Merge "Add Matterhorn CPU lib" into integration
diff --git a/Makefile b/Makefile
index 7e41678..547b584 100644
--- a/Makefile
+++ b/Makefile
@@ -207,9 +207,10 @@
CPP = $(CC) -E $(TF_CFLAGS_$(ARCH))
PP = $(CC) -E $(TF_CFLAGS_$(ARCH))
else ifneq ($(findstring clang,$(notdir $(CC))),)
+CLANG_CCDIR = $(if $(filter-out ./,$(dir $(CC))),$(dir $(CC)),)
TF_CFLAGS_aarch32 = $(target32-directive) $(march32-directive)
TF_CFLAGS_aarch64 = -target aarch64-elf $(march64-directive)
-LD = ld.lld
+LD = $(CLANG_CCDIR)ld.lld
ifeq (, $(shell which $(LD)))
$(error "No $(LD) in PATH, make sure it is installed or set LD to a different linker")
endif
diff --git a/bl1/bl1.ld.S b/bl1/bl1.ld.S
index 877af8e..b20859b 100644
--- a/bl1/bl1.ld.S
+++ b/bl1/bl1.ld.S
@@ -65,8 +65,13 @@
* No need to pad out the .rodata section to a page boundary. Next is
* the .data section, which can mapped in ROM with the same memory
* attributes as the .rodata section.
+ *
+ * Pad out to 16 bytes though as .data section needs to be 16 byte
+ * aligned and lld does not align the LMA to the aligment specified
+ * on the .data section.
*/
__RODATA_END__ = .;
+ . = ALIGN(16);
} >ROM
#else
ro . : {
@@ -92,6 +97,13 @@
*(.vectors)
__RO_END__ = .;
+
+ /*
+ * Pad out to 16 bytes as .data section needs to be 16 byte aligned and
+ * lld does not align the LMA to the aligment specified on the .data
+ * section.
+ */
+ . = ALIGN(16);
} >ROM
#endif
diff --git a/bl1/bl1_fwu.c b/bl1/bl1_fwu.c
index 48f08d2..42a3ded 100644
--- a/bl1/bl1_fwu.c
+++ b/bl1/bl1_fwu.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -55,11 +55,11 @@
/*******************************************************************************
* Top level handler for servicing FWU SMCs.
******************************************************************************/
-register_t bl1_fwu_smc_handler(unsigned int smc_fid,
- register_t x1,
- register_t x2,
- register_t x3,
- register_t x4,
+u_register_t bl1_fwu_smc_handler(unsigned int smc_fid,
+ u_register_t x1,
+ u_register_t x2,
+ u_register_t x3,
+ u_register_t x4,
void *cookie,
void *handle,
unsigned int flags)
@@ -76,7 +76,7 @@
SMC_RET1(handle, bl1_fwu_image_execute(x1, &handle, flags));
case FWU_SMC_IMAGE_RESUME:
- SMC_RET1(handle, bl1_fwu_image_resume(x1, &handle, flags));
+ SMC_RET1(handle, bl1_fwu_image_resume((register_t)x1, &handle, flags));
case FWU_SMC_SEC_IMAGE_DONE:
SMC_RET1(handle, bl1_fwu_sec_image_done(&handle, flags));
diff --git a/bl1/bl1_main.c b/bl1/bl1_main.c
index bff8d22..e11ead6 100644
--- a/bl1/bl1_main.c
+++ b/bl1/bl1_main.c
@@ -226,11 +226,11 @@
/*******************************************************************************
* Top level handler for servicing BL1 SMCs.
******************************************************************************/
-register_t bl1_smc_handler(unsigned int smc_fid,
- register_t x1,
- register_t x2,
- register_t x3,
- register_t x4,
+u_register_t bl1_smc_handler(unsigned int smc_fid,
+ u_register_t x1,
+ u_register_t x2,
+ u_register_t x3,
+ u_register_t x4,
void *cookie,
void *handle,
unsigned int flags)
@@ -269,12 +269,12 @@
* BL1 SMC wrapper. This function is only used in AArch32 mode to ensure ABI
* compliance when invoking bl1_smc_handler.
******************************************************************************/
-register_t bl1_smc_wrapper(uint32_t smc_fid,
+u_register_t bl1_smc_wrapper(uint32_t smc_fid,
void *cookie,
void *handle,
unsigned int flags)
{
- register_t x1, x2, x3, x4;
+ u_register_t x1, x2, x3, x4;
assert(handle != NULL);
diff --git a/bl1/bl1_private.h b/bl1/bl1_private.h
index 927c7b8..2cfeeea 100644
--- a/bl1/bl1_private.h
+++ b/bl1/bl1_private.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -19,11 +19,11 @@
void bl1_prepare_next_image(unsigned int image_id);
-register_t bl1_fwu_smc_handler(unsigned int smc_fid,
- register_t x1,
- register_t x2,
- register_t x3,
- register_t x4,
+u_register_t bl1_fwu_smc_handler(unsigned int smc_fid,
+ u_register_t x1,
+ u_register_t x2,
+ u_register_t x3,
+ u_register_t x4,
void *cookie,
void *handle,
unsigned int flags);
diff --git a/docs/components/debugfs-design.rst b/docs/components/debugfs-design.rst
index 06916f3..8ce1ba6 100644
--- a/docs/components/debugfs-design.rst
+++ b/docs/components/debugfs-design.rst
@@ -15,8 +15,9 @@
------------------
The core functionality lies in a virtual file system based on a 9p file server
-interface (`Notes on the Plan 9 Kernel Source`_). The implementation permits
-exposing virtual files, firmware drivers, and file blobs.
+interface (`Notes on the Plan 9 Kernel Source`_ and
+`Linux 9p remote filesystem protocol`_).
+The implementation permits exposing virtual files, firmware drivers, and file blobs.
Namespace
~~~~~~~~~
@@ -77,10 +78,10 @@
-------------
The communication with the 9p layer in BL31 is made through an SMC conduit
-(`SMC Calling Convention PDD`_), using a specific SiP Function Id. An NS shared
-buffer is used to pass path string parameters, or e.g. to exchange data on a
-read operation. Refer to `ARM SiP Services`_ for a description of the SMC
-interface.
+(`SMC Calling Convention PDD`_), using a specific SiP Function Id. An NS
+shared buffer is used to pass path string parameters, or e.g. to exchange
+data on a read operation. Refer to `ARM SiP Services`_ for a description
+of the SMC interface.
Security considerations
-----------------------
@@ -114,17 +115,9 @@
- a Linux kernel driver running at NS-EL1
- a Linux userspace application through the kernel driver
-References
-----------
-
-.. [#] `SMC Calling Convention PDD`_
-.. [#] `Notes on the Plan 9 Kernel Source`_
-.. [#] `Linux 9p remote filesystem protocol`_
-.. [#] `ARM SiP Services`_
-
--------------
-*Copyright (c) 2019, Arm Limited and Contributors. All rights reserved.*
+*Copyright (c) 2019-2020, Arm Limited and Contributors. All rights reserved.*
.. _SMC Calling Convention PDD: http://infocenter.arm.com/help/topic/com.arm.doc.den0028b/
.. _Notes on the Plan 9 Kernel Source: http://lsub.org/who/nemo/9.pdf
diff --git a/docs/components/index.rst b/docs/components/index.rst
index 6a6b1b0..ae78b2b 100644
--- a/docs/components/index.rst
+++ b/docs/components/index.rst
@@ -8,6 +8,7 @@
spd/index
arm-sip-service
+ debugfs-design
exception-handling
fconf
firmware-update
diff --git a/docs/design/cpu-specific-build-macros.rst b/docs/design/cpu-specific-build-macros.rst
index f3096b4..258f73d 100644
--- a/docs/design/cpu-specific-build-macros.rst
+++ b/docs/design/cpu-specific-build-macros.rst
@@ -324,6 +324,13 @@
as recommended in section "4.7 Non-Temporal Loads/Stores" of the
`Cortex-A57 Software Optimization Guide`_.
+- ''A57_ENABLE_NON_CACHEABLE_LOAD_FWD'': This flag enables non-cacheable
+ streaming enhancement feature for Cortex-A57 CPUs. Platforms can set
+ this bit only if their memory system meets the requirement that cache
+ line fill requests from the Cortex-A57 processor are atomic. Each
+ Cortex-A57 based platform must make its own decision on whether to use
+ the optimization. This flag is disabled by default.
+
- ``NEOVERSE_N1_EXTERNAL_LLC``: This flag indicates that an external last
level cache(LLC) is present in the system, and that the DataSource field
on the master CHI interface indicates when data is returned from the LLC.
diff --git a/docs/design/firmware-design.rst b/docs/design/firmware-design.rst
index 5fc1335..d0d6ef6 100644
--- a/docs/design/firmware-design.rst
+++ b/docs/design/firmware-design.rst
@@ -2696,13 +2696,13 @@
--------------
-*Copyright (c) 2013-2019, Arm Limited and Contributors. All rights reserved.*
+*Copyright (c) 2013-2020, Arm Limited and Contributors. All rights reserved.*
.. _Power State Coordination Interface PDD: http://infocenter.arm.com/help/topic/com.arm.doc.den0022d/Power_State_Coordination_Interface_PDD_v1_1_DEN0022D.pdf
.. _SMCCC: http://infocenter.arm.com/help/topic/com.arm.doc.den0028b/ARM_DEN0028B_SMC_Calling_Convention.pdf
.. _PSCI: http://infocenter.arm.com/help/topic/com.arm.doc.den0022d/Power_State_Coordination_Interface_PDD_v1_1_DEN0022D.pdf
.. _Power State Coordination Interface PDD: http://infocenter.arm.com/help/topic/com.arm.doc.den0022d/Power_State_Coordination_Interface_PDD_v1_1_DEN0022D.pdf
-.. _Arm ARM: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0487a.e/index.html
+.. _Arm ARM: https://developer.arm.com/docs/ddi0487/latest
.. _SMC Calling Convention PDD: http://infocenter.arm.com/help/topic/com.arm.doc.den0028b/ARM_DEN0028B_SMC_Calling_Convention.pdf
.. _Trusted Board Boot Requirements CLIENT (TBBR-CLIENT) Armv8-A (ARM DEN0006D): https://developer.arm.com/docs/den0006/latest/trusted-board-boot-requirements-client-tbbr-client-armv8-a
diff --git a/docs/perf/index.rst b/docs/perf/index.rst
index 0f49b48..1482b80 100644
--- a/docs/perf/index.rst
+++ b/docs/perf/index.rst
@@ -8,7 +8,8 @@
psci-performance-juno
tsp
+ performance-monitoring-unit
--------------
-*Copyright (c) 2019, Arm Limited. All rights reserved.*
+*Copyright (c) 2019-2020, Arm Limited. All rights reserved.*
diff --git a/docs/perf/performance-monitoring-unit.rst b/docs/perf/performance-monitoring-unit.rst
new file mode 100644
index 0000000..5dd1af5
--- /dev/null
+++ b/docs/perf/performance-monitoring-unit.rst
@@ -0,0 +1,158 @@
+Performance Monitoring Unit
+===========================
+
+The Performance Monitoring Unit (PMU) allows recording of architectural and
+microarchitectural events for profiling purposes.
+
+This document gives an overview of the PMU counter configuration to assist with
+implementation and to complement the PMU security guidelines given in the
+:ref:`Secure Development Guidelines` document.
+
+.. note::
+ This section applies to Armv8-A implementations which have version 3
+ of the Performance Monitors Extension (PMUv3).
+
+PMU Counters
+------------
+
+The PMU makes 32 counters available at all privilege levels:
+
+- 31 programmable event counters: ``PMEVCNTR<n>``, where ``n`` is ``0`` to
+ ``30``.
+- A dedicated cycle counter: ``PMCCNTR``.
+
+Architectural mappings
+~~~~~~~~~~~~~~~~~~~~~~
+
++--------------+---------+----------------------------+
+| Counters | State | System Register Name |
++==============+=========+============================+
+| | AArch64 | ``PMEVCNTR<n>_EL0[63*:0]`` |
+| Programmable +---------+----------------------------+
+| | AArch32 | ``PMEVCNTR<n>[31:0]`` |
++--------------+---------+----------------------------+
+| | AArch64 | ``PMCCNTR_EL0[63:0]`` |
+| Cycle +---------+----------------------------+
+| | AArch32 | ``PMCCNTR[63:0]`` |
++--------------+---------+----------------------------+
+
+.. note::
+ Bits [63:32] are only available if ARMv8.5-PMU is implemented. Refer to the
+ `Arm ARM`_ for a detailed description of ARMv8.5-PMU features.
+
+Configuring the PMU for counting events
+---------------------------------------
+
+Each programmable counter has an associated register, ``PMEVTYPER<n>`` which
+configures it. The cycle counter has the ``PMCCFILTR_EL0`` register, which has
+an identical function and bit field layout as ``PMEVTYPER<n>``. In addition,
+the counters are enabled (permitted to increment) via the ``PMCNTENSET`` and
+``PMCR`` registers. These can be accessed at all privilege levels.
+
+Architectural mappings
+~~~~~~~~~~~~~~~~~~~~~~
+
++-----------------------------+------------------------+
+| AArch64 | AArch32 |
++=============================+========================+
+| ``PMEVTYPER<n>_EL0[63*:0]`` | ``PMEVTYPER<n>[31:0]`` |
++-----------------------------+------------------------+
+| ``PMCCFILTR_EL0[63*:0]`` | ``PMCCFILTR[31:0]`` |
++-----------------------------+------------------------+
+| ``PMCNTENSET_EL0[63*:0]`` | ``PMCNTENSET[31:0]`` |
++-----------------------------+------------------------+
+| ``PMCR_EL0[63*:0]`` | ``PMCR[31:0]`` |
++-----------------------------+------------------------+
+
+.. note::
+ Bits [63:32] are reserved.
+
+Relevant register fields
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+For ``PMEVTYPER<n>_EL0``/``PMEVTYPER<n>`` and ``PMCCFILTR_EL0/PMCCFILTR``, the
+most important fields are:
+
+- ``P``:
+
+ - Bit 31.
+ - If set to ``0``, will increment the associated ``PMEVCNTR<n>`` at EL1.
+
+- ``NSK``:
+
+ - Bit 29.
+ - If equal to the ``P`` bit it enables the associated ``PMEVCNTR<n>`` at
+ Non-secure EL1.
+ - Reserved if EL3 not implemented.
+
+- ``NSH``:
+
+ - Bit 27.
+ - If set to ``1``, will increment the associated ``PMEVCNTR<n>`` at EL2.
+ - Reserved if EL2 not implemented.
+
+- ``SH``:
+
+ - Bit 24.
+ - If different to the ``NSH`` bit it enables the associated ``PMEVCNTR<n>``
+ at Secure EL2.
+ - Reserved if Secure EL2 not implemented.
+
+- ``M``:
+
+ - Bit 26.
+ - If equal to the ``P`` bit it enables the associated ``PMEVCNTR<n>`` at
+ EL3.
+
+- ``evtCount[15:10]``:
+
+ - Extension to ``evtCount[9:0]``. Reserved unless ARMv8.1-PMU implemented.
+
+- ``evtCount[9:0]``:
+
+ - The event number that the associated ``PMEVCNTR<n>`` will count.
+
+For ``PMCNTENSET_EL0``/``PMCNTENSET``, the most important fields are:
+
+- ``P[30:0]``:
+
+ - Setting bit ``P[n]`` to ``1`` enables counter ``PMEVCNTR<n>``.
+ - The effects of ``PMEVTYPER<n>`` are applied on top of this.
+ In other words, the counter will not increment at any privilege level or
+ security state unless it is enabled here.
+
+- ``C``:
+
+ - Bit 31.
+ - If set to ``1`` enables the cycle counter ``PMCCNTR``.
+
+For ``PMCR``/``PMCR_EL0``, the most important fields are:
+
+- ``DP``:
+
+ - Bit 5.
+ - If set to ``1`` it disables the cycle counter ``PMCCNTR`` where event
+ counting (by ``PMEVCNTR<n>``) is prohibited (e.g. EL2 and the Secure
+ world).
+ - If set to ``0``, ``PMCCNTR`` will not be affected by this bit and
+ therefore will be able to count where the programmable counters are
+ prohibited.
+
+- ``E``:
+
+ - Bit 0.
+ - Enables/disables counting altogether.
+ - The effects of ``PMCNTENSET`` and ``PMCR.DP`` are applied on top of this.
+ In other words, if this bit is ``0`` then no counters will increment
+ regardless of how the other PMU system registers or bit fields are
+ configured.
+
+.. rubric:: References
+
+- `Arm ARM`_
+
+--------------
+
+*Copyright (c) 2019-2020, Arm Limited and Contributors. All rights reserved.*
+
+.. _Arm ARM: https://developer.arm.com/docs/ddi0487/latest
diff --git a/docs/plat/arm/fvp/index.rst b/docs/plat/arm/fvp/index.rst
index 37010e1..40e9661 100644
--- a/docs/plat/arm/fvp/index.rst
+++ b/docs/plat/arm/fvp/index.rst
@@ -277,15 +277,15 @@
-C cluster0.NUM_CORES=4 \
-C cluster1.NUM_CORES=4 \
-C cache_state_modelled=1 \
- -C cluster0.cpu0.RVBAR=0x04020000 \
- -C cluster0.cpu1.RVBAR=0x04020000 \
- -C cluster0.cpu2.RVBAR=0x04020000 \
- -C cluster0.cpu3.RVBAR=0x04020000 \
- -C cluster1.cpu0.RVBAR=0x04020000 \
- -C cluster1.cpu1.RVBAR=0x04020000 \
- -C cluster1.cpu2.RVBAR=0x04020000 \
- -C cluster1.cpu3.RVBAR=0x04020000 \
- --data cluster0.cpu0="<path-to>/bl31.bin"@0x04020000 \
+ -C cluster0.cpu0.RVBAR=0x04001000 \
+ -C cluster0.cpu1.RVBAR=0x04001000 \
+ -C cluster0.cpu2.RVBAR=0x04001000 \
+ -C cluster0.cpu3.RVBAR=0x04001000 \
+ -C cluster1.cpu0.RVBAR=0x04001000 \
+ -C cluster1.cpu1.RVBAR=0x04001000 \
+ -C cluster1.cpu2.RVBAR=0x04001000 \
+ -C cluster1.cpu3.RVBAR=0x04001000 \
+ --data cluster0.cpu0="<path-to>/bl31.bin"@0x04001000 \
--data cluster0.cpu0="<path-to>/<patched-fdt>"@0x82000000 \
--data cluster0.cpu0="<path-to>/<kernel-binary>"@0x80080000 \
--data cluster0.cpu0="<path-to>/<ramdisk.img>"@0x84000000
diff --git a/docs/process/security-hardening.rst b/docs/process/security-hardening.rst
index 43a5721..507046f 100644
--- a/docs/process/security-hardening.rst
+++ b/docs/process/security-hardening.rst
@@ -25,6 +25,99 @@
many normal world requests (a *Denial of Service* or *DoS* attack). It should
have a mechanism for throttling or ignoring normal world requests.
+Preventing Secure-world timing information leakage via PMU counters
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The Secure world needs to implement some defenses to prevent the Non-secure
+world from making it leak timing information. In general, higher privilege
+levels must defend from those below when the PMU is treated as an attack
+vector.
+
+Refer to the :ref:`Performance Monitoring Unit` guide for detailed information
+on the PMU registers.
+
+Timing leakage attacks from the Non-secure world
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Since the Non-secure world has access to the ``PMCR`` register, it can
+configure the PMU to increment counters at any exception level and in both
+Secure and Non-secure state. Thus, it attempts to leak timing information from
+the Secure world.
+
+Shown below is an example of such a configuration:
+
+- ``PMEVTYPER0_EL0`` and ``PMCCFILTR_EL0``:
+
+ - Set ``P`` to ``0``.
+ - Set ``NSK`` to ``1``.
+ - Set ``M`` to ``0``.
+ - Set ``NSH`` to ``0``.
+ - Set ``SH`` to ``1``.
+
+- ``PMCNTENSET_EL0``:
+
+ - Set ``P[0]`` to ``1``.
+ - Set ``C`` to ``1``.
+
+- ``PMCR_EL0``:
+
+ - Set ``DP`` to ``0``.
+ - Set ``E`` to ``1``.
+
+This configuration instructs ``PMEVCNTR0_EL0`` and ``PMCCNTR_EL0`` to increment
+at Secure EL1, Secure EL2 (if implemented) and EL3.
+
+Since the Non-secure world has fine-grained control over where (at which
+exception levels) it instructs counters to increment, obtaining event counts
+would allow it to carry out side-channel timing attacks against the Secure
+world. Examples include Spectre, Meltdown, as well as extracting secrets from
+cryptographic algorithms with data-dependent variations in their execution
+time.
+
+Secure world mitigation strategies
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The ``MDCR_EL3`` register allows EL3 to configure the PMU (among other things).
+The `Arm ARM`_ details all of the bit fields in this register, but for the PMU
+there are two bits which determine the permissions of the counters:
+
+- ``SPME`` for the programmable counters.
+- ``SCCD`` for the cycle counter.
+
+Depending on the implemented features, the Secure world can prohibit counting
+in AArch64 state via the following:
+
+- ARMv8.2-Debug not implemented:
+
+ - Prohibit general event counters and the cycle counter:
+ ``MDCR_EL3.SPME == 0 && PMCR_EL0.DP == 1 && !ExternalSecureNoninvasiveDebugEnabled()``.
+
+ - ``MDCR_EL3.SPME`` resets to ``0``, so by default general events should
+ not be counted in the Secure world.
+ - The ``PMCR_EL0.DP`` bit therefore needs to be set to ``1`` when EL3 is
+ entered and ``PMCR_EL0`` needs to be saved and restored in EL3.
+ - ``ExternalSecureNoninvasiveDebugEnabled()`` is an authentication
+ interface which is implementation-defined unless ARMv8.4-Debug is
+ implemented. The `Arm ARM`_ has detailed information on this topic.
+
+ - The only other way is to disable the ``PMCR_EL0.E`` bit upon entering
+ EL3, which disables counting altogether.
+
+- ARMv8.2-Debug implemented:
+
+ - Prohibit general event counters: ``MDCR_EL3.SPME == 0``.
+ - Prohibit cycle counter: ``MDCR_EL3.SPME == 0 && PMCR_EL0.DP == 1``.
+ ``PMCR_EL0`` therefore needs to be saved and restored in EL3.
+
+- ARMv8.5-PMU implemented:
+
+ - Prohibit general event counters: as in ARMv8.2-Debug.
+ - Prohibit cycle counter: ``MDCR_EL3.SCCD == 1``
+
+In Aarch32 execution state the ``MDCR_EL3`` alias is the ``SDCR`` register,
+which has some of the bit fields of ``MDCR_EL3``, most importantly the ``SPME``
+and ``SCCD`` bits.
+
Build options
-------------
@@ -71,6 +164,12 @@
NB: The ``Werror`` flag is enabled by default in TF-A and can be disabled by
setting the ``E`` build flag to 0.
+.. rubric:: References
+
+- `Arm ARM`_
+
--------------
*Copyright (c) 2019-2020, Arm Limited. All rights reserved.*
+
+.. _Arm ARM: https://developer.arm.com/docs/ddi0487/latest
diff --git a/drivers/auth/tbbr/tbbr_cot.c b/drivers/auth/tbbr/tbbr_cot.c
index 6dd4ae2..6f00b18 100644
--- a/drivers/auth/tbbr/tbbr_cot.c
+++ b/drivers/auth/tbbr/tbbr_cot.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -18,7 +18,12 @@
/*
- * Maximum key and hash sizes (in DER format)
+ * Maximum key and hash sizes (in DER format).
+ *
+ * Both RSA and ECDSA keys may be used at the same time. In this case, the key
+ * buffers must be big enough to hold either. As RSA keys are bigger than ECDSA
+ * ones for all key sizes we support, they impose the minimum size of these
+ * buffers.
*/
#if TF_MBEDTLS_USE_RSA
#if TF_MBEDTLS_KEY_SIZE == 1024
@@ -32,11 +37,19 @@
#else
#error "Invalid value for TF_MBEDTLS_KEY_SIZE"
#endif
-#else
-#define PK_DER_LEN 294
+#else /* Only using ECDSA keys. */
+#define PK_DER_LEN 91
#endif
+#if TF_MBEDTLS_HASH_ALG_ID == TF_MBEDTLS_SHA256
+#define HASH_DER_LEN 51
+#elif TF_MBEDTLS_HASH_ALG_ID == TF_MBEDTLS_SHA384
+#define HASH_DER_LEN 67
+#elif TF_MBEDTLS_HASH_ALG_ID == TF_MBEDTLS_SHA512
#define HASH_DER_LEN 83
+#else
+#error "Invalid value for TF_MBEDTLS_HASH_ALG_ID"
+#endif
/*
* The platform must allocate buffers to store the authentication parameters
diff --git a/drivers/cfi/v2m/v2m_flash.c b/drivers/cfi/v2m/v2m_flash.c
index aadafbc..6690189 100644
--- a/drivers/cfi/v2m/v2m_flash.c
+++ b/drivers/cfi/v2m/v2m_flash.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -27,7 +27,7 @@
#define DWS_WORD_LOCK_RETRIES 1000
/* Helper macro to detect end of command */
-#define NOR_CMD_END (NOR_DWS | NOR_DWS << 16l)
+#define NOR_CMD_END (NOR_DWS | (NOR_DWS << 16l))
/* Helper macros to access two flash banks in parallel */
#define NOR_2X16(d) ((d << 16) | (d & 0xffff))
diff --git a/drivers/delay_timer/generic_delay_timer.c b/drivers/delay_timer/generic_delay_timer.c
index 3d0a11f..ca522e0 100644
--- a/drivers/delay_timer/generic_delay_timer.c
+++ b/drivers/delay_timer/generic_delay_timer.c
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020, NVIDIA Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -12,11 +13,9 @@
#include <common/debug.h>
#include <drivers/delay_timer.h>
#include <drivers/generic_delay_timer.h>
+#include <lib/utils_def.h>
#include <plat/common/platform.h>
-/* Ticks elapsed in one second by a signal of 1 MHz */
-#define MHZ_TICKS_PER_SEC 1000000
-
static timer_ops_t ops;
static uint32_t get_timer_value(void)
diff --git a/drivers/marvell/mochi/cp110_setup.c b/drivers/marvell/mochi/cp110_setup.c
index b4b4e0c..7186f98 100644
--- a/drivers/marvell/mochi/cp110_setup.c
+++ b/drivers/marvell/mochi/cp110_setup.c
@@ -303,7 +303,7 @@
DOMAIN_SYSTEM_SHAREABLE);
}
-static void amb_bridge_init(uintptr_t base)
+void cp110_amb_init(uintptr_t base)
{
uint32_t reg;
@@ -399,7 +399,7 @@
cp110_stream_id_init(cp110_base, stream_id);
/* Open AMB bridge for comphy for CP0 & CP1*/
- amb_bridge_init(cp110_base);
+ cp110_amb_init(cp110_base);
/* Reset RTC if needed */
cp110_rtc_init(cp110_base);
@@ -411,7 +411,7 @@
#if PCI_EP_SUPPORT
INFO("%s: Initialize CPx - base = %lx\n", __func__, cp110_base);
- amb_bridge_init(cp110_base);
+ cp110_amb_init(cp110_base);
/* Configure PCIe clock */
cp110_pcie_clk_cfg(cp110_base);
diff --git a/drivers/renesas/rcar/board/board.c b/drivers/renesas/rcar/board/board.c
index df17802..cd194ff 100644
--- a/drivers/renesas/rcar/board/board.c
+++ b/drivers/renesas/rcar/board/board.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights
* reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
@@ -33,7 +33,7 @@
#define SXS_ID { 0x10U, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU }
#define SX_ID { 0x10U, 0x11U, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU }
#define SKP_ID { 0x10U, 0x10U, 0x20U, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU }
-#define SK_ID { 0x10U, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU }
+#define SK_ID { 0x10U, 0x30U, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU }
#define EB4_ID { 0x10U, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU }
#define EB_ID { 0x10U, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU }
#define DR_ID { 0x10U, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU }
diff --git a/drivers/renesas/rcar/ddr/ddr_b/boot_init_dram.c b/drivers/renesas/rcar/ddr/ddr_b/boot_init_dram.c
index 1d6e83a..ac83c9a 100644
--- a/drivers/renesas/rcar/ddr/ddr_b/boot_init_dram.c
+++ b/drivers/renesas/rcar/ddr/ddr_b/boot_init_dram.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2019, Renesas Electronics Corporation.
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation.
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
@@ -510,6 +510,14 @@
dsb_sev();
}
+static void dbwait_loop(uint32_t wait_loop)
+{
+ uint32_t i;
+
+ for (i = 0; i < wait_loop; i++)
+ wait_dbcmd();
+}
+
/* DDRPHY register access (raw) */
static uint32_t reg_ddrphy_read(uint32_t phyno, uint32_t regadd)
{
@@ -866,6 +874,7 @@
uint8_t WL;
uint8_t nwr;
uint8_t nrtp;
+ uint8_t odtlon;
uint8_t MR1;
uint8_t MR2;
};
@@ -877,21 +886,21 @@
#define JS1_MR2(f) (0x00 | ((f) << 3) | (f))
const struct _jedec_spec1 js1[JS1_FREQ_TBL_NUM] = {
/* 533.333Mbps */
- { 800, 6, 6, 4, 6, 8, JS1_MR1(0), JS1_MR2(0) | 0x40 },
+ { 800, 6, 6, 4, 6, 8, 0, JS1_MR1(0), JS1_MR2(0) | 0x40 },
/* 1066.666Mbps */
- { 1600, 10, 12, 8, 10, 8, JS1_MR1(1), JS1_MR2(1) | 0x40 },
+ { 1600, 10, 12, 8, 10, 8, 0, JS1_MR1(1), JS1_MR2(1) | 0x40 },
/* 1600.000Mbps */
- { 2400, 14, 16, 12, 16, 8, JS1_MR1(2), JS1_MR2(2) | 0x40 },
+ { 2400, 14, 16, 12, 16, 8, 6, JS1_MR1(2), JS1_MR2(2) | 0x40 },
/* 2133.333Mbps */
- { 3200, 20, 22, 10, 20, 8, JS1_MR1(3), JS1_MR2(3) },
+ { 3200, 20, 22, 10, 20, 8, 4, JS1_MR1(3), JS1_MR2(3) },
/* 2666.666Mbps */
- { 4000, 24, 28, 12, 24, 10, JS1_MR1(4), JS1_MR2(4) },
+ { 4000, 24, 28, 12, 24, 10, 4, JS1_MR1(4), JS1_MR2(4) },
/* 3200.000Mbps */
- { 4800, 28, 32, 14, 30, 12, JS1_MR1(5), JS1_MR2(5) },
+ { 4800, 28, 32, 14, 30, 12, 6, JS1_MR1(5), JS1_MR2(5) },
/* 3733.333Mbps */
- { 5600, 32, 36, 16, 34, 14, JS1_MR1(6), JS1_MR2(6) },
+ { 5600, 32, 36, 16, 34, 14, 6, JS1_MR1(6), JS1_MR2(6) },
/* 4266.666Mbps */
- { 6400, 36, 40, 18, 40, 16, JS1_MR1(7), JS1_MR2(7) }
+ { 6400, 36, 40, 18, 40, 16, 8, JS1_MR1(7), JS1_MR2(7) }
};
struct _jedec_spec2 {
@@ -921,7 +930,8 @@
#define js2_tzqcalns 19
#define js2_tzqlat 20
#define js2_tiedly 21
-#define JS2_TBLCNT 22
+#define js2_tODTon_min 22
+#define JS2_TBLCNT 23
#define js2_trcpb (JS2_TBLCNT)
#define js2_trcab (JS2_TBLCNT + 1)
@@ -954,7 +964,8 @@
/*tMRD*/ {14000, 10},
/*tZQCALns*/ {1000 * 10, 0},
/*tZQLAT*/ {30000, 10},
-/*tIEdly*/ {12500, 0}
+/*tIEdly*/ {12500, 0},
+/*tODTon_min*/ {1500, 0}
}, {
/*tSR */ {15000, 3},
/*tXP */ {7500, 3},
@@ -977,7 +988,8 @@
/*tMRD*/ {14000, 10},
/*tZQCALns*/ {1000 * 10, 0},
/*tZQLAT*/ {30000, 10},
-/*tIEdly*/ {12500, 0}
+/*tIEdly*/ {12500, 0},
+/*tODTon_min*/ {1500, 0}
}
};
@@ -1452,7 +1464,7 @@
if ((prr_product == PRR_PRODUCT_M3N) ||
(prr_product == PRR_PRODUCT_V3H)) {
ddrtbl_setval(_cnf_DDR_PHY_SLICE_REGSET,
- _reg_PHY_RDDATA_EN_OE_DLY, dataS);
+ _reg_PHY_RDDATA_EN_OE_DLY, dataS - 2);
}
ddrtbl_setval(_cnf_DDR_PI_REGSET, _reg_PI_RDLAT_ADJ_F1, RL - dataS);
@@ -1498,9 +1510,10 @@
/* DDRPHY INT START */
if ((prr_product == PRR_PRODUCT_H3) && (prr_cut <= PRR_PRODUCT_11)) {
- /* non */
+ /* non */
} else {
regif_pll_wa();
+ dbwait_loop(5);
}
/* FREQ_SEL_MULTICAST & PER_CS_TRAINING_MULTICAST SET (for safety) */
@@ -2067,12 +2080,18 @@
/* DBTR9.TRDPR : tRTP */
mmio_write_32(DBSC_DBTR(9), js2[js2_trtp]);
- /* DBTR10.TWR : nwr */
+ /* DBTR10.TWR : nWR */
mmio_write_32(DBSC_DBTR(10), js1[js1_ind].nwr);
- /* DBTR11.TRDWR : RL + tDQSCK + BL/2 + Rounddown(tRPST) - WL + tWPRE */
+ /*
+ * DBTR11.TRDWR : RL + BL / 2 + Rounddown(tRPST) + PHY_ODTLoff -
+ * odtlon + tDQSCK - tODTon,min +
+ * PCB delay (out+in) + tPHY_ODToff
+ */
mmio_write_32(DBSC_DBTR(11),
- RL + js2[js2_tdqsck] + (16 / 2) + 1 - WL + 2 + 2);
+ RL + (16 / 2) + 1 + 2 - js1[js1_ind].odtlon +
+ js2[js2_tdqsck] - js2[js2_tODTon_min] +
+ _f_scale(ddr_mbps, ddr_mbpsdiv, 1300, 0));
/* DBTR12.TWRRD : WL + 1 + BL/2 + tWTR */
data_l = WL + 1 + (16 / 2) + js2[js2_twtr];
@@ -2338,10 +2357,23 @@
}
}
if ((prr_product == PRR_PRODUCT_H3) && (prr_cut > PRR_PRODUCT_11)) {
+#if RCAR_DRAM_SPLIT == 2
+ if (board_cnf->phyvalid == 0x05) {
+ mmio_write_32(DBSC_DBTR(24),
+ (rdlat_max << 24) + (rdlat_min << 16) +
+ mmio_read_32(DBSC_DBTR(24)));
+ } else {
+ mmio_write_32(DBSC_DBTR(24),
+ ((rdlat_max * 2 - rdlat_min + 4) << 24) +
+ ((rdlat_min + 2) << 16) +
+ mmio_read_32(DBSC_DBTR(24)));
+ }
+#else /*RCAR_DRAM_SPLIT == 2 */
mmio_write_32(DBSC_DBTR(24),
((rdlat_max * 2 - rdlat_min + 4) << 24) +
((rdlat_min + 2) << 16) +
mmio_read_32(DBSC_DBTR(24)));
+#endif /*RCAR_DRAM_SPLIT == 2 */
} else {
mmio_write_32(DBSC_DBTR(24),
((rdlat_max + 2) << 24) +
@@ -2383,37 +2415,6 @@
mmio_write_32(DBSC_DBRFCNF1, 0x00080000 | (data_l & 0x0000ffff));
mmio_write_32(DBSC_DBRFCNF2, 0x00010000 | DBSC_REFINTS);
-#ifdef DDR_BACKUPMODE
- if (ddr_backup == DRAM_BOOT_STATUS_WARM) {
-#ifdef DDR_BACKUPMODE_HALF /* for Half channel(ch0,1 only) */
- DEBUG(" DEBUG_MESS : DDR_BACKUPMODE_HALF ", 1);
- send_dbcmd(0x08040001);
- wait_dbcmd();
- send_dbcmd(0x0A040001);
- wait_dbcmd();
- send_dbcmd(0x04040010);
- wait_dbcmd();
-
- if (prr_product == PRR_PRODUCT_H3) {
- send_dbcmd(0x08140001);
- wait_dbcmd();
- send_dbcmd(0x0A140001);
- wait_dbcmd();
- send_dbcmd(0x04140010);
- wait_dbcmd();
- }
-#else /* DDR_BACKUPMODE_HALF //for All channels */
- send_dbcmd(0x08840001);
- wait_dbcmd();
- send_dbcmd(0x0A840001);
- wait_dbcmd();
-
- send_dbcmd(0x04840010);
- wait_dbcmd();
-#endif /* DDR_BACKUPMODE_HALF */
- }
-#endif /* DDR_BACKUPMODE */
-
#if RCAR_REWT_TRAINING != 0
/* Periodic-WriteDQ Training seeting */
if (((prr_product == PRR_PRODUCT_H3) &&
@@ -2422,12 +2423,7 @@
(prr_cut == PRR_PRODUCT_10))) {
/* non : H3 Ver.1.x/M3-W Ver.1.0 not support */
} else {
- /*
- * H3 Ver.2.0 or later/M3-W Ver.1.1 or
- * later/M3-N/V3H -> Periodic-WriteDQ Training seeting
- */
-
- /* Periodic WriteDQ Training seeting */
+ /* H3 Ver.2.0 or later/M3-W Ver.1.1 or later/M3-N/V3H */
mmio_write_32(DBSC_DBDFIPMSTRCNF, 0x00000000);
ddr_setval_ach_as(_reg_PHY_WDQLVL_PATT, 0x04);
@@ -2440,7 +2436,6 @@
_reg_PI_WDQLVL_CS_MAP));
ddr_setval_ach(_reg_PI_LONG_COUNT_MASK, 0x1f);
ddr_setval_ach(_reg_PI_WDQLVL_VREF_EN, 0x00);
- ddr_setval_ach(_reg_PI_WDQLVL_INTERVAL, 0x0100);
ddr_setval_ach(_reg_PI_WDQLVL_ROTATE, 0x01);
ddr_setval_ach(_reg_PI_TREF_F0, 0x0000);
ddr_setval_ach(_reg_PI_TREF_F1, 0x0000);
@@ -2458,8 +2453,10 @@
mmio_write_32(DBSC_DBDFIPMSTRCNF, 0x00000011);
}
#endif /* RCAR_REWT_TRAINING */
- /* periodic dram zqcal and phy ctrl update enable */
+ /* periodic dram zqcal enable */
mmio_write_32(DBSC_DBCALCNF, 0x01000010);
+
+ /* periodic phy ctrl update enable */
if (((prr_product == PRR_PRODUCT_H3) &&
(prr_cut <= PRR_PRODUCT_11)) ||
((prr_product == PRR_PRODUCT_M3) &&
@@ -2477,7 +2474,36 @@
#endif /* RCAR_DRAM_SPLIT == 2 */
}
+#ifdef DDR_BACKUPMODE
+ /* SRX */
+ if (ddr_backup == DRAM_BOOT_STATUS_WARM) {
+#ifdef DDR_BACKUPMODE_HALF /* for Half channel(ch0, 1 only) */
+ NOTICE("BL2: [DEBUG_MESS] DDR_BACKUPMODE_HALF\n");
+ send_dbcmd(0x0A040001);
+ if (Prr_Product == PRR_PRODUCT_H3)
+ send_dbcmd(0x0A140001);
+#else /* DDR_BACKUPMODE_HALF */ /* for All channels */
+ send_dbcmd(0x0A840001);
+#endif /* DDR_BACKUPMODE_HALF */
+ }
+#endif /* DDR_BACKUPMODE */
+
+ /* set Auto Refresh */
mmio_write_32(DBSC_DBRFEN, 0x00000001);
+
+#if RCAR_REWT_TRAINING != 0
+ /* Periodic WriteDQ Traning */
+ if (((prr_product == PRR_PRODUCT_H3) &&
+ (prr_cut <= PRR_PRODUCT_11)) ||
+ ((prr_product == PRR_PRODUCT_M3) &&
+ (prr_cut == PRR_PRODUCT_10))) {
+ /* non : H3 Ver.1.x/M3-W Ver.1.0 not support */
+ } else {
+ /* H3 Ver.2.0 or later/M3-W Ver.1.1 or later/M3-N/V3H */
+ ddr_setval_ach(_reg_PI_WDQLVL_INTERVAL, 0x0100);
+ }
+#endif /* RCAR_REWT_TRAINING */
+
/* dram access enable */
mmio_write_32(DBSC_DBACEN, 0x00000001);
@@ -3026,6 +3052,9 @@
return INITDRAM_ERR_O;
MSG_LF(__func__ ":5\n");
+ /* Dummy PDE */
+ send_dbcmd(0x08840000);
+
/* PDX */
send_dbcmd(0x08840001);
@@ -3477,10 +3506,13 @@
{
uint32_t err, retry_cnt;
const uint32_t retry_max = 0x10;
- uint32_t ch, ddr_csn, mr14_bkup[4][4];
+ uint32_t datal, ch, ddr_csn, mr14_bkup[4][4];
+
+ datal = RL + js2[js2_tdqsck] + (16 / 2) + 1 - WL + 2 + 2 + 19;
+ if ((mmio_read_32(DBSC_DBTR(11)) & 0xFF) > datal)
+ datal = mmio_read_32(DBSC_DBTR(11)) & 0xFF;
+ ddr_setval_ach(_reg_PI_TDFI_WDQLVL_RW, datal);
- ddr_setval_ach(_reg_PI_TDFI_WDQLVL_RW,
- (mmio_read_32(DBSC_DBTR(11)) & 0xFF) + 19);
if (((prr_product == PRR_PRODUCT_H3) && (prr_cut > PRR_PRODUCT_11)) ||
(prr_product == PRR_PRODUCT_M3N) ||
(prr_product == PRR_PRODUCT_V3H)) {
diff --git a/drivers/renesas/rcar/ddr/ddr_b/boot_init_dram_config.c b/drivers/renesas/rcar/ddr/ddr_b/boot_init_dram_config.c
index f8caade..de126de 100644
--- a/drivers/renesas/rcar/ddr/ddr_b/boot_init_dram_config.c
+++ b/drivers/renesas/rcar/ddr/ddr_b/boot_init_dram_config.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2019, Renesas Electronics Corporation.
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation.
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
@@ -1571,8 +1571,13 @@
{
uint32_t md;
- md = (mmio_read_32(RST_MODEMR) >> 17) & 0x5;
- md = (md | (md >> 1)) & 0x3;
+ if (prr_product == PRR_PRODUCT_V3H) {
+ md = (mmio_read_32(RST_MODEMR) >> 19) & 0x1;
+ md = (md | (md << 1)) & 0x3; /* 0 or 3 */
+ } else {
+ md = (mmio_read_32(RST_MODEMR) >> 17) & 0x5;
+ md = (md | (md >> 1)) & 0x3;
+ }
switch (md) {
case 0x0:
*mbps = 3200;
@@ -1722,8 +1727,13 @@
#endif
}
} else if (prr_product == PRR_PRODUCT_M3) {
- /* RENESAS Starter Kit(M3-W/SIP 8Gbit 1rank) board */
- brd = 3;
+ if (prr_cut >= PRR_PRODUCT_30) {
+ /* RENESAS Starter Kit (M3-W Ver.3.0/SIP) */
+ brd = 18;
+ } else {
+ /* RENESAS Starter Kit(M3-W/SIP 8Gbit 1rank) board */
+ brd = 3;
+ }
} else {
/* RENESAS Starter Kit(M3-N/SIP) board */
brd = 11;
diff --git a/drivers/renesas/rcar/ddr/ddr_b/boot_init_dram_regdef.h b/drivers/renesas/rcar/ddr/ddr_b/boot_init_dram_regdef.h
index 5047e5c..56363eb 100644
--- a/drivers/renesas/rcar/ddr/ddr_b/boot_init_dram_regdef.h
+++ b/drivers/renesas/rcar/ddr/ddr_b/boot_init_dram_regdef.h
@@ -1,11 +1,11 @@
/*
- * Copyright (c) 2015-2019, Renesas Electronics Corporation.
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation.
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
-#define RCAR_DDR_VERSION "rev.0.37"
+#define RCAR_DDR_VERSION "rev.0.40"
#define DRAM_CH_CNT 0x04
#define SLICE_CNT 0x04
#define CS_CNT 0x02
@@ -22,7 +22,7 @@
/* for ddr deisity setting */
#define DBMEMCONF_REG(d3, row, bank, col, dw) \
- ((d3) << 30 | ((row) << 24) | ((bank) << 16) | ((col) << 8) | (dw))
+ (((d3) << 30) | ((row) << 24) | ((bank) << 16) | ((col) << 8) | (dw))
#define DBMEMCONF_REGD(density) \
(DBMEMCONF_REG((density) % 2, ((density) + 1) / \
diff --git a/drivers/renesas/rcar/ddr/ddr_b/init_dram_tbl_m3n.h b/drivers/renesas/rcar/ddr/ddr_b/init_dram_tbl_m3n.h
index 8d80842..fb3032d 100644
--- a/drivers/renesas/rcar/ddr/ddr_b/init_dram_tbl_m3n.h
+++ b/drivers/renesas/rcar/ddr/ddr_b/init_dram_tbl_m3n.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2019, Renesas Electronics Corporation.
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation.
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
@@ -116,7 +116,7 @@
/*0859*/ 0x00000200,
/*085a*/ 0x00000004,
/*085b*/ 0x4041a151,
- /*085c*/ 0x0141c0a0,
+ /*085c*/ 0x0141a0a0,
/*085d*/ 0x0000c0c0,
/*085e*/ 0x0e0c000e,
/*085f*/ 0x10001000,
diff --git a/fdts/corstone700.dts b/fdts/corstone700.dts
index 16cf412..c13d3b2 100644
--- a/fdts/corstone700.dts
+++ b/fdts/corstone700.dts
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2019, Arm Limited and Contributors. All rights reserved.
+ * Copyright (c) 2019-2020, Arm Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -14,9 +14,10 @@
#size-cells = <1>;
chosen {
- bootargs = "console=ttyAMA0 root=/dev/vda2 rw loglevel=9";
- linux,initrd-start = <0x02a00000>;
- linux,initrd-end = <0x04000000>;
+ bootargs = "console=ttyAMA0 \
+ root=mtd:physmap-flash.0 \
+ ro \
+ loglevel=9";
};
cpus {
@@ -32,9 +33,9 @@
};
- memory@2000000 {
+ memory@80000000 {
device_type = "memory";
- reg = <0x02000000 0x02000000>;
+ reg = <0x80000000 0x80000000>;
};
gic: interrupt-controller@1c000000 {
@@ -68,14 +69,21 @@
clock-output-names = "smclk";
};
+ uartclk: uartclk {
+ /* UART clock - 32MHz */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000000>;
+ clock-output-names = "uartclk";
+ };
serial0: uart@1a510000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x1a510000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 19 4>;
- clocks = <&refclk100mhz>, <&smbclk>;
- clock-names = "apb_pclk", "smclk";
+ clocks = <&uartclk>, <&refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
};
serial1: uart@1a520000 {
@@ -83,8 +91,8 @@
reg = <0x1a520000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 20 4>;
- clocks = <&refclk100mhz>, <&smbclk>;
- clock-names = "apb_pclk", "smclk";
+ clocks = <&uartclk>, <&refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
};
timer {
diff --git a/fdts/fvp-base-gicv3-psci-common.dtsi b/fdts/fvp-base-gicv3-psci-common.dtsi
index 94ed67d..5b0470d 100644
--- a/fdts/fvp-base-gicv3-psci-common.dtsi
+++ b/fdts/fvp-base-gicv3-psci-common.dtsi
@@ -39,7 +39,7 @@
#address-cells = <2>;
#size-cells = <0>;
- cpu-map {
+ CPU_MAP:cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
diff --git a/fdts/fvp-base-gicv3-psci-dynamiq-2t.dts b/fdts/fvp-base-gicv3-psci-dynamiq-2t.dts
index 48269a0..daa2e66 100644
--- a/fdts/fvp-base-gicv3-psci-dynamiq-2t.dts
+++ b/fdts/fvp-base-gicv3-psci-dynamiq-2t.dts
@@ -6,7 +6,7 @@
/dts-v1/;
-#include "fvp-base-gicv3-psci-common.dtsi"
+#include "fvp-base-gicv3-psci-dynamiq-common.dtsi"
&CPU0 {
reg = <0x0 0x0>;
diff --git a/fdts/fvp-base-gicv3-psci-dynamiq-common.dtsi b/fdts/fvp-base-gicv3-psci-dynamiq-common.dtsi
new file mode 100644
index 0000000..f3f7684
--- /dev/null
+++ b/fdts/fvp-base-gicv3-psci-dynamiq-common.dtsi
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+#include "fvp-base-gicv3-psci-common.dtsi"
+
+/* DynamIQ based designs have upto 8 CPUs in each cluster */
+
+&CPU_MAP {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ core4 {
+ cpu = <&CPU4>;
+ };
+ core5 {
+ cpu = <&CPU5>;
+ };
+ core6 {
+ cpu = <&CPU6>;
+ };
+ core7 {
+ cpu = <&CPU7>;
+ };
+ };
+};
diff --git a/fdts/fvp-base-gicv3-psci-dynamiq.dts b/fdts/fvp-base-gicv3-psci-dynamiq.dts
index 51c7aca..b8b0445 100644
--- a/fdts/fvp-base-gicv3-psci-dynamiq.dts
+++ b/fdts/fvp-base-gicv3-psci-dynamiq.dts
@@ -6,7 +6,7 @@
/dts-v1/;
-#include "fvp-base-gicv3-psci-common.dtsi"
+#include "fvp-base-gicv3-psci-dynamiq-common.dtsi"
&CPU0 {
reg = <0x0 0x0>;
diff --git a/include/arch/aarch64/arch.h b/include/arch/aarch64/arch.h
index 1fcd0f9..1faddbe 100644
--- a/include/arch/aarch64/arch.h
+++ b/include/arch/aarch64/arch.h
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020, NVIDIA Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -597,6 +598,10 @@
#define CNTP_CTL_IMASK_MASK U(1)
#define CNTP_CTL_ISTATUS_MASK U(1)
+/* Physical timer control macros */
+#define CNTP_CTL_ENABLE_BIT (U(1) << CNTP_CTL_ENABLE_SHIFT)
+#define CNTP_CTL_IMASK_BIT (U(1) << CNTP_CTL_IMASK_SHIFT)
+
/* Exception Syndrome register bits and bobs */
#define ESR_EC_SHIFT U(26)
#define ESR_EC_MASK U(0x3f)
diff --git a/include/bl1/bl1.h b/include/bl1/bl1.h
index d81f434..e6447f2 100644
--- a/include/bl1/bl1.h
+++ b/include/bl1/bl1.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -67,16 +67,16 @@
struct entry_point_info;
-register_t bl1_smc_wrapper(uint32_t smc_fid,
+u_register_t bl1_smc_wrapper(uint32_t smc_fid,
void *cookie,
void *handle,
unsigned int flags);
-register_t bl1_smc_handler(unsigned int smc_fid,
- register_t x1,
- register_t x2,
- register_t x3,
- register_t x4,
+u_register_t bl1_smc_handler(unsigned int smc_fid,
+ u_register_t x1,
+ u_register_t x2,
+ u_register_t x3,
+ u_register_t x4,
void *cookie,
void *handle,
unsigned int flags);
diff --git a/include/drivers/marvell/mochi/cp110_setup.h b/include/drivers/marvell/mochi/cp110_setup.h
index 3686257..f8cd26b 100644
--- a/include/drivers/marvell/mochi/cp110_setup.h
+++ b/include/drivers/marvell/mochi/cp110_setup.h
@@ -51,5 +51,6 @@
void cp110_init(uintptr_t cp110_base, uint32_t stream_id);
void cp110_ble_init(uintptr_t cp110_base);
+void cp110_amb_init(uintptr_t base);
#endif /* CP110_SETUP_H */
diff --git a/include/lib/cpus/aarch64/cortex_a57.h b/include/lib/cpus/aarch64/cortex_a57.h
index 102ff60..dc40e31 100644
--- a/include/lib/cpus/aarch64/cortex_a57.h
+++ b/include/lib/cpus/aarch64/cortex_a57.h
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2014-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020, NVIDIA Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -54,6 +55,7 @@
#define CORTEX_A57_CPUACTLR_EL1_FORCE_FPSCR_FLUSH (ULL(1) << 38)
#define CORTEX_A57_CPUACTLR_EL1_DIS_INSTR_PREFETCH (ULL(1) << 32)
#define CORTEX_A57_CPUACTLR_EL1_DIS_STREAMING (ULL(3) << 27)
+#define CORTEX_A57_CPUACTLR_EL1_EN_NC_LOAD_FWD (ULL(1) << 24)
#define CORTEX_A57_CPUACTLR_EL1_DIS_L1_STREAMING (ULL(3) << 25)
#define CORTEX_A57_CPUACTLR_EL1_DIS_INDIRECT_PREDICTOR (ULL(1) << 4)
diff --git a/include/lib/el3_runtime/aarch32/context.h b/include/lib/el3_runtime/aarch32/context.h
index c5567c9..5604c8e 100644
--- a/include/lib/el3_runtime/aarch32/context.h
+++ b/include/lib/el3_runtime/aarch32/context.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -37,7 +37,7 @@
#define WORD_SHIFT U(2)
#define DEFINE_REG_STRUCT(name, num_regs) \
typedef struct name { \
- uint32_t _regs[num_regs]; \
+ uint32_t ctx_regs[num_regs]; \
} __aligned(8) name##_t
/* Constants to determine the size of individual context structures */
@@ -47,8 +47,8 @@
#undef CTX_REG_ALL
-#define read_ctx_reg(ctx, offset) ((ctx)->_regs[offset >> WORD_SHIFT])
-#define write_ctx_reg(ctx, offset, val) (((ctx)->_regs[offset >> WORD_SHIFT]) \
+#define read_ctx_reg(ctx, offset) ((ctx)->ctx_regs[offset >> WORD_SHIFT])
+#define write_ctx_reg(ctx, offset, val) (((ctx)->ctx_regs[offset >> WORD_SHIFT]) \
= val)
typedef struct cpu_context {
regs_t regs_ctx;
diff --git a/include/lib/el3_runtime/aarch64/context.h b/include/lib/el3_runtime/aarch64/context.h
index 7a1f3a3..4158c02 100644
--- a/include/lib/el3_runtime/aarch64/context.h
+++ b/include/lib/el3_runtime/aarch64/context.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -230,7 +230,7 @@
#define DWORD_SHIFT U(3)
#define DEFINE_REG_STRUCT(name, num_regs) \
typedef struct name { \
- uint64_t _regs[num_regs]; \
+ uint64_t ctx_regs[num_regs]; \
} __aligned(16) name##_t
/* Constants to determine the size of individual context structures */
@@ -288,8 +288,8 @@
* Macros to access members of any of the above structures using their
* offsets
*/
-#define read_ctx_reg(ctx, offset) ((ctx)->_regs[(offset) >> DWORD_SHIFT])
-#define write_ctx_reg(ctx, offset, val) (((ctx)->_regs[(offset) >> DWORD_SHIFT]) \
+#define read_ctx_reg(ctx, offset) ((ctx)->ctx_regs[(offset) >> DWORD_SHIFT])
+#define write_ctx_reg(ctx, offset, val) (((ctx)->ctx_regs[(offset) >> DWORD_SHIFT]) \
= (uint64_t) (val))
/*
diff --git a/include/lib/utils_def.h b/include/lib/utils_def.h
index 23f59bd..09ae399 100644
--- a/include/lib/utils_def.h
+++ b/include/lib/utils_def.h
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020, NVIDIA Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -157,4 +158,9 @@
# define SPECULATION_SAFE_VALUE(var) var
#endif
+/*
+ * Ticks elapsed in one second with a signal of 1 MHz
+ */
+#define MHZ_TICKS_PER_SEC U(1000000)
+
#endif /* UTILS_DEF_H */
diff --git a/include/services/arm_arch_svc.h b/include/services/arm_arch_svc.h
index 23c6f56..1cb2038 100644
--- a/include/services/arm_arch_svc.h
+++ b/include/services/arm_arch_svc.h
@@ -12,6 +12,4 @@
#define SMCCC_ARCH_WORKAROUND_1 U(0x80008000)
#define SMCCC_ARCH_WORKAROUND_2 U(0x80007FFF)
-#define SMCCC_ARCH_NOT_REQUIRED -2
-
#endif /* ARM_ARCH_SVC_H */
diff --git a/lib/cpus/aarch64/cortex_a57.S b/lib/cpus/aarch64/cortex_a57.S
index dd03c0f..3fee470 100644
--- a/lib/cpus/aarch64/cortex_a57.S
+++ b/lib/cpus/aarch64/cortex_a57.S
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2014-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020, NVIDIA Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -469,6 +470,17 @@
dsb sy
#endif
+#if A57_ENABLE_NONCACHEABLE_LOAD_FWD
+ /* ---------------------------------------------
+ * Enable higher performance non-cacheable load
+ * forwarding
+ * ---------------------------------------------
+ */
+ mrs x0, CORTEX_A57_CPUACTLR_EL1
+ orr x0, x0, #CORTEX_A57_CPUACTLR_EL1_EN_NC_LOAD_FWD
+ msr CORTEX_A57_CPUACTLR_EL1, x0
+#endif
+
/* ---------------------------------------------
* Enable the SMP bit.
* ---------------------------------------------
diff --git a/lib/cpus/cpu-ops.mk b/lib/cpus/cpu-ops.mk
index e3bfc2f..3c0c9cd 100644
--- a/lib/cpus/cpu-ops.mk
+++ b/lib/cpus/cpu-ops.mk
@@ -1,5 +1,6 @@
#
# Copyright (c) 2014-2020, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2020, NVIDIA Corporation. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -16,6 +17,10 @@
# It is enabled by default.
A57_DISABLE_NON_TEMPORAL_HINT ?=1
+# Flag to enable higher performance non-cacheable load forwarding.
+# It is disabled by default.
+A57_ENABLE_NONCACHEABLE_LOAD_FWD ?= 0
+
WORKAROUND_CVE_2017_5715 ?=1
WORKAROUND_CVE_2018_3639 ?=1
DYNAMIC_WORKAROUND_CVE_2018_3639 ?=0
@@ -24,6 +29,10 @@
# By default internal
NEOVERSE_N1_EXTERNAL_LLC ?=0
+# Process A57_ENABLE_NONCACHEABLE_LOAD_FWD flag
+$(eval $(call assert_boolean,A57_ENABLE_NONCACHEABLE_LOAD_FWD))
+$(eval $(call add_define,A57_ENABLE_NONCACHEABLE_LOAD_FWD))
+
# Process SKIP_A57_L1_FLUSH_PWR_DWN flag
$(eval $(call assert_boolean,SKIP_A57_L1_FLUSH_PWR_DWN))
$(eval $(call add_define,SKIP_A57_L1_FLUSH_PWR_DWN))
diff --git a/lib/psci/psci_common.c b/lib/psci/psci_common.c
index 5ab15c6..cced276 100644
--- a/lib/psci/psci_common.c
+++ b/lib/psci/psci_common.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -601,7 +601,7 @@
unsigned int level;
/* Unlock top down. No unlocking required for level 0. */
- for (level = end_pwrlvl; level >= PSCI_CPU_PWR_LVL + 1U; level--) {
+ for (level = end_pwrlvl; level >= (PSCI_CPU_PWR_LVL + 1U); level--) {
parent_idx = parent_nodes[level - 1U];
psci_lock_release(&psci_non_cpu_pd_nodes[parent_idx]);
}
diff --git a/make_helpers/build_macros.mk b/make_helpers/build_macros.mk
index 1fa26cc..b6925d3 100644
--- a/make_helpers/build_macros.mk
+++ b/make_helpers/build_macros.mk
@@ -67,6 +67,17 @@
$(if $(__numeric),$(error $(1) must be numeric))
endef
+# CREATE_SEQ is a recursive function to create sequence of numbers from 1 to
+# $(2) and assign the sequence to $(1)
+define CREATE_SEQ
+$(if $(word $(2), $($(1))),\
+ $(eval $(1) += $(words $($(1))))\
+ $(eval $(1) := $(filter-out 0,$($(1)))),\
+ $(eval $(1) += $(words $($(1))))\
+ $(call CREATE_SEQ,$(1),$(2))\
+)
+endef
+
# IMG_LINKERFILE defines the linker script corresponding to a BL stage
# $(1) = BL stage (2, 30, 31, 32, 33)
define IMG_LINKERFILE
diff --git a/plat/arm/board/corstone700/corstone700_plat.c b/plat/arm/board/corstone700/corstone700_plat.c
index cee6fd6..e2ade70 100644
--- a/plat/arm/board/corstone700/corstone700_plat.c
+++ b/plat/arm/board/corstone700/corstone700_plat.c
@@ -1,10 +1,12 @@
/*
- * Copyright (c) 2019, Arm Limited and Contributors. All rights reserved.
+ * Copyright (c) 2019-2020, Arm Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <common/bl_common.h>
+
+#include <mhu.h>
#include <plat/arm/common/plat_arm.h>
#include <plat/common/platform.h>
#include <platform_def.h>
@@ -26,6 +28,7 @@
*/
void __init plat_arm_pwrc_setup(void)
{
+ mhu_secure_init();
}
unsigned int plat_get_syscnt_freq2(void)
diff --git a/plat/arm/board/corstone700/corstone700_stack_protector.c b/plat/arm/board/corstone700/corstone700_stack_protector.c
new file mode 100644
index 0000000..6fd09da
--- /dev/null
+++ b/plat/arm/board/corstone700/corstone700_stack_protector.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <arch_helpers.h>
+#include <plat/common/platform.h>
+
+static uint32_t plat_generate_random_number(void)
+{
+ uintptr_t return_addr = (uintptr_t)__builtin_return_address(0U);
+ uintptr_t frame_addr = (uintptr_t)__builtin_frame_address(0U);
+ uint64_t cntpct = read_cntpct_el0();
+
+ /* Generate 32-bit pattern: saving the 2 least significant bytes
+ * in random_lo and random_hi
+ */
+ uint16_t random_lo = (uint16_t)(
+ (((uint64_t)return_addr) << 13) ^ frame_addr ^ cntpct
+ );
+
+ uint16_t random_hi = (uint16_t)(
+ (((uint64_t)frame_addr) << 15) ^ return_addr ^ cntpct
+ );
+
+ return (((uint32_t)random_hi) << 16) | random_lo;
+}
+
+u_register_t plat_get_stack_protector_canary(void)
+{
+ return plat_generate_random_number(); /* a 32-bit pattern is returned */
+}
diff --git a/plat/arm/board/corstone700/corstone700_topology.c b/plat/arm/board/corstone700/corstone700_topology.c
index d9445e0..904f5ab 100644
--- a/plat/arm/board/corstone700/corstone700_topology.c
+++ b/plat/arm/board/corstone700/corstone700_topology.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2019-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -8,8 +8,8 @@
#include <plat/common/platform.h>
/* The Corstone700 power domain tree descriptor */
-static unsigned char corstone700_power_domain_tree_desc
- [PLAT_ARM_CLUSTER_COUNT + 2];
+static unsigned char corstone700_power_domain_tree_desc[PLAT_ARM_CLUSTER_COUNT
+ + 2];
/*******************************************************************************
* This function dynamically constructs the topology according to
* CLUSTER_COUNT and returns it.
diff --git a/plat/arm/board/corstone700/drivers/mhu/mhu.c b/plat/arm/board/corstone700/drivers/mhu/mhu.c
new file mode 100644
index 0000000..2231d11
--- /dev/null
+++ b/plat/arm/board/corstone700/drivers/mhu/mhu.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/bakery_lock.h>
+#include <lib/mmio.h>
+
+#include "mhu.h"
+#include <plat_arm.h>
+#include <platform_def.h>
+
+ARM_INSTANTIATE_LOCK;
+
+#pragma weak plat_arm_pwrc_setup
+
+/*
+ * Slot 31 is reserved because the MHU hardware uses this register bit to
+ * indicate a non-secure access attempt. The total number of available slots is
+ * therefore 31 [30:0].
+ */
+#define MHU_MAX_SLOT_ID 30
+
+void mhu_secure_message_start(uintptr_t address, unsigned int slot_id)
+{
+ unsigned int intr_stat_check;
+ uint64_t timeout_cnt;
+ volatile uint8_t expiration;
+
+ assert(slot_id <= MHU_MAX_SLOT_ID);
+ arm_lock_get();
+
+ /*
+ * Make sure any previous command has finished
+ * and polling timeout not expired
+ */
+
+ timeout_cnt = timeout_init_us(MHU_POLL_INTR_STAT_TIMEOUT);
+
+ do {
+ intr_stat_check = (mmio_read_32(address + CPU_INTR_S_STAT) &
+ (1 << slot_id));
+
+ expiration = timeout_elapsed(timeout_cnt);
+
+ } while ((intr_stat_check != 0U) && (expiration == 0U));
+
+ /*
+ * Note: No risk of timer overflows while waiting
+ * for the timeout expiration.
+ * According to Armv8 TRM: System counter roll-over
+ * time of not less than 40 years
+ */
+}
+
+void mhu_secure_message_send(uintptr_t address,
+ unsigned int slot_id,
+ unsigned int message)
+{
+ unsigned char access_ready;
+ uint64_t timeout_cnt;
+ volatile uint8_t expiration;
+
+ assert(slot_id <= MHU_MAX_SLOT_ID);
+ assert((mmio_read_32(address + CPU_INTR_S_STAT) &
+ (1 << slot_id)) == 0U);
+
+ MHU_V2_ACCESS_REQUEST(address);
+
+ timeout_cnt = timeout_init_us(MHU_POLL_INTR_STAT_TIMEOUT);
+
+ do {
+ access_ready = MHU_V2_IS_ACCESS_READY(address);
+ expiration = timeout_elapsed(timeout_cnt);
+
+ } while ((access_ready == 0U) && (expiration == 0U));
+
+ /*
+ * Note: No risk of timer overflows while waiting
+ * for the timeout expiration.
+ * According to Armv8 TRM: System counter roll-over
+ * time of not less than 40 years
+ */
+
+ mmio_write_32(address + CPU_INTR_S_SET, message);
+}
+
+void mhu_secure_message_end(uintptr_t address, unsigned int slot_id)
+{
+ assert(slot_id <= MHU_MAX_SLOT_ID);
+ /*
+ * Clear any response we got by writing one in the relevant slot bit to
+ * the CLEAR register
+ */
+ MHU_V2_CLEAR_REQUEST(address);
+
+ arm_lock_release();
+}
+
+void __init mhu_secure_init(void)
+{
+ arm_lock_init();
+
+ /*
+ * The STAT register resets to zero. Ensure it is in the expected state,
+ * as a stale or garbage value would make us think it's a message we've
+ * already sent.
+ */
+
+ assert(mmio_read_32(PLAT_SDK700_MHU0_SEND + CPU_INTR_S_STAT) == 0);
+}
diff --git a/plat/arm/board/corstone700/drivers/mhu/mhu.h b/plat/arm/board/corstone700/drivers/mhu/mhu.h
new file mode 100644
index 0000000..3808746
--- /dev/null
+++ b/plat/arm/board/corstone700/drivers/mhu/mhu.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef MHU_H
+#define MHU_H
+
+#define MHU_POLL_INTR_STAT_TIMEOUT 50000 /*timeout value in us*/
+
+/* CPU MHU secure channel registers */
+#define CPU_INTR_S_STAT 0x00
+#define CPU_INTR_S_SET 0x0C
+
+/* MHUv2 Control Registers Offsets */
+#define MHU_V2_MSG_CFG_OFFSET 0xF80
+#define MHU_V2_ACCESS_REQ_OFFSET 0xF88
+#define MHU_V2_ACCESS_READY_OFFSET 0xF8C
+
+#define MHU_V2_ACCESS_REQUEST(addr) \
+ mmio_write_32((addr) + MHU_V2_ACCESS_REQ_OFFSET, 0x1)
+
+#define MHU_V2_CLEAR_REQUEST(addr) \
+ mmio_write_32((addr) + MHU_V2_ACCESS_REQ_OFFSET, 0x0)
+
+#define MHU_V2_IS_ACCESS_READY(addr) \
+ (mmio_read_32((addr) + MHU_V2_ACCESS_READY_OFFSET) & 0x1)
+
+void mhu_secure_message_start(uintptr_t address, unsigned int slot_id);
+void mhu_secure_message_send(uintptr_t address,
+ unsigned int slot_id,
+ unsigned int message);
+void mhu_secure_message_end(uintptr_t address, unsigned int slot_id);
+void mhu_secure_init(void);
+
+#endif /* MHU_H */
diff --git a/plat/arm/board/corstone700/include/platform_def.h b/plat/arm/board/corstone700/include/platform_def.h
index 8dff3ec..0fb74e4 100644
--- a/plat/arm/board/corstone700/include/platform_def.h
+++ b/plat/arm/board/corstone700/include/platform_def.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2019, Arm Limited and Contributors. All rights reserved.
+ * Copyright (c) 2019-2020, Arm Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -9,20 +9,35 @@
#include <lib/utils_def.h>
#include <lib/xlat_tables/xlat_tables_defs.h>
+
#include <plat/arm/board/common/v2m_def.h>
#include <plat/arm/common/arm_spm_def.h>
#include <plat/common/common_def.h>
+/* PL011 UART related constants */
+#ifdef V2M_IOFPGA_UART0_CLK_IN_HZ
+#undef V2M_IOFPGA_UART0_CLK_IN_HZ
+#endif
+
+#ifdef V2M_IOFPGA_UART1_CLK_IN_HZ
+#undef V2M_IOFPGA_UART1_CLK_IN_HZ
+#endif
+
+#define V2M_IOFPGA_UART0_CLK_IN_HZ 32000000
+#define V2M_IOFPGA_UART1_CLK_IN_HZ 32000000
+
/* Core/Cluster/Thread counts for Corstone700 */
#define CORSTONE700_CLUSTER_COUNT U(1)
#define CORSTONE700_MAX_CPUS_PER_CLUSTER U(4)
#define CORSTONE700_MAX_PE_PER_CPU U(1)
-#define CORSTONE700_CORE_COUNT (CORSTONE700_CLUSTER_COUNT * \
- CORSTONE700_MAX_CPUS_PER_CLUSTER * \
- CORSTONE700_MAX_PE_PER_CPU)
-#define PLATFORM_CORE_COUNT CORSTONE700_CORE_COUNT
+
#define PLAT_ARM_CLUSTER_COUNT CORSTONE700_CLUSTER_COUNT
+#define PLATFORM_CORE_COUNT (PLAT_ARM_CLUSTER_COUNT * \
+ CORSTONE700_MAX_CPUS_PER_CLUSTER * \
+ CORSTONE700_MAX_PE_PER_CPU)
+
+
/* UART related constants */
#define PLAT_ARM_BOOT_UART_BASE 0x1a510000
#define PLAT_ARM_BOOT_UART_CLK_IN_HZ V2M_IOFPGA_UART0_CLK_IN_HZ
@@ -85,8 +100,12 @@
ARM_BL_REGIONS)
/* GIC related constants */
-#define PLAT_ARM_GICD_BASE 0x1C010000
-#define PLAT_ARM_GICC_BASE 0x1C02F000
+#define PLAT_ARM_GICD_BASE 0x1C010000
+#define PLAT_ARM_GICC_BASE 0x1C02F000
+
+/* MHUv2 Secure Channel receiver and sender */
+#define PLAT_SDK700_MHU0_SEND 0x1B800000
+#define PLAT_SDK700_MHU0_RECV 0x1B810000
/* Timer/watchdog related constants */
#define ARM_SYS_CNTCTL_BASE UL(0x1a200000)
@@ -101,46 +120,46 @@
* Macros mapping the MPIDR Affinity levels to ARM Platform Power levels. The
* power levels have a 1:1 mapping with the MPIDR affinity levels.
*/
-#define ARM_PWR_LVL0 MPIDR_AFFLVL0
-#define ARM_PWR_LVL1 MPIDR_AFFLVL1
-#define ARM_PWR_LVL2 MPIDR_AFFLVL2
+#define ARM_PWR_LVL0 MPIDR_AFFLVL0
+#define ARM_PWR_LVL1 MPIDR_AFFLVL1
+#define ARM_PWR_LVL2 MPIDR_AFFLVL2
/*
* Macros for local power states in ARM platforms encoded by State-ID field
* within the power-state parameter.
*/
/* Local power state for power domains in Run state. */
-#define ARM_LOCAL_STATE_RUN U(0)
+#define ARM_LOCAL_STATE_RUN U(0)
/* Local power state for retention. Valid only for CPU power domains */
-#define ARM_LOCAL_STATE_RET U(1)
+#define ARM_LOCAL_STATE_RET U(1)
/* Local power state for OFF/power-down. Valid for CPU and cluster
* power domains
*/
-#define ARM_LOCAL_STATE_OFF U(2)
+#define ARM_LOCAL_STATE_OFF U(2)
-#define PLAT_ARM_TRUSTED_MAILBOX_BASE ARM_TRUSTED_SRAM_BASE
-#define PLAT_ARM_NSTIMER_FRAME_ID U(1)
+#define PLAT_ARM_TRUSTED_MAILBOX_BASE ARM_TRUSTED_SRAM_BASE
+#define PLAT_ARM_NSTIMER_FRAME_ID U(1)
-#define PLAT_ARM_NS_IMAGE_OFFSET (ARM_DRAM1_BASE + UL(0x8000000))
+#define PLAT_ARM_NS_IMAGE_OFFSET (ARM_DRAM1_BASE + UL(0x8000000))
-#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
-#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
+#define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
/*
* This macro defines the deepest retention state possible. A higher state
* ID will represent an invalid or a power down state.
*/
-#define PLAT_MAX_RET_STATE 1
+#define PLAT_MAX_RET_STATE 1
/*
* This macro defines the deepest power down states possible. Any state ID
* higher than this is invalid.
*/
-#define PLAT_MAX_OFF_STATE 2
+#define PLAT_MAX_OFF_STATE 2
-#define PLATFORM_STACK_SIZE UL(0x440)
+#define PLATFORM_STACK_SIZE UL(0x440)
-#define ARM_MAP_SHARED_RAM MAP_REGION_FLAT( \
+#define ARM_MAP_SHARED_RAM MAP_REGION_FLAT( \
ARM_SHARED_RAM_BASE, \
ARM_SHARED_RAM_SIZE, \
MT_DEVICE | MT_RW | MT_SECURE)
@@ -170,21 +189,21 @@
#define CORSTONE700_DEVICE_BASE (0x1A000000)
#define CORSTONE700_DEVICE_SIZE (0x26000000)
-#define CORSTONE700_MAP_DEVICE MAP_REGION_FLAT( \
- CORSTONE700_DEVICE_BASE, \
- CORSTONE700_DEVICE_SIZE, \
- MT_DEVICE | MT_RW | MT_SECURE)
+#define CORSTONE700_MAP_DEVICE MAP_REGION_FLAT( \
+ CORSTONE700_DEVICE_BASE,\
+ CORSTONE700_DEVICE_SIZE,\
+ MT_DEVICE | MT_RW | MT_SECURE)
-#define ARM_IRQ_SEC_PHY_TIMER 29
+#define ARM_IRQ_SEC_PHY_TIMER 29
-#define ARM_IRQ_SEC_SGI_0 8
-#define ARM_IRQ_SEC_SGI_1 9
-#define ARM_IRQ_SEC_SGI_2 10
-#define ARM_IRQ_SEC_SGI_3 11
-#define ARM_IRQ_SEC_SGI_4 12
-#define ARM_IRQ_SEC_SGI_5 13
-#define ARM_IRQ_SEC_SGI_6 14
-#define ARM_IRQ_SEC_SGI_7 15
+#define ARM_IRQ_SEC_SGI_0 8
+#define ARM_IRQ_SEC_SGI_1 9
+#define ARM_IRQ_SEC_SGI_2 10
+#define ARM_IRQ_SEC_SGI_3 11
+#define ARM_IRQ_SEC_SGI_4 12
+#define ARM_IRQ_SEC_SGI_5 13
+#define ARM_IRQ_SEC_SGI_6 14
+#define ARM_IRQ_SEC_SGI_7 15
/*
* Define a list of Group 1 Secure and Group 0 interrupt properties as per GICv3
@@ -192,7 +211,7 @@
* as Group 0 interrupts.
*/
#define ARM_G1S_IRQ_PROPS(grp) \
- INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, \
+ INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, \
(grp), GIC_INTR_CFG_LEVEL), \
INTR_PROP_DESC(ARM_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, \
(grp), GIC_INTR_CFG_EDGE), \
@@ -217,11 +236,11 @@
* as Group 0 interrupts.
*/
#define PLAT_ARM_G1S_IRQ_PROPS(grp) \
- ARM_G1S_IRQ_PROPS(grp), \
- INTR_PROP_DESC(CORSTONE700_IRQ_TZ_WDOG, \
- GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_LEVEL), \
- INTR_PROP_DESC(CORSTONE700_IRQ_SEC_SYS_TIMER, \
- GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_LEVEL) \
+ ARM_G1S_IRQ_PROPS(grp), \
+ INTR_PROP_DESC(CORSTONE700_IRQ_TZ_WDOG, GIC_HIGHEST_SEC_PRIORITY, \
+ (grp), GIC_INTR_CFG_LEVEL), \
+ INTR_PROP_DESC(CORSTONE700_IRQ_SEC_SYS_TIMER, \
+ GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_LEVEL)
#define PLAT_ARM_G0_IRQ_PROPS(grp) ARM_G0_IRQ_PROPS(grp)
diff --git a/plat/arm/board/corstone700/platform.mk b/plat/arm/board/corstone700/platform.mk
index bff3589..a4d4f22 100644
--- a/plat/arm/board/corstone700/platform.mk
+++ b/plat/arm/board/corstone700/platform.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2019, Arm Limited and Contributors. All rights reserved.
+# Copyright (c) 2019-2020, Arm Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -11,16 +11,19 @@
plat/arm/common/arm_common.c \
lib/xlat_tables/aarch32/xlat_tables.c \
lib/xlat_tables/xlat_tables_common.c \
- ${CORSTONE700_CPU_LIBS}
+ ${CORSTONE700_CPU_LIBS} \
+ plat/arm/board/corstone700/drivers/mhu/mhu.c
-PLAT_INCLUDES := -Iplat/arm/board/corstone700/include
+PLAT_INCLUDES := -Iplat/arm/board/corstone700/include \
+ -Iinclude/plat/arm/common \
+ -Iplat/arm/board/corstone700/drivers/mhu
NEED_BL32 := yes
-CORSTONE700_GIC_SOURCES := drivers/arm/gic/common/gic_common.c \
- drivers/arm/gic/v2/gicv2_main.c \
- drivers/arm/gic/v2/gicv2_helpers.c \
- plat/common/plat_gicv2.c \
+CORSTONE700_GIC_SOURCES := drivers/arm/gic/common/gic_common.c \
+ drivers/arm/gic/v2/gicv2_main.c \
+ drivers/arm/gic/v2/gicv2_helpers.c \
+ plat/common/plat_gicv2.c \
plat/arm/common/arm_gicv2.c
# BL1/BL2 Image not a part of the capsule Image for Corstone700
diff --git a/plat/arm/board/corstone700/sp_min/sp_min-corstone700.mk b/plat/arm/board/corstone700/sp_min/sp_min-corstone700.mk
index 57e1ec3..acee6c3 100644
--- a/plat/arm/board/corstone700/sp_min/sp_min-corstone700.mk
+++ b/plat/arm/board/corstone700/sp_min/sp_min-corstone700.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2019, Arm Limited and Contributors. All rights reserved.
+# Copyright (c) 2019-2020, Arm Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -15,4 +15,10 @@
plat/arm/board/corstone700/sp_min/corstone700_sp_min_setup.c \
${CORSTONE700_GIC_SOURCES}
+ifneq (${ENABLE_STACK_PROTECTOR},0)
+ ifneq (${ENABLE_STACK_PROTECTOR},none)
+ BL32_SOURCES += plat/arm/board/corstone700/corstone700_stack_protector.c
+ endif
+endif
+
include plat/arm/common/sp_min/arm_sp_min.mk
diff --git a/plat/arm/board/fvp/include/platform_def.h b/plat/arm/board/fvp/include/platform_def.h
index 602ea6d..bfe207a 100644
--- a/plat/arm/board/fvp/include/platform_def.h
+++ b/plat/arm/board/fvp/include/platform_def.h
@@ -116,12 +116,18 @@
# define PLAT_ARM_MAX_BL2_SIZE (UL(0x11000) - FVP_BL2_ROMLIB_OPTIMIZATION)
#endif
+#if RESET_TO_BL31
+/* Size of Trusted SRAM - the first 4KB of shared memory */
+#define PLAT_ARM_MAX_BL31_SIZE (PLAT_ARM_TRUSTED_SRAM_SIZE - \
+ ARM_SHARED_RAM_SIZE)
+#else
/*
* Since BL31 NOBITS overlays BL2 and BL1-RW, PLAT_ARM_MAX_BL31_SIZE is
* calculated using the current BL31 PROGBITS debug size plus the sizes of
* BL2 and BL1-RW
*/
#define PLAT_ARM_MAX_BL31_SIZE UL(0x3B000)
+#endif /* RESET_TO_BL31 */
#ifndef __aarch64__
/*
diff --git a/plat/arm/board/rddaniel/fdts/rddaniel_fw_config.dts b/plat/arm/board/rddaniel/fdts/rddaniel_fw_config.dts
new file mode 100644
index 0000000..81e4cc1
--- /dev/null
+++ b/plat/arm/board/rddaniel/fdts/rddaniel_fw_config.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <export/common/tbbr/tbbr_img_def_exp.h>
+
+/dts-v1/;
+
+/ {
+ dtb-registry {
+ compatible = "arm,dyn_cfg-dtb_registry";
+
+ /* tb_fw_config is temporarily contained on this dtb */
+ tb_fw-config {
+ load-address = <0x0 0x4001010>;
+ max-size = <0x200>;
+ id = <TB_FW_CONFIG_ID>;
+ };
+
+ nt_fw-config {
+ load-address = <0x0 0xFEF00000>;
+ max-size = <0x0100000>;
+ id = <NT_FW_CONFIG_ID>;
+ };
+ };
+
+ tb_fw-config {
+ compatible = "arm,tb_fw";
+
+ /* Disable authentication for development */
+ disable_auth = <0x0>;
+
+ /*
+ * The following two entries are placeholders for Mbed TLS
+ * heap information. The default values don't matter since
+ * they will be overwritten by BL1.
+ * In case of having shared Mbed TLS heap between BL1 and BL2,
+ * BL1 will populate these two properties with the respective
+ * info about the shared heap. This info will be available for
+ * BL2 in order to locate and re-use the heap.
+ */
+ mbedtls_heap_addr = <0x0 0x0>;
+ mbedtls_heap_size = <0x0>;
+ };
+};
diff --git a/plat/arm/board/rddaniel/fdts/rddaniel_tb_fw_config.dts b/plat/arm/board/rddaniel/fdts/rddaniel_tb_fw_config.dts
deleted file mode 100644
index 9acec13..0000000
--- a/plat/arm/board/rddaniel/fdts/rddaniel_tb_fw_config.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-/dts-v1/;
-
-/ {
- /* Platform Config */
- compatible = "arm,tb_fw";
- nt_fw_config_addr = <0x0 0xFEF00000>;
- nt_fw_config_max_size = <0x0100000>;
-
- /*
- * The following two entries are placeholders for Mbed TLS
- * heap information. The default values don't matter since
- * they will be overwritten by BL1.
- * In case of having shared Mbed TLS heap between BL1 and BL2,
- * BL1 will populate these two properties with the respective
- * info about the shared heap. This info will be available for
- * BL2 in order to locate and re-use the heap.
- */
- mbedtls_heap_addr = <0x0 0x0>;
- mbedtls_heap_size = <0x0>;
-};
diff --git a/plat/arm/board/rddaniel/platform.mk b/plat/arm/board/rddaniel/platform.mk
index 67f5777..c7e3c7d 100644
--- a/plat/arm/board/rddaniel/platform.mk
+++ b/plat/arm/board/rddaniel/platform.mk
@@ -28,8 +28,8 @@
plat/arm/common/arm_nor_psci_mem_protect.c
# Add the FDT_SOURCES and options for Dynamic Config
-FDT_SOURCES += ${RDDANIEL_BASE}/fdts/${PLAT}_tb_fw_config.dts
-TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
+FDT_SOURCES += ${RDDANIEL_BASE}/fdts/${PLAT}_fw_config.dts
+TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
# Add the TB_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))
diff --git a/plat/arm/board/rde1edge/fdts/rde1edge_fw_config.dts b/plat/arm/board/rde1edge/fdts/rde1edge_fw_config.dts
new file mode 100644
index 0000000..2719ab4
--- /dev/null
+++ b/plat/arm/board/rde1edge/fdts/rde1edge_fw_config.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2019-2020, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <export/common/tbbr/tbbr_img_def_exp.h>
+
+/dts-v1/;
+
+/ {
+ dtb-registry {
+ compatible = "arm,dyn_cfg-dtb_registry";
+
+ /* tb_fw_config is temporarily contained on this dtb */
+ tb_fw-config {
+ load-address = <0x0 0x4001010>;
+ max-size = <0x200>;
+ id = <TB_FW_CONFIG_ID>;
+ };
+
+ nt_fw-config {
+ load-address = <0x0 0xFEF00000>;
+ max-size = <0x0100000>;
+ id = <NT_FW_CONFIG_ID>;
+ };
+ };
+
+ tb_fw-config {
+ compatible = "arm,tb_fw";
+
+ /* Disable authentication for development */
+ disable_auth = <0x0>;
+
+ /*
+ * The following two entries are placeholders for Mbed TLS
+ * heap information. The default values don't matter since
+ * they will be overwritten by BL1.
+ * In case of having shared Mbed TLS heap between BL1 and BL2,
+ * BL1 will populate these two properties with the respective
+ * info about the shared heap. This info will be available for
+ * BL2 in order to locate and re-use the heap.
+ */
+ mbedtls_heap_addr = <0x0 0x0>;
+ mbedtls_heap_size = <0x0>;
+ };
+};
diff --git a/plat/arm/board/rde1edge/fdts/rde1edge_tb_fw_config.dts b/plat/arm/board/rde1edge/fdts/rde1edge_tb_fw_config.dts
deleted file mode 100644
index 766dc00..0000000
--- a/plat/arm/board/rde1edge/fdts/rde1edge_tb_fw_config.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2018, Arm Limited. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-/dts-v1/;
-
-/ {
- /* Platform Config */
- compatible = "arm,tb_fw";
- nt_fw_config_addr = <0x0 0xFEF00000>;
- nt_fw_config_max_size = <0x0100000>;
- /*
- * The following two entries are placeholders for Mbed TLS
- * heap information. The default values don't matter since
- * they will be overwritten by BL1.
- * In case of having shared Mbed TLS heap between BL1 and BL2,
- * BL1 will populate these two properties with the respective
- * info about the shared heap. This info will be available for
- * BL2 in order to locate and re-use the heap.
- */
- mbedtls_heap_addr = <0x0 0x0>;
- mbedtls_heap_size = <0x0>;
-};
diff --git a/plat/arm/board/rde1edge/platform.mk b/plat/arm/board/rde1edge/platform.mk
index 88aa634..1a4dd17 100644
--- a/plat/arm/board/rde1edge/platform.mk
+++ b/plat/arm/board/rde1edge/platform.mk
@@ -35,8 +35,8 @@
endif
# Add the FDT_SOURCES and options for Dynamic Config
-FDT_SOURCES += ${RDE1EDGE_BASE}/fdts/${PLAT}_tb_fw_config.dts
-TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
+FDT_SOURCES += ${RDE1EDGE_BASE}/fdts/${PLAT}_fw_config.dts
+TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
# Add the TB_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))
diff --git a/plat/arm/board/rdn1edge/fdts/rdn1edge_fw_config.dts b/plat/arm/board/rdn1edge/fdts/rdn1edge_fw_config.dts
new file mode 100644
index 0000000..ba74b75
--- /dev/null
+++ b/plat/arm/board/rdn1edge/fdts/rdn1edge_fw_config.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <export/common/tbbr/tbbr_img_def_exp.h>
+
+/dts-v1/;
+/ {
+ dtb-registry {
+ compatible = "arm,dyn_cfg-dtb_registry";
+
+ /* tb_fw_config is temporarily contained on this dtb */
+ tb_fw-config {
+ load-address = <0x0 0x80001010>;
+ max-size = <0x200>;
+ id = <TB_FW_CONFIG_ID>;
+ };
+
+ nt_fw-config {
+ load-address = <0x0 0xFEF00000>;
+ max-size = <0x0100000>;
+ id = <NT_FW_CONFIG_ID>;
+ };
+ };
+
+ tb_fw-config {
+ compatible = "arm,tb_fw";
+
+ /* Disable authentication for development */
+ disable_auth = <0x0>;
+
+ /*
+ * The following two entries are placeholders for Mbed TLS
+ * heap information. The default values don't matter since
+ * they will be overwritten by BL1.
+ * In case of having shared Mbed TLS heap between BL1 and BL2,
+ * BL1 will populate these two properties with the respective
+ * info about the shared heap. This info will be available for
+ * BL2 in order to locate and re-use the heap.
+ */
+ mbedtls_heap_addr = <0x0 0x0>;
+ mbedtls_heap_size = <0x0>;
+ };
+};
+
diff --git a/plat/arm/board/rdn1edge/fdts/rdn1edge_tb_fw_config.dts b/plat/arm/board/rdn1edge/fdts/rdn1edge_tb_fw_config.dts
deleted file mode 100644
index b14d7ad..0000000
--- a/plat/arm/board/rdn1edge/fdts/rdn1edge_tb_fw_config.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-/dts-v1/;
-
-/ {
- /* Platform Config */
- compatible = "arm,tb_fw";
- nt_fw_config_addr = <0x0 0xFEF00000>;
- nt_fw_config_max_size = <0x0100000>;
- /*
- * The following two entries are placeholders for Mbed TLS
- * heap information. The default values don't matter since
- * they will be overwritten by BL1.
- * In case of having shared Mbed TLS heap between BL1 and BL2,
- * BL1 will populate these two properties with the respective
- * info about the shared heap. This info will be available for
- * BL2 in order to locate and re-use the heap.
- */
- mbedtls_heap_addr = <0x0 0x0>;
- mbedtls_heap_size = <0x0>;
-};
diff --git a/plat/arm/board/rdn1edge/platform.mk b/plat/arm/board/rdn1edge/platform.mk
index 04f70f3..135676d 100644
--- a/plat/arm/board/rdn1edge/platform.mk
+++ b/plat/arm/board/rdn1edge/platform.mk
@@ -39,8 +39,8 @@
BL31_CFLAGS += -DPLAT_XLAT_TABLES_DYNAMIC=1
# Add the FDT_SOURCES and options for Dynamic Config
-FDT_SOURCES += ${RDN1EDGE_BASE}/fdts/${PLAT}_tb_fw_config.dts
-TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
+FDT_SOURCES += ${RDN1EDGE_BASE}/fdts/${PLAT}_fw_config.dts
+TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
# Add the TB_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))
@@ -51,8 +51,9 @@
# Add the NT_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${NT_FW_CONFIG},--nt-fw-config))
-ifneq ($(CSS_SGI_CHIP_COUNT),$(filter $(CSS_SGI_CHIP_COUNT),1 2))
- $(error "Chip count for RDN1Edge platform should either 1 or 2, currently \
+$(eval $(call CREATE_SEQ,SEQ,2))
+ifneq ($(CSS_SGI_CHIP_COUNT),$(filter $(CSS_SGI_CHIP_COUNT),$(SEQ)))
+ $(error "Chip count for RDN1Edge platform should be one of $(SEQ), currently \
set to ${CSS_SGI_CHIP_COUNT}.")
endif
diff --git a/plat/arm/board/sgi575/fdts/sgi575_fw_config.dts b/plat/arm/board/sgi575/fdts/sgi575_fw_config.dts
new file mode 100644
index 0000000..605cc08
--- /dev/null
+++ b/plat/arm/board/sgi575/fdts/sgi575_fw_config.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <export/common/tbbr/tbbr_img_def_exp.h>
+
+/dts-v1/;
+
+/ {
+ dtb-registry {
+ compatible = "arm,dyn_cfg-dtb_registry";
+
+ /* tb_fw_config is temporarily contained on this dtb */
+ tb_fw-config {
+ load-address = <0x0 0x4001010>;
+ max-size = <0x200>;
+ id = <TB_FW_CONFIG_ID>;
+ };
+
+ nt_fw-config {
+ load-address = <0x0 0xFEF00000>;
+ max-size = <0x0100000>;
+ id = <NT_FW_CONFIG_ID>;
+ };
+ };
+
+ tb_fw-config {
+ compatible = "arm,tb_fw";
+
+ /* Disable authentication for development */
+ disable_auth = <0x0>;
+
+ /*
+ * The following two entries are placeholders for Mbed TLS
+ * heap information. The default values don't matter since
+ * they will be overwritten by BL1.
+ * In case of having shared Mbed TLS heap between BL1 and BL2,
+ * BL1 will populate these two properties with the respective
+ * info about the shared heap. This info will be available for
+ * BL2 in order to locate and re-use the heap.
+ */
+ mbedtls_heap_addr = <0x0 0x0>;
+ mbedtls_heap_size = <0x0>;
+ };
+};
diff --git a/plat/arm/board/sgi575/fdts/sgi575_tb_fw_config.dts b/plat/arm/board/sgi575/fdts/sgi575_tb_fw_config.dts
deleted file mode 100644
index b14d7ad..0000000
--- a/plat/arm/board/sgi575/fdts/sgi575_tb_fw_config.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-/dts-v1/;
-
-/ {
- /* Platform Config */
- compatible = "arm,tb_fw";
- nt_fw_config_addr = <0x0 0xFEF00000>;
- nt_fw_config_max_size = <0x0100000>;
- /*
- * The following two entries are placeholders for Mbed TLS
- * heap information. The default values don't matter since
- * they will be overwritten by BL1.
- * In case of having shared Mbed TLS heap between BL1 and BL2,
- * BL1 will populate these two properties with the respective
- * info about the shared heap. This info will be available for
- * BL2 in order to locate and re-use the heap.
- */
- mbedtls_heap_addr = <0x0 0x0>;
- mbedtls_heap_size = <0x0>;
-};
diff --git a/plat/arm/board/sgi575/platform.mk b/plat/arm/board/sgi575/platform.mk
index 76cc4e2..d91f829 100644
--- a/plat/arm/board/sgi575/platform.mk
+++ b/plat/arm/board/sgi575/platform.mk
@@ -35,8 +35,8 @@
endif
# Add the FDT_SOURCES and options for Dynamic Config
-FDT_SOURCES += ${SGI575_BASE}/fdts/${PLAT}_tb_fw_config.dts
-TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
+FDT_SOURCES += ${SGI575_BASE}/fdts/${PLAT}_fw_config.dts
+TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
# Add the TB_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))
diff --git a/plat/arm/board/sgm775/fdts/sgm775_fw_config.dts b/plat/arm/board/sgm775/fdts/sgm775_fw_config.dts
new file mode 100644
index 0000000..a0d0ea9
--- /dev/null
+++ b/plat/arm/board/sgm775/fdts/sgm775_fw_config.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <export/common/tbbr/tbbr_img_def_exp.h>
+
+/dts-v1/;
+
+/ {
+ dtb-registry {
+ compatible = "arm,dyn_cfg-dtb_registry";
+
+ /* tb_fw_config is temporarily contained on this dtb */
+ tb_fw-config {
+ load-address = <0x0 0x4001010>;
+ max-size = <0x200>;
+ id = <TB_FW_CONFIG_ID>;
+ };
+
+ hw-config {
+ load-address = <0x0 0x83000000>;
+ max-size = <0x01000000>;
+ id = <HW_CONFIG_ID>;
+ };
+ };
+
+ tb_fw-config {
+ compatible = "arm,tb_fw";
+
+ /* Disable authentication for development */
+ disable_auth = <0x0>;
+ };
+};
diff --git a/plat/arm/board/sgm775/fdts/sgm775_tb_fw_config.dts b/plat/arm/board/sgm775/fdts/sgm775_tb_fw_config.dts
deleted file mode 100644
index 9502549..0000000
--- a/plat/arm/board/sgm775/fdts/sgm775_tb_fw_config.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-/dts-v1/;
-
-/ {
- /* Platform Config */
- plat_arm_bl2 {
- compatible = "arm,tb_fw";
- hw_config_addr = <0x0 0x83000000>;
- hw_config_max_size = <0x01000000>;
- };
-};
diff --git a/plat/arm/board/sgm775/platform.mk b/plat/arm/board/sgm775/platform.mk
index f096ca5..355b9ee 100644
--- a/plat/arm/board/sgm775/platform.mk
+++ b/plat/arm/board/sgm775/platform.mk
@@ -8,7 +8,7 @@
SGM775_BASE= plat/arm/board/sgm775
-FDT_SOURCES += ${SGM775_BASE}/fdts/sgm775_tb_fw_config.dts
+FDT_SOURCES += ${SGM775_BASE}/fdts/sgm775_fw_config.dts
PLAT_INCLUDES +=-I${SGM775_BASE}/include/
diff --git a/plat/common/plat_psci_common.c b/plat/common/plat_psci_common.c
index 80ed819..bed8890 100644
--- a/plat/common/plat_psci_common.c
+++ b/plat/common/plat_psci_common.c
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020, NVIDIA Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -9,6 +10,7 @@
#include <arch.h>
#include <lib/pmf/pmf.h>
#include <lib/psci/psci.h>
+#include <lib/utils_def.h>
#include <plat/common/platform.h>
#if ENABLE_PSCI_STAT && ENABLE_PMF
@@ -16,9 +18,6 @@
#pragma weak plat_psci_stat_accounting_stop
#pragma weak plat_psci_stat_get_residency
-/* Ticks elapsed in one second by a signal of 1 MHz */
-#define MHZ_TICKS_PER_SEC 1000000U
-
/* Maximum time-stamp value read from architectural counters */
#ifdef __aarch64__
#define MAX_TS UINT64_MAX
diff --git a/plat/intel/soc/agilex/bl2_plat_setup.c b/plat/intel/soc/agilex/bl2_plat_setup.c
index 9587d48..f328207 100644
--- a/plat/intel/soc/agilex/bl2_plat_setup.c
+++ b/plat/intel/soc/agilex/bl2_plat_setup.c
@@ -46,7 +46,7 @@
{0},
};
-boot_source_type boot_source;
+boot_source_type boot_source = BOOT_SOURCE;
void bl2_el3_early_platform_setup(u_register_t x0, u_register_t x1,
u_register_t x2, u_register_t x4)
@@ -59,7 +59,6 @@
if (socfpga_get_handoff(&reverse_handoff_ptr))
return;
config_pinmux(&reverse_handoff_ptr);
- boot_source = reverse_handoff_ptr.boot_source;
config_clkmgr_handoff(&reverse_handoff_ptr);
enable_nonsecure_access();
diff --git a/plat/intel/soc/agilex/include/socfpga_plat_def.h b/plat/intel/soc/agilex/include/socfpga_plat_def.h
index b4e0921..6c9d81c 100644
--- a/plat/intel/soc/agilex/include/socfpga_plat_def.h
+++ b/plat/intel/soc/agilex/include/socfpga_plat_def.h
@@ -12,6 +12,7 @@
/* Platform Setting */
#define PLATFORM_MODEL PLAT_SOCFPGA_AGILEX
+#define BOOT_SOURCE BOOT_SOURCE_SDMMC
/* Register Mapping */
#define SOCFPGA_MMC_REG_BASE 0xff808000
diff --git a/plat/intel/soc/common/include/socfpga_handoff.h b/plat/intel/soc/common/include/socfpga_handoff.h
index 889d137..ba0f7f3 100644
--- a/plat/intel/soc/common/include/socfpga_handoff.h
+++ b/plat/intel/soc/common/include/socfpga_handoff.h
@@ -125,7 +125,6 @@
uint32_t misc_magic;
uint32_t misc_length;
uint32_t _pad_0x618_0x620[2];
- uint32_t boot_source;
} handoff;
int verify_handoff_image(handoff *hoff_ptr, handoff *reverse_hoff_ptr);
diff --git a/plat/intel/soc/common/include/socfpga_mailbox.h b/plat/intel/soc/common/include/socfpga_mailbox.h
index 38f4696..7d725b0 100644
--- a/plat/intel/soc/common/include/socfpga_mailbox.h
+++ b/plat/intel/soc/common/include/socfpga_mailbox.h
@@ -126,21 +126,21 @@
void mailbox_set_qspi_close(void);
void mailbox_set_qspi_open(void);
void mailbox_set_qspi_direct(void);
-int mailbox_send_cmd(int job_id, unsigned int cmd, uint32_t *args,
+int mailbox_send_cmd(int job_id, unsigned int cmd, uint64_t *args,
int len, int urgent, uint32_t *response, int resp_len);
-int mailbox_send_cmd_async(int job_id, unsigned int cmd, uint32_t *args,
+int mailbox_send_cmd_async(int job_id, unsigned int cmd, uint64_t *args,
int len, int urgent);
int mailbox_read_response(int job_id, uint32_t *response, int resp_len);
int mailbox_get_qspi_clock(void);
void mailbox_reset_cold(void);
void mailbox_clear_response(void);
-uint32_t intel_mailbox_get_config_status(uint32_t cmd);
+int intel_mailbox_get_config_status(uint32_t cmd);
int intel_mailbox_is_fpga_not_ready(void);
int mailbox_rsu_get_spt_offset(uint32_t *resp_buf, uint32_t resp_buf_len);
int mailbox_rsu_status(uint32_t *resp_buf, uint32_t resp_buf_len);
-int mailbox_rsu_update(uint32_t *flash_offset);
-int mailbox_hps_stage_notify(uint32_t execution_stage);
+int mailbox_rsu_update(uint64_t *flash_offset);
+int mailbox_hps_stage_notify(uint64_t execution_stage);
#endif /* SOCFPGA_MBOX_H */
diff --git a/plat/intel/soc/common/soc/socfpga_mailbox.c b/plat/intel/soc/common/soc/socfpga_mailbox.c
index 673c2d5..8ce40a7 100644
--- a/plat/intel/soc/common/soc/socfpga_mailbox.c
+++ b/plat/intel/soc/common/soc/socfpga_mailbox.c
@@ -11,7 +11,7 @@
#include "socfpga_mailbox.h"
#include "socfpga_sip_svc.h"
-static int fill_mailbox_circular_buffer(uint32_t header_cmd, uint32_t *args,
+static int fill_mailbox_circular_buffer(uint32_t header_cmd, uint64_t *args,
int len)
{
uint32_t cmd_free_offset;
@@ -167,7 +167,7 @@
}
}
-int mailbox_send_cmd_async(int job_id, unsigned int cmd, uint32_t *args,
+int mailbox_send_cmd_async(int job_id, unsigned int cmd, uint64_t *args,
int len, int urgent)
{
if (urgent)
@@ -184,7 +184,7 @@
return 0;
}
-int mailbox_send_cmd(int job_id, unsigned int cmd, uint32_t *args,
+int mailbox_send_cmd(int job_id, unsigned int cmd, uint64_t *args,
int len, int urgent, uint32_t *response, int resp_len)
{
int status = 0;
@@ -252,7 +252,7 @@
void mailbox_qspi_set_cs(int device_select)
{
- uint32_t cs_setting = device_select;
+ uint64_t cs_setting = device_select;
/* QSPI device select settings at 31:28 */
cs_setting = (cs_setting << 28);
@@ -304,13 +304,13 @@
return ret;
}
-int mailbox_rsu_update(uint32_t *flash_offset)
+int mailbox_rsu_update(uint64_t *flash_offset)
{
return mailbox_send_cmd(MBOX_JOB_ID, MBOX_RSU_UPDATE,
- (uint32_t *)flash_offset, 2, 0, NULL, 0);
+ flash_offset, 2, 0, NULL, 0);
}
-int mailbox_hps_stage_notify(uint32_t execution_stage)
+int mailbox_hps_stage_notify(uint64_t execution_stage)
{
return mailbox_send_cmd(MBOX_JOB_ID, MBOX_HPS_STAGE_NOTIFY,
&execution_stage, 1, 0, NULL, 0);
@@ -336,10 +336,10 @@
return 0;
}
-uint32_t intel_mailbox_get_config_status(uint32_t cmd)
+int intel_mailbox_get_config_status(uint32_t cmd)
{
- uint32_t status, res;
- uint32_t response[6];
+ int status;
+ uint32_t res, response[6];
status = mailbox_send_cmd(1, cmd, NULL, 0, 0, response,
sizeof(response) / sizeof(response[0]));
diff --git a/plat/intel/soc/common/socfpga_psci.c b/plat/intel/soc/common/socfpga_psci.c
index d27ab9f..d48fb5d 100644
--- a/plat/intel/soc/common/socfpga_psci.c
+++ b/plat/intel/soc/common/socfpga_psci.c
@@ -135,7 +135,7 @@
static void __dead2 socfpga_system_reset(void)
{
if (intel_rsu_update_address)
- mailbox_rsu_update((uint32_t *)&intel_rsu_update_address);
+ mailbox_rsu_update(&intel_rsu_update_address);
else
mailbox_reset_cold();
diff --git a/plat/intel/soc/common/socfpga_sip_svc.c b/plat/intel/soc/common/socfpga_sip_svc.c
index 5b600e5..1c3d45b 100644
--- a/plat/intel/soc/common/socfpga_sip_svc.c
+++ b/plat/intel/soc/common/socfpga_sip_svc.c
@@ -61,7 +61,7 @@
static int intel_fpga_sdm_write_buffer(struct fpga_config_info *buffer)
{
- uint32_t args[3];
+ uint64_t args[3];
while (max_blocks > 0 && buffer->size > buffer->size_written) {
args[0] = (1<<8);
@@ -256,7 +256,7 @@
{
if (size > (UINT64_MAX - addr))
return false;
- if (addr < DRAM_BASE)
+ if (addr < BL31_LIMIT)
return false;
if (addr + size > DRAM_BASE + DRAM_SIZE)
return false;
@@ -387,7 +387,7 @@
static uint32_t intel_rsu_notify(uint64_t execution_stage)
{
- if (mailbox_hps_stage_notify((uint32_t)execution_stage) < 0)
+ if (mailbox_hps_stage_notify(execution_stage) < 0)
return INTEL_SIP_SMC_STATUS_ERROR;
return INTEL_SIP_SMC_STATUS_OK;
@@ -404,7 +404,7 @@
}
/* Mailbox services */
-static uint32_t intel_mbox_send_cmd(uint32_t cmd, uint32_t *args, int len,
+static uint32_t intel_mbox_send_cmd(uint32_t cmd, uint64_t *args, int len,
int urgent, uint32_t *response,
int resp_len, int *mbox_status,
int *len_in_resp)
@@ -542,7 +542,7 @@
case INTEL_SIP_SMC_MBOX_SEND_CMD:
x5 = SMC_GET_GP(handle, CTX_GPREG_X5);
x6 = SMC_GET_GP(handle, CTX_GPREG_X6);
- status = intel_mbox_send_cmd(x1, (uint32_t *)x2, x3, x4,
+ status = intel_mbox_send_cmd(x1, (uint64_t *)x2, x3, x4,
(uint32_t *)x5, x6, &mbox_status,
&len_in_resp);
SMC_RET4(handle, status, mbox_status, x5, len_in_resp);
diff --git a/plat/intel/soc/stratix10/bl2_plat_setup.c b/plat/intel/soc/stratix10/bl2_plat_setup.c
index 7d183db..78ca253 100644
--- a/plat/intel/soc/stratix10/bl2_plat_setup.c
+++ b/plat/intel/soc/stratix10/bl2_plat_setup.c
@@ -45,7 +45,7 @@
{0},
};
-boot_source_type boot_source;
+boot_source_type boot_source = BOOT_SOURCE;
void bl2_el3_early_platform_setup(u_register_t x0, u_register_t x1,
u_register_t x2, u_register_t x4)
@@ -58,7 +58,6 @@
if (socfpga_get_handoff(&reverse_handoff_ptr))
return;
config_pinmux(&reverse_handoff_ptr);
- boot_source = reverse_handoff_ptr.boot_source;
config_clkmgr_handoff(&reverse_handoff_ptr);
enable_nonsecure_access();
diff --git a/plat/intel/soc/stratix10/include/socfpga_plat_def.h b/plat/intel/soc/stratix10/include/socfpga_plat_def.h
index 9dc5151..a2bd57b 100644
--- a/plat/intel/soc/stratix10/include/socfpga_plat_def.h
+++ b/plat/intel/soc/stratix10/include/socfpga_plat_def.h
@@ -10,7 +10,8 @@
#include <platform_def.h>
/* Platform Setting */
-#define PLATFORM_MODEL PLAT_SOCFPGA_STRATIX10
+#define PLATFORM_MODEL PLAT_SOCFPGA_STRATIX10
+#define BOOT_SOURCE BOOT_SOURCE_SDMMC
/* Register Mapping */
#define SOCFPGA_MMC_REG_BASE 0xff808000
diff --git a/plat/marvell/a8k/common/mss/mss_a8k.mk b/plat/marvell/a8k/common/mss/mss_a8k.mk
index 58f23d8..efd03c5 100644
--- a/plat/marvell/a8k/common/mss/mss_a8k.mk
+++ b/plat/marvell/a8k/common/mss/mss_a8k.mk
@@ -8,7 +8,8 @@
PLAT_MARVELL := plat/marvell
A8K_MSS_SOURCE := $(PLAT_MARVELL)/a8k/common/mss
-BL2_SOURCES += $(A8K_MSS_SOURCE)/mss_bl2_setup.c
+BL2_SOURCES += $(A8K_MSS_SOURCE)/mss_bl2_setup.c \
+ $(MARVELL_MOCHI_DRV)
BL31_SOURCES += $(A8K_MSS_SOURCE)/mss_pm_ipc.c
diff --git a/plat/marvell/a8k/common/mss/mss_bl2_setup.c b/plat/marvell/a8k/common/mss/mss_bl2_setup.c
index 728ee54..09b8446 100644
--- a/plat/marvell/a8k/common/mss/mss_bl2_setup.c
+++ b/plat/marvell/a8k/common/mss/mss_bl2_setup.c
@@ -74,6 +74,12 @@
/* Set the default target id to PIDI */
mmio_write_32(MVEBU_IO_WIN_BASE(MVEBU_AP0) + IOW_GCR_OFFSET, PIDI_TID);
+ /* Open AMB bridge required for MG access */
+ cp110_amb_init(MVEBU_CP_REGS_BASE(0));
+
+ if (CP_COUNT == 2)
+ cp110_amb_init(MVEBU_CP_REGS_BASE(1));
+
return 0;
}
diff --git a/plat/marvell/common/mss/mss_scp_bl2_format.h b/plat/marvell/common/mss/mss_scp_bl2_format.h
index 7cf8d32..7150f0a 100644
--- a/plat/marvell/common/mss/mss_scp_bl2_format.h
+++ b/plat/marvell/common/mss/mss_scp_bl2_format.h
@@ -8,7 +8,7 @@
#ifndef MSS_SCP_BL2_FORMAT_H
#define MSS_SCP_BL2_FORMAT_H
-#define MAX_NR_OF_FILES 5
+#define MAX_NR_OF_FILES 8
#define FILE_MAGIC 0xddd01ff
#define HEADER_VERSION 0x1
@@ -31,6 +31,7 @@
MSS_CP3,
MG_CP0,
MG_CP1,
+ MG_CP2,
};
typedef struct img_header {
diff --git a/plat/marvell/common/mss/mss_scp_bootloader.c b/plat/marvell/common/mss/mss_scp_bootloader.c
index 7e442c6..4473d81 100644
--- a/plat/marvell/common/mss/mss_scp_bootloader.c
+++ b/plat/marvell/common/mss/mss_scp_bootloader.c
@@ -42,6 +42,8 @@
#define MSS_HANDSHAKE_TIMEOUT 50
+#define MG_CM3_SRAM_BASE(CP) (MVEBU_CP_REGS_BASE(CP) + 0x100000)
+
static int mss_check_image_ready(volatile struct mss_pm_ctrl_block *mss_pm_crtl)
{
int timeout = MSS_HANDSHAKE_TIMEOUT;
@@ -59,6 +61,28 @@
return 0;
}
+static int mg_image_load(uintptr_t src_addr, uint32_t size, uintptr_t mg_regs)
+{
+ if (size > MG_SRAM_SIZE) {
+ ERROR("image is too big to fit into MG CM3 memory\n");
+ return 1;
+ }
+
+ NOTICE("Loading MG image from address 0x%lx Size 0x%x to MG at 0x%lx\n",
+ src_addr, size, mg_regs);
+
+ /* Copy image to MG CM3 SRAM */
+ memcpy((void *)mg_regs, (void *)src_addr, size);
+
+ /*
+ * Don't release MG CM3 from reset - it will be done by next step
+ * bootloader (e.g. U-Boot), when appriopriate device-tree setup (which
+ * has enabeld 802.3. auto-neg) will be choosen.
+ */
+
+ return 0;
+}
+
static int mss_image_load(uint32_t src_addr, uint32_t size, uintptr_t mss_regs)
{
uint32_t i, loop_num, timeout;
@@ -225,12 +249,21 @@
}
break;
case MG_CP0:
- /* TODO: */
- NOTICE("Load image to CP0 MG not supported\n");
- break;
case MG_CP1:
- /* TODO: */
- NOTICE("Load image to CP1 MG not supported\n");
+ case MG_CP2:
+ cp_index = cm3_type - MG_CP0;
+ if (bl2_plat_get_cp_count(0) <= cp_index) {
+ NOTICE("Skipping MG CP%d related image\n",
+ cp_index);
+ break;
+ }
+ NOTICE("Load image to CP%d MG\n", cp_index);
+ ret = mg_image_load(single_img, image_size,
+ MG_CM3_SRAM_BASE(cp_index));
+ if (ret != 0) {
+ ERROR("SCP Image load failed\n");
+ return -1;
+ }
break;
default:
ERROR("SCP_BL2 wrong img format (cm3_type=%d)\n", cm3_type);
@@ -261,7 +294,7 @@
}
if (file_hdr->nr_of_imgs > MAX_NR_OF_FILES) {
- ERROR("SCP_BL2 concatenated image contains to many images\n");
+ ERROR("SCP_BL2 concatenated image contains too many images\n");
return -1;
}
diff --git a/plat/nvidia/tegra/common/drivers/bpmp_ipc/intf.c b/plat/nvidia/tegra/common/drivers/bpmp_ipc/intf.c
index eaf9675..2e90d25 100644
--- a/plat/nvidia/tegra/common/drivers/bpmp_ipc/intf.c
+++ b/plat/nvidia/tegra/common/drivers/bpmp_ipc/intf.c
@@ -175,44 +175,39 @@
if ((p_out == NULL) || (size_out > IVC_DATA_SZ_BYTES) ||
(frame == NULL)) {
ERROR("%s: invalid parameters, exiting\n", __func__);
- ret = -EINVAL;
+ return -EINVAL;
}
- if (ret == 0) {
+ /* prepare the command frame */
+ frame->mrq = mrq;
+ frame->flags = FLAG_DO_ACK;
+ p_fdata = frame->data;
+ (void)memcpy(p_fdata, p_out, (size_t)size_out);
- /* prepare the command frame */
- frame->mrq = mrq;
- frame->flags = FLAG_DO_ACK;
- p_fdata = frame->data;
- (void)memcpy(p_fdata, p_out, (size_t)size_out);
+ /* signal the slave */
+ tegra_bpmp_signal_slave();
- /* signal the slave */
- tegra_bpmp_signal_slave();
-
- /* wait for slave to ack */
- ret = tegra_bpmp_wait_for_slave_ack();
- if (ret != 0) {
- ERROR("failed waiting for the slave to ack\n");
- }
+ /* wait for slave to ack */
+ ret = tegra_bpmp_wait_for_slave_ack();
+ if (ret < 0) {
+ ERROR("%s: wait for slave failed (%d)\n", __func__, ret);
+ return ret;
+ }
- /* retrieve the response frame */
- if ((size_in <= IVC_DATA_SZ_BYTES) && (p_in != NULL) &&
- (ret == 0)) {
+ /* retrieve the response frame */
+ if ((size_in <= IVC_DATA_SZ_BYTES) && (p_in != NULL)) {
- f_in = tegra_bpmp_get_cur_in_frame();
- if (f_in != NULL) {
- ERROR("Failed to get next input frame!\n");
- } else {
- (void)memcpy(p_in, p_fdata, (size_t)size_in);
- }
+ f_in = tegra_bpmp_get_cur_in_frame();
+ if (f_in != NULL) {
+ ERROR("Failed to get next input frame!\n");
+ } else {
+ (void)memcpy(p_in, p_fdata, (size_t)size_in);
}
+ }
- if (ret == 0) {
- ret = tegra_bpmp_free_master();
- if (ret != 0) {
- ERROR("Failed to free master\n");
- }
- }
+ ret = tegra_bpmp_free_master();
+ if (ret < 0) {
+ ERROR("%s: free master failed (%d)\n", __func__, ret);
}
return ret;
diff --git a/plat/nvidia/tegra/common/drivers/spe/shared_console.S b/plat/nvidia/tegra/common/drivers/spe/shared_console.S
index a3e110e..0be34e4 100644
--- a/plat/nvidia/tegra/common/drivers/spe/shared_console.S
+++ b/plat/nvidia/tegra/common/drivers/spe/shared_console.S
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020, NVIDIA Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -10,6 +11,7 @@
#define CONSOLE_FLUSH_DATA_TO_PORT (1 << 26)
#define CONSOLE_RING_DOORBELL (1 << 31)
#define CONSOLE_IS_BUSY (1 << 31)
+#define CONSOLE_TIMEOUT 0xC000 /* approx. 50 ms */
#define CONSOLE_WRITE (CONSOLE_RING_DOORBELL | CONSOLE_FLUSH_DATA_TO_PORT)
/*
@@ -30,6 +32,20 @@
.globl console_spe_flush
.globl console_spe_register
+.macro check_if_console_is_ready base, tmp1, tmp2, label
+ /* wait until spe is ready or timeout expires */
+ mrs \tmp2, cntps_tval_el1
+1: ldr \tmp1, [\base]
+ and \tmp1, \tmp1, #CONSOLE_IS_BUSY
+ cbz \tmp1, 2f
+ mrs \tmp1, cntps_tval_el1
+ sub \tmp1, \tmp2, \tmp1
+ cmp \tmp1, #CONSOLE_TIMEOUT
+ b.lt 1b
+ b \label
+2:
+.endm
+
/* -------------------------------------------------
* int console_spe_register(uintptr_t baseaddr,
* uint32_t clock, uint32_t baud,
@@ -46,6 +62,12 @@
* -------------------------------------------------
*/
func console_spe_register
+ /* Check the input base address */
+ cbz x0, register_fail
+
+ /* Dont use clock or baud rate, so ok to overwrite them */
+ check_if_console_is_ready x0, x1, x2, register_fail
+
cbz x3, register_fail
str x0, [x3, #CONSOLE_T_DRVDATA]
mov x0, x3
@@ -63,7 +85,7 @@
* In : w0 - character to be printed
* x1 - console base address
* Out : return -1 on error else return character.
- * Clobber list : x2
+ * Clobber list : x2, x3
* --------------------------------------------------------
*/
func console_spe_core_putc
@@ -72,12 +94,9 @@
/* Prepend '\r' to '\n' */
cmp w0, #0xA
- b.ne 2f
+ b.ne not_eol
- /* wait until spe is ready */
-1: ldr w2, [x1]
- and w2, w2, #CONSOLE_IS_BUSY
- cbnz w2, 1b
+ check_if_console_is_ready x1, x2, x3, putc_error
/* spe is ready */
mov w2, #0xD /* '\r' */
@@ -86,10 +105,8 @@
orr w2, w2, w3
str w2, [x1]
- /* wait until spe is ready */
-2: ldr w2, [x1]
- and w2, w2, #CONSOLE_IS_BUSY
- cbnz w2, 2b
+not_eol:
+ check_if_console_is_ready x1, x2, x3, putc_error
/* spe is ready */
mov w2, w0
diff --git a/plat/nvidia/tegra/common/tegra_bl31_setup.c b/plat/nvidia/tegra/common/tegra_bl31_setup.c
index 8a49e23..46686c3 100644
--- a/plat/nvidia/tegra/common/tegra_bl31_setup.c
+++ b/plat/nvidia/tegra/common/tegra_bl31_setup.c
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2015-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020, NVIDIA Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -34,8 +35,6 @@
/* length of Trusty's input parameters (in bytes) */
#define TRUSTY_PARAMS_LEN_BYTES (4096*2)
-extern void memcpy16(void *dest, const void *src, unsigned int length);
-
/*******************************************************************************
* Declarations of linker defined symbols which will help us find the layout
* of trusted SRAM
@@ -101,8 +100,6 @@
{
struct tegra_bl31_params *arg_from_bl2 = (struct tegra_bl31_params *) arg0;
plat_params_from_bl2_t *plat_params = (plat_params_from_bl2_t *)arg1;
- image_info_t bl32_img_info = { {0} };
- uint64_t tzdram_start, tzdram_end, bl32_start, bl32_end;
int32_t ret;
/*
@@ -163,20 +160,17 @@
* location to store the boot profiler logs. Sanity check the
* address and initialise the profiler library, if it looks ok.
*/
- if (plat_params->boot_profiler_shmem_base != 0ULL) {
+ ret = bl31_check_ns_address(plat_params->boot_profiler_shmem_base,
+ PROFILER_SIZE_BYTES);
+ if (ret == (int32_t)0) {
- ret = bl31_check_ns_address(plat_params->boot_profiler_shmem_base,
- PROFILER_SIZE_BYTES);
- if (ret == (int32_t)0) {
+ /* store the membase for the profiler lib */
+ plat_bl31_params_from_bl2.boot_profiler_shmem_base =
+ plat_params->boot_profiler_shmem_base;
- /* store the membase for the profiler lib */
- plat_bl31_params_from_bl2.boot_profiler_shmem_base =
- plat_params->boot_profiler_shmem_base;
-
- /* initialise the profiler library */
- boot_profiler_init(plat_params->boot_profiler_shmem_base,
- TEGRA_TMRUS_BASE);
- }
+ /* initialise the profiler library */
+ boot_profiler_init(plat_params->boot_profiler_shmem_base,
+ TEGRA_TMRUS_BASE);
}
/*
@@ -198,41 +192,14 @@
tegra_memctrl_tzdram_setup(plat_bl31_params_from_bl2.tzdram_base,
(uint32_t)plat_bl31_params_from_bl2.tzdram_size);
+#if RELOCATE_BL32_IMAGE
/*
* The previous bootloader might not have placed the BL32 image
- * inside the TZDRAM. We check the BL32 image info to find out
- * the base/PC values and relocate the image if necessary.
+ * inside the TZDRAM. Platform handler to allow relocation of BL32
+ * image to TZDRAM memory. This behavior might change per platform.
*/
- if (arg_from_bl2->bl32_image_info != NULL) {
-
- bl32_img_info = *arg_from_bl2->bl32_image_info;
-
- /* Relocate BL32 if it resides outside of the TZDRAM */
- tzdram_start = plat_bl31_params_from_bl2.tzdram_base;
- tzdram_end = plat_bl31_params_from_bl2.tzdram_base +
- plat_bl31_params_from_bl2.tzdram_size;
- bl32_start = bl32_img_info.image_base;
- bl32_end = bl32_img_info.image_base + bl32_img_info.image_size;
-
- assert(tzdram_end > tzdram_start);
- assert(bl32_end > bl32_start);
- assert(bl32_image_ep_info.pc > tzdram_start);
- assert(bl32_image_ep_info.pc < tzdram_end);
-
- /* relocate BL32 */
- if ((bl32_start >= tzdram_end) || (bl32_end <= tzdram_start)) {
-
- INFO("Relocate BL32 to TZDRAM\n");
-
- (void)memcpy16((void *)(uintptr_t)bl32_image_ep_info.pc,
- (void *)(uintptr_t)bl32_start,
- bl32_img_info.image_size);
-
- /* clean up non-secure intermediate buffer */
- zeromem((void *)(uintptr_t)bl32_start,
- bl32_img_info.image_size);
- }
- }
+ plat_relocate_bl32_image(arg_from_bl2->bl32_image_info);
+#endif
/*
* Add timestamp for platform early setup exit.
diff --git a/plat/nvidia/tegra/common/tegra_delay_timer.c b/plat/nvidia/tegra/common/tegra_delay_timer.c
index 63dcf41..cfd9a15 100644
--- a/plat/nvidia/tegra/common/tegra_delay_timer.c
+++ b/plat/nvidia/tegra/common/tegra_delay_timer.c
@@ -1,31 +1,59 @@
/*
* Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020, NVIDIA Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <arch.h>
+
#include <drivers/delay_timer.h>
#include <lib/mmio.h>
+#include <lib/utils_def.h>
+#include <plat/common/platform.h>
#include <tegra_def.h>
#include <tegra_private.h>
-static uint32_t tegra_timerus_get_value(void)
+static uint32_t tegra_timer_get_value(void)
{
- return mmio_read_32(TEGRA_TMRUS_BASE);
+ /* enable cntps_tval_el1 timer, mask interrupt */
+ write_cntps_ctl_el1(CNTP_CTL_IMASK_BIT | CNTP_CTL_ENABLE_BIT);
+
+ /*
+ * Generic delay timer implementation expects the timer to be a down
+ * counter. We apply bitwise NOT operator to the tick values returned
+ * by read_cntps_tval_el1() to simulate the down counter. The value is
+ * clipped from 64 to 32 bits.
+ */
+ return (uint32_t)(~read_cntps_tval_el1());
}
/*
- * Initialise the on-chip free rolling us counter as the delay
- * timer.
+ * Initialise the architecture provided counter as the delay timer.
*/
void tegra_delay_timer_init(void)
{
- static const timer_ops_t tegra_timer_ops = {
- .get_timer_value = tegra_timerus_get_value,
- .clk_mult = 1,
- .clk_div = 1,
- };
+ static timer_ops_t tegra_timer_ops;
+
+ /* Value in ticks */
+ uint32_t multiplier = MHZ_TICKS_PER_SEC;
+
+ /* Value in ticks per second (Hz) */
+ uint32_t divider = plat_get_syscnt_freq2();
+
+ /* Reduce multiplier and divider by dividing them repeatedly by 10 */
+ while (((multiplier % 10U) == 0U) && ((divider % 10U) == 0U)) {
+ multiplier /= 10U;
+ divider /= 10U;
+ }
+
+ /* enable cntps_tval_el1 timer, mask interrupt */
+ write_cntps_ctl_el1(CNTP_CTL_IMASK_BIT | CNTP_CTL_ENABLE_BIT);
+ /* register the timer */
+ tegra_timer_ops.get_timer_value = tegra_timer_get_value;
+ tegra_timer_ops.clk_mult = multiplier;
+ tegra_timer_ops.clk_div = divider;
timer_init(&tegra_timer_ops);
}
diff --git a/plat/nvidia/tegra/common/tegra_pm.c b/plat/nvidia/tegra/common/tegra_pm.c
index 1f59f30..5ec6f84 100644
--- a/plat/nvidia/tegra/common/tegra_pm.c
+++ b/plat/nvidia/tegra/common/tegra_pm.c
@@ -259,7 +259,7 @@
/*******************************************************************************
* Export the platform handlers to enable psci to invoke them
******************************************************************************/
-static const plat_psci_ops_t tegra_plat_psci_ops = {
+static plat_psci_ops_t tegra_plat_psci_ops = {
.cpu_standby = tegra_cpu_standby,
.pwr_domain_on = tegra_pwr_domain_on,
.pwr_domain_off = tegra_pwr_domain_off,
@@ -296,6 +296,14 @@
(void)tegra_soc_pwr_domain_on_finish(&target_state);
/*
+ * Disable System Suspend if the platform does not
+ * support it
+ */
+ if (!plat_supports_system_suspend()) {
+ tegra_plat_psci_ops.get_sys_suspend_power_state = NULL;
+ }
+
+ /*
* Initialize PSCI ops struct
*/
*psci_ops = &tegra_plat_psci_ops;
diff --git a/plat/nvidia/tegra/include/tegra_private.h b/plat/nvidia/tegra/include/tegra_private.h
index b419d94..ad3cee4 100644
--- a/plat/nvidia/tegra/include/tegra_private.h
+++ b/plat/nvidia/tegra/include/tegra_private.h
@@ -9,6 +9,7 @@
#define TEGRA_PRIVATE_H
#include <platform_def.h>
+#include <stdbool.h>
#include <arch.h>
#include <arch_helpers.h>
@@ -77,6 +78,8 @@
plat_params_from_bl2_t *plat_get_bl31_plat_params(void);
void plat_early_platform_setup(void);
void plat_late_platform_setup(void);
+void plat_relocate_bl32_image(const image_info_t *bl32_img_info);
+bool plat_supports_system_suspend(void);
/* Declarations for plat_secondary.c */
void plat_secondary_setup(void);
diff --git a/plat/nvidia/tegra/platform.mk b/plat/nvidia/tegra/platform.mk
index 0917d87..d0ed5d5 100644
--- a/plat/nvidia/tegra/platform.mk
+++ b/plat/nvidia/tegra/platform.mk
@@ -1,5 +1,6 @@
#
# Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2020, NVIDIA Corporation. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -37,9 +38,19 @@
# remove the standard libc
OVERRIDE_LIBC := 1
+# Flag to enable WDT FIQ interrupt handling for Tegra SoCs
+# prior to Tegra186
+ENABLE_WDT_LEGACY_FIQ_HANDLING ?= 0
+
+# Flag to allow relocation of BL32 image to TZDRAM during boot
+RELOCATE_BL32_IMAGE ?= 0
+
include plat/nvidia/tegra/common/tegra_common.mk
include ${SOC_DIR}/platform_${TARGET_SOC}.mk
+$(eval $(call add_define,ENABLE_WDT_LEGACY_FIQ_HANDLING))
+$(eval $(call add_define,RELOCATE_BL32_IMAGE))
+
# modify BUILD_PLAT to point to SoC specific build directory
BUILD_PLAT := ${BUILD_BASE}/${PLAT}/${TARGET_SOC}/${BUILD_TYPE}
diff --git a/plat/nvidia/tegra/soc/t132/plat_setup.c b/plat/nvidia/tegra/soc/t132/plat_setup.c
index 2f54dd5..4bfc2de 100644
--- a/plat/nvidia/tegra/soc/t132/plat_setup.c
+++ b/plat/nvidia/tegra/soc/t132/plat_setup.c
@@ -154,3 +154,11 @@
{
; /* do nothing */
}
+
+/*******************************************************************************
+ * Handler to indicate support for System Suspend
+ ******************************************************************************/
+bool plat_supports_system_suspend(void)
+{
+ return true;
+}
diff --git a/plat/nvidia/tegra/soc/t186/plat_setup.c b/plat/nvidia/tegra/soc/t186/plat_setup.c
index 7e18b5c..06a3284 100644
--- a/plat/nvidia/tegra/soc/t186/plat_setup.c
+++ b/plat/nvidia/tegra/soc/t186/plat_setup.c
@@ -12,6 +12,7 @@
#include <bl31/interrupt_mgmt.h>
#include <common/bl_common.h>
#include <common/debug.h>
+#include <common/ep_info.h>
#include <common/interrupt_props.h>
#include <context.h>
#include <cortex_a57.h>
@@ -20,6 +21,7 @@
#include <drivers/arm/gicv2.h>
#include <drivers/console.h>
#include <lib/el3_runtime/context_mgmt.h>
+#include <lib/utils.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
#include <plat/common/platform.h>
@@ -28,6 +30,8 @@
#include <tegra_platform.h>
#include <tegra_private.h>
+extern void memcpy16(void *dest, const void *src, unsigned int length);
+
/*******************************************************************************
* Tegra186 CPU numbers in cluster #0
*******************************************************************************
@@ -286,3 +290,50 @@
return ret;
}
+
+/*******************************************************************************
+ * Handler to relocate BL32 image to TZDRAM
+ ******************************************************************************/
+void plat_relocate_bl32_image(const image_info_t *bl32_img_info)
+{
+ const plat_params_from_bl2_t *plat_bl31_params = plat_get_bl31_plat_params();
+ const entry_point_info_t *bl32_ep_info = bl31_plat_get_next_image_ep_info(SECURE);
+ uint64_t tzdram_start, tzdram_end, bl32_start, bl32_end;
+
+ if ((bl32_img_info != NULL) && (bl32_ep_info != NULL)) {
+
+ /* Relocate BL32 if it resides outside of the TZDRAM */
+ tzdram_start = plat_bl31_params->tzdram_base;
+ tzdram_end = plat_bl31_params->tzdram_base +
+ plat_bl31_params->tzdram_size;
+ bl32_start = bl32_img_info->image_base;
+ bl32_end = bl32_img_info->image_base + bl32_img_info->image_size;
+
+ assert(tzdram_end > tzdram_start);
+ assert(bl32_end > bl32_start);
+ assert(bl32_ep_info->pc > tzdram_start);
+ assert(bl32_ep_info->pc < tzdram_end);
+
+ /* relocate BL32 */
+ if ((bl32_start >= tzdram_end) || (bl32_end <= tzdram_start)) {
+
+ INFO("Relocate BL32 to TZDRAM\n");
+
+ (void)memcpy16((void *)(uintptr_t)bl32_ep_info->pc,
+ (void *)(uintptr_t)bl32_start,
+ bl32_img_info->image_size);
+
+ /* clean up non-secure intermediate buffer */
+ zeromem((void *)(uintptr_t)bl32_start,
+ bl32_img_info->image_size);
+ }
+ }
+}
+
+/*******************************************************************************
+ * Handler to indicate support for System Suspend
+ ******************************************************************************/
+bool plat_supports_system_suspend(void)
+{
+ return true;
+}
diff --git a/plat/nvidia/tegra/soc/t186/platform_t186.mk b/plat/nvidia/tegra/soc/t186/platform_t186.mk
index fe15853..197e4c6 100644
--- a/plat/nvidia/tegra/soc/t186/platform_t186.mk
+++ b/plat/nvidia/tegra/soc/t186/platform_t186.mk
@@ -1,5 +1,6 @@
#
# Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2020, NVIDIA Corporation. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -17,6 +18,8 @@
COLD_BOOT_SINGLE_CPU := 1
+RELOCATE_BL32_IMAGE := 1
+
# platform settings
TZDRAM_BASE := 0x30000000
$(eval $(call add_define,TZDRAM_BASE))
@@ -64,3 +67,6 @@
ERRATA_A57_828024 := 1
ERRATA_A57_829520 := 1
ERRATA_A57_833471 := 1
+
+# Enable higher performance Non-cacheable load forwarding
+A57_ENABLE_NONCACHEABLE_LOAD_FWD := 1
diff --git a/plat/nvidia/tegra/soc/t194/plat_memctrl.c b/plat/nvidia/tegra/soc/t194/plat_memctrl.c
index bb1dd67..2208b85 100644
--- a/plat/nvidia/tegra/soc/t194/plat_memctrl.c
+++ b/plat/nvidia/tegra/soc/t194/plat_memctrl.c
@@ -145,13 +145,13 @@
* Array to hold the security configs for stream IDs
******************************************************************************/
const static mc_streamid_security_cfg_t tegra194_streamid_sec_cfgs[] = {
- mc_make_sec_cfg(HDAR, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(HOST1XDMAR, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(NVENCSRD, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(SATAR, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(NVENCSWR, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(HDAW, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(SATAW, NON_SECURE, OVERRIDE, ENABLE),
+ mc_make_sec_cfg(HDAR, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(HOST1XDMAR, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(NVENCSRD, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(SATAR, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(NVENCSWR, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(HDAW, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(SATAW, NON_SECURE, OVERRIDE, DISABLE),
mc_make_sec_cfg(ISPRA, NON_SECURE, NO_OVERRIDE, ENABLE),
mc_make_sec_cfg(ISPFALR, NON_SECURE, NO_OVERRIDE, ENABLE),
mc_make_sec_cfg(ISPWA, NON_SECURE, NO_OVERRIDE, ENABLE),
@@ -160,115 +160,115 @@
mc_make_sec_cfg(XUSB_HOSTW, NON_SECURE, NO_OVERRIDE, ENABLE),
mc_make_sec_cfg(XUSB_DEVR, NON_SECURE, NO_OVERRIDE, ENABLE),
mc_make_sec_cfg(XUSB_DEVW, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(TSECSRD, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(TSECSWR, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(SDMMCRA, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(SDMMCR, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(SDMMCRAB, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(SDMMCWA, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(SDMMCW, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(SDMMCWAB, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(VICSRD, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(VICSWR, NON_SECURE, NO_OVERRIDE, ENABLE),
+ mc_make_sec_cfg(TSECSRD, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(TSECSWR, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(SDMMCRA, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(SDMMCR, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(SDMMCRAB, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(SDMMCWA, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(SDMMCW, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(SDMMCWAB, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(VICSRD, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(VICSWR, NON_SECURE, NO_OVERRIDE, DISABLE),
mc_make_sec_cfg(VIW, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(NVDECSRD, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(NVDECSWR, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(APER, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(APEW, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(NVJPGSRD, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(NVJPGSWR, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(SESRD, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(SESWR, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(AXIAPR, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(AXIAPW, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(ETRR, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(ETRW, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(TSECSRDB, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(TSECSWRB, NON_SECURE, NO_OVERRIDE, ENABLE),
+ mc_make_sec_cfg(NVDECSRD, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(NVDECSWR, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(APER, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(APEW, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(NVJPGSRD, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(NVJPGSWR, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(SESRD, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(SESWR, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(AXIAPR, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(AXIAPW, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(ETRR, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(ETRW, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(TSECSRDB, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(TSECSWRB, NON_SECURE, NO_OVERRIDE, DISABLE),
mc_make_sec_cfg(AXISR, SECURE, NO_OVERRIDE, DISABLE),
mc_make_sec_cfg(AXISW, SECURE, NO_OVERRIDE, DISABLE),
- mc_make_sec_cfg(EQOSR, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(EQOSW, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(UFSHCR, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(UFSHCW, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(NVDISPLAYR, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(BPMPR, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(BPMPW, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(BPMPDMAR, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(BPMPDMAW, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(AONR, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(AONW, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(AONDMAR, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(AONDMAW, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(SCER, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(SCEW, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(SCEDMAR, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(SCEDMAW, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(APEDMAR, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(APEDMAW, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(NVDISPLAYR1, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(VICSRD1, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(NVDECSRD1, NON_SECURE, NO_OVERRIDE, ENABLE),
+ mc_make_sec_cfg(EQOSR, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(EQOSW, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(UFSHCR, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(UFSHCW, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(NVDISPLAYR, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(BPMPR, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(BPMPW, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(BPMPDMAR, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(BPMPDMAW, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(AONR, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(AONW, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(AONDMAR, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(AONDMAW, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(SCER, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(SCEW, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(SCEDMAR, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(SCEDMAW, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(APEDMAR, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(APEDMAW, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(NVDISPLAYR1, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(VICSRD1, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(NVDECSRD1, NON_SECURE, NO_OVERRIDE, DISABLE),
mc_make_sec_cfg(VIFALR, NON_SECURE, NO_OVERRIDE, ENABLE),
mc_make_sec_cfg(VIFALW, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(DLA0RDA, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(DLA0FALRDB, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(DLA0WRA, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(DLA0FALWRB, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(DLA1RDA, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(DLA1FALRDB, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(DLA1WRA, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(DLA1FALWRB, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA0RDA, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA0RDB, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA0RDC, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA0WRA, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA0WRB, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA0WRC, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA1RDA, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA1RDB, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA1RDC, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA1WRA, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA1WRB, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA1WRC, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(RCER, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(RCEW, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(RCEDMAR, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(RCEDMAW, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(NVENC1SRD, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(NVENC1SWR, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PCIE0R, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(PCIE0W, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(PCIE1R, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(PCIE1W, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(PCIE2AR, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(PCIE2AW, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(PCIE3R, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(PCIE3W, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(PCIE4R, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(PCIE4W, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(PCIE5R, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(PCIE5W, NON_SECURE, OVERRIDE, ENABLE),
+ mc_make_sec_cfg(DLA0RDA, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(DLA0FALRDB, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(DLA0WRA, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(DLA0FALWRB, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(DLA1RDA, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(DLA1FALRDB, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(DLA1WRA, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(DLA1FALWRB, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA0RDA, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA0RDB, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA0RDC, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA0WRA, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA0WRB, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA0WRC, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA1RDA, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA1RDB, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA1RDC, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA1WRA, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA1WRB, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA1WRC, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(RCER, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(RCEW, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(RCEDMAR, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(RCEDMAW, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(NVENC1SRD, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(NVENC1SWR, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PCIE0R, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PCIE0W, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PCIE1R, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PCIE1W, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PCIE2AR, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PCIE2AW, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PCIE3R, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PCIE3W, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PCIE4R, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PCIE4W, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PCIE5R, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PCIE5W, NON_SECURE, OVERRIDE, DISABLE),
mc_make_sec_cfg(ISPFALW, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(DLA0RDA1, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(DLA1RDA1, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA0RDA1, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA0RDB1, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA1RDA1, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PVA1RDB1, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PCIE5R1, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(NVENCSRD1, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(NVENC1SRD1, NON_SECURE, NO_OVERRIDE, ENABLE),
+ mc_make_sec_cfg(DLA0RDA1, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(DLA1RDA1, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA0RDA1, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA0RDB1, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA1RDA1, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PVA1RDB1, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(PCIE5R1, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(NVENCSRD1, NON_SECURE, NO_OVERRIDE, DISABLE),
+ mc_make_sec_cfg(NVENC1SRD1, NON_SECURE, NO_OVERRIDE, DISABLE),
mc_make_sec_cfg(ISPRA1, NON_SECURE, NO_OVERRIDE, ENABLE),
- mc_make_sec_cfg(PCIE0R1, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(MIU0R, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(MIU0W, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(MIU1R, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(MIU1W, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(MIU2R, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(MIU2W, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(MIU3R, NON_SECURE, OVERRIDE, ENABLE),
- mc_make_sec_cfg(MIU3W, NON_SECURE, OVERRIDE, ENABLE),
+ mc_make_sec_cfg(PCIE0R1, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(MIU0R, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(MIU0W, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(MIU1R, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(MIU1W, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(MIU2R, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(MIU2W, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(MIU3R, NON_SECURE, OVERRIDE, DISABLE),
+ mc_make_sec_cfg(MIU3W, NON_SECURE, OVERRIDE, DISABLE)
};
/* To be called by common memctrl_v2.c */
diff --git a/plat/nvidia/tegra/soc/t194/plat_setup.c b/plat/nvidia/tegra/soc/t194/plat_setup.c
index 912dcc6..3640ade 100644
--- a/plat/nvidia/tegra/soc/t194/plat_setup.c
+++ b/plat/nvidia/tegra/soc/t194/plat_setup.c
@@ -304,6 +304,9 @@
return (plat_params_from_bl2_t *)(uintptr_t)val;
}
+/*******************************************************************************
+ * Handler for late platform setup
+ ******************************************************************************/
void plat_late_platform_setup(void)
{
#if ENABLE_STRICT_CHECKING_MODE
@@ -314,3 +317,11 @@
mce_enable_strict_checking();
#endif
}
+
+/*******************************************************************************
+ * Handler to indicate support for System Suspend
+ ******************************************************************************/
+bool plat_supports_system_suspend(void)
+{
+ return true;
+}
diff --git a/plat/nvidia/tegra/soc/t210/plat_psci_handlers.c b/plat/nvidia/tegra/soc/t210/plat_psci_handlers.c
index 4ef9558..832b8d6 100644
--- a/plat/nvidia/tegra/soc/t210/plat_psci_handlers.c
+++ b/plat/nvidia/tegra/soc/t210/plat_psci_handlers.c
@@ -394,6 +394,15 @@
*/
tegra_reset_all_dma_masters();
+ /*
+ * Mark PMC as accessible to the non-secure world
+ * to allow the COP to execute System Suspend
+ * sequence
+ */
+ val = mmio_read_32(TEGRA_MISC_BASE + APB_SLAVE_SECURITY_ENABLE);
+ val &= ~PMC_SECURITY_EN_BIT;
+ mmio_write_32(TEGRA_MISC_BASE + APB_SLAVE_SECURITY_ENABLE, val);
+
/* clean up IRAM of any cruft */
zeromem((void *)(uintptr_t)TEGRA_IRAM_BASE,
TEGRA_IRAM_A_SIZE);
@@ -480,12 +489,14 @@
tegra_bpmp_resume();
}
- /* sc7entry-fw is part of TZDRAM area */
if (plat_params->sc7entry_fw_base != 0U) {
+ /* sc7entry-fw is part of TZDRAM area */
offset = plat_params->tzdram_base - plat_params->sc7entry_fw_base;
tegra_memctrl_tzdram_setup(plat_params->sc7entry_fw_base,
plat_params->tzdram_size + offset);
+ }
+ if (!tegra_chipid_is_t210_b01()) {
/* restrict PMC access to secure world */
val = mmio_read_32(TEGRA_MISC_BASE + APB_SLAVE_SECURITY_ENABLE);
val |= PMC_SECURITY_EN_BIT;
@@ -533,10 +544,11 @@
tegra_fc_lock_active_cluster();
/*
- * Resume PMC hardware block for Tegra210 platforms supporting sc7entry-fw
- */
- if (!tegra_chipid_is_t210_b01() && (plat_params->sc7entry_fw_base != 0U))
+ * Resume PMC hardware block for Tegra210 platforms
+ */
+ if (!tegra_chipid_is_t210_b01()) {
tegra_pmc_resume();
+ }
return PSCI_E_SUCCESS;
}
diff --git a/plat/nvidia/tegra/soc/t210/plat_setup.c b/plat/nvidia/tegra/soc/t210/plat_setup.c
index da1f1b3..c32772d 100644
--- a/plat/nvidia/tegra/soc/t210/plat_setup.c
+++ b/plat/nvidia/tegra/soc/t210/plat_setup.c
@@ -236,6 +236,13 @@
val |= PMC_SECURITY_EN_BIT;
mmio_write_32(TEGRA_MISC_BASE + APB_SLAVE_SECURITY_ENABLE, val);
}
+
+ if (!tegra_chipid_is_t210_b01()) {
+ /* restrict PMC access to secure world */
+ val = mmio_read_32(TEGRA_MISC_BASE + APB_SLAVE_SECURITY_ENABLE);
+ val |= PMC_SECURITY_EN_BIT;
+ mmio_write_32(TEGRA_MISC_BASE + APB_SLAVE_SECURITY_ENABLE, val);
+ }
}
/*******************************************************************************
@@ -255,3 +262,21 @@
*/
tegra_fc_enable_fiq_to_ccplex_routing();
}
+/*******************************************************************************
+ * Handler to indicate support for System Suspend
+ ******************************************************************************/
+bool plat_supports_system_suspend(void)
+{
+ const plat_params_from_bl2_t *plat_params = bl31_get_plat_params();
+
+ /*
+ * sc7entry-fw is only supported by Tegra210 SoCs.
+ */
+ if (!tegra_chipid_is_t210_b01() && (plat_params->sc7entry_fw_base != 0U)) {
+ return true;
+ } else if (tegra_chipid_is_t210_b01()) {
+ return true;
+ } else {
+ return false;
+ }
+}
diff --git a/plat/nvidia/tegra/soc/t210/platform_t210.mk b/plat/nvidia/tegra/soc/t210/platform_t210.mk
index 4f2db53..0d27bcd 100644
--- a/plat/nvidia/tegra/soc/t210/platform_t210.mk
+++ b/plat/nvidia/tegra/soc/t210/platform_t210.mk
@@ -57,3 +57,6 @@
# Skip L1 $ flush when powering down Cortex-A57 CPUs
SKIP_A57_L1_FLUSH_PWR_DWN := 1
+
+# Enable higher performance Non-cacheable load forwarding
+A57_ENABLE_NONCACHEABLE_LOAD_FWD := 1
diff --git a/plat/renesas/rcar/bl2_plat_setup.c b/plat/renesas/rcar/bl2_plat_setup.c
index 578892e..8910967 100644
--- a/plat/renesas/rcar/bl2_plat_setup.c
+++ b/plat/renesas/rcar/bl2_plat_setup.c
@@ -16,6 +16,8 @@
#include <common/debug.h>
#include <common/desc_image_load.h>
#include <drivers/console.h>
+#include <drivers/io/io_driver.h>
+#include <drivers/io/io_storage.h>
#include <lib/mmio.h>
#include <lib/xlat_tables/xlat_tables_defs.h>
#include <plat/common/platform.h>
@@ -33,6 +35,7 @@
#endif
#include "io_common.h"
+#include "io_rcar.h"
#include "qos_init.h"
#include "rcar_def.h"
#include "rcar_private.h"
@@ -382,10 +385,28 @@
return 0;
}
+static uint64_t rcar_get_dest_addr_from_cert(uint32_t certid, uintptr_t *dest)
+{
+ uint32_t cert, len;
+ int ret;
+
+ ret = rcar_get_certificate(certid, &cert);
+ if (ret) {
+ ERROR("%s : cert file load error", __func__);
+ return 1;
+ }
+
+ rcar_read_certificate((uint64_t) cert, &len, dest);
+
+ return 0;
+}
+
int bl2_plat_handle_post_image_load(unsigned int image_id)
{
static bl2_to_bl31_params_mem_t *params;
bl_mem_params_node_t *bl_mem_params;
+ uintptr_t dest;
+ int ret;
if (!params) {
params = (bl2_to_bl31_params_mem_t *) PARAMS_BASE;
@@ -396,8 +417,17 @@
switch (image_id) {
case BL31_IMAGE_ID:
+ ret = rcar_get_dest_addr_from_cert(SOC_FW_CONTENT_CERT_ID,
+ &dest);
+ if (!ret)
+ bl_mem_params->image_info.image_base = dest;
break;
case BL32_IMAGE_ID:
+ ret = rcar_get_dest_addr_from_cert(TRUSTED_OS_FW_CONTENT_CERT_ID,
+ &dest);
+ if (!ret)
+ bl_mem_params->image_info.image_base = dest;
+
memcpy(¶ms->bl32_ep_info, &bl_mem_params->ep_info,
sizeof(entry_point_info_t));
break;
diff --git a/plat/renesas/rcar/include/rcar_version.h b/plat/renesas/rcar/include/rcar_version.h
index 2d400e0..67cbd71 100644
--- a/plat/renesas/rcar/include/rcar_version.h
+++ b/plat/renesas/rcar/include/rcar_version.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -9,8 +9,8 @@
#include <arch_helpers.h>
-#define VERSION_OF_RENESAS "2.0.4"
-#define VERSION_OF_RENESAS_MAXLEN (128)
+#define VERSION_OF_RENESAS "2.0.6"
+#define VERSION_OF_RENESAS_MAXLEN 128
extern const uint8_t version_of_renesas[VERSION_OF_RENESAS_MAXLEN];
diff --git a/plat/rockchip/common/drivers/parameter/ddr_parameter.h b/plat/rockchip/common/drivers/parameter/ddr_parameter.h
index 61349c4..25c93a1 100644
--- a/plat/rockchip/common/drivers/parameter/ddr_parameter.h
+++ b/plat/rockchip/common/drivers/parameter/ddr_parameter.h
@@ -35,8 +35,8 @@
uint64_t ns_top[DDR_REGION_NR_MAX];
uint32_t s_nr;
- uint64_t s_base[DDR_REGION_NR_MAX];
- uint64_t s_top[DDR_REGION_NR_MAX];
+ uint64_t s_base[DDR_REGION_NR_MAX + 1];
+ uint64_t s_top[DDR_REGION_NR_MAX + 1];
};
struct param_ddr_usage ddr_region_usage_parse(uint64_t addr, uint64_t max_mb);
diff --git a/plat/socionext/uniphier/tsp/uniphier_tsp_setup.c b/plat/socionext/uniphier/tsp/uniphier_tsp_setup.c
index 4f58b68..091a6f7 100644
--- a/plat/socionext/uniphier/tsp/uniphier_tsp_setup.c
+++ b/plat/socionext/uniphier/tsp/uniphier_tsp_setup.c
@@ -4,16 +4,25 @@
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <errno.h>
+
#include <platform_def.h>
#include <common/bl_common.h>
#include <lib/xlat_tables/xlat_mmu_helpers.h>
+#include <plat/common/platform.h>
#include "../uniphier.h"
+static unsigned int uniphier_soc = UNIPHIER_SOC_UNKNOWN;
+
void tsp_early_platform_setup(void)
{
- uniphier_console_setup();
+ uniphier_soc = uniphier_get_soc_id();
+ if (uniphier_soc == UNIPHIER_SOC_UNKNOWN)
+ plat_error_handler(-ENOTSUP);
+
+ uniphier_console_setup(uniphier_soc);
}
void tsp_platform_setup(void)
@@ -22,6 +31,6 @@
void tsp_plat_arch_setup(void)
{
- uniphier_mmap_setup();
+ uniphier_mmap_setup(uniphier_soc);
enable_mmu_el1(0);
}
diff --git a/plat/socionext/uniphier/uniphier.h b/plat/socionext/uniphier/uniphier.h
index 729dc5c..ee520ad 100644
--- a/plat/socionext/uniphier/uniphier.h
+++ b/plat/socionext/uniphier/uniphier.h
@@ -25,7 +25,8 @@
#define UNIPHIER_BOOT_DEVICE_EMMC 0
#define UNIPHIER_BOOT_DEVICE_NAND 1
#define UNIPHIER_BOOT_DEVICE_NOR 2
-#define UNIPHIER_BOOT_DEVICE_USB 3
+#define UNIPHIER_BOOT_DEVICE_SD 3
+#define UNIPHIER_BOOT_DEVICE_USB 4
#define UNIPHIER_BOOT_DEVICE_RSV 0xffffffff
unsigned int uniphier_get_boot_master(unsigned int soc);
@@ -34,11 +35,13 @@
#define UNIPHIER_BOOT_MASTER_SCP 1
#define UNIPHIER_BOOT_MASTER_EXT 2
-void uniphier_console_setup(void);
+void uniphier_console_setup(unsigned int soc);
struct io_block_dev_spec;
-int uniphier_emmc_init(struct io_block_dev_spec **block_dev_spec);
-int uniphier_nand_init(struct io_block_dev_spec **block_dev_spec);
+int uniphier_emmc_init(unsigned int soc,
+ struct io_block_dev_spec **block_dev_spec);
+int uniphier_nand_init(unsigned int soc,
+ struct io_block_dev_spec **block_dev_spec);
int uniphier_usb_init(unsigned int soc,
struct io_block_dev_spec **block_dev_spec);
@@ -54,7 +57,7 @@
void uniphier_scp_system_off(void);
void uniphier_scp_system_reset(void);
-void uniphier_mmap_setup(void);
+void uniphier_mmap_setup(unsigned int soc);
void uniphier_cci_init(unsigned int soc);
void uniphier_cci_enable(void);
@@ -66,6 +69,8 @@
void uniphier_gic_cpuif_disable(void);
void uniphier_gic_pcpu_init(void);
+void uniphier_psci_init(unsigned int soc);
+
unsigned int uniphier_calc_core_pos(u_register_t mpidr);
#endif /* UNIPHIER_H */
diff --git a/plat/socionext/uniphier/uniphier_bl2_setup.c b/plat/socionext/uniphier/uniphier_bl2_setup.c
index 11d837c..7a7f786 100644
--- a/plat/socionext/uniphier/uniphier_bl2_setup.c
+++ b/plat/socionext/uniphier/uniphier_bl2_setup.c
@@ -25,39 +25,37 @@
#define UNIPHIER_IMAGE_BUF_SIZE 0x00100000UL
static uintptr_t uniphier_mem_base = UNIPHIER_MEM_BASE;
+static unsigned int uniphier_soc = UNIPHIER_SOC_UNKNOWN;
static int uniphier_bl2_kick_scp;
void bl2_el3_early_platform_setup(u_register_t x0, u_register_t x1,
u_register_t x2, u_register_t x3)
{
- uniphier_console_setup();
+ uniphier_soc = uniphier_get_soc_id();
+ if (uniphier_soc == UNIPHIER_SOC_UNKNOWN)
+ plat_error_handler(-ENOTSUP);
+
+ uniphier_console_setup(uniphier_soc);
}
void bl2_el3_plat_arch_setup(void)
{
- unsigned int soc;
int skip_scp = 0;
int ret;
- uniphier_mmap_setup();
+ uniphier_mmap_setup(uniphier_soc);
enable_mmu_el3(0);
/* add relocation offset (run-time-address - link-address) */
uniphier_mem_base += BL_CODE_BASE - BL2_BASE;
- soc = uniphier_get_soc_id();
- if (soc == UNIPHIER_SOC_UNKNOWN) {
- ERROR("unsupported SoC\n");
- plat_error_handler(-ENOTSUP);
- }
-
- ret = uniphier_io_setup(soc, uniphier_mem_base);
+ ret = uniphier_io_setup(uniphier_soc, uniphier_mem_base);
if (ret) {
ERROR("failed to setup io devices\n");
plat_error_handler(ret);
}
- switch (uniphier_get_boot_master(soc)) {
+ switch (uniphier_get_boot_master(uniphier_soc)) {
case UNIPHIER_BOOT_MASTER_THIS:
INFO("Booting from this SoC\n");
skip_scp = 1;
diff --git a/plat/socionext/uniphier/uniphier_bl31_setup.c b/plat/socionext/uniphier/uniphier_bl31_setup.c
index 47f2378..f2f0b29 100644
--- a/plat/socionext/uniphier/uniphier_bl31_setup.c
+++ b/plat/socionext/uniphier/uniphier_bl31_setup.c
@@ -21,6 +21,7 @@
static entry_point_info_t bl32_image_ep_info;
static entry_point_info_t bl33_image_ep_info;
+static unsigned int uniphier_soc = UNIPHIER_SOC_UNKNOWN;
entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
{
@@ -37,7 +38,11 @@
bl_params_node_t *bl_params = ((bl_params_t *)from_bl2)->head;
- uniphier_console_setup();
+ uniphier_soc = uniphier_get_soc_id();
+ if (uniphier_soc == UNIPHIER_SOC_UNKNOWN)
+ plat_error_handler(-ENOTSUP);
+
+ uniphier_console_setup(uniphier_soc);
while (bl_params) {
if (bl_params->image_id == BL32_IMAGE_ID)
@@ -53,32 +58,34 @@
panic();
}
-#define UNIPHIER_SYS_CNTCTL_BASE 0x60E00000
+static const uintptr_t uniphier_cntctl_base[] = {
+ [UNIPHIER_SOC_LD11] = 0x60e00000,
+ [UNIPHIER_SOC_LD20] = 0x60e00000,
+ [UNIPHIER_SOC_PXS3] = 0x60e00000,
+};
void bl31_platform_setup(void)
{
- unsigned int soc;
+ uintptr_t cntctl_base;
- soc = uniphier_get_soc_id();
- if (soc == UNIPHIER_SOC_UNKNOWN) {
- ERROR("unsupported SoC\n");
- plat_error_handler(-ENOTSUP);
- }
-
- uniphier_cci_init(soc);
+ uniphier_cci_init(uniphier_soc);
uniphier_cci_enable();
/* Initialize the GIC driver, cpu and distributor interfaces */
- uniphier_gic_driver_init(soc);
+ uniphier_gic_driver_init(uniphier_soc);
uniphier_gic_init();
+ assert(uniphier_soc < ARRAY_SIZE(uniphier_cntctl_base));
+ cntctl_base = uniphier_cntctl_base[uniphier_soc];
+
/* Enable and initialize the System level generic timer */
- mmio_write_32(UNIPHIER_SYS_CNTCTL_BASE + CNTCR_OFF,
- CNTCR_FCREQ(0U) | CNTCR_EN);
+ mmio_write_32(cntctl_base + CNTCR_OFF, CNTCR_FCREQ(0U) | CNTCR_EN);
+
+ uniphier_psci_init(uniphier_soc);
}
void bl31_plat_arch_setup(void)
{
- uniphier_mmap_setup();
+ uniphier_mmap_setup(uniphier_soc);
enable_mmu_el3(0);
}
diff --git a/plat/socionext/uniphier/uniphier_boot_device.c b/plat/socionext/uniphier/uniphier_boot_device.c
index 462c085..36a9908 100644
--- a/plat/socionext/uniphier/uniphier_boot_device.c
+++ b/plat/socionext/uniphier/uniphier_boot_device.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -13,22 +13,29 @@
#include "uniphier.h"
-#define UNIPHIER_PINMON0 0x5f900100
-#define UNIPHIER_PINMON2 0x5f900108
+#define UNIPHIER_PINMON0 0x0
+#define UNIPHIER_PINMON2 0x8
-static int uniphier_ld11_is_usb_boot(uint32_t pinmon)
+static const uintptr_t uniphier_pinmon_base[] = {
+ [UNIPHIER_SOC_LD11] = 0x5f900100,
+ [UNIPHIER_SOC_LD20] = 0x5f900100,
+ [UNIPHIER_SOC_PXS3] = 0x5f900100,
+};
+
+static bool uniphier_ld11_is_usb_boot(uint32_t pinmon)
{
return !!(~pinmon & 0x00000080);
}
-static int uniphier_ld20_is_usb_boot(uint32_t pinmon)
+static bool uniphier_ld20_is_usb_boot(uint32_t pinmon)
{
return !!(~pinmon & 0x00000780);
}
-static int uniphier_pxs3_is_usb_boot(uint32_t pinmon)
+static bool uniphier_pxs3_is_usb_boot(uint32_t pinmon)
{
- uint32_t pinmon2 = mmio_read_32(UNIPHIER_PINMON2);
+ uintptr_t pinmon_base = uniphier_pinmon_base[UNIPHIER_SOC_PXS3];
+ uint32_t pinmon2 = mmio_read_32(pinmon_base + UNIPHIER_PINMON2);
return !!(pinmon2 & BIT(31));
}
@@ -106,20 +113,25 @@
}
struct uniphier_boot_device_info {
- int (*is_usb_boot)(uint32_t pinmon);
+ bool have_boot_swap;
+ bool (*is_sd_boot)(uint32_t pinmon);
+ bool (*is_usb_boot)(uint32_t pinmon);
unsigned int (*get_boot_device)(uint32_t pinmon);
};
static const struct uniphier_boot_device_info uniphier_boot_device_info[] = {
[UNIPHIER_SOC_LD11] = {
+ .have_boot_swap = true,
.is_usb_boot = uniphier_ld11_is_usb_boot,
.get_boot_device = uniphier_ld11_get_boot_device,
},
[UNIPHIER_SOC_LD20] = {
+ .have_boot_swap = true,
.is_usb_boot = uniphier_ld20_is_usb_boot,
.get_boot_device = uniphier_ld11_get_boot_device,
},
[UNIPHIER_SOC_PXS3] = {
+ .have_boot_swap = true,
.is_usb_boot = uniphier_pxs3_is_usb_boot,
.get_boot_device = uniphier_pxs3_get_boot_device,
},
@@ -128,17 +140,24 @@
unsigned int uniphier_get_boot_device(unsigned int soc)
{
const struct uniphier_boot_device_info *info;
+ uintptr_t pinmon_base;
uint32_t pinmon;
assert(soc < ARRAY_SIZE(uniphier_boot_device_info));
info = &uniphier_boot_device_info[soc];
- pinmon = mmio_read_32(UNIPHIER_PINMON0);
+ assert(soc < ARRAY_SIZE(uniphier_boot_device_info));
+ pinmon_base = uniphier_pinmon_base[soc];
+
+ pinmon = mmio_read_32(pinmon_base + UNIPHIER_PINMON0);
- if (!(pinmon & BIT(29)))
+ if (info->have_boot_swap && !(pinmon & BIT(29)))
return UNIPHIER_BOOT_DEVICE_NOR;
- if (info->is_usb_boot(pinmon))
+ if (info->is_sd_boot && info->is_sd_boot(pinmon))
+ return UNIPHIER_BOOT_DEVICE_SD;
+
+ if (info->is_usb_boot && info->is_usb_boot(pinmon))
return UNIPHIER_BOOT_DEVICE_USB;
return info->get_boot_device(pinmon);
@@ -155,7 +174,12 @@
assert(soc < ARRAY_SIZE(uniphier_have_onchip_scp));
if (uniphier_have_onchip_scp[soc]) {
- if (mmio_read_32(UNIPHIER_PINMON0) & BIT(27))
+ uintptr_t pinmon_base;
+
+ assert(soc < ARRAY_SIZE(uniphier_boot_device_info));
+ pinmon_base = uniphier_pinmon_base[soc];
+
+ if (mmio_read_32(pinmon_base + UNIPHIER_PINMON0) & BIT(27))
return UNIPHIER_BOOT_MASTER_THIS;
else
return UNIPHIER_BOOT_MASTER_SCP;
diff --git a/plat/socionext/uniphier/uniphier_console_setup.c b/plat/socionext/uniphier/uniphier_console_setup.c
index 64ee797..1851e4d 100644
--- a/plat/socionext/uniphier/uniphier_console_setup.c
+++ b/plat/socionext/uniphier/uniphier_console_setup.c
@@ -1,9 +1,11 @@
/*
- * Copyright (c) 2019, Socionext Inc. All rights reserved.
+ * Copyright (c) 2019-2020, Socionext Inc. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <assert.h>
+
#include <drivers/console.h>
#include <errno.h>
#include <lib/mmio.h>
@@ -12,9 +14,8 @@
#include "uniphier.h"
#include "uniphier_console.h"
-#define UNIPHIER_UART_BASE 0x54006800
-#define UNIPHIER_UART_END 0x54006c00
#define UNIPHIER_UART_OFFSET 0x100
+#define UNIPHIER_UART_NR_PORTS 4
struct uniphier_console {
struct console console;
@@ -40,16 +41,26 @@
},
};
+static const uintptr_t uniphier_uart_base[] = {
+ [UNIPHIER_SOC_LD11] = 0x54006800,
+ [UNIPHIER_SOC_LD20] = 0x54006800,
+ [UNIPHIER_SOC_PXS3] = 0x54006800,
+};
+
/*
* There are 4 UART ports available on this platform. By default, we want to
* use the same one as used in the previous firmware stage.
*/
-static uintptr_t uniphier_console_get_base(void)
+static uintptr_t uniphier_console_get_base(unsigned int soc)
{
- uintptr_t base = UNIPHIER_UART_BASE;
+ uintptr_t base, end;
uint32_t div;
- while (base < UNIPHIER_UART_END) {
+ assert(soc < ARRAY_SIZE(uniphier_uart_base));
+ base = uniphier_uart_base[soc];
+ end = base + UNIPHIER_UART_OFFSET * UNIPHIER_UART_NR_PORTS;
+
+ while (base < end) {
div = mmio_read_32(base + UNIPHIER_UART_DLR);
if (div)
return base;
@@ -66,11 +77,11 @@
UNIPHIER_UART_LCR_WLEN8 << 8);
}
-void uniphier_console_setup(void)
+void uniphier_console_setup(unsigned int soc)
{
uintptr_t base;
- base = uniphier_console_get_base();
+ base = uniphier_console_get_base(soc);
if (!base)
plat_error_handler(-EINVAL);
diff --git a/plat/socionext/uniphier/uniphier_emmc.c b/plat/socionext/uniphier/uniphier_emmc.c
index d666ba7..b3d23cb 100644
--- a/plat/socionext/uniphier/uniphier_emmc.c
+++ b/plat/socionext/uniphier/uniphier_emmc.c
@@ -87,7 +87,12 @@
unsigned int is_data;
};
-static int uniphier_emmc_block_addressing;
+struct uniphier_emmc_host {
+ uintptr_t base;
+ bool is_block_addressing;
+};
+
+static struct uniphier_emmc_host uniphier_emmc_host;
static int uniphier_emmc_send_cmd(uintptr_t host_base,
struct uniphier_mmc_cmd *cmd)
@@ -157,7 +162,8 @@
return uniphier_emmc_send_cmd(host_base, &cmd);
}
-static int uniphier_emmc_is_over_2gb(uintptr_t host_base)
+static int uniphier_emmc_check_device_size(uintptr_t host_base,
+ bool *is_block_addressing)
{
struct uniphier_mmc_cmd cmd = {0};
uint32_t csd40, csd72; /* CSD[71:40], CSD[103:72] */
@@ -174,7 +180,10 @@
csd40 = mmio_read_32(host_base + SDHCI_RESPONSE + 4);
csd72 = mmio_read_32(host_base + SDHCI_RESPONSE + 8);
- return !(~csd40 & 0xffc00380) && !(~csd72 & 0x3);
+ /* C_SIZE == 0xfff && C_SIZE_MULT == 0x7 ? */
+ *is_block_addressing = !(~csd40 & 0xffc00380) && !(~csd72 & 0x3);
+
+ return 0;
}
static int uniphier_emmc_load_image(uintptr_t host_base,
@@ -210,15 +219,15 @@
static size_t uniphier_emmc_read(int lba, uintptr_t buf, size_t size)
{
- uintptr_t host_base = 0x5a000200;
int ret;
inv_dcache_range(buf, size);
- if (!uniphier_emmc_block_addressing)
+ if (!uniphier_emmc_host.is_block_addressing)
lba *= 512;
- ret = uniphier_emmc_load_image(host_base, lba, buf, size / 512);
+ ret = uniphier_emmc_load_image(uniphier_emmc_host.base,
+ lba, buf, size / 512);
inv_dcache_range(buf, size);
@@ -232,10 +241,10 @@
.block_size = 512,
};
-static int uniphier_emmc_hw_init(void)
+static int uniphier_emmc_hw_init(struct uniphier_emmc_host *host)
{
- uintptr_t host_base = 0x5a000200;
struct uniphier_mmc_cmd cmd = {0};
+ uintptr_t host_base = uniphier_emmc_host.base;
int ret;
/*
@@ -253,12 +262,11 @@
while (mmio_read_8(host_base + SDHCI_SOFTWARE_RESET))
;
- ret = uniphier_emmc_is_over_2gb(host_base);
- if (ret < 0)
+ ret = uniphier_emmc_check_device_size(host_base,
+ &uniphier_emmc_host.is_block_addressing);
+ if (ret)
return ret;
- uniphier_emmc_block_addressing = ret;
-
cmd.cmdarg = UNIPHIER_EMMC_RCA << 16;
/* select card again */
@@ -274,11 +282,23 @@
return 0;
}
+static const uintptr_t uniphier_emmc_base[] = {
+ [UNIPHIER_SOC_LD11] = 0x5a000200,
+ [UNIPHIER_SOC_LD20] = 0x5a000200,
+ [UNIPHIER_SOC_PXS3] = 0x5a000200,
+};
+
-int uniphier_emmc_init(struct io_block_dev_spec **block_dev_spec)
+int uniphier_emmc_init(unsigned int soc,
+ struct io_block_dev_spec **block_dev_spec)
{
int ret;
- ret = uniphier_emmc_hw_init();
+ assert(soc < ARRAY_SIZE(uniphier_emmc_base));
+ uniphier_emmc_host.base = uniphier_emmc_base[soc];
+ if (uniphier_emmc_host.base == 0UL)
+ return -ENOTSUP;
+
+ ret = uniphier_emmc_hw_init(&uniphier_emmc_host);
if (ret)
return ret;
diff --git a/plat/socionext/uniphier/uniphier_io_storage.c b/plat/socionext/uniphier/uniphier_io_storage.c
index 89c8718..96180f1 100644
--- a/plat/socionext/uniphier/uniphier_io_storage.c
+++ b/plat/socionext/uniphier/uniphier_io_storage.c
@@ -249,24 +249,24 @@
return io_dev_open(uniphier_fip_dev_con, 0, &uniphier_fip_dev_handle);
}
-static int uniphier_io_emmc_setup(unsigned int soc_id, size_t buffer_offset)
+static int uniphier_io_emmc_setup(unsigned int soc, size_t buffer_offset)
{
struct io_block_dev_spec *block_dev_spec;
int ret;
- ret = uniphier_emmc_init(&block_dev_spec);
+ ret = uniphier_emmc_init(soc, &block_dev_spec);
if (ret)
return ret;
return uniphier_io_block_setup(0x20000, block_dev_spec, buffer_offset);
}
-static int uniphier_io_nand_setup(unsigned int soc_id, size_t buffer_offset)
+static int uniphier_io_nand_setup(unsigned int soc, size_t buffer_offset)
{
struct io_block_dev_spec *block_dev_spec;
int ret;
- ret = uniphier_nand_init(&block_dev_spec);
+ ret = uniphier_nand_init(soc, &block_dev_spec);
if (ret)
return ret;
diff --git a/plat/socionext/uniphier/uniphier_nand.c b/plat/socionext/uniphier/uniphier_nand.c
index 3925177..71cb96c 100644
--- a/plat/socionext/uniphier/uniphier_nand.c
+++ b/plat/socionext/uniphier/uniphier_nand.c
@@ -4,6 +4,7 @@
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <assert.h>
#include <stdint.h>
#include <platform_def.h>
@@ -237,8 +238,7 @@
for (i = 0; i < ARRAY_SIZE(nand->bbt); i++)
nand->bbt[i] = UNIPHIER_NAND_BBT_UNKNOWN;
- nand->host_base = 0x68000000;
- nand->reg_base = 0x68100000;
+ nand->reg_base = nand->host_base + 0x100000;
nand->pages_per_block =
mmio_read_32(nand->reg_base + DENALI_PAGES_PER_BLOCK);
@@ -255,10 +255,22 @@
return 0;
}
-int uniphier_nand_init(struct io_block_dev_spec **block_dev_spec)
+static const uintptr_t uniphier_nand_base[] = {
+ [UNIPHIER_SOC_LD11] = 0x68000000,
+ [UNIPHIER_SOC_LD20] = 0x68000000,
+ [UNIPHIER_SOC_PXS3] = 0x68000000,
+};
+
+int uniphier_nand_init(unsigned int soc,
+ struct io_block_dev_spec **block_dev_spec)
{
int ret;
+ assert(soc < ARRAY_SIZE(uniphier_nand_base));
+ uniphier_nand.host_base = uniphier_nand_base[soc];
+ if (!uniphier_nand.host_base)
+ return -ENOTSUP;
+
ret = uniphier_nand_hw_init(&uniphier_nand);
if (ret)
return ret;
diff --git a/plat/socionext/uniphier/uniphier_psci.c b/plat/socionext/uniphier/uniphier_psci.c
index 2acc874..a371705 100644
--- a/plat/socionext/uniphier/uniphier_psci.c
+++ b/plat/socionext/uniphier/uniphier_psci.c
@@ -1,9 +1,11 @@
/*
- * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <assert.h>
+
#include <arch_helpers.h>
#include <common/debug.h>
#include <errno.h>
@@ -12,15 +14,18 @@
#include "uniphier.h"
-#define UNIPHIER_ROM_RSV0 0x59801200
+#define UNIPHIER_ROM_RSV0 0x0
-#define UNIPHIER_SLFRSTSEL 0x61843010
+#define UNIPHIER_SLFRSTSEL 0x10
#define UNIPHIER_SLFRSTSEL_MASK GENMASK(1, 0)
-#define UNIPHIER_SLFRSTCTL 0x61843014
+#define UNIPHIER_SLFRSTCTL 0x14
#define UNIPHIER_SLFRSTCTL_RST BIT(0)
#define MPIDR_AFFINITY_INVALID ((u_register_t)-1)
+static uintptr_t uniphier_rom_rsv_base;
+static uintptr_t uniphier_slfrst_base;
+
uintptr_t uniphier_sec_entrypoint;
void uniphier_warmboot_entrypoint(void);
@@ -34,7 +39,7 @@
flush_dcache_range((uint64_t)&uniphier_holding_pen_release,
sizeof(uniphier_holding_pen_release));
- mmio_write_64(UNIPHIER_ROM_RSV0,
+ mmio_write_64(uniphier_rom_rsv_base + UNIPHIER_ROM_RSV0,
(uint64_t)&uniphier_warmboot_entrypoint);
sev();
@@ -71,8 +76,10 @@
static void uniphier_self_system_reset(void)
{
- mmio_clrbits_32(UNIPHIER_SLFRSTSEL, UNIPHIER_SLFRSTSEL_MASK);
- mmio_setbits_32(UNIPHIER_SLFRSTCTL, UNIPHIER_SLFRSTCTL_RST);
+ mmio_clrbits_32(uniphier_slfrst_base + UNIPHIER_SLFRSTSEL,
+ UNIPHIER_SLFRSTSEL_MASK);
+ mmio_setbits_32(uniphier_slfrst_base + UNIPHIER_SLFRSTCTL,
+ UNIPHIER_SLFRSTCTL_RST);
}
static void __dead2 uniphier_psci_system_off(void)
@@ -114,13 +121,40 @@
int plat_setup_psci_ops(uintptr_t sec_entrypoint,
const struct plat_psci_ops **psci_ops)
{
- unsigned int soc;
+ uniphier_sec_entrypoint = sec_entrypoint;
+ flush_dcache_range((uint64_t)&uniphier_sec_entrypoint,
+ sizeof(uniphier_sec_entrypoint));
- soc = uniphier_get_soc_id();
- if (soc == UNIPHIER_SOC_UNKNOWN) {
- ERROR("unsupported SoC\n");
- return -ENOTSUP;
- }
+ *psci_ops = &uniphier_psci_ops;
+
+ return 0;
+}
+
+struct uniphier_psci_ctrl_base {
+ uintptr_t rom_rsv_base;
+ uintptr_t slfrst_base;
+};
+
+static const struct uniphier_psci_ctrl_base uniphier_psci_ctrl_base[] = {
+ [UNIPHIER_SOC_LD11] = {
+ .rom_rsv_base = 0x59801200,
+ .slfrst_base = 0x61843000,
+ },
+ [UNIPHIER_SOC_LD20] = {
+ .rom_rsv_base = 0x59801200,
+ .slfrst_base = 0x61843000,
+ },
+ [UNIPHIER_SOC_PXS3] = {
+ .rom_rsv_base = 0x59801200,
+ .slfrst_base = 0x61843000,
+ },
+};
+
+void uniphier_psci_init(unsigned int soc)
+{
+ assert(soc < ARRAY_SIZE(uniphier_psci_ctrl_base));
+ uniphier_rom_rsv_base = uniphier_psci_ctrl_base[soc].rom_rsv_base;
+ uniphier_slfrst_base = uniphier_psci_ctrl_base[soc].slfrst_base;
if (uniphier_get_boot_master(soc) == UNIPHIER_BOOT_MASTER_SCP) {
uniphier_psci_scp_mode = uniphier_scp_is_running();
@@ -130,12 +164,4 @@
if (uniphier_psci_scp_mode)
uniphier_scp_open_com();
}
-
- uniphier_sec_entrypoint = sec_entrypoint;
- flush_dcache_range((uint64_t)&uniphier_sec_entrypoint,
- sizeof(uniphier_sec_entrypoint));
-
- *psci_ops = &uniphier_psci_ops;
-
- return 0;
}
diff --git a/plat/socionext/uniphier/uniphier_xlat_setup.c b/plat/socionext/uniphier/uniphier_xlat_setup.c
index 18d2f9e..66c7834 100644
--- a/plat/socionext/uniphier/uniphier_xlat_setup.c
+++ b/plat/socionext/uniphier/uniphier_xlat_setup.c
@@ -4,15 +4,36 @@
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <assert.h>
+
#include <platform_def.h>
#include <common/debug.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
+#include "uniphier.h"
+
-#define UNIPHIER_REG_REGION_BASE 0x50000000ULL
-#define UNIPHIER_REG_REGION_SIZE 0x20000000ULL
+struct uniphier_reg_region {
+ uintptr_t base;
+ size_t size;
+};
-void uniphier_mmap_setup(void)
+static const struct uniphier_reg_region uniphier_reg_region[] = {
+ [UNIPHIER_SOC_LD11] = {
+ .base = 0x50000000UL,
+ .size = 0x20000000UL,
+ },
+ [UNIPHIER_SOC_LD20] = {
+ .base = 0x50000000UL,
+ .size = 0x20000000UL,
+ },
+ [UNIPHIER_SOC_PXS3] = {
+ .base = 0x50000000UL,
+ .size = 0x20000000UL,
+ },
+};
+
+void uniphier_mmap_setup(unsigned int soc)
{
VERBOSE("Trusted RAM seen by this BL image: %p - %p\n",
(void *)BL_CODE_BASE, (void *)BL_END);
@@ -35,8 +56,10 @@
MT_DEVICE | MT_RW | MT_SECURE);
/* register region */
- mmap_add_region(UNIPHIER_REG_REGION_BASE, UNIPHIER_REG_REGION_BASE,
- UNIPHIER_REG_REGION_SIZE,
+ assert(soc < ARRAY_SIZE(uniphier_reg_region));
+ mmap_add_region(uniphier_reg_region[soc].base,
+ uniphier_reg_region[soc].base,
+ uniphier_reg_region[soc].size,
MT_DEVICE | MT_RW | MT_SECURE);
init_xlat_tables();
diff --git a/services/arm_arch_svc/arm_arch_svc_setup.c b/services/arm_arch_svc/arm_arch_svc_setup.c
index 1fc7827..6dac56e 100644
--- a/services/arm_arch_svc/arm_arch_svc_setup.c
+++ b/services/arm_arch_svc/arm_arch_svc_setup.c
@@ -66,7 +66,7 @@
return 0;
#else
/* Either the CPUs are unaffected or permanently mitigated */
- return SMCCC_ARCH_NOT_REQUIRED;
+ return SMC_ARCH_CALL_NOT_REQUIRED;
#endif
}
#endif
diff --git a/services/spd/trusty/generic-arm64-smcall.c b/services/spd/trusty/generic-arm64-smcall.c
index dfc3e71..5c3a628 100644
--- a/services/spd/trusty/generic-arm64-smcall.c
+++ b/services/spd/trusty/generic-arm64-smcall.c
@@ -12,6 +12,22 @@
#include "generic-arm64-smcall.h"
+#ifndef PLAT_ARM_GICD_BASE
+#ifdef GICD_BASE
+#define PLAT_ARM_GICD_BASE GICD_BASE
+#define PLAT_ARM_GICC_BASE GICC_BASE
+#ifdef GICR_BASE
+#define PLAT_ARM_GICR_BASE GICR_BASE
+#endif
+#else
+#error PLAT_ARM_GICD_BASE or GICD_BASE must be defined
+#endif
+#endif
+
+#ifndef PLAT_ARM_GICR_BASE
+#define PLAT_ARM_GICR_BASE SMC_UNK
+#endif
+
int trusty_disable_serial_debug;
struct dputc_state {
@@ -48,12 +64,15 @@
static uint64_t trusty_get_reg_base(uint32_t reg)
{
switch (reg) {
- case 0:
+ case SMC_GET_GIC_BASE_GICD:
return PLAT_ARM_GICD_BASE;
- case 1:
+ case SMC_GET_GIC_BASE_GICC:
return PLAT_ARM_GICC_BASE;
+ case SMC_GET_GIC_BASE_GICR:
+ return PLAT_ARM_GICR_BASE;
+
default:
NOTICE("%s(0x%x) unknown reg\n", __func__, reg);
return SMC_UNK;
diff --git a/services/spd/trusty/generic-arm64-smcall.h b/services/spd/trusty/generic-arm64-smcall.h
index 06efc72..ac03469 100644
--- a/services/spd/trusty/generic-arm64-smcall.h
+++ b/services/spd/trusty/generic-arm64-smcall.h
@@ -23,5 +23,6 @@
*/
#define SMC_GET_GIC_BASE_GICD 0
#define SMC_GET_GIC_BASE_GICC 1
+#define SMC_GET_GIC_BASE_GICR 2
#define SMC_FC_GET_REG_BASE SMC_FASTCALL_NR(SMC_ENTITY_PLATFORM_MONITOR, 0x1)
#define SMC_FC64_GET_REG_BASE SMC_FASTCALL64_NR(SMC_ENTITY_PLATFORM_MONITOR, 0x1)
diff --git a/services/spd/trusty/trusty.c b/services/spd/trusty/trusty.c
index d6c092c..092ffa8 100644
--- a/services/spd/trusty/trusty.c
+++ b/services/spd/trusty/trusty.c
@@ -390,6 +390,10 @@
void plat_trusty_set_boot_args(aapcs64_params_t *args);
+#if !defined(TSP_SEC_MEM_SIZE) && defined(BL32_MEM_SIZE)
+#define TSP_SEC_MEM_SIZE BL32_MEM_SIZE
+#endif
+
#ifdef TSP_SEC_MEM_SIZE
#pragma weak plat_trusty_set_boot_args
void plat_trusty_set_boot_args(aapcs64_params_t *args)
diff --git a/services/spd/tspd/tspd_main.c b/services/spd/tspd/tspd_main.c
index f206724..b0cbf62 100644
--- a/services/spd/tspd/tspd_main.c
+++ b/services/spd/tspd/tspd_main.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -126,7 +126,7 @@
* interrupt handling.
*/
if (get_yield_smc_active_flag(tsp_ctx->state)) {
- tsp_ctx->saved_spsr_el3 = SMC_GET_EL3(&tsp_ctx->cpu_ctx,
+ tsp_ctx->saved_spsr_el3 = (uint32_t)SMC_GET_EL3(&tsp_ctx->cpu_ctx,
CTX_SPSR_EL3);
tsp_ctx->saved_elr_el3 = SMC_GET_EL3(&tsp_ctx->cpu_ctx,
CTX_ELR_EL3);