Merge pull request #1653 from JackyBai/master
Add NXP i.MX8MQ basic support
diff --git a/docs/plat/imx8m.rst b/docs/plat/imx8m.rst
new file mode 100644
index 0000000..ab33a8a
--- /dev/null
+++ b/docs/plat/imx8m.rst
@@ -0,0 +1,42 @@
+Description
+===========
+
+The i.MX 8M family of applications processors based on Arm Corte-A53 and Cortex-M4
+cores provide high-performance computing, power efficiency, enhanced system
+reliability and embedded security needed to drive the growth of fast-growing
+edge node computing, streaming multimedia, and machine learning applications.
+
+Boot Sequence
+=============
+
+Bootrom --> SPL --> BL31 --> BL33(u-boot) --> Linux kernel
+
+How to build
+============
+
+Build Procedure
+---------------
+
+- Prepare AARCH64 toolchain.
+
+- Build spl and u-boot firstly, and get binary images: u-boot-spl.bin,
+ u-boot-nodtb.bin and dtb for the target board.
+
+- Build TF-A
+
+ Build bl31:
+
+ .. code:: shell
+
+ CROSS_COMPILE=aarch64-linux-gnu- make PLAT=<Target_SoC> bl31
+
+ Target_SoC should be "imx8mq" for i.MX8MQ SoC.
+
+Deploy TF-A Images
+-----------------
+
+TF-A binary(bl31.bin), u-boot-spl.bin u-boot-nodtb.bin and dtb are combined
+together to generate a binary file called flash.bin, the imx-mkimage tool is
+used to generate flash.bin, and flash.bin needs to be flashed into SD card
+with certain offset for BOOT ROM. the u-boot and imx-mkimage will be upstreamed
+soon, this doc will be updated once they are ready, and the link will be posted.
diff --git a/drivers/arm/tzc/tzc380.c b/drivers/arm/tzc/tzc380.c
new file mode 100644
index 0000000..b30a5e6
--- /dev/null
+++ b/drivers/arm/tzc/tzc380.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <debug.h>
+#include <mmio.h>
+#include <stddef.h>
+#include <tzc380.h>
+
+struct tzc380_instance {
+ uintptr_t base;
+ uint8_t addr_width;
+ uint8_t num_regions;
+};
+
+struct tzc380_instance tzc380;
+
+static unsigned int tzc380_read_build_config(uintptr_t base)
+{
+ return mmio_read_32(base + TZC380_CONFIGURATION_OFF);
+}
+
+static void tzc380_write_action(uintptr_t base, tzc_action_t action)
+{
+ mmio_write_32(base + ACTION_OFF, action);
+}
+
+static void tzc380_write_region_base_low(uintptr_t base, unsigned int region,
+ unsigned int val)
+{
+ mmio_write_32(base + REGION_SETUP_LOW_OFF(region), val);
+}
+
+static void tzc380_write_region_base_high(uintptr_t base, unsigned int region,
+ unsigned int val)
+{
+ mmio_write_32(base + REGION_SETUP_HIGH_OFF(region), val);
+}
+
+static void tzc380_write_region_attributes(uintptr_t base, unsigned int region,
+ unsigned int val)
+{
+ mmio_write_32(base + REGION_ATTRIBUTES_OFF(region), val);
+}
+
+void tzc380_init(uintptr_t base)
+{
+ unsigned int tzc_build;
+
+ assert(base != NULL);
+ tzc380.base = base;
+
+ /* Save values we will use later. */
+ tzc_build = tzc380_read_build_config(tzc380.base);
+ tzc380.addr_width = ((tzc_build >> BUILD_CONFIG_AW_SHIFT) &
+ BUILD_CONFIG_AW_MASK) + 1;
+ tzc380.num_regions = ((tzc_build >> BUILD_CONFIG_NR_SHIFT) &
+ BUILD_CONFIG_NR_MASK) + 1;
+}
+
+static uint32_t addr_low(uintptr_t addr)
+{
+ return (uint32_t)addr;
+}
+
+static uint32_t addr_high(uintptr_t addr __unused)
+{
+#if (UINTPTR_MAX == UINT64_MAX)
+ return addr >> 32;
+#else
+ return 0;
+#endif
+}
+
+/*
+ * `tzc380_configure_region` is used to program regions into the TrustZone
+ * controller.
+ */
+void tzc380_configure_region(uint8_t region, uintptr_t region_base, unsigned int attr)
+{
+ assert(tzc380.base != NULL);
+
+ assert(region < tzc380.num_regions);
+
+ tzc380_write_region_base_low(tzc380.base, region, addr_low(region_base));
+ tzc380_write_region_base_high(tzc380.base, region, addr_high(region_base));
+ tzc380_write_region_attributes(tzc380.base, region, attr);
+}
+
+void tzc380_set_action(tzc_action_t action)
+{
+ assert(tzc380.base != NULL);
+
+ /*
+ * - Currently no handler is provided to trap an error via interrupt
+ * or exception.
+ * - The interrupt action has not been tested.
+ */
+ tzc380_write_action(tzc380.base, action);
+}
diff --git a/include/drivers/arm/tzc380.h b/include/drivers/arm/tzc380.h
new file mode 100644
index 0000000..19cf988
--- /dev/null
+++ b/include/drivers/arm/tzc380.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef TZC380_H
+#define TZC380_H
+
+#include <tzc_common.h>
+#include <utils_def.h>
+
+#define TZC380_CONFIGURATION_OFF U(0x000)
+#define ACTION_OFF U(0x004)
+#define LOCKDOWN_RANGE_OFF U(0x008)
+#define LOCKDOWN_SELECT_OFF U(0x00C)
+#define INT_STATUS U(0x010)
+#define INT_CLEAR U(0x014)
+
+#define FAIL_ADDRESS_LOW_OFF U(0x020)
+#define FAIL_ADDRESS_HIGH_OFF U(0x024)
+#define FAIL_CONTROL_OFF U(0x028)
+#define FAIL_ID U(0x02c)
+
+#define SPECULATION_CTRL_OFF U(0x030)
+#define SECURITY_INV_EN_OFF U(0x034)
+
+#define REGION_SETUP_LOW_OFF(n) U(0x100 + (n) * 0x10)
+#define REGION_SETUP_HIGH_OFF(n) U(0x104 + (n) * 0x10)
+#define REGION_ATTRIBUTES_OFF(n) U(0x108 + (n) * 0x10)
+
+#define BUILD_CONFIG_AW_SHIFT 8
+#define BUILD_CONFIG_AW_MASK U(0x3f)
+#define BUILD_CONFIG_NR_SHIFT 0
+#define BUILD_CONFIG_NR_MASK U(0xf)
+
+#define ACTION_RV_SHIFT 0
+#define ACTION_RV_MASK U(0x3)
+#define ACTION_RV_LOWOK U(0x0)
+#define ACTION_RV_LOWERR U(0x1)
+#define ACTION_RV_HIGHOK U(0x2)
+#define ACTION_RV_HIGHERR U(0x3)
+
+/* Speculation is enabled by default. */
+#define SPECULATION_CTRL_WRITE_DISABLE BIT_32(1)
+#define SPECULATION_CTRL_READ_DISABLE BIT_32(0)
+
+#define INT_STATUS_OVERRUN_SHIFT 1
+#define INT_STATUS_OVERRUN_MASK U(0x1)
+#define INT_STATUS_STATUS_SHIFT 0
+#define INT_STATUS_STATUS_MASK U(0x1)
+
+#define INT_CLEAR_CLEAR_SHIFT 0
+#define INT_CLEAR_CLEAR_MASK U(0x1)
+
+#define TZC380_COMPONENT_ID U(0xb105f00d)
+#define TZC380_PERIPH_ID_LOW U(0x001bb380)
+#define TZC380_PERIPH_ID_HIGH U(0x00000004)
+
+#define TZC_SP_NS_W BIT_32(0)
+#define TZC_SP_NS_R BIT_32(1)
+#define TZC_SP_S_W BIT_32(2)
+#define TZC_SP_S_R BIT_32(3)
+
+#define TZC_ATTR_SP_SHIFT 28
+#define TZC_ATTR_SP_ALL ((TZC_SP_S_W | TZC_SP_S_R | TZC_SP_NS_W | \
+ TZC_SP_NS_R) << TZC_ATTR_SP_SHIFT)
+#define TZC_ATTR_SP_S_RW ((TZC_SP_S_W | TZC_SP_S_R) << \
+ TZC_ATTR_SP_SHIFT)
+#define TZC_ATTR_SP_NS_RW ((TZC_SP_NS_W | TZC_SP_NS_R) << \
+ TZC_ATTR_SP_SHIFT)
+
+#define TZC_REGION_SIZE_32K U(0xe)
+#define TZC_REGION_SIZE_64K U(0xf)
+#define TZC_REGION_SIZE_128K U(0x10)
+#define TZC_REGION_SIZE_256K U(0x11)
+#define TZC_REGION_SIZE_512K U(0x12)
+#define TZC_REGION_SIZE_1M U(0x13)
+#define TZC_REGION_SIZE_2M U(0x14)
+#define TZC_REGION_SIZE_4M U(0x15)
+#define TZC_REGION_SIZE_8M U(0x16)
+#define TZC_REGION_SIZE_16M U(0x17)
+#define TZC_REGION_SIZE_32M U(0x18)
+#define TZC_REGION_SIZE_64M U(0x19)
+#define TZC_REGION_SIZE_128M U(0x1a)
+#define TZC_REGION_SIZE_256M U(0x1b)
+#define TZC_REGION_SIZE_512M U(0x1c)
+#define TZC_REGION_SIZE_1G U(0x1d)
+#define TZC_REGION_SIZE_2G U(0x1e)
+#define TZC_REGION_SIZE_4G U(0x1f)
+#define TZC_REGION_SIZE_8G U(0x20)
+#define TZC_REGION_SIZE_16G U(0x21)
+#define TZC_REGION_SIZE_32G U(0x22)
+#define TZC_REGION_SIZE_64G U(0x23)
+#define TZC_REGION_SIZE_128G U(0x24)
+#define TZC_REGION_SIZE_256G U(0x25)
+#define TZC_REGION_SIZE_512G U(0x26)
+#define TZC_REGION_SIZE_1T U(0x27)
+#define TZC_REGION_SIZE_2T U(0x28)
+#define TZC_REGION_SIZE_4T U(0x29)
+#define TZC_REGION_SIZE_8T U(0x2a)
+#define TZC_REGION_SIZE_16T U(0x2b)
+#define TZC_REGION_SIZE_32T U(0x2c)
+#define TZC_REGION_SIZE_64T U(0x2d)
+#define TZC_REGION_SIZE_128T U(0x2e)
+#define TZC_REGION_SIZE_256T U(0x2f)
+#define TZC_REGION_SIZE_512T U(0x30)
+#define TZC_REGION_SIZE_1P U(0x31)
+#define TZC_REGION_SIZE_2P U(0x32)
+#define TZC_REGION_SIZE_4P U(0x33)
+#define TZC_REGION_SIZE_8P U(0x34)
+#define TZC_REGION_SIZE_16P U(0x35)
+#define TZC_REGION_SIZE_32P U(0x36)
+#define TZC_REGION_SIZE_64P U(0x37)
+#define TZC_REGION_SIZE_128P U(0x38)
+#define TZC_REGION_SIZE_256P U(0x39)
+#define TZC_REGION_SIZE_512P U(0x3a)
+#define TZC_REGION_SIZE_1E U(0x3b)
+#define TZC_REGION_SIZE_2E U(0x3c)
+#define TZC_REGION_SIZE_4E U(0x3d)
+#define TZC_REGION_SIZE_8E U(0x3e)
+#define TZC_REGION_SIZE_16E U(0x3f)
+
+#define TZC_REGION_SIZE_SHIFT 0x1
+#define TZC_REGION_SIZE_MASK U(0x7e)
+#define TZC_ATTR_REGION_SIZE(s) ((s) << TZC_REGION_SIZE_SHIFT)
+
+#define TZC_ATTR_REGION_EN_SHIFT 0x0
+#define TZC_ATTR_REGION_EN_MASK U(0x1)
+
+#define TZC_ATTR_REGION_EN
+#define TZC_ATTR_REGION_ENABLE U(0x1)
+#define TZC_ATTR_REGION_DISABLE U(0x0)
+
+#define REGION_MAX 16
+
+void tzc380_init(uintptr_t base);
+void tzc380_configure_region(uint8_t region,
+ uintptr_t region_base,
+ unsigned int attr);
+void tzc380_set_action(tzc_action_t action);
+static inline void tzc_init(uintptr_t base)
+{
+ tzc380_init(base);
+}
+
+static inline void tzc_configure_region(uint8_t region,
+ uintptr_t region_base,
+ unsigned int attr)
+{
+ tzc380_configure_region(region, region_base, attr);
+}
+
+static inline void tzc_set_action(tzc_action_t action)
+{
+ tzc380_set_action(action);
+}
+
+#endif /* TZC380_H */
diff --git a/plat/imx/common/imx_uart_console.S b/plat/imx/common/imx_uart_console.S
new file mode 100644
index 0000000..7dbde79
--- /dev/null
+++ b/plat/imx/common/imx_uart_console.S
@@ -0,0 +1,84 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#define USE_FINISH_CONSOLE_REG_2
+#include <console_macros.S>
+#include <assert_macros.S>
+#include "imx_uart.h"
+
+#define URXD 0x0 /* Receiver Register */
+#define UTXD 0x40 /* Transmitter Register */
+#define UTS 0xb4 /* UART Test Register (mx31) */
+#define URXD_RX_DATA (0xFF)
+
+ .globl console_uart_register
+ .globl console_uart_init
+ .globl console_uart_putc
+ .globl console_uart_getc
+
+func console_imx_uart_register
+ mov x7, x30
+ mov x6, x3
+ cbz x6, register_fail
+ str x0, [x6, #CONSOLE_T_DRVDATA]
+
+ bl console_imx_uart_init
+ cbz x0, register_fail
+
+ mov x0, x6
+ mov x30, x7
+ finish_console_register imx_uart putc=1, getc=1
+
+register_fail:
+ ret x7
+endfunc console_imx_uart_register
+
+func console_imx_uart_init
+ mov w0, #1
+ ret
+endfunc console_imx_uart_init
+
+func console_imx_uart_putc
+ ldr x1, [x1, #CONSOLE_T_DRVDATA]
+ cbz x1, putc_error
+
+ /* Prepare '\r' to '\n' */
+ cmp w0, #0xA
+ b.ne 2f
+1:
+ /* Check if the transmit FIFO is full */
+ ldr w2, [x1, #UTS]
+ tbz w2, #6, 1b
+ mov w2, #0xD
+ str w2, [x1, #UTXD]
+2:
+ /* Check if the transmit FIFO is full */
+ ldr w2, [x1, #UTS]
+ tbz w2, #6, 2b
+ str w0, [x1, #UTXD]
+ ret
+putc_error:
+ mov w0, #-1
+ ret
+endfunc console_imx_uart_putc
+
+func console_imx_uart_getc
+ ldr x0, [x0, #CONSOLE_T_DRVDATA]
+ cbz x0, getc_error
+1:
+ ldr w1, [x0, #UTS]
+ tbnz w1, #5, 1b
+
+ ldr w1, [x0, #URXD]
+ and w0, w1, #URXD_RX_DATA
+
+ ret
+getc_error:
+ mov w0, #-1
+ ret
+endfunc console_imx_uart_getc
diff --git a/plat/imx/common/include/imx_uart.h b/plat/imx/common/include/imx_uart.h
new file mode 100644
index 0000000..d2c3968
--- /dev/null
+++ b/plat/imx/common/include/imx_uart.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef IMX_UART_H
+#define IMX_UART_H
+
+#include <console.h>
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+ console_t console;
+ uintptr_t base;
+} console_uart_t;
+
+int console_uart_register(uintptr_t baseaddr, uint32_t clock, uint32_t baud,
+ console_uart_t *console);
+#endif /*__ASSEMBLY__*/
+
+#endif /* IMX_UART_H */
diff --git a/plat/imx/imx8m/imx8mq/gpc.c b/plat/imx/imx8m/imx8mq/gpc.c
new file mode 100644
index 0000000..187a4ad
--- /dev/null
+++ b/plat/imx/imx8m/imx8mq/gpc.c
@@ -0,0 +1,243 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <debug.h>
+#include <gpc.h>
+#include <mmio.h>
+#include <platform_def.h>
+#include <psci.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <std_svc.h>
+
+void imx_set_cpu_secure_entry(unsigned int core_id, uintptr_t sec_entrypoint)
+{
+ uint64_t temp_base;
+
+ temp_base = (uint64_t) sec_entrypoint;
+ temp_base >>= 2;
+
+ mmio_write_32(IMX_SRC_BASE + SRC_GPR1_OFFSET + (core_id << 3),
+ ((uint32_t)(temp_base >> 22) & 0xffff));
+ mmio_write_32(IMX_SRC_BASE + SRC_GPR1_OFFSET + (core_id << 3) + 4,
+ ((uint32_t)temp_base & 0x003fffff));
+}
+
+/* use wfi power down the core */
+void imx_set_cpu_pwr_off(unsigned int core_id)
+{
+ /* enable the wfi power down of the core */
+ mmio_setbits_32(IMX_GPC_BASE + LPCR_A53_AD, COREx_WFI_PDN(core_id) |
+ (1 << (core_id + 20)));
+ /* assert the pcg pcr bit of the core */
+ mmio_setbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
+};
+
+/* use the sw method to power up the core */
+void imx_set_cpu_pwr_on(unsigned int core_id)
+{
+ /* clear the wfi power down bit of the core */
+ mmio_clrbits_32(IMX_GPC_BASE + LPCR_A53_AD, COREx_WFI_PDN(core_id));
+ /* assert the ncpuporeset */
+ mmio_clrbits_32(IMX_SRC_BASE + SRC_A53RCR1, (1 << core_id));
+ /* assert the pcg pcr bit of the core */
+ mmio_setbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
+ /* sw power up the core */
+ mmio_setbits_32(IMX_GPC_BASE + CPU_PGC_UP_TRG, (1 << core_id));
+
+ /* wait for the power up finished */
+ while ((mmio_read_32(IMX_GPC_BASE + CPU_PGC_UP_TRG) & (1 << core_id)) != 0)
+ ;
+
+ /* deassert the pcg pcr bit of the core */
+ mmio_clrbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
+ /* deassert the ncpuporeset */
+ mmio_setbits_32(IMX_SRC_BASE + SRC_A53RCR1, (1 << core_id));
+}
+
+/* if out of lpm, we need to do reverse steps */
+void imx_set_cpu_lpm(unsigned int core_id, bool pdn)
+{
+ if (pdn) {
+ /* enable the core WFI PDN & IRQ PUP */
+ mmio_setbits_32(IMX_GPC_BASE + LPCR_A53_AD, COREx_WFI_PDN(core_id) |
+ (1 << (core_id + 20)) | COREx_IRQ_WUP(core_id));
+ /* assert the pcg pcr bit of the core */
+ mmio_setbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
+ } else {
+ /* disable CORE WFI PDN & IRQ PUP */
+ mmio_clrbits_32(IMX_GPC_BASE + LPCR_A53_AD, COREx_WFI_PDN(core_id) |
+ COREx_IRQ_WUP(core_id));
+ /* deassert the pcg pcr bit of the core */
+ mmio_setbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
+ }
+}
+
+void imx_set_sys_wakeup(unsigned int last_core, bool pdn)
+{
+ /* TODO */
+}
+
+void imx_pup_pdn_slot_config(int last_core, bool pdn)
+{
+ if (pdn) {
+ /* SLOT0 for A53 PLAT power down */
+ mmio_setbits_32(IMX_GPC_BASE + SLTx_CFG(0), SLT_PLAT_PDN);
+ /* SLOT1 for A53 PLAT power up */
+ mmio_setbits_32(IMX_GPC_BASE + SLTx_CFG(1), SLT_PLAT_PUP);
+ /* SLOT2 for A53 primary core power up */
+ mmio_setbits_32(IMX_GPC_BASE + SLTx_CFG(2), SLT_COREx_PUP(last_core));
+ /* ACK setting: PLAT ACK for PDN, CORE ACK for PUP */
+ mmio_clrsetbits_32(IMX_GPC_BASE + PGC_ACK_SEL_A53, 0xFFFFFFFF,
+ A53_PLAT_PDN_ACK | A53_PLAT_PUP_ACK);
+ } else {
+ mmio_clrbits_32(IMX_GPC_BASE + SLTx_CFG(0), 0xFFFFFFFF);
+ mmio_clrbits_32(IMX_GPC_BASE + SLTx_CFG(1), 0xFFFFFFFF);
+ mmio_clrbits_32(IMX_GPC_BASE + SLTx_CFG(2), 0xFFFFFFFF);
+ mmio_clrsetbits_32(IMX_GPC_BASE + PGC_ACK_SEL_A53, 0xFFFFFFFF,
+ A53_DUMMY_PDN_ACK | A53_DUMMY_PUP_ACK);
+ }
+}
+
+void imx_set_cluster_standby(bool retention)
+{
+ /*
+ * Enable BIT 6 of A53 AD register to make sure system
+ * don't enter LPM mode.
+ */
+ if (retention)
+ mmio_setbits_32(IMX_GPC_BASE + LPCR_A53_AD, (1 << 6));
+ else
+ mmio_clrbits_32(IMX_GPC_BASE + LPCR_A53_AD, (1 << 6));
+}
+
+void imx_set_cluster_powerdown(unsigned int last_core, uint8_t power_state)
+{
+ uint32_t val;
+
+ if (is_local_state_off(power_state)) {
+ val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_BSC);
+ val |= A53_LPM_STOP; /* enable C0-C1's STOP mode */
+ val &= ~CPU_CLOCK_ON_LPM; /* disable CPU clock in LPM mode */
+ mmio_write_32(IMX_GPC_BASE + LPCR_A53_BSC, val);
+
+ /* enable C2-3's STOP mode */
+ mmio_setbits_32(IMX_GPC_BASE + LPCR_A53_BSC2, A53_LPM_STOP);
+
+ /* enable PLAT/SCU power down */
+ val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_AD);
+ val &= ~EN_L2_WFI_PDN;
+ val |= L2PGE | EN_PLAT_PDN;
+ val &= ~COREx_IRQ_WUP(last_core); /* disable IRQ PUP for last core */
+ val |= COREx_LPM_PUP(last_core); /* enable LPM PUP for last core */
+ mmio_write_32(IMX_GPC_BASE + LPCR_A53_AD, val);
+
+ imx_pup_pdn_slot_config(last_core, true);
+
+ /* enable PLAT PGC */
+ mmio_setbits_32(IMX_GPC_BASE + A53_PLAT_PGC, 0x1);
+ } else {
+ /* clear PLAT PGC */
+ mmio_clrbits_32(IMX_GPC_BASE + A53_PLAT_PGC, 0x1);
+
+ /* clear the slot and ack for cluster power down */
+ imx_pup_pdn_slot_config(last_core, false);
+
+ val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_BSC);
+ val &= ~A53_LPM_MASK; /* clear the C0~1 LPM */
+ val |= CPU_CLOCK_ON_LPM; /* disable cpu clock in LPM */
+ mmio_write_32(IMX_GPC_BASE + LPCR_A53_BSC, val);
+
+ /* set A53 LPM to RUN mode */
+ mmio_clrbits_32(IMX_GPC_BASE + LPCR_A53_BSC2, A53_LPM_MASK);
+
+ /* clear PLAT/SCU power down */
+ val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_AD);
+ val |= EN_L2_WFI_PDN;
+ val &= ~(L2PGE | EN_PLAT_PDN);
+ val &= ~COREx_LPM_PUP(last_core); /* disable C0's LPM PUP */
+ mmio_write_32(IMX_GPC_BASE + LPCR_A53_AD, val);
+ }
+}
+
+/* config the system level power mode */
+void imx_set_sys_lpm(bool retention)
+{
+ uint32_t val;
+
+ /* set system DSM mode SLPCR(0x14) */
+ val = mmio_read_32(IMX_GPC_BASE + SLPCR);
+ val &= ~(SLPCR_EN_DSM | SLPCR_VSTBY | SLPCR_SBYOS |
+ SLPCR_BYPASS_PMIC_READY | SLPCR_RBC_EN);
+
+ if (retention)
+ val |= (SLPCR_EN_DSM | SLPCR_VSTBY | SLPCR_SBYOS |
+ SLPCR_BYPASS_PMIC_READY | SLPCR_RBC_EN |
+ SLPCR_A53_FASTWUP_STOP_MODE);
+
+ mmio_write_32(IMX_GPC_BASE + SLPCR, val);
+}
+
+void imx_set_rbc_count(void)
+{
+ mmio_setbits_32(IMX_GPC_BASE + SLPCR, 0x3f << SLPCR_RBC_COUNT_SHIFT);
+}
+
+void imx_clear_rbc_count(void)
+{
+ mmio_clrbits_32(IMX_GPC_BASE + SLPCR, 0x3f << SLPCR_RBC_COUNT_SHIFT);
+}
+
+void imx_gpc_init(void)
+{
+ uint32_t val;
+ int i;
+ /* mask all the interrupt by default */
+ /* Due to the hardware design requirement, need to make
+ * sure GPR interrupt(#32) is unmasked during RUN mode to
+ * avoid entering DSM mode by mistake.
+ */
+ for (i = 0; i < 4; i++) {
+ mmio_write_32(IMX_GPC_BASE + IMR1_CORE0_A53 + i * 4, 0xFFFFFFFE);
+ mmio_write_32(IMX_GPC_BASE + IMR1_CORE1_A53 + i * 4, 0xFFFFFFFE);
+ mmio_write_32(IMX_GPC_BASE + IMR1_CORE2_A53 + i * 4, 0xFFFFFFFE);
+ mmio_write_32(IMX_GPC_BASE + IMR1_CORE3_A53 + i * 4, 0xFFFFFFFE);
+ mmio_write_32(IMX_GPC_BASE + IMR1_CORE0_M4 + i * 4, ~0x0);
+ }
+
+ /* use external IRQs to wakeup C0~C3 from LPM */
+ val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_BSC);
+ val |= IRQ_SRC_A53_WUP;
+ /* clear the MASTER0 LPM handshake */
+ val &= ~MASTER0_LPM_HSK;
+ mmio_write_32(IMX_GPC_BASE + LPCR_A53_BSC, val);
+
+ /* mask M4 DSM trigger if M4 is NOT enabled */
+ mmio_setbits_32(IMX_GPC_BASE + LPCR_M4, DSM_MODE_MASK);
+
+ /* set all mix/PU in A53 domain */
+ mmio_write_32(IMX_GPC_BASE + PGC_CPU_0_1_MAPPING, 0xfffd);
+
+ /* set SCU timming */
+ mmio_write_32(IMX_GPC_BASE + PGC_SCU_TIMING,
+ (0x59 << 10) | 0x5B | (0x2 << 20));
+
+ /* set DUMMY PDN/PUP ACK by default for A53 domain */
+ mmio_write_32(IMX_GPC_BASE + PGC_ACK_SEL_A53, A53_DUMMY_PUP_ACK |
+ A53_DUMMY_PDN_ACK);
+
+ /* disable DSM mode by default */
+ mmio_clrbits_32(IMX_GPC_BASE + SLPCR, DSM_MODE_MASK);
+
+ /*
+ * USB PHY power up needs to make sure RESET bit in SRC is clear,
+ * otherwise, the PU power up bit in GPC will NOT self-cleared.
+ * only need to do it once.
+ */
+ mmio_clrbits_32(IMX_SRC_BASE + SRC_OTG1PHY_SCR, 0x1);
+ mmio_clrbits_32(IMX_SRC_BASE + SRC_OTG2PHY_SCR, 0x1);
+}
diff --git a/plat/imx/imx8m/imx8mq/imx8mq_bl31_setup.c b/plat/imx/imx8m/imx8mq/imx8mq_bl31_setup.c
new file mode 100644
index 0000000..45d2a40
--- /dev/null
+++ b/plat/imx/imx8m/imx8mq/imx8mq_bl31_setup.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <console.h>
+#include <context.h>
+#include <context_mgmt.h>
+#include <debug.h>
+#include <gpc.h>
+#include <imx_uart.h>
+#include <stdbool.h>
+#include <mmio.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <plat_imx8.h>
+#include <xlat_tables.h>
+#include <tzc380.h>
+
+IMPORT_SYM(uintptr_t, __COHERENT_RAM_START__, BL31_COHERENT_RAM_START);
+IMPORT_SYM(uintptr_t, __COHERENT_RAM_END__, BL31_COHERENT_RAM_END);
+IMPORT_SYM(uintptr_t, __RO_START__, BL31_RO_START);
+IMPORT_SYM(uintptr_t, __RO_END__, BL31_RO_END);
+IMPORT_SYM(uintptr_t, __RW_START__, BL31_RW_START);
+IMPORT_SYM(uintptr_t, __RW_END__, BL31_RW_END);
+
+static const mmap_region_t imx_mmap[] = {
+ MAP_REGION_FLAT(GPV_BASE, GPV_SIZE, MT_DEVICE | MT_RW), /* GPV map */
+ MAP_REGION_FLAT(IMX_AIPS_BASE, IMX_AIPS_SIZE, MT_DEVICE | MT_RW), /* AIPS map */
+ MAP_REGION_FLAT(IMX_GIC_BASE, IMX_GIC_SIZE, MT_DEVICE | MT_RW), /* GIC map */
+ {0},
+};
+
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+/* get SPSR for BL33 entry */
+static uint32_t get_spsr_for_bl33_entry(void)
+{
+ unsigned long el_status;
+ unsigned long mode;
+ uint32_t spsr;
+
+ /* figure out what mode we enter the non-secure world */
+ el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+ el_status &= ID_AA64PFR0_ELX_MASK;
+
+ mode = (el_status) ? MODE_EL2 : MODE_EL1;
+
+ spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+ return spsr;
+}
+
+static void bl31_tz380_setup(void)
+{
+ unsigned int val;
+
+ val = mmio_read_32(IMX_IOMUX_GPR_BASE + IOMUXC_GPR10);
+ if ((val & GPR_TZASC_EN) != GPR_TZASC_EN)
+ return;
+
+ tzc380_init(IMX_TZASC_BASE);
+ /*
+ * Need to substact offset 0x40000000 from CPU address when
+ * programming tzasc region for i.mx8mq. Enable 1G-5G S/NS RW
+ */
+ tzc380_configure_region(0, 0x00000000, TZC_ATTR_REGION_SIZE(TZC_REGION_SIZE_4G) |
+ TZC_ATTR_REGION_EN_MASK | TZC_ATTR_SP_ALL);
+}
+
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+{
+ int i;
+ /* enable CSU NS access permission */
+ for (i = 0; i < 64; i++) {
+ mmio_write_32(IMX_CSU_BASE + i * 4, 0xffffffff);
+ }
+
+#if DEBUG_CONSOLE
+ static console_uart_t console;
+
+ console_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
+ IMX_CONSOLE_BAUDRATE, &console);
+#endif
+ /*
+ * tell BL3-1 where the non-secure software image is located
+ * and the entry state information.
+ */
+ bl33_image_ep_info.pc = PLAT_NS_IMAGE_OFFSET;
+ bl33_image_ep_info.spsr = get_spsr_for_bl33_entry();
+ SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+
+ bl31_tz380_setup();
+}
+
+void bl31_plat_arch_setup(void)
+{
+ mmap_add_region(BL31_RO_START, BL31_RO_START, (BL31_RO_END - BL31_RO_START),
+ MT_MEMORY | MT_RO | MT_SECURE);
+ mmap_add_region(BL31_RW_START, BL31_RW_START, (BL31_RW_END - BL31_RW_START),
+ MT_MEMORY | MT_RW | MT_SECURE);
+
+ mmap_add(imx_mmap);
+
+#if USE_COHERENT_MEM
+ mmap_add_region(BL31_COHERENT_RAM_START, BL31_COHERENT_RAM_START,
+ BL31_COHERENT_RAM_END - BL31_COHERENT_RAM_START,
+ MT_DEVICE | MT_RW | MT_SECURE);
+#endif
+ /* setup xlat table */
+ init_xlat_tables();
+ /* enable the MMU */
+ enable_mmu_el3(0);
+}
+
+void bl31_platform_setup(void)
+{
+ /* init the GICv3 cpu and distributor interface */
+ plat_gic_driver_init();
+ plat_gic_init();
+
+ /* gpc init */
+ imx_gpc_init();
+}
+
+entry_point_info_t *bl31_plat_get_next_image_ep_info(unsigned int type)
+{
+ if (type == NON_SECURE)
+ return &bl33_image_ep_info;
+ if (type == SECURE)
+ return &bl32_image_ep_info;
+
+ return NULL;
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+ return COUNTER_FREQUENCY;
+}
+
+void bl31_plat_runtime_setup(void)
+{
+ return;
+}
diff --git a/plat/imx/imx8m/imx8mq/imx8mq_psci.c b/plat/imx/imx8m/imx8mq/imx8mq_psci.c
new file mode 100644
index 0000000..7afe52d
--- /dev/null
+++ b/plat/imx/imx8m/imx8mq/imx8mq_psci.c
@@ -0,0 +1,229 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <debug.h>
+#include <gpc.h>
+#include <stdbool.h>
+#include <plat_imx8.h>
+#include <psci.h>
+#include <mmio.h>
+
+#define CORE_PWR_STATE(state) ((state)->pwr_domain_state[MPIDR_AFFLVL0])
+#define CLUSTER_PWR_STATE(state) ((state)->pwr_domain_state[MPIDR_AFFLVL1])
+#define SYSTEM_PWR_STATE(state) ((state)->pwr_domain_state[PLAT_MAX_PWR_LVL])
+
+int imx_pwr_domain_on(u_register_t mpidr)
+{
+ unsigned int core_id;
+ uint64_t base_addr = BL31_BASE;
+
+ core_id = MPIDR_AFFLVL0_VAL(mpidr);
+
+ /* set the secure entrypoint */
+ imx_set_cpu_secure_entry(core_id, base_addr);
+ /* power up the core */
+ imx_set_cpu_pwr_on(core_id);
+
+ return PSCI_E_SUCCESS;
+}
+
+void imx_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+ /* program the GIC per cpu dist and rdist interface */
+ plat_gic_pcpu_init();
+ /* enable the GICv3 cpu interface */
+ plat_gic_cpuif_enable();
+}
+
+void imx_pwr_domain_off(const psci_power_state_t *target_state)
+{
+ uint64_t mpidr = read_mpidr_el1();
+ unsigned int core_id = MPIDR_AFFLVL0_VAL(mpidr);
+
+ /* disable the GIC cpu interface first */
+ plat_gic_cpuif_disable();
+ /* config the core for power down */
+ imx_set_cpu_pwr_off(core_id);
+}
+
+int imx_validate_ns_entrypoint(uintptr_t ns_entrypoint)
+{
+ /* The non-secure entrypoint should be in RAM space */
+ if (ns_entrypoint < PLAT_NS_IMAGE_OFFSET)
+ return PSCI_E_INVALID_PARAMS;
+
+ return PSCI_E_SUCCESS;
+}
+
+int imx_validate_power_state(unsigned int power_state,
+ psci_power_state_t *req_state)
+{
+ int pwr_lvl = psci_get_pstate_pwrlvl(power_state);
+ int pwr_type = psci_get_pstate_type(power_state);
+ int state_id = psci_get_pstate_id(power_state);
+
+ if (pwr_lvl > PLAT_MAX_PWR_LVL)
+ return PSCI_E_INVALID_PARAMS;
+
+ if (pwr_type == PSTATE_TYPE_STANDBY) {
+ CORE_PWR_STATE(req_state) = PLAT_MAX_RET_STATE;
+ CLUSTER_PWR_STATE(req_state) = PLAT_MAX_RET_STATE;
+ }
+
+ if (pwr_type == PSTATE_TYPE_POWERDOWN && state_id == 0x33) {
+ CORE_PWR_STATE(req_state) = PLAT_MAX_OFF_STATE;
+ CLUSTER_PWR_STATE(req_state) = PLAT_MAX_RET_STATE;
+ }
+
+ return PSCI_E_SUCCESS;
+}
+
+void imx_cpu_standby(plat_local_state_t cpu_state)
+{
+ dsb();
+ write_scr_el3(read_scr_el3() | SCR_FIQ_BIT);
+ isb();
+
+ wfi();
+
+ write_scr_el3(read_scr_el3() & (~SCR_FIQ_BIT));
+ isb();
+}
+
+void imx_domain_suspend(const psci_power_state_t *target_state)
+{
+ uint64_t base_addr = BL31_BASE;
+ uint64_t mpidr = read_mpidr_el1();
+ unsigned int core_id = MPIDR_AFFLVL0_VAL(mpidr);
+
+ if (is_local_state_off(CORE_PWR_STATE(target_state))) {
+ /* disable the cpu interface */
+ plat_gic_cpuif_disable();
+ imx_set_cpu_secure_entry(core_id, base_addr);
+ imx_set_cpu_lpm(core_id, true);
+ } else {
+ dsb();
+ write_scr_el3(read_scr_el3() | SCR_FIQ_BIT);
+ isb();
+ }
+
+ if (is_local_state_off(CLUSTER_PWR_STATE(target_state)))
+ imx_set_cluster_powerdown(core_id, true);
+ else
+ imx_set_cluster_standby(true);
+
+ if (is_local_state_retn(SYSTEM_PWR_STATE(target_state))) {
+ imx_set_sys_lpm(true);
+ }
+}
+
+void imx_domain_suspend_finish(const psci_power_state_t *target_state)
+{
+ uint64_t mpidr = read_mpidr_el1();
+ unsigned int core_id = MPIDR_AFFLVL0_VAL(mpidr);
+
+ /* check the system level status */
+ if (is_local_state_retn(SYSTEM_PWR_STATE(target_state))) {
+ imx_set_sys_lpm(false);
+ imx_clear_rbc_count();
+ }
+
+ /* check the cluster level power status */
+ if (is_local_state_off(CLUSTER_PWR_STATE(target_state)))
+ imx_set_cluster_powerdown(core_id, false);
+ else
+ imx_set_cluster_standby(false);
+
+ /* check the core level power status */
+ if (is_local_state_off(CORE_PWR_STATE(target_state))) {
+ /* clear the core lpm setting */
+ imx_set_cpu_lpm(core_id, false);
+ /* enable the gic cpu interface */
+ plat_gic_cpuif_enable();
+ } else {
+ write_scr_el3(read_scr_el3() & (~0x4));
+ isb();
+ }
+}
+
+void imx_get_sys_suspend_power_state(psci_power_state_t *req_state)
+{
+ unsigned int i;
+
+ for (i = IMX_PWR_LVL0; i < PLAT_MAX_PWR_LVL; i++)
+ req_state->pwr_domain_state[i] = PLAT_STOP_OFF_STATE;
+
+ req_state->pwr_domain_state[PLAT_MAX_PWR_LVL] = PLAT_MAX_RET_STATE;
+}
+
+void __dead2 imx_system_reset(void)
+{
+ uintptr_t wdog_base = IMX_WDOG_BASE;
+ unsigned int val;
+
+ /* WDOG_B reset */
+ val = mmio_read_16(wdog_base);
+#ifdef IMX_WDOG_B_RESET
+ val = (val & 0x00FF) | WDOG_WCR_WDZST | WDOG_WCR_WDE |
+ WDOG_WCR_WDT | WDOG_WCR_SRS;
+#else
+ val = (val & 0x00FF) | WDOG_WCR_WDZST | WDOG_WCR_SRS;
+#endif
+ mmio_write_16(wdog_base, val);
+
+ mmio_write_16(wdog_base + WDOG_WSR, 0x5555);
+ mmio_write_16(wdog_base + WDOG_WSR, 0xaaaa);
+ while (1)
+ ;
+}
+
+
+
+void __dead2 imx_system_off(void)
+{
+ mmio_write_32(IMX_SNVS_BASE + SNVS_LPCR, SNVS_LPCR_SRTC_ENV |
+ SNVS_LPCR_DP_EN | SNVS_LPCR_TOP);
+
+ while (1)
+ ;
+}
+
+void __dead2 imx_pwr_domain_pwr_down_wfi(const psci_power_state_t *target_state)
+{
+ if (is_local_state_off(CLUSTER_PWR_STATE(target_state)))
+ imx_set_rbc_count();
+
+ while (1)
+ wfi();
+}
+
+static const plat_psci_ops_t imx_plat_psci_ops = {
+ .pwr_domain_on = imx_pwr_domain_on,
+ .pwr_domain_on_finish = imx_pwr_domain_on_finish,
+ .pwr_domain_off = imx_pwr_domain_off,
+ .validate_ns_entrypoint = imx_validate_ns_entrypoint,
+ .validate_power_state = imx_validate_power_state,
+ .cpu_standby = imx_cpu_standby,
+ .pwr_domain_suspend = imx_domain_suspend,
+ .pwr_domain_suspend_finish = imx_domain_suspend_finish,
+ .pwr_domain_pwr_down_wfi = imx_pwr_domain_pwr_down_wfi,
+ .get_sys_suspend_power_state = imx_get_sys_suspend_power_state,
+ .system_reset = imx_system_reset,
+ .system_off = imx_system_off,
+};
+
+/* export the platform specific psci ops */
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+ const plat_psci_ops_t **psci_ops)
+{
+ imx_mailbox_init(sec_entrypoint);
+ /* sec_entrypoint is used for warm reset */
+ *psci_ops = &imx_plat_psci_ops;
+
+ return 0;
+}
diff --git a/plat/imx/imx8m/imx8mq/include/platform_def.h b/plat/imx/imx8m/imx8mq/include/platform_def.h
new file mode 100644
index 0000000..4957582
--- /dev/null
+++ b/plat/imx/imx8m/imx8mq/include/platform_def.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#define PLATFORM_LINKER_FORMAT "elf64-littleaarch64"
+#define PLATFORM_LINKER_ARCH aarch64
+
+#define PLATFORM_STACK_SIZE 0x800
+#define CACHE_WRITEBACK_GRANULE 64
+
+#define PLAT_PRIMARY_CPU 0x0
+#define PLATFORM_MAX_CPU_PER_CLUSTER 4
+#define PLATFORM_CLUSTER_COUNT 1
+#define PLATFORM_CLUSTER0_CORE_COUNT 4
+#define PLATFORM_CLUSTER1_CORE_COUNT 0
+#define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER0_CORE_COUNT)
+
+#define IMX_PWR_LVL0 MPIDR_AFFLVL0
+#define IMX_PWR_LVL1 MPIDR_AFFLVL1
+#define IMX_PWR_LVL2 MPIDR_AFFLVL2
+
+#define PWR_DOMAIN_AT_MAX_LVL U(1)
+#define PLAT_MAX_PWR_LVL U(2)
+#define PLAT_MAX_OFF_STATE U(4)
+#define PLAT_MAX_RET_STATE U(1)
+
+#define PLAT_WAIT_OFF_STATE U(2)
+#define PLAT_STOP_OFF_STATE U(3)
+
+#define BL31_BASE U(0x910000)
+#define BL31_LIMIT U(0x920000)
+#define BL32_BASE U(0xfe000000)
+
+/* non-secure uboot base */
+#define PLAT_NS_IMAGE_OFFSET U(0x40200000)
+
+/* GICv3 base address */
+#define PLAT_GICD_BASE U(0x38800000)
+#define PLAT_GICR_BASE U(0x38880000)
+
+#define PLAT_VIRT_ADDR_SPACE_SIZE (1ull << 32)
+#define PLAT_PHY_ADDR_SPACE_SIZE (1ull << 32)
+
+#define MAX_XLAT_TABLES 4
+#define MAX_MMAP_REGIONS 14
+
+#define HAB_RVT_BASE U(0x00000880) /* HAB_RVT for i.MX8MQ */
+
+#define IMX_BOOT_UART_BASE U(0x30860000)
+#define IMX_BOOT_UART_CLK_IN_HZ 25000000 /* Select 25Mhz oscillator */
+#define PLAT_CRASH_UART_BASE IMX_BOOT_UART_BASE
+#define PLAT_CRASH_UART_CLK_IN_HZ 25000000
+#define IMX_CONSOLE_BAUDRATE 115200
+
+#define IMX_AIPS_BASE U(0x30200000)
+#define IMX_AIPS_SIZE U(0xC00000)
+#define IMX_AIPS1_BASE U(0x30200000)
+#define IMX_AIPS3_ARB_BASE U(0x30800000)
+#define IMX_ANAMIX_BASE U(0x30360000)
+#define IMX_CCM_BASE U(0x30380000)
+#define IMX_SRC_BASE U(0x30390000)
+#define IMX_GPC_BASE U(0x303a0000)
+#define IMX_RDC_BASE U(0x303d0000)
+#define IMX_CSU_BASE U(0x303e0000)
+#define IMX_WDOG_BASE U(0x30280000)
+#define IMX_SNVS_BASE U(0x30370000)
+#define IMX_NOC_BASE U(0x32700000)
+#define IMX_TZASC_BASE U(0x32F80000)
+#define IMX_IOMUX_GPR_BASE U(0x30340000)
+#define IMX_DDRC_BASE U(0x3d400000)
+#define IMX_DDRPHY_BASE U(0x3c000000)
+#define IMX_DDR_IPS_BASE U(0x3d000000)
+#define IMX_ROM_BASE U(0x00000000)
+
+#define AIPSTZ1_BASE U(0x301f0000)
+#define AIPSTZ2_BASE U(0x305f0000)
+#define AIPSTZ3_BASE U(0x309f0000)
+#define AIPSTZ4_BASE U(0x32df0000)
+
+#define GPV_BASE U(0x32000000)
+#define GPV_SIZE U(0x800000)
+#define IMX_GIC_BASE PLAT_GICD_BASE
+#define IMX_GIC_SIZE U(0x200000)
+
+#define WDOG_WSR U(0x2)
+#define WDOG_WCR_WDZST BIT(0)
+#define WDOG_WCR_WDBG BIT(1)
+#define WDOG_WCR_WDE BIT(2)
+#define WDOG_WCR_WDT BIT(3)
+#define WDOG_WCR_SRS BIT(4)
+#define WDOG_WCR_WDA BIT(5)
+#define WDOG_WCR_SRE BIT(6)
+#define WDOG_WCR_WDW BIT(7)
+
+#define SRC_A53RCR0 U(0x4)
+#define SRC_A53RCR1 U(0x8)
+#define SRC_OTG1PHY_SCR U(0x20)
+#define SRC_OTG2PHY_SCR U(0x24)
+#define SRC_GPR1_OFFSET U(0x74)
+
+#define SNVS_LPCR U(0x38)
+#define SNVS_LPCR_SRTC_ENV BIT(0)
+#define SNVS_LPCR_DP_EN BIT(5)
+#define SNVS_LPCR_TOP BIT(6)
+
+
+#define IOMUXC_GPR10 U(0x28)
+#define GPR_TZASC_EN BIT(0)
+#define GPR_TZASC_EN_LOCK BIT(16)
+
+#define OCRAM_S_BASE U(0x00180000)
+#define OCRAM_S_SIZE U(0x8000)
+#define OCRAM_S_LIMIT (OCRAM_S_BASE + OCRAM_S_SIZE)
+
+#define COUNTER_FREQUENCY 8000000 /* 8MHz */
+
+#define DEBUG_CONSOLE 0
+#define IMX_WDOG_B_RESET
+#define PLAT_IMX8M 1
diff --git a/plat/imx/imx8m/imx8mq/platform.mk b/plat/imx/imx8m/imx8mq/platform.mk
new file mode 100644
index 0000000..0255268
--- /dev/null
+++ b/plat/imx/imx8m/imx8mq/platform.mk
@@ -0,0 +1,36 @@
+#
+# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+PLAT_INCLUDES := -Iplat/imx/common/include \
+ -Iplat/imx/imx8m/include \
+ -Iplat/imx/imx8m/imx8mq/include
+
+IMX_GIC_SOURCES := drivers/arm/gic/v3/gicv3_helpers.c \
+ drivers/arm/gic/v3/arm_gicv3_common.c \
+ drivers/arm/gic/v3/gic500.c \
+ drivers/arm/gic/v3/gicv3_main.c \
+ drivers/arm/gic/common/gic_common.c \
+ plat/common/plat_gicv3.c \
+ plat/common/plat_psci_common.c \
+ plat/imx/common/plat_imx8_gic.c
+
+BL31_SOURCES += plat/imx/common/imx8_helpers.S \
+ plat/imx/imx8m/imx8mq/imx8mq_bl31_setup.c \
+ plat/imx/imx8m/imx8mq/imx8mq_psci.c \
+ plat/imx/imx8m/imx8mq/gpc.c \
+ plat/imx/common/imx8_topology.c \
+ plat/imx/common/imx_uart_console.S \
+ lib/xlat_tables/aarch64/xlat_tables.c \
+ lib/xlat_tables/xlat_tables_common.c \
+ lib/cpus/aarch64/cortex_a53.S \
+ drivers/console/aarch64/console.S \
+ drivers/arm/tzc/tzc380.c \
+ ${IMX_GIC_SOURCES}
+
+USE_COHERENT_MEM := 1
+RESET_TO_BL31 := 1
+A53_DISABLE_NON_TEMPORAL_HINT := 0
+MULTI_CONSOLE_API := 1
diff --git a/plat/imx/imx8m/include/gpc.h b/plat/imx/imx8m/include/gpc.h
new file mode 100644
index 0000000..6fdf6ad
--- /dev/null
+++ b/plat/imx/imx8m/include/gpc.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef IMX8M_GPC_H
+#define IMX8M_GPC_H
+
+#define LPCR_A53_BSC 0x0
+#define LPCR_A53_BSC2 0x108
+#define LPCR_A53_AD 0x4
+#define LPCR_M4 0x8
+#define SLPCR 0x14
+#define MST_CPU_MAPPING 0x18
+#define MLPCR 0x20
+#define PGC_ACK_SEL_A53 0x24
+#define IMR1_CORE0_A53 0x30
+#define IMR1_CORE1_A53 0x40
+#define IMR1_CORE2_A53 0x1C0
+#define IMR1_CORE3_A53 0x1D0
+#define IMR1_CORE0_M4 0x50
+#define SLT0_CFG 0xB0
+#define GPC_PU_PWRHSK 0x1FC
+#define PGC_CPU_0_1_MAPPING 0xEC
+#define CPU_PGC_UP_TRG 0xF0
+#define PU_PGC_UP_TRG 0xF8
+#define CPU_PGC_DN_TRG 0xFC
+#define PU_PGC_DN_TRG 0x104
+#define A53_CORE0_PGC 0x800
+#define A53_PLAT_PGC 0x900
+#define PGC_SCU_TIMING 0x910
+
+#define MASK_DSM_TRIGGER_A53 BIT(31)
+#define IRQ_SRC_A53_WUP BIT(30)
+#define IRQ_SRC_C1 BIT(29)
+#define IRQ_SRC_C0 BIT(28)
+#define IRQ_SRC_C3 BIT(23)
+#define IRQ_SRC_C2 BIT(22)
+#define CPU_CLOCK_ON_LPM BIT(14)
+#define MASTER0_LPM_HSK BIT(6)
+
+#define L2PGE BIT(31)
+#define EN_L2_WFI_PDN BIT(5)
+#define EN_PLAT_PDN BIT(4)
+
+#define SLPCR_EN_DSM BIT(31)
+#define SLPCR_RBC_EN BIT(30)
+#define SLPCR_A53_FASTWUP_STOP_MODE BIT(17)
+#define SLPCR_A53_FASTWUP_WAIT_MODE BIT(16)
+#define SLPCR_VSTBY BIT(2)
+#define SLPCR_SBYOS BIT(1)
+#define SLPCR_BYPASS_PMIC_READY BIT(0)
+#define SLPCR_RBC_COUNT_SHIFT 24
+
+#define A53_DUMMY_PDN_ACK BIT(15)
+#define A53_DUMMY_PUP_ACK BIT(31)
+#define A53_PLAT_PDN_ACK BIT(2)
+#define A53_PLAT_PUP_ACK BIT(18)
+
+#define SLT_PLAT_PDN BIT(8)
+#define SLT_PLAT_PUP BIT(9)
+
+/* helper macro */
+#define A53_LPM_MASK U(0xF)
+#define A53_LPM_WAIT U(0x5)
+#define A53_LPM_STOP U(0xA)
+
+#define DSM_MODE_MASK BIT(31)
+
+#define A53_CORE_WUP_SRC(core_id) (1 << ((core_id) < 2 ? 28 + (core_id) : 22 + (core_id) - 2))
+#define COREx_PGC_PCR(core_id) (0x800 + (core_id) * 0x40)
+#define COREx_WFI_PDN(core_id) (1 << ((core_id) < 2 ? (core_id) * 2 : ((core_id) - 2) * 2 + 16))
+#define COREx_IRQ_WUP(core_id) ((core_id) < 2 ? (1 << ((core_id) * 2 + 8)) : (1 << ((core_id) * 2 + 20)))
+#define COREx_LPM_PUP(core_id) ((core_id) < 2 ? (1 << ((core_id) * 2 + 9)) : (1 << ((core_id) * 2 + 21)))
+#define SLTx_CFG(n) ((SLT0_CFG + ((n) * 4)))
+#define SLT_COREx_PUP(core_id) (0x2 << ((core_id) * 2))
+
+/* function declare */
+void imx_gpc_init(void);
+void imx_set_cpu_secure_entry(unsigned int core_index, uintptr_t sec_entrypoint);
+void imx_set_cpu_pwr_off(unsigned int core_index);
+void imx_set_cpu_pwr_on(unsigned int core_index);
+void imx_set_cpu_lpm(unsigned int core_index, bool pdn);
+void imx_set_cluster_standby(bool retention);
+void imx_set_cluster_powerdown(unsigned int last_core, uint8_t power_state);
+void imx_set_sys_lpm(bool retention);
+void imx_set_rbc_count(void);
+void imx_clear_rbc_count(void);
+
+#endif /*IMX8M_GPC_H */
diff --git a/plat/layerscape/board/ls1043/include/soc_tzasc.h b/plat/layerscape/board/ls1043/include/soc_tzasc.h
index b2483d9..46dfba0 100644
--- a/plat/layerscape/board/ls1043/include/soc_tzasc.h
+++ b/plat/layerscape/board/ls1043/include/soc_tzasc.h
@@ -7,8 +7,6 @@
#ifndef SOC_TZASC_H
#define SOC_TZASC_H
-#include "tzc380.h"
-
#define MAX_NUM_TZC_REGION 3
/* TZASC related constants */
@@ -58,6 +56,15 @@
#define CCI_TERMINATE_BARRIER_TX 0x8
#define CONFIG_SYS_FSL_TZASC_ADDR 0x1500000
+struct tzc380_reg {
+ unsigned int secure;
+ unsigned int enabled;
+ unsigned int low_addr;
+ unsigned int high_addr;
+ unsigned int size;
+ unsigned int sub_mask;
+};
+
/* List of MAX_NUM_TZC_REGION TZC regions' boundaries and configurations. */
static const struct tzc380_reg tzc380_reg_list[] = {
diff --git a/plat/layerscape/common/include/tzc380.h b/plat/layerscape/common/include/tzc380.h
deleted file mode 100644
index 88063a9..0000000
--- a/plat/layerscape/common/include/tzc380.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#ifndef TZC380_H
-#define TZC380_H
-
-struct tzc380_reg {
- unsigned int secure;
- unsigned int enabled;
- unsigned int low_addr;
- unsigned int high_addr;
- unsigned int size;
- unsigned int sub_mask;
-};
-
-#endif /* TZC380_H */