qemu: Migrate to new interfaces
- Remove references to removed build options.
- Remove support for LOAD_IMAGE_V2=0.
- Migrate to sp_min_early_platform_setup2().
Change-Id: I884399139fb8e2554adeded888969f44672d56c0
Co-authored-by: Jens Wiklander <jens.wiklander@linaro.org>
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
diff --git a/plat/qemu/qemu_bl2_setup.c b/plat/qemu/qemu_bl2_setup.c
index b9a30d8..d76621d 100644
--- a/plat/qemu/qemu_bl2_setup.c
+++ b/plat/qemu/qemu_bl2_setup.c
@@ -20,103 +20,6 @@
/* Data structure which holds the extents of the trusted SRAM for BL2 */
static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
-#if !LOAD_IMAGE_V2
-/*******************************************************************************
- * This structure represents the superset of information that is passed to
- * BL3-1, e.g. while passing control to it from BL2, bl31_params
- * and other platform specific params
- ******************************************************************************/
-typedef struct bl2_to_bl31_params_mem {
- bl31_params_t bl31_params;
- image_info_t bl31_image_info;
- image_info_t bl32_image_info;
- image_info_t bl33_image_info;
- entry_point_info_t bl33_ep_info;
- entry_point_info_t bl32_ep_info;
- entry_point_info_t bl31_ep_info;
-} bl2_to_bl31_params_mem_t;
-
-
-static bl2_to_bl31_params_mem_t bl31_params_mem;
-
-
-meminfo_t *bl2_plat_sec_mem_layout(void)
-{
- return &bl2_tzram_layout;
-}
-
-/*******************************************************************************
- * This function assigns a pointer to the memory that the platform has kept
- * aside to pass platform specific and trusted firmware related information
- * to BL31. This memory is allocated by allocating memory to
- * bl2_to_bl31_params_mem_t structure which is a superset of all the
- * structure whose information is passed to BL31
- * NOTE: This function should be called only once and should be done
- * before generating params to BL31
- ******************************************************************************/
-bl31_params_t *bl2_plat_get_bl31_params(void)
-{
- bl31_params_t *bl2_to_bl31_params;
-
- /*
- * Initialise the memory for all the arguments that needs to
- * be passed to BL3-1
- */
- zeromem(&bl31_params_mem, sizeof(bl2_to_bl31_params_mem_t));
-
- /* Assign memory for TF related information */
- bl2_to_bl31_params = &bl31_params_mem.bl31_params;
- SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);
-
- /* Fill BL3-1 related information */
- bl2_to_bl31_params->bl31_image_info = &bl31_params_mem.bl31_image_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY,
- VERSION_1, 0);
-
- /* Fill BL3-2 related information */
- bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP,
- VERSION_1, 0);
- bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY,
- VERSION_1, 0);
-
- /* Fill BL3-3 related information */
- bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
- PARAM_EP, VERSION_1, 0);
-
- /* BL3-3 expects to receive the primary CPU MPID (through x0) */
- bl2_to_bl31_params->bl33_ep_info->args.arg0 = 0xffff & read_mpidr();
-
- bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info;
- SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY,
- VERSION_1, 0);
-
- return bl2_to_bl31_params;
-}
-
-/* Flush the TF params and the TF plat params */
-void bl2_plat_flush_bl31_params(void)
-{
- flush_dcache_range((unsigned long)&bl31_params_mem,
- sizeof(bl2_to_bl31_params_mem_t));
-}
-
-/*******************************************************************************
- * This function returns a pointer to the shared memory that the platform
- * has kept to point to entry point information of BL31 to BL2
- ******************************************************************************/
-struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
-{
-#if DEBUG
- bl31_params_mem.bl31_ep_info.args.arg1 = QEMU_BL31_PLAT_PARAM_VAL;
-#endif
-
- return &bl31_params_mem.bl31_ep_info;
-}
-#endif /* !LOAD_IMAGE_V2 */
-
void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1,
u_register_t arg2, u_register_t arg3)
{
@@ -174,7 +77,7 @@
}
#ifdef AARCH32
-#define QEMU_CONFIGURE_BL2_MMU(...) qemu_configure_mmu_secure(__VA_ARGS__)
+#define QEMU_CONFIGURE_BL2_MMU(...) qemu_configure_mmu_svc_mon(__VA_ARGS__)
#else
#define QEMU_CONFIGURE_BL2_MMU(...) qemu_configure_mmu_el1(__VA_ARGS__)
#endif
@@ -231,7 +134,6 @@
return spsr;
}
-#if LOAD_IMAGE_V2
static int qemu_bl2_handle_post_image_load(unsigned int image_id)
{
int err = 0;
@@ -304,75 +206,6 @@
{
return qemu_bl2_handle_post_image_load(image_id);
}
-
-#else /* LOAD_IMAGE_V2 */
-
-/*******************************************************************************
- * Before calling this function BL3-1 is loaded in memory and its entrypoint
- * is set by load_image. This is a placeholder for the platform to change
- * the entrypoint of BL3-1 and set SPSR and security state.
- * On ARM standard platforms we only set the security state of the entrypoint
- ******************************************************************************/
-void bl2_plat_set_bl31_ep_info(image_info_t *bl31_image_info,
- entry_point_info_t *bl31_ep_info)
-{
- SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
- bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
- DISABLE_ALL_EXCEPTIONS);
-}
-
-/*******************************************************************************
- * Before calling this function BL3-2 is loaded in memory and its entrypoint
- * is set by load_image. This is a placeholder for the platform to change
- * the entrypoint of BL3-2 and set SPSR and security state.
- * On ARM standard platforms we only set the security state of the entrypoint
- ******************************************************************************/
-void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info,
- entry_point_info_t *bl32_ep_info)
-{
- SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE);
- bl32_ep_info->spsr = qemu_get_spsr_for_bl32_entry();
-}
-
-/*******************************************************************************
- * Before calling this function BL3-3 is loaded in memory and its entrypoint
- * is set by load_image. This is a placeholder for the platform to change
- * the entrypoint of BL3-3 and set SPSR and security state.
- * On ARM standard platforms we only set the security state of the entrypoint
- ******************************************************************************/
-void bl2_plat_set_bl33_ep_info(image_info_t *image,
- entry_point_info_t *bl33_ep_info)
-{
-
- SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
- bl33_ep_info->spsr = qemu_get_spsr_for_bl33_entry();
-}
-
-/*******************************************************************************
- * Populate the extents of memory available for loading BL32
- ******************************************************************************/
-void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo)
-{
- /*
- * Populate the extents of memory available for loading BL32.
- */
- bl32_meminfo->total_base = BL32_BASE;
- bl32_meminfo->free_base = BL32_BASE;
- bl32_meminfo->total_size = (BL32_MEM_BASE + BL32_MEM_SIZE) - BL32_BASE;
- bl32_meminfo->free_size = (BL32_MEM_BASE + BL32_MEM_SIZE) - BL32_BASE;
-}
-
-/*******************************************************************************
- * Populate the extents of memory available for loading BL33
- ******************************************************************************/
-void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
-{
- bl33_meminfo->total_base = NS_DRAM0_BASE;
- bl33_meminfo->total_size = NS_DRAM0_SIZE;
- bl33_meminfo->free_base = NS_DRAM0_BASE;
- bl33_meminfo->free_size = NS_DRAM0_SIZE;
-}
-#endif /* !LOAD_IMAGE_V2 */
uintptr_t plat_get_ns_image_entrypoint(void)
{