Prepare platforms to use refactored ARM GIC drivers
This patch adds platform helpers for the new GICv2 and GICv3 drivers in
plat_gicv2.c and plat_gicv3.c. The platforms can include the appropriate
file in their build according to the GIC driver to be used. The existing
plat_gic.c is only meant for the legacy GIC driver.
In the case of ARM platforms, the major changes are as follows:
1. The crash reporting helper macro `arm_print_gic_regs` that prints the GIC CPU
interface register values has been modified to detect the type of CPU
interface being used (System register or memory mappped interface) before
using the right interface to print the registers.
2. The power management helper function that is called after a core is powered
up has been further refactored. This is to highlight that the per-cpu
distributor interface should be initialised only when the core was originally
powered down using the CPU_OFF PSCI API and not when the CPU_SUSPEND PSCI API
was used.
3. In the case of CSS platforms, the system power domain restore helper
`arm_system_pwr_domain_resume()` is now only invoked in the `suspend_finish`
handler as the system power domain is always expected to be initialized when
the `on_finish` handler is invoked.
Change-Id: I7fc27d61fc6c2a60cea2436b676c5737d0257df6
diff --git a/include/plat/arm/common/aarch64/arm_macros.S b/include/plat/arm/common/aarch64/arm_macros.S
index 594b096..eaaa62f 100644
--- a/include/plat/arm/common/aarch64/arm_macros.S
+++ b/include/plat/arm/common/aarch64/arm_macros.S
@@ -31,12 +31,21 @@
#define __ARM_MACROS_S__
#include <cci.h>
-#include <gic_v2.h>
+#include <gic_common.h>
+#include <gicv2.h>
+#include <gicv3.h>
#include <platform_def.h>
.section .rodata.gic_reg_name, "aS"
+/* Applicable only to GICv2 and GICv3 with SRE disabled (legacy mode) */
gicc_regs:
.asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
+
+/* Applicable only to GICv3 with SRE enabled */
+icc_regs:
+ .asciz "icc_hppir0_el1", "icc_hppir1_el1", "icc_ctlr_el3", ""
+
+/* Registers common to both GICv2 and GICv3 */
gicd_pend_reg:
.asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n" \
" Offset:\t\t\tvalue\n"
@@ -54,6 +63,28 @@
* ---------------------------------------------
*/
.macro arm_print_gic_regs
+ /* Check for GICv3 system register access */
+ mrs x7, id_aa64pfr0_el1
+ ubfx x7, x7, #ID_AA64PFR0_GIC_SHIFT, #ID_AA64PFR0_GIC_WIDTH
+ cmp x7, #1
+ b.ne print_gicv2
+
+ /* Check for SRE enable */
+ mrs x8, ICC_SRE_EL3
+ tst x8, #ICC_SRE_SRE_BIT
+ b.eq print_gicv2
+
+ /* Load the icc reg list to x6 */
+ adr x6, icc_regs
+ /* Load the icc regs to gp regs used by str_in_crash_buf_print */
+ mrs x8, ICC_HPPIR0_EL1
+ mrs x9, ICC_HPPIR1_EL1
+ mrs x10, ICC_CTLR_EL3
+ /* Store to the crash buf and print to console */
+ bl str_in_crash_buf_print
+ b print_gic_common
+
+print_gicv2:
/* Load the gicc reg list to x6 */
adr x6, gicc_regs
/* Load the gicc regs to gp regs used by str_in_crash_buf_print */
@@ -63,6 +94,7 @@
/* Store to the crash buf and print to console */
bl str_in_crash_buf_print
+print_gic_common:
/* Print the GICD_ISPENDR regs */
add x7, x16, #GICD_ISPENDR
adr x4, gicd_pend_reg