Remove dtc warnings
DTC generates warnings when unit names begin with 0, or
when a node containing a reg or range property doesn't have a unit name
in the node name. This patch fixes those cases.
Change-Id: If24ec68ef3034fb3fcefb96c5625c47a0bbd8474
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
diff --git a/fdts/fvp-base-gicv3-psci-common.dtsi b/fdts/fvp-base-gicv3-psci-common.dtsi
index 2ef2df8..631c4e3 100644
--- a/fdts/fvp-base-gicv3-psci-common.dtsi
+++ b/fdts/fvp-base-gicv3-psci-common.dtsi
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -228,7 +228,7 @@
<0 63 4>;
};
- smb {
+ smb@0,0 {
compatible = "simple-bus";
#address-cells = <2>;
@@ -244,7 +244,7 @@
};
panels {
- panel@0 {
+ panel {
compatible = "panel";
mode = "XVGA";
refresh = <60>;
diff --git a/fdts/fvp-foundation-motherboard.dtsi b/fdts/fvp-foundation-motherboard.dtsi
index ae7237b..9ee5b64 100644
--- a/fdts/fvp-foundation-motherboard.dtsi
+++ b/fdts/fvp-foundation-motherboard.dtsi
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -44,14 +44,14 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg@010000 {
+ v2m_sysreg: sysreg@10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
- v2m_sysctl: sysctl@020000 {
+ v2m_sysctl: sysctl@20000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
@@ -60,7 +60,7 @@
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
};
- v2m_serial0: uart@090000 {
+ v2m_serial0: uart@90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <0 5 4>;
@@ -68,7 +68,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a0000 {
+ v2m_serial1: uart@a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <0 6 4>;
@@ -76,7 +76,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b0000 {
+ v2m_serial2: uart@b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <0 7 4>;
@@ -84,7 +84,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c0000 {
+ v2m_serial3: uart@c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <0 8 4>;
@@ -92,7 +92,7 @@
clock-names = "uartclk", "apb_pclk";
};
- wdt@0f0000 {
+ wdt@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0 0 4>;
@@ -124,7 +124,7 @@
clock-names = "apb_pclk";
};
- virtio_block@0130000 {
+ virtio_block@130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x1000>;
interrupts = <0 0x2a 4>;
diff --git a/fdts/rtsm_ve-motherboard-aarch32.dtsi b/fdts/rtsm_ve-motherboard-aarch32.dtsi
index 5afbc1e..7a8af8e 100644
--- a/fdts/rtsm_ve-motherboard-aarch32.dtsi
+++ b/fdts/rtsm_ve-motherboard-aarch32.dtsi
@@ -57,14 +57,14 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg@010000 {
+ v2m_sysreg: sysreg@10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
- v2m_sysctl: sysctl@020000 {
+ v2m_sysctl: sysctl@20000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
@@ -73,7 +73,7 @@
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
};
- aaci@040000 {
+ aaci@40000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x040000 0x1000>;
interrupts = <11>;
@@ -81,7 +81,7 @@
clock-names = "apb_pclk";
};
- mmci@050000 {
+ mmci@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9 10>;
@@ -93,7 +93,7 @@
clock-names = "mclk", "apb_pclk";
};
- kmi@060000 {
+ kmi@60000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <12>;
@@ -101,7 +101,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi@070000 {
+ kmi@70000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <13>;
@@ -109,7 +109,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- v2m_serial0: uart@090000 {
+ v2m_serial0: uart@90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
@@ -117,7 +117,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a0000 {
+ v2m_serial1: uart@a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
@@ -125,7 +125,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b0000 {
+ v2m_serial2: uart@b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
@@ -133,7 +133,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c0000 {
+ v2m_serial3: uart@c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
@@ -141,7 +141,7 @@
clock-names = "uartclk", "apb_pclk";
};
- wdt@0f0000 {
+ wdt@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0>;
@@ -184,7 +184,7 @@
framebuffer = <0x18000000 0x00180000>;
};
- virtio_block@0130000 {
+ virtio_block@130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x1000>;
interrupts = <0x2a>;
diff --git a/fdts/rtsm_ve-motherboard.dtsi b/fdts/rtsm_ve-motherboard.dtsi
index 8baa829..486f8a9 100644
--- a/fdts/rtsm_ve-motherboard.dtsi
+++ b/fdts/rtsm_ve-motherboard.dtsi
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -56,14 +56,14 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg@010000 {
+ v2m_sysreg: sysreg@10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
- v2m_sysctl: sysctl@020000 {
+ v2m_sysctl: sysctl@20000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
@@ -72,7 +72,7 @@
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
};
- aaci@040000 {
+ aaci@40000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x040000 0x1000>;
interrupts = <0 11 4>;
@@ -80,7 +80,7 @@
clock-names = "apb_pclk";
};
- mmci@050000 {
+ mmci@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <0 9 4 0 10 4>;
@@ -92,7 +92,7 @@
clock-names = "mclk", "apb_pclk";
};
- kmi@060000 {
+ kmi@60000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <0 12 4>;
@@ -100,7 +100,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi@070000 {
+ kmi@70000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <0 13 4>;
@@ -108,7 +108,7 @@
clock-names = "KMIREFCLK", "apb_pclk";
};
- v2m_serial0: uart@090000 {
+ v2m_serial0: uart@90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <0 5 4>;
@@ -116,7 +116,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a0000 {
+ v2m_serial1: uart@a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <0 6 4>;
@@ -124,7 +124,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b0000 {
+ v2m_serial2: uart@b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <0 7 4>;
@@ -132,7 +132,7 @@
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c0000 {
+ v2m_serial3: uart@c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <0 8 4>;
@@ -140,7 +140,7 @@
clock-names = "uartclk", "apb_pclk";
};
- wdt@0f0000 {
+ wdt@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0 0 4>;
@@ -183,14 +183,14 @@
framebuffer = <0x18000000 0x00180000>;
};
- virtio_block@0130000 {
+ virtio_block@130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x1000>;
interrupts = <0 0x2a 4>;
};
};
- v2m_fixed_3v3: fixedregulator@0 {
+ v2m_fixed_3v3: fixedregulator {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
@@ -202,7 +202,7 @@
compatible = "arm,vexpress,config-bus", "simple-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- v2m_oscclk1: osc@1 {
+ v2m_oscclk1: osc {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
@@ -220,7 +220,7 @@
* };
*/
- muxfpga@0 {
+ muxfpga {
compatible = "arm,vexpress-muxfpga";
arm,vexpress-sysreg,func = <7 0>;
};
@@ -243,7 +243,7 @@
* };
*/
- dvimode@0 {
+ dvimode {
compatible = "arm,vexpress-dvimode";
arm,vexpress-sysreg,func = <11 0>;
};