diff --git a/drivers/arm/tzc/tzc400.c b/drivers/arm/tzc/tzc400.c
new file mode 100644
index 0000000..ee6bf8d
--- /dev/null
+++ b/drivers/arm/tzc/tzc400.c
@@ -0,0 +1,259 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <debug.h>
+#include <mmio.h>
+#include <stddef.h>
+#include <tzc400.h>
+#include "tzc_common_private.c"
+
+/*
+ * Macros which will be used by common core functions.
+ */
+#define TZC_400_REGION_BASE_LOW_0_OFFSET	0x100
+#define TZC_400_REGION_BASE_HIGH_0_OFFSET	0x104
+#define TZC_400_REGION_TOP_LOW_0_OFFSET		0x108
+#define TZC_400_REGION_TOP_HIGH_0_OFFSET	0x10c
+#define TZC_400_REGION_ATTR_0_OFFSET		0x110
+#define TZC_400_REGION_ID_ACCESS_0_OFFSET	0x114
+
+/*
+ * Implementation defined values used to validate inputs later.
+ * Filters : max of 4 ; 0 to 3
+ * Regions : max of 9 ; 0 to 8
+ * Address width : Values between 32 to 64
+ */
+typedef struct tzc400_instance {
+	uintptr_t base;
+	uint8_t addr_width;
+	uint8_t num_filters;
+	uint8_t num_regions;
+} tzc400_instance_t;
+
+tzc400_instance_t tzc400;
+
+static inline unsigned int _tzc400_read_build_config(uintptr_t base)
+{
+	return mmio_read_32(base + BUILD_CONFIG_OFF);
+}
+
+static inline unsigned int _tzc400_read_gate_keeper(uintptr_t base)
+{
+	return mmio_read_32(base + GATE_KEEPER_OFF);
+}
+
+static inline void _tzc400_write_gate_keeper(uintptr_t base, unsigned int val)
+{
+	mmio_write_32(base + GATE_KEEPER_OFF, val);
+}
+
+/*
+ * Get the open status information for all filter units.
+ */
+#define get_gate_keeper_os(base)	((_tzc400_read_gate_keeper(base) >>	\
+					GATE_KEEPER_OS_SHIFT) &		\
+					GATE_KEEPER_OS_MASK)
+
+
+/* Define common core functions used across different TZC peripherals. */
+DEFINE_TZC_COMMON_WRITE_ACTION(400, 400)
+DEFINE_TZC_COMMON_WRITE_REGION_BASE(400, 400)
+DEFINE_TZC_COMMON_WRITE_REGION_TOP(400, 400)
+DEFINE_TZC_COMMON_WRITE_REGION_ATTRIBUTES(400, 400)
+DEFINE_TZC_COMMON_WRITE_REGION_ID_ACCESS(400, 400)
+DEFINE_TZC_COMMON_CONFIGURE_REGION0(400)
+DEFINE_TZC_COMMON_CONFIGURE_REGION(400)
+
+static unsigned int _tzc400_get_gate_keeper(uintptr_t base,
+				unsigned int filter)
+{
+	unsigned int open_status;
+
+	open_status = get_gate_keeper_os(base);
+
+	return (open_status >> filter) & GATE_KEEPER_FILTER_MASK;
+}
+
+/* This function is not MP safe. */
+static void _tzc400_set_gate_keeper(uintptr_t base,
+				unsigned int filter,
+				int val)
+{
+	unsigned int open_status;
+
+	/* Upper half is current state. Lower half is requested state. */
+	open_status = get_gate_keeper_os(base);
+
+	if (val)
+		open_status |=  (1 << filter);
+	else
+		open_status &= ~(1 << filter);
+
+	_tzc400_write_gate_keeper(base, (open_status & GATE_KEEPER_OR_MASK) <<
+			      GATE_KEEPER_OR_SHIFT);
+
+	/* Wait here until we see the change reflected in the TZC status. */
+	while ((get_gate_keeper_os(base)) != open_status)
+		;
+}
+
+void tzc400_set_action(tzc_action_t action)
+{
+	assert(tzc400.base);
+	assert(action <= TZC_ACTION_ERR_INT);
+
+	/*
+	 * - Currently no handler is provided to trap an error via interrupt
+	 *   or exception.
+	 * - The interrupt action has not been tested.
+	 */
+	_tzc400_write_action(tzc400.base, action);
+}
+
+void tzc400_init(uintptr_t base)
+{
+#if DEBUG
+	unsigned int tzc400_id;
+#endif
+	unsigned int tzc400_build;
+
+	assert(base);
+	tzc400.base = base;
+
+#if DEBUG
+	tzc400_id = _tzc_read_peripheral_id(base);
+	if (tzc400_id != TZC_400_PERIPHERAL_ID) {
+		ERROR("TZC-400 : Wrong device ID (0x%x).\n", tzc400_id);
+		panic();
+	}
+#endif
+
+	/* Save values we will use later. */
+	tzc400_build = _tzc400_read_build_config(tzc400.base);
+	tzc400.num_filters = ((tzc400_build >> BUILD_CONFIG_NF_SHIFT) &
+			   BUILD_CONFIG_NF_MASK) + 1;
+	tzc400.addr_width  = ((tzc400_build >> BUILD_CONFIG_AW_SHIFT) &
+			   BUILD_CONFIG_AW_MASK) + 1;
+	tzc400.num_regions = ((tzc400_build >> BUILD_CONFIG_NR_SHIFT) &
+			   BUILD_CONFIG_NR_MASK) + 1;
+}
+
+/*
+ * `tzc400_configure_region0` is used to program region 0 into the TrustZone
+ * controller. Region 0 covers the whole address space that is not mapped
+ * to any other region, and is enabled on all filters; this cannot be
+ * changed. This function only changes the access permissions.
+ */
+void tzc400_configure_region0(tzc_region_attributes_t sec_attr,
+			   unsigned int ns_device_access)
+{
+	assert(tzc400.base);
+	assert(sec_attr <= TZC_REGION_S_RDWR);
+
+	_tzc400_configure_region0(tzc400.base, sec_attr, ns_device_access);
+}
+
+/*
+ * `tzc400_configure_region` is used to program regions into the TrustZone
+ * controller. A region can be associated with more than one filter. The
+ * associated filters are passed in as a bitmap (bit0 = filter0).
+ * NOTE:
+ * Region 0 is special; it is preferable to use tzc400_configure_region0
+ * for this region (see comment for that function).
+ */
+void tzc400_configure_region(unsigned int filters,
+			  int region,
+			  uintptr_t region_base,
+			  uintptr_t region_top,
+			  tzc_region_attributes_t sec_attr,
+			  unsigned int nsaid_permissions)
+{
+	assert(tzc400.base);
+
+	/* Do range checks on filters and regions. */
+	assert(((filters >> tzc400.num_filters) == 0) &&
+	       (region >= 0) && (region < tzc400.num_regions));
+
+	/*
+	 * Do address range check based on TZC configuration. A 64bit address is
+	 * the max and expected case.
+	 */
+	assert(((region_top <= (UINT64_MAX >> (64 - tzc400.addr_width))) &&
+		(region_base < region_top)));
+
+	/* region_base and (region_top + 1) must be 4KB aligned */
+	assert(((region_base | (region_top + 1)) & (4096 - 1)) == 0);
+
+	assert(sec_attr <= TZC_REGION_S_RDWR);
+
+	_tzc400_configure_region(tzc400.base, filters, region, region_base,
+						region_top,
+						sec_attr, nsaid_permissions);
+}
+
+void tzc400_enable_filters(void)
+{
+	unsigned int state;
+	unsigned int filter;
+
+	assert(tzc400.base);
+
+	for (filter = 0; filter < tzc400.num_filters; filter++) {
+		state = _tzc400_get_gate_keeper(tzc400.base, filter);
+		if (state) {
+			/* The TZC filter is already configured. Changing the
+			 * programmer's view in an active system can cause
+			 * unpredictable behavior therefore panic for now rather
+			 * than try to determine whether this is safe in this
+			 * instance. See:
+			 * http://infocenter.arm.com/help/index.jsp?\
+			 * topic=/com.arm.doc.ddi0504c/CJHHECBF.html */
+			ERROR("TZC-400 : Filter %d Gatekeeper already"
+				" enabled.\n", filter);
+			panic();
+		}
+		_tzc400_set_gate_keeper(tzc400.base, filter, 1);
+	}
+}
+
+void tzc400_disable_filters(void)
+{
+	unsigned int filter;
+
+	assert(tzc400.base);
+
+	/*
+	 * We don't do the same state check as above as the Gatekeepers are
+	 * disabled after reset.
+	 */
+	for (filter = 0; filter < tzc400.num_filters; filter++)
+		_tzc400_set_gate_keeper(tzc400.base, filter, 0);
+}
diff --git a/drivers/arm/tzc/tzc_common_private.c b/drivers/arm/tzc/tzc_common_private.c
new file mode 100644
index 0000000..f570daf
--- /dev/null
+++ b/drivers/arm/tzc/tzc_common_private.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <mmio.h>
+#include <tzc_common.h>
+
+#define DEFINE_TZC_COMMON_WRITE_ACTION(fn_name, macro_name)		\
+	static inline void _tzc##fn_name##_write_action(		\
+					uintptr_t base,			\
+					tzc_action_t action)		\
+	{								\
+		mmio_write_32(base + TZC_##macro_name##_ACTION_OFF,	\
+			action);					\
+	}
+
+#define DEFINE_TZC_COMMON_WRITE_REGION_BASE(fn_name, macro_name)	\
+	static inline void _tzc##fn_name##_write_region_base(		\
+						uintptr_t base,		\
+						int region_no,		\
+						uintptr_t region_base)	\
+	{								\
+		mmio_write_32(base +					\
+			TZC_REGION_OFFSET(				\
+				TZC_##macro_name##_REGION_SIZE,		\
+				region_no) +				\
+				TZC_##macro_name##_REGION_BASE_LOW_0_OFFSET,	\
+			(unsigned int)region_base);			\
+		mmio_write_32(base +					\
+			TZC_REGION_OFFSET(				\
+				TZC_##macro_name##_REGION_SIZE,		\
+				region_no) +				\
+			TZC_##macro_name##_REGION_BASE_HIGH_0_OFFSET,	\
+			(unsigned int)(region_base >> 32));		\
+	}
+
+#define DEFINE_TZC_COMMON_WRITE_REGION_TOP(fn_name, macro_name)		\
+	static inline void _tzc##fn_name##_write_region_top(		\
+						uintptr_t base,		\
+						int region_no,		\
+						uintptr_t region_top)	\
+	{								\
+		mmio_write_32(base +					\
+			TZC_REGION_OFFSET				\
+				(TZC_##macro_name##_REGION_SIZE,	\
+				region_no) +				\
+			TZC_##macro_name##_REGION_TOP_LOW_0_OFFSET,	\
+			(unsigned int)region_top);			\
+		mmio_write_32(base +					\
+			TZC_REGION_OFFSET(				\
+				TZC_##macro_name##_REGION_SIZE,		\
+				region_no) +				\
+			TZC_##macro_name##_REGION_TOP_HIGH_0_OFFSET,	\
+			(unsigned int)(region_top >> 32));		\
+	}
+
+#define DEFINE_TZC_COMMON_WRITE_REGION_ATTRIBUTES(fn_name, macro_name)	\
+	static inline void _tzc##fn_name##_write_region_attributes(	\
+						uintptr_t base,		\
+						int region_no,		\
+						unsigned int attr)	\
+	{								\
+		mmio_write_32(base +					\
+			TZC_REGION_OFFSET(				\
+				TZC_##macro_name##_REGION_SIZE,		\
+				region_no) +				\
+			TZC_##macro_name##_REGION_ATTR_0_OFFSET,	\
+			attr);						\
+	}
+
+#define DEFINE_TZC_COMMON_WRITE_REGION_ID_ACCESS(fn_name, macro_name)	\
+	static inline void _tzc##fn_name##_write_region_id_access(	\
+						uintptr_t base,		\
+						int region_no,		\
+						unsigned int val)	\
+	{								\
+		mmio_write_32(base +					\
+			TZC_REGION_OFFSET(				\
+				TZC_##macro_name##_REGION_SIZE,		\
+				region_no) +				\
+			TZC_##macro_name##_REGION_ID_ACCESS_0_OFFSET,	\
+			val);						\
+	}
+
+/*
+ * It is used to program region 0 ATTRIBUTES and ACCESS register.
+ */
+#define DEFINE_TZC_COMMON_CONFIGURE_REGION0(fn_name)			\
+	void _tzc##fn_name##_configure_region0(uintptr_t base,		\
+			   tzc_region_attributes_t sec_attr,		\
+			   unsigned int ns_device_access)		\
+	{								\
+		assert(base);						\
+		VERBOSE("TrustZone : Configuring region 0 "		\
+			"(TZC Interface Base=%p sec_attr=0x%x,"		\
+			" ns_devs=0x%x)\n", (void *)base,		\
+			sec_attr, ns_device_access);			\
+									\
+		/* Set secure attributes on region 0 */			\
+		_tzc##fn_name##_write_region_attributes(base, 0,	\
+			sec_attr << TZC_REGION_ATTR_SEC_SHIFT);		\
+									\
+		/***************************************************/	\
+		/* Specify which non-secure devices have permission*/	\
+		/* to access region 0.				   */	\
+		/***************************************************/	\
+		_tzc##fn_name##_write_region_id_access(base,		\
+						0,			\
+						ns_device_access);	\
+	}
+
+/*
+ * It is used to program a region from 1 to 8 in the TrustZone controller.
+ * NOTE:
+ * Region 0 is special; it is preferable to use
+ * ##fn_name##_configure_region0 for this region (see comment for
+ * that function).
+ */
+#define DEFINE_TZC_COMMON_CONFIGURE_REGION(fn_name)			\
+	void _tzc##fn_name##_configure_region(uintptr_t base,		\
+				unsigned int filters,			\
+				int region_no,				\
+				uintptr_t region_base,			\
+				uintptr_t region_top,			\
+				tzc_region_attributes_t sec_attr,	\
+				unsigned int nsaid_permissions)	\
+	{								\
+		assert(base);						\
+		VERBOSE("TrustZone : Configuring region "		\
+			"(TZC Interface Base: %p, region_no = %d)"	\
+			"...\n", (void *)base, region_no);		\
+		VERBOSE("TrustZone : ... base = %p, top = %p,"		\
+			"\n", (void *)region_base, (void *)region_top);\
+		VERBOSE("TrustZone : ... sec_attr = 0x%x,"		\
+			" ns_devs = 0x%x)\n",				\
+			sec_attr, nsaid_permissions);			\
+									\
+		/***************************************************/	\
+		/* Inputs look ok, start programming registers.    */	\
+		/* All the address registers are 32 bits wide and  */	\
+		/* have a LOW and HIGH				   */	\
+		/* component used to construct an address up to a  */	\
+		/* 64bit.					   */	\
+		/***************************************************/	\
+		_tzc##fn_name##_write_region_base(base,			\
+					region_no, region_base);	\
+		_tzc##fn_name##_write_region_top(base,			\
+					region_no, region_top);		\
+									\
+		/* Enable filter to the region and set secure attributes */\
+		_tzc##fn_name##_write_region_attributes(base,		\
+				region_no,				\
+				(sec_attr << TZC_REGION_ATTR_SEC_SHIFT) |\
+				(filters << TZC_REGION_ATTR_F_EN_SHIFT));\
+									\
+		/***************************************************/	\
+		/* Specify which non-secure devices have permission*/	\
+		/* to access this region.			   */	\
+		/***************************************************/	\
+		_tzc##fn_name##_write_region_id_access(base,		\
+						region_no,		\
+						nsaid_permissions);	\
+	}
+
+#if DEBUG
+static unsigned int _tzc_read_peripheral_id(uintptr_t base)
+{
+	unsigned int id;
+
+	id = mmio_read_32(base + PID0_OFF);
+	/* Masks DESC part in PID1 */
+	id |= ((mmio_read_32(base + PID1_OFF) & 0xF) << 8);
+
+	return id;
+}
+#endif