diff --git a/plat/imx/imx8m/imx8mq/gpc.c b/plat/imx/imx8m/imx8mq/gpc.c
new file mode 100644
index 0000000..187a4ad
--- /dev/null
+++ b/plat/imx/imx8m/imx8mq/gpc.c
@@ -0,0 +1,243 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <debug.h>
+#include <gpc.h>
+#include <mmio.h>
+#include <platform_def.h>
+#include <psci.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <std_svc.h>
+
+void imx_set_cpu_secure_entry(unsigned int core_id, uintptr_t sec_entrypoint)
+{
+	uint64_t temp_base;
+
+	temp_base = (uint64_t) sec_entrypoint;
+	temp_base >>= 2;
+
+	mmio_write_32(IMX_SRC_BASE + SRC_GPR1_OFFSET + (core_id << 3),
+		((uint32_t)(temp_base >> 22) & 0xffff));
+	mmio_write_32(IMX_SRC_BASE + SRC_GPR1_OFFSET + (core_id << 3) + 4,
+		((uint32_t)temp_base & 0x003fffff));
+}
+
+/* use wfi power down the core */
+void imx_set_cpu_pwr_off(unsigned int core_id)
+{
+	/* enable the wfi power down of the core */
+	mmio_setbits_32(IMX_GPC_BASE + LPCR_A53_AD, COREx_WFI_PDN(core_id) |
+			(1 << (core_id + 20)));
+	/* assert the pcg pcr bit of the core */
+	mmio_setbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
+};
+
+/* use the sw method to power up the core */
+void imx_set_cpu_pwr_on(unsigned int core_id)
+{
+	/* clear the wfi power down bit of the core */
+	mmio_clrbits_32(IMX_GPC_BASE + LPCR_A53_AD, COREx_WFI_PDN(core_id));
+	/* assert the ncpuporeset */
+	mmio_clrbits_32(IMX_SRC_BASE + SRC_A53RCR1, (1 << core_id));
+	/* assert the pcg pcr bit of the core */
+	mmio_setbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
+	/* sw power up the core */
+	mmio_setbits_32(IMX_GPC_BASE + CPU_PGC_UP_TRG, (1 << core_id));
+
+	/* wait for the power up finished */
+	while ((mmio_read_32(IMX_GPC_BASE + CPU_PGC_UP_TRG) & (1 << core_id)) != 0)
+		;
+
+	/* deassert the pcg pcr bit of the core */
+	mmio_clrbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
+	/* deassert the ncpuporeset */
+	mmio_setbits_32(IMX_SRC_BASE + SRC_A53RCR1, (1 << core_id));
+}
+
+/* if out of lpm, we need to do reverse steps */
+void imx_set_cpu_lpm(unsigned int core_id, bool pdn)
+{
+	if (pdn) {
+		/* enable the core WFI PDN & IRQ PUP */
+		mmio_setbits_32(IMX_GPC_BASE + LPCR_A53_AD, COREx_WFI_PDN(core_id) |
+				(1 << (core_id + 20)) | COREx_IRQ_WUP(core_id));
+		/* assert the pcg pcr bit of the core */
+		mmio_setbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
+	} else {
+		/* disable CORE WFI PDN & IRQ PUP */
+		mmio_clrbits_32(IMX_GPC_BASE + LPCR_A53_AD, COREx_WFI_PDN(core_id) |
+				COREx_IRQ_WUP(core_id));
+		/* deassert the pcg pcr bit of the core */
+		mmio_setbits_32(IMX_GPC_BASE + COREx_PGC_PCR(core_id), 0x1);
+	}
+}
+
+void imx_set_sys_wakeup(unsigned int last_core, bool pdn)
+{
+	/* TODO */
+}
+
+void imx_pup_pdn_slot_config(int last_core, bool pdn)
+{
+	if (pdn) {
+		/* SLOT0 for A53 PLAT power down */
+		mmio_setbits_32(IMX_GPC_BASE + SLTx_CFG(0), SLT_PLAT_PDN);
+		/* SLOT1 for A53 PLAT power up */
+		mmio_setbits_32(IMX_GPC_BASE + SLTx_CFG(1), SLT_PLAT_PUP);
+		/* SLOT2 for A53 primary core power up */
+		mmio_setbits_32(IMX_GPC_BASE + SLTx_CFG(2), SLT_COREx_PUP(last_core));
+		/* ACK setting: PLAT ACK for PDN, CORE ACK for PUP */
+		mmio_clrsetbits_32(IMX_GPC_BASE + PGC_ACK_SEL_A53, 0xFFFFFFFF,
+			A53_PLAT_PDN_ACK | A53_PLAT_PUP_ACK);
+	} else {
+		mmio_clrbits_32(IMX_GPC_BASE + SLTx_CFG(0), 0xFFFFFFFF);
+		mmio_clrbits_32(IMX_GPC_BASE + SLTx_CFG(1), 0xFFFFFFFF);
+		mmio_clrbits_32(IMX_GPC_BASE + SLTx_CFG(2), 0xFFFFFFFF);
+		mmio_clrsetbits_32(IMX_GPC_BASE + PGC_ACK_SEL_A53, 0xFFFFFFFF,
+			A53_DUMMY_PDN_ACK | A53_DUMMY_PUP_ACK);
+	}
+}
+
+void imx_set_cluster_standby(bool retention)
+{
+	/*
+	 * Enable BIT 6 of A53 AD register to make sure system
+	 * don't enter LPM mode.
+	 */
+	if (retention)
+		mmio_setbits_32(IMX_GPC_BASE + LPCR_A53_AD, (1 << 6));
+	else
+		mmio_clrbits_32(IMX_GPC_BASE + LPCR_A53_AD, (1 << 6));
+}
+
+void imx_set_cluster_powerdown(unsigned int last_core, uint8_t power_state)
+{
+	uint32_t val;
+
+	if (is_local_state_off(power_state)) {
+		val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_BSC);
+		val |= A53_LPM_STOP; /* enable C0-C1's STOP mode */
+		val &= ~CPU_CLOCK_ON_LPM; /* disable CPU clock in LPM mode */
+		mmio_write_32(IMX_GPC_BASE + LPCR_A53_BSC, val);
+
+		/* enable C2-3's STOP mode */
+		mmio_setbits_32(IMX_GPC_BASE + LPCR_A53_BSC2, A53_LPM_STOP);
+
+		/* enable PLAT/SCU power down */
+		val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_AD);
+		val &= ~EN_L2_WFI_PDN;
+		val |= L2PGE | EN_PLAT_PDN;
+		val &= ~COREx_IRQ_WUP(last_core); /* disable IRQ PUP for last core */
+		val |= COREx_LPM_PUP(last_core); /* enable LPM PUP for last core */
+		mmio_write_32(IMX_GPC_BASE + LPCR_A53_AD, val);
+
+		imx_pup_pdn_slot_config(last_core, true);
+
+		/* enable PLAT PGC */
+		mmio_setbits_32(IMX_GPC_BASE + A53_PLAT_PGC, 0x1);
+	} else {
+		/* clear PLAT PGC */
+		mmio_clrbits_32(IMX_GPC_BASE + A53_PLAT_PGC, 0x1);
+
+		/* clear the slot and ack for cluster power down */
+		imx_pup_pdn_slot_config(last_core, false);
+
+		val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_BSC);
+		val &= ~A53_LPM_MASK; /* clear the C0~1 LPM */
+		val |= CPU_CLOCK_ON_LPM; /* disable cpu clock in LPM */
+		mmio_write_32(IMX_GPC_BASE + LPCR_A53_BSC, val);
+
+		/* set A53 LPM to RUN mode */
+		mmio_clrbits_32(IMX_GPC_BASE + LPCR_A53_BSC2, A53_LPM_MASK);
+
+		/* clear PLAT/SCU power down */
+		val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_AD);
+		val |= EN_L2_WFI_PDN;
+		val &= ~(L2PGE | EN_PLAT_PDN);
+		val &= ~COREx_LPM_PUP(last_core);  /* disable C0's LPM PUP */
+		mmio_write_32(IMX_GPC_BASE + LPCR_A53_AD, val);
+	}
+}
+
+/* config the system level power mode */
+void imx_set_sys_lpm(bool retention)
+{
+	uint32_t val;
+
+	/* set system DSM mode SLPCR(0x14) */
+	val = mmio_read_32(IMX_GPC_BASE + SLPCR);
+	val &= ~(SLPCR_EN_DSM | SLPCR_VSTBY | SLPCR_SBYOS |
+		 SLPCR_BYPASS_PMIC_READY | SLPCR_RBC_EN);
+
+	if (retention)
+		val |= (SLPCR_EN_DSM | SLPCR_VSTBY | SLPCR_SBYOS |
+			 SLPCR_BYPASS_PMIC_READY | SLPCR_RBC_EN |
+			 SLPCR_A53_FASTWUP_STOP_MODE);
+
+	mmio_write_32(IMX_GPC_BASE + SLPCR, val);
+}
+
+void imx_set_rbc_count(void)
+{
+	mmio_setbits_32(IMX_GPC_BASE + SLPCR, 0x3f << SLPCR_RBC_COUNT_SHIFT);
+}
+
+void imx_clear_rbc_count(void)
+{
+	mmio_clrbits_32(IMX_GPC_BASE + SLPCR, 0x3f << SLPCR_RBC_COUNT_SHIFT);
+}
+
+void imx_gpc_init(void)
+{
+	uint32_t val;
+	int i;
+	/* mask all the interrupt by default */
+	/* Due to the hardware design requirement, need to make
+	 * sure GPR interrupt(#32) is unmasked during RUN mode to
+	 * avoid entering DSM mode by mistake.
+	 */
+	for (i = 0; i < 4; i++) {
+		mmio_write_32(IMX_GPC_BASE + IMR1_CORE0_A53 + i * 4, 0xFFFFFFFE);
+		mmio_write_32(IMX_GPC_BASE + IMR1_CORE1_A53 + i * 4, 0xFFFFFFFE);
+		mmio_write_32(IMX_GPC_BASE + IMR1_CORE2_A53 + i * 4, 0xFFFFFFFE);
+		mmio_write_32(IMX_GPC_BASE + IMR1_CORE3_A53 + i * 4, 0xFFFFFFFE);
+		mmio_write_32(IMX_GPC_BASE + IMR1_CORE0_M4 + i * 4, ~0x0);
+	}
+
+	/* use external IRQs to wakeup C0~C3 from LPM */
+	val = mmio_read_32(IMX_GPC_BASE + LPCR_A53_BSC);
+	val |= IRQ_SRC_A53_WUP;
+	/* clear the MASTER0 LPM handshake */
+	val &= ~MASTER0_LPM_HSK;
+	mmio_write_32(IMX_GPC_BASE + LPCR_A53_BSC, val);
+
+	/* mask M4 DSM trigger if M4 is NOT enabled */
+	mmio_setbits_32(IMX_GPC_BASE + LPCR_M4, DSM_MODE_MASK);
+
+	/* set all mix/PU in A53 domain */
+	mmio_write_32(IMX_GPC_BASE + PGC_CPU_0_1_MAPPING, 0xfffd);
+
+	/* set SCU timming */
+	mmio_write_32(IMX_GPC_BASE + PGC_SCU_TIMING,
+		      (0x59 << 10) | 0x5B | (0x2 << 20));
+
+	/* set DUMMY PDN/PUP ACK by default for A53 domain */
+	mmio_write_32(IMX_GPC_BASE + PGC_ACK_SEL_A53, A53_DUMMY_PUP_ACK |
+		A53_DUMMY_PDN_ACK);
+
+	/* disable DSM mode by default */
+	mmio_clrbits_32(IMX_GPC_BASE + SLPCR, DSM_MODE_MASK);
+
+	/*
+	 * USB PHY power up needs to make sure RESET bit in SRC is clear,
+	 * otherwise, the PU power up bit in GPC will NOT self-cleared.
+	 * only need to do it once.
+	 */
+	mmio_clrbits_32(IMX_SRC_BASE + SRC_OTG1PHY_SCR, 0x1);
+	mmio_clrbits_32(IMX_SRC_BASE + SRC_OTG2PHY_SCR, 0x1);
+}