feat(plat/nxp/ls1028ardb): add ls1028ardb board support
The LS1028A reference design board (RDB) is a computing,
evaluation, and development platform that supports industrial
IoT applications, human machine interface solutions, and
industrial networking.
It supports the following features:
1. Layerscape LS1028A dual-core processor based on Cortex-A72
at 1.3 GHz.
2. 4 GB DDR4 SDRAM w/ECC
3. Support Ethernet:
1) x1 RJ45 connector for 1Gbps Ethernet support w/TSN, 1588
2) x4 RJ45 connector for 1Gbps Ethernet switch support w/TSN,
1588 (QSGMII)
3. With Basic Peripherals and Interconnect
2x M.2 Type E slots with PCIe Gen 3.0 x1
1x M.2 Type B slot with SATA 3.0 (resistor mux with 1 Type E slot)
1x Type A USB 3.0 super-speed port
1x Type C USB 3.0 super-speed port
1x DisplayPort interface
2x DB9 RS232 serial ports
2x DB9 CAN interfaces
1x 3.5 mm audio out
2x MikroBUS™ sockets
Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Change-Id: I48ee254a488ae4af227641da3875a1e9a63a720c
diff --git a/plat/nxp/soc-ls1028a/ls1028ardb/plat_def.h b/plat/nxp/soc-ls1028a/ls1028ardb/plat_def.h
new file mode 100644
index 0000000..63c0219
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/ls1028ardb/plat_def.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright 2018-2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_DEF_H
+#define PLAT_DEF_H
+
+#include <arch.h>
+#include <cortex_a72.h>
+/*
+ * Required without TBBR.
+ * To include the defines for DDR PHY
+ * Images.
+ */
+#include <tbbr_img_def.h>
+
+#include <policy.h>
+#include <soc.h>
+
+
+#define NXP_SYSCLK_FREQ 100000000
+#define NXP_DDRCLK_FREQ 100000000
+
+/* UART related definition */
+#define NXP_CONSOLE_ADDR NXP_UART_ADDR
+#define NXP_CONSOLE_BAUDRATE 115200
+
+#define NXP_SPD_EEPROM0 0x51
+
+/* Size of cacheable stacks */
+#if defined(IMAGE_BL2)
+#if defined(TRUSTED_BOARD_BOOT)
+#define PLATFORM_STACK_SIZE 0x2000
+#else
+#define PLATFORM_STACK_SIZE 0x1000
+#endif
+#elif defined(IMAGE_BL31)
+#define PLATFORM_STACK_SIZE 0x1000
+#endif
+
+/* SD block buffer */
+#define NXP_SD_BLOCK_BUF_SIZE (0xC000)
+
+#ifdef SD_BOOT
+#define BL2_LIMIT (NXP_OCRAM_ADDR + NXP_OCRAM_SIZE \
+ - NXP_SD_BLOCK_BUF_SIZE)
+#else
+#define BL2_LIMIT (NXP_OCRAM_ADDR + NXP_OCRAM_SIZE)
+#endif
+#define BL2_TEXT_LIMIT (BL2_LIMIT)
+
+/* IO defines as needed by IO driver framework */
+#define MAX_IO_DEVICES 4
+#define MAX_IO_BLOCK_DEVICES 1
+#define MAX_IO_HANDLES 4
+
+#define BL31_WDOG_SEC 89
+
+/*
+ * Define properties of Group 1 Secure and Group 0 interrupts as per GICv3
+ * terminology. On a GICv2 system or mode, the lists will be merged and treated
+ * as Group 0 interrupts.
+ */
+#define PLAT_LS_G1S_IRQ_PROPS(grp) \
+ INTR_PROP_DESC(BL32_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
+ GIC_INTR_CFG_EDGE)
+
+/* SGI 15 and Secure watchdog interrupts assigned to Group 0 */
+#define PLAT_LS_G0_IRQ_PROPS(grp) \
+ INTR_PROP_DESC(BL31_WDOG_SEC, GIC_HIGHEST_SEC_PRIORITY, grp, \
+ GIC_INTR_CFG_EDGE), \
+ INTR_PROP_DESC(15, GIC_HIGHEST_SEC_PRIORITY, grp, \
+ GIC_INTR_CFG_LEVEL)
+#endif /* PLAT_DEF_H */