feat(versal2): add support for AMD Versal Gen 2 platform
New SoC is a78 based with gicv3 and uart over pl011. Communication
interfaces are similar to Versal NET platform. System starts with AMD PLM
firmware which loads TF-A(bl31) to memory, which is already configured, and
jumps to it. PLM also prepare handoff structure for TF-A with information
what components were load and flags which indicate which EL level SW should
be started.
Change-Id: I5065b1b7ec4ee58e77dc4096747758480c84009c
Signed-off-by: Amit Nagal <amit.nagal@amd.com>
Signed-off-by: Akshay Belsare <akshay.belsare@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
diff --git a/plat/amd/versal2/soc_ipi.c b/plat/amd/versal2/soc_ipi.c
new file mode 100644
index 0000000..85d1bcd
--- /dev/null
+++ b/plat/amd/versal2/soc_ipi.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2022, Xilinx, Inc. All rights reserved.
+ * Copyright (c) 2022-2024, Advanced Micro Devices, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/*
+ * SoC IPI agent registers access management
+ */
+
+#include <lib/utils_def.h>
+#include <plat_ipi.h>
+
+/* versal2 ipi configuration table */
+static const struct ipi_config ipi_table[IPI_ID_MAX] = {
+ /* A78 IPI */
+ [IPI_ID_APU] = {
+ .ipi_bit_mask = IPI0_TRIG_BIT,
+ .ipi_reg_base = IPI0_REG_BASE,
+ .secure_only = 0,
+ },
+
+ /* PMC IPI */
+ [IPI_ID_PMC] = {
+ .ipi_bit_mask = PMC_IPI_TRIG_BIT,
+ .ipi_reg_base = IPI0_REG_BASE,
+ .secure_only = IPI_SECURE_MASK,
+ },
+
+ /* RPU0 IPI */
+ [IPI_ID_RPU0] = {
+ .ipi_bit_mask = IPI1_TRIG_BIT,
+ .ipi_reg_base = IPI1_REG_BASE,
+ .secure_only = 0,
+ },
+
+ /* RPU1 IPI */
+ [IPI_ID_RPU1] = {
+ .ipi_bit_mask = IPI2_TRIG_BIT,
+ .ipi_reg_base = IPI2_REG_BASE,
+ .secure_only = 0,
+ },
+
+ /* IPI3 IPI */
+ [IPI_ID_3] = {
+ .ipi_bit_mask = IPI3_TRIG_BIT,
+ .ipi_reg_base = IPI3_REG_BASE,
+ .secure_only = 0,
+ },
+
+ /* IPI4 IPI */
+ [IPI_ID_4] = {
+ .ipi_bit_mask = IPI4_TRIG_BIT,
+ .ipi_reg_base = IPI4_REG_BASE,
+ .secure_only = 0,
+ },
+
+ /* IPI5 IPI */
+ [IPI_ID_5] = {
+ .ipi_bit_mask = IPI5_TRIG_BIT,
+ .ipi_reg_base = IPI5_REG_BASE,
+ .secure_only = 0,
+ },
+};
+
+/**
+ * soc_ipi_config_table_init() - Initialize versal2 IPI configuration data.
+ */
+void soc_ipi_config_table_init(void)
+{
+ ipi_config_table_init(ipi_table, ARRAY_SIZE(ipi_table));
+}