diff --git a/bl31/aarch64/crash_reporting.S b/bl31/aarch64/crash_reporting.S
index 4570514..e69878b 100644
--- a/bl31/aarch64/crash_reporting.S
+++ b/bl31/aarch64/crash_reporting.S
@@ -52,6 +52,9 @@
 print_spacer:
 	.asciz	" =\t\t0x"
 
+cpu_ectlr_reg:
+	.asciz	"cpuectlr_el1 =\t\t0x"
+
 gp_regs:
 	.asciz	"x0", "x1", "x2", "x3", "x4", "x5", "x6", "x7",\
 		"x8", "x9", "x10", "x11", "x12", "x13", "x14", "x15",\
@@ -334,9 +337,28 @@
 	mrs	x10, sp_el0
 	bl	str_in_crash_buf_print
 
+	/* Print the CPUECTLR_EL1 reg */
+	mrs	x0, midr_el1
+	lsr	x0, x0, #MIDR_PN_SHIFT
+	and	x0, x0, #MIDR_PN_MASK
+	cmp	x0, #MIDR_PN_A57
+	b.eq	1f
+	cmp	x0, #MIDR_PN_A53
+	b.ne	2f
+1:
+	adr	x4, cpu_ectlr_reg
+	bl	asm_print_str
+	mrs	x4, CPUECTLR_EL1
+	bl	asm_print_hex
+	bl	print_newline
+2:
+
 	/* Print the gic registers */
 	plat_print_gic_regs
 
+	/* Print the interconnect registers */
+	plat_print_interconnect_regs
+
 	/* Done reporting */
 	b	crash_panic
 
diff --git a/docs/porting-guide.md b/docs/porting-guide.md
index 9002a99..82dcf9d 100644
--- a/docs/porting-guide.md
+++ b/docs/porting-guide.md
@@ -275,10 +275,18 @@
 *   **Macro : plat_print_gic_regs**
 
     This macro allows the crash reporting routine to print GIC registers
-    in case of an unhandled IRQ or FIQ in BL3-1. This aids in debugging and
+    in case of an unhandled exception in BL3-1. This aids in debugging and
     this macro can be defined to be empty in case GIC register reporting is
     not desired.
 
+*   **Macro : plat_print_interconnect_regs**
+
+    This macro allows the crash reporting routine to print interconnect registers
+    in case of an unhandled exception in BL3-1. This aids in debugging and
+    this macro can be defined to be empty in case interconnect register reporting
+    is not desired. In the ARM FVP port, the CCI snoop control registers are
+    reported.
+
 ### Other mandatory modifications
 
 The following mandatory modifications may be implemented in any file
diff --git a/include/drivers/arm/cci400.h b/include/drivers/arm/cci400.h
index 7222391..6246e48 100644
--- a/include/drivers/arm/cci400.h
+++ b/include/drivers/arm/cci400.h
@@ -65,8 +65,11 @@
 /* Status register bit definitions */
 #define CHANGE_PENDING_BIT		(1 << 0)
 
+#ifndef __ASSEMBLY__
+
 /* Function declarations */
 void cci_enable_coherency(unsigned long mpidr);
 void cci_disable_coherency(unsigned long mpidr);
 
+#endif /* __ASSEMBLY__ */
 #endif /* __CCI_400_H__ */
diff --git a/plat/fvp/include/plat_macros.S b/plat/fvp/include/plat_macros.S
index 728ee1e..727b958 100644
--- a/plat/fvp/include/plat_macros.S
+++ b/plat/fvp/include/plat_macros.S
@@ -27,9 +27,10 @@
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */
-
+#include <cci400.h>
 #include <gic_v2.h>
 #include <plat_config.h>
+#include "platform_def.h"
 
 .section .rodata.gic_reg_name, "aS"
 gic_regs:
@@ -79,3 +80,26 @@
 	b	2b
 1:
 	.endm
+
+.section .rodata.cci_reg_name, "aS"
+cci_iface_regs:
+	.asciz "cci_snoop_ctrl_cluster0", "cci_snoop_ctrl_cluster1" , ""
+
+	/* ------------------------------------------------
+	 * The below macro prints out relevant interconnect
+	 * registers whenever an unhandled exception is
+	 * taken in BL31.
+	 * Clobbers: x0 - x9, sp
+	 * ------------------------------------------------
+	 */
+	.macro plat_print_interconnect_regs
+	adr	x6, cci_iface_regs
+	/* Store in x7 the base address of the first interface */
+	mov_imm	x7, (CCI400_BASE + SLAVE_IFACE3_OFFSET)
+	ldr	w8, [x7, #SNOOP_CTRL_REG]
+	/* Store in x7 the base address of the second interface */
+	mov_imm	x7, (CCI400_BASE + SLAVE_IFACE4_OFFSET)
+	ldr	w9, [x7, #SNOOP_CTRL_REG]
+	/* Store to the crash buf and print to console */
+	bl	str_in_crash_buf_print
+	.endm