feat(stm32mp1): select platform compilation either by flag or DT
To choose either STM32MP13 or STM32MP15, one of the two flags can be
set to 1 in the make command line. Or the platform selection can be
done with device tree name, if it begins with stm32mp13 or stm32mp15.
Change-Id: I72f42665c105b71a84b4952ef3fcd6c06ae4598c
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
diff --git a/plat/st/stm32mp1/platform.mk b/plat/st/stm32mp1/platform.mk
index 60eace8..9e732d6 100644
--- a/plat/st/stm32mp1/platform.mk
+++ b/plat/st/stm32mp1/platform.mk
@@ -24,10 +24,30 @@
# Enable dynamic memory mapping
PLAT_XLAT_TABLES_DYNAMIC := 1
+# Default Device tree
+DTB_FILE_NAME ?= stm32mp157c-ev1.dtb
+
+STM32MP13 ?= 0
+STM32MP15 ?= 0
+
ifeq ($(STM32MP13),1)
+ifeq ($(STM32MP15),1)
+$(error Cannot enable both flags STM32MP13 and STM32MP15)
+endif
STM32MP13 := 1
STM32MP15 := 0
+else ifeq ($(STM32MP15),1)
+STM32MP13 := 0
+STM32MP15 := 1
+else ifneq ($(findstring stm32mp13,$(DTB_FILE_NAME)),)
+STM32MP13 := 1
+STM32MP15 := 0
+else ifneq ($(findstring stm32mp15,$(DTB_FILE_NAME)),)
+STM32MP13 := 0
+STM32MP15 := 1
+endif
+ifeq ($(STM32MP13),1)
# DDR controller with single AXI port and 16-bit interface
STM32MP_DDR_DUAL_AXI_PORT:= 0
STM32MP_DDR_32BIT_INTERFACE:= 0
@@ -35,11 +55,9 @@
# STM32 image header version v2.0
STM32_HEADER_VERSION_MAJOR:= 2
STM32_HEADER_VERSION_MINOR:= 0
-else
-#STM32MP15
-STM32MP13 := 0
-STM32MP15 := 1
+endif
+ifeq ($(STM32MP15),1)
# DDR controller with dual AXI port and 32-bit interface
STM32MP_DDR_DUAL_AXI_PORT:= 1
STM32MP_DDR_32BIT_INTERFACE:= 1
@@ -107,11 +125,9 @@
# Device tree
ifeq ($(STM32MP13),1)
-DTB_FILE_NAME ?= stm32mp135f-dk.dtb
BL2_DTSI := stm32mp13-bl2.dtsi
FDT_SOURCES := $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl2.dts,$(DTB_FILE_NAME)))
else
-DTB_FILE_NAME ?= stm32mp157c-ev1.dtb
ifeq ($(STM32MP_USE_STM32IMAGE),1)
ifeq ($(AARCH32_SP),optee)
BL2_DTSI := stm32mp15-bl2.dtsi