diff --git a/lib/el3_runtime/aarch64/context.S b/lib/el3_runtime/aarch64/context.S
new file mode 100644
index 0000000..7982e50
--- /dev/null
+++ b/lib/el3_runtime/aarch64/context.S
@@ -0,0 +1,405 @@
+/*
+ * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <context.h>
+
+	.global	el1_sysregs_context_save
+	.global	el1_sysregs_context_restore
+#if CTX_INCLUDE_FPREGS
+	.global	fpregs_context_save
+	.global	fpregs_context_restore
+#endif
+	.global	save_gp_registers
+	.global	restore_gp_registers_eret
+	.global	restore_gp_registers_callee_eret
+	.global	el3_exit
+
+/* -----------------------------------------------------
+ * The following function strictly follows the AArch64
+ * PCS to use x9-x17 (temporary caller-saved registers)
+ * to save EL1 system register context. It assumes that
+ * 'x0' is pointing to a 'el1_sys_regs' structure where
+ * the register context will be saved.
+ * -----------------------------------------------------
+ */
+func el1_sysregs_context_save
+
+	mrs	x9, spsr_el1
+	mrs	x10, elr_el1
+	stp	x9, x10, [x0, #CTX_SPSR_EL1]
+
+	mrs	x15, sctlr_el1
+	mrs	x16, actlr_el1
+	stp	x15, x16, [x0, #CTX_SCTLR_EL1]
+
+	mrs	x17, cpacr_el1
+	mrs	x9, csselr_el1
+	stp	x17, x9, [x0, #CTX_CPACR_EL1]
+
+	mrs	x10, sp_el1
+	mrs	x11, esr_el1
+	stp	x10, x11, [x0, #CTX_SP_EL1]
+
+	mrs	x12, ttbr0_el1
+	mrs	x13, ttbr1_el1
+	stp	x12, x13, [x0, #CTX_TTBR0_EL1]
+
+	mrs	x14, mair_el1
+	mrs	x15, amair_el1
+	stp	x14, x15, [x0, #CTX_MAIR_EL1]
+
+	mrs	x16, tcr_el1
+	mrs	x17, tpidr_el1
+	stp	x16, x17, [x0, #CTX_TCR_EL1]
+
+	mrs	x9, tpidr_el0
+	mrs	x10, tpidrro_el0
+	stp	x9, x10, [x0, #CTX_TPIDR_EL0]
+
+	mrs	x13, par_el1
+	mrs	x14, far_el1
+	stp	x13, x14, [x0, #CTX_PAR_EL1]
+
+	mrs	x15, afsr0_el1
+	mrs	x16, afsr1_el1
+	stp	x15, x16, [x0, #CTX_AFSR0_EL1]
+
+	mrs	x17, contextidr_el1
+	mrs	x9, vbar_el1
+	stp	x17, x9, [x0, #CTX_CONTEXTIDR_EL1]
+
+	/* Save AArch32 system registers if the build has instructed so */
+#if CTX_INCLUDE_AARCH32_REGS
+	mrs	x11, spsr_abt
+	mrs	x12, spsr_und
+	stp	x11, x12, [x0, #CTX_SPSR_ABT]
+
+	mrs	x13, spsr_irq
+	mrs	x14, spsr_fiq
+	stp	x13, x14, [x0, #CTX_SPSR_IRQ]
+
+	mrs	x15, dacr32_el2
+	mrs	x16, ifsr32_el2
+	stp	x15, x16, [x0, #CTX_DACR32_EL2]
+
+	mrs	x17, fpexc32_el2
+	str	x17, [x0, #CTX_FP_FPEXC32_EL2]
+#endif
+
+	/* Save NS timer registers if the build has instructed so */
+#if NS_TIMER_SWITCH
+	mrs	x10, cntp_ctl_el0
+	mrs	x11, cntp_cval_el0
+	stp	x10, x11, [x0, #CTX_CNTP_CTL_EL0]
+
+	mrs	x12, cntv_ctl_el0
+	mrs	x13, cntv_cval_el0
+	stp	x12, x13, [x0, #CTX_CNTV_CTL_EL0]
+
+	mrs	x14, cntkctl_el1
+	str	x14, [x0, #CTX_CNTKCTL_EL1]
+#endif
+
+	ret
+endfunc el1_sysregs_context_save
+
+/* -----------------------------------------------------
+ * The following function strictly follows the AArch64
+ * PCS to use x9-x17 (temporary caller-saved registers)
+ * to restore EL1 system register context.  It assumes
+ * that 'x0' is pointing to a 'el1_sys_regs' structure
+ * from where the register context will be restored
+ * -----------------------------------------------------
+ */
+func el1_sysregs_context_restore
+
+	ldp	x9, x10, [x0, #CTX_SPSR_EL1]
+	msr	spsr_el1, x9
+	msr	elr_el1, x10
+
+	ldp	x15, x16, [x0, #CTX_SCTLR_EL1]
+	msr	sctlr_el1, x15
+	msr	actlr_el1, x16
+
+	ldp	x17, x9, [x0, #CTX_CPACR_EL1]
+	msr	cpacr_el1, x17
+	msr	csselr_el1, x9
+
+	ldp	x10, x11, [x0, #CTX_SP_EL1]
+	msr	sp_el1, x10
+	msr	esr_el1, x11
+
+	ldp	x12, x13, [x0, #CTX_TTBR0_EL1]
+	msr	ttbr0_el1, x12
+	msr	ttbr1_el1, x13
+
+	ldp	x14, x15, [x0, #CTX_MAIR_EL1]
+	msr	mair_el1, x14
+	msr	amair_el1, x15
+
+	ldp	x16, x17, [x0, #CTX_TCR_EL1]
+	msr	tcr_el1, x16
+	msr	tpidr_el1, x17
+
+	ldp	x9, x10, [x0, #CTX_TPIDR_EL0]
+	msr	tpidr_el0, x9
+	msr	tpidrro_el0, x10
+
+	ldp	x13, x14, [x0, #CTX_PAR_EL1]
+	msr	par_el1, x13
+	msr	far_el1, x14
+
+	ldp	x15, x16, [x0, #CTX_AFSR0_EL1]
+	msr	afsr0_el1, x15
+	msr	afsr1_el1, x16
+
+	ldp	x17, x9, [x0, #CTX_CONTEXTIDR_EL1]
+	msr	contextidr_el1, x17
+	msr	vbar_el1, x9
+
+	/* Restore AArch32 system registers if the build has instructed so */
+#if CTX_INCLUDE_AARCH32_REGS
+	ldp	x11, x12, [x0, #CTX_SPSR_ABT]
+	msr	spsr_abt, x11
+	msr	spsr_und, x12
+
+	ldp	x13, x14, [x0, #CTX_SPSR_IRQ]
+	msr	spsr_irq, x13
+	msr	spsr_fiq, x14
+
+	ldp	x15, x16, [x0, #CTX_DACR32_EL2]
+	msr	dacr32_el2, x15
+	msr	ifsr32_el2, x16
+
+	ldr	x17, [x0, #CTX_FP_FPEXC32_EL2]
+	msr	fpexc32_el2, x17
+#endif
+	/* Restore NS timer registers if the build has instructed so */
+#if NS_TIMER_SWITCH
+	ldp	x10, x11, [x0, #CTX_CNTP_CTL_EL0]
+	msr	cntp_ctl_el0, x10
+	msr	cntp_cval_el0, x11
+
+	ldp	x12, x13, [x0, #CTX_CNTV_CTL_EL0]
+	msr	cntv_ctl_el0, x12
+	msr	cntv_cval_el0, x13
+
+	ldr	x14, [x0, #CTX_CNTKCTL_EL1]
+	msr	cntkctl_el1, x14
+#endif
+
+	/* No explict ISB required here as ERET covers it */
+	ret
+endfunc el1_sysregs_context_restore
+
+/* -----------------------------------------------------
+ * The following function follows the aapcs_64 strictly
+ * to use x9-x17 (temporary caller-saved registers
+ * according to AArch64 PCS) to save floating point
+ * register context. It assumes that 'x0' is pointing to
+ * a 'fp_regs' structure where the register context will
+ * be saved.
+ *
+ * Access to VFP registers will trap if CPTR_EL3.TFP is
+ * set.  However currently we don't use VFP registers
+ * nor set traps in Trusted Firmware, and assume it's
+ * cleared
+ *
+ * TODO: Revisit when VFP is used in secure world
+ * -----------------------------------------------------
+ */
+#if CTX_INCLUDE_FPREGS
+func fpregs_context_save
+	stp	q0, q1, [x0, #CTX_FP_Q0]
+	stp	q2, q3, [x0, #CTX_FP_Q2]
+	stp	q4, q5, [x0, #CTX_FP_Q4]
+	stp	q6, q7, [x0, #CTX_FP_Q6]
+	stp	q8, q9, [x0, #CTX_FP_Q8]
+	stp	q10, q11, [x0, #CTX_FP_Q10]
+	stp	q12, q13, [x0, #CTX_FP_Q12]
+	stp	q14, q15, [x0, #CTX_FP_Q14]
+	stp	q16, q17, [x0, #CTX_FP_Q16]
+	stp	q18, q19, [x0, #CTX_FP_Q18]
+	stp	q20, q21, [x0, #CTX_FP_Q20]
+	stp	q22, q23, [x0, #CTX_FP_Q22]
+	stp	q24, q25, [x0, #CTX_FP_Q24]
+	stp	q26, q27, [x0, #CTX_FP_Q26]
+	stp	q28, q29, [x0, #CTX_FP_Q28]
+	stp	q30, q31, [x0, #CTX_FP_Q30]
+
+	mrs	x9, fpsr
+	str	x9, [x0, #CTX_FP_FPSR]
+
+	mrs	x10, fpcr
+	str	x10, [x0, #CTX_FP_FPCR]
+
+	ret
+endfunc fpregs_context_save
+
+/* -----------------------------------------------------
+ * The following function follows the aapcs_64 strictly
+ * to use x9-x17 (temporary caller-saved registers
+ * according to AArch64 PCS) to restore floating point
+ * register context. It assumes that 'x0' is pointing to
+ * a 'fp_regs' structure from where the register context
+ * will be restored.
+ *
+ * Access to VFP registers will trap if CPTR_EL3.TFP is
+ * set.  However currently we don't use VFP registers
+ * nor set traps in Trusted Firmware, and assume it's
+ * cleared
+ *
+ * TODO: Revisit when VFP is used in secure world
+ * -----------------------------------------------------
+ */
+func fpregs_context_restore
+	ldp	q0, q1, [x0, #CTX_FP_Q0]
+	ldp	q2, q3, [x0, #CTX_FP_Q2]
+	ldp	q4, q5, [x0, #CTX_FP_Q4]
+	ldp	q6, q7, [x0, #CTX_FP_Q6]
+	ldp	q8, q9, [x0, #CTX_FP_Q8]
+	ldp	q10, q11, [x0, #CTX_FP_Q10]
+	ldp	q12, q13, [x0, #CTX_FP_Q12]
+	ldp	q14, q15, [x0, #CTX_FP_Q14]
+	ldp	q16, q17, [x0, #CTX_FP_Q16]
+	ldp	q18, q19, [x0, #CTX_FP_Q18]
+	ldp	q20, q21, [x0, #CTX_FP_Q20]
+	ldp	q22, q23, [x0, #CTX_FP_Q22]
+	ldp	q24, q25, [x0, #CTX_FP_Q24]
+	ldp	q26, q27, [x0, #CTX_FP_Q26]
+	ldp	q28, q29, [x0, #CTX_FP_Q28]
+	ldp	q30, q31, [x0, #CTX_FP_Q30]
+
+	ldr	x9, [x0, #CTX_FP_FPSR]
+	msr	fpsr, x9
+
+	ldr	x10, [x0, #CTX_FP_FPCR]
+	msr	fpcr, x10
+
+	/*
+	 * No explict ISB required here as ERET to
+	 * switch to secure EL1 or non-secure world
+	 * covers it
+	 */
+
+	ret
+endfunc fpregs_context_restore
+#endif /* CTX_INCLUDE_FPREGS */
+
+/* -----------------------------------------------------
+ * The following functions are used to save and restore
+ * all the general purpose registers. Ideally we would
+ * only save and restore the callee saved registers when
+ * a world switch occurs but that type of implementation
+ * is more complex. So currently we will always save and
+ * restore these registers on entry and exit of EL3.
+ * These are not macros to ensure their invocation fits
+ * within the 32 instructions per exception vector.
+ * clobbers: x18
+ * -----------------------------------------------------
+ */
+func save_gp_registers
+	stp	x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0]
+	stp	x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2]
+	stp	x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4]
+	stp	x6, x7, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X6]
+	stp	x8, x9, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X8]
+	stp	x10, x11, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X10]
+	stp	x12, x13, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X12]
+	stp	x14, x15, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X14]
+	stp	x16, x17, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X16]
+	stp	x18, x19, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X18]
+	stp	x20, x21, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X20]
+	stp	x22, x23, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X22]
+	stp	x24, x25, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X24]
+	stp	x26, x27, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X26]
+	stp	x28, x29, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X28]
+	mrs	x18, sp_el0
+	str	x18, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_SP_EL0]
+	ret
+endfunc save_gp_registers
+
+func restore_gp_registers_eret
+	ldp	x0, x1, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X0]
+	ldp	x2, x3, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X2]
+	b	restore_gp_registers_callee_eret
+endfunc restore_gp_registers_eret
+
+func restore_gp_registers_callee_eret
+	ldp	x4, x5, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X4]
+	ldp	x6, x7, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X6]
+	ldp	x8, x9, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X8]
+	ldp	x10, x11, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X10]
+	ldp	x12, x13, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X12]
+	ldp	x14, x15, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X14]
+	ldp	x18, x19, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X18]
+	ldp	x20, x21, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X20]
+	ldp	x22, x23, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X22]
+	ldp	x24, x25, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X24]
+	ldp	x26, x27, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X26]
+	ldp	x28, x29, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X28]
+	ldp	 x30, x17, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_LR]
+	msr	sp_el0, x17
+	ldp	x16, x17, [sp, #CTX_GPREGS_OFFSET + CTX_GPREG_X16]
+	eret
+endfunc	restore_gp_registers_callee_eret
+
+	/* -----------------------------------------------------
+	 * This routine assumes that the SP_EL3 is pointing to
+	 * a valid context structure from where the gp regs and
+	 * other special registers can be retrieved.
+	 * -----------------------------------------------------
+	 */
+func el3_exit
+	/* -----------------------------------------------------
+	 * Save the current SP_EL0 i.e. the EL3 runtime stack
+	 * which will be used for handling the next SMC. Then
+	 * switch to SP_EL3
+	 * -----------------------------------------------------
+	 */
+	mov	x17, sp
+	msr	spsel, #1
+	str	x17, [sp, #CTX_EL3STATE_OFFSET + CTX_RUNTIME_SP]
+
+	/* -----------------------------------------------------
+	 * Restore SPSR_EL3, ELR_EL3 and SCR_EL3 prior to ERET
+	 * -----------------------------------------------------
+	 */
+	ldr	x18, [sp, #CTX_EL3STATE_OFFSET + CTX_SCR_EL3]
+	ldp	x16, x17, [sp, #CTX_EL3STATE_OFFSET + CTX_SPSR_EL3]
+	msr	scr_el3, x18
+	msr	spsr_el3, x16
+	msr	elr_el3, x17
+
+	/* Restore saved general purpose registers and return */
+	b	restore_gp_registers_eret
+endfunc el3_exit
diff --git a/lib/el3_runtime/aarch64/context_mgmt.c b/lib/el3_runtime/aarch64/context_mgmt.c
new file mode 100644
index 0000000..4527aa3
--- /dev/null
+++ b/lib/el3_runtime/aarch64/context_mgmt.c
@@ -0,0 +1,383 @@
+/*
+ * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <context.h>
+#include <context_mgmt.h>
+#include <interrupt_mgmt.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <smcc_helpers.h>
+#include <string.h>
+
+
+/*******************************************************************************
+ * Context management library initialisation routine. This library is used by
+ * runtime services to share pointers to 'cpu_context' structures for the secure
+ * and non-secure states. Management of the structures and their associated
+ * memory is not done by the context management library e.g. the PSCI service
+ * manages the cpu context used for entry from and exit to the non-secure state.
+ * The Secure payload dispatcher service manages the context(s) corresponding to
+ * the secure state. It also uses this library to get access to the non-secure
+ * state cpu context pointers.
+ * Lastly, this library provides the api to make SP_EL3 point to the cpu context
+ * which will used for programming an entry into a lower EL. The same context
+ * will used to save state upon exception entry from that EL.
+ ******************************************************************************/
+void cm_init(void)
+{
+	/*
+	 * The context management library has only global data to intialize, but
+	 * that will be done when the BSS is zeroed out
+	 */
+}
+
+/*******************************************************************************
+ * The following function initializes the cpu_context 'ctx' for
+ * first use, and sets the initial entrypoint state as specified by the
+ * entry_point_info structure.
+ *
+ * The security state to initialize is determined by the SECURE attribute
+ * of the entry_point_info. The function returns a pointer to the initialized
+ * context and sets this as the next context to return to.
+ *
+ * The EE and ST attributes are used to configure the endianess and secure
+ * timer availability for the new execution context.
+ *
+ * To prepare the register state for entry call cm_prepare_el3_exit() and
+ * el3_exit(). For Secure-EL1 cm_prepare_el3_exit() is equivalent to
+ * cm_e1_sysreg_context_restore().
+ ******************************************************************************/
+static void cm_init_context_common(cpu_context_t *ctx, const entry_point_info_t *ep)
+{
+	unsigned int security_state;
+	uint32_t scr_el3;
+	el3_state_t *state;
+	gp_regs_t *gp_regs;
+	unsigned long sctlr_elx;
+
+	assert(ctx);
+
+	security_state = GET_SECURITY_STATE(ep->h.attr);
+
+	/* Clear any residual register values from the context */
+	memset(ctx, 0, sizeof(*ctx));
+
+	/*
+	 * Base the context SCR on the current value, adjust for entry point
+	 * specific requirements and set trap bits from the IMF
+	 * TODO: provide the base/global SCR bits using another mechanism?
+	 */
+	scr_el3 = read_scr();
+	scr_el3 &= ~(SCR_NS_BIT | SCR_RW_BIT | SCR_FIQ_BIT | SCR_IRQ_BIT |
+			SCR_ST_BIT | SCR_HCE_BIT);
+
+	if (security_state != SECURE)
+		scr_el3 |= SCR_NS_BIT;
+
+	if (GET_RW(ep->spsr) == MODE_RW_64)
+		scr_el3 |= SCR_RW_BIT;
+
+	if (EP_GET_ST(ep->h.attr))
+		scr_el3 |= SCR_ST_BIT;
+
+#ifndef HANDLE_EA_EL3_FIRST
+	/* Explicitly stop to trap aborts from lower exception levels. */
+	scr_el3 &= ~SCR_EA_BIT;
+#endif
+
+#if IMAGE_BL31
+	/*
+	 * IRQ/FIQ bits only need setting if interrupt routing
+	 * model has been set up for BL31.
+	 */
+	scr_el3 |= get_scr_el3_from_routing_model(security_state);
+#endif
+
+	/*
+	 * Set up SCTLR_ELx for the target exception level:
+	 * EE bit is taken from the entrypoint attributes
+	 * M, C and I bits must be zero (as required by PSCI specification)
+	 *
+	 * The target exception level is based on the spsr mode requested.
+	 * If execution is requested to EL2 or hyp mode, HVC is enabled
+	 * via SCR_EL3.HCE.
+	 *
+	 * Always compute the SCTLR_EL1 value and save in the cpu_context
+	 * - the EL2 registers are set up by cm_preapre_ns_entry() as they
+	 * are not part of the stored cpu_context
+	 *
+	 * TODO: In debug builds the spsr should be validated and checked
+	 * against the CPU support, security state, endianess and pc
+	 */
+	sctlr_elx = EP_GET_EE(ep->h.attr) ? SCTLR_EE_BIT : 0;
+	if (GET_RW(ep->spsr) == MODE_RW_64)
+		sctlr_elx |= SCTLR_EL1_RES1;
+	else
+		sctlr_elx |= SCTLR_AARCH32_EL1_RES1;
+	write_ctx_reg(get_sysregs_ctx(ctx), CTX_SCTLR_EL1, sctlr_elx);
+
+	if ((GET_RW(ep->spsr) == MODE_RW_64
+	     && GET_EL(ep->spsr) == MODE_EL2)
+	    || (GET_RW(ep->spsr) != MODE_RW_64
+		&& GET_M32(ep->spsr) == MODE32_hyp)) {
+		scr_el3 |= SCR_HCE_BIT;
+	}
+
+	/* Populate EL3 state so that we've the right context before doing ERET */
+	state = get_el3state_ctx(ctx);
+	write_ctx_reg(state, CTX_SCR_EL3, scr_el3);
+	write_ctx_reg(state, CTX_ELR_EL3, ep->pc);
+	write_ctx_reg(state, CTX_SPSR_EL3, ep->spsr);
+
+	/*
+	 * Store the X0-X7 value from the entrypoint into the context
+	 * Use memcpy as we are in control of the layout of the structures
+	 */
+	gp_regs = get_gpregs_ctx(ctx);
+	memcpy(gp_regs, (void *)&ep->args, sizeof(aapcs64_params_t));
+}
+
+/*******************************************************************************
+ * The following function initializes the cpu_context for a CPU specified by
+ * its `cpu_idx` for first use, and sets the initial entrypoint state as
+ * specified by the entry_point_info structure.
+ ******************************************************************************/
+void cm_init_context_by_index(unsigned int cpu_idx,
+			      const entry_point_info_t *ep)
+{
+	cpu_context_t *ctx;
+	ctx = cm_get_context_by_index(cpu_idx, GET_SECURITY_STATE(ep->h.attr));
+	cm_init_context_common(ctx, ep);
+}
+
+/*******************************************************************************
+ * The following function initializes the cpu_context for the current CPU
+ * for first use, and sets the initial entrypoint state as specified by the
+ * entry_point_info structure.
+ ******************************************************************************/
+void cm_init_my_context(const entry_point_info_t *ep)
+{
+	cpu_context_t *ctx;
+	ctx = cm_get_context(GET_SECURITY_STATE(ep->h.attr));
+	cm_init_context_common(ctx, ep);
+}
+
+/*******************************************************************************
+ * Prepare the CPU system registers for first entry into secure or normal world
+ *
+ * If execution is requested to EL2 or hyp mode, SCTLR_EL2 is initialized
+ * If execution is requested to non-secure EL1 or svc mode, and the CPU supports
+ * EL2 then EL2 is disabled by configuring all necessary EL2 registers.
+ * For all entries, the EL1 registers are initialized from the cpu_context
+ ******************************************************************************/
+void cm_prepare_el3_exit(uint32_t security_state)
+{
+	uint32_t sctlr_elx, scr_el3, cptr_el2;
+	cpu_context_t *ctx = cm_get_context(security_state);
+
+	assert(ctx);
+
+	if (security_state == NON_SECURE) {
+		scr_el3 = read_ctx_reg(get_el3state_ctx(ctx), CTX_SCR_EL3);
+		if (scr_el3 & SCR_HCE_BIT) {
+			/* Use SCTLR_EL1.EE value to initialise sctlr_el2 */
+			sctlr_elx = read_ctx_reg(get_sysregs_ctx(ctx),
+						 CTX_SCTLR_EL1);
+			sctlr_elx &= ~SCTLR_EE_BIT;
+			sctlr_elx |= SCTLR_EL2_RES1;
+			write_sctlr_el2(sctlr_elx);
+		} else if (read_id_aa64pfr0_el1() &
+			   (ID_AA64PFR0_ELX_MASK << ID_AA64PFR0_EL2_SHIFT)) {
+			/* EL2 present but unused, need to disable safely */
+
+			/* HCR_EL2 = 0, except RW bit set to match SCR_EL3 */
+			write_hcr_el2((scr_el3 & SCR_RW_BIT) ? HCR_RW_BIT : 0);
+
+			/* SCTLR_EL2 : can be ignored when bypassing */
+
+			/* CPTR_EL2 : disable all traps TCPAC, TTA, TFP */
+			cptr_el2 = read_cptr_el2();
+			cptr_el2 &= ~(TCPAC_BIT | TTA_BIT | TFP_BIT);
+			write_cptr_el2(cptr_el2);
+
+			/* Enable EL1 access to timer */
+			write_cnthctl_el2(EL1PCEN_BIT | EL1PCTEN_BIT);
+
+			/* Reset CNTVOFF_EL2 */
+			write_cntvoff_el2(0);
+
+			/* Set VPIDR, VMPIDR to match MIDR, MPIDR */
+			write_vpidr_el2(read_midr_el1());
+			write_vmpidr_el2(read_mpidr_el1());
+
+			/*
+			 * Reset VTTBR_EL2.
+			 * Needed because cache maintenance operations depend on
+			 * the VMID even when non-secure EL1&0 stage 2 address
+			 * translation are disabled.
+			 */
+			write_vttbr_el2(0);
+		}
+	}
+
+	el1_sysregs_context_restore(get_sysregs_ctx(ctx));
+
+	cm_set_next_context(ctx);
+}
+
+/*******************************************************************************
+ * The next four functions are used by runtime services to save and restore
+ * EL1 context on the 'cpu_context' structure for the specified security
+ * state.
+ ******************************************************************************/
+void cm_el1_sysregs_context_save(uint32_t security_state)
+{
+	cpu_context_t *ctx;
+
+	ctx = cm_get_context(security_state);
+	assert(ctx);
+
+	el1_sysregs_context_save(get_sysregs_ctx(ctx));
+}
+
+void cm_el1_sysregs_context_restore(uint32_t security_state)
+{
+	cpu_context_t *ctx;
+
+	ctx = cm_get_context(security_state);
+	assert(ctx);
+
+	el1_sysregs_context_restore(get_sysregs_ctx(ctx));
+}
+
+/*******************************************************************************
+ * This function populates ELR_EL3 member of 'cpu_context' pertaining to the
+ * given security state with the given entrypoint
+ ******************************************************************************/
+void cm_set_elr_el3(uint32_t security_state, uintptr_t entrypoint)
+{
+	cpu_context_t *ctx;
+	el3_state_t *state;
+
+	ctx = cm_get_context(security_state);
+	assert(ctx);
+
+	/* Populate EL3 state so that ERET jumps to the correct entry */
+	state = get_el3state_ctx(ctx);
+	write_ctx_reg(state, CTX_ELR_EL3, entrypoint);
+}
+
+/*******************************************************************************
+ * This function populates ELR_EL3 and SPSR_EL3 members of 'cpu_context'
+ * pertaining to the given security state
+ ******************************************************************************/
+void cm_set_elr_spsr_el3(uint32_t security_state,
+			uintptr_t entrypoint, uint32_t spsr)
+{
+	cpu_context_t *ctx;
+	el3_state_t *state;
+
+	ctx = cm_get_context(security_state);
+	assert(ctx);
+
+	/* Populate EL3 state so that ERET jumps to the correct entry */
+	state = get_el3state_ctx(ctx);
+	write_ctx_reg(state, CTX_ELR_EL3, entrypoint);
+	write_ctx_reg(state, CTX_SPSR_EL3, spsr);
+}
+
+/*******************************************************************************
+ * This function updates a single bit in the SCR_EL3 member of the 'cpu_context'
+ * pertaining to the given security state using the value and bit position
+ * specified in the parameters. It preserves all other bits.
+ ******************************************************************************/
+void cm_write_scr_el3_bit(uint32_t security_state,
+			  uint32_t bit_pos,
+			  uint32_t value)
+{
+	cpu_context_t *ctx;
+	el3_state_t *state;
+	uint32_t scr_el3;
+
+	ctx = cm_get_context(security_state);
+	assert(ctx);
+
+	/* Ensure that the bit position is a valid one */
+	assert((1 << bit_pos) & SCR_VALID_BIT_MASK);
+
+	/* Ensure that the 'value' is only a bit wide */
+	assert(value <= 1);
+
+	/*
+	 * Get the SCR_EL3 value from the cpu context, clear the desired bit
+	 * and set it to its new value.
+	 */
+	state = get_el3state_ctx(ctx);
+	scr_el3 = read_ctx_reg(state, CTX_SCR_EL3);
+	scr_el3 &= ~(1 << bit_pos);
+	scr_el3 |= value << bit_pos;
+	write_ctx_reg(state, CTX_SCR_EL3, scr_el3);
+}
+
+/*******************************************************************************
+ * This function retrieves SCR_EL3 member of 'cpu_context' pertaining to the
+ * given security state.
+ ******************************************************************************/
+uint32_t cm_get_scr_el3(uint32_t security_state)
+{
+	cpu_context_t *ctx;
+	el3_state_t *state;
+
+	ctx = cm_get_context(security_state);
+	assert(ctx);
+
+	/* Populate EL3 state so that ERET jumps to the correct entry */
+	state = get_el3state_ctx(ctx);
+	return read_ctx_reg(state, CTX_SCR_EL3);
+}
+
+/*******************************************************************************
+ * This function is used to program the context that's used for exception
+ * return. This initializes the SP_EL3 to a pointer to a 'cpu_context' set for
+ * the required security state
+ ******************************************************************************/
+void cm_set_next_eret_context(uint32_t security_state)
+{
+	cpu_context_t *ctx;
+
+	ctx = cm_get_context(security_state);
+	assert(ctx);
+
+	cm_set_next_context(ctx);
+}
diff --git a/lib/el3_runtime/aarch64/cpu_data.S b/lib/el3_runtime/aarch64/cpu_data.S
new file mode 100644
index 0000000..2cc07ba
--- /dev/null
+++ b/lib/el3_runtime/aarch64/cpu_data.S
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2014-2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <asm_macros.S>
+#include <cpu_data.h>
+
+.globl	init_cpu_data_ptr
+.globl	_cpu_data_by_index
+
+/* -----------------------------------------------------------------
+ * void init_cpu_data_ptr(void)
+ *
+ * Initialise the TPIDR_EL3 register to refer to the cpu_data_t
+ * for the calling CPU. This must be called before cm_get_cpu_data()
+ *
+ * This can be called without a valid stack. It assumes that
+ * plat_my_core_pos() does not clobber register x10.
+ * clobbers: x0, x1, x10
+ * -----------------------------------------------------------------
+ */
+func init_cpu_data_ptr
+	mov	x10, x30
+	bl	plat_my_core_pos
+	bl	_cpu_data_by_index
+	msr	tpidr_el3, x0
+	ret	x10
+endfunc init_cpu_data_ptr
+
+/* -----------------------------------------------------------------
+ * cpu_data_t *_cpu_data_by_index(uint32_t cpu_index)
+ *
+ * Return the cpu_data structure for the CPU with given linear index
+ *
+ * This can be called without a valid stack.
+ * clobbers: x0, x1
+ * -----------------------------------------------------------------
+ */
+func _cpu_data_by_index
+	adr	x1, percpu_data
+	add	x0, x1, x0, LSL #CPU_DATA_LOG2SIZE
+	ret
+endfunc _cpu_data_by_index
diff --git a/lib/el3_runtime/cpu_data_array.c b/lib/el3_runtime/cpu_data_array.c
new file mode 100644
index 0000000..eba21a5
--- /dev/null
+++ b/lib/el3_runtime/cpu_data_array.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2014-2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <cassert.h>
+#include <cpu_data.h>
+#include <platform_def.h>
+
+/* The per_cpu_ptr_cache_t space allocation */
+cpu_data_t percpu_data[PLATFORM_CORE_COUNT];