diff --git a/bl31/interrupt_mgmt.c b/bl31/interrupt_mgmt.c
new file mode 100644
index 0000000..2b0c797
--- /dev/null
+++ b/bl31/interrupt_mgmt.c
@@ -0,0 +1,206 @@
+/*
+ * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <bl_common.h>
+#include <context_mgmt.h>
+#include <errno.h>
+#include <interrupt_mgmt.h>
+#include <platform.h>
+#include <stdio.h>
+
+/*******************************************************************************
+ * Local structure and corresponding array to keep track of the state of the
+ * registered interrupt handlers for each interrupt type.
+ * The field descriptions are:
+ *
+ * 'flags' : Bit[0], Routing model for this interrupt type when execution is
+ *                   not in EL3 in the secure state. '1' implies that this
+ *                   interrupt will be routed to EL3. '0' implies that this
+ *                   interrupt will be routed to the current exception level.
+ *
+ *           Bit[1], Routing model for this interrupt type when execution is
+ *                   not in EL3 in the non-secure state. '1' implies that this
+ *                   interrupt will be routed to EL3. '0' implies that this
+ *                   interrupt will be routed to the current exception level.
+ *
+ *           All other bits are reserved and SBZ.
+ *
+ * 'scr_el3[2]'  : Mapping of the routing model in the 'flags' field to the
+ *                 value of the SCR_EL3.IRQ or FIQ bit for each security state.
+ *                 There are two instances of this field corresponding to the
+ *                 two security states.
+ ******************************************************************************/
+typedef struct intr_type_desc {
+	interrupt_type_handler_t handler;
+	uint32_t flags;
+	uint32_t scr_el3[2];
+} intr_type_desc_t;
+
+static intr_type_desc_t intr_type_descs[MAX_INTR_TYPES];
+
+/*******************************************************************************
+ * This function validates the interrupt type. EL3 interrupts are currently not
+ * supported.
+ ******************************************************************************/
+static int32_t validate_interrupt_type(uint32_t type)
+{
+	if (type == INTR_TYPE_EL3)
+		return -ENOTSUP;
+
+	if (type != INTR_TYPE_S_EL1 && type != INTR_TYPE_NS)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*******************************************************************************
+* This function validates the routing model for this type of interrupt
+ ******************************************************************************/
+static int32_t validate_routing_model(uint32_t type, uint32_t flags)
+{
+	flags >>= INTR_RM_FLAGS_SHIFT;
+	flags &= INTR_RM_FLAGS_MASK;
+
+	if (type == INTR_TYPE_S_EL1)
+		return validate_sel1_interrupt_rm(flags);
+
+	if (type == INTR_TYPE_NS)
+		return validate_ns_interrupt_rm(flags);
+
+	return -EINVAL;
+}
+
+/*******************************************************************************
+ * This function returns the cached copy of the SCR_EL3 which contains the
+ * routing model (expressed through the IRQ and FIQ bits) for a security state
+ * which was stored through a call to 'set_routing_model()' earlier.
+ ******************************************************************************/
+uint32_t get_scr_el3_from_routing_model(uint32_t security_state)
+{
+	uint32_t scr_el3;
+
+	assert(security_state <= NON_SECURE);
+	scr_el3 = intr_type_descs[INTR_TYPE_NS].scr_el3[security_state];
+	scr_el3 |= intr_type_descs[INTR_TYPE_S_EL1].scr_el3[security_state];
+	scr_el3 |= intr_type_descs[INTR_TYPE_EL3].scr_el3[security_state];
+	return scr_el3;
+}
+
+/*******************************************************************************
+ * This function uses the 'interrupt_type_flags' parameter to obtain the value
+ * of the trap bit (IRQ/FIQ) in the SCR_EL3 for a security state for this
+ * interrupt type. It uses it to update the SCR_EL3 in the cpu context and the
+ * 'intr_type_desc' for that security state.
+ ******************************************************************************/
+static void set_scr_el3_from_rm(uint32_t type,
+				uint32_t interrupt_type_flags,
+				uint32_t security_state)
+{
+	uint32_t flag, bit_pos;
+
+	flag = get_interrupt_rm_flag(interrupt_type_flags, security_state);
+	bit_pos = plat_interrupt_type_to_line(type, security_state);
+	intr_type_descs[type].scr_el3[security_state] = flag << bit_pos;
+	cm_write_scr_el3_bit(security_state, bit_pos, flag);
+}
+
+/*******************************************************************************
+ * This function validates the routing model specified in the 'flags' and
+ * updates internal data structures to reflect the new routing model. It also
+ * updates the copy of SCR_EL3 for each security state with the new routing
+ * model in the 'cpu_context' structure for this cpu.
+ ******************************************************************************/
+int32_t set_routing_model(uint32_t type, uint32_t flags)
+{
+	int32_t rc;
+
+	rc = validate_interrupt_type(type);
+	if (rc)
+		return rc;
+
+	rc = validate_routing_model(type, flags);
+	if (rc)
+		return rc;
+
+	/* Update the routing model in internal data structures */
+	intr_type_descs[type].flags = flags;
+	set_scr_el3_from_rm(type, flags, SECURE);
+	set_scr_el3_from_rm(type, flags, NON_SECURE);
+
+	return 0;
+}
+
+/*******************************************************************************
+ * This function registers a handler for the 'type' of interrupt specified. It
+ * also validates the routing model specified in the 'flags' for this type of
+ * interrupt.
+ ******************************************************************************/
+int32_t register_interrupt_type_handler(uint32_t type,
+					interrupt_type_handler_t handler,
+					uint32_t flags)
+{
+	int32_t rc;
+
+	/* Validate the 'handler' parameter */
+	if (!handler)
+		return -EINVAL;
+
+	/* Validate the 'flags' parameter */
+	if (flags & INTR_TYPE_FLAGS_MASK)
+		return -EINVAL;
+
+	/* Check if a handler has already been registered */
+	if (intr_type_descs[type].handler)
+		return -EALREADY;
+
+	rc = set_routing_model(type, flags);
+	if (rc)
+		return rc;
+
+	/* Save the handler */
+	intr_type_descs[type].handler = handler;
+
+	return 0;
+}
+
+/*******************************************************************************
+ * This function is called when an interrupt is generated and returns the
+ * handler for the interrupt type (if registered). It returns NULL if the
+ * interrupt type is not supported or its handler has not been registered.
+ ******************************************************************************/
+interrupt_type_handler_t get_interrupt_type_handler(uint32_t type)
+{
+	if (validate_interrupt_type(type))
+		return NULL;
+
+	return intr_type_descs[type].handler;
+}
+