diff --git a/plat/arm/board/morello/fdts/morello_fw_config.dts b/plat/arm/board/morello/fdts/morello_fw_config.dts
index 6d48b90..c47bae5 100644
--- a/plat/arm/board/morello/fdts/morello_fw_config.dts
+++ b/plat/arm/board/morello/fdts/morello_fw_config.dts
@@ -16,5 +16,11 @@
 			max-size = <0x200>;
 			id = <TB_FW_CONFIG_ID>;
 		};
+
+		nt_fw-config {
+			load-address = <0x0 0xFEF00000>;
+			max-size = <0x0100000>;
+			id = <NT_FW_CONFIG_ID>;
+		};
 	};
 };
diff --git a/plat/arm/board/morello/fdts/morello_nt_fw_config.dts b/plat/arm/board/morello/fdts/morello_nt_fw_config.dts
new file mode 100644
index 0000000..e730d34
--- /dev/null
+++ b/plat/arm/board/morello/fdts/morello_nt_fw_config.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+/ {
+	/* compatible string */
+	compatible = "arm,morello";
+
+	/*
+	 * Place holder for platform-info node with default values.
+	 * The values will be set to the correct values during
+	 * the BL2 stage of boot.
+	 */
+	platform-info {
+		local-ddr-size = <0x0 0x0>;
+#ifdef TARGET_PLATFORM_SOC
+		remote-ddr-size = <0x0 0x0>;
+		remote-chip-count = <0x0>;
+		multichip-mode = <0x0>;
+		scc-config = <0x0>;
+#endif
+	};
+};
diff --git a/plat/arm/board/morello/morello_bl31_setup.c b/plat/arm/board/morello/morello_bl31_setup.c
index bece52e..e418518 100644
--- a/plat/arm/board/morello/morello_bl31_setup.c
+++ b/plat/arm/board/morello/morello_bl31_setup.c
@@ -204,7 +204,6 @@
 {
 	int ret;
 	struct morello_plat_info plat_info;
-	struct morello_plat_info *copy_dest;
 
 	ret = sds_init();
 	if (ret != SDS_OK) {
@@ -241,14 +240,4 @@
 #ifdef TARGET_PLATFORM_SOC
 	dmc_ecc_setup(&plat_info);
 #endif
-
-	/*
-	 * Pass platform information to BL33. This method is followed as
-	 * currently there is no BL1/BL2 involved in boot flow of MORELLO.
-	 * When TBBR is implemented for MORELLO, this method should be removed
-	 * and platform information should be passed to BL33 using NT_FW_CONFIG
-	 * passing mechanism.
-	 */
-	copy_dest = (struct morello_plat_info *)MORELLO_PLATFORM_INFO_BASE;
-	*copy_dest = plat_info;
 }
diff --git a/plat/arm/board/morello/morello_image_load.c b/plat/arm/board/morello/morello_image_load.c
new file mode 100644
index 0000000..52d46f3
--- /dev/null
+++ b/plat/arm/board/morello/morello_image_load.c
@@ -0,0 +1,185 @@
+/*
+ * Copyright (c) 2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <common/desc_image_load.h>
+#include <drivers/arm/css/sds.h>
+#include <libfdt.h>
+
+#include "morello_def.h"
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+#ifdef TARGET_PLATFORM_FVP
+/*
+ * Platform information structure stored in SDS.
+ * This structure holds information about platform's DDR
+ * size which is an information about multichip setup
+ *	- Local DDR size in bytes, DDR memory in main board
+ */
+struct morello_plat_info {
+	uint64_t local_ddr_size;
+} __packed;
+#else
+/*
+ * Platform information structure stored in SDS.
+ * This structure holds information about platform's DDR
+ * size which is an information about multichip setup
+ *	- Local DDR size in bytes, DDR memory in main board
+ *	- Remote DDR size in bytes, DDR memory in remote board
+ *	- remote_chip_count
+ *	- multichip mode
+ *	- scc configuration
+ */
+struct morello_plat_info {
+	uint64_t local_ddr_size;
+	uint64_t remote_ddr_size;
+	uint8_t remote_chip_count;
+	bool multichip_mode;
+	uint32_t scc_config;
+} __packed;
+#endif
+
+/* In client mode, a part of the DDR memory is reserved for Tag bits.
+ * Calculate the usable memory size after subtracting the Tag memory.
+ */
+static inline uint64_t get_mem_client_mode(uint64_t size)
+{
+	return (size - (size / 128ULL));
+}
+
+/*******************************************************************************
+ * This function inserts Platform information via device tree nodes as,
+ *	platform-info {
+ *		local-ddr-size = <0x0 0x0>;
+ *#ifdef TARGET_PLATFORM_SOC
+ *		remote-ddr-size = <0x0 0x0>;
+ *		remote-chip-count = <0x0>;
+ *		multichip-mode = <0x0>;
+ *		scc-config = <0x0>;
+ *#endif
+ *	};
+ ******************************************************************************/
+static int plat_morello_append_config_node(struct morello_plat_info *plat_info)
+{
+	bl_mem_params_node_t *mem_params;
+	void *fdt;
+	int nodeoffset, err;
+	uint64_t usable_mem_size;
+
+	usable_mem_size = plat_info->local_ddr_size;
+
+	mem_params = get_bl_mem_params_node(NT_FW_CONFIG_ID);
+	if (mem_params == NULL) {
+		ERROR("NT_FW CONFIG base address is NULL\n");
+		return -1;
+	}
+
+	fdt = (void *)(mem_params->image_info.image_base);
+
+	/* Check the validity of the fdt */
+	if (fdt_check_header(fdt) != 0) {
+		ERROR("Invalid NT_FW_CONFIG DTB passed\n");
+		return -1;
+	}
+
+	nodeoffset = fdt_subnode_offset(fdt, 0, "platform-info");
+	if (nodeoffset < 0) {
+		ERROR("NT_FW_CONFIG: Failed to get platform-info node offset\n");
+		return -1;
+	}
+
+#ifdef TARGET_PLATFORM_SOC
+	err = fdt_setprop_u64(fdt, nodeoffset, "remote-ddr-size",
+			plat_info->remote_ddr_size);
+	if (err < 0) {
+		ERROR("NT_FW_CONFIG: Failed to set remote-ddr-size\n");
+		return -1;
+	}
+
+	err = fdt_setprop_u32(fdt, nodeoffset, "remote-chip-count",
+			plat_info->remote_chip_count);
+	if (err < 0) {
+		ERROR("NT_FW_CONFIG: Failed to set remote-chip-count\n");
+		return -1;
+	}
+
+	err = fdt_setprop_u32(fdt, nodeoffset, "multichip-mode",
+			plat_info->multichip_mode);
+	if (err < 0) {
+		ERROR("NT_FW_CONFIG: Failed to set multichip-mode\n");
+		return -1;
+	}
+
+	err = fdt_setprop_u32(fdt, nodeoffset, "scc-config",
+			plat_info->scc_config);
+	if (err < 0) {
+		ERROR("NT_FW_CONFIG: Failed to set scc-config\n");
+		return -1;
+	}
+
+	if (plat_info->scc_config & MORELLO_SCC_CLIENT_MODE_MASK) {
+		usable_mem_size = get_mem_client_mode(plat_info->local_ddr_size);
+	}
+#endif
+	err = fdt_setprop_u64(fdt, nodeoffset, "local-ddr-size",
+			usable_mem_size);
+	if (err < 0) {
+		ERROR("NT_FW_CONFIG: Failed to set local-ddr-size\n");
+		return -1;
+	}
+
+	flush_dcache_range((uintptr_t)fdt, mem_params->image_info.image_size);
+
+	return 0;
+}
+
+/*******************************************************************************
+ * This function returns the list of executable images.
+ ******************************************************************************/
+bl_params_t *plat_get_next_bl_params(void)
+{
+	int ret;
+	struct morello_plat_info plat_info;
+
+	ret = sds_init();
+	if (ret != SDS_OK) {
+		ERROR("SDS initialization failed. ret:%d\n", ret);
+		panic();
+	}
+
+	ret = sds_struct_read(MORELLO_SDS_PLATFORM_INFO_STRUCT_ID,
+				MORELLO_SDS_PLATFORM_INFO_OFFSET,
+				&plat_info,
+				MORELLO_SDS_PLATFORM_INFO_SIZE,
+				SDS_ACCESS_MODE_NON_CACHED);
+	if (ret != SDS_OK) {
+		ERROR("Error getting platform info from SDS. ret:%d\n", ret);
+		panic();
+	}
+
+	/* Validate plat_info SDS */
+#ifdef TARGET_PLATFORM_FVP
+	if (plat_info.local_ddr_size == 0U) {
+#else
+	if ((plat_info.local_ddr_size == 0U)
+		|| (plat_info.local_ddr_size > MORELLO_MAX_DDR_CAPACITY)
+		|| (plat_info.remote_ddr_size > MORELLO_MAX_DDR_CAPACITY)
+		|| (plat_info.remote_chip_count > MORELLO_MAX_REMOTE_CHIP_COUNT)
+		){
+#endif
+		ERROR("platform info SDS is corrupted\n");
+		panic();
+	}
+
+	ret = plat_morello_append_config_node(&plat_info);
+	if (ret != 0) {
+		panic();
+	}
+
+	return arm_get_next_bl_params();
+}
diff --git a/plat/arm/board/morello/platform.mk b/plat/arm/board/morello/platform.mk
index b501381..26a1911 100644
--- a/plat/arm/board/morello/platform.mk
+++ b/plat/arm/board/morello/platform.mk
@@ -40,8 +40,10 @@
 BL2_SOURCES		:=	${MORELLO_BASE}/morello_security.c	\
 				${MORELLO_BASE}/morello_err.c		\
 				${MORELLO_BASE}/morello_trusted_boot.c	\
+				${MORELLO_BASE}/morello_bl2_setup.c	\
+				${MORELLO_BASE}/morello_image_load.c	\
 				lib/utils/mem_region.c			\
-				${MORELLO_BASE}/morello_bl2_setup.c
+				drivers/arm/css/sds/sds.c
 
 BL31_SOURCES		:=	${MORELLO_CPU_SOURCES}			\
 				${INTERCONNECT_SOURCES}			\
@@ -54,14 +56,18 @@
 FDT_SOURCES		+=	fdts/morello-${TARGET_PLATFORM}.dts		\
 				${MORELLO_BASE}/fdts/morello_fw_config.dts	\
 				${MORELLO_BASE}/fdts/morello_tb_fw_config.dts	\
+				${MORELLO_BASE}/fdts/morello_nt_fw_config.dts
 
 FW_CONFIG		:=	${BUILD_PLAT}/fdts/morello_fw_config.dtb
 TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/morello_tb_fw_config.dtb
+NT_FW_CONFIG		:=	${BUILD_PLAT}/fdts/morello_nt_fw_config.dtb
 
 # Add the FW_CONFIG to FIP and specify the same to certtool
 $(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config,${FW_CONFIG}))
 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
 $(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config,${TB_FW_CONFIG}))
+# Add the NT_FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${NT_FW_CONFIG},--nt-fw-config,${NT_FW_CONFIG}))
 
 MORELLO_FW_NVCTR_VAL	:=	0
 TFW_NVCTR_VAL		:=	${MORELLO_FW_NVCTR_VAL}