feat(plat/st): use FIP to load images
BL2 still uses the STM32 header binary format to be loaded from ROM code.
BL32 and BL33 and their respective device tree files are now put together
in a FIP file.
One DTB is created for each BL. To reduce their sizes, 2 new dtsi file are
in charge of removing useless nodes for a given BL. This is done because
BL2 and BL32 share the same device tree files base.
The previous way of booting is still available, the compilation flag
STM32MP_USE_STM32IMAGE has to be set to 1 in the make command. Some files
are duplicated and their names modified with _stm32_ to avoid too much
switches in the code.
Change-Id: I1ffada0af58486d4cf6044511b51e56b52269817
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
diff --git a/plat/st/stm32mp1/plat_image_load.c b/plat/st/stm32mp1/plat_image_load.c
index 6d7af74..36a3a1c 100644
--- a/plat/st/stm32mp1/plat_image_load.c
+++ b/plat/st/stm32mp1/plat_image_load.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2016-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -23,12 +23,14 @@
******************************************************************************/
bl_load_info_t *plat_get_bl_image_load_info(void)
{
+#if STM32MP_USE_STM32IMAGE
bl_mem_params_node_t *bl33 = get_bl_mem_params_node(BL33_IMAGE_ID);
uint32_t ddr_ns_size = stm32mp_get_ddr_ns_size();
/* Max size is non-secure DDR end address minus image_base */
bl33->image_info.image_max_size = STM32MP_DDR_BASE + ddr_ns_size -
bl33->image_info.image_base;
+#endif /* STM32MP_USE_STM32IMAGE */
return get_bl_load_info_from_mem_params_desc();
}
@@ -38,5 +40,9 @@
******************************************************************************/
bl_params_t *plat_get_next_bl_params(void)
{
- return get_next_bl_params_from_mem_params_desc();
+ bl_params_t *bl_params = get_next_bl_params_from_mem_params_desc();
+
+ populate_next_bl_params_config(bl_params);
+
+ return bl_params;
}