diff --git a/lib/psci/psci_suspend.c b/lib/psci/psci_suspend.c
new file mode 100644
index 0000000..ee1ccef
--- /dev/null
+++ b/lib/psci/psci_suspend.c
@@ -0,0 +1,284 @@
+/*
+ * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <assert.h>
+#include <bl_common.h>
+#include <arch.h>
+#include <arch_helpers.h>
+#include <context.h>
+#include <context_mgmt.h>
+#include <cpu_data.h>
+#include <debug.h>
+#include <platform.h>
+#include <runtime_svc.h>
+#include <stddef.h>
+#include "psci_private.h"
+
+/*******************************************************************************
+ * This function does generic and platform specific operations after a wake-up
+ * from standby/retention states at multiple power levels.
+ ******************************************************************************/
+static void psci_suspend_to_standby_finisher(unsigned int cpu_idx,
+					     psci_power_state_t *state_info,
+					     unsigned int end_pwrlvl)
+{
+	psci_acquire_pwr_domain_locks(end_pwrlvl,
+				cpu_idx);
+
+	/*
+	 * Plat. management: Allow the platform to do operations
+	 * on waking up from retention.
+	 */
+	psci_plat_pm_ops->pwr_domain_suspend_finish(state_info);
+
+	/*
+	 * Set the requested and target state of this CPU and all the higher
+	 * power domain levels for this CPU to run.
+	 */
+	psci_set_pwr_domains_to_run(end_pwrlvl);
+
+	psci_release_pwr_domain_locks(end_pwrlvl,
+				cpu_idx);
+}
+
+/*******************************************************************************
+ * This function does generic and platform specific suspend to power down
+ * operations.
+ ******************************************************************************/
+static void psci_suspend_to_pwrdown_start(unsigned int end_pwrlvl,
+					  entry_point_info_t *ep,
+					  psci_power_state_t *state_info)
+{
+	unsigned int max_off_lvl = psci_find_max_off_lvl(state_info);
+
+	/* Save PSCI target power level for the suspend finisher handler */
+	psci_set_suspend_pwrlvl(end_pwrlvl);
+
+	/*
+	 * Flush the target power level as it will be accessed on power up with
+	 * Data cache disabled.
+	 */
+	flush_cpu_data(psci_svc_cpu_data.target_pwrlvl);
+
+	/*
+	 * Call the cpu suspend handler registered by the Secure Payload
+	 * Dispatcher to let it do any book-keeping. If the handler encounters an
+	 * error, it's expected to assert within
+	 */
+	if (psci_spd_pm && psci_spd_pm->svc_suspend)
+		psci_spd_pm->svc_suspend(max_off_lvl);
+
+	/*
+	 * Store the re-entry information for the non-secure world.
+	 */
+	cm_init_my_context(ep);
+
+	/*
+	 * Arch. management. Perform the necessary steps to flush all
+	 * cpu caches. Currently we assume that the power level correspond
+	 * the cache level.
+	 * TODO : Introduce a mechanism to query the cache level to flush
+	 * and the cpu-ops power down to perform from the platform.
+	 */
+	psci_do_pwrdown_cache_maintenance(max_off_lvl);
+}
+
+/*******************************************************************************
+ * Top level handler which is called when a cpu wants to suspend its execution.
+ * It is assumed that along with suspending the cpu power domain, power domains
+ * at higher levels until the target power level will be suspended as well. It
+ * coordinates with the platform to negotiate the target state for each of
+ * the power domain level till the target power domain level. It then performs
+ * generic, architectural, platform setup and state management required to
+ * suspend that power domain level and power domain levels below it.
+ * e.g. For a cpu that's to be suspended, it could mean programming the
+ * power controller whereas for a cluster that's to be suspended, it will call
+ * the platform specific code which will disable coherency at the interconnect
+ * level if the cpu is the last in the cluster and also the program the power
+ * controller.
+ *
+ * All the required parameter checks are performed at the beginning and after
+ * the state transition has been done, no further error is expected and it is
+ * not possible to undo any of the actions taken beyond that point.
+ ******************************************************************************/
+void psci_cpu_suspend_start(entry_point_info_t *ep,
+			    unsigned int end_pwrlvl,
+			    psci_power_state_t *state_info,
+			    unsigned int is_power_down_state)
+{
+	int skip_wfi = 0;
+	unsigned int idx = plat_my_core_pos();
+
+	/*
+	 * This function must only be called on platforms where the
+	 * CPU_SUSPEND platform hooks have been implemented.
+	 */
+	assert(psci_plat_pm_ops->pwr_domain_suspend &&
+			psci_plat_pm_ops->pwr_domain_suspend_finish);
+
+	/*
+	 * This function acquires the lock corresponding to each power
+	 * level so that by the time all locks are taken, the system topology
+	 * is snapshot and state management can be done safely.
+	 */
+	psci_acquire_pwr_domain_locks(end_pwrlvl,
+				      idx);
+
+	/*
+	 * We check if there are any pending interrupts after the delay
+	 * introduced by lock contention to increase the chances of early
+	 * detection that a wake-up interrupt has fired.
+	 */
+	if (read_isr_el1()) {
+		skip_wfi = 1;
+		goto exit;
+	}
+
+	/*
+	 * This function is passed the requested state info and
+	 * it returns the negotiated state info for each power level upto
+	 * the end level specified.
+	 */
+	psci_do_state_coordination(end_pwrlvl, state_info);
+
+#if ENABLE_PSCI_STAT
+	/* Update the last cpu for each level till end_pwrlvl */
+	psci_stats_update_pwr_down(end_pwrlvl, state_info);
+#endif
+
+	if (is_power_down_state)
+		psci_suspend_to_pwrdown_start(end_pwrlvl, ep, state_info);
+
+	/*
+	 * Plat. management: Allow the platform to perform the
+	 * necessary actions to turn off this cpu e.g. set the
+	 * platform defined mailbox with the psci entrypoint,
+	 * program the power controller etc.
+	 */
+	psci_plat_pm_ops->pwr_domain_suspend(state_info);
+
+#if ENABLE_PSCI_STAT
+	/*
+	 * Capture time-stamp while entering low power state.
+	 * No cache maintenance needed because caches are off
+	 * and writes are direct to main memory.
+	 */
+	PMF_CAPTURE_TIMESTAMP(psci_svc, PSCI_STAT_ID_ENTER_LOW_PWR,
+		PMF_NO_CACHE_MAINT);
+#endif
+
+exit:
+	/*
+	 * Release the locks corresponding to each power level in the
+	 * reverse order to which they were acquired.
+	 */
+	psci_release_pwr_domain_locks(end_pwrlvl,
+				  idx);
+	if (skip_wfi)
+		return;
+
+	if (is_power_down_state) {
+		/* The function calls below must not return */
+		if (psci_plat_pm_ops->pwr_domain_pwr_down_wfi)
+			psci_plat_pm_ops->pwr_domain_pwr_down_wfi(state_info);
+		else
+			psci_power_down_wfi();
+	}
+
+	/*
+	 * We will reach here if only retention/standby states have been
+	 * requested at multiple power levels. This means that the cpu
+	 * context will be preserved.
+	 */
+	wfi();
+
+	/*
+	 * After we wake up from context retaining suspend, call the
+	 * context retaining suspend finisher.
+	 */
+	psci_suspend_to_standby_finisher(idx, state_info, end_pwrlvl);
+}
+
+/*******************************************************************************
+ * The following functions finish an earlier suspend request. They
+ * are called by the common finisher routine in psci_common.c. The `state_info`
+ * is the psci_power_state from which this CPU has woken up from.
+ ******************************************************************************/
+void psci_cpu_suspend_finish(unsigned int cpu_idx,
+			     psci_power_state_t *state_info)
+{
+	unsigned int counter_freq;
+	unsigned int max_off_lvl;
+
+	/* Ensure we have been woken up from a suspended state */
+	assert(psci_get_aff_info_state() == AFF_STATE_ON && is_local_state_off(\
+			state_info->pwr_domain_state[PSCI_CPU_PWR_LVL]));
+
+	/*
+	 * Plat. management: Perform the platform specific actions
+	 * before we change the state of the cpu e.g. enabling the
+	 * gic or zeroing the mailbox register. If anything goes
+	 * wrong then assert as there is no way to recover from this
+	 * situation.
+	 */
+	psci_plat_pm_ops->pwr_domain_suspend_finish(state_info);
+
+	/*
+	 * Arch. management: Enable the data cache, manage stack memory and
+	 * restore the stashed EL3 architectural context from the 'cpu_context'
+	 * structure for this cpu.
+	 */
+	psci_do_pwrup_cache_maintenance();
+
+	/* Re-init the cntfrq_el0 register */
+	counter_freq = plat_get_syscnt_freq2();
+	write_cntfrq_el0(counter_freq);
+
+	/*
+	 * Call the cpu suspend finish handler registered by the Secure Payload
+	 * Dispatcher to let it do any bookeeping. If the handler encounters an
+	 * error, it's expected to assert within
+	 */
+	if (psci_spd_pm && psci_spd_pm->svc_suspend) {
+		max_off_lvl = psci_find_max_off_lvl(state_info);
+		assert (max_off_lvl != PSCI_INVALID_PWR_LVL);
+		psci_spd_pm->svc_suspend_finish(max_off_lvl);
+	}
+
+	/* Invalidate the suspend level for the cpu */
+	psci_set_suspend_pwrlvl(PSCI_INVALID_PWR_LVL);
+
+	/*
+	 * Generic management: Now we just need to retrieve the
+	 * information that we had stashed away during the suspend
+	 * call to set this cpu on its way.
+	 */
+	cm_prepare_el3_exit(NON_SECURE);
+}