zynqmp: pm: Provide state argument to the pm_self_suspend API call
The state argument of the pm_self_suspend API encodes the state to
which the APU intends to suspend. The state can be:
- PM_APU_STATE_CPU_IDLE - processor power down, all memories remain
on
- PM_APU_STATE_SUSPEND_TO_RAM - all processors powered down, L2$
powered down, all OCM banks in retention and DDR in
self-refresh.
The calls for setting requirements for L2$ and OCM banks are now
redundant and removed.
Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
[ sb
- remove redundant #defines
]
Signed-off-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
diff --git a/plat/xilinx/zynqmp/pm_service/pm_api_sys.c b/plat/xilinx/zynqmp/pm_service/pm_api_sys.c
index eac7801..f78a311 100644
--- a/plat/xilinx/zynqmp/pm_service/pm_api_sys.c
+++ b/plat/xilinx/zynqmp/pm_service/pm_api_sys.c
@@ -76,7 +76,7 @@
* pm_self_suspend() - PM call for processor to suspend itself
* @nid Node id of the processor or subsystem
* @latency Requested maximum wakeup latency (not supported)
- * @state Requested state (not supported)
+ * @state Requested state
* @address Resume address
*
* This is a blocking call, it will return only once PMU has responded.
diff --git a/plat/xilinx/zynqmp/pm_service/pm_client.c b/plat/xilinx/zynqmp/pm_service/pm_client.c
index cf0d5f0..f0b34cb 100644
--- a/plat/xilinx/zynqmp/pm_service/pm_client.c
+++ b/plat/xilinx/zynqmp/pm_service/pm_client.c
@@ -43,16 +43,10 @@
#include "pm_ipi.h"
#include "../zynqmp_def.h"
-#define OCM_BANK_0 0xFFFC0000
-#define OCM_BANK_1 (OCM_BANK_0 + 0x10000)
-#define OCM_BANK_2 (OCM_BANK_1 + 0x10000)
-#define OCM_BANK_3 (OCM_BANK_2 + 0x10000)
-
#define UNDEFINED_CPUID (~0)
+
DEFINE_BAKERY_LOCK(pm_client_secure_lock);
-/* Declaration of linker defined symbol */
-extern unsigned long __BL31_END__;
extern const struct pm_ipi apu_ipi;
/* Order in pm_procs_all array must match cpu ids */
@@ -80,38 +74,6 @@
};
/**
- * set_ocm_retention() - Configure OCM memory banks for retention
- *
- * APU specific requirements for suspend action:
- * OCM has to enter retention state in order to preserve saved
- * context after suspend request. OCM banks are determined by
- * __BL31_END__ linker symbol.
- *
- * Return: Returns status, either success or error+reason
- */
-enum pm_ret_status set_ocm_retention(void)
-{
- enum pm_ret_status ret;
-
- /* OCM_BANK_0 will always be occupied */
- ret = pm_set_requirement(NODE_OCM_BANK_0, PM_CAP_CONTEXT, 0,
- REQ_ACK_NO);
-
- /* Check for other OCM banks */
- if ((unsigned long)&__BL31_END__ >= OCM_BANK_1)
- ret = pm_set_requirement(NODE_OCM_BANK_1, PM_CAP_CONTEXT, 0,
- REQ_ACK_NO);
- if ((unsigned long)&__BL31_END__ >= OCM_BANK_2)
- ret = pm_set_requirement(NODE_OCM_BANK_2, PM_CAP_CONTEXT, 0,
- REQ_ACK_NO);
- if ((unsigned long)&__BL31_END__ >= OCM_BANK_3)
- ret = pm_set_requirement(NODE_OCM_BANK_3, PM_CAP_CONTEXT, 0,
- REQ_ACK_NO);
-
- return ret;
-}
-
-/**
* pm_get_proc() - returns pointer to the proc structure
* @cpuid: id of the cpu whose proc struct pointer should be returned
*
diff --git a/plat/xilinx/zynqmp/pm_service/pm_defs.h b/plat/xilinx/zynqmp/pm_service/pm_defs.h
index a8921e7..7bbfec8 100644
--- a/plat/xilinx/zynqmp/pm_service/pm_defs.h
+++ b/plat/xilinx/zynqmp/pm_service/pm_defs.h
@@ -53,6 +53,10 @@
#define MAX_LATENCY (~0U)
#define MAX_QOS 100U
+/* State arguments of the self suspend */
+#define PM_STATE_CPU_IDLE 0x0U
+#define PM_STATE_SUSPEND_TO_RAM 0xFU
+
/*********************************************************************
* Enum definitions
********************************************************************/