plat/arm/sgi: platform definitions for upcoming platforms
Upcoming RD platforms have changes in the SOC address map from that
of the existing platforms. As a prepartory step to add support for the
upcoming platforms, create platform definitions for those platforms.
Change-Id: Ic5df9fed02c44e65ec260bbb5efc1b8dbd919a56
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
diff --git a/plat/arm/css/sgi/include/sgi_soc_css_def_v2.h b/plat/arm/css/sgi/include/sgi_soc_css_def_v2.h
new file mode 100644
index 0000000..03f1073
--- /dev/null
+++ b/plat/arm/css/sgi/include/sgi_soc_css_def_v2.h
@@ -0,0 +1,194 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SGI_SOC_CSS_DEF_V2_H
+#define SGI_SOC_CSS_DEF_V2_H
+
+#include <lib/utils_def.h>
+#include <plat/common/common_def.h>
+
+/*
+ * Definitions common to all ARM CSS SoCs
+ */
+
+/* Following covers ARM CSS SoC Peripherals */
+
+#define SOC_SYSTEM_PERIPH_BASE UL(0x0C000000)
+#define SOC_SYSTEM_PERIPH_SIZE UL(0x02000000)
+
+#define SOC_PLATFORM_PERIPH_BASE UL(0x0E000000)
+#define SOC_PLATFORM_PERIPH_SIZE UL(0x02000000)
+
+#define SOC_CSS_PCIE_CONTROL_BASE UL(0x0ef20000)
+
+/* PL011 UART related constants */
+#define SOC_CSS_UART1_BASE UL(0x0ef80000)
+#define SOC_CSS_UART0_BASE UL(0x0ef70000)
+
+/* Memory controller */
+#define SOC_MEMCNTRL_BASE UL(0x10000000)
+#define SOC_MEMCNTRL_SIZE UL(0x10000000)
+
+#define SOC_CSS_UART0_CLK_IN_HZ UL(7372800)
+#define SOC_CSS_UART1_CLK_IN_HZ UL(7372800)
+
+/* SoC NIC-400 Global Programmers View (GPV) */
+#define SOC_CSS_NIC400_BASE UL(0x0ED00000)
+
+#define SOC_CSS_NIC400_USB_EHCI U(0)
+#define SOC_CSS_NIC400_TLX_MASTER U(1)
+#define SOC_CSS_NIC400_USB_OHCI U(2)
+#define SOC_CSS_NIC400_PL354_SMC U(3)
+/*
+ * The apb4_bridge controls access to:
+ * - the PCIe configuration registers
+ * - the MMU units for USB, HDLCD and DMA
+ */
+#define SOC_CSS_NIC400_APB4_BRIDGE U(4)
+
+/* Non-volatile counters */
+#define SOC_TRUSTED_NVCTR_BASE UL(0x0EE70000)
+#define TFW_NVCTR_BASE (SOC_TRUSTED_NVCTR_BASE + 0x0000)
+#define TFW_NVCTR_SIZE U(4)
+#define NTFW_CTR_BASE (SOC_TRUSTED_NVCTR_BASE + 0x0004)
+#define NTFW_CTR_SIZE U(4)
+
+/* Keys */
+#define SOC_KEYS_BASE UL(0x0EE80000)
+#define TZ_PUB_KEY_HASH_BASE (SOC_KEYS_BASE + 0x0000)
+#define TZ_PUB_KEY_HASH_SIZE U(32)
+#define HU_KEY_BASE (SOC_KEYS_BASE + 0x0020)
+#define HU_KEY_SIZE U(16)
+#define END_KEY_BASE (SOC_KEYS_BASE + 0x0044)
+#define END_KEY_SIZE U(32)
+
+#define SOC_PLATFORM_PERIPH_MAP_DEVICE MAP_REGION_FLAT( \
+ SOC_PLATFORM_PERIPH_BASE, \
+ SOC_PLATFORM_PERIPH_SIZE, \
+ MT_DEVICE | MT_RW | MT_SECURE)
+
+#define SOC_SYSTEM_PERIPH_MAP_DEVICE MAP_REGION_FLAT( \
+ SOC_SYSTEM_PERIPH_BASE, \
+ SOC_SYSTEM_PERIPH_SIZE, \
+ MT_DEVICE | MT_RW | MT_SECURE)
+
+#define SOC_MEMCNTRL_MAP_DEVICE MAP_REGION_FLAT( \
+ SOC_MEMCNTRL_BASE, \
+ SOC_MEMCNTRL_SIZE, \
+ MT_DEVICE | MT_RW | MT_SECURE)
+
+/*
+ * The bootsec_bridge controls access to a bunch of peripherals, e.g. the UARTs.
+ */
+#define SOC_CSS_NIC400_BOOTSEC_BRIDGE U(5)
+#define SOC_CSS_NIC400_BOOTSEC_BRIDGE_UART1 UL(1 << 12)
+
+/*
+ * Required platform porting definitions common to all ARM CSS SoCs
+ */
+/* 2MB used for SCP DDR retraining */
+#define PLAT_ARM_SCP_TZC_DRAM1_SIZE UL(0x00200000)
+
+/* V2M motherboard system registers & offsets */
+#define V2M_SYSREGS_BASE UL(0x0C010000)
+#define V2M_SYS_LED U(0x8)
+
+/*
+ * V2M sysled bit definitions. The values written to this
+ * register are defined in arch.h & runtime_svc.h. Only
+ * used by the primary cpu to diagnose any cold boot issues.
+ *
+ * SYS_LED[0] - Security state (S=0/NS=1)
+ * SYS_LED[2:1] - Exception Level (EL3-EL0)
+ * SYS_LED[7:3] - Exception Class (Sync/Async & origin)
+ *
+ */
+#define V2M_SYS_LED_SS_SHIFT U(0)
+#define V2M_SYS_LED_EL_SHIFT U(1)
+#define V2M_SYS_LED_EC_SHIFT U(3)
+
+#define V2M_SYS_LED_SS_MASK U(0x01)
+#define V2M_SYS_LED_EL_MASK U(0x03)
+#define V2M_SYS_LED_EC_MASK U(0x1f)
+
+/* NOR Flash */
+#define V2M_FLASH0_BASE UL(0x08000000)
+#define V2M_FLASH0_SIZE UL(0x04000000)
+#define V2M_FLASH_BLOCK_SIZE UL(0x00040000) /* 256 KB */
+
+/*
+ * The flash can be mapped either as read-only or read-write.
+ *
+ * If it is read-write then it should also be mapped as device memory because
+ * NOR flash programming involves sending a fixed, ordered sequence of commands.
+ *
+ * If it is read-only then it should also be mapped as:
+ * - Normal memory, because reading from NOR flash is transparent, it is like
+ * reading from RAM.
+ * - Non-executable by default. If some parts of the flash need to be executable
+ * then platform code is responsible for re-mapping the appropriate portion
+ * of it as executable.
+ */
+#define V2M_MAP_FLASH0_RW MAP_REGION_FLAT(V2M_FLASH0_BASE,\
+ V2M_FLASH0_SIZE, \
+ MT_DEVICE | MT_RW | MT_SECURE)
+
+#define V2M_MAP_FLASH0_RO MAP_REGION_FLAT(V2M_FLASH0_BASE,\
+ V2M_FLASH0_SIZE, \
+ MT_RO_DATA | MT_SECURE)
+
+#define SGI_MAP_FLASH0_RO MAP_REGION_FLAT(V2M_FLASH0_BASE,\
+ V2M_FLASH0_SIZE, \
+ MT_DEVICE | MT_RO | MT_SECURE)
+
+/* Platform ID address */
+#define BOARD_CSS_PLAT_ID_REG_ADDR UL(0x0EFE00E0)
+
+/* Platform ID related accessors */
+#define BOARD_CSS_PLAT_ID_REG_ID_MASK U(0x0F)
+#define BOARD_CSS_PLAT_ID_REG_ID_SHIFT U(0x00)
+#define BOARD_CSS_PLAT_ID_REG_VERSION_MASK U(0xF00)
+#define BOARD_CSS_PLAT_ID_REG_VERSION_SHIFT U(0x08)
+#define BOARD_CSS_PLAT_TYPE_RTL U(0x00)
+#define BOARD_CSS_PLAT_TYPE_FPGA U(0x01)
+#define BOARD_CSS_PLAT_TYPE_EMULATOR U(0x02)
+#define BOARD_CSS_PLAT_TYPE_FVP U(0x03)
+
+#ifndef __ASSEMBLER__
+
+#include <lib/mmio.h>
+
+#define BOARD_CSS_GET_PLAT_TYPE(addr) \
+ ((mmio_read_32(addr) & BOARD_CSS_PLAT_ID_REG_ID_MASK) \
+ >> BOARD_CSS_PLAT_ID_REG_ID_SHIFT)
+
+#endif /* __ASSEMBLER__ */
+
+
+#define MAX_IO_DEVICES U(3)
+#define MAX_IO_HANDLES U(4)
+
+/* Reserve the last block of flash for PSCI MEM PROTECT flag */
+#define PLAT_ARM_FIP_BASE V2M_FLASH0_BASE
+#define PLAT_ARM_FIP_MAX_SIZE (V2M_FLASH0_SIZE - V2M_FLASH_BLOCK_SIZE)
+
+#define PLAT_ARM_NVM_BASE V2M_FLASH0_BASE
+#define PLAT_ARM_NVM_SIZE (V2M_FLASH0_SIZE - V2M_FLASH_BLOCK_SIZE)
+
+/* UART related constants */
+#define PLAT_ARM_BOOT_UART_BASE SOC_CSS_UART0_BASE
+#define PLAT_ARM_BOOT_UART_CLK_IN_HZ SOC_CSS_UART0_CLK_IN_HZ
+
+#define PLAT_ARM_RUN_UART_BASE SOC_CSS_UART1_BASE
+#define PLAT_ARM_RUN_UART_CLK_IN_HZ SOC_CSS_UART1_CLK_IN_HZ
+
+#define PLAT_ARM_SP_MIN_RUN_UART_BASE SOC_CSS_UART1_BASE
+#define PLAT_ARM_SP_MIN_RUN_UART_CLK_IN_HZ SOC_CSS_UART1_CLK_IN_HZ
+
+#define PLAT_ARM_CRASH_UART_BASE PLAT_ARM_RUN_UART_BASE
+#define PLAT_ARM_CRASH_UART_CLK_IN_HZ PLAT_ARM_RUN_UART_CLK_IN_HZ
+
+#endif /* SGI_SOC_CSS_DEF_V2_H */
diff --git a/plat/arm/css/sgi/include/sgi_soc_platform_def_v2.h b/plat/arm/css/sgi/include/sgi_soc_platform_def_v2.h
new file mode 100644
index 0000000..cb747c3
--- /dev/null
+++ b/plat/arm/css/sgi/include/sgi_soc_platform_def_v2.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SGI_SOC_PLATFORM_DEF_V2_H
+#define SGI_SOC_PLATFORM_DEF_V2_H
+
+#include <sgi_base_platform_def.h>
+#include <sgi_soc_css_def_v2.h>
+
+#endif /* SGI_SOC_PLATFORM_DEF_V2_H */