diff --git a/drivers/rpi3/mailbox/rpi3_mbox.c b/drivers/rpi3/mailbox/rpi3_mbox.c
new file mode 100644
index 0000000..aef1f39
--- /dev/null
+++ b/drivers/rpi3/mailbox/rpi3_mbox.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <lib/mmio.h>
+
+#include <rpi_hw.h>
+
+#include <drivers/rpi3/mailbox/rpi3_mbox.h>
+
+#define RPI3_MAILBOX_MAX_RETRIES	U(1000000)
+
+/*******************************************************************************
+ * Routine to send requests to the VideoCore using the mailboxes.
+ ******************************************************************************/
+void rpi3_vc_mailbox_request_send(rpi3_mbox_request_t *req, int req_size)
+{
+	uint32_t st, data;
+	uintptr_t resp_addr, addr;
+	unsigned int retries;
+
+	/* This is the location of the request buffer */
+	addr = (uintptr_t)req;
+
+	/* Make sure that the changes are seen by the VideoCore */
+	flush_dcache_range(addr, req_size);
+
+	/* Wait until the outbound mailbox is empty */
+	retries = 0U;
+
+	do {
+		st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX1_STATUS_OFFSET);
+
+		retries++;
+		if (retries == RPI3_MAILBOX_MAX_RETRIES) {
+			ERROR("rpi3: mbox: Send request timeout\n");
+			return;
+		}
+
+	} while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) == 0U);
+
+	/* Send base address of this message to start request */
+	mmio_write_32(RPI3_MBOX_BASE + RPI3_MBOX1_WRITE_OFFSET,
+		      RPI3_CHANNEL_ARM_TO_VC | (uint32_t) addr);
+
+	/* Wait until the inbound mailbox isn't empty */
+	retries = 0U;
+
+	do {
+		st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_STATUS_OFFSET);
+
+		retries++;
+		if (retries == RPI3_MAILBOX_MAX_RETRIES) {
+			ERROR("rpi3: mbox: Receive response timeout\n");
+			return;
+		}
+
+	} while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) != 0U);
+
+	/* Get location and channel */
+	data = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_READ_OFFSET);
+
+	if ((data & RPI3_CHANNEL_MASK) != RPI3_CHANNEL_ARM_TO_VC) {
+		ERROR("rpi3: mbox: Wrong channel: 0x%08x\n", data);
+		panic();
+	}
+
+	resp_addr = (uintptr_t)(data & ~RPI3_CHANNEL_MASK);
+	if (addr != resp_addr) {
+		ERROR("rpi3: mbox: Unexpected address: 0x%08x\n", data);
+		panic();
+	}
+
+	/* Make sure that the data seen by the CPU is up to date */
+	inv_dcache_range(addr, req_size);
+}
diff --git a/include/drivers/rpi3/mailbox/rpi3_mbox.h b/include/drivers/rpi3/mailbox/rpi3_mbox.h
new file mode 100644
index 0000000..c107440
--- /dev/null
+++ b/include/drivers/rpi3/mailbox/rpi3_mbox.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2019, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef RPI3_MBOX_H
+#define RPI3_MBOX_H
+
+#include <stdint.h>
+
+/* This struct must be aligned to 16 bytes */
+typedef struct __packed __aligned(16) rpi3_mbox_request {
+	uint32_t	size; /* Buffer size in bytes */
+	uint32_t	code; /* Request/response code */
+	uint32_t	tags[0];
+} rpi3_mbox_request_t;
+
+#define RPI3_MBOX_BUFFER_SIZE		U(256)
+
+/* Constants to perform a request/check the status of a request. */
+#define RPI3_MBOX_PROCESS_REQUEST	U(0x00000000)
+#define RPI3_MBOX_REQUEST_SUCCESSFUL	U(0x80000000)
+#define RPI3_MBOX_REQUEST_ERROR		U(0x80000001)
+
+/* Command constants */
+#define RPI3_TAG_HARDWARE_GET_BOARD_REVISION	U(0x00010002)
+#define RPI3_TAG_END				U(0x00000000)
+
+#define RPI3_TAG_REQUEST		U(0x00000000)
+#define RPI3_TAG_IS_RESPONSE		U(0x80000000) /* Set if response */
+#define RPI3_TAG_RESPONSE_LENGTH_MASK	U(0x7FFFFFFF)
+
+#define RPI3_CHANNEL_ARM_TO_VC		U(0x8)
+#define RPI3_CHANNEL_MASK		U(0xF)
+
+void rpi3_vc_mailbox_request_send(rpi3_mbox_request_t *req, int req_size);
+
+#endif
diff --git a/plat/rpi/rpi3/platform.mk b/plat/rpi/rpi3/platform.mk
index c011c0a..b0e7b70 100644
--- a/plat/rpi/rpi3/platform.mk
+++ b/plat/rpi/rpi3/platform.mk
@@ -21,7 +21,8 @@
 				plat/rpi/rpi3/aarch64/plat_helpers.S	\
 				plat/rpi/rpi3/rpi3_bl1_setup.c		\
 				plat/rpi/rpi3/rpi3_io_storage.c		\
-				plat/rpi/rpi3/rpi3_mbox.c
+				drivers/rpi3/mailbox/rpi3_mbox.c	\
+				plat/rpi/rpi3/rpi_mbox_board.c
 
 BL2_SOURCES		+=	common/desc_image_load.c		\
 				drivers/io/io_fip.c			\
diff --git a/plat/rpi/rpi3/rpi3_mbox.c b/plat/rpi/rpi3/rpi3_mbox.c
deleted file mode 100644
index 03b395e..0000000
--- a/plat/rpi/rpi3/rpi3_mbox.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <assert.h>
-
-#include <platform_def.h>
-
-#include <arch_helpers.h>
-#include <common/debug.h>
-#include <lib/mmio.h>
-
-#include <rpi_hw.h>
-
-/* This struct must be aligned to 16 bytes */
-typedef struct __packed __aligned(16) rpi3_mbox_request {
-	uint32_t	size; /* Buffer size in bytes */
-	uint32_t	code; /* Request/response code */
-	uint32_t	tags[0];
-} rpi3_mbox_request_t;
-
-#define RPI3_MBOX_BUFFER_SIZE		U(256)
-static uint8_t __aligned(16) rpi3_mbox_buffer[RPI3_MBOX_BUFFER_SIZE];
-
-/* Constants to perform a request/check the status of a request. */
-#define RPI3_MBOX_PROCESS_REQUEST	U(0x00000000)
-#define RPI3_MBOX_REQUEST_SUCCESSFUL	U(0x80000000)
-#define RPI3_MBOX_REQUEST_ERROR		U(0x80000001)
-
-/* Command constants */
-#define RPI3_TAG_HARDWARE_GET_BOARD_REVISION	U(0x00010002)
-#define RPI3_TAG_END				U(0x00000000)
-
-#define RPI3_TAG_REQUEST		U(0x00000000)
-#define RPI3_TAG_IS_RESPONSE		U(0x80000000) /* Set if response */
-#define RPI3_TAG_RESPONSE_LENGTH_MASK	U(0x7FFFFFFF)
-
-#define RPI3_CHANNEL_ARM_TO_VC		U(0x8)
-#define RPI3_CHANNEL_MASK		U(0xF)
-
-#define RPI3_MAILBOX_MAX_RETRIES	U(1000000)
-
-/*******************************************************************************
- * Helpers to send requests to the VideoCore using the mailboxes.
- ******************************************************************************/
-static void rpi3_vc_mailbox_request_send(void)
-{
-	uint32_t st, data;
-	uintptr_t resp_addr, addr;
-	unsigned int retries;
-
-	/* This is the location of the request buffer */
-	addr = (uintptr_t) &rpi3_mbox_buffer;
-
-	/* Make sure that the changes are seen by the VideoCore */
-	flush_dcache_range(addr, RPI3_MBOX_BUFFER_SIZE);
-
-	/* Wait until the outbound mailbox is empty */
-	retries = 0U;
-
-	do {
-		st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX1_STATUS_OFFSET);
-
-		retries++;
-		if (retries == RPI3_MAILBOX_MAX_RETRIES) {
-			ERROR("rpi3: mbox: Send request timeout\n");
-			return;
-		}
-
-	} while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) == 0U);
-
-	/* Send base address of this message to start request */
-	mmio_write_32(RPI3_MBOX_BASE + RPI3_MBOX1_WRITE_OFFSET,
-		      RPI3_CHANNEL_ARM_TO_VC | (uint32_t) addr);
-
-	/* Wait until the inbound mailbox isn't empty */
-	retries = 0U;
-
-	do {
-		st = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_STATUS_OFFSET);
-
-		retries++;
-		if (retries == RPI3_MAILBOX_MAX_RETRIES) {
-			ERROR("rpi3: mbox: Receive response timeout\n");
-			return;
-		}
-
-	} while ((st & RPI3_MBOX_STATUS_EMPTY_MASK) != 0U);
-
-	/* Get location and channel */
-	data = mmio_read_32(RPI3_MBOX_BASE + RPI3_MBOX0_READ_OFFSET);
-
-	if ((data & RPI3_CHANNEL_MASK) != RPI3_CHANNEL_ARM_TO_VC) {
-		ERROR("rpi3: mbox: Wrong channel: 0x%08x\n", data);
-		panic();
-	}
-
-	resp_addr = (uintptr_t)(data & ~RPI3_CHANNEL_MASK);
-	if (addr != resp_addr) {
-		ERROR("rpi3: mbox: Unexpected address: 0x%08x\n", data);
-		panic();
-	}
-
-	/* Make sure that the data seen by the CPU is up to date */
-	inv_dcache_range(addr, RPI3_MBOX_BUFFER_SIZE);
-}
-
-/*******************************************************************************
- * Request board revision. Returns the revision and 0 on success, -1 on error.
- ******************************************************************************/
-int rpi3_vc_hardware_get_board_revision(uint32_t *revision)
-{
-	uint32_t tag_request_size = sizeof(uint32_t);
-	rpi3_mbox_request_t *req = (rpi3_mbox_request_t *) rpi3_mbox_buffer;
-
-	assert(revision != NULL);
-
-	VERBOSE("rpi3: mbox: Sending request at %p\n", (void *)req);
-
-	req->size = sizeof(rpi3_mbox_buffer);
-	req->code = RPI3_MBOX_PROCESS_REQUEST;
-
-	req->tags[0] = RPI3_TAG_HARDWARE_GET_BOARD_REVISION;
-	req->tags[1] = tag_request_size; /* Space available for the response */
-	req->tags[2] = RPI3_TAG_REQUEST;
-	req->tags[3] = 0; /* Placeholder for the response */
-
-	req->tags[4] = RPI3_TAG_END;
-
-	rpi3_vc_mailbox_request_send();
-
-	if (req->code != RPI3_MBOX_REQUEST_SUCCESSFUL) {
-		ERROR("rpi3: mbox: Code = 0x%08x\n", req->code);
-		return -1;
-	}
-
-	if (req->tags[2] != (RPI3_TAG_IS_RESPONSE | tag_request_size)) {
-		ERROR("rpi3: mbox: get board revision failed (0x%08x)\n",
-		      req->tags[2]);
-		return -1;
-	}
-
-	*revision = req->tags[3];
-
-	return 0;
-}
diff --git a/plat/rpi/rpi3/rpi_mbox_board.c b/plat/rpi/rpi3/rpi_mbox_board.c
new file mode 100644
index 0000000..e7c1e2b
--- /dev/null
+++ b/plat/rpi/rpi3/rpi_mbox_board.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+
+#include <drivers/rpi3/mailbox/rpi3_mbox.h>
+
+#define RPI3_MBOX_BUFFER_SIZE		U(256)
+static uint8_t __aligned(16) rpi3_mbox_buffer[RPI3_MBOX_BUFFER_SIZE];
+
+/*******************************************************************************
+ * Request board revision. Returns the revision and 0 on success, -1 on error.
+ ******************************************************************************/
+int rpi3_vc_hardware_get_board_revision(uint32_t *revision)
+{
+	uint32_t tag_request_size = sizeof(uint32_t);
+	rpi3_mbox_request_t *req = (rpi3_mbox_request_t *) rpi3_mbox_buffer;
+
+	assert(revision != NULL);
+
+	VERBOSE("rpi3: mbox: Sending request at %p\n", (void *)req);
+
+	req->size = sizeof(rpi3_mbox_buffer);
+	req->code = RPI3_MBOX_PROCESS_REQUEST;
+
+	req->tags[0] = RPI3_TAG_HARDWARE_GET_BOARD_REVISION;
+	req->tags[1] = tag_request_size; /* Space available for the response */
+	req->tags[2] = RPI3_TAG_REQUEST;
+	req->tags[3] = 0; /* Placeholder for the response */
+
+	req->tags[4] = RPI3_TAG_END;
+
+	rpi3_vc_mailbox_request_send(req, RPI3_MBOX_BUFFER_SIZE);
+
+	if (req->code != RPI3_MBOX_REQUEST_SUCCESSFUL) {
+		ERROR("rpi3: mbox: Code = 0x%08x\n", req->code);
+		return -1;
+	}
+
+	if (req->tags[2] != (RPI3_TAG_IS_RESPONSE | tag_request_size)) {
+		ERROR("rpi3: mbox: get board revision failed (0x%08x)\n",
+		      req->tags[2]);
+		return -1;
+	}
+
+	*revision = req->tags[3];
+
+	return 0;
+}