fconf: Clean confused naming between TB_FW and FW_CONFIG
Cleaned up confused naming between TB_FW and FW_CONFIG.
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I9e9f6e6ca076d38fee0388f97d370431ae067f08
diff --git a/drivers/arm/css/scp/css_bom_bootloader.c b/drivers/arm/css/scp/css_bom_bootloader.c
index 1fc1270..74121b4 100644
--- a/drivers/arm/css/scp/css_bom_bootloader.c
+++ b/drivers/arm/css/scp/css_bom_bootloader.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -51,13 +51,13 @@
* All CSS platforms load SCP_BL2/SCP_BL2U just below BL2 (this is where BL31
* usually resides except when ARM_BL31_IN_DRAM is
* set). Ensure that SCP_BL2/SCP_BL2U do not overflow into shared RAM and
- * the tb_fw_config.
+ * the fw_config.
*/
CASSERT(SCP_BL2_LIMIT <= BL2_BASE, assert_scp_bl2_overwrite_bl2);
CASSERT(SCP_BL2U_LIMIT <= BL2_BASE, assert_scp_bl2u_overwrite_bl2);
-CASSERT(SCP_BL2_BASE >= ARM_TB_FW_CONFIG_LIMIT, assert_scp_bl2_overflow);
-CASSERT(SCP_BL2U_BASE >= ARM_TB_FW_CONFIG_LIMIT, assert_scp_bl2u_overflow);
+CASSERT(SCP_BL2_BASE >= ARM_FW_CONFIG_LIMIT, assert_scp_bl2_overflow);
+CASSERT(SCP_BL2U_BASE >= ARM_FW_CONFIG_LIMIT, assert_scp_bl2u_overflow);
static void scp_boot_message_start(void)
{
diff --git a/include/drivers/arm/css/css_scp.h b/include/drivers/arm/css/css_scp.h
index f3c08c5..2b506ea 100644
--- a/include/drivers/arm/css/css_scp.h
+++ b/include/drivers/arm/css/css_scp.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -40,13 +40,13 @@
/*
* All CSS platforms load SCP_BL2/SCP_BL2U just below BL2 (this is where BL31
* usually resides except when ARM_BL31_IN_DRAM is
- * set). Ensure that SCP_BL2/SCP_BL2U do not overflow into tb_fw_config.
+ * set). Ensure that SCP_BL2/SCP_BL2U do not overflow into fw_config.
*/
CASSERT(SCP_BL2_LIMIT <= BL2_BASE, assert_scp_bl2_overwrite_bl2);
CASSERT(SCP_BL2U_LIMIT <= BL2_BASE, assert_scp_bl2u_overwrite_bl2);
-CASSERT(SCP_BL2_BASE >= ARM_TB_FW_CONFIG_LIMIT, assert_scp_bl2_overflow);
-CASSERT(SCP_BL2U_BASE >= ARM_TB_FW_CONFIG_LIMIT, assert_scp_bl2u_overflow);
+CASSERT(SCP_BL2_BASE >= ARM_FW_CONFIG_LIMIT, assert_scp_bl2_overflow);
+CASSERT(SCP_BL2U_BASE >= ARM_FW_CONFIG_LIMIT, assert_scp_bl2u_overflow);
#endif
#endif /* CSS_SCP_H */
diff --git a/include/plat/arm/common/arm_def.h b/include/plat/arm/common/arm_def.h
index 89f7c61..a6b6b2e 100644
--- a/include/plat/arm/common/arm_def.h
+++ b/include/plat/arm/common/arm_def.h
@@ -346,24 +346,24 @@
#define CACHE_WRITEBACK_GRANULE (U(1) << ARM_CACHE_WRITEBACK_SHIFT)
/*
- * To enable TB_FW_CONFIG to be loaded by BL1, define the corresponding base
+ * To enable FW_CONFIG to be loaded by BL1, define the corresponding base
* and limit. Leave enough space of BL2 meminfo.
*/
-#define ARM_TB_FW_CONFIG_BASE (ARM_BL_RAM_BASE + sizeof(meminfo_t))
-#define ARM_TB_FW_CONFIG_LIMIT (ARM_BL_RAM_BASE + (PAGE_SIZE / 2U))
+#define ARM_FW_CONFIG_BASE (ARM_BL_RAM_BASE + sizeof(meminfo_t))
+#define ARM_FW_CONFIG_LIMIT (ARM_BL_RAM_BASE + (PAGE_SIZE / 2U))
/*
* Boot parameters passed from BL2 to BL31/BL32 are stored here
*/
-#define ARM_BL2_MEM_DESC_BASE ARM_TB_FW_CONFIG_LIMIT
+#define ARM_BL2_MEM_DESC_BASE ARM_FW_CONFIG_LIMIT
#define ARM_BL2_MEM_DESC_LIMIT (ARM_BL2_MEM_DESC_BASE + \
(PAGE_SIZE / 2U))
/*
* Define limit of firmware configuration memory:
- * ARM_TB_FW_CONFIG + ARM_BL2_MEM_DESC memory
+ * ARM_FW_CONFIG + ARM_BL2_MEM_DESC memory
*/
-#define ARM_FW_CONFIG_LIMIT (ARM_BL_RAM_BASE + PAGE_SIZE)
+#define ARM_FW_CONFIGS_LIMIT (ARM_BL_RAM_BASE + PAGE_SIZE)
/*******************************************************************************
* BL1 specific defines.
@@ -461,7 +461,7 @@
* SP_MIN is the only BL image in SRAM. Allocate the whole of SRAM (excluding
* the page reserved for fw_configs) to BL32
*/
-# define BL32_BASE ARM_FW_CONFIG_LIMIT
+# define BL32_BASE ARM_FW_CONFIGS_LIMIT
# define BL32_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
# else
/* Put BL32 below BL2 in the Trusted SRAM.*/
@@ -505,7 +505,7 @@
# define TSP_SEC_MEM_BASE ARM_BL_RAM_BASE
# define TSP_SEC_MEM_SIZE ARM_BL_RAM_SIZE
# define TSP_PROGBITS_LIMIT BL31_BASE
-# define BL32_BASE ARM_FW_CONFIG_LIMIT
+# define BL32_BASE ARM_FW_CONFIGS_LIMIT
# define BL32_LIMIT BL31_BASE
# elif ARM_TSP_RAM_LOCATION_ID == ARM_TRUSTED_DRAM_ID
# define TSP_SEC_MEM_BASE PLAT_ARM_TRUSTED_DRAM_BASE
diff --git a/lib/fconf/fconf.c b/lib/fconf/fconf.c
index a5ec143..b99e7f0 100644
--- a/lib/fconf/fconf.c
+++ b/lib/fconf/fconf.c
@@ -24,9 +24,9 @@
.h.version = (uint8_t)VERSION_2,
.h.size = (uint16_t)sizeof(image_info_t),
.h.attr = 0,
- .image_base = ARM_TB_FW_CONFIG_BASE,
+ .image_base = ARM_FW_CONFIG_BASE,
.image_max_size = (uint32_t)
- (ARM_TB_FW_CONFIG_LIMIT - ARM_TB_FW_CONFIG_BASE)
+ (ARM_FW_CONFIG_LIMIT - ARM_FW_CONFIG_BASE)
};
VERBOSE("FCONF: Loading FW_CONFIG\n");
diff --git a/plat/arm/board/a5ds/include/platform_def.h b/plat/arm/board/a5ds/include/platform_def.h
index ab0ff58..0745316 100644
--- a/plat/arm/board/a5ds/include/platform_def.h
+++ b/plat/arm/board/a5ds/include/platform_def.h
@@ -188,11 +188,11 @@
#define CACHE_WRITEBACK_GRANULE (U(1) << ARM_CACHE_WRITEBACK_SHIFT)
/*
- * To enable TB_FW_CONFIG to be loaded by BL1, define the corresponding base
+ * To enable FW_CONFIG to be loaded by BL1, define the corresponding base
* and limit. Leave enough space of BL2 meminfo.
*/
-#define ARM_TB_FW_CONFIG_BASE (ARM_BL_RAM_BASE + sizeof(meminfo_t))
-#define ARM_TB_FW_CONFIG_LIMIT (ARM_BL_RAM_BASE + PAGE_SIZE)
+#define ARM_FW_CONFIG_BASE (ARM_BL_RAM_BASE + sizeof(meminfo_t))
+#define ARM_FW_CONFIG_LIMIT (ARM_BL_RAM_BASE + PAGE_SIZE)
/*******************************************************************************
* BL1 specific defines.
@@ -220,7 +220,7 @@
#define BL2_LIMIT BL1_RW_BASE
/* Put BL32 below BL2 in NS DRAM.*/
-#define ARM_BL2_MEM_DESC_BASE ARM_TB_FW_CONFIG_LIMIT
+#define ARM_BL2_MEM_DESC_BASE ARM_FW_CONFIG_LIMIT
#define BL32_BASE ((ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)\
- PLAT_ARM_MAX_BL32_SIZE)
diff --git a/plat/arm/board/corstone700/include/platform_def.h b/plat/arm/board/corstone700/include/platform_def.h
index cc4dc3a..7799cec 100644
--- a/plat/arm/board/corstone700/include/platform_def.h
+++ b/plat/arm/board/corstone700/include/platform_def.h
@@ -83,11 +83,11 @@
#define ARM_CACHE_WRITEBACK_SHIFT 6
/*
- * To enable TB_FW_CONFIG to be loaded by BL1, define the corresponding base
+ * To enable FW_CONFIG to be loaded by BL1, define the corresponding base
* and limit. Leave enough space for BL2 meminfo.
*/
-#define ARM_TB_FW_CONFIG_BASE (ARM_BL_RAM_BASE + sizeof(meminfo_t))
-#define ARM_TB_FW_CONFIG_LIMIT (ARM_BL_RAM_BASE + (PAGE_SIZE / 2U))
+#define ARM_FW_CONFIG_BASE (ARM_BL_RAM_BASE + sizeof(meminfo_t))
+#define ARM_FW_CONFIG_LIMIT (ARM_BL_RAM_BASE + (PAGE_SIZE / 2U))
/*
* The max number of regions like RO(code), coherent and data required by
diff --git a/plat/arm/board/fvp_ve/include/platform_def.h b/plat/arm/board/fvp_ve/include/platform_def.h
index 70a12ea..3591b4d 100644
--- a/plat/arm/board/fvp_ve/include/platform_def.h
+++ b/plat/arm/board/fvp_ve/include/platform_def.h
@@ -169,11 +169,11 @@
#define CACHE_WRITEBACK_GRANULE (U(1) << ARM_CACHE_WRITEBACK_SHIFT)
/*
- * To enable TB_FW_CONFIG to be loaded by BL1, define the corresponding base
+ * To enable FW_CONFIG to be loaded by BL1, define the corresponding base
* and limit. Leave enough space of BL2 meminfo.
*/
-#define ARM_TB_FW_CONFIG_BASE (ARM_BL_RAM_BASE + sizeof(meminfo_t))
-#define ARM_TB_FW_CONFIG_LIMIT (ARM_BL_RAM_BASE + PAGE_SIZE)
+#define ARM_FW_CONFIG_BASE (ARM_BL_RAM_BASE + sizeof(meminfo_t))
+#define ARM_FW_CONFIG_LIMIT (ARM_BL_RAM_BASE + PAGE_SIZE)
/*******************************************************************************
* BL1 specific defines.
@@ -204,7 +204,7 @@
/* Put BL32 below BL2 in NS DRAM.*/
-#define ARM_BL2_MEM_DESC_BASE ARM_TB_FW_CONFIG_LIMIT
+#define ARM_BL2_MEM_DESC_BASE ARM_FW_CONFIG_LIMIT
#define BL32_BASE ((ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)\
- PLAT_ARM_MAX_BL32_SIZE)
diff --git a/plat/arm/board/juno/include/platform_def.h b/plat/arm/board/juno/include/platform_def.h
index 67802d4..cd96155 100644
--- a/plat/arm/board/juno/include/platform_def.h
+++ b/plat/arm/board/juno/include/platform_def.h
@@ -254,7 +254,7 @@
* BL31 is loaded over the top.
*/
#define PLAT_CSS_MAX_SCP_BL2_SIZE \
- ((SCP_BL2_LIMIT - ARM_TB_FW_CONFIG_LIMIT) & ~PAGE_SIZE_MASK)
+ ((SCP_BL2_LIMIT - ARM_FW_CONFIG_LIMIT) & ~PAGE_SIZE_MASK)
#define PLAT_CSS_MAX_SCP_BL2U_SIZE PLAT_CSS_MAX_SCP_BL2_SIZE
diff --git a/plat/arm/common/arm_bl2_setup.c b/plat/arm/common/arm_bl2_setup.c
index 6c3f64f..9d5526f 100644
--- a/plat/arm/common/arm_bl2_setup.c
+++ b/plat/arm/common/arm_bl2_setup.c
@@ -26,10 +26,10 @@
static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
/*
- * Check that BL2_BASE is above ARM_TB_FW_CONFIG_LIMIT. This reserved page is
+ * Check that BL2_BASE is above ARM_FW_CONFIG_LIMIT. This reserved page is
* for `meminfo_t` data structure and fw_configs passed from BL1.
*/
-CASSERT(BL2_BASE >= ARM_TB_FW_CONFIG_LIMIT, assert_bl2_base_overflows);
+CASSERT(BL2_BASE >= ARM_FW_CONFIG_LIMIT, assert_bl2_base_overflows);
/* Weak definitions may be overridden in specific ARM standard platform */
#pragma weak bl2_early_platform_setup2
@@ -50,7 +50,7 @@
* in x0. This memory layout is sitting at the base of the free trusted SRAM.
* Copy it to a safe location before its reclaimed by later BL2 functionality.
******************************************************************************/
-void arm_bl2_early_platform_setup(uintptr_t tb_fw_config,
+void arm_bl2_early_platform_setup(uintptr_t fw_config,
struct meminfo *mem_layout)
{
/* Initialize the console to provide early debug support */
@@ -60,8 +60,8 @@
bl2_tzram_layout = *mem_layout;
/* Fill the properties struct with the info from the config dtb */
- if (tb_fw_config != 0U) {
- fconf_populate("TB_FW", tb_fw_config);
+ if (fw_config != 0U) {
+ fconf_populate("TB_FW", fw_config);
}
/* Initialise the IO layer and register platform IO devices */
diff --git a/plat/arm/common/arm_bl31_setup.c b/plat/arm/common/arm_bl31_setup.c
index 85535c1..ded8f89 100644
--- a/plat/arm/common/arm_bl31_setup.c
+++ b/plat/arm/common/arm_bl31_setup.c
@@ -28,10 +28,10 @@
#if !RESET_TO_BL31
/*
- * Check that BL31_BASE is above ARM_TB_FW_CONFIG_LIMIT. The reserved page
+ * Check that BL31_BASE is above ARM_FW_CONFIG_LIMIT. The reserved page
* is required for SOC_FW_CONFIG/TOS_FW_CONFIG passed from BL2.
*/
-CASSERT(BL31_BASE >= ARM_TB_FW_CONFIG_LIMIT, assert_bl31_base_overflows);
+CASSERT(BL31_BASE >= ARM_FW_CONFIG_LIMIT, assert_bl31_base_overflows);
#endif
/* Weak definitions may be overridden in specific ARM standard platform */
diff --git a/plat/arm/common/arm_dyn_cfg.c b/plat/arm/common/arm_dyn_cfg.c
index ffa2a64..416cd12 100644
--- a/plat/arm/common/arm_dyn_cfg.c
+++ b/plat/arm/common/arm_dyn_cfg.c
@@ -170,8 +170,8 @@
/*
* BL2 utility function to initialize dynamic configuration specified by
- * TB_FW_CONFIG. Populate the bl_mem_params_node_t of other FW_CONFIGs if
- * specified in TB_FW_CONFIG.
+ * FW_CONFIG. Populate the bl_mem_params_node_t of other FW_CONFIGs if
+ * specified in FW_CONFIG.
*/
void arm_bl2_dyn_cfg_init(void)
{
diff --git a/plat/arm/common/sp_min/arm_sp_min_setup.c b/plat/arm/common/sp_min/arm_sp_min_setup.c
index 2904ad9..6100b78 100644
--- a/plat/arm/common/sp_min/arm_sp_min_setup.c
+++ b/plat/arm/common/sp_min/arm_sp_min_setup.c
@@ -29,10 +29,10 @@
MT_MEMORY | MT_RW | MT_SECURE)
/*
- * Check that BL32_BASE is above ARM_TB_FW_CONFIG_LIMIT. The reserved page
+ * Check that BL32_BASE is above ARM_FW_CONFIG_LIMIT. The reserved page
* is required for SOC_FW_CONFIG/TOS_FW_CONFIG passed from BL2.
*/
-CASSERT(BL32_BASE >= ARM_TB_FW_CONFIG_LIMIT, assert_bl32_base_overflows);
+CASSERT(BL32_BASE >= ARM_FW_CONFIG_LIMIT, assert_bl32_base_overflows);
/*******************************************************************************
* Return a pointer to the 'entry_point_info' structure of the next image for the
diff --git a/plat/arm/css/sgm/include/sgm_base_platform_def.h b/plat/arm/css/sgm/include/sgm_base_platform_def.h
index 8be0b34..2d8e677 100644
--- a/plat/arm/css/sgm/include/sgm_base_platform_def.h
+++ b/plat/arm/css/sgm/include/sgm_base_platform_def.h
@@ -138,7 +138,7 @@
* BL31 is loaded over the top.
*/
#define PLAT_CSS_MAX_SCP_BL2_SIZE \
- ((SCP_BL2_LIMIT - ARM_TB_FW_CONFIG_LIMIT) & ~PAGE_SIZE_MASK)
+ ((SCP_BL2_LIMIT - ARM_FW_CONFIG_LIMIT) & ~PAGE_SIZE_MASK)
#define PLAT_CSS_MAX_SCP_BL2U_SIZE PLAT_CSS_MAX_SCP_BL2_SIZE