
+   integer type that can contain a pointer.
+
+     gzfread() returns the number of full items read of size size, or zero if
+   the end of the file was reached and a full item could not be read, or if
+   there was an error.  gzerror() must be consulted if zero is returned in
+   order to determine if there was an error.  If the multiplication of size and
+   nitems overflows, i.e. the product does not fit in a z_size_t, then nothing
+   is read, zero is returned, and the error state is set to Z_STREAM_ERROR.
+
+     In the event that the end of file is reached and only a partial item is
+   available at the end, i.e. the remaining uncompressed data length is not a
+   multiple of size, then the final partial item is nevetheless read into buf
+   and the end-of-file flag is set.  The length of the partial item read is not
+   provided, but could be inferred from the result of gztell().  This behavior
+   is the same as the behavior of fread() implementations in common libraries,
+   but it prevents the direct use of gzfread() to read a concurrently written
+   file, reseting and retrying on end-of-file, when size is not 1.
+*/
+
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+                                voidpc buf, unsigned len));
+/*
+     Writes the given number of uncompressed bytes into the compressed file.
+   gzwrite returns the number of uncompressed bytes written or 0 in case of
+   error.
+*/
+
+ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size,
+                                      z_size_t nitems, gzFile file));
+/*
+     gzfwrite() writes nitems items of size size from buf to file, duplicating
+   the interface of stdio's fwrite(), with size_t request and return types.  If
+   the library defines size_t, then z_size_t is identical to size_t.  If not,
+   then z_size_t is an unsigned integer type that can contain a pointer.
+
+     gzfwrite() returns the number of full items written of size size, or zero
+   if there was an error.  If the multiplication of size and nitems overflows,
+   i.e. the product does not fit in a z_size_t, then nothing is written, zero
+   is returned, and the error state is set to Z_STREAM_ERROR.
+*/
+
+ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
+/*
+     Converts, formats, and writes the arguments to the compressed file under
+   control of the format string, as in fprintf.  gzprintf returns the number of
+   uncompressed bytes actually written, or a negative zlib error code in case
+   of error.  The number of uncompressed bytes written is limited to 8191, or
+   one less than the buffer size given to gzbuffer().  The caller should assure
+   that this limit is not exceeded.  If it is exceeded, then gzprintf() will
+   return an error (0) with nothing written.  In this case, there may also be a
+   buffer overflow with unpredictable consequences, which is possible only if
+   zlib was compiled with the insecure functions sprintf() or vsprintf()
+   because the secure snprintf() or vsnprintf() functions were not available.
+   This can be determined using zlibCompileFlags().
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+     Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+
+     gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+     Reads bytes from the compressed file until len-1 characters are read, or a
+   newline character is read and transferred to buf, or an end-of-file
+   condition is encountered.  If any characters are read or if len == 1, the
+   string is terminated with a null character.  If no characters are read due
+   to an end-of-file or len < 1, then the buffer is left untouched.
+
+     gzgets returns buf which is a null-terminated string, or it returns NULL
+   for end-of-file or in case of error.  If there was an error, the contents at
+   buf are indeterminate.
+*/
+
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
+/*
+     Writes c, converted to an unsigned char, into the compressed file.  gzputc
+   returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+/*
+     Reads one byte from the compressed file.  gzgetc returns this byte or -1
+   in case of end of file or error.  This is implemented as a macro for speed.
+   As such, it does not do all of the checking the other functions do.  I.e.
+   it does not check to see if file is NULL, nor whether the structure file
+   points to has been clobbered or not.
+*/
+
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
+/*
+     Push one character back onto the stream to be read as the first character
+   on the next read.  At least one character of push-back is allowed.
+   gzungetc() returns the character pushed, or -1 on failure.  gzungetc() will
+   fail if c is -1, and may fail if a character has been pushed but not read
+   yet.  If gzungetc is used immediately after gzopen or gzdopen, at least the
+   output buffer size of pushed characters is allowed.  (See gzbuffer above.)
+   The pushed character will be discarded if the stream is repositioned with
+   gzseek() or gzrewind().
+*/
+
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
+/*
+     Flushes all pending output into the compressed file.  The parameter flush
+   is as in the deflate() function.  The return value is the zlib error number
+   (see function gzerror below).  gzflush is only permitted when writing.
+
+     If the flush parameter is Z_FINISH, the remaining data is written and the
+   gzip stream is completed in the output.  If gzwrite() is called again, a new
+   gzip stream will be started in the output.  gzread() is able to read such
+   concatenated gzip streams.
+
+     gzflush should be called only when strictly necessary because it will
+   degrade compression if called too often.
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+                                   z_off_t offset, int whence));
+
+     Sets the starting position for the next gzread or gzwrite on the given
+   compressed file.  The offset represents a number of bytes in the
+   uncompressed data stream.  The whence parameter is defined as in lseek(2);
+   the value SEEK_END is not supported.
+
+     If the file is opened for reading, this function is emulated but can be
+   extremely slow.  If the file is opened for writing, only forward seeks are
+   supported; gzseek then compresses a sequence of zeroes up to the new
+   starting position.
+
+     gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error, in
+   particular if the file is opened for writing and the new starting position
+   would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
+/*
+     Rewinds the given file. This function is supported only for reading.
+
+     gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
+
+     Returns the starting position for the next gzread or gzwrite on the given
+   compressed file.  This position represents a number of bytes in the
+   uncompressed data stream, and is zero when starting, even if appending or
+   reading a gzip stream from the middle of a file using gzdopen().
+
+     gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
+
+     Returns the current offset in the file being read or written.  This offset
+   includes the count of bytes that precede the gzip stream, for example when
+   appending or when using gzdopen() for reading.  When reading, the offset
+   does not include as yet unused buffered input.  This information can be used
+   for a progress indicator.  On error, gzoffset() returns -1.
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+     Returns true (1) if the end-of-file indicator has been set while reading,
+   false (0) otherwise.  Note that the end-of-file indicator is set only if the
+   read tried to go past the end of the input, but came up short.  Therefore,
+   just like feof(), gzeof() may return false even if there is no more data to
+   read, in the event that the last read request was for the exact number of
+   bytes remaining in the input file.  This will happen if the input file size
+   is an exact multiple of the buffer size.
+
+     If gzeof() returns true, then the read functions will return no more data,
+   unless the end-of-file indicator is reset by gzclearerr() and the input file
+   has grown since the previous end of file was detected.
+*/
+
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+/*
+     Returns true (1) if file is being copied directly while reading, or false
+   (0) if file is a gzip stream being decompressed.
+
+     If the input file is empty, gzdirect() will return true, since the input
+   does not contain a gzip stream.
+
+     If gzdirect() is used immediately after gzopen() or gzdopen() it will
+   cause buffers to be allocated to allow reading the file to determine if it
+   is a gzip file.  Therefore if gzbuffer() is used, it should be called before
+   gzdirect().
+
+     When writing, gzdirect() returns true (1) if transparent writing was
+   requested ("wT" for the gzopen() mode), or false (0) otherwise.  (Note:
+   gzdirect() is not needed when writing.  Transparent writing must be
+   explicitly requested, so the application already knows the answer.  When
+   linking statically, using gzdirect() will include all of the zlib code for
+   gzip file reading and decompression, which may not be desired.)
+*/
+
+ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
+/*
+     Flushes all pending output if necessary, closes the compressed file and
+   deallocates the (de)compression state.  Note that once file is closed, you
+   cannot call gzerror with file, since its structures have been deallocated.
+   gzclose must not be called more than once on the same file, just as free
+   must not be called more than once on the same allocation.
+
+     gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+   file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the
+   last read ended in the middle of a gzip stream, or Z_OK on success.
+*/
+
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+     Same as gzclose(), but gzclose_r() is only for use when reading, and
+   gzclose_w() is only for use when writing or appending.  The advantage to
+   using these instead of gzclose() is that they avoid linking in zlib
+   compression or decompression code that is not used when only reading or only
+   writing respectively.  If gzclose() is used, then both compression and
+   decompression code will be included the application when linking to a static
+   zlib library.
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+     Returns the error message for the last error which occurred on the given
+   compressed file.  errnum is set to zlib error number.  If an error occurred
+   in the file system and not in the compression library, errnum is set to
+   Z_ERRNO and the application may consult errno to get the exact error code.
+
+     The application must not modify the returned string.  Future calls to
+   this function may invalidate the previously returned string.  If file is
+   closed, then the string previously returned by gzerror will no longer be
+   available.
+
+     gzerror() should be used to distinguish errors from end-of-file for those
+   functions above that do not distinguish those cases in their return values.
+*/
+
+ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+/*
+     Clears the error and end-of-file flags for file.  This is analogous to the
+   clearerr() function in stdio.  This is useful for continuing to read a gzip
+   file that is being written concurrently.
+*/
+
+#endif /* !Z_SOLO */
+
+                        /* checksum functions */
+
+/*
+     These functions are not related to compression but are exported
+   anyway because they might be useful in applications using the compression
+   library.
+*/
+
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+/*
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum.  If buf is Z_NULL, this function returns the
+   required initial value for the checksum.
+
+     An Adler-32 checksum is almost as reliable as a CRC-32 but can be computed
+   much faster.
+
+   Usage example:
+
+     uLong adler = adler32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       adler = adler32(adler, buffer, length);
+     }
+     if (adler != original_adler) error();
+*/
+
+ZEXTERN uLong ZEXPORT adler32_z OF((uLong adler, const Bytef *buf,
+                                    z_size_t len));
+/*
+     Same as adler32(), but with a size_t length.
+*/
+
+/*
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+                                          z_off_t len2));
+
+     Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
+   and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+   each, adler1 and adler2.  adler32_combine() returns the Adler-32 checksum of
+   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.  Note
+   that the z_off_t type (like off_t) is a signed integer.  If len2 is
+   negative, the result has no meaning or utility.
+*/
+
+ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
+/*
+     Update a running CRC-32 with the bytes buf[0..len-1] and return the
+   updated CRC-32.  If buf is Z_NULL, this function returns the required
+   initial value for the crc.  Pre- and post-conditioning (one's complement) is
+   performed within this function so it shouldn't be done by the application.
+
+   Usage example:
+
+     uLong crc = crc32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       crc = crc32(crc, buffer, length);
+     }
+     if (crc != original_crc) error();
+*/
+
+ZEXTERN uLong ZEXPORT crc32_z OF((uLong adler, const Bytef *buf,
+                                  z_size_t len));
+/*
+     Same as crc32(), but with a size_t length.
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+     Combine two CRC-32 check values into one.  For two sequences of bytes,
+   seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+   calculated for each, crc1 and crc2.  crc32_combine() returns the CRC-32
+   check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+   len2.
+*/
+
+
+                        /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
+                                      int windowBits, int memLevel,
+                                      int strategy, const char *version,
+                                      int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                      const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+                                         unsigned char FAR *window,
+                                         const char *version,
+                                         int stream_size));
+#ifdef Z_PREFIX_SET
+#  define z_deflateInit(strm, level) \
+          deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_inflateInit(strm) \
+          inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+          deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                        (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_inflateInit2(strm, windowBits) \
+          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                        (int)sizeof(z_stream))
+#  define z_inflateBackInit(strm, windowBits, window) \
+          inflateBackInit_((strm), (windowBits), (window), \
+                           ZLIB_VERSION, (int)sizeof(z_stream))
+#else
+#  define deflateInit(strm, level) \
+          deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define inflateInit(strm) \
+          inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+          deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                        (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define inflateInit2(strm, windowBits) \
+          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                        (int)sizeof(z_stream))
+#  define inflateBackInit(strm, windowBits, window) \
+          inflateBackInit_((strm), (windowBits), (window), \
+                           ZLIB_VERSION, (int)sizeof(z_stream))
+#endif
+
+#ifndef Z_SOLO
+
+/* gzgetc() macro and its supporting function and exposed data structure.  Note
+ * that the real internal state is much larger than the exposed structure.
+ * This abbreviated structure exposes just enough for the gzgetc() macro.  The
+ * user should not mess with these exposed elements, since their names or
+ * behavior could change in the future, perhaps even capriciously.  They can
+ * only be used by the gzgetc() macro.  You have been warned.
+ */
+struct gzFile_s {
+    unsigned have;
+    unsigned char *next;
+    z_off64_t pos;
+};
+ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
+#ifdef Z_PREFIX_SET
+#  undef z_gzgetc
+#  define z_gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
+#else
+#  define gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
+#endif
+
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#ifdef Z_LARGE64
+   ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+   ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+   ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+   ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
+#  ifdef Z_PREFIX_SET
+#    define z_gzopen z_gzopen64
+#    define z_gzseek z_gzseek64
+#    define z_gztell z_gztell64
+#    define z_gzoffset z_gzoffset64
+#    define z_adler32_combine z_adler32_combine64
+#    define z_crc32_combine z_crc32_combine64
+#  else
+#    define gzopen gzopen64
+#    define gzseek gzseek64
+#    define gztell gztell64
+#    define gzoffset gzoffset64
+#    define adler32_combine adler32_combine64
+#    define crc32_combine crc32_combine64
+#  endif
+#  ifndef Z_LARGE64
+     ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+     ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+     ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+     ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+#  endif
+#else
+   ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+   ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+   ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+   ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#endif
+
+#else /* Z_SOLO */
+
+   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+
+#endif /* !Z_SOLO */
+
+/* undocumented functions */
+ZEXTERN const char   * ZEXPORT zError           OF((int));
+ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
+ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table    OF((void));
+ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
+ZEXTERN int            ZEXPORT inflateValidate OF((z_streamp, int));
+ZEXTERN unsigned long  ZEXPORT inflateCodesUsed OF ((z_streamp));
+ZEXTERN int            ZEXPORT inflateResetKeep OF((z_streamp));
+ZEXTERN int            ZEXPORT deflateResetKeep OF((z_streamp));
+#if (defined(_WIN32) || defined(__CYGWIN__)) && !defined(Z_SOLO)
+ZEXTERN gzFile         ZEXPORT gzopen_w OF((const wchar_t *path,
+                                            const char *mode));
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifndef Z_SOLO
+ZEXTERN int            ZEXPORTVA gzvprintf Z_ARG((gzFile file,
+                                                  const char *format,
+                                                  va_list va));
+#  endif
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ZLIB_H */
diff --git a/lib/zlib/zlib.mk b/lib/zlib/zlib.mk
new file mode 100644
index 0000000..98d4efa
--- /dev/null
+++ b/lib/zlib/zlib.mk
@@ -0,0 +1,25 @@
+#
+# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+ZLIB_PATH	:=	lib/zlib
+
+# Imported from zlib 1.2.11 (do not modify them)
+ZLIB_SOURCES	:=	$(addprefix $(ZLIB_PATH)/,	\
+					adler32.c	\
+					crc32.c		\
+					inffast.c	\
+					inflate.c	\
+					inftrees.c	\
+					zutil.c)
+
+# Implemented for TF
+ZLIB_SOURCES	+=	$(addprefix $(ZLIB_PATH)/,	\
+					tf_gunzip.c)
+
+INCLUDES	+=	-Iinclude/lib/zlib
+
+# REVISIT: the following flags need not be given globally
+TF_CFLAGS	+=	-DZ_SOLO -DDEF_WBITS=31
diff --git a/lib/zlib/zutil.c b/lib/zlib/zutil.c
new file mode 100644
index 0000000..a76c6b0
--- /dev/null
+++ b/lib/zlib/zutil.c
@@ -0,0 +1,325 @@
+/* zutil.c -- target dependent utility functions for the compression library
+ * Copyright (C) 1995-2017 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zutil.h"
+#ifndef Z_SOLO
+#  include "gzguts.h"
+#endif
+
+z_const char * const z_errmsg[10] = {
+    (z_const char *)"need dictionary",     /* Z_NEED_DICT       2  */
+    (z_const char *)"stream end",          /* Z_STREAM_END      1  */
+    (z_const char *)"",                    /* Z_OK              0  */
+    (z_const char *)"file error",          /* Z_ERRNO         (-1) */
+    (z_const char *)"stream error",        /* Z_STREAM_ERROR  (-2) */
+    (z_const char *)"data error",          /* Z_DATA_ERROR    (-3) */
+    (z_const char *)"insufficient memory", /* Z_MEM_ERROR     (-4) */
+    (z_const char *)"buffer error",        /* Z_BUF_ERROR     (-5) */
+    (z_const char *)"incompatible version",/* Z_VERSION_ERROR (-6) */
+    (z_const char *)""
+};
+
+
+const char * ZEXPORT zlibVersion()
+{
+    return ZLIB_VERSION;
+}
+
+uLong ZEXPORT zlibCompileFlags()
+{
+    uLong flags;
+
+    flags = 0;
+    switch ((int)(sizeof(uInt))) {
+    case 2:     break;
+    case 4:     flags += 1;     break;
+    case 8:     flags += 2;     break;
+    default:    flags += 3;
+    }
+    switch ((int)(sizeof(uLong))) {
+    case 2:     break;
+    case 4:     flags += 1 << 2;        break;
+    case 8:     flags += 2 << 2;        break;
+    default:    flags += 3 << 2;
+    }
+    switch ((int)(sizeof(voidpf))) {
+    case 2:     break;
+    case 4:     flags += 1 << 4;        break;
+    case 8:     flags += 2 << 4;        break;
+    default:    flags += 3 << 4;
+    }
+    switch ((int)(sizeof(z_off_t))) {
+    case 2:     break;
+    case 4:     flags += 1 << 6;        break;
+    case 8:     flags += 2 << 6;        break;
+    default:    flags += 3 << 6;
+    }
+#ifdef ZLIB_DEBUG
+    flags += 1 << 8;
+#endif
+#if defined(ASMV) || defined(ASMINF)
+    flags += 1 << 9;
+#endif
+#ifdef ZLIB_WINAPI
+    flags += 1 << 10;
+#endif
+#ifdef BUILDFIXED
+    flags += 1 << 12;
+#endif
+#ifdef DYNAMIC_CRC_TABLE
+    flags += 1 << 13;
+#endif
+#ifdef NO_GZCOMPRESS
+    flags += 1L << 16;
+#endif
+#ifdef NO_GZIP
+    flags += 1L << 17;
+#endif
+#ifdef PKZIP_BUG_WORKAROUND
+    flags += 1L << 20;
+#endif
+#ifdef FASTEST
+    flags += 1L << 21;
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifdef NO_vsnprintf
+    flags += 1L << 25;
+#    ifdef HAS_vsprintf_void
+    flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_vsnprintf_void
+    flags += 1L << 26;
+#    endif
+#  endif
+#else
+    flags += 1L << 24;
+#  ifdef NO_snprintf
+    flags += 1L << 25;
+#    ifdef HAS_sprintf_void
+    flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_snprintf_void
+    flags += 1L << 26;
+#    endif
+#  endif
+#endif
+    return flags;
+}
+
+#ifdef ZLIB_DEBUG
+#include <stdlib.h>
+#  ifndef verbose
+#    define verbose 0
+#  endif
+int ZLIB_INTERNAL z_verbose = verbose;
+
+void ZLIB_INTERNAL z_error (m)
+    char *m;
+{
+    fprintf(stderr, "%s\n", m);
+    exit(1);
+}
+#endif
+
+/* exported to allow conversion of error code to string for compress() and
+ * uncompress()
+ */
+const char * ZEXPORT zError(err)
+    int err;
+{
+    return ERR_MSG(err);
+}
+
+#if defined(_WIN32_WCE)
+    /* The Microsoft C Run-Time Library for Windows CE doesn't have
+     * errno.  We define it as a global variable to simplify porting.
+     * Its value is always 0 and should not be used.
+     */
+    int errno = 0;
+#endif
+
+#ifndef HAVE_MEMCPY
+
+void ZLIB_INTERNAL zmemcpy(dest, source, len)
+    Bytef* dest;
+    const Bytef* source;
+    uInt  len;
+{
+    if (len == 0) return;
+    do {
+        *dest++ = *source++; /* ??? to be unrolled */
+    } while (--len != 0);
+}
+
+int ZLIB_INTERNAL zmemcmp(s1, s2, len)
+    const Bytef* s1;
+    const Bytef* s2;
+    uInt  len;
+{
+    uInt j;
+
+    for (j = 0; j < len; j++) {
+        if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
+    }
+    return 0;
+}
+
+void ZLIB_INTERNAL zmemzero(dest, len)
+    Bytef* dest;
+    uInt  len;
+{
+    if (len == 0) return;
+    do {
+        *dest++ = 0;  /* ??? to be unrolled */
+    } while (--len != 0);
+}
+#endif
+
+#ifndef Z_SOLO
+
+#ifdef SYS16BIT
+
+#ifdef __TURBOC__
+/* Turbo C in 16-bit mode */
+
+#  define MY_ZCALLOC
+
+/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
+ * and farmalloc(64K) returns a pointer with an offset of 8, so we
+ * must fix the pointer. Warning: the pointer must be put back to its
+ * original form in order to free it, use zcfree().
+ */
+
+#define MAX_PTR 10
+/* 10*64K = 640K */
+
+local int next_ptr = 0;
+
+typedef struct ptr_table_s {
+    voidpf org_ptr;
+    voidpf new_ptr;
+} ptr_table;
+
+local ptr_table table[MAX_PTR];
+/* This table is used to remember the original form of pointers
+ * to large buffers (64K). Such pointers are normalized with a zero offset.
+ * Since MSDOS is not a preemptive multitasking OS, this table is not
+ * protected from concurrent access. This hack doesn't work anyway on
+ * a protected system like OS/2. Use Microsoft C instead.
+ */
+
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
+{
+    voidpf buf;
+    ulg bsize = (ulg)items*size;
+
+    (void)opaque;
+
+    /* If we allocate less than 65520 bytes, we assume that farmalloc
+     * will return a usable pointer which doesn't have to be normalized.
+     */
+    if (bsize < 65520L) {
+        buf = farmalloc(bsize);
+        if (*(ush*)&buf != 0) return buf;
+    } else {
+        buf = farmalloc(bsize + 16L);
+    }
+    if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
+    table[next_ptr].org_ptr = buf;
+
+    /* Normalize the pointer to seg:0 */
+    *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
+    *(ush*)&buf = 0;
+    table[next_ptr++].new_ptr = buf;
+    return buf;
+}
+
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
+{
+    int n;
+
+    (void)opaque;
+
+    if (*(ush*)&ptr != 0) { /* object < 64K */
+        farfree(ptr);
+        return;
+    }
+    /* Find the original pointer */
+    for (n = 0; n < next_ptr; n++) {
+        if (ptr != table[n].new_ptr) continue;
+
+        farfree(table[n].org_ptr);
+        while (++n < next_ptr) {
+            table[n-1] = table[n];
+        }
+        next_ptr--;
+        return;
+    }
+    Assert(0, "zcfree: ptr not found");
+}
+
+#endif /* __TURBOC__ */
+
+
+#ifdef M_I86
+/* Microsoft C in 16-bit mode */
+
+#  define MY_ZCALLOC
+
+#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
+#  define _halloc  halloc
+#  define _hfree   hfree
+#endif
+
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
+{
+    (void)opaque;
+    return _halloc((long)items, size);
+}
+
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
+{
+    (void)opaque;
+    _hfree(ptr);
+}
+
+#endif /* M_I86 */
+
+#endif /* SYS16BIT */
+
+
+#ifndef MY_ZCALLOC /* Any system without a special alloc function */
+
+#ifndef STDC
+extern voidp  malloc OF((uInt size));
+extern voidp  calloc OF((uInt items, uInt size));
+extern void   free   OF((voidpf ptr));
+#endif
+
+voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
+    voidpf opaque;
+    unsigned items;
+    unsigned size;
+{
+    (void)opaque;
+    return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
+                              (voidpf)calloc(items, size);
+}
+
+void ZLIB_INTERNAL zcfree (opaque, ptr)
+    voidpf opaque;
+    voidpf ptr;
+{
+    (void)opaque;
+    free(ptr);
+}
+
+#endif /* MY_ZCALLOC */
+
+#endif /* !Z_SOLO */
diff --git a/lib/zlib/zutil.h b/lib/zlib/zutil.h
new file mode 100644
index 0000000..b079ea6
--- /dev/null
+++ b/lib/zlib/zutil.h
@@ -0,0 +1,271 @@
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id$ */
+
+#ifndef ZUTIL_H
+#define ZUTIL_H
+
+#ifdef HAVE_HIDDEN
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif
+
+#include "zlib.h"
+
+#if defined(STDC) && !defined(Z_SOLO)
+#  if !(defined(_WIN32_WCE) && defined(_MSC_VER))
+#    include <stddef.h>
+#  endif
+#  include <string.h>
+#  include <stdlib.h>
+#endif
+
+#ifdef Z_SOLO
+   typedef long ptrdiff_t;  /* guess -- will be caught if guess is wrong */
+#endif
+
+#ifndef local
+#  define local static
+#endif
+/* since "static" is used to mean two completely different things in C, we
+   define "local" for the non-static meaning of "static", for readability
+   (compile with -Dlocal if your debugger can't find static symbols) */
+
+typedef unsigned char  uch;
+typedef uch FAR uchf;
+typedef unsigned short ush;
+typedef ush FAR ushf;
+typedef unsigned long  ulg;
+
+extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+/* (size given to avoid silly warnings with Visual C++) */
+
+#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
+
+#define ERR_RETURN(strm,err) \
+  return (strm->msg = ERR_MSG(err), (err))
+/* To be used only when the state is known to be valid */
+
+        /* common constants */
+
+#ifndef DEF_WBITS
+#  define DEF_WBITS MAX_WBITS
+#endif
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
+#else
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#endif
+/* default memLevel */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES    2
+/* The three kinds of block type */
+
+#define MIN_MATCH  3
+#define MAX_MATCH  258
+/* The minimum and maximum match lengths */
+
+#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
+
+        /* target dependencies */
+
+#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
+#  define OS_CODE  0x00
+#  ifndef Z_SOLO
+#    if defined(__TURBOC__) || defined(__BORLANDC__)
+#      if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+         /* Allow compilation with ANSI keywords only enabled */
+         void _Cdecl farfree( void *block );
+         void *_Cdecl farmalloc( unsigned long nbytes );
+#      else
+#        include <alloc.h>
+#      endif
+#    else /* MSC or DJGPP */
+#      include <malloc.h>
+#    endif
+#  endif
+#endif
+
+#ifdef AMIGA
+#  define OS_CODE  1
+#endif
+
+#if defined(VAXC) || defined(VMS)
+#  define OS_CODE  2
+#  define F_OPEN(name, mode) \
+     fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
+#endif
+
+#ifdef __370__
+#  if __TARGET_LIB__ < 0x20000000
+#    define OS_CODE 4
+#  elif __TARGET_LIB__ < 0x40000000
+#    define OS_CODE 11
+#  else
+#    define OS_CODE 8
+#  endif
+#endif
+
+#if defined(ATARI) || defined(atarist)
+#  define OS_CODE  5
+#endif
+
+#ifdef OS2
+#  define OS_CODE  6
+#  if defined(M_I86) && !defined(Z_SOLO)
+#    include <malloc.h>
+#  endif
+#endif
+
+#if defined(MACOS) || defined(TARGET_OS_MAC)
+#  define OS_CODE  7
+#  ifndef Z_SOLO
+#    if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+#      include <unix.h> /* for fdopen */
+#    else
+#      ifndef fdopen
+#        define fdopen(fd,mode) NULL /* No fdopen() */
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __acorn
+#  define OS_CODE 13
+#endif
+
+#if defined(WIN32) && !defined(__CYGWIN__)
+#  define OS_CODE  10
+#endif
+
+#ifdef _BEOS_
+#  define OS_CODE  16
+#endif
+
+#ifdef __TOS_OS400__
+#  define OS_CODE 18
+#endif
+
+#ifdef __APPLE__
+#  define OS_CODE 19
+#endif
+
+#if defined(_BEOS_) || defined(RISCOS)
+#  define fdopen(fd,mode) NULL /* No fdopen() */
+#endif
+
+#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX
+#  if defined(_WIN32_WCE)
+#    define fdopen(fd,mode) NULL /* No fdopen() */
+#    ifndef _PTRDIFF_T_DEFINED
+       typedef int ptrdiff_t;
+#      define _PTRDIFF_T_DEFINED
+#    endif
+#  else
+#    define fdopen(fd,type)  _fdopen(fd,type)
+#  endif
+#endif
+
+#if defined(__BORLANDC__) && !defined(MSDOS)
+  #pragma warn -8004
+  #pragma warn -8008
+  #pragma warn -8066
+#endif
+
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_WIN32) && \
+    (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
+    ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+    ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+#endif
+
+        /* common defaults */
+
+#ifndef OS_CODE
+#  define OS_CODE  3     /* assume Unix */
+#endif
+
+#ifndef F_OPEN
+#  define F_OPEN(name, mode) fopen((name), (mode))
+#endif
+
+         /* functions */
+
+#if defined(pyr) || defined(Z_SOLO)
+#  define NO_MEMCPY
+#endif
+#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
+ /* Use our own functions for small and medium model with MSC <= 5.0.
+  * You may have to use the same strategy for Borland C (untested).
+  * The __SC__ check is for Symantec.
+  */
+#  define NO_MEMCPY
+#endif
+#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
+#  define HAVE_MEMCPY
+#endif
+#ifdef HAVE_MEMCPY
+#  ifdef SMALL_MEDIUM /* MSDOS small or medium model */
+#    define zmemcpy _fmemcpy
+#    define zmemcmp _fmemcmp
+#    define zmemzero(dest, len) _fmemset(dest, 0, len)
+#  else
+#    define zmemcpy memcpy
+#    define zmemcmp memcmp
+#    define zmemzero(dest, len) memset(dest, 0, len)
+#  endif
+#else
+   void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
+   int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
+   void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
+#endif
+
+/* Diagnostic functions */
+#ifdef ZLIB_DEBUG
+#  include <stdio.h>
+   extern int ZLIB_INTERNAL z_verbose;
+   extern void ZLIB_INTERNAL z_error OF((char *m));
+#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
+#  define Trace(x) {if (z_verbose>=0) fprintf x ;}
+#  define Tracev(x) {if (z_verbose>0) fprintf x ;}
+#  define Tracevv(x) {if (z_verbose>1) fprintf x ;}
+#  define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
+#else
+#  define Assert(cond,msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c,x)
+#  define Tracecv(c,x)
+#endif
+
+#ifndef Z_SOLO
+   voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
+                                    unsigned size));
+   void ZLIB_INTERNAL zcfree  OF((voidpf opaque, voidpf ptr));
+#endif
+
+#define ZALLOC(strm, items, size) \
+           (*((strm)->zalloc))((strm)->opaque, (items), (size))
+#define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
+#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
+
+/* Reverse the bytes in a 32-bit value */
+#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+                    (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
+
+#endif /* ZUTIL_H */
diff --git a/make_helpers/build_macros.mk b/make_helpers/build_macros.mk
index a4fbc5a..0d2cf10 100644
--- a/make_helpers/build_macros.mk
+++ b/make_helpers/build_macros.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@@ -98,75 +98,90 @@
     ${BUILD_PLAT}/bl$(1).bin
 endef
 
-# FIP_ADD_PAYLOAD appends the command line arguments required by fiptool
-# to package a new payload. Optionally, it adds the dependency on this payload
+# TOOL_ADD_PAYLOAD appends the command line arguments required by fiptool to
+# package a new payload and/or by cert_create to generate certificate.
+# Optionally, it adds the dependency on this payload
 #   $(1) = payload filename (i.e. bl31.bin)
 #   $(2) = command line option for the specified payload (i.e. --soc-fw)
-#   $(3) = fip target dependency (optional) (i.e. bl31)
-define FIP_ADD_PAYLOAD
-    $(eval FIP_ARGS += $(2) $(1))
-    $(eval $(if $(3),FIP_DEPS += $(3)))
+#   $(3) = tool target dependency (optional) (ex. build/fvp/release/bl31.bin)
+#   $(4) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
+define TOOL_ADD_PAYLOAD
+    $(4)FIP_ARGS += $(2) $(1)
+    $(if $(3),$(4)FIP_DEPS += $(3))
+    $(4)CRT_ARGS += $(2) $(1)
+    $(if $(3),$(4)CRT_DEPS += $(3))
 endef
 
+# TOOL_ADD_IMG_PAYLOAD works like TOOL_ADD_PAYLOAD, but applies image filters
+# before passing them to host tools if BL*_PRE_TOOL_FILTER is defined.
+#   $(1) = image_type (scp_bl2, bl33, etc.)
+#   $(2) = payload filepath (ex. build/fvp/release/bl31.bin)
+#   $(3) = command line option for the specified payload (ex. --soc-fw)
+#   $(4) = tool target dependency (optional) (ex. build/fvp/release/bl31.bin)
+#   $(5) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
+
+define TOOL_ADD_IMG_PAYLOAD
+
+$(eval PRE_TOOL_FILTER := $($(call uppercase,$(1))_PRE_TOOL_FILTER))
+
+ifneq ($(PRE_TOOL_FILTER),)
+
+$(eval PROCESSED_PATH := $(BUILD_PLAT)/$(1).bin$($(PRE_TOOL_FILTER)_SUFFIX))
+
+$(call $(PRE_TOOL_FILTER)_RULE,$(PROCESSED_PATH),$(2))
+
+$(PROCESSED_PATH): $(4)
+
+$(call TOOL_ADD_PAYLOAD,$(PROCESSED_PATH),$(3),$(PROCESSED_PATH),$(5))
+
+else
+$(call TOOL_ADD_PAYLOAD,$(2),$(3),$(4),$(5))
+endif
+endef
+
 # CERT_ADD_CMD_OPT adds a new command line option to the cert_create invocation
 #   $(1) = parameter filename
 #   $(2) = cert_create command line option for the specified parameter
-#   $(3) = input parameter (false if empty)
+#   $(3) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
 define CERT_ADD_CMD_OPT
-    $(eval $(if $(3),CRT_DEPS += $(1)))
-    $(eval CRT_ARGS += $(2) $(1))
+    $(3)CRT_ARGS += $(2) $(1)
 endef
 
-# FIP_ADD_IMG allows the platform to specify an image to be packed in the FIP
-# using a build option. It also adds a dependency on the image file, aborting
-# the build if the file does not exist.
-#   $(1) = build option to specify the image filename (SCP_BL2, BL33, etc)
+# TOOL_ADD_IMG allows the platform to specify an external image to be packed
+# in the FIP and/or for which certificate is generated. It also adds a
+# dependency on the image file, aborting the build if the file does not exist.
+#   $(1) = image_type (scp_bl2, bl33, etc.)
 #   $(2) = command line option for fiptool (--scp-fw, --nt-fw, etc)
+#   $(3) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
 # Example:
-#   $(eval $(call FIP_ADD_IMG,BL33,--nt-fw))
-define FIP_ADD_IMG
-    CRT_DEPS += check_$(1)
-    FIP_DEPS += check_$(1)
-    $(call FIP_ADD_PAYLOAD,$(value $(1)),$(2))
+#   $(eval $(call TOOL_ADD_IMG,bl33,--nt-fw))
+define TOOL_ADD_IMG
+    # Build option to specify the image filename (SCP_BL2, BL33, etc)
+    # This is the uppercase form of the first parameter
+    $(eval _V := $(call uppercase,$(1)))
+
+    $(3)CRT_DEPS += check_$(1)
+    $(3)FIP_DEPS += check_$(1)
+    $(call TOOL_ADD_IMG_PAYLOAD,$(1),$(value $(_V)),$(2),,$(3))
 
 .PHONY: check_$(1)
 check_$(1):
-	$$(if $(value $(1)),,$$(error "Platform '${PLAT}' requires $(1). Please set $(1) to point to the right file"))
+	$$(if $(value $(_V)),,$$(error "Platform '${PLAT}' requires $(_V). Please set $(_V) to point to the right file"))
+	$$(if $(wildcard $(value $(_V))),,$$(error '$(_V)=$(value $(_V))' was specified, but '$(value $(_V))' does not exist))
 endef
 
-# FWU_FIP_ADD_PAYLOAD appends the command line arguments required by fiptool
-# to package a new FWU payload. Optionally, it  adds the dependency on this payload
-#   $(1) = payload filename (e.g. ns_bl2u.bin)
-#   $(2) = command line option for the specified payload (e.g. --fwu)
-#   $(3) = fip target dependency (optional) (e.g. ns_bl2u)
-define FWU_FIP_ADD_PAYLOAD
-    $(eval $(if $(3),FWU_FIP_DEPS += $(3)))
-    $(eval FWU_FIP_ARGS += $(2) $(1))
-endef
+################################################################################
+# Generic image processing filters
+################################################################################
 
-# FWU_CERT_ADD_CMD_OPT adds a new command line option to the cert_create invocation
-#   $(1) = parameter filename
-#   $(2) = cert_create command line option for the specified parameter
-#   $(3) = input parameter (false if empty)
-define FWU_CERT_ADD_CMD_OPT
-    $(eval $(if $(3),FWU_CRT_DEPS += $(1)))
-    $(eval FWU_CRT_ARGS += $(2) $(1))
+# GZIP
+define GZIP_RULE
+$(1): $(2)
+	@echo "  GZIP    $$@"
+	$(Q)gzip -n -f -9 $$< --stdout > $$@
 endef
 
-# FWU_FIP_ADD_IMG allows the platform to pack a binary image in the FWU FIP
-#   $(1) build option to specify the image filename (BL2U, NS_BL2U, etc)
-#   $(2) command line option for fiptool (--ap-fwu-cfg, --fwu, etc)
-# Example:
-#   $(eval $(call FWU_FIP_ADD_IMG,BL2U,--ap-fwu-cfg))
-define FWU_FIP_ADD_IMG
-    FWU_CRT_DEPS += check_$(1)
-    FWU_FIP_DEPS += check_$(1)
-    $(call FWU_FIP_ADD_PAYLOAD,$(value $(1)),$(2))
-
-.PHONY: check_$(1)
-check_$(1):
-	$$(if $(value $(1)),,$$(error "Platform '${PLAT}' requires $(1). Please set $(1) to point to the right file"))
-endef
+GZIP_SUFFIX := .gz
 
 ################################################################################
 # Auxiliary macros to build TF images from sources
@@ -254,16 +269,6 @@
         $(notdir $(patsubst %.S,%.o,$(filter %.S,$(1))))
 endef
 
-
-# MAKE_TOOL_ARGS macro defines the command line arguments for fiptool for
-# each BL image. Arguments:
-#   $(1) = BL stage (2, 30, 31, 32, 33)
-#   $(2) = Binary file
-#   $(3) = FIP command line option (if empty, image will not be included in the FIP)
-define MAKE_TOOL_ARGS
-        $(if $(3),$(eval $(call FIP_ADD_PAYLOAD,$(2),--$(3),bl$(1))))
-endef
-
 # Allow overriding the timestamp, for example for reproducible builds, or to
 # synchronize timestamps across multiple projects.
 # This must be set to a C string (including quotes where applicable).
@@ -273,6 +278,7 @@
 # Arguments:
 #   $(1) = BL stage (2, 2u, 30, 31, 32, 33)
 #   $(2) = FIP command line option (if empty, image will not be included in the FIP)
+#   $(3) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
 define MAKE_BL
         $(eval BUILD_DIR  := ${BUILD_PLAT}/bl$(1))
         $(eval BL_SOURCES := $(BL$(call uppercase,$(1))_SOURCES))
@@ -334,7 +340,7 @@
 
 all: bl$(1)
 
-$(eval $(call MAKE_TOOL_ARGS,$(1),$(BIN),$(2)))
+$(if $(2),$(call TOOL_ADD_IMG_PAYLOAD,bl$(1),$(BIN),--$(2),$(BIN),$(3)))
 
 endef
 
diff --git a/make_helpers/tbbr/tbbr_tools.mk b/make_helpers/tbbr/tbbr_tools.mk
index cda8d72..afc007a 100644
--- a/make_helpers/tbbr/tbbr_tools.mk
+++ b/make_helpers/tbbr/tbbr_tools.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@@ -43,12 +43,10 @@
 $(eval $(call CERT_ADD_CMD_OPT,${NTFW_NVCTR_VAL},--ntfw-nvctr))
 
 # Add Trusted Key certificate to the fiptool and cert_create command line options
-$(eval $(call FIP_ADD_PAYLOAD,${TRUSTED_KEY_CERT},--trusted-key-cert))
-$(eval $(call CERT_ADD_CMD_OPT,${TRUSTED_KEY_CERT},--trusted-key-cert))
+$(eval $(call TOOL_ADD_PAYLOAD,${TRUSTED_KEY_CERT},--trusted-key-cert))
 
 # Add fwu certificate to the fiptool and cert_create command line options
-$(eval $(call FWU_FIP_ADD_PAYLOAD,${FWU_CERT},--fwu-cert))
-$(eval $(call FWU_CERT_ADD_CMD_OPT,${FWU_CERT},--fwu-cert))
+$(eval $(call TOOL_ADD_PAYLOAD,${FWU_CERT},--fwu-cert,,FWU_))
 
 # Add the keys to the cert_create command line options (private keys are NOT
 # packed in the FIP). Developers can use their own keys by specifying the proper
@@ -56,78 +54,42 @@
 $(if ${KEY_ALG},$(eval $(call CERT_ADD_CMD_OPT,${KEY_ALG},--key-alg)))
 $(if ${HASH_ALG},$(eval $(call CERT_ADD_CMD_OPT,${HASH_ALG},--hash-alg)))
 $(if ${ROT_KEY},$(eval $(call CERT_ADD_CMD_OPT,${ROT_KEY},--rot-key)))
-$(if ${ROT_KEY},$(eval $(call FWU_CERT_ADD_CMD_OPT,${ROT_KEY},--rot-key)))
+$(if ${ROT_KEY},$(eval $(call CERT_ADD_CMD_OPT,${ROT_KEY},--rot-key,FWU_)))
 $(if ${TRUSTED_WORLD_KEY},$(eval $(call CERT_ADD_CMD_OPT,${TRUSTED_WORLD_KEY},--trusted-world-key)))
 $(if ${NON_TRUSTED_WORLD_KEY},$(eval $(call CERT_ADD_CMD_OPT,${NON_TRUSTED_WORLD_KEY},--non-trusted-world-key)))
 
-# Add the BL2 CoT (image cert + image)
-$(if ${BL2},$(eval $(call CERT_ADD_CMD_OPT,${BL2},--tb-fw,true)),\
-            $(eval $(call CERT_ADD_CMD_OPT,$(call IMG_BIN,2),--tb-fw,true)))
-$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/tb_fw.crt,--tb-fw-cert))
+
+# Add the BL2 CoT (image cert)
 ifeq (${BL2_AT_EL3}, 0)
-$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/tb_fw.crt,--tb-fw-cert))
+$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/tb_fw.crt,--tb-fw-cert))
 endif
 
-# Add the SCP_BL2 CoT (key cert + img cert + image)
+# Add the SCP_BL2 CoT (key cert + img cert)
 ifneq (${SCP_BL2},)
-    $(eval $(call CERT_ADD_CMD_OPT,${SCP_BL2},--scp-fw,true))
     $(if ${SCP_BL2_KEY},$(eval $(call CERT_ADD_CMD_OPT,${SCP_BL2_KEY},--scp-fw-key)))
-    $(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/scp_fw_content.crt,--scp-fw-cert))
-    $(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/scp_fw_key.crt,--scp-fw-key-cert))
-    $(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/scp_fw_content.crt,--scp-fw-cert))
-    $(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/scp_fw_key.crt,--scp-fw-key-cert))
+    $(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/scp_fw_content.crt,--scp-fw-cert))
+    $(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/scp_fw_key.crt,--scp-fw-key-cert))
 endif
 
 ifeq (${ARCH},aarch64)
 ifeq (${NEED_BL31},yes)
-# Add the BL31 CoT (key cert + img cert + image)
-$(if ${BL31},$(eval $(call CERT_ADD_CMD_OPT,${BL31},--soc-fw,true)),\
-             $(eval $(call CERT_ADD_CMD_OPT,$(call IMG_BIN,31),--soc-fw,true)))
+# Add the BL31 CoT (key cert + img cert)
 $(if ${BL31_KEY},$(eval $(call CERT_ADD_CMD_OPT,${BL31_KEY},--soc-fw-key)))
-$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/soc_fw_content.crt,--soc-fw-cert))
-$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/soc_fw_key.crt,--soc-fw-key-cert))
-$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/soc_fw_content.crt,--soc-fw-cert))
-$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/soc_fw_key.crt,--soc-fw-key-cert))
+$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/soc_fw_content.crt,--soc-fw-cert))
+$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/soc_fw_key.crt,--soc-fw-key-cert))
 endif
 endif
 
-# Add the BL32 CoT (key cert + img cert + image)
+# Add the BL32 CoT (key cert + img cert)
 ifeq (${NEED_BL32},yes)
-    $(if ${BL32},$(eval $(call CERT_ADD_CMD_OPT,${BL32},--tos-fw,true)),\
-                 $(if ${BL32_SOURCES},$(eval $(call CERT_ADD_CMD_OPT,$(call IMG_BIN,32),--tos-fw,true))))
     $(if ${BL32_KEY},$(eval $(call CERT_ADD_CMD_OPT,${BL32_KEY},--tos-fw-key)))
-    $(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/tos_fw_content.crt,--tos-fw-cert))
-    $(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/tos_fw_key.crt,--tos-fw-key-cert))
-    $(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/tos_fw_content.crt,--tos-fw-cert))
-    $(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/tos_fw_key.crt,--tos-fw-key-cert))
-ifneq (${BL32_EXTRA1},)
-    $(eval $(call CERT_ADD_CMD_OPT,${BL32_EXTRA1},--tos-fw-extra1,true))
-endif
-ifneq (${BL32_EXTRA2},)
-    $(eval $(call CERT_ADD_CMD_OPT,${BL32_EXTRA2},--tos-fw-extra2,true))
-endif
+    $(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/tos_fw_content.crt,--tos-fw-cert))
+    $(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/tos_fw_key.crt,--tos-fw-key-cert))
 endif
 
-# Add the BL33 CoT (key cert + img cert + image)
+# Add the BL33 CoT (key cert + img cert)
 ifneq (${BL33},)
-    $(eval $(call CERT_ADD_CMD_OPT,${BL33},--nt-fw,true))
     $(if ${BL33_KEY},$(eval $(call CERT_ADD_CMD_OPT,${BL33_KEY},--nt-fw-key)))
-    $(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/nt_fw_content.crt,--nt-fw-cert))
-    $(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/nt_fw_key.crt,--nt-fw-key-cert))
-    $(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/nt_fw_content.crt,--nt-fw-cert))
-    $(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/nt_fw_key.crt,--nt-fw-key-cert))
-endif
-
-# Add the BL2U image
-$(if ${BL2U},$(eval $(call FWU_CERT_ADD_CMD_OPT,${BL2U},--ap-fwu-cfg,true)),\
-     $(eval $(call FWU_CERT_ADD_CMD_OPT,$(call IMG_BIN,2u),--ap-fwu-cfg,true)))
-
-# Add the SCP_BL2U image
-ifneq (${SCP_BL2U},)
-    $(eval $(call FWU_CERT_ADD_CMD_OPT,${SCP_BL2U},--scp-fwu-cfg,true))
-endif
-
-# Add the NS_BL2U image
-ifneq (${NS_BL2U},)
-    $(eval $(call FWU_CERT_ADD_CMD_OPT,${NS_BL2U},--fwu,true))
+    $(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/nt_fw_content.crt,--nt-fw-cert))
+    $(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/nt_fw_key.crt,--nt-fw-key-cert))
 endif
diff --git a/plat/arm/common/arm_common.mk b/plat/arm/common/arm_common.mk
index e6ce18a..48e7071 100644
--- a/plat/arm/common/arm_common.mk
+++ b/plat/arm/common/arm_common.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@@ -87,10 +87,10 @@
 # Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
 # in the FIP if the platform requires.
 ifneq ($(BL32_EXTRA1),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
+$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
 endif
 ifneq ($(BL32_EXTRA2),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
+$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
 endif
 
 # Enable PSCI_STAT_COUNT/RESIDENCY APIs on ARM platforms
@@ -211,7 +211,7 @@
     BL2_SOURCES		+=	${AUTH_SOURCES}					\
 				plat/common/tbbr/plat_tbbr.c
 
-    $(eval $(call FWU_FIP_ADD_IMG,NS_BL2U,--fwu))
+    $(eval $(call TOOL_ADD_IMG,ns_bl2u,--fwu,FWU_))
 
     # We expect to locate the *.mk files under the directories specified below
 ifeq (${ARM_CRYPTOCELL_INTEG},0)
diff --git a/plat/arm/css/common/css_common.mk b/plat/arm/css/common/css_common.mk
index 63e3059..cfbb3e9 100644
--- a/plat/arm/css/common/css_common.mk
+++ b/plat/arm/css/common/css_common.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@@ -49,7 +49,7 @@
 ifeq (${CSS_LOAD_SCP_IMAGES},1)
   NEED_SCP_BL2 := yes
   ifneq (${TRUSTED_BOARD_BOOT},0)
-    $(eval $(call FWU_FIP_ADD_IMG,SCP_BL2U,--scp-fwu-cfg))
+    $(eval $(call TOOL_ADD_IMG,scp_bl2u,--scp-fwu-cfg,FWU_))
   endif
 
   ifeq (${CSS_USE_SCMI_SDS_DRIVER},1)
diff --git a/plat/common/aarch32/platform_helpers.S b/plat/common/aarch32/platform_helpers.S
index 0a0e927..d618539 100644
--- a/plat/common/aarch32/platform_helpers.S
+++ b/plat/common/aarch32/platform_helpers.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -15,10 +15,7 @@
 	.weak	plat_disable_acp
 	.weak	bl1_plat_prepare_exit
 	.weak	platform_mem_init
-	.weak	plat_error_handler
 	.weak	plat_panic_handler
-	.weak	bl2_plat_preload_setup
-	.weak	plat_try_next_boot_source
 
 	/* -----------------------------------------------------
 	 * Placeholder function which should be redefined by
@@ -95,16 +92,6 @@
 endfunc bl1_plat_prepare_exit
 
 	/* -----------------------------------------------------
-	 * void plat_error_handler(int err) __dead2;
-	 * Endless loop by default.
-	 * -----------------------------------------------------
-	 */
-func plat_error_handler
-	wfi
-	b	plat_error_handler
-endfunc plat_error_handler
-
-	/* -----------------------------------------------------
 	 * void plat_panic_handler(void) __dead2;
 	 * Endless loop by default.
 	 * -----------------------------------------------------
@@ -112,23 +99,3 @@
 func plat_panic_handler
 	b	plat_panic_handler
 endfunc plat_panic_handler
-
-
-	/* -----------------------------------------------------
-	 * Placeholder function which should be redefined by
-	 * each platfrom.
-	 * -----------------------------------------------------
-	 */
-func bl2_plat_preload_setup
-	bx	lr
-endfunc bl2_plat_preload_setup
-
-	/* -----------------------------------------------------
-	 * Placeholder function which should be redefined by
-	 * each platfrom.
-	 * -----------------------------------------------------
-	 */
-func plat_try_next_boot_source
-	mov	r0, #0
-	bx	lr
-endfunc plat_try_next_boot_source
diff --git a/plat/common/aarch64/platform_helpers.S b/plat/common/aarch64/platform_helpers.S
index 8526752..033a12f 100644
--- a/plat/common/aarch64/platform_helpers.S
+++ b/plat/common/aarch64/platform_helpers.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -16,10 +16,7 @@
 	.weak	plat_reset_handler
 	.weak	plat_disable_acp
 	.weak	bl1_plat_prepare_exit
-	.weak	plat_error_handler
 	.weak	plat_panic_handler
-	.weak	bl2_plat_preload_setup
-	.weak	plat_try_next_boot_source
 
 #if !ENABLE_PLAT_COMPAT
 	.globl	platform_get_core_pos
@@ -159,16 +156,6 @@
 endfunc bl1_plat_prepare_exit
 
 	/* -----------------------------------------------------
-	 * void plat_error_handler(int err) __dead2;
-	 * Endless loop by default.
-	 * -----------------------------------------------------
-	 */
-func plat_error_handler
-	wfi
-	b	plat_error_handler
-endfunc plat_error_handler
-
-	/* -----------------------------------------------------
 	 * void plat_panic_handler(void) __dead2;
 	 * Endless loop by default.
 	 * -----------------------------------------------------
@@ -177,22 +164,3 @@
 	wfi
 	b	plat_panic_handler
 endfunc plat_panic_handler
-
-	/* -----------------------------------------------------
-	 * Placeholder function which should be redefined by
-	 * each platfrom.
-	 * -----------------------------------------------------
-	 */
-func bl2_plat_preload_setup
-	ret
-endfunc bl2_plat_preload_setup
-
-	/* -----------------------------------------------------
-	 * Placeholder function which should be redefined by
-	 * each platfrom.
-	 * -----------------------------------------------------
-	 */
-func plat_try_next_boot_source
-	mov	x0, #0
-	ret
-endfunc plat_try_next_boot_source
diff --git a/plat/common/platform_helpers_default.c b/plat/common/platform_helpers_default.c
new file mode 100644
index 0000000..ce1a731
--- /dev/null
+++ b/plat/common/platform_helpers_default.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <platform.h>
+
+/*
+ * Placeholder functions which can be redefined by each platfrom.
+ */
+
+#pragma weak plat_error_handler
+#pragma weak bl1_plat_handle_pre_image_load
+#pragma weak bl1_plat_handle_post_image_load
+#pragma weak bl2_plat_preload_setup
+#pragma weak bl2_plat_handle_pre_image_load
+#pragma weak bl2_plat_handle_post_image_load
+#pragma weak plat_try_next_boot_source
+
+void __dead2 plat_error_handler(int err)
+{
+	while (1)
+		wfi();
+}
+
+int bl1_plat_handle_pre_image_load(void)
+{
+	return 0;
+}
+
+int bl1_plat_handle_post_image_load(void)
+{
+	return 0;
+}
+
+void bl2_plat_preload_setup(void)
+{
+}
+
+int bl2_plat_handle_pre_image_load(unsigned int image_id)
+{
+	return 0;
+}
+
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	return 0;
+}
+
+int plat_try_next_boot_source(void)
+{
+	return 0;
+}
diff --git a/plat/hisilicon/hikey/platform.mk b/plat/hisilicon/hikey/platform.mk
index c8a2992..d43b20b 100644
--- a/plat/hisilicon/hikey/platform.mk
+++ b/plat/hisilicon/hikey/platform.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@@ -36,10 +36,10 @@
 # Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
 # in the FIP if the platform requires.
 ifneq ($(BL32_EXTRA1),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
+$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
 endif
 ifneq ($(BL32_EXTRA2),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
+$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
 endif
 
 ENABLE_PLAT_COMPAT	:=	0
@@ -122,4 +122,6 @@
 ERRATA_A53_843419		:=	1
 ERRATA_A53_855873		:=	1
 
+WORKAROUND_CVE_2017_5715	:=	0
+
 FIP_ALIGN			:=	512
diff --git a/plat/hisilicon/hikey960/platform.mk b/plat/hisilicon/hikey960/platform.mk
index cb97deb..cd06305 100644
--- a/plat/hisilicon/hikey960/platform.mk
+++ b/plat/hisilicon/hikey960/platform.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@@ -29,10 +29,10 @@
 # Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
 # in the FIP if the platform requires.
 ifneq ($(BL32_EXTRA1),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
+$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
 endif
 ifneq ($(BL32_EXTRA2),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
+$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
 endif
 
 ENABLE_PLAT_COMPAT	:=	0
diff --git a/plat/hisilicon/poplar/platform.mk b/plat/hisilicon/poplar/platform.mk
index 2dbbac6..d53e062 100644
--- a/plat/hisilicon/poplar/platform.mk
+++ b/plat/hisilicon/poplar/platform.mk
@@ -29,6 +29,8 @@
 ERRATA_A53_843419		:= 1
 ENABLE_SVE_FOR_NS		:= 0
 
+WORKAROUND_CVE_2017_5715	:= 0
+
 ARM_GIC_ARCH			:= 2
 $(eval $(call add_define,ARM_GIC_ARCH))
 
diff --git a/plat/mediatek/mt6795/platform.mk b/plat/mediatek/mt6795/platform.mk
index 8230067..1bdf30a 100644
--- a/plat/mediatek/mt6795/platform.mk
+++ b/plat/mediatek/mt6795/platform.mk
@@ -61,6 +61,8 @@
 ERRATA_A53_826319	:=	1
 ERRATA_A53_836870	:=	1
 
+WORKAROUND_CVE_2017_5715	:=	0
+
 # indicate the reset vector address can be programmed
 PROGRAMMABLE_RESET_ADDRESS	:=	1
 
diff --git a/plat/qemu/aarch32/plat_helpers.S b/plat/qemu/aarch32/plat_helpers.S
new file mode 100644
index 0000000..a9b1d8f
--- /dev/null
+++ b/plat/qemu/aarch32/plat_helpers.S
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <assert_macros.S>
+#include <platform_def.h>
+
+	.globl	plat_my_core_pos
+	.globl	plat_get_my_entrypoint
+	.globl	platform_mem_init
+	.globl	plat_qemu_calc_core_pos
+	.globl	plat_crash_console_init
+	.globl	plat_crash_console_putc
+	.globl  plat_secondary_cold_boot_setup
+	.globl  plat_get_my_entrypoint
+	.globl  plat_is_my_cpu_primary
+
+
+func plat_my_core_pos
+	ldcopr	r0, MPIDR
+	b	plat_qemu_calc_core_pos
+endfunc plat_my_core_pos
+
+/*
+ *  unsigned int plat_qemu_calc_core_pos(u_register_t mpidr);
+ *  With this function: CorePos = (ClusterId * 4) + CoreId
+ */
+func plat_qemu_calc_core_pos
+	and	r1, r0, #MPIDR_CPU_MASK
+	and	r0, r0, #MPIDR_CLUSTER_MASK
+	add	r0, r1, r0, LSR #6
+	bx	lr
+endfunc plat_qemu_calc_core_pos
+
+	/* -----------------------------------------------------
+	 * unsigned int plat_is_my_cpu_primary (void);
+	 *
+	 * Find out whether the current cpu is the primary
+	 * cpu.
+	 * -----------------------------------------------------
+	 */
+func plat_is_my_cpu_primary
+	ldcopr	r0, MPIDR
+	ldr	r1, =(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
+	and	r0, r1
+	cmp	r0, #QEMU_PRIMARY_CPU
+	moveq	r0, #1
+	movne	r0, #0
+	bx	lr
+endfunc plat_is_my_cpu_primary
+
+	/* -----------------------------------------------------
+	 * void plat_secondary_cold_boot_setup (void);
+	 *
+	 * This function performs any platform specific actions
+	 * needed for a secondary cpu after a cold reset e.g
+	 * mark the cpu's presence, mechanism to place it in a
+	 * holding pen etc.
+	 * -----------------------------------------------------
+	 */
+func plat_secondary_cold_boot_setup
+	/* Calculate address of our hold entry */
+	bl	plat_my_core_pos
+	lsl	r0, r0, #PLAT_QEMU_HOLD_ENTRY_SHIFT
+	mov_imm	r2, PLAT_QEMU_HOLD_BASE
+
+	/* Wait until we have a go */
+poll_mailbox:
+	ldr	r1, [r2, r0]
+        cmp     r1, #0
+        beq     1f
+	mov_imm	r0, PLAT_QEMU_TRUSTED_MAILBOX_BASE
+	ldr	r1, [r0]
+	bx	r1
+1:
+	wfe
+	b	poll_mailbox
+endfunc plat_secondary_cold_boot_setup
+
+func plat_get_my_entrypoint
+	/* TODO support warm boot */
+	mov	r0, #0
+	bx	lr
+endfunc plat_get_my_entrypoint
+
+func platform_mem_init
+	bx	lr
+endfunc platform_mem_init
+
+	/* ---------------------------------------------
+	 * int plat_crash_console_init(void)
+	 * Function to initialize the crash console
+	 * without a C Runtime to print crash report.
+	 * Clobber list : x0, x1, x2
+	 * ---------------------------------------------
+	 */
+func plat_crash_console_init
+	mov_imm	r0, PLAT_QEMU_CRASH_UART_BASE
+	mov_imm	r1, PLAT_QEMU_CRASH_UART_CLK_IN_HZ
+	mov_imm	r2, PLAT_QEMU_CONSOLE_BAUDRATE
+	b	console_core_init
+endfunc plat_crash_console_init
+
+	/* ---------------------------------------------
+	 * int plat_crash_console_putc(int c)
+	 * Function to print a character on the crash
+	 * console without a C Runtime.
+	 * Clobber list : x1, x2
+	 * ---------------------------------------------
+	 */
+func plat_crash_console_putc
+	mov_imm	r1, PLAT_QEMU_CRASH_UART_BASE
+	b	console_core_putc
+endfunc plat_crash_console_putc
+
diff --git a/plat/qemu/include/platform_def.h b/plat/qemu/include/platform_def.h
index 0ae28ea..3eafb43 100644
--- a/plat/qemu/include/platform_def.h
+++ b/plat/qemu/include/platform_def.h
@@ -16,10 +16,17 @@
 
 #define PLATFORM_STACK_SIZE 0x1000
 
+#if ARM_ARCH_MAJOR == 7
+#define PLATFORM_MAX_CPUS_PER_CLUSTER	4
+#define PLATFORM_CLUSTER_COUNT		1
+#define PLATFORM_CLUSTER0_CORE_COUNT	PLATFORM_MAX_CPUS_PER_CLUSTER
+#define PLATFORM_CLUSTER1_CORE_COUNT	0
+#else
 #define PLATFORM_MAX_CPUS_PER_CLUSTER	4
 #define PLATFORM_CLUSTER_COUNT		2
 #define PLATFORM_CLUSTER0_CORE_COUNT	PLATFORM_MAX_CPUS_PER_CLUSTER
 #define PLATFORM_CLUSTER1_CORE_COUNT	PLATFORM_MAX_CPUS_PER_CLUSTER
+#endif
 #define PLATFORM_CORE_COUNT		(PLATFORM_CLUSTER0_CORE_COUNT + \
 					 PLATFORM_CLUSTER1_CORE_COUNT)
 
diff --git a/plat/qemu/platform.mk b/plat/qemu/platform.mk
index 43ab846..334fbe4 100644
--- a/plat/qemu/platform.mk
+++ b/plat/qemu/platform.mk
@@ -1,9 +1,28 @@
 #
-# Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
 
+ifeq (${ARM_ARCH_MAJOR},7)
+# ARMv7 Qemu support in trusted firmware expects the Cortex-A15 model.
+# Qemu Cortex-A15 model does not implement the virtualization extension.
+# For this reason, we cannot set ARM_CORTEX_A15=yes and must define all
+# the ARMv7 build directives.
+MARCH32_DIRECTIVE 	:= 	-mcpu=cortex-a15
+$(eval $(call add_define,ARMV7_SUPPORTS_LARGE_PAGE_ADDRESSING))
+$(eval $(call add_define,ARMV7_SUPPORTS_GENERIC_TIMER))
+# Qemu expects a BL32 boot stage.
+NEED_BL32		:=	yes
+endif # ARMv7
+
+ifeq (${SPD},opteed)
+add-lib-optee 		:= 	yes
+endif
+ifeq ($(AARCH32_SP),optee)
+add-lib-optee 		:= 	yes
+endif
+
 include lib/libfdt/libfdt.mk
 
 # Enable new version of image loading on QEMU platforms
@@ -15,10 +34,13 @@
 
 PLAT_PATH               :=      plat/qemu/
 PLAT_INCLUDES		:=	-Iinclude/plat/arm/common/		\
-				-Iinclude/plat/arm/common/aarch64/	\
 				-Iplat/qemu/include			\
 				-Iinclude/common/tbbr
 
+ifeq (${ARM_ARCH_MAJOR},8)
+PLAT_INCLUDES		+=	-Iinclude/plat/arm/common/${ARCH}
+endif
+
 # Use translation tables library v2 by default
 ARM_XLAT_TABLES_LIB_V1		:=	0
 $(eval $(call assert_boolean,ARM_XLAT_TABLES_LIB_V1))
@@ -26,11 +48,11 @@
 
 
 PLAT_BL_COMMON_SOURCES	:=	plat/qemu/qemu_common.c			\
-				drivers/arm/pl011/aarch64/pl011_console.S
+				drivers/arm/pl011/${ARCH}/pl011_console.S
 
 ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1)
 PLAT_BL_COMMON_SOURCES	+=	lib/xlat_tables/xlat_tables_common.c		\
-				lib/xlat_tables/aarch64/xlat_tables.c
+				lib/xlat_tables/${ARCH}/xlat_tables.c
 else
 include lib/xlat_tables_v2/xlat_tables.mk
 
@@ -87,22 +109,27 @@
 				drivers/io/io_fip.c			\
 				drivers/io/io_memmap.c			\
 				lib/semihosting/semihosting.c		\
-				lib/semihosting/aarch64/semihosting_call.S \
+				lib/semihosting/${ARCH}/semihosting_call.S \
 				plat/qemu/qemu_io_storage.c		\
-				lib/cpus/aarch64/aem_generic.S		\
-				lib/cpus/aarch64/cortex_a53.S		\
-				lib/cpus/aarch64/cortex_a57.S		\
-				plat/qemu/aarch64/plat_helpers.S	\
+				plat/qemu/${ARCH}/plat_helpers.S	\
 				plat/qemu/qemu_bl1_setup.c
 
+ifeq (${ARM_ARCH_MAJOR},8)
+BL1_SOURCES		+=	lib/cpus/aarch64/aem_generic.S		\
+				lib/cpus/aarch64/cortex_a53.S		\
+				lib/cpus/aarch64/cortex_a57.S
+else
+BL1_SOURCES		+=	lib/cpus/${ARCH}/cortex_a15.S
+endif
+
 BL2_SOURCES		+=	drivers/io/io_semihosting.c		\
 				drivers/io/io_storage.c			\
 				drivers/io/io_fip.c			\
 				drivers/io/io_memmap.c			\
 				lib/semihosting/semihosting.c		\
-				lib/semihosting/aarch64/semihosting_call.S\
+				lib/semihosting/${ARCH}/semihosting_call.S\
 				plat/qemu/qemu_io_storage.c		\
-				plat/qemu/aarch64/plat_helpers.S	\
+				plat/qemu/${ARCH}/plat_helpers.S	\
 				plat/qemu/qemu_bl2_setup.c		\
 				plat/qemu/dt.c				\
 				$(LIBFDT_SRCS)
@@ -111,11 +138,12 @@
 				plat/qemu/qemu_image_load.c		\
 				common/desc_image_load.c
 endif
-ifeq (${SPD},opteed)
+ifeq ($(add-lib-optee),yes)
 BL2_SOURCES		+=	lib/optee/optee_utils.c
 endif
 
 
+ifeq (${ARM_ARCH_MAJOR},8)
 BL31_SOURCES		+=	lib/cpus/aarch64/aem_generic.S		\
 				lib/cpus/aarch64/cortex_a53.S		\
 				lib/cpus/aarch64/cortex_a57.S		\
@@ -128,15 +156,15 @@
 				plat/qemu/aarch64/plat_helpers.S	\
 				plat/qemu/qemu_bl31_setup.c		\
 				plat/qemu/qemu_gic.c
-
+endif
 
 # Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
 # in the FIP if the platform requires.
 ifneq ($(BL32_EXTRA1),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
+$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
 endif
 ifneq ($(BL32_EXTRA2),)
-$(eval $(call FIP_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
+$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
 endif
 
 # Disable the PSCI platform compatibility layer
diff --git a/plat/qemu/qemu_bl1_setup.c b/plat/qemu/qemu_bl1_setup.c
index 5a70558..7c820fd 100644
--- a/plat/qemu/qemu_bl1_setup.c
+++ b/plat/qemu/qemu_bl1_setup.c
@@ -57,9 +57,15 @@
  * does basic initialization. Later architectural setup (bl1_arch_setup())
  * does not do anything platform specific.
  *****************************************************************************/
+#ifdef AARCH32
+#define QEMU_CONFIGURE_BL1_MMU(...)	qemu_configure_mmu_secure(__VA_ARGS__)
+#else
+#define QEMU_CONFIGURE_BL1_MMU(...)	qemu_configure_mmu_el3(__VA_ARGS__)
+#endif
+
 void bl1_plat_arch_setup(void)
 {
-	qemu_configure_mmu_el3(bl1_tzram_layout.total_base,
+	QEMU_CONFIGURE_BL1_MMU(bl1_tzram_layout.total_base,
 				bl1_tzram_layout.total_size,
 				BL1_RO_BASE, BL1_RO_LIMIT,
 				BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END);
diff --git a/plat/qemu/qemu_bl2_mem_params_desc.c b/plat/qemu/qemu_bl2_mem_params_desc.c
index 47f88ac..9965cfd 100644
--- a/plat/qemu/qemu_bl2_mem_params_desc.c
+++ b/plat/qemu/qemu_bl2_mem_params_desc.c
@@ -34,6 +34,7 @@
 	  .next_handoff_image_id = INVALID_IMAGE_ID,
 	},
 #else /* EL3_PAYLOAD_BASE */
+#ifdef AARCH64
 	/* Fill BL31 related information */
 	{ .image_id = BL31_IMAGE_ID,
 
@@ -57,16 +58,27 @@
 	  .next_handoff_image_id = BL33_IMAGE_ID,
 # endif
 	},
+#endif /* AARCH64 */
 # ifdef QEMU_LOAD_BL32
+
+#ifdef AARCH64
+#define BL32_EP_ATTRIBS		(SECURE | EXECUTABLE)
+#define BL32_IMG_ATTRIBS	0
+#else
+#define BL32_EP_ATTRIBS		(SECURE | EXECUTABLE | EP_FIRST_EXE)
+#define BL32_IMG_ATTRIBS	IMAGE_ATTRIB_PLAT_SETUP
+#endif
+
 	/* Fill BL32 related information */
 	{ .image_id = BL32_IMAGE_ID,
 
 	  SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP, VERSION_2,
-				entry_point_info_t, SECURE | EXECUTABLE),
+				entry_point_info_t, BL32_EP_ATTRIBS),
 	  .ep_info.pc = BL32_BASE,
 
-	  SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2, image_info_t,
-				0),
+	  SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2,
+				image_info_t, BL32_IMG_ATTRIBS),
+
 	  .image_info.image_base = BL32_BASE,
 	  .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
 
@@ -103,7 +115,7 @@
 
 	   SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2,
 				 image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
-#ifdef SPD_opteed
+#if defined(SPD_opteed) || defined(AARCH32_SP_OPTEE)
 	   .image_info.image_base = QEMU_OPTEE_PAGEABLE_LOAD_BASE,
 	   .image_info.image_max_size = QEMU_OPTEE_PAGEABLE_LOAD_SIZE,
 #endif
diff --git a/plat/qemu/qemu_bl2_setup.c b/plat/qemu/qemu_bl2_setup.c
index 60d9623..9e4a4a0 100644
--- a/plat/qemu/qemu_bl2_setup.c
+++ b/plat/qemu/qemu_bl2_setup.c
@@ -9,10 +9,9 @@
 #include <console.h>
 #include <debug.h>
 #include <desc_image_load.h>
-#ifdef SPD_opteed
 #include <optee_utils.h>
-#endif
 #include <libfdt.h>
+#include <platform.h>
 #include <platform_def.h>
 #include <string.h>
 #include <utils.h>
@@ -183,9 +182,15 @@
 	/* TODO Initialize timer */
 }
 
+#ifdef AARCH32
+#define QEMU_CONFIGURE_BL2_MMU(...)	qemu_configure_mmu_secure(__VA_ARGS__)
+#else
+#define QEMU_CONFIGURE_BL2_MMU(...)	qemu_configure_mmu_el1(__VA_ARGS__)
+#endif
+
 void bl2_plat_arch_setup(void)
 {
-	qemu_configure_mmu_el1(bl2_tzram_layout.total_base,
+	QEMU_CONFIGURE_BL2_MMU(bl2_tzram_layout.total_base,
 			      bl2_tzram_layout.total_size,
 			      BL2_RO_BASE, BL2_RO_LIMIT,
 			      BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END);
@@ -196,11 +201,16 @@
  ******************************************************************************/
 static uint32_t qemu_get_spsr_for_bl32_entry(void)
 {
+#ifdef AARCH64
 	/*
 	 * The Secure Payload Dispatcher service is responsible for
 	 * setting the SPSR prior to entry into the BL3-2 image.
 	 */
 	return 0;
+#else
+	return SPSR_MODE32(MODE32_svc, SPSR_T_ARM, SPSR_E_LITTLE,
+			   DISABLE_ALL_EXCEPTIONS);
+#endif
 }
 
 /*******************************************************************************
@@ -208,8 +218,9 @@
  ******************************************************************************/
 static uint32_t qemu_get_spsr_for_bl33_entry(void)
 {
-	unsigned int mode;
 	uint32_t spsr;
+#ifdef AARCH64
+	unsigned int mode;
 
 	/* Figure out what mode we enter the non-secure world in */
 	mode = EL_IMPLEMENTED(2) ? MODE_EL2 : MODE_EL1;
@@ -220,6 +231,11 @@
 	 * well.
 	 */
 	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+#else
+	spsr = SPSR_MODE32(MODE32_svc,
+		    plat_get_ns_image_entrypoint() & 0x1,
+		    SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
+#endif
 	return spsr;
 }
 
@@ -228,7 +244,7 @@
 {
 	int err = 0;
 	bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
-#ifdef SPD_opteed
+#if defined(SPD_opteed) || defined(AARCH32_SP_OPTEE)
 	bl_mem_params_node_t *pager_mem_params = NULL;
 	bl_mem_params_node_t *paged_mem_params = NULL;
 #endif
@@ -236,9 +252,8 @@
 	assert(bl_mem_params);
 
 	switch (image_id) {
-# ifdef AARCH64
 	case BL32_IMAGE_ID:
-#ifdef SPD_opteed
+#if defined(SPD_opteed) || defined(AARCH32_SP_OPTEE)
 		pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
 		assert(pager_mem_params);
 
@@ -252,16 +267,31 @@
 			WARN("OPTEE header parse error.\n");
 		}
 
+#if defined(SPD_opteed)
 		/*
 		 * OP-TEE expect to receive DTB address in x2.
 		 * This will be copied into x2 by dispatcher.
 		 */
 		bl_mem_params->ep_info.args.arg3 = PLAT_QEMU_DT_BASE;
+#else /* case AARCH32_SP_OPTEE */
+		bl_mem_params->ep_info.args.arg0 =
+					bl_mem_params->ep_info.args.arg1;
+		bl_mem_params->ep_info.args.arg1 = 0;
+		bl_mem_params->ep_info.args.arg2 = PLAT_QEMU_DT_BASE;
+		bl_mem_params->ep_info.args.arg3 = 0;
+#endif
 #endif
 		bl_mem_params->ep_info.spsr = qemu_get_spsr_for_bl32_entry();
 		break;
-# endif
+
 	case BL33_IMAGE_ID:
+#ifdef AARCH32_SP_OPTEE
+		/* AArch32 only core: OP-TEE expects NSec EP in register LR */
+		pager_mem_params = get_bl_mem_params_node(BL32_IMAGE_ID);
+		assert(pager_mem_params);
+		pager_mem_params->ep_info.lr_svc = bl_mem_params->ep_info.pc;
+#endif
+
 		/* BL33 expects to receive the primary CPU MPID (through r0) */
 		bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
 		bl_mem_params->ep_info.spsr = qemu_get_spsr_for_bl33_entry();
@@ -349,7 +379,7 @@
 }
 #endif /* !LOAD_IMAGE_V2 */
 
-unsigned long plat_get_ns_image_entrypoint(void)
+uintptr_t plat_get_ns_image_entrypoint(void)
 {
 	return NS_IMAGE_OFFSET;
 }
diff --git a/plat/qemu/qemu_common.c b/plat/qemu/qemu_common.c
index e34b16f..6f9fcc6 100644
--- a/plat/qemu/qemu_common.c
+++ b/plat/qemu/qemu_common.c
@@ -85,6 +85,16 @@
 	{0}
 };
 #endif
+#ifdef IMAGE_BL32
+static const mmap_region_t plat_qemu_mmap[] = {
+	MAP_SHARED_RAM,
+	MAP_DEVICE0,
+#ifdef MAP_DEVICE1
+	MAP_DEVICE1,
+#endif
+	{0}
+};
+#endif
 
 /*******************************************************************************
  * Macro generating the code for the function setting up the pagetables as per
@@ -92,7 +102,7 @@
  ******************************************************************************/
 
 #define DEFINE_CONFIGURE_MMU_EL(_el)					\
-	void qemu_configure_mmu_el##_el(unsigned long total_base,	\
+	void qemu_configure_mmu_##_el(unsigned long total_base,	\
 				   unsigned long total_size,		\
 				   unsigned long ro_start,		\
 				   unsigned long ro_limit,		\
@@ -111,11 +121,15 @@
 		mmap_add(plat_qemu_mmap);				\
 		init_xlat_tables();					\
 									\
-		enable_mmu_el##_el(0);					\
+		enable_mmu_##_el(0);					\
 	}
 
 /* Define EL1 and EL3 variants of the function initialising the MMU */
-DEFINE_CONFIGURE_MMU_EL(1)
-DEFINE_CONFIGURE_MMU_EL(3)
+#ifdef AARCH32
+DEFINE_CONFIGURE_MMU_EL(secure)
+#else
+DEFINE_CONFIGURE_MMU_EL(el1)
+DEFINE_CONFIGURE_MMU_EL(el3)
+#endif
 
 
diff --git a/plat/qemu/qemu_private.h b/plat/qemu/qemu_private.h
index 1671ec7..202d604 100644
--- a/plat/qemu/qemu_private.h
+++ b/plat/qemu/qemu_private.h
@@ -9,6 +9,11 @@
 
 #include <sys/types.h>
 
+void qemu_configure_mmu_secure(unsigned long total_base,
+			unsigned long total_size,
+			unsigned long ro_start, unsigned long ro_limit,
+			unsigned long coh_start, unsigned long coh_limit);
+
 void qemu_configure_mmu_el1(unsigned long total_base, unsigned long total_size,
 			unsigned long ro_start, unsigned long ro_limit,
 			unsigned long coh_start, unsigned long coh_limit);
diff --git a/plat/qemu/sp_min/sp_min-qemu.mk b/plat/qemu/sp_min/sp_min-qemu.mk
new file mode 100644
index 0000000..5e8875b
--- /dev/null
+++ b/plat/qemu/sp_min/sp_min-qemu.mk
@@ -0,0 +1,22 @@
+#
+# Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+BL32_SOURCES		+=	plat/qemu/sp_min/sp_min_setup.c		\
+				plat/qemu/aarch32/plat_helpers.S	\
+				plat/qemu/qemu_gic.c 			\
+				plat/qemu/qemu_pm.c			\
+				plat/qemu/topology.c
+
+BL32_SOURCES		+=	lib/cpus/aarch32/aem_generic.S		\
+				lib/cpus/aarch32/cortex_a15.S
+
+BL32_SOURCES		+=	plat/common/aarch32/platform_mp_stack.S \
+				plat/common/plat_psci_common.c
+
+
+BL32_SOURCES		+=	drivers/arm/gic/v2/gicv2_helpers.c	\
+				drivers/arm/gic/v2/gicv2_main.c		\
+				drivers/arm/gic/common/gic_common.c
diff --git a/plat/qemu/sp_min/sp_min_setup.c b/plat/qemu/sp_min/sp_min_setup.c
new file mode 100644
index 0000000..fd8fa1c
--- /dev/null
+++ b/plat/qemu/sp_min/sp_min_setup.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <arm_gic.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <console.h>
+#include <debug.h>
+#include <gic_common.h>
+#include <gicv2.h>
+#include <mmio.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <string.h>
+#include <xlat_tables.h>
+#include "../qemu_private.h"
+
+#if RESET_TO_SP_MIN
+#error qemu does not support RESET_TO_SP_MIN
+#endif
+
+static entry_point_info_t bl33_image_ep_info;
+
+/*
+ * The next 3 constants identify the extents of the code, RO data region and the
+ * limit of the BL3-1 image.  These addresses are used by the MMU setup code and
+ * therefore they must be page-aligned.  It is the responsibility of the linker
+ * script to ensure that __RO_START__, __RO_END__ & __BL31_END__ linker symbols
+ * refer to page-aligned addresses.
+ */
+#define BL32_RO_BASE (unsigned long)(&__RO_START__)
+#define BL32_RO_LIMIT (unsigned long)(&__RO_END__)
+#define BL32_END (unsigned long)(&__BL32_END__)
+
+#if USE_COHERENT_MEM
+/*
+ * The next 2 constants identify the extents of the coherent memory region.
+ * These addresses are used by the MMU setup code and therefore they must be
+ * page-aligned.  It is the responsibility of the linker script to ensure that
+ * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols
+ * refer to page-aligned addresses.
+ */
+#define BL32_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
+#define BL32_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
+#endif
+
+/******************************************************************************
+ * On a GICv2 system, the Group 1 secure interrupts are treated as Group 0
+ * interrupts.
+ *****************************************************************************/
+#define PLATFORM_G1S_PROPS(grp)						\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL),	\
+	INTR_PROP_DESC(QEMU_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY,	\
+					   grp, GIC_INTR_CFG_LEVEL)
+
+#define PLATFORM_G0_PROPS(grp)
+
+static const interrupt_prop_t stih410_interrupt_props[] = {
+	PLATFORM_G1S_PROPS(GICV2_INTR_GROUP0),
+	PLATFORM_G0_PROPS(GICV2_INTR_GROUP0)
+};
+
+static unsigned int target_mask_array[PLATFORM_CORE_COUNT];
+
+static const struct gicv2_driver_data plat_gicv2_driver_data = {
+	.gicd_base = GICD_BASE,
+	.gicc_base = GICC_BASE,
+	.interrupt_props = stih410_interrupt_props,
+	.interrupt_props_num = ARRAY_SIZE(stih410_interrupt_props),
+	.target_masks = target_mask_array,
+	.target_masks_num = ARRAY_SIZE(target_mask_array),
+};
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for
+ * the security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *sp_min_plat_get_bl33_ep_info(void)
+{
+	entry_point_info_t *next_image_info = &bl33_image_ep_info;
+
+	/*
+	 * None of the images on the ARM development platforms can have 0x0
+	 * as the entrypoint
+	 */
+	if (next_image_info->pc)
+		return next_image_info;
+	else
+		return NULL;
+}
+
+void sp_min_early_platform_setup(void *from_bl2, void *plat_params_from_bl2)
+{
+	bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
+
+	/* Initialize the console to provide early debug support */
+	console_init(PLAT_QEMU_BOOT_UART_BASE, PLAT_QEMU_BOOT_UART_CLK_IN_HZ,
+			PLAT_QEMU_CONSOLE_BAUDRATE);
+
+	ERROR("qemu sp_min, console init\n");
+	/*
+	 * Check params passed from BL2
+	 */
+	assert(params_from_bl2);
+	assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
+	assert(params_from_bl2->h.version >= VERSION_2);
+
+	bl_params_node_t *bl_params = params_from_bl2->head;
+
+	/*
+	 * Copy BL33 entry point information from BL2's address space.
+	 */
+	while (bl_params) {
+		if (bl_params->image_id == BL33_IMAGE_ID)
+			bl33_image_ep_info = *bl_params->ep_info;
+
+		bl_params = bl_params->next_params_info;
+	}
+
+	if (!bl33_image_ep_info.pc)
+		panic();
+}
+
+void sp_min_plat_arch_setup(void)
+{
+	qemu_configure_mmu_secure(BL32_RO_BASE, BL32_END - BL32_RO_BASE,
+				  BL32_RO_BASE, BL32_RO_LIMIT,
+				  BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END);
+
+}
+
+void sp_min_platform_setup(void)
+{
+	/* Initialize the gic cpu and distributor interfaces */
+	gicv2_driver_init(&plat_gicv2_driver_data);
+	gicv2_distif_init();
+	gicv2_pcpu_distif_init();
+	gicv2_cpuif_enable();
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	return SYS_COUNTER_FREQ_IN_TICKS;
+}
+
+void sp_min_plat_fiq_handler(uint32_t id)
+{
+	VERBOSE("[sp_min] interrupt #%d\n", id);
+}
diff --git a/plat/rockchip/common/plat_pm.c b/plat/rockchip/common/plat_pm.c
index cd88f60..352dbc8 100644
--- a/plat/rockchip/common/plat_pm.c
+++ b/plat/rockchip/common/plat_pm.c
@@ -246,14 +246,14 @@
 	if (RK_CORE_PWR_STATE(target_state) != PLAT_MAX_OFF_STATE)
 		return;
 
+	/* Prevent interrupts from spuriously waking up this cpu */
+	plat_rockchip_gic_cpuif_disable();
+
 	if (RK_SYSTEM_PWR_STATE(target_state) == PLAT_MAX_OFF_STATE)
 		rockchip_soc_sys_pwr_dm_suspend();
 	else
 		rockchip_soc_cores_pwr_dm_suspend();
 
-	/* Prevent interrupts from spuriously waking up this cpu */
-	plat_rockchip_gic_cpuif_disable();
-
 	/* Perform the common cluster specific operations */
 	if (RK_CLUSTER_PWR_STATE(target_state) == PLAT_MAX_OFF_STATE)
 		plat_cci_disable();
diff --git a/plat/rockchip/rk3328/platform.mk b/plat/rockchip/rk3328/platform.mk
index 6e4d5b4..f0fd36f 100644
--- a/plat/rockchip/rk3328/platform.mk
+++ b/plat/rockchip/rk3328/platform.mk
@@ -58,3 +58,5 @@
 
 # Do not enable SVE
 ENABLE_SVE_FOR_NS	:=	0
+
+WORKAROUND_CVE_2017_5715	:=	0
diff --git a/plat/rockchip/rk3368/platform.mk b/plat/rockchip/rk3368/platform.mk
index ad204e9..7ecb21a 100644
--- a/plat/rockchip/rk3368/platform.mk
+++ b/plat/rockchip/rk3368/platform.mk
@@ -57,3 +57,5 @@
 
 # Do not enable SVE
 ENABLE_SVE_FOR_NS	:=	0
+
+WORKAROUND_CVE_2017_5715	:=	0
diff --git a/plat/rockchip/rk3399/drivers/pmu/pmu.c b/plat/rockchip/rk3399/drivers/pmu/pmu.c
index c666c3c..f4893ef 100644
--- a/plat/rockchip/rk3399/drivers/pmu/pmu.c
+++ b/plat/rockchip/rk3399/drivers/pmu/pmu.c
@@ -12,6 +12,7 @@
 #include <delay_timer.h>
 #include <dfs.h>
 #include <errno.h>
+#include <gicv3.h>
 #include <gpio.h>
 #include <m0_ctl.h>
 #include <mmio.h>
@@ -32,7 +33,7 @@
 
 static uint32_t cpu_warm_boot_addr;
 static char store_sram[SRAM_BIN_LIMIT + SRAM_TEXT_LIMIT + SRAM_DATA_LIMIT];
-static uint32_t store_cru[CRU_SDIO0_CON1 / 4];
+static uint32_t store_cru[CRU_SDIO0_CON1 / 4 + 1];
 static uint32_t store_usbphy0[7];
 static uint32_t store_usbphy1[7];
 static uint32_t store_grf_io_vsel;
@@ -45,6 +46,8 @@
 static uint32_t store_grf_ddrc_con[4];
 static uint32_t store_wdt0[2];
 static uint32_t store_wdt1[2];
+static gicv3_dist_ctx_t dist_ctx;
+static gicv3_redist_ctx_t rdist_ctx;
 
 /*
  * There are two ways to powering on or off on core.
@@ -79,9 +82,12 @@
 	do {
 		bus_state = mmio_read_32(PMU_BASE + PMU_BUS_IDLE_ST) & bus_id;
 		bus_ack = mmio_read_32(PMU_BASE + PMU_BUS_IDLE_ACK) & bus_id;
+		if (bus_state == bus_req && bus_ack == bus_req)
+			break;
+
 		wait_cnt++;
-	} while ((bus_state != bus_req || bus_ack != bus_req) &&
-		 (wait_cnt < MAX_WAIT_COUNT));
+		udelay(1);
+	} while (wait_cnt < MAX_WAIT_COUNT);
 
 	if (bus_state != bus_req || bus_ack != bus_req) {
 		INFO("%s:st=%x(%x)\n", __func__,
@@ -95,7 +101,7 @@
 
 struct pmu_slpdata_s pmu_slpdata;
 
-static void qos_save(void)
+static void qos_restore(void)
 {
 	if (pmu_power_domain_st(PD_GPU) == pmu_pd_on)
 		RESTORE_QOS(pmu_slpdata.gpu_qos, GPU);
@@ -161,7 +167,7 @@
 	}
 }
 
-static void qos_restore(void)
+static void qos_save(void)
 {
 	if (pmu_power_domain_st(PD_GPU) == pmu_pd_on)
 		SAVE_QOS(pmu_slpdata.gpu_qos, GPU);
@@ -430,6 +436,7 @@
 	while (!(mmio_read_32(PMU_BASE + PMU_CORE_PWR_ST) &
 		 BIT(STANDBY_BY_WFIL2_CLUSTER_B))) {
 		wait_cnt++;
+		udelay(1);
 		if (wait_cnt >= MAX_WAIT_COUNT)
 			ERROR("%s:wait cluster-b l2(%x)\n", __func__,
 			      mmio_read_32(PMU_BASE + PMU_CORE_PWR_ST));
@@ -1327,6 +1334,9 @@
 	dmc_suspend();
 	pmu_scu_b_pwrdn();
 
+	gicv3_rdistif_save(plat_my_core_pos(), &rdist_ctx);
+	gicv3_distif_save(&dist_ctx);
+
 	/* need to save usbphy before shutdown PERIHP PD */
 	save_usbphy();
 
@@ -1369,6 +1379,7 @@
 			      mmio_read_32(PMU_BASE + PMU_ADB400_ST));
 			panic();
 		}
+		udelay(1);
 	}
 	mmio_setbits_32(PMU_BASE + PMU_PWRDN_CON, BIT(PMU_SCU_B_PWRDWN_EN));
 
@@ -1462,6 +1473,7 @@
 			      mmio_read_32(PMU_BASE + PMU_ADB400_ST));
 			panic();
 		}
+		udelay(1);
 	}
 
 	pmu_sgrf_rst_hld_release();
@@ -1481,6 +1493,8 @@
 				BIT(PMU_CLR_PERILPM0) |
 				BIT(PMU_CLR_GIC));
 
+	gicv3_distif_init_restore(&dist_ctx);
+	gicv3_rdistif_init_restore(plat_my_core_pos(), &rdist_ctx);
 	plat_rockchip_gic_cpuif_enable();
 	m0_stop();
 
diff --git a/plat/rockchip/rk3399/drivers/pmu/pmu.h b/plat/rockchip/rk3399/drivers/pmu/pmu.h
index 5c0ab4d..0265dde 100644
--- a/plat/rockchip/rk3399/drivers/pmu/pmu.h
+++ b/plat/rockchip/rk3399/drivers/pmu/pmu.h
@@ -53,7 +53,7 @@
 #define TSADC_INT_PIN		38
 #define CORES_PM_DISABLE	0x0
 
-#define PD_CTR_LOOP		500
+#define PD_CTR_LOOP		10000
 #define CHK_CPU_LOOP		500
 #define MAX_WAIT_COUNT		1000
 
diff --git a/plat/rockchip/rk3399/platform.mk b/plat/rockchip/rk3399/platform.mk
index 9e369e4..1997dfc 100644
--- a/plat/rockchip/rk3399/platform.mk
+++ b/plat/rockchip/rk3399/platform.mk
@@ -23,6 +23,8 @@
 				-I${RK_PLAT_SOC}/include/shared/	\
 
 RK_GIC_SOURCES		:=	drivers/arm/gic/common/gic_common.c	\
+				drivers/arm/gic/v3/arm_gicv3_common.c	\
+				drivers/arm/gic/v3/gic500.c		\
 				drivers/arm/gic/v3/gicv3_main.c		\
 				drivers/arm/gic/v3/gicv3_helpers.c	\
 				plat/common/plat_gicv3.c		\
diff --git a/plat/rpi3/platform.mk b/plat/rpi3/platform.mk
index 821f801..e201cee 100644
--- a/plat/rpi3/platform.mk
+++ b/plat/rpi3/platform.mk
@@ -64,6 +64,8 @@
 ERRATA_A53_843419		:= 1
 ERRATA_A53_855873		:= 1
 
+WORKAROUND_CVE_2017_5715	:= 0
+
 # Disable the PSCI platform compatibility layer by default
 ENABLE_PLAT_COMPAT		:= 0
 
diff --git a/plat/socionext/uniphier/include/platform_def.h b/plat/socionext/uniphier/include/platform_def.h
index 546670e..301aa14 100644
--- a/plat/socionext/uniphier/include/platform_def.h
+++ b/plat/socionext/uniphier/include/platform_def.h
@@ -9,6 +9,7 @@
 
 #include <common_def.h>
 #include <tbbr/tbbr_img_def.h>
+#include <utils_def.h>
 
 #define PLATFORM_STACK_SIZE		0x1000
 
@@ -27,26 +28,28 @@
 #define PLAT_MAX_OFF_STATE		2
 #define PLAT_MAX_RET_STATE		1
 
-#define UNIPHIER_SEC_DRAM_BASE		0x80000000
-#define UNIPHIER_SEC_DRAM_LIMIT		0x82000000
+#define BL2_BASE			ULL(0x80000000)
+#define BL2_LIMIT			ULL(0x80080000)
+
+/* 0x80080000-0x81000000: reserved for DSP */
+
+#define UNIPHIER_SEC_DRAM_BASE		0x81000000ULL
+#define UNIPHIER_SEC_DRAM_LIMIT		0x82000000ULL
 #define UNIPHIER_SEC_DRAM_SIZE		((UNIPHIER_SEC_DRAM_LIMIT) - \
 					 (UNIPHIER_SEC_DRAM_BASE))
 
-#define BL2_BASE			(UNIPHIER_SEC_DRAM_BASE)
-#define BL2_LIMIT			((BL2_BASE) + 0x00020000)
+#define BL31_BASE			ULL(0x81000000)
+#define BL31_LIMIT			ULL(0x81080000)
 
-#define BL31_BASE			(BL2_LIMIT)
-#define BL31_LIMIT			((BL31_BASE) + 0x00080000)
-
-#define BL32_BASE			(BL31_LIMIT)
-#define BL32_LIMIT			(UNIPHIER_SEC_DRAM_LIMIT)
+#define BL32_BASE			ULL(0x81080000)
+#define BL32_LIMIT			ULL(0x81180000)
 
 #define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 32)
 #define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 32)
 
 #define PLAT_XLAT_TABLES_DYNAMIC	1
 #define MAX_XLAT_TABLES			7
-#define MAX_MMAP_REGIONS		6
+#define MAX_MMAP_REGIONS		7
 
 #define MAX_IO_HANDLES			2
 #define MAX_IO_DEVICES			2
diff --git a/plat/socionext/uniphier/platform.mk b/plat/socionext/uniphier/platform.mk
index 18b56a0..6de5164 100644
--- a/plat/socionext/uniphier/platform.mk
+++ b/plat/socionext/uniphier/platform.mk
@@ -103,6 +103,23 @@
 
 endif
 
+ifeq (${FIP_GZIP},1)
+
+include lib/zlib/zlib.mk
+
+BL2_SOURCES		+=	common/image_decompress.c		\
+				$(ZLIB_SOURCES)
+
+$(eval $(call add_define,UNIPHIER_DECOMPRESS_GZIP))
+
+# compress all images loaded by BL2
+SCP_BL2_PRE_TOOL_FILTER	:= GZIP
+BL31_PRE_TOOL_FILTER	:= GZIP
+BL32_PRE_TOOL_FILTER	:= GZIP
+BL33_PRE_TOOL_FILTER	:= GZIP
+
+endif
+
 .PHONY: bl2_gzip
 bl2_gzip: $(BUILD_PLAT)/bl2.bin.gz
 %.gz: %
diff --git a/plat/socionext/uniphier/uniphier.h b/plat/socionext/uniphier/uniphier.h
index 2af30df..1768e3b 100644
--- a/plat/socionext/uniphier/uniphier.h
+++ b/plat/socionext/uniphier/uniphier.h
@@ -42,7 +42,9 @@
 
 int uniphier_io_setup(unsigned int soc);
 int uniphier_check_image(unsigned int image_id);
-void uniphier_image_descs_fixup(void);
+
+struct image_info;
+struct image_info *uniphier_get_image_info(unsigned int image_id);
 
 int uniphier_scp_is_running(void);
 void uniphier_scp_start(void);
@@ -80,7 +82,11 @@
 
 #define UNIPHIER_BLOCK_BUF_BASE		((UNIPHIER_SCP_BASE) + \
 					 (UNIPHIER_SCP_MAX_SIZE))
-#define UNIPHIER_BLOCK_BUF_SIZE		((UNIPHIER_NS_DRAM_LIMIT) - \
-					 (UNIPHIER_BLOCK_BUF_BASE))
+#define UNIPHIER_BLOCK_BUF_SIZE		0x00100000
+
+#define UNIPHIER_IMAGE_BUF_BASE		((UNIPHIER_BLOCK_BUF_BASE) + \
+					 (UNIPHIER_BLOCK_BUF_SIZE))
+#define UNIPHIER_IMAGE_BUF_SIZE		((UNIPHIER_NS_DRAM_LIMIT) - \
+					 (UNIPHIER_IMAGE_BUF_BASE))
 
 #endif /* __UNIPHIER_H__ */
diff --git a/plat/socionext/uniphier/uniphier_bl2_setup.c b/plat/socionext/uniphier/uniphier_bl2_setup.c
index daf0c45..54b30e5 100644
--- a/plat/socionext/uniphier/uniphier_bl2_setup.c
+++ b/plat/socionext/uniphier/uniphier_bl2_setup.c
@@ -9,12 +9,19 @@
 #include <desc_image_load.h>
 #include <errno.h>
 #include <io/io_storage.h>
+#include <image_decompress.h>
 #include <platform.h>
 #include <platform_def.h>
+#ifdef UNIPHIER_DECOMPRESS_GZIP
+#include <tf_gunzip.h>
+#endif
 #include <xlat_tables_v2.h>
 
 #include "uniphier.h"
 
+#define BL2_END			(unsigned long)(&__BL2_END__)
+#define BL2_SIZE		((BL2_END) - (BL2_BASE))
+
 static int uniphier_bl2_kick_scp;
 
 void bl2_el3_early_platform_setup(u_register_t x0, u_register_t x1,
@@ -24,6 +31,9 @@
 }
 
 static const struct mmap_region uniphier_bl2_mmap[] = {
+	/* for BL31, BL32 */
+	MAP_REGION_FLAT(UNIPHIER_SEC_DRAM_BASE, UNIPHIER_SEC_DRAM_SIZE,
+			MT_MEMORY | MT_RW | MT_SECURE),
 	/* for SCP, BL33 */
 	MAP_REGION_FLAT(UNIPHIER_NS_DRAM_BASE, UNIPHIER_NS_DRAM_SIZE,
 			MT_MEMORY | MT_RW | MT_NS),
@@ -36,8 +46,7 @@
 	int skip_scp = 0;
 	int ret;
 
-	uniphier_mmap_setup(UNIPHIER_SEC_DRAM_BASE, UNIPHIER_SEC_DRAM_SIZE,
-			    uniphier_bl2_mmap);
+	uniphier_mmap_setup(BL2_BASE, BL2_SIZE, uniphier_bl2_mmap);
 	enable_mmu_el3(0);
 
 	soc = uniphier_get_soc_id();
@@ -88,8 +97,12 @@
 		}
 	}
 
+	if (skip_scp) {
+		struct image_info *image_info;
+
-	if (skip_scp)
-		uniphier_image_descs_fixup();
+		image_info = uniphier_get_image_info(SCP_BL2_IMAGE_ID);
+		image_info->h.attr |= IMAGE_ATTRIB_SKIP_LOADING;
+	}
 }
 
 void bl2_platform_setup(void)
@@ -111,8 +124,38 @@
 	return get_next_bl_params_from_mem_params_desc();
 }
 
+void bl2_plat_preload_setup(void)
+{
+#ifdef UNIPHIER_DECOMPRESS_GZIP
+	image_decompress_init(UNIPHIER_IMAGE_BUF_BASE,
+			      UNIPHIER_IMAGE_BUF_SIZE,
+			      gunzip);
+#endif
+}
+
+int bl2_plat_handle_pre_image_load(unsigned int image_id)
+{
+#ifdef UNIPHIER_DECOMPRESS_GZIP
+	image_decompress_prepare(uniphier_get_image_info(image_id));
+#endif
+	return 0;
+}
+
 int bl2_plat_handle_post_image_load(unsigned int image_id)
 {
+#ifdef UNIPHIER_DECOMPRESS_GZIP
+	struct image_info *image_info;
+	int ret;
+
+	image_info = uniphier_get_image_info(image_id);
+
+	if (!(image_info->h.attr & IMAGE_ATTRIB_SKIP_LOADING)) {
+		ret = image_decompress(uniphier_get_image_info(image_id));
+		if (ret)
+			return ret;
+	}
+#endif
+
 	if (image_id == SCP_BL2_IMAGE_ID && uniphier_bl2_kick_scp)
 		uniphier_scp_start();
 
diff --git a/plat/socionext/uniphier/uniphier_image_desc.c b/plat/socionext/uniphier/uniphier_image_desc.c
index 1e474c5..f4651db 100644
--- a/plat/socionext/uniphier/uniphier_image_desc.c
+++ b/plat/socionext/uniphier/uniphier_image_desc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -86,12 +86,11 @@
 };
 REGISTER_BL_IMAGE_DESCS(uniphier_image_descs)
 
-/* SCP is optional.  Allow run-time fixup of the descriptor array. */
-void uniphier_image_descs_fixup(void)
+struct image_info *uniphier_get_image_info(unsigned int image_id)
 {
 	struct bl_mem_params_node *desc;
 
-	desc = get_bl_mem_params_node(SCP_BL2_IMAGE_ID);
-	assert(desc != NULL);
-	desc->image_info.h.attr |= IMAGE_ATTRIB_SKIP_LOADING;
+	desc = get_bl_mem_params_node(image_id);
+	assert(desc);
+	return &desc->image_info;
 }
diff --git a/plat/socionext/uniphier/uniphier_io_storage.c b/plat/socionext/uniphier/uniphier_io_storage.c
index bc31350..ed1f6fa 100644
--- a/plat/socionext/uniphier/uniphier_io_storage.c
+++ b/plat/socionext/uniphier/uniphier_io_storage.c
@@ -18,8 +18,11 @@
 
 #include "uniphier.h"
 
-#define UNIPHIER_ROM_REGION_BASE	0x00000000
-#define UNIPHIER_ROM_REGION_SIZE	0x10000000
+#define UNIPHIER_ROM_REGION_BASE	0x00000000ULL
+#define UNIPHIER_ROM_REGION_SIZE	0x10000000ULL
+
+#define UNIPHIER_OCM_REGION_BASE	0x30000000ULL
+#define UNIPHIER_OCM_REGION_SIZE	0x00040000ULL
 
 static const io_dev_connector_t *uniphier_fip_dev_con;
 static uintptr_t uniphier_fip_dev_handle;
@@ -271,6 +274,18 @@
 	if (ret)
 		return ret;
 
+	/*
+	 * on-chip SRAM region: should be DEVICE attribute because the USB
+	 * load functions provided by the ROM use this memory region as a work
+	 * area, but do not cater to cache coherency.
+	 */
+	ret = mmap_add_dynamic_region(UNIPHIER_OCM_REGION_BASE,
+				      UNIPHIER_OCM_REGION_BASE,
+				      UNIPHIER_OCM_REGION_SIZE,
+				      MT_DEVICE | MT_RW | MT_SECURE);
+	if (ret)
+		return ret;
+
 	ret = uniphier_usb_init(soc_id, &block_dev_spec);
 	if (ret)
 		return ret;
diff --git a/plat/socionext/uniphier/uniphier_xlat_setup.c b/plat/socionext/uniphier/uniphier_xlat_setup.c
index 6532c49..3112ecd 100644
--- a/plat/socionext/uniphier/uniphier_xlat_setup.c
+++ b/plat/socionext/uniphier/uniphier_xlat_setup.c
@@ -8,11 +8,8 @@
 #include <platform_def.h>
 #include <xlat_tables_v2.h>
 
-#define UNIPHIER_OCM_REGION_BASE	0x30000000
-#define UNIPHIER_OCM_REGION_SIZE	0x00040000
-
-#define UNIPHIER_REG_REGION_BASE	0x50000000
-#define UNIPHIER_REG_REGION_SIZE	0x20000000
+#define UNIPHIER_REG_REGION_BASE	0x50000000ULL
+#define UNIPHIER_REG_REGION_SIZE	0x20000000ULL
 
 void uniphier_mmap_setup(uintptr_t total_base, size_t total_size,
 			 const struct mmap_region *mmap)
@@ -37,15 +34,6 @@
 			BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE,
 			MT_DEVICE | MT_RW | MT_SECURE);
 
-	/*
-	 * on-chip SRAM region: should be DEVICE attribute because the USB
-	 * load functions provided by the ROM use this memory region as a work
-	 * area, but do not cater to cache coherency.
-	 */
-	mmap_add_region(UNIPHIER_OCM_REGION_BASE, UNIPHIER_OCM_REGION_BASE,
-			UNIPHIER_OCM_REGION_SIZE,
-			MT_DEVICE | MT_RW | MT_SECURE);
-
 	/* register region */
 	mmap_add_region(UNIPHIER_REG_REGION_BASE, UNIPHIER_REG_REGION_BASE,
 			UNIPHIER_REG_REGION_SIZE,
diff --git a/plat/xilinx/zynqmp/platform.mk b/plat/xilinx/zynqmp/platform.mk
index bdd194b..bddf305 100644
--- a/plat/xilinx/zynqmp/platform.mk
+++ b/plat/xilinx/zynqmp/platform.mk
@@ -14,6 +14,8 @@
 # Do not enable SVE
 ENABLE_SVE_FOR_NS	:= 0
 
+WORKAROUND_CVE_2017_5715	:=	0
+
 ifdef ZYNQMP_ATF_MEM_BASE
     $(eval $(call add_define,ZYNQMP_ATF_MEM_BASE))
 
diff --git a/services/arm_arch_svc/arm_arch_svc_setup.c b/services/arm_arch_svc/arm_arch_svc_setup.c
new file mode 100644
index 0000000..eedac86
--- /dev/null
+++ b/services/arm_arch_svc/arm_arch_svc_setup.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arm_arch_svc.h>
+#include <debug.h>
+#include <runtime_svc.h>
+#include <smcc.h>
+#include <smcc_helpers.h>
+
+static int32_t smccc_version(void)
+{
+	return MAKE_SMCCC_VERSION(SMCCC_MAJOR_VERSION, SMCCC_MINOR_VERSION);
+}
+
+static int32_t smccc_arch_features(u_register_t arg)
+{
+	switch (arg) {
+	case SMCCC_VERSION:
+	case SMCCC_ARCH_FEATURES:
+		return SMC_OK;
+#if WORKAROUND_CVE_2017_5715
+	case SMCCC_ARCH_WORKAROUND_1:
+		return SMC_OK;
+#endif
+	default:
+		return SMC_UNK;
+	}
+}
+
+/*
+ * Top-level Arm Architectural Service SMC handler.
+ */
+uintptr_t arm_arch_svc_smc_handler(uint32_t smc_fid,
+	u_register_t x1,
+	u_register_t x2,
+	u_register_t x3,
+	u_register_t x4,
+	void *cookie,
+	void *handle,
+	u_register_t flags)
+{
+	switch (smc_fid) {
+	case SMCCC_VERSION:
+		SMC_RET1(handle, smccc_version());
+	case SMCCC_ARCH_FEATURES:
+		SMC_RET1(handle, smccc_arch_features(x1));
+#if WORKAROUND_CVE_2017_5715
+	case SMCCC_ARCH_WORKAROUND_1:
+		/*
+		 * The workaround has already been applied on affected PEs
+		 * during entry to EL3.  On unaffected PEs, this function
+		 * has no effect.
+		 */
+		SMC_RET0(handle);
+#endif
+	default:
+		WARN("Unimplemented Arm Architecture Service Call: 0x%x \n",
+			smc_fid);
+		SMC_RET1(handle, SMC_UNK);
+	}
+}
+
+/* Register Standard Service Calls as runtime service */
+DECLARE_RT_SVC(
+		arm_arch_svc,
+		OEN_ARM_START,
+		OEN_ARM_END,
+		SMC_TYPE_FAST,
+		NULL,
+		arm_arch_svc_smc_handler
+);