refactor(drivers/marvell/comphy-3700): rename Clock Source Low value constants
The constants BUNDLE_PERIOD_SCALE and PLL_READY_DLY refer to two
multi-bit registers within the Clock Source Low register. These
constants are used as masks for those registers (and values are not
defined since we are writing zeros to them).
Give them the _MASK suffix.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Change-Id: Id469d0ab4c755d2d6a0150a1ade33dd9d0293667
diff --git a/drivers/marvell/comphy/phy-comphy-3700.c b/drivers/marvell/comphy/phy-comphy-3700.c
index 7d84fa5..1a97753 100644
--- a/drivers/marvell/comphy/phy-comphy-3700.c
+++ b/drivers/marvell/comphy/phy-comphy-3700.c
@@ -678,8 +678,9 @@
* set Mode Clock Source = PCLK is generated from REFCLK
*/
usb3_reg_set(reg_base, COMPHY_CLK_SRC_LO, 0x0,
- (MODE_CLK_SRC | BUNDLE_PERIOD_SEL | BUNDLE_PERIOD_SCALE |
- BUNDLE_SAMPLE_CTRL | PLL_READY_DLY));
+ (MODE_CLK_SRC | BUNDLE_PERIOD_SEL |
+ BUNDLE_PERIOD_SCALE_MASK | BUNDLE_SAMPLE_CTRL |
+ PLL_READY_DLY_MASK));
/*
* 6. Set G2 Spread Spectrum Clock Amplitude at 4K
diff --git a/drivers/marvell/comphy/phy-comphy-3700.h b/drivers/marvell/comphy/phy-comphy-3700.h
index 67f2eff..ed07624 100644
--- a/drivers/marvell/comphy/phy-comphy-3700.h
+++ b/drivers/marvell/comphy/phy-comphy-3700.h
@@ -180,9 +180,9 @@
#define CLK_SRC_LO_ADDR(unit) (COMPHY_CLK_SRC_LO * PHY_SHFT(unit))
#define MODE_CLK_SRC BIT(0)
#define BUNDLE_PERIOD_SEL BIT(1)
-#define BUNDLE_PERIOD_SCALE (BIT(2) | BIT(3))
+#define BUNDLE_PERIOD_SCALE_MASK (BIT(2) | BIT(3))
#define BUNDLE_SAMPLE_CTRL BIT(4)
-#define PLL_READY_DLY (BIT(5) | BIT(6) | BIT(7))
+#define PLL_READY_DLY_MASK (BIT(5) | BIT(6) | BIT(7))
#define CFG_SEL_20B BIT(15)
#define COMPHY_PWR_MGM_TIM1 0x1D0