poplar: Add LOAD_IMAGE_V2 support
Signed-off-by: Victor Chong <victor.chong@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/plat/hisilicon/poplar/bl1_plat_setup.c b/plat/hisilicon/poplar/bl1_plat_setup.c
index 7d6f10c..3955113 100644
--- a/plat/hisilicon/poplar/bl1_plat_setup.c
+++ b/plat/hisilicon/poplar/bl1_plat_setup.c
@@ -38,23 +38,49 @@
return &bl1_tzram_layout;
}
+#if LOAD_IMAGE_V2
+/*******************************************************************************
+ * Function that takes a memory layout into which BL2 has been loaded and
+ * populates a new memory layout for BL2 that ensures that BL1's data sections
+ * resident in secure RAM are not visible to BL2.
+ ******************************************************************************/
+void bl1_init_bl2_mem_layout(const meminfo_t *bl1_mem_layout,
+ meminfo_t *bl2_mem_layout)
+{
+
+ assert(bl1_mem_layout != NULL);
+ assert(bl2_mem_layout != NULL);
+
+ /*
+ * Cannot use default weak implementation in bl1main.c because
+ * BL1 RW data is not at the top of bl1_mem_layout
+ */
+ bl2_mem_layout->total_base = BL2_BASE;
+ bl2_mem_layout->total_size = BL32_LIMIT - BL2_BASE;
+
+ flush_dcache_range((unsigned long)bl2_mem_layout, sizeof(meminfo_t));
+}
+#endif /* LOAD_IMAGE_V2 */
+
void bl1_early_platform_setup(void)
{
/* Initialize the console to provide early debug support */
console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
/* Allow BL1 to see the whole Trusted RAM */
- bl1_tzram_layout.total_base = BL_MEM_BASE;
- bl1_tzram_layout.total_size = BL_MEM_SIZE;
+ bl1_tzram_layout.total_base = BL1_RW_BASE;
+ bl1_tzram_layout.total_size = BL1_RW_SIZE;
+#if !LOAD_IMAGE_V2
/* Calculate how much RAM BL1 is using and how much remains free */
- bl1_tzram_layout.free_base = BL_MEM_BASE;
- bl1_tzram_layout.free_size = BL_MEM_SIZE;
+ bl1_tzram_layout.free_base = BL1_RW_BASE;
+ bl1_tzram_layout.free_size = BL1_RW_SIZE;
reserve_mem(&bl1_tzram_layout.free_base,
&bl1_tzram_layout.free_size,
BL1_RAM_BASE,
BL1_RAM_LIMIT - BL1_RAM_BASE);
+#endif
INFO("BL1: 0x%lx - 0x%lx [size = %zu]\n", BL1_RAM_BASE, BL1_RAM_LIMIT,
BL1_RAM_LIMIT - BL1_RAM_BASE);
@@ -64,7 +90,7 @@
{
plat_configure_mmu_el3(bl1_tzram_layout.total_base,
bl1_tzram_layout.total_size,
- BL_MEM_BASE, /* l-loader and BL1 ROM */
+ BL1_RO_BASE, /* l-loader and BL1 ROM */
BL1_RO_LIMIT,
BL1_COHERENT_RAM_BASE,
BL1_COHERENT_RAM_LIMIT);
diff --git a/plat/hisilicon/poplar/bl2_plat_mem_params_desc.c b/plat/hisilicon/poplar/bl2_plat_mem_params_desc.c
new file mode 100644
index 0000000..434f577
--- /dev/null
+++ b/plat/hisilicon/poplar/bl2_plat_mem_params_desc.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <bl_common.h>
+#include <desc_image_load.h>
+#include <platform.h>
+#include <platform_def.h>
+
+
+/*******************************************************************************
+ * Following descriptor provides BL image/ep information that gets used
+ * by BL2 to load the images and also subset of this information is
+ * passed to next BL image. The image loading sequence is managed by
+ * populating the images in required loading order. The image execution
+ * sequence is managed by populating the `next_handoff_image_id` with
+ * the next executable image id.
+ ******************************************************************************/
+static bl_mem_params_node_t bl2_mem_params_descs[] = {
+#ifdef SCP_BL2_BASE
+ /* Fill SCP_BL2 related information if it exists */
+ {
+ .image_id = SCP_BL2_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_IMAGE_BINARY,
+ VERSION_2, entry_point_info_t, SECURE | NON_EXECUTABLE),
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_IMAGE_BINARY,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = SCP_BL2_BASE,
+ .image_info.image_max_size = SCP_BL2_SIZE,
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
+#endif /* SCP_BL2_BASE */
+
+#ifdef EL3_PAYLOAD_BASE
+ /* Fill EL3 payload related information (BL31 is EL3 payload)*/
+ {
+ .image_id = BL31_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = EL3_PAYLOAD_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t,
+ IMAGE_ATTRIB_PLAT_SETUP | IMAGE_ATTRIB_SKIP_LOADING),
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
+
+#else /* EL3_PAYLOAD_BASE */
+
+ /* Fill BL31 related information */
+ {
+ .image_id = BL31_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = BL31_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
+#if DEBUG
+ .ep_info.args.arg1 = POPLAR_BL31_PLAT_PARAM_VAL,
+#endif
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = BL31_BASE,
+ .image_info.image_max_size = BL31_LIMIT - BL31_BASE,
+
+# ifdef BL32_BASE
+ .next_handoff_image_id = BL32_IMAGE_ID,
+# else
+ .next_handoff_image_id = BL33_IMAGE_ID,
+# endif
+ },
+
+# ifdef BL32_BASE
+ /* Fill BL32 related information */
+ {
+ .image_id = BL32_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+ .ep_info.pc = BL32_BASE,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = BL32_LIMIT - BL32_BASE,
+
+ .next_handoff_image_id = BL33_IMAGE_ID,
+ },
+# endif /* BL32_BASE */
+
+ /* Fill BL33 related information */
+ {
+ .image_id = BL33_IMAGE_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+# ifdef PRELOADED_BL33_BASE
+ .ep_info.pc = PRELOADED_BL33_BASE,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
+# else
+ .ep_info.pc = PLAT_POPLAR_NS_IMAGE_OFFSET,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = PLAT_POPLAR_NS_IMAGE_OFFSET,
+ .image_info.image_max_size = DDR_BASE + DDR_SIZE -
+ PLAT_POPLAR_NS_IMAGE_OFFSET,
+# endif /* PRELOADED_BL33_BASE */
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ }
+#endif /* EL3_PAYLOAD_BASE */
+};
+
+REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs)
diff --git a/plat/hisilicon/poplar/bl2_plat_setup.c b/plat/hisilicon/poplar/bl2_plat_setup.c
index 7edfab7..a338396 100644
--- a/plat/hisilicon/poplar/bl2_plat_setup.c
+++ b/plat/hisilicon/poplar/bl2_plat_setup.c
@@ -9,6 +9,7 @@
#include <bl_common.h>
#include <console.h>
#include <debug.h>
+#include <desc_image_load.h>
#include <dw_mmc.h>
#include <emmc.h>
#include <errno.h>
@@ -28,6 +29,15 @@
#define BL2_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
#define BL2_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
+static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+
+#if !LOAD_IMAGE_V2
+
+/*******************************************************************************
+ * This structure represents the superset of information that is passed to
+ * BL31, e.g. while passing control to it from BL2, bl31_params
+ * and other platform specific params
+ ******************************************************************************/
typedef struct bl2_to_bl31_params_mem {
bl31_params_t bl31_params;
image_info_t bl31_image_info;
@@ -38,13 +48,140 @@
entry_point_info_t bl31_ep_info;
} bl2_to_bl31_params_mem_t;
-static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
static bl2_to_bl31_params_mem_t bl31_params_mem;
meminfo_t *bl2_plat_sec_mem_layout(void)
{
return &bl2_tzram_layout;
}
+
+#ifdef SCP_BL2_BASE
+void bl2_plat_get_scp_bl2_meminfo(meminfo_t *scp_bl2_meminfo)
+{
+ /*
+ * This platform has no SCP_BL2 yet
+ */
+}
+#endif
+#endif /* LOAD_IMAGE_V2 */
+
+/*******************************************************************************
+ * Transfer SCP_BL2 from Trusted RAM using the SCP Download protocol.
+ * Return 0 on success, -1 otherwise.
+ ******************************************************************************/
+#if LOAD_IMAGE_V2
+int plat_poplar_bl2_handle_scp_bl2(image_info_t *scp_bl2_image_info)
+#else
+int bl2_plat_handle_scp_bl2(struct image_info *scp_bl2_image_info)
+#endif
+{
+ /*
+ * This platform has no SCP_BL2 yet
+ */
+ return 0;
+}
+
+/*******************************************************************************
+ * Gets SPSR for BL32 entry
+ ******************************************************************************/
+uint32_t poplar_get_spsr_for_bl32_entry(void)
+{
+ /*
+ * The Secure Payload Dispatcher service is responsible for
+ * setting the SPSR prior to entry into the BL3-2 image.
+ */
+ return 0;
+}
+
+/*******************************************************************************
+ * Gets SPSR for BL33 entry
+ ******************************************************************************/
+#ifndef AARCH32
+uint32_t poplar_get_spsr_for_bl33_entry(void)
+{
+ unsigned long el_status;
+ unsigned int mode;
+ uint32_t spsr;
+
+ /* Figure out what mode we enter the non-secure world in */
+ el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+ el_status &= ID_AA64PFR0_ELX_MASK;
+
+ mode = (el_status) ? MODE_EL2 : MODE_EL1;
+
+ /*
+ * TODO: Consider the possibility of specifying the SPSR in
+ * the FIP ToC and allowing the platform to have a say as
+ * well.
+ */
+ spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+ return spsr;
+}
+#else
+uint32_t poplar_get_spsr_for_bl33_entry(void)
+{
+ unsigned int hyp_status, mode, spsr;
+
+ hyp_status = GET_VIRT_EXT(read_id_pfr1());
+
+ mode = (hyp_status) ? MODE32_hyp : MODE32_svc;
+
+ /*
+ * TODO: Consider the possibility of specifying the SPSR in
+ * the FIP ToC and allowing the platform to have a say as
+ * well.
+ */
+ spsr = SPSR_MODE32(mode, plat_get_ns_image_entrypoint() & 0x1,
+ SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
+ return spsr;
+}
+#endif /* AARCH32 */
+
+#if LOAD_IMAGE_V2
+int poplar_bl2_handle_post_image_load(unsigned int image_id)
+{
+ int err = 0;
+ bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+
+ assert(bl_mem_params);
+
+ switch (image_id) {
+#ifdef AARCH64
+ case BL32_IMAGE_ID:
+ bl_mem_params->ep_info.spsr = poplar_get_spsr_for_bl32_entry();
+ break;
+#endif
+
+ case BL33_IMAGE_ID:
+ /* BL33 expects to receive the primary CPU MPID (through r0) */
+ bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
+ bl_mem_params->ep_info.spsr = poplar_get_spsr_for_bl33_entry();
+ break;
+
+#ifdef SCP_BL2_BASE
+ case SCP_BL2_IMAGE_ID:
+ /* The subsequent handling of SCP_BL2 is platform specific */
+ err = plat_poplar_bl2_handle_scp_bl2(&bl_mem_params->image_info);
+ if (err) {
+ WARN("Failure in platform-specific handling of SCP_BL2 image.\n");
+ }
+ break;
+#endif
+ }
+
+ return err;
+}
+
+/*******************************************************************************
+ * This function can be used by the platforms to update/use image
+ * information for given `image_id`.
+ ******************************************************************************/
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+ return poplar_bl2_handle_post_image_load(image_id);
+}
+
+#else /* LOAD_IMAGE_V2 */
bl31_params_t *bl2_plat_get_bl31_params(void)
{
@@ -92,6 +229,10 @@
struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
{
+#if DEBUG
+ bl31_params_mem.bl31_ep_info.args.arg1 = POPLAR_BL31_PLAT_PARAM_VAL;
+#endif
+
return &bl31_params_mem.bl31_ep_info;
}
@@ -138,32 +279,11 @@
}
#endif /* BL32_BASE */
-static uint32_t hisi_get_spsr_for_bl33_entry(void)
-{
- unsigned long el_status;
- unsigned int mode;
- uint32_t spsr;
-
- /* Figure out what mode we enter the non-secure world in */
- el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
- el_status &= ID_AA64PFR0_ELX_MASK;
-
- mode = (el_status) ? MODE_EL2 : MODE_EL1;
-
- /*
- * TODO: Consider the possibility of specifying the SPSR in
- * the FIP ToC and allowing the platform to have a say as
- * well.
- */
- spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
- return spsr;
-}
-
void bl2_plat_set_bl33_ep_info(image_info_t *image,
entry_point_info_t *bl33_ep_info)
{
SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
- bl33_ep_info->spsr = hisi_get_spsr_for_bl33_entry();
+ bl33_ep_info->spsr = poplar_get_spsr_for_bl33_entry();
bl33_ep_info->args.arg2 = image->image_size;
}
@@ -180,6 +300,7 @@
bl33_meminfo->free_base = DDR_BASE;
bl33_meminfo->free_size = DDR_SIZE;
}
+#endif /* LOAD_IMAGE_V2 */
void bl2_early_platform_setup(meminfo_t *mem_layout)
{
@@ -217,7 +338,11 @@
{
}
-unsigned long plat_get_ns_image_entrypoint(void)
+uintptr_t plat_get_ns_image_entrypoint(void)
{
+#ifdef PRELOADED_BL33_BASE
+ return PRELOADED_BL33_BASE;
+#else
return PLAT_POPLAR_NS_IMAGE_OFFSET;
+#endif
}
diff --git a/plat/hisilicon/poplar/bl31_plat_setup.c b/plat/hisilicon/poplar/bl31_plat_setup.c
index e3a5c50..ec72acd 100644
--- a/plat/hisilicon/poplar/bl31_plat_setup.c
+++ b/plat/hisilicon/poplar/bl31_plat_setup.c
@@ -59,14 +59,64 @@
return NULL;
}
+/*******************************************************************************
+ * Perform any BL31 early platform setup common to ARM standard platforms.
+ * Here is an opportunity to copy parameters passed by the calling EL (S-EL1
+ * in BL2 & S-EL3 in BL1) before they are lost (potentially). This needs to be
+ * done before the MMU is initialized so that the memory layout can be used
+ * while creating page tables. BL2 has flushed this information to memory, so
+ * we are guaranteed to pick up good data.
+ ******************************************************************************/
+#if LOAD_IMAGE_V2
+void bl31_early_platform_setup(void *from_bl2,
+ void *plat_params_from_bl2)
+#else
void bl31_early_platform_setup(bl31_params_t *from_bl2,
void *plat_params_from_bl2)
+#endif
{
console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
/* Init console for crash report */
plat_crash_console_init();
+#if LOAD_IMAGE_V2
+ /*
+ * Check params passed from BL2 should not be NULL,
+ */
+ bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
+
+ assert(params_from_bl2 != NULL);
+ assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
+ assert(params_from_bl2->h.version >= VERSION_2);
+
+ bl_params_node_t *bl_params = params_from_bl2->head;
+
+ /*
+ * Copy BL33 and BL32 (if present), entry point information.
+ * They are stored in Secure RAM, in BL2's address space.
+ */
+ while (bl_params) {
+ if (bl_params->image_id == BL32_IMAGE_ID)
+ bl32_image_ep_info = *bl_params->ep_info;
+
+ if (bl_params->image_id == BL33_IMAGE_ID)
+ bl33_image_ep_info = *bl_params->ep_info;
+
+ bl_params = bl_params->next_params_info;
+ }
+
+ if (bl33_image_ep_info.pc == 0)
+ panic();
+
+#else /* LOAD_IMAGE_V2 */
+
+ /*
+ * Check params passed from BL2 should not be NULL,
+ */
+ assert(params_from_bl2 != NULL);
+ assert(params_from_bl2->h.type == PARAM_BL31);
+ assert(params_from_bl2->h.version >= VERSION_1);
/*
* Copy BL32 (if populated by BL2) and BL33 entry point information.
@@ -75,6 +125,7 @@
if (from_bl2->bl32_ep_info)
bl32_image_ep_info = *from_bl2->bl32_ep_info;
bl33_image_ep_info = *from_bl2->bl33_ep_info;
+#endif /* LOAD_IMAGE_V2 */
}
void bl31_platform_setup(void)
@@ -97,8 +148,8 @@
void bl31_plat_arch_setup(void)
{
- plat_configure_mmu_el3(BL31_RO_BASE,
- (BL31_COHERENT_RAM_LIMIT - BL31_RO_BASE),
+ plat_configure_mmu_el3(BL31_BASE,
+ (BL31_LIMIT - BL31_BASE),
BL31_RO_BASE,
BL31_RO_LIMIT,
BL31_COHERENT_RAM_BASE,
diff --git a/plat/hisilicon/poplar/include/platform_def.h b/plat/hisilicon/poplar/include/platform_def.h
index 941a84b..f626809 100644
--- a/plat/hisilicon/poplar/include/platform_def.h
+++ b/plat/hisilicon/poplar/include/platform_def.h
@@ -16,6 +16,9 @@
#include "hi3798cv200.h"
#include "poplar_layout.h" /* BL memory region sizes, etc */
+/* Special value used to verify platform parameters from BL2 to BL3-1 */
+#define POPLAR_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL
+
#define PLATFORM_LINKER_FORMAT "elf64-littleaarch64"
#define PLATFORM_LINKER_ARCH aarch64
@@ -75,10 +78,6 @@
#define DDR_SEC_SIZE 0x01000000
#define DDR_SEC_BASE 0x03000000
-#define BL_MEM_BASE (BL1_RO_BASE)
-#define BL_MEM_LIMIT (BL31_LIMIT)
-#define BL_MEM_SIZE (BL_MEM_LIMIT - BL_MEM_BASE)
-
/*
* BL3-2 specific defines.
*/
diff --git a/plat/hisilicon/poplar/include/poplar_layout.h b/plat/hisilicon/poplar/include/poplar_layout.h
index 9ce0434..9fb5a94 100644
--- a/plat/hisilicon/poplar/include/poplar_layout.h
+++ b/plat/hisilicon/poplar/include/poplar_layout.h
@@ -88,7 +88,7 @@
#define BL1_RO_SIZE 0x00008000 /* page multiple */
#define BL1_RW_SIZE 0x00008000 /* page multiple */
#define BL1_SIZE (BL1_RO_SIZE + BL1_RW_SIZE)
-#define BL2_SIZE 0x0000c000 /* page multiple */
+#define BL2_SIZE 0x0000d000 /* page multiple */
#define BL31_SIZE 0x00014000
#if !POPLAR_RECOVERY
/*
diff --git a/plat/hisilicon/poplar/platform.mk b/plat/hisilicon/poplar/platform.mk
index fca0622..6616ac7 100644
--- a/plat/hisilicon/poplar/platform.mk
+++ b/plat/hisilicon/poplar/platform.mk
@@ -4,6 +4,9 @@
# SPDX-License-Identifier: BSD-3-Clause
#
+# Enable version2 of image loading
+LOAD_IMAGE_V2 := 1
+
# On Poplar, the TSP can execute from TZC secure area in DRAM.
POPLAR_TSP_RAM_LOCATION := dram
ifeq (${POPLAR_TSP_RAM_LOCATION}, dram)
@@ -80,7 +83,6 @@
plat/hisilicon/poplar/bl1_plat_setup.c \
plat/hisilicon/poplar/plat_storage.c
-
BL2_SOURCES += \
drivers/arm/pl061/pl061_gpio.c \
drivers/emmc/emmc.c \
@@ -93,6 +95,12 @@
plat/hisilicon/poplar/bl2_plat_setup.c \
plat/hisilicon/poplar/plat_storage.c
+ifeq (${LOAD_IMAGE_V2},1)
+BL2_SOURCES += \
+ plat/hisilicon/poplar/bl2_plat_mem_params_desc.c \
+ plat/hisilicon/poplar/poplar_image_load.c \
+ common/desc_image_load.c
+endif
BL31_SOURCES += \
lib/cpus/aarch64/aem_generic.S \
diff --git a/plat/hisilicon/poplar/poplar_image_load.c b/plat/hisilicon/poplar/poplar_image_load.c
new file mode 100644
index 0000000..32ca36d
--- /dev/null
+++ b/plat/hisilicon/poplar/poplar_image_load.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <bl_common.h>
+#include <desc_image_load.h>
+#include <platform.h>
+
+/*******************************************************************************
+ * This function flushes the data structures so that they are visible
+ * in memory for the next BL image.
+ ******************************************************************************/
+void plat_flush_next_bl_params(void)
+{
+ flush_bl_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of loadable images.
+ ******************************************************************************/
+bl_load_info_t *plat_get_bl_image_load_info(void)
+{
+ return get_bl_load_info_from_mem_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of executable images.
+ ******************************************************************************/
+bl_params_t *plat_get_next_bl_params(void)
+{
+ return get_next_bl_params_from_mem_params_desc();
+}