diff --git a/plat/marvell/common/mss/mss_scp_bootloader.c b/plat/marvell/common/mss/mss_scp_bootloader.c
index 7e442c6..2f1c46f 100644
--- a/plat/marvell/common/mss/mss_scp_bootloader.c
+++ b/plat/marvell/common/mss/mss_scp_bootloader.c
@@ -42,6 +42,8 @@
 
 #define MSS_HANDSHAKE_TIMEOUT		50
 
+#define MG_CM3_SRAM_BASE(CP)		(MVEBU_CP_REGS_BASE(CP) + 0x100000)
+
 static int mss_check_image_ready(volatile struct mss_pm_ctrl_block *mss_pm_crtl)
 {
 	int timeout = MSS_HANDSHAKE_TIMEOUT;
@@ -59,6 +61,28 @@
 	return 0;
 }
 
+static int mg_image_load(uintptr_t src_addr, uint32_t size, uintptr_t mg_regs)
+{
+	if (size > MG_SRAM_SIZE) {
+		ERROR("image is too big to fit into MG CM3 memory\n");
+		return 1;
+	}
+
+	NOTICE("Loading MG image from address 0x%lx Size 0x%x to MG at 0x%lx\n",
+	       src_addr, size, mg_regs);
+
+	/* Copy image to MG CM3 SRAM */
+	memcpy((void *)mg_regs, (void *)src_addr, size);
+
+	/*
+	 * Don't release MG CM3 from reset - it will be done by next step
+	 * bootloader (e.g. U-Boot), when appriopriate device-tree setup (which
+	 * has enabeld 802.3. auto-neg) will be choosen.
+	 */
+
+	return 0;
+}
+
 static int mss_image_load(uint32_t src_addr, uint32_t size, uintptr_t mss_regs)
 {
 	uint32_t i, loop_num, timeout;
@@ -225,12 +249,15 @@
 		}
 		break;
 	case MG_CP0:
-		/* TODO: */
-		NOTICE("Load image to CP0 MG not supported\n");
-		break;
 	case MG_CP1:
-		/* TODO: */
-		NOTICE("Load image to CP1 MG not supported\n");
+		cp_index = cm3_type - MG_CP0;
+		NOTICE("Load image to CP%d MG\n", cp_index);
+		ret = mg_image_load(single_img, image_size,
+				    MG_CM3_SRAM_BASE(cp_index));
+		if (ret != 0) {
+			ERROR("SCP Image load failed\n");
+			return -1;
+		}
 		break;
 	default:
 		ERROR("SCP_BL2 wrong img format (cm3_type=%d)\n", cm3_type);