diff --git a/plat/arm/board/fvp/aarch64/fvp_helpers.S b/plat/arm/board/fvp/aarch64/fvp_helpers.S
index 2c24e61..338d158 100644
--- a/plat/arm/board/fvp/aarch64/fvp_helpers.S
+++ b/plat/arm/board/fvp/aarch64/fvp_helpers.S
@@ -30,7 +30,8 @@
 
 #include <arch.h>
 #include <asm_macros.S>
-#include <gic_v2.h>
+#include <gicv2.h>
+#include <gicv3.h>
 #include <platform_def.h>
 #include <v2m_def.h>
 #include "../drivers/pwrc/fvp_pwrc.h"
@@ -74,9 +75,26 @@
 	str	w0, [x1, #PPOFFR_OFF]
 
 	/* ---------------------------------------------
-	 * Deactivate the gic cpu interface as well
+	 * Disable GIC bypass as well
 	 * ---------------------------------------------
 	 */
+	/* Check for GICv3 system register access */
+	mrs	x0, id_aa64pfr0_el1
+	ubfx	x0, x0, #ID_AA64PFR0_GIC_SHIFT, #ID_AA64PFR0_GIC_WIDTH
+	cmp	x0, #1
+	b.ne	gicv2_bypass_disable
+
+	/* Check for SRE enable */
+	mrs	x1, ICC_SRE_EL3
+	tst	x1, #ICC_SRE_SRE_BIT
+	b.eq	gicv2_bypass_disable
+
+	mrs	x2, ICC_SRE_EL3
+	orr	x2, x2, #(ICC_SRE_DIB_BIT | ICC_SRE_DFB_BIT)
+	msr	ICC_SRE_EL3, x2
+	b	secondary_cold_boot_wait
+
+gicv2_bypass_disable:
 	ldr	x0, =VE_GICC_BASE
 	ldr	x1, =BASE_GICC_BASE
 	fvp_choose_gicmmap	x0, x1, x2, w2, x1
@@ -84,6 +102,7 @@
 	orr	w0, w0, #(IRQ_BYP_DIS_GRP0 | FIQ_BYP_DIS_GRP0)
 	str	w0, [x1, #GICC_CTLR]
 
+secondary_cold_boot_wait:
 	/* ---------------------------------------------
 	 * There is no sane reason to come out of this
 	 * wfi so panic if we do. This cpu will be pow-
diff --git a/plat/arm/board/fvp/fvp_pm.c b/plat/arm/board/fvp/fvp_pm.c
index 21ad14f..d7b459d 100644
--- a/plat/arm/board/fvp/fvp_pm.c
+++ b/plat/arm/board/fvp/fvp_pm.c
@@ -93,6 +93,42 @@
 	fvp_pwrc_write_pcoffr(mpidr);
 }
 
+static void fvp_power_domain_on_finish_common(const psci_power_state_t *target_state)
+{
+	unsigned long mpidr;
+
+	assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
+					ARM_LOCAL_STATE_OFF);
+
+	/* Get the mpidr for this cpu */
+	mpidr = read_mpidr_el1();
+
+	/* Perform the common cluster specific operations */
+	if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
+					ARM_LOCAL_STATE_OFF) {
+		/*
+		 * This CPU might have woken up whilst the cluster was
+		 * attempting to power down. In this case the FVP power
+		 * controller will have a pending cluster power off request
+		 * which needs to be cleared by writing to the PPONR register.
+		 * This prevents the power controller from interpreting a
+		 * subsequent entry of this cpu into a simple wfi as a power
+		 * down request.
+		 */
+		fvp_pwrc_write_pponr(mpidr);
+
+		/* Enable coherency if this cluster was off */
+		fvp_cci_enable();
+	}
+
+	/*
+	 * Clear PWKUPR.WEN bit to ensure interrupts do not interfere
+	 * with a cpu power down unless the bit is set again
+	 */
+	fvp_pwrc_clr_wen(mpidr);
+}
+
+
 /*******************************************************************************
  * FVP handler called when a CPU is about to enter standby.
  ******************************************************************************/
@@ -196,42 +232,11 @@
  ******************************************************************************/
 void fvp_pwr_domain_on_finish(const psci_power_state_t *target_state)
 {
-	unsigned long mpidr;
-
-	assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
-					ARM_LOCAL_STATE_OFF);
-
-	/* Get the mpidr for this cpu */
-	mpidr = read_mpidr_el1();
-
-	/* Perform the common cluster specific operations */
-	if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
-					ARM_LOCAL_STATE_OFF) {
-		/*
-		 * This CPU might have woken up whilst the cluster was
-		 * attempting to power down. In this case the FVP power
-		 * controller will have a pending cluster power off request
-		 * which needs to be cleared by writing to the PPONR register.
-		 * This prevents the power controller from interpreting a
-		 * subsequent entry of this cpu into a simple wfi as a power
-		 * down request.
-		 */
-		fvp_pwrc_write_pponr(mpidr);
-
-		/* Enable coherency if this cluster was off */
-		fvp_cci_enable();
-	}
-
-	/*
-	 * Clear PWKUPR.WEN bit to ensure interrupts do not interfere
-	 * with a cpu power down unless the bit is set again
-	 */
-	fvp_pwrc_clr_wen(mpidr);
+	fvp_power_domain_on_finish_common(target_state);
 
 	/* Enable the gic cpu interface */
 	arm_gic_cpuif_setup();
-
-	/* TODO: This setup is needed only after a cold boot */
+	/* Program the gic per-cpu distributor interface */
 	arm_gic_pcpu_distif_setup();
 }
 
@@ -251,7 +256,10 @@
 					ARM_LOCAL_STATE_RET)
 		return;
 
+	fvp_power_domain_on_finish_common(target_state);
+
-	fvp_pwr_domain_on_finish(target_state);
+	/* Enable the gic cpu interface */
+	arm_gic_cpuif_setup();
 }
 
 /*******************************************************************************
diff --git a/plat/arm/board/fvp/include/plat_macros.S b/plat/arm/board/fvp/include/plat_macros.S
index 2feffbe..2ed0d85 100644
--- a/plat/arm/board/fvp/include/plat_macros.S
+++ b/plat/arm/board/fvp/include/plat_macros.S
@@ -53,16 +53,14 @@
 	/* Check if VE mmap */
 	cmp	w16, #BLD_GIC_VE_MMAP
 	b.eq	use_ve_mmap
-	/* Check if Cortex-A53/A57 mmap */
-	cmp	w16, #BLD_GIC_A53A57_MMAP
-	b.ne	exit_print_gic_regs
+	/* Assume Base Cortex mmap */
 	mov_imm	x17, BASE_GICC_BASE
 	mov_imm	x16, BASE_GICD_BASE
-	b	print_gicc_regs
+	b	print_gic_regs
 use_ve_mmap:
 	mov_imm	x17, VE_GICC_BASE
 	mov_imm	x16, VE_GICD_BASE
-print_gicc_regs:
+print_gic_regs:
 	arm_print_gic_regs
 	.endm
 
diff --git a/plat/arm/css/common/css_pm.c b/plat/arm/css/common/css_pm.c
index 3f46857..1d9bd59 100644
--- a/plat/arm/css/common/css_pm.c
+++ b/plat/arm/css/common/css_pm.c
@@ -41,6 +41,12 @@
 #include <platform_def.h>
 #include "css_scpi.h"
 
+/* Macros to read the CSS power domain state */
+#define CSS_CORE_PWR_STATE(state)	(state)->pwr_domain_state[ARM_PWR_LVL0]
+#define CSS_CLUSTER_PWR_STATE(state)	(state)->pwr_domain_state[ARM_PWR_LVL1]
+#define CSS_SYSTEM_PWR_STATE(state)	((PLAT_MAX_PWR_LVL > ARM_PWR_LVL1) ?\
+				(state)->pwr_domain_state[ARM_PWR_LVL2] : 0)
+
 /* Allow CSS platforms to override `plat_arm_psci_pm_ops` */
 #pragma weak plat_arm_psci_pm_ops
 
@@ -93,50 +99,37 @@
 	return PSCI_E_SUCCESS;
 }
 
-/*******************************************************************************
- * Handler called when a power level has just been powered on after
- * being turned off earlier. The target_state encodes the low power state that
- * each level has woken up from.
- ******************************************************************************/
-void css_pwr_domain_on_finish(const psci_power_state_t *target_state)
+static void css_pwr_domain_on_finisher_common(
+		const psci_power_state_t *target_state)
 {
-	assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
-						ARM_LOCAL_STATE_OFF);
-
-	if (PLAT_MAX_PWR_LVL > ARM_PWR_LVL1) {
-		/*
-		 * Perform system initialization if woken up from system
-		 * suspend.
-		 */
-		if (target_state->pwr_domain_state[ARM_PWR_LVL2] ==
-							ARM_LOCAL_STATE_OFF)
-			arm_system_pwr_domain_resume();
-	}
+	assert(CSS_CORE_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF);
 
 	/*
 	 * Perform the common cluster specific operations i.e enable coherency
 	 * if this cluster was off.
 	 */
-	if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
-						ARM_LOCAL_STATE_OFF)
+	if (CSS_CLUSTER_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF)
 		cci_enable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr_el1()));
+}
 
+/*******************************************************************************
+ * Handler called when a power level has just been powered on after
+ * being turned off earlier. The target_state encodes the low power state that
+ * each level has woken up from. This handler would never be invoked with
+ * the system power domain uninitialized as either the primary would have taken
+ * care of it as part of cold boot or the first core awakened from system
+ * suspend would have already initialized it.
+ ******************************************************************************/
+void css_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	/* Assert that the system power domain need not be initialized */
+	assert(CSS_SYSTEM_PWR_STATE(target_state) == ARM_LOCAL_STATE_RUN);
 
-	if (PLAT_MAX_PWR_LVL > ARM_PWR_LVL1) {
-		/*
-		 * Skip GIC CPU interface and per-CPU Distributor interface
-		 * setups if woken up from system suspend as it is done as
-		 * part of css_system_pwr_domain_resume().
-		 */
-		if (target_state->pwr_domain_state[ARM_PWR_LVL2] ==
-							ARM_LOCAL_STATE_OFF)
-			return;
-	}
+	css_pwr_domain_on_finisher_common(target_state);
 
 	/* Enable the gic cpu interface */
 	arm_gic_cpuif_setup();
-
-	/* todo: Is this setup only needed after a cold boot? */
+	/* Program the gic per-cpu distributor interface */
 	arm_gic_pcpu_distif_setup();
 }
 
@@ -154,19 +147,12 @@
 	/* Prevent interrupts from spuriously waking up this cpu */
 	arm_gic_cpuif_deactivate();
 
-	if (PLAT_MAX_PWR_LVL > ARM_PWR_LVL1) {
-		/*
-		 * Check if power down at system power domain level is
-		 * requested.
-		 */
-		if (target_state->pwr_domain_state[ARM_PWR_LVL2] ==
-							ARM_LOCAL_STATE_OFF)
+	/* Check if power down at system power domain level is requested */
+	if (CSS_SYSTEM_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF)
 			system_state = scpi_power_retention;
-	}
 
 	/* Cluster is to be turned off, so disable coherency */
-	if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
-						ARM_LOCAL_STATE_OFF) {
+	if (CSS_CLUSTER_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF) {
 		cci_disable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr()));
 		cluster_state = scpi_power_off;
 	}
@@ -187,9 +173,7 @@
  ******************************************************************************/
 void css_pwr_domain_off(const psci_power_state_t *target_state)
 {
-	assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
-						ARM_LOCAL_STATE_OFF);
-
+	assert(CSS_CORE_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF);
 	css_power_down_common(target_state);
 }
 
@@ -200,16 +184,13 @@
 void css_pwr_domain_suspend(const psci_power_state_t *target_state)
 {
 	/*
-	 * Juno has retention only at cpu level. Just return
+	 * CSS currently supports retention only at cpu level. Just return
 	 * as nothing is to be done for retention.
 	 */
-	if (target_state->pwr_domain_state[ARM_PWR_LVL0] ==
-						ARM_LOCAL_STATE_RET)
+	if (CSS_CORE_PWR_STATE(target_state) == ARM_LOCAL_STATE_RET)
 		return;
 
-	assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
-						ARM_LOCAL_STATE_OFF);
-
+	assert(CSS_CORE_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF);
 	css_power_down_common(target_state);
 }
 
@@ -223,14 +204,18 @@
 void css_pwr_domain_suspend_finish(
 				const psci_power_state_t *target_state)
 {
-	/*
-	 * Return as nothing is to be done on waking up from retention.
-	 */
-	if (target_state->pwr_domain_state[ARM_PWR_LVL0] ==
-						ARM_LOCAL_STATE_RET)
+	/* Return as nothing is to be done on waking up from retention. */
+	if (CSS_CORE_PWR_STATE(target_state) == ARM_LOCAL_STATE_RET)
 		return;
 
-	css_pwr_domain_on_finish(target_state);
+	/* Perform system domain restore if woken up from system suspend */
+	if (CSS_SYSTEM_PWR_STATE(target_state) == ARM_LOCAL_STATE_OFF)
+		arm_system_pwr_domain_resume();
+	else
+		/* Enable the gic cpu interface */
+		arm_gic_cpuif_setup();
+
+	css_pwr_domain_on_finisher_common(target_state);
 }
 
 /*******************************************************************************
diff --git a/plat/common/plat_gicv2.c b/plat/common/plat_gicv2.c
new file mode 100644
index 0000000..65f89dc
--- /dev/null
+++ b/plat/common/plat_gicv2.c
@@ -0,0 +1,148 @@
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <assert.h>
+#include <gic_common.h>
+#include <gicv2.h>
+#include <interrupt_mgmt.h>
+
+/*
+ * The following platform GIC functions are weakly defined. They
+ * provide typical implementations that may be re-used by multiple
+ * platforms but may also be overridden by a platform if required.
+ */
+#pragma weak plat_ic_get_pending_interrupt_id
+#pragma weak plat_ic_get_pending_interrupt_type
+#pragma weak plat_ic_acknowledge_interrupt
+#pragma weak plat_ic_get_interrupt_type
+#pragma weak plat_ic_end_of_interrupt
+#pragma weak plat_interrupt_type_to_line
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller
+ */
+uint32_t plat_ic_get_pending_interrupt_id(void)
+{
+	unsigned int id;
+
+	id = gicv2_get_pending_interrupt_id();
+	if (id == GIC_SPURIOUS_INTERRUPT)
+		return INTR_ID_UNAVAILABLE;
+
+	return id;
+}
+
+/*
+ * This function returns the type of the highest priority pending interrupt
+ * at the Interrupt controller. In the case of GICv2, the Highest Priority
+ * Pending interrupt register (`GICC_HPPIR`) is read to determine the id of
+ * the pending interrupt. The type of interrupt depends upon the id value
+ * as follows.
+ *   1. id < PENDING_G1_INTID (1022) is reported as a S-EL1 interrupt
+ *   2. id = PENDING_G1_INTID (1022) is reported as a Non-secure interrupt.
+ *   3. id = GIC_SPURIOUS_INTERRUPT (1023) is reported as an invalid interrupt
+ *           type.
+ */
+uint32_t plat_ic_get_pending_interrupt_type(void)
+{
+	unsigned int id;
+
+	id = gicv2_get_pending_interrupt_type();
+
+	/* Assume that all secure interrupts are S-EL1 interrupts */
+	if (id < PENDING_G1_INTID)
+		return INTR_TYPE_S_EL1;
+
+	if (id == GIC_SPURIOUS_INTERRUPT)
+		return INTR_TYPE_INVAL;
+
+	return INTR_TYPE_NS;
+}
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller and indicates to the Interrupt controller
+ * that the interrupt processing has started.
+ */
+uint32_t plat_ic_acknowledge_interrupt(void)
+{
+	return gicv2_acknowledge_interrupt();
+}
+
+/*
+ * This function returns the type of the interrupt `id`, depending on how
+ * the interrupt has been configured in the interrupt controller
+ */
+uint32_t plat_ic_get_interrupt_type(uint32_t id)
+{
+	unsigned int type;
+
+	type = gicv2_get_interrupt_group(id);
+
+	/* Assume that all secure interrupts are S-EL1 interrupts */
+	return (type) ? INTR_TYPE_NS : INTR_TYPE_S_EL1;
+}
+
+/*
+ * This functions is used to indicate to the interrupt controller that
+ * the processing of the interrupt corresponding to the `id` has
+ * finished.
+ */
+void plat_ic_end_of_interrupt(uint32_t id)
+{
+	gicv2_end_of_interrupt(id);
+}
+
+/*
+ * An ARM processor signals interrupt exceptions through the IRQ and FIQ pins.
+ * The interrupt controller knows which pin/line it uses to signal a type of
+ * interrupt. It lets the interrupt management framework determine
+ * for a type of interrupt and security state, which line should be used in the
+ * SCR_EL3 to control its routing to EL3. The interrupt line is represented
+ * as the bit position of the IRQ or FIQ bit in the SCR_EL3.
+ */
+uint32_t plat_interrupt_type_to_line(uint32_t type,
+				uint32_t security_state)
+{
+	assert(type == INTR_TYPE_S_EL1 ||
+		       type == INTR_TYPE_EL3 ||
+		       type == INTR_TYPE_NS);
+
+	/* Non-secure interrupts are signaled on the IRQ line always */
+	if (type == INTR_TYPE_NS)
+		return __builtin_ctz(SCR_IRQ_BIT);
+
+	/*
+	 * Secure interrupts are signaled using the IRQ line if the FIQ is
+	 * not enabled else they are signaled using the FIQ line.
+	 */
+	return ((gicv2_is_fiq_enabled()) ? __builtin_ctz(SCR_FIQ_BIT) :
+						__builtin_ctz(SCR_IRQ_BIT));
+}
diff --git a/plat/common/plat_gicv3.c b/plat/common/plat_gicv3.c
new file mode 100644
index 0000000..249caf8
--- /dev/null
+++ b/plat/common/plat_gicv3.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <cassert.h>
+#include <gic_common.h>
+#include <gicv3.h>
+#include <interrupt_mgmt.h>
+#include <platform.h>
+
+#if IMAGE_BL31
+
+/*
+ * The following platform GIC functions are weakly defined. They
+ * provide typical implementations that may be re-used by multiple
+ * platforms but may also be overridden by a platform if required.
+ */
+#pragma weak plat_ic_get_pending_interrupt_id
+#pragma weak plat_ic_get_pending_interrupt_type
+#pragma weak plat_ic_acknowledge_interrupt
+#pragma weak plat_ic_get_interrupt_type
+#pragma weak plat_ic_end_of_interrupt
+#pragma weak plat_interrupt_type_to_line
+
+CASSERT((INTR_TYPE_S_EL1 == INTR_GROUP1S) &&
+	(INTR_TYPE_NS == INTR_GROUP1NS) &&
+	(INTR_TYPE_EL3 == INTR_GROUP0), assert_interrupt_type_mismatch);
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller
+ */
+uint32_t plat_ic_get_pending_interrupt_id(void)
+{
+	unsigned int irqnr;
+
+	assert(IS_IN_EL3());
+	irqnr = gicv3_get_pending_interrupt_id();
+	return (gicv3_is_intr_id_special_identifier(irqnr)) ?
+				INTR_ID_UNAVAILABLE : irqnr;
+}
+
+/*
+ * This function returns the type of the highest priority pending interrupt
+ * at the Interrupt controller. In the case of GICv3, the Highest Priority
+ * Pending interrupt system register (`ICC_HPPIR0_EL1`) is read to determine
+ * the id of the pending interrupt. The type of interrupt depends upon the
+ * id value as follows.
+ *   1. id = PENDING_G1S_INTID (1020) is reported as a S-EL1 interrupt
+ *   2. id = PENDING_G1NS_INTID (1021) is reported as a Non-secure interrupt.
+ *   3. id = GIC_SPURIOUS_INTERRUPT (1023) is reported as an invalid interrupt
+ *           type.
+ *   4. All other interrupt id's are reported as EL3 interrupt.
+ */
+uint32_t plat_ic_get_pending_interrupt_type(void)
+{
+	unsigned int irqnr;
+
+	assert(IS_IN_EL3());
+	irqnr = gicv3_get_pending_interrupt_type();
+
+	switch (irqnr) {
+	case PENDING_G1S_INTID:
+		return INTR_TYPE_S_EL1;
+	case PENDING_G1NS_INTID:
+		return INTR_TYPE_NS;
+	case GIC_SPURIOUS_INTERRUPT:
+		return INTR_TYPE_INVAL;
+	default:
+		return INTR_TYPE_EL3;
+	}
+}
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller and indicates to the Interrupt controller
+ * that the interrupt processing has started.
+ */
+uint32_t plat_ic_acknowledge_interrupt(void)
+{
+	assert(IS_IN_EL3());
+	return gicv3_acknowledge_interrupt();
+}
+
+/*
+ * This function returns the type of the interrupt `id`, depending on how
+ * the interrupt has been configured in the interrupt controller
+ */
+uint32_t plat_ic_get_interrupt_type(uint32_t id)
+{
+	assert(IS_IN_EL3());
+	return gicv3_get_interrupt_type(id, plat_my_core_pos());
+}
+
+/*
+ * This functions is used to indicate to the interrupt controller that
+ * the processing of the interrupt corresponding to the `id` has
+ * finished.
+ */
+void plat_ic_end_of_interrupt(uint32_t id)
+{
+	assert(IS_IN_EL3());
+	gicv3_end_of_interrupt(id);
+}
+
+/*
+ * An ARM processor signals interrupt exceptions through the IRQ and FIQ pins.
+ * The interrupt controller knows which pin/line it uses to signal a type of
+ * interrupt. It lets the interrupt management framework determine for a type of
+ * interrupt and security state, which line should be used in the SCR_EL3 to
+ * control its routing to EL3. The interrupt line is represented as the bit
+ * position of the IRQ or FIQ bit in the SCR_EL3.
+ */
+uint32_t plat_interrupt_type_to_line(uint32_t type,
+				uint32_t security_state)
+{
+	assert(type == INTR_TYPE_S_EL1 ||
+	       type == INTR_TYPE_EL3 ||
+	       type == INTR_TYPE_NS);
+
+	assert(sec_state_is_valid(security_state));
+	assert(IS_IN_EL3());
+
+	switch (type) {
+	case INTR_TYPE_S_EL1:
+		/*
+		 * The S-EL1 interrupts are signaled as IRQ in S-EL0/1 contexts
+		 * and as FIQ in the NS-EL0/1/2 contexts
+		 */
+		if (security_state == SECURE)
+			return __builtin_ctz(SCR_IRQ_BIT);
+		else
+			return __builtin_ctz(SCR_FIQ_BIT);
+	case INTR_TYPE_NS:
+		/*
+		 * The Non secure interrupts will be signaled as FIQ in S-EL0/1
+		 * contexts and as IRQ in the NS-EL0/1/2 contexts.
+		 */
+		if (security_state == SECURE)
+			return __builtin_ctz(SCR_FIQ_BIT);
+		else
+			return __builtin_ctz(SCR_IRQ_BIT);
+	default:
+		assert(0);
+		/* Fall through in the release build */
+	case INTR_TYPE_EL3:
+		/*
+		 * The EL3 interrupts are signaled as FIQ in both S-EL0/1 and
+		 * NS-EL0/1/2 contexts
+		 */
+		return __builtin_ctz(SCR_FIQ_BIT);
+	}
+}
+#endif
+#if IMAGE_BL32
+
+#pragma weak plat_ic_get_pending_interrupt_id
+#pragma weak plat_ic_acknowledge_interrupt
+#pragma weak plat_ic_end_of_interrupt
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller
+ */
+uint32_t plat_ic_get_pending_interrupt_id(void)
+{
+	unsigned int irqnr;
+
+	assert(IS_IN_EL1());
+	irqnr = gicv3_get_pending_interrupt_id_sel1();
+	return (irqnr == GIC_SPURIOUS_INTERRUPT) ?
+				INTR_ID_UNAVAILABLE : irqnr;
+}
+
+/*
+ * This function returns the highest priority pending interrupt at
+ * the Interrupt controller and indicates to the Interrupt controller
+ * that the interrupt processing has started.
+ */
+uint32_t plat_ic_acknowledge_interrupt(void)
+{
+	assert(IS_IN_EL1());
+	return gicv3_acknowledge_interrupt_sel1();
+}
+
+/*
+ * This functions is used to indicate to the interrupt controller that
+ * the processing of the interrupt corresponding to the `id` has
+ * finished.
+ */
+void plat_ic_end_of_interrupt(uint32_t id)
+{
+	assert(IS_IN_EL1());
+	gicv3_end_of_interrupt_sel1(id);
+}
+#endif