diff --git a/bl31/aarch64/crash_reporting.S b/bl31/aarch64/crash_reporting.S
index 4050678..2c41029 100644
--- a/bl31/aarch64/crash_reporting.S
+++ b/bl31/aarch64/crash_reporting.S
@@ -28,7 +28,7 @@
 	 */
 .section .rodata.crash_prints, "aS"
 print_spacer:
-	.asciz	" =\t\t0x"
+	.asciz	"             = 0x"
 
 gp_regs:
 	.asciz	"x0", "x1", "x2", "x3", "x4", "x5", "x6", "x7",\
@@ -55,11 +55,11 @@
 #endif /* CTX_INCLUDE_AARCH32_REGS */
 
 panic_msg:
-	.asciz "PANIC in EL3 at x30 = 0x"
+	.asciz "PANIC in EL3.\nx30"
 excpt_msg:
-	.asciz "Unhandled Exception in EL3.\nx30 =\t\t0x"
+	.asciz "Unhandled Exception in EL3.\nx30"
 intr_excpt_msg:
-	.asciz "Unhandled Interrupt Exception in EL3.\nx30 =\t\t0x"
+	.asciz "Unhandled Interrupt Exception in EL3.\nx30"
 
 	/*
 	 * Helper function to print newline to console.
@@ -94,10 +94,11 @@
 	mov	x4, x6
 	/* asm_print_str updates x4 to point to next entry in list */
 	bl	asm_print_str
+	/* x0 = number of symbols printed + 1 */
+	sub	x0, x4, x6
 	/* update x6 with the updated list pointer */
 	mov	x6, x4
-	adr	x4, print_spacer
-	bl	asm_print_str
+	bl	print_alignment
 	ldr	x4, [x7], #REGSZ
 	bl	asm_print_hex
 	bl	print_newline
@@ -107,6 +108,20 @@
 	ret
 endfunc size_controlled_print
 
+	/* -----------------------------------------------------
+	 * This function calculates and prints required number
+	 * of space characters followed by "= 0x", based on the
+	 * length of ascii register name.
+ 	 * x0: length of ascii register name + 1
+	 * ------------------------------------------------------
+ 	 */
+func print_alignment
+	/* The minimum ascii length is 3, e.g. for "x0" */
+	adr	x4, print_spacer - 3
+	add	x4, x4, x0
+	b	asm_print_str
+endfunc print_alignment
+
 	/*
 	 * Helper function to store x8 - x15 registers to
 	 * the crash buf. The system registers values are
@@ -189,7 +204,7 @@
 	 * -----------------------------------------------------
 	 */
 func el3_panic
-	msr	spsel, #1
+	msr	spsel, #MODE_SP_ELX
 	prepare_crash_buf_save_x0_x1
 	adr	x0, panic_msg
 	mov	sp, x0
@@ -230,6 +245,9 @@
 	/* Print the crash message. sp points to the crash message */
 	mov	x4, sp
 	bl	asm_print_str
+	/* Print spaces to align "x30" string */
+	mov	x0, #4
+	bl	print_alignment
 	/* load the crash buf address */
 	mrs	x0, tpidr_el3
 	/* report x30 first from the crash buf */
diff --git a/common/aarch64/debug.S b/common/aarch64/debug.S
index da740ef..ac47cbe 100644
--- a/common/aarch64/debug.S
+++ b/common/aarch64/debug.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -10,6 +10,7 @@
 
 	.globl	asm_print_str
 	.globl	asm_print_hex
+	.globl	asm_print_hex_bits
 	.globl	asm_assert
 	.globl	do_panic
 
@@ -107,8 +108,11 @@
  * Clobber: x30, x0 - x3, x5
  */
 func asm_print_hex
-	mov	x3, x30
 	mov	x5, #64  /* No of bits to convert to ascii */
+
+	/* Convert to ascii number of bits in x5 */
+asm_print_hex_bits:
+	mov	x3, x30
 1:
 	sub	x5, x5, #4
 	lsrv	x0, x4, x5
diff --git a/drivers/console/multi_console.c b/drivers/console/multi_console.c
index d9eba7f..215f495 100644
--- a/drivers/console/multi_console.c
+++ b/drivers/console/multi_console.c
@@ -70,6 +70,20 @@
 	console->flags = (console->flags & ~CONSOLE_FLAG_SCOPE_MASK) | scope;
 }
 
+static int do_putc(int c, console_t *console)
+{
+	int ret;
+
+	if ((c == '\n') &&
+	    ((console->flags & CONSOLE_FLAG_TRANSLATE_CRLF) != 0)) {
+		ret = console->putc('\r', console);
+		if (ret < 0)
+			return ret;
+	}
+
+	return console->putc(c, console);
+}
+
 int console_putc(int c)
 {
 	int err = ERROR_NO_VALID_CONSOLE;
@@ -77,7 +91,7 @@
 
 	for (console = console_list; console != NULL; console = console->next)
 		if ((console->flags & console_state) && console->putc) {
-			int ret = console->putc(c, console);
+			int ret = do_putc(c, console);
 			if ((err == ERROR_NO_VALID_CONSOLE) || (ret < err))
 				err = ret;
 		}
diff --git a/drivers/renesas/rcar/emmc/emmc_interrupt.c b/drivers/renesas/rcar/emmc/emmc_interrupt.c
index 37a3cf9..2557280 100644
--- a/drivers/renesas/rcar/emmc/emmc_interrupt.c
+++ b/drivers/renesas/rcar/emmc/emmc_interrupt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights
+ * Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights
  * reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
@@ -26,17 +26,17 @@
 	uint32_t end_bit;
 
 	prr_data = mmio_read_32((uintptr_t) RCAR_PRR);
-	cut_ver = prr_data & RCAR_CUT_MASK;
-	if ((prr_data & RCAR_PRODUCT_MASK) == RCAR_PRODUCT_H3) {
-		if (cut_ver == RCAR_CUT_VER10) {
+	cut_ver = prr_data & PRR_CUT_MASK;
+	if ((prr_data & PRR_PRODUCT_MASK) == PRR_PRODUCT_H3) {
+		if (cut_ver == PRR_PRODUCT_10) {
 			end_bit = BIT17;
-		} else if (cut_ver == RCAR_CUT_VER11) {
+		} else if (cut_ver == PRR_PRODUCT_11) {
 			end_bit = BIT17;
 		} else {
 			end_bit = BIT20;
 		}
-	} else if ((prr_data & RCAR_PRODUCT_MASK) == RCAR_PRODUCT_M3) {
-		if (cut_ver == RCAR_CUT_VER10) {
+	} else if ((prr_data & PRR_PRODUCT_MASK) == PRR_PRODUCT_M3) {
+		if (cut_ver == PRR_PRODUCT_10) {
 			end_bit = BIT17;
 		} else {
 			end_bit = BIT20;
diff --git a/drivers/renesas/rcar/emmc/emmc_mount.c b/drivers/renesas/rcar/emmc/emmc_mount.c
index dd57b0c..df8203e 100644
--- a/drivers/renesas/rcar/emmc/emmc_mount.c
+++ b/drivers/renesas/rcar/emmc/emmc_mount.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -29,14 +29,14 @@
 {
 	uint32_t reg;
 
-	reg = mmio_read_32(RCAR_PRR) & (RCAR_PRODUCT_MASK | RCAR_CUT_MASK);
-	if (reg == RCAR_PRODUCT_M3_CUT10) {
+	reg = mmio_read_32(RCAR_PRR) & (PRR_PRODUCT_MASK | PRR_CUT_MASK);
+	if (reg == PRR_PRODUCT_M3_CUT10) {
 		mmc_drv_obj.boot_partition_en =
 		    (EMMC_PARTITION_ID) ((mmc_drv_obj.ext_csd_data[179] &
 					  EMMC_BOOT_PARTITION_EN_MASK) >>
 					 EMMC_BOOT_PARTITION_EN_SHIFT);
-	} else if ((reg == RCAR_PRODUCT_H3_CUT20)
-		   || (reg == RCAR_PRODUCT_M3_CUT11)) {
+	} else if ((reg == PRR_PRODUCT_H3_CUT20)
+		   || (reg == PRR_PRODUCT_M3_CUT11)) {
 		mmc_drv_obj.boot_partition_en = mmc_drv_obj.partition_access;
 	} else {
 		if ((mmio_read_32(MFISBTSTSR) & MFISBTSTSR_BOOT_PARTITION) !=
@@ -460,8 +460,8 @@
 	uint32_t reg;
 	EMMC_ERROR_CODE result;
 
-	reg = mmio_read_32(RCAR_PRR) & (RCAR_PRODUCT_MASK | RCAR_CUT_MASK);
-	if ((reg == RCAR_PRODUCT_H3_CUT20) || (reg == RCAR_PRODUCT_M3_CUT11)) {
+	reg = mmio_read_32(RCAR_PRR) & (PRR_PRODUCT_MASK | PRR_CUT_MASK);
+	if ((reg == PRR_PRODUCT_H3_CUT20) || (reg == PRR_PRODUCT_M3_CUT11)) {
 		SETR_32(SD_OPTION, 0x000060EEU);	/* 8 bits width */
 		/* CMD8 (EXT_CSD) */
 		emmc_make_trans_cmd(CMD8_SEND_EXT_CSD, 0x00000000U,
diff --git a/drivers/renesas/rcar/iic_dvfs/iic_dvfs.c b/drivers/renesas/rcar/iic_dvfs/iic_dvfs.c
index 39b9bb4..28b56c1 100644
--- a/drivers/renesas/rcar/iic_dvfs/iic_dvfs.c
+++ b/drivers/renesas/rcar/iic_dvfs/iic_dvfs.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -189,8 +189,8 @@
 	mode = mmio_read_8(IIC_DVFS_REG_ICCR) | IIC_DVFS_BIT_ICCR_ENABLE;
 	mmio_write_8(IIC_DVFS_REG_ICCR, mode);
 
-	lsi_product = mmio_read_32(RCAR_PRR) & RCAR_PRODUCT_MASK;
-	if (lsi_product == RCAR_PRODUCT_E3)
+	lsi_product = mmio_read_32(RCAR_PRR) & PRR_PRODUCT_MASK;
+	if (lsi_product == PRR_PRODUCT_E3)
 		goto start;
 
 	reg = mmio_read_32(RCAR_MODEMR) & CHECK_MD13_MD14;
diff --git a/drivers/renesas/rcar/pfc/M3/pfc_init_m3.c b/drivers/renesas/rcar/pfc/M3/pfc_init_m3.c
index 0aa3bff..7684c62 100644
--- a/drivers/renesas/rcar/pfc/M3/pfc_init_m3.c
+++ b/drivers/renesas/rcar/pfc/M3/pfc_init_m3.c
@@ -615,8 +615,8 @@
 	uint32_t reg;
 
 	reg = mmio_read_32(RCAR_PRR);
-	reg &= (RCAR_PRODUCT_MASK | RCAR_CUT_MASK);
-	if (reg == (RCAR_PRODUCT_M3_CUT10)) {
+	reg &= (PRR_PRODUCT_MASK | PRR_CUT_MASK);
+	if (reg == (PRR_PRODUCT_M3_CUT10)) {
 		/* Enable clock supply to RTDMAC. */
 		mstpcr_write(CPG_SCMSTPCR0, CPG_MSTPSR0, SCMSTPCR0_RTDMAC);
 
@@ -654,14 +654,14 @@
 	uint32_t prr;
 
 	prr = mmio_read_32(RCAR_PRR);
-	prr &= (RCAR_PRODUCT_MASK | RCAR_CUT_MASK);
+	prr &= (PRR_PRODUCT_MASK | PRR_CUT_MASK);
 
 	mmio_write_32(PFC_PMMR, ~data);
-	if (prr == (RCAR_PRODUCT_M3_CUT10)) {
+	if (prr == (PRR_PRODUCT_M3_CUT10)) {
 		mmio_write_16(SCIF3_SCFCR, SCFCR_DATA);	/* Dummy write */
 	}
 	mmio_write_32((uintptr_t)addr, data);
-	if (prr == (RCAR_PRODUCT_M3_CUT10)) {
+	if (prr == (PRR_PRODUCT_M3_CUT10)) {
 		mmio_write_16(SCIF3_SCFCR, SCFCR_DATA);	/* Dummy write */
 	}
 }
diff --git a/drivers/renesas/rcar/pfc/pfc_init.c b/drivers/renesas/rcar/pfc/pfc_init.c
index e9455af..8810667 100644
--- a/drivers/renesas/rcar/pfc/pfc_init.c
+++ b/drivers/renesas/rcar/pfc/pfc_init.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -37,20 +37,6 @@
 #include "D3/pfc_init_d3.h"
 #endif
 
- /* Product Register */
-#define PRR			(0xFFF00044U)
-#define PRR_PRODUCT_MASK	(0x00007F00U)
-#define PRR_CUT_MASK		(0x000000FFU)
-#define PRR_PRODUCT_H3		(0x00004F00U)	/* R-Car H3 */
-#define PRR_PRODUCT_M3		(0x00005200U)	/* R-Car M3 */
-#define PRR_PRODUCT_V3M		(0x00005400U)	/* R-Car V3M */
-#define PRR_PRODUCT_M3N		(0x00005500U)	/* R-Car M3N */
-#define PRR_PRODUCT_E3		(0x00005700U)	/* R-Car E3 */
-#define PRR_PRODUCT_D3		(0x00005800U)	/* R-Car D3 */
-#define PRR_PRODUCT_10		(0x00U)
-#define PRR_PRODUCT_11		(0x01U)
-#define PRR_PRODUCT_20		(0x10U)
-
 #define PRR_PRODUCT_ERR(reg)				\
 	do {						\
 		ERROR("LSI Product ID(PRR=0x%x) PFC initialize not supported.\n", \
@@ -71,8 +57,8 @@
 
 	reg = mmio_read_32(RCAR_PRR);
 #if RCAR_LSI == RCAR_AUTO
-	switch (reg & RCAR_PRODUCT_MASK) {
-	case RCAR_PRODUCT_H3:
+	switch (reg & PRR_PRODUCT_MASK) {
+	case PRR_PRODUCT_H3:
 		switch (reg & PRR_CUT_MASK) {
 		case PRR_PRODUCT_10:	/* H3 Ver.1.0 */
 			pfc_init_h3_v1();
@@ -85,13 +71,13 @@
 			break;
 		}
 		break;
-	case RCAR_PRODUCT_M3:
+	case PRR_PRODUCT_M3:
 		pfc_init_m3();
 		break;
-	case RCAR_PRODUCT_M3N:
+	case PRR_PRODUCT_M3N:
 		pfc_init_m3n();
 		break;
-	case RCAR_PRODUCT_V3M:
+	case PRR_PRODUCT_V3M:
 		pfc_init_v3m();
 		break;
 	default:
diff --git a/drivers/renesas/rcar/pfc/pfc_regs.h b/drivers/renesas/rcar/pfc/pfc_regs.h
index e7dd543..4187733 100644
--- a/drivers/renesas/rcar/pfc/pfc_regs.h
+++ b/drivers/renesas/rcar/pfc/pfc_regs.h
@@ -115,7 +115,6 @@
 #define GPIO_IOINTSEL6		(GPIO_BASE + 0x5400U)
 #define GPIO_INOUTSEL6		(GPIO_BASE + 0x5404U)
 #define GPIO_OUTDT6		(GPIO_BASE + 0x5408U)
-#define GPIO_INDT6		(GPIO_BASE + 0x540CU)
 #define GPIO_INTDT6		(GPIO_BASE + 0x5410U)
 #define GPIO_INTCLR6		(GPIO_BASE + 0x5414U)
 #define GPIO_INTMSK6		(GPIO_BASE + 0x5418U)
diff --git a/drivers/renesas/rcar/pwrc/pwrc.c b/drivers/renesas/rcar/pwrc/pwrc.c
index 32e04a7..2ce6b61 100644
--- a/drivers/renesas/rcar/pwrc/pwrc.c
+++ b/drivers/renesas/rcar/pwrc/pwrc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -314,16 +314,16 @@
 	rcar_lock_get();
 
 	reg = mmio_read_32(RCAR_PRR);
-	product = reg & RCAR_PRODUCT_MASK;
-	cut = reg & RCAR_CUT_MASK;
+	product = reg & PRR_PRODUCT_MASK;
+	cut = reg & PRR_CUT_MASK;
 
 	c = rcar_pwrc_get_mpidr_cluster(mpidr);
 	dst = IS_CA53(c) ? RCAR_CA53CPUCMCR : RCAR_CA57CPUCMCR;
 
-	if (RCAR_PRODUCT_M3 == product && cut < RCAR_CUT_VER30)
+	if (PRR_PRODUCT_M3 == product && cut < PRR_PRODUCT_30)
 		goto done;
 
-	if (RCAR_PRODUCT_H3 == product && cut <= RCAR_CUT_VER20)
+	if (PRR_PRODUCT_H3 == product && cut <= PRR_PRODUCT_20)
 		goto done;
 
 	/* all of the CPUs in the cluster is in the CoreStandby mode */
@@ -424,13 +424,13 @@
 	uint32_t reg = mmio_read_32(RCAR_PRR);
 	uint32_t cut, product;
 
-	product = reg & RCAR_PRODUCT_MASK;
-	cut = reg & RCAR_CUT_MASK;
+	product = reg & PRR_PRODUCT_MASK;
+	cut = reg & PRR_CUT_MASK;
 
-	if (product == RCAR_PRODUCT_M3 && cut < RCAR_CUT_VER30)
+	if (product == PRR_PRODUCT_M3 && cut < PRR_PRODUCT_30)
 		goto self_refresh;
 
-	if (product == RCAR_PRODUCT_H3 && cut < RCAR_CUT_VER20)
+	if (product == PRR_PRODUCT_H3 && cut < PRR_PRODUCT_20)
 		goto self_refresh;
 
 	mmio_write_32(DBSC4_REG_DBSYSCNT0, DBSC4_SET_DBSYSCNT0_WRITE_ENABLE);
@@ -445,16 +445,16 @@
 	/* Set the Self-Refresh mode */
 	mmio_write_32(DBSC4_REG_DBACEN, 0);
 
-	if (product == RCAR_PRODUCT_H3 && cut < RCAR_CUT_VER20)
+	if (product == PRR_PRODUCT_H3 && cut < PRR_PRODUCT_20)
 		rcar_micro_delay(100);
-	else if (product == RCAR_PRODUCT_H3) {
+	else if (product == PRR_PRODUCT_H3) {
 		mmio_write_32(DBSC4_REG_DBCAM0CTRL0, 1);
 		DBCAM_FLUSH(0);
 		DBCAM_FLUSH(1);
 		DBCAM_FLUSH(2);
 		DBCAM_FLUSH(3);
 		mmio_write_32(DBSC4_REG_DBCAM0CTRL0, 0);
-	} else if (product == RCAR_PRODUCT_M3) {
+	} else if (product == PRR_PRODUCT_M3) {
 		mmio_write_32(DBSC4_REG_DBCAM0CTRL0, 1);
 		DBCAM_FLUSH(0);
 		DBCAM_FLUSH(1);
@@ -499,10 +499,10 @@
 	mmio_write_32(DBSC4_REG_DBRFEN, 0U);
 	rcar_micro_delay(1U);
 
-	if (product == RCAR_PRODUCT_M3 && cut < RCAR_CUT_VER30)
+	if (product == PRR_PRODUCT_M3 && cut < PRR_PRODUCT_30)
 		return;
 
-	if (product == RCAR_PRODUCT_H3 && cut < RCAR_CUT_VER20)
+	if (product == PRR_PRODUCT_H3 && cut < PRR_PRODUCT_20)
 		return;
 
 	mmio_write_32(DBSC4_REG_DBSYSCNT0, DBSC4_SET_DBSYSCNT0_WRITE_DISABLE);
@@ -648,9 +648,9 @@
 	uint32_t reg, product;
 
 	reg = mmio_read_32(RCAR_PRR);
-	product = reg & RCAR_PRODUCT_MASK;
+	product = reg & PRR_PRODUCT_MASK;
 
-	if (product != RCAR_PRODUCT_E3)
+	if (product != PRR_PRODUCT_E3)
 		rcar_pwrc_set_self_refresh();
 	else
 		rcar_pwrc_set_self_refresh_e3();
diff --git a/drivers/renesas/rcar/qos/qos_init.c b/drivers/renesas/rcar/qos/qos_init.c
index 884e031..d0f1730 100644
--- a/drivers/renesas/rcar/qos/qos_init.c
+++ b/drivers/renesas/rcar/qos/qos_init.c
@@ -12,6 +12,7 @@
 #include "qos_init.h"
 #include "qos_common.h"
 #include "qos_reg.h"
+#include "rcar_def.h"
 #if RCAR_LSI == RCAR_AUTO
 #include "H3/qos_init_h3_v10.h"
 #include "H3/qos_init_h3_v11.h"
@@ -50,22 +51,6 @@
 #include "D3/qos_init_d3.h"
 #endif
 
- /* Product Register */
-#define PRR			0xFFF00044U
-#define PRR_PRODUCT_MASK	0x00007F00U
-#define PRR_CUT_MASK		0x000000FFU
-#define PRR_PRODUCT_H3		0x00004F00U	/* R-Car H3 */
-#define PRR_PRODUCT_M3		0x00005200U	/* R-Car M3 */
-#define PRR_PRODUCT_V3M		0x00005400U	/* R-Car V3M */
-#define PRR_PRODUCT_M3N		0x00005500U	/* R-Car M3N */
-#define PRR_PRODUCT_E3		0x00005700U	/* R-Car E3 */
-#define PRR_PRODUCT_D3		0x00005800U	/* R-Car D3 */
-#define PRR_PRODUCT_10		0x00U
-#define PRR_PRODUCT_11		0x01U
-#define PRR_PRODUCT_20		0x10U
-#define PRR_PRODUCT_21		0x11U
-#define PRR_PRODUCT_30		0x20U
-
 #if (RCAR_LSI != RCAR_E3) && (RCAR_LSI != RCAR_D3) && (RCAR_LSI != RCAR_V3M)
 
 #define DRAM_CH_CNT			0x04
diff --git a/drivers/renesas/rcar/rom/rom_api.c b/drivers/renesas/rcar/rom/rom_api.c
index c9f8f5f..fda2815 100644
--- a/drivers/renesas/rcar/rom/rom_api.c
+++ b/drivers/renesas/rcar/rom/rom_api.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -30,30 +30,30 @@
 	uint32_t cut_ver;
 	uint32_t index;
 
-	product = mmio_read_32(RCAR_PRR) & RCAR_PRODUCT_MASK;
-	cut_ver = mmio_read_32(RCAR_PRR) & RCAR_CUT_MASK;
+	product = mmio_read_32(RCAR_PRR) & PRR_PRODUCT_MASK;
+	cut_ver = mmio_read_32(RCAR_PRR) & PRR_CUT_MASK;
 
 	switch (product) {
-	case RCAR_PRODUCT_H3:
-		if (cut_ver == RCAR_CUT_VER10)
+	case PRR_PRODUCT_H3:
+		if (cut_ver == PRR_PRODUCT_10)
 			index = OLD_API_TABLE1;
-		else if (cut_ver == RCAR_CUT_VER11)
+		else if (cut_ver == PRR_PRODUCT_11)
 			index = OLD_API_TABLE1;
-		else if (cut_ver == RCAR_CUT_VER20)
+		else if (cut_ver == PRR_PRODUCT_20)
 			index = OLD_API_TABLE2;
 		else
 			/* Later than H3 Ver.2.0 */
 			index = NEW_API_TABLE;
 		break;
-	case RCAR_PRODUCT_M3:
-		if (cut_ver == RCAR_CUT_VER10)
+	case PRR_PRODUCT_M3:
+		if (cut_ver == PRR_PRODUCT_10)
 			index = OLD_API_TABLE3;
 		else
 			/* M3 Ver.1.1 or later */
 			index = NEW_API_TABLE;
 		break;
-	case RCAR_PRODUCT_V3M:
-		if (cut_ver == RCAR_CUT_VER10)
+	case PRR_PRODUCT_V3M:
+		if (cut_ver == PRR_PRODUCT_10)
 			/* V3M WS1.0 */
 			index = NEW_API_TABLE2;
 		else
diff --git a/drivers/renesas/rcar/rpc/rpc_driver.c b/drivers/renesas/rcar/rpc/rpc_driver.c
index 5c11b62..63de5b8 100644
--- a/drivers/renesas/rcar/rpc/rpc_driver.c
+++ b/drivers/renesas/rcar/rpc/rpc_driver.c
@@ -34,10 +34,10 @@
 	if (mmio_read_32(RPC_CMNCR) & RPC_CMNCR_MD_BIT)
 		mmio_clrbits_32(RPC_CMNCR, RPC_CMNCR_MD_BIT);
 
-	product = mmio_read_32(RCAR_PRR) & RCAR_PRODUCT_MASK;
-	cut = mmio_read_32(RCAR_PRR) & RCAR_CUT_MASK;
+	product = mmio_read_32(RCAR_PRR) & PRR_PRODUCT_MASK;
+	cut = mmio_read_32(RCAR_PRR) & PRR_CUT_MASK;
 
-	if ((product ==  RCAR_PRODUCT_M3) && (cut < RCAR_CUT_VER30))
+	if ((product ==  PRR_PRODUCT_M3) && (cut < PRR_PRODUCT_30))
 		phy_strtim = RPC_PHYCNT_STRTIM_M3V1;
 	else
 		phy_strtim = RPC_PHYCNT_STRTIM;
diff --git a/drivers/renesas/rcar/watchdog/swdt.c b/drivers/renesas/rcar/watchdog/swdt.c
index 8b2943c..111e651 100644
--- a/drivers/renesas/rcar/watchdog/swdt.c
+++ b/drivers/renesas/rcar/watchdog/swdt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -82,7 +82,7 @@
 	uint32_t reg, val, product_cut, chk_data;
 
 	reg = mmio_read_32(RCAR_PRR);
-	product_cut = reg & (RCAR_PRODUCT_MASK | RCAR_CUT_MASK);
+	product_cut = reg & (PRR_PRODUCT_MASK | PRR_CUT_MASK);
 
 	reg = mmio_read_32(RCAR_MODEMR);
 	chk_data = reg & CHECK_MD13_MD14;
@@ -108,7 +108,7 @@
 		val |= WTCNT_COUNT_8p22k;
 		break;
 	case MD14_MD13_TYPE_3:
-		val |= product_cut == (RCAR_PRODUCT_H3 | RCAR_CUT_VER10) ?
+		val |= product_cut == (PRR_PRODUCT_H3 | PRR_PRODUCT_10) ?
 		    WTCNT_COUNT_8p13k_H3VER10 : WTCNT_COUNT_8p13k;
 		break;
 	default:
diff --git a/drivers/staging/renesas/rcar/ddr/ddr_b/boot_init_dram.c b/drivers/staging/renesas/rcar/ddr/ddr_b/boot_init_dram.c
index 89d666c..2cce653 100644
--- a/drivers/staging/renesas/rcar/ddr/ddr_b/boot_init_dram.c
+++ b/drivers/staging/renesas/rcar/ddr/ddr_b/boot_init_dram.c
@@ -20,6 +20,7 @@
 #include "boot_init_dram.h"
 #include "dram_sub_func.h"
 #include "micro_delay.h"
+#include "rcar_def.h"
 
 #define DDR_BACKUPMODE
 #define FATAL_MSG(x) NOTICE(x)
diff --git a/drivers/staging/renesas/rcar/ddr/ddr_b/boot_init_dram_config.c b/drivers/staging/renesas/rcar/ddr/ddr_b/boot_init_dram_config.c
index 5d1b078..aaa5f00 100644
--- a/drivers/staging/renesas/rcar/ddr/ddr_b/boot_init_dram_config.c
+++ b/drivers/staging/renesas/rcar/ddr/ddr_b/boot_init_dram_config.c
@@ -1622,7 +1622,6 @@
 #define PFC_PUD5	0xE6060454U
 #define PFC_PUD6	0xE6060458U
 #define GPIO_INDT5	0xE605500CU
-#define GPIO_INDT6	0xE605540CU
 #define GPIO_GPSR6 	0xE6060118U
 
 #if (RCAR_GEN3_ULCB == 0)
diff --git a/drivers/staging/renesas/rcar/ddr/ddr_b/boot_init_dram_regdef.h b/drivers/staging/renesas/rcar/ddr/ddr_b/boot_init_dram_regdef.h
index a1cbfbf..abddf0c 100644
--- a/drivers/staging/renesas/rcar/ddr/ddr_b/boot_init_dram_regdef.h
+++ b/drivers/staging/renesas/rcar/ddr/ddr_b/boot_init_dram_regdef.h
@@ -55,19 +55,6 @@
 
 #define LIFEC_CHIPID(x)		(0xE6110040U + 0x04U * (x))
 
-/* Product Register */
-#define PRR			(0xFFF00044U)
-#define PRR_PRODUCT_MASK	(0x00007F00U)
-#define PRR_CUT_MASK		(0x000000FFU)
-#define PRR_PRODUCT_H3		(0x00004F00U)	/* R-Car H3   */
-#define PRR_PRODUCT_M3		(0x00005200U)	/* R-Car M3-W */
-#define PRR_PRODUCT_M3N		(0x00005500U)	/* R-Car M3-N */
-#define PRR_PRODUCT_V3H		(0x00005600U)	/* R-Car V3H  */
-#define PRR_PRODUCT_10		(0x00U)	/*   Ver.1.0  */
-#define PRR_PRODUCT_11		(0x01U)	/*   Ver.1.1  */
-#define PRR_PRODUCT_20		(0x10U)	/*   Ver.2.0  */
-#define PRR_PRODUCT_30		(0x20U)	/*   Ver.3.0  */
-
 /* DBSC registers */
 #define DBSC_DBSYSCONF1		0xE6790004U
 #define DBSC_DBPHYCONF0		0xE6790010U
diff --git a/drivers/staging/renesas/rcar/ddr/dram_sub_func.c b/drivers/staging/renesas/rcar/ddr/dram_sub_func.c
index 6739b0d..c6ab44a 100644
--- a/drivers/staging/renesas/rcar/ddr/dram_sub_func.c
+++ b/drivers/staging/renesas/rcar/ddr/dram_sub_func.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -8,15 +8,7 @@
 #include <lib/mmio.h>
 
 #include "dram_sub_func.h"
-
-#define PRR				(0xFFF00044U)
-#define PRR_PRODUCT_MASK		(0x00007F00U)
-#define PRR_CUT_MASK			(0x000000FFU)
-#define PRR_PRODUCT_H3			(0x00004F00U)	/* R-Car H3  */
-#define PRR_PRODUCT_M3			(0x00005200U)	/* R-Car M3  */
-#define PRR_PRODUCT_M3N			(0x00005500U)	/* R-Car M3N */
-#define PRR_PRODUCT_E3			(0x00005700U)	/* R-Car E3  */
-#define PRR_PRODUCT_V3H			(0x00005600U)	/* R-Car V3H */
+#include "rcar_def.h"
 
 #if RCAR_SYSTEM_SUSPEND
 /* Local defines */
@@ -32,11 +24,9 @@
 #endif
 
 #define	GPIO_OUTDT1			(0xE6051008U)
-#define GPIO_INDT1			(0xE605100CU)
 #define GPIO_OUTDT3			(0xE6053008U)
 #define GPIO_INDT3			(0xE605300CU)
 #define GPIO_OUTDT6			(0xE6055408U)
-#define GPIO_INDT6			(0xE605540CU)
 
 #if DRAM_BACKUP_GPIO_USE == 1
 #define GPIO_BKUP_REQB_SHIFT_SALVATOR	(9U)	/* GP1_9 (BKUP_REQB) */
diff --git a/include/arch/aarch64/arch.h b/include/arch/aarch64/arch.h
index fa857fb..2b4ae1a 100644
--- a/include/arch/aarch64/arch.h
+++ b/include/arch/aarch64/arch.h
@@ -112,6 +112,7 @@
 /* CLIDR definitions */
 #define LOUIS_SHIFT		U(21)
 #define LOC_SHIFT		U(24)
+#define CTYPE_SHIFT(n)		U(3 * (n - 1))
 #define CLIDR_FIELD_WIDTH	U(3)
 
 /* CSSELR definitions */
diff --git a/include/drivers/console.h b/include/drivers/console.h
index cada771..a4859d8 100644
--- a/include/drivers/console.h
+++ b/include/drivers/console.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -21,7 +21,8 @@
 #define CONSOLE_FLAG_CRASH		(U(1) << 2)
 /* Bits 3 to 7 reserved for additional scopes in future expansion. */
 #define CONSOLE_FLAG_SCOPE_MASK		((U(1) << 8) - 1)
-/* Bits 8 to 31 reserved for non-scope use in future expansion. */
+/* Bits 8 to 31 for non-scope use. */
+#define CONSOLE_FLAG_TRANSLATE_CRLF	(U(1) << 8)
 
 /* Returned by getc callbacks when receive FIFO is empty. */
 #define ERROR_NO_PENDING_CHAR		(-1)
diff --git a/include/plat/arm/common/aarch64/arm_macros.S b/include/plat/arm/common/aarch64/arm_macros.S
index 0bd0daf..d47e4e0 100644
--- a/include/plat/arm/common/aarch64/arm_macros.S
+++ b/include/plat/arm/common/aarch64/arm_macros.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -22,11 +22,13 @@
 
 /* Registers common to both GICv2 and GICv3 */
 gicd_pend_reg:
-	.asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n Offset:\t\t\tvalue\n"
+	.asciz "gicd_ispendr regs (Offsets 0x200-0x278)\nOffset\t\t\tValue\n"
 newline:
 	.asciz "\n"
 spacer:
-	.asciz ":\t\t0x"
+	.asciz ":\t\t 0x"
+prefix:
+	.asciz "0x"
 
 	/* ---------------------------------------------
 	 * The below utility macro prints out relevant GIC
@@ -77,7 +79,15 @@
 	sub	x4, x7, x16
 	cmp	x4, #0x280
 	b.eq	exit_print_gic_regs
-	bl	asm_print_hex
+
+	/* Print "0x" */
+	adr	x4, prefix
+	bl	asm_print_str
+
+	/* Print offset */
+	sub	x4, x7, x16
+	mov	x5, #12
+	bl	asm_print_hex_bits
 
 	adr	x4, spacer
 	bl	asm_print_str
diff --git a/lib/aarch32/arm32_aeabi_divmod.c b/lib/aarch32/arm32_aeabi_divmod.c
index 0b36cb6..ea8e2bb 100644
--- a/lib/aarch32/arm32_aeabi_divmod.c
+++ b/lib/aarch32/arm32_aeabi_divmod.c
@@ -33,13 +33,11 @@
 unsigned int __aeabi_uidivmod(unsigned int numerator, unsigned int denominator);
 
 unsigned int __aeabi_uidiv(unsigned int numerator, unsigned int denominator);
-unsigned int __aeabi_uimod(unsigned int numerator, unsigned int denominator);
 
 /* returns in R0 and R1 by tail calling an asm function */
 signed int __aeabi_idivmod(signed int numerator, signed int denominator);
 
 signed int __aeabi_idiv(signed int numerator, signed int denominator);
-signed int __aeabi_imod(signed int numerator, signed int denominator);
 
 /*
  * __ste_idivmod_ret_t __aeabi_idivmod(signed numerator, signed denominator)
@@ -106,15 +104,6 @@
 	return qr.q;
 }
 
-unsigned int __aeabi_uimod(unsigned int numerator, unsigned int denominator)
-{
-	struct qr qr = { .q_n = 0, .r_n = 0 };
-
-	uint_div_qr(numerator, denominator, &qr);
-
-	return qr.r;
-}
-
 unsigned int __aeabi_uidivmod(unsigned int numerator, unsigned int denominator)
 {
 	struct qr qr = { .q_n = 0, .r_n = 0 };
@@ -145,42 +134,6 @@
 	return qr.q;
 }
 
-signed int __aeabi_imod(signed int numerator, signed int denominator)
-{
-	signed int s;
-	signed int i;
-	signed int j;
-	signed int h;
-	struct qr qr = { .q_n = 0, .r_n = 0 };
-
-	/* in case modulo of a power of 2 */
-	for (i = 0, j = 0, h = 0, s = denominator; (s != 0) || (h > 1); i++) {
-		if (s & 1) {
-			j = i;
-			h++;
-		}
-		s = s >> 1;
-	}
-	if (h == 1)
-		return numerator >> j;
-
-	if (((numerator < 0) && (denominator > 0)) ||
-	    ((numerator > 0) && (denominator < 0)))
-		qr.q_n = 1;	/* quotient shall be negate */
-
-	if (numerator < 0) {
-		numerator = -numerator;
-		qr.r_n = 1;	/* remainder shall be negate */
-	}
-
-	if (denominator < 0)
-		denominator = -denominator;
-
-	uint_div_qr(numerator, denominator, &qr);
-
-	return qr.r;
-}
-
 signed int __aeabi_idivmod(signed int numerator, signed int denominator)
 {
 	struct qr qr = { .q_n = 0, .r_n = 0 };
diff --git a/lib/cpus/aarch64/aem_generic.S b/lib/cpus/aarch64/aem_generic.S
index 51b5ce9..6291e43 100644
--- a/lib/cpus/aarch64/aem_generic.S
+++ b/lib/cpus/aarch64/aem_generic.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014-2015, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2014-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -18,15 +18,43 @@
 	msr	sctlr_el3, x1
 	isb
 
+	/* ---------------------------------------------
+	 * AEM model supports L3 caches in which case L2
+	 * will be private per core caches and flush
+	 * from L1 to L2 is not sufficient.
+	 * ---------------------------------------------
+	 */
+	mrs	x1, clidr_el1
+
+	/* ---------------------------------------------
+	 * Check if L3 cache is implemented.
+	 * ---------------------------------------------
+	 */
+	tst	x1, ((1 << CLIDR_FIELD_WIDTH) - 1) << CTYPE_SHIFT(3)
+
+	/* ---------------------------------------------
+	 * There is no L3 cache, flush L1 to L2 only.
+	 * ---------------------------------------------
+	 */
 	mov	x0, #DCCISW
+	b.eq	dcsw_op_level1
+
+	mov	x18, x30
 
 	/* ---------------------------------------------
-	 * Flush L1 cache to PoU.
+	 * Flush L1 cache to L2.
 	 * ---------------------------------------------
 	 */
-	b	dcsw_op_louis
-endfunc aem_generic_core_pwr_dwn
+	bl	dcsw_op_level1
+	mov	x30, x18
 
+	/* ---------------------------------------------
+	 * Flush L2 cache to L3.
+	 * ---------------------------------------------
+	 */
+	mov	x0, #DCCISW
+	b	dcsw_op_level2
+endfunc aem_generic_core_pwr_dwn
 
 func aem_generic_cluster_pwr_dwn
 	/* ---------------------------------------------
@@ -39,7 +67,7 @@
 	isb
 
 	/* ---------------------------------------------
-	 * Flush L1 and L2 caches to PoC.
+	 * Flush all caches to PoC.
 	 * ---------------------------------------------
 	 */
 	mov	x0, #DCCISW
diff --git a/lib/cpus/aarch64/neoverse_n1.S b/lib/cpus/aarch64/neoverse_n1.S
index b143a2e..31e7a3a 100644
--- a/lib/cpus/aarch64/neoverse_n1.S
+++ b/lib/cpus/aarch64/neoverse_n1.S
@@ -43,6 +43,7 @@
 	msr	CPUPMR_EL3, x0
 	ldr	x0, =0x800200071
 	msr	CPUPCR_EL3, x0
+	isb
 1:
 	ret	x17
 endfunc errata_n1_1043202_wa
diff --git a/lib/extensions/ras/ras_common.c b/lib/extensions/ras/ras_common.c
index be8bece..64a4852 100644
--- a/lib/extensions/ras/ras_common.c
+++ b/lib/extensions/ras/ras_common.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -83,7 +83,8 @@
 {
 	struct ras_interrupt *ras_inrs = ras_interrupt_mappings.intrs;
 	struct ras_interrupt *selected = NULL;
-	int start, end, mid, probe_data, ret __unused;
+	int probe_data = 0;
+	int start, end, mid, ret __unused;
 
 	const struct err_handler_data err_data = {
 		.version = ERR_HANDLER_VERSION,
diff --git a/lib/psci/psci_common.c b/lib/psci/psci_common.c
index 5d24356..022c877 100644
--- a/lib/psci/psci_common.c
+++ b/lib/psci/psci_common.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -198,21 +198,17 @@
 /******************************************************************************
  * Helper function to update the requested local power state array. This array
  * does not store the requested state for the CPU power level. Hence an
- * assertion is added to prevent us from accessing the wrong index.
+ * assertion is added to prevent us from accessing the CPU power level.
  *****************************************************************************/
 static void psci_set_req_local_pwr_state(unsigned int pwrlvl,
 					 unsigned int cpu_idx,
 					 plat_local_state_t req_pwr_state)
 {
-	/*
-	 * This should never happen, we have this here to avoid
-	 * "array subscript is above array bounds" errors in GCC.
-	 */
 	assert(pwrlvl > PSCI_CPU_PWR_LVL);
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Warray-bounds"
-	psci_req_local_pwr_states[pwrlvl - 1U][cpu_idx] = req_pwr_state;
-#pragma GCC diagnostic pop
+	if ((pwrlvl > PSCI_CPU_PWR_LVL) && (pwrlvl <= PLAT_MAX_PWR_LVL) &&
+			(cpu_idx < PLATFORM_CORE_COUNT)) {
+		psci_req_local_pwr_states[pwrlvl - 1U][cpu_idx] = req_pwr_state;
+	}
 }
 
 /******************************************************************************
@@ -245,7 +241,11 @@
 {
 	assert(pwrlvl > PSCI_CPU_PWR_LVL);
 
-	return &psci_req_local_pwr_states[pwrlvl - 1U][cpu_idx];
+	if ((pwrlvl > PSCI_CPU_PWR_LVL) && (pwrlvl <= PLAT_MAX_PWR_LVL) &&
+			(cpu_idx < PLATFORM_CORE_COUNT)) {
+		return &psci_req_local_pwr_states[pwrlvl - 1U][cpu_idx];
+	} else
+		return NULL;
 }
 
 /*
diff --git a/lib/xlat_tables/aarch32/nonlpae_tables.c b/lib/xlat_tables/aarch32/nonlpae_tables.c
index e31f9d8..bd6b152 100644
--- a/lib/xlat_tables/aarch32/nonlpae_tables.c
+++ b/lib/xlat_tables/aarch32/nonlpae_tables.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2016-2017, Linaro Limited. All rights reserved.
- * Copyright (c) 2014-2017, Arm Limited. All rights reserved.
+ * Copyright (c) 2014-2019, Arm Limited. All rights reserved.
  * Copyright (c) 2014, STMicroelectronics International N.V.
  * All rights reserved.
  *
@@ -445,7 +445,8 @@
 			} else {
 				xlat_table = (unsigned long)mmu_l2_base +
 					next_xlat * MMU32B_L2_TABLE_SIZE;
-				assert(++next_xlat <= MAX_XLAT_TABLES);
+				next_xlat++;
+				assert(next_xlat <= MAX_XLAT_TABLES);
 				memset((char *)xlat_table, 0,
 					MMU32B_L2_TABLE_SIZE);
 
diff --git a/plat/arm/board/fvp/fvp_bl1_setup.c b/plat/arm/board/fvp/fvp_bl1_setup.c
index b90ddcd..8f6170d 100644
--- a/plat/arm/board/fvp/fvp_bl1_setup.c
+++ b/plat/arm/board/fvp/fvp_bl1_setup.c
@@ -48,6 +48,9 @@
 {
 	arm_bl1_platform_setup();
 
+	/* Initialize System level generic or SP804 timer */
+	fvp_timer_init();
+
 	/* On FVP RevC, initialize SMMUv3 */
 	if ((arm_config.flags & ARM_CONFIG_FVP_HAS_SMMUV3) != 0U)
 		smmuv3_security_init(PLAT_FVP_SMMUV3_BASE);
diff --git a/plat/arm/board/fvp/fvp_bl2_setup.c b/plat/arm/board/fvp/fvp_bl2_setup.c
index d280949..89636d1 100644
--- a/plat/arm/board/fvp/fvp_bl2_setup.c
+++ b/plat/arm/board/fvp/fvp_bl2_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -25,15 +25,6 @@
 {
 	arm_bl2_platform_setup();
 
-#if FVP_USE_SP804_TIMER
-	/* Enable the clock override for SP804 timer 0, which means that no
-	 * clock dividers are applied and the raw (35 MHz) clock will be used */
-	mmio_write_32(V2M_SP810_BASE, FVP_SP810_CTRL_TIM0_OV);
-
-	/* Initialize delay timer driver using SP804 dual timer 0 */
-	sp804_timer_init(V2M_SP804_TIMER0_BASE,
-			SP804_TIMER_CLKMULT, SP804_TIMER_CLKDIV);
-#else
-	generic_delay_timer_init();
-#endif /* FVP_USE_SP804_TIMER */
+	/* Initialize System level generic or SP804 timer */
+	fvp_timer_init();
 }
diff --git a/plat/arm/board/fvp/fvp_bl2u_setup.c b/plat/arm/board/fvp/fvp_bl2u_setup.c
index a8db055..fd73767 100644
--- a/plat/arm/board/fvp/fvp_bl2u_setup.c
+++ b/plat/arm/board/fvp/fvp_bl2u_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -14,6 +14,9 @@
 {
 	arm_bl2u_early_platform_setup(mem_layout, plat_info);
 
+	/* Initialize System level generic or SP804 timer */
+	fvp_timer_init();
+
 	/* Initialize the platform config for future decision making */
 	fvp_config_setup();
 }
diff --git a/plat/arm/board/fvp/fvp_bl31_setup.c b/plat/arm/board/fvp/fvp_bl31_setup.c
index 3f92d37..8627c5e 100644
--- a/plat/arm/board/fvp/fvp_bl31_setup.c
+++ b/plat/arm/board/fvp/fvp_bl31_setup.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -34,6 +34,9 @@
 	 */
 	fvp_interconnect_enable();
 
+	/* Initialize System level generic or SP804 timer */
+	fvp_timer_init();
+
 	/* On FVP RevC, initialize SMMUv3 */
 	if ((arm_config.flags & ARM_CONFIG_FVP_HAS_SMMUV3) != 0U)
 		smmuv3_init(PLAT_FVP_SMMUV3_BASE);
diff --git a/plat/arm/board/fvp/fvp_common.c b/plat/arm/board/fvp/fvp_common.c
index 36cd500..a948796 100644
--- a/plat/arm/board/fvp/fvp_common.c
+++ b/plat/arm/board/fvp/fvp_common.c
@@ -10,6 +10,8 @@
 #include <drivers/arm/cci.h>
 #include <drivers/arm/ccn.h>
 #include <drivers/arm/gicv2.h>
+#include <drivers/arm/sp804_delay_timer.h>
+#include <drivers/generic_delay_timer.h>
 #include <lib/mmio.h>
 #include <lib/xlat_tables/xlat_tables_compat.h>
 #include <plat/arm/common/arm_config.h>
@@ -407,3 +409,23 @@
 	return arm_get_mbedtls_heap(heap_addr, heap_size);
 }
 #endif
+
+void fvp_timer_init(void)
+{
+#if FVP_USE_SP804_TIMER
+	/* Enable the clock override for SP804 timer 0, which means that no
+	 * clock dividers are applied and the raw (35MHz) clock will be used.
+	 */
+	mmio_write_32(V2M_SP810_BASE, FVP_SP810_CTRL_TIM0_OV);
+
+	/* Initialize delay timer driver using SP804 dual timer 0 */
+	sp804_timer_init(V2M_SP804_TIMER0_BASE,
+			SP804_TIMER_CLKMULT, SP804_TIMER_CLKDIV);
+#else
+	generic_delay_timer_init();
+
+	/* Enable System level generic timer */
+	mmio_write_32(ARM_SYS_CNTCTL_BASE + CNTCR_OFF,
+			CNTCR_FCREQ(0U) | CNTCR_EN);
+#endif /* FVP_USE_SP804_TIMER */
+}
diff --git a/plat/arm/board/fvp/fvp_private.h b/plat/arm/board/fvp/fvp_private.h
index 5067d3a..3590370 100644
--- a/plat/arm/board/fvp/fvp_private.h
+++ b/plat/arm/board/fvp/fvp_private.h
@@ -18,6 +18,7 @@
 void fvp_interconnect_init(void);
 void fvp_interconnect_enable(void);
 void fvp_interconnect_disable(void);
+void fvp_timer_init(void);
 void tsp_early_platform_setup(void);
 
 #endif /* FVP_PRIVATE_H */
diff --git a/plat/arm/board/fvp/platform.mk b/plat/arm/board/fvp/platform.mk
index 0eb62c4..617da2d 100644
--- a/plat/arm/board/fvp/platform.mk
+++ b/plat/arm/board/fvp/platform.mk
@@ -127,6 +127,7 @@
 
 BL1_SOURCES		+=	drivers/arm/smmu/smmu_v3.c			\
 				drivers/arm/sp805/sp805.c			\
+				drivers/delay_timer/delay_timer.c		\
 				drivers/io/io_semihosting.c			\
 				lib/semihosting/semihosting.c			\
 				lib/semihosting/${ARCH}/semihosting_call.S	\
@@ -138,6 +139,12 @@
 				${FVP_CPU_LIBS}					\
 				${FVP_INTERCONNECT_SOURCES}
 
+ifeq (${FVP_USE_SP804_TIMER},1)
+BL1_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
+else
+BL1_SOURCES		+=	drivers/delay_timer/generic_delay_timer.c
+endif
+
 
 BL2_SOURCES		+=	drivers/arm/sp805/sp805.c			\
 				drivers/io/io_semihosting.c			\
@@ -167,8 +174,13 @@
 BL2U_SOURCES		+=	plat/arm/board/fvp/fvp_bl2u_setup.c		\
 				${FVP_SECURITY_SOURCES}
 
+ifeq (${FVP_USE_SP804_TIMER},1)
+BL2U_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
+endif
+
 BL31_SOURCES		+=	drivers/arm/fvp/fvp_pwrc.c			\
 				drivers/arm/smmu/smmu_v3.c			\
+				drivers/delay_timer/delay_timer.c		\
 				drivers/cfi/v2m/v2m_flash.c			\
 				lib/utils/mem_region.c				\
 				plat/arm/board/fvp/fvp_bl31_setup.c		\
@@ -181,6 +193,12 @@
 				${FVP_INTERCONNECT_SOURCES}			\
 				${FVP_SECURITY_SOURCES}
 
+ifeq (${FVP_USE_SP804_TIMER},1)
+BL31_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
+else
+BL31_SOURCES		+=	drivers/delay_timer/generic_delay_timer.c
+endif
+
 # Add the FDT_SOURCES and options for Dynamic Config (only for Unix env)
 ifdef UNIX_MK
 FVP_HW_CONFIG_DTS	:=	fdts/${FVP_DT_PREFIX}.dts
diff --git a/plat/arm/board/juno/fdts/juno_tb_fw_config.dts b/plat/arm/board/juno/fdts/juno_tb_fw_config.dts
new file mode 100644
index 0000000..a8ab6c5
--- /dev/null
+++ b/plat/arm/board/juno/fdts/juno_tb_fw_config.dts
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+	/* Platform Config */
+	compatible = "arm,tb_fw";
+	/* Disable authentication for development */
+	disable_auth = <0x0>;
+	/*
+	 * The following two entries are placeholders for Mbed TLS
+	 * heap information. The default values don't matter since
+	 * they will be overwritten by BL1.
+	 * In case of having shared Mbed TLS heap between BL1 and BL2,
+	 * BL1 will populate these two properties with the respective
+	 * info about the shared heap. This info will be available for
+	 * BL2 in order to locate and re-use the heap.
+	 */
+	mbedtls_heap_addr = <0x0 0x0>;
+	mbedtls_heap_size = <0x0>;
+};
diff --git a/plat/arm/board/juno/juno_common.c b/plat/arm/board/juno/juno_common.c
index 98c5d3c..9570d2d 100644
--- a/plat/arm/board/juno/juno_common.c
+++ b/plat/arm/board/juno/juno_common.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -47,6 +47,9 @@
 	ARM_MAP_OPTEE_CORE_MEM,
 	ARM_OPTEE_PAGEABLE_LOAD_MEM,
 #endif
+#if TRUSTED_BOARD_BOOT && !BL2_AT_EL3
+	ARM_MAP_BL1_RW,
+#endif
 	{0}
 };
 #endif
diff --git a/plat/arm/board/juno/juno_security.c b/plat/arm/board/juno/juno_security.c
index 6566b15..32823e0 100644
--- a/plat/arm/board/juno/juno_security.c
+++ b/plat/arm/board/juno/juno_security.c
@@ -3,6 +3,7 @@
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
+#include <assert.h>
 
 #include <common/debug.h>
 #include <drivers/arm/nic_400.h>
@@ -149,6 +150,9 @@
 #if TRUSTED_BOARD_BOOT
 int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size)
 {
-	return get_mbedtls_heap_helper(heap_addr, heap_size);
+	assert(heap_addr != NULL);
+	assert(heap_size != NULL);
+
+	return arm_get_mbedtls_heap(heap_addr, heap_size);
 }
 #endif
diff --git a/plat/arm/board/juno/platform.mk b/plat/arm/board/juno/platform.mk
index ea7f851..bd6bae5 100644
--- a/plat/arm/board/juno/platform.mk
+++ b/plat/arm/board/juno/platform.mk
@@ -150,8 +150,14 @@
     endif
 endif
 
+# Add the FDT_SOURCES and options for Dynamic Config
+FDT_SOURCES		+=	plat/arm/board/juno/fdts/${PLAT}_tb_fw_config.dts
+TB_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
+
+# Add the TB_FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config))
+
 include plat/arm/board/common/board_common.mk
 include plat/arm/common/arm_common.mk
 include plat/arm/soc/common/soc_css.mk
 include plat/arm/css/common/css_common.mk
-
diff --git a/plat/common/aarch64/crash_console_helpers.S b/plat/common/aarch64/crash_console_helpers.S
index 2a48baf..e2950f5 100644
--- a/plat/common/aarch64/crash_console_helpers.S
+++ b/plat/common/aarch64/crash_console_helpers.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -125,9 +125,18 @@
 	b.eq	putc_continue
 	ldr	x2, [x15, #CONSOLE_T_PUTC]
 	cbz	x2, putc_continue
+	cmp	w14, #'\n'
+	b.ne	putc
+	tst	w1, #CONSOLE_FLAG_TRANSLATE_CRLF
+	b.eq	putc
 	mov	x1, x15
+	mov	w0, #'\r'
 	blr	x2
+	ldr	x2, [x15, #CONSOLE_T_PUTC]
+putc:
+	mov	x1, x15
 	mov	w0, w14
+	blr	x2
 putc_continue:
 	ldr	x15, [x15]			/* X15 = next struct */
 	b	putc_loop
diff --git a/plat/intel/soc/agilex/bl2_plat_setup.c b/plat/intel/soc/agilex/bl2_plat_setup.c
index 385065f..e9ab928 100644
--- a/plat/intel/soc/agilex/bl2_plat_setup.c
+++ b/plat/intel/soc/agilex/bl2_plat_setup.c
@@ -69,9 +69,9 @@
 	deassert_peripheral_reset();
 	config_hps_hs_before_warm_reset();
 
-	watchdog_init(get_wdt_clk(&reverse_handoff_ptr));
+	watchdog_init(get_wdt_clk());
 
-	console_16550_register(PLAT_UART0_BASE, PLAT_UART_CLOCK, PLAT_BAUDRATE,
+	console_16550_register(PLAT_UART0_BASE, get_uart_clk(), PLAT_BAUDRATE,
 		&console);
 
 	socfpga_delay_timer_init();
@@ -105,7 +105,7 @@
 
 	enable_mmu_el3(0);
 
-	dw_mmc_params_t params = EMMC_INIT_PARAMS(0x100000);
+	dw_mmc_params_t params = EMMC_INIT_PARAMS(0x100000, get_mmc_clk());
 
 	info.mmc_dev_type = MMC_IS_SD;
 	info.ocr_voltage = OCR_3_3_3_4 | OCR_3_2_3_3;
diff --git a/plat/intel/soc/agilex/include/agilex_clock_manager.h b/plat/intel/soc/agilex/include/agilex_clock_manager.h
index c1a7546..73e6c4e 100644
--- a/plat/intel/soc/agilex/include/agilex_clock_manager.h
+++ b/plat/intel/soc/agilex/include/agilex_clock_manager.h
@@ -80,41 +80,38 @@
 #define CLKMGR_STAT_PERPLLLOCKED(x)		(((x) & 0x00010000) >> 16)
 #define CLKMGR_INTRCLR_MAINLOCKLOST_SET_MSK	0x00000004
 #define CLKMGR_INTRCLR_PERLOCKLOST_SET_MSK	0x00000008
+#define CLKMGR_INTOSC_HZ			460000000
 
 /* Main PLL Macros */
 #define CLKMGR_MAINPLL_EN_RESET			0x000000ff
-#define CLKMGR_MAINPLL_PLLM_MDIV(x)		((x) & 0x000003ff)
-#define CLKMGR_MAINPLL_PLLGLOB_PD_SET_MSK	0x00000001
-#define CLKMGR_MAINPLL_PLLGLOB_RST_SET_MSK	0x00000002
-
-#define CLKMGR_MAINPLL_PLLGLOB_REFCLKDIV(x)	(((x) & 0x00003f00) >> 8)
-#define CLKMGR_MAINPLL_PLLGLOB_AREFCLKDIV(x)	(((x) & 0x00000f00) >> 8)
-#define CLKMGR_MAINPLL_PLLGLOB_DREFCLKDIV(x)	(((x) & 0x00003000) >> 12)
-
-#define CLKMGR_MAINPLL_PLLGLOB_PSRC(x)		(((x) & 0x00030000) >> 16)
-#define CLKMGR_MAINPLL_PLLGLOB_PSRC_EOSC1	0x0
-#define CLKMGR_MAINPLL_PLLGLOB_PSRC_INTOSC	0x1
-#define CLKMGR_MAINPLL_PLLGLOB_PSRC_F2S		0x2
-#define CLKMGR_MAINPLL_VCOCALIB_HSCNT_SET(x)	(((x) << 0) & 0x000003ff)
-#define CLKMGR_MAINPLL_VCOCALIB_MSCNT_SET(x)	(((x) << 16) & 0x00ff0000)
 
 /* Peripheral PLL Macros */
 #define CLKMGR_PERPLL_EN_RESET			0x00000fff
-#define CLKMGR_PERPLL_PLLM_MDIV(x)		((x) & 0x000003ff)
 #define CLKMGR_PERPLL_GPIODIV_GPIODBCLK_SET(x)	(((x) << 0) & 0x0000ffff)
-#define CLKMGR_PERPLL_PLLGLOB_PD_SET_MSK	0x00000001
-
-#define CLKMGR_PERPLL_PLLGLOB_REFCLKDIV(x)	(((x) & 0x00003f00) >> 8)
-#define CLKMGR_PERPLL_PLLGLOB_AREFCLKDIV(x)	(((x) & 0x00000f00) >> 8)
-#define CLKMGR_PERPLL_PLLGLOB_DREFCLKDIV(x)	(((x) & 0x00003000) >> 12)
-
-#define CLKMGR_PERPLL_PLLGLOB_RST_SET_MSK	0x00000002
-#define CLKMGR_PERPLL_VCOCALIB_HSCNT_SET(x)	(((x) << 0) & 0x000003ff)
-#define CLKMGR_PERPLL_VCOCALIB_MSCNT_SET(x)	(((x) << 16) & 0x00ff0000)
 
 /* Altera Macros */
 #define CLKMGR_ALTERA_EXTCNTRST_RESET		0xff
 
+/* Shared Macros */
+#define CLKMGR_PSRC(x)				(((x) & 0x00030000) >> 16)
+#define CLKMGR_PSRC_MAIN			0
+#define CLKMGR_PSRC_PER				1
+
+#define CLKMGR_PLLGLOB_PSRC_EOSC1		0x0
+#define CLKMGR_PLLGLOB_PSRC_INTOSC		0x1
+#define CLKMGR_PLLGLOB_PSRC_F2S			0x2
+
+#define CLKMGR_PLLM_MDIV(x)			((x) & 0x000003ff)
+#define CLKMGR_PLLGLOB_PD_SET_MSK		0x00000001
+#define CLKMGR_PLLGLOB_RST_SET_MSK		0x00000002
+
+#define CLKMGR_PLLGLOB_REFCLKDIV(x)		(((x) & 0x00003f00) >> 8)
+#define CLKMGR_PLLGLOB_AREFCLKDIV(x)		(((x) & 0x00000f00) >> 8)
+#define CLKMGR_PLLGLOB_DREFCLKDIV(x)		(((x) & 0x00003000) >> 12)
+
+#define CLKMGR_VCOCALIB_HSCNT_SET(x)		(((x) << 0) & 0x000003ff)
+#define CLKMGR_VCOCALIB_MSCNT_SET(x)		(((x) << 16) & 0x00ff0000)
+
 
 typedef struct {
 	uint32_t  clk_freq_of_eosc1;
@@ -123,6 +120,8 @@
 } CLOCK_SOURCE_CONFIG;
 
 void config_clkmgr_handoff(handoff *hoff_ptr);
-int get_wdt_clk(handoff *hoff_ptr);
+uint32_t get_wdt_clk(void);
+uint32_t get_uart_clk(void);
+uint32_t get_mmc_clk(void);
 
 #endif
diff --git a/plat/intel/soc/agilex/include/agilex_memory_controller.h b/plat/intel/soc/agilex/include/agilex_memory_controller.h
index c0c94e6..419bd2e 100644
--- a/plat/intel/soc/agilex/include/agilex_memory_controller.h
+++ b/plat/intel/soc/agilex/include/agilex_memory_controller.h
@@ -10,6 +10,8 @@
 #define AGX_MPFE_IOHMC_REG_DRAMADDRW			0xf80100a8
 #define AGX_MPFE_IOHMC_CTRLCFG0				0xf8010028
 #define AGX_MPFE_IOHMC_CTRLCFG1				0xf801002c
+#define AGX_MPFE_IOHMC_CTRLCFG2				0xf8010030
+#define AGX_MPFE_IOHMC_CTRLCFG3				0xf8010034
 #define AGX_MPFE_IOHMC_DRAMADDRW			0xf80100a8
 #define AGX_MPFE_IOHMC_DRAMTIMING0			0xf8010050
 #define AGX_MPFE_IOHMC_CALTIMING0			0xf801007c
@@ -127,6 +129,7 @@
 #define AGX_NOC_FW_DDR_SCR_NONMPUREGION0ADDR_LIMIT	0xf8020298
 
 #define AGX_SOC_NOC_FW_DDR_SCR_ENABLE			0xf8020200
+#define AGX_SOC_NOC_FW_DDR_SCR_ENABLESET		0xf8020204
 #define AGX_CCU_NOC_DI_SET_MSK				0x10
 
 #define AGX_SYSMGR_CORE_HMC_CLK				0xffd120b4
@@ -156,6 +159,7 @@
 #define IOHMC_DRAMADDRW_CFG_ROW_ADDR_WIDTH(x)		(((x) & 0x003e0) >> 5)
 
 #define AGX_SDRAM_0_LB_ADDR				0x0
+#define AGX_DDR_SIZE					0x40000000
 
 int init_hard_memory_controller(void);
 
diff --git a/plat/intel/soc/agilex/include/agilex_private.h b/plat/intel/soc/agilex/include/agilex_private.h
index 5ccbc8c..fc0e9fd 100644
--- a/plat/intel/soc/agilex/include/agilex_private.h
+++ b/plat/intel/soc/agilex/include/agilex_private.h
@@ -11,14 +11,13 @@
 #define AGX_MMC_REG_BASE	0xff808000
 
 #define EMMC_DESC_SIZE		(1<<20)
-#define EMMC_INIT_PARAMS(base)			\
+#define EMMC_INIT_PARAMS(base, clk)		\
 	{	.bus_width = MMC_BUS_WIDTH_4,	\
-		.clk_rate = 50000000,		\
+		.clk_rate = (clk),		\
 		.desc_base = (base),		\
 		.desc_size = EMMC_DESC_SIZE,	\
 		.flags = 0,			\
-		.reg_base = AGX_MMC_REG_BASE,	\
-		\
+		.reg_base = AGX_MMC_REG_BASE	\
 	}
 
 typedef enum {
@@ -26,7 +25,7 @@
 	BOOT_SOURCE_SDMMC,
 	BOOT_SOURCE_NAND,
 	BOOT_SOURCE_RSVD,
-	BOOT_SOURCE_QSPI,
+	BOOT_SOURCE_QSPI
 } boot_source_type;
 
 void enable_nonsecure_access(void);
diff --git a/plat/intel/soc/agilex/include/agilex_system_manager.h b/plat/intel/soc/agilex/include/agilex_system_manager.h
index 6ec2084..381c2d3 100644
--- a/plat/intel/soc/agilex/include/agilex_system_manager.h
+++ b/plat/intel/soc/agilex/include/agilex_system_manager.h
@@ -65,6 +65,11 @@
 #define AGX_CCU_NOC_CPU0_RAMSPACE0_0		0xf7004688
 #define AGX_CCU_NOC_IOM_RAMSPACE0_0		0xf7018628
 
+#define AGX_SYSMGR_CORE(x)                      (0xffd12000 + (x))
+#define SYSMGR_BOOT_SCRATCH_COLD_0		0x200
+#define SYSMGR_BOOT_SCRATCH_COLD_1		0x204
+#define SYSMGR_BOOT_SCRATCH_COLD_2		0x208
+
 #define DISABLE_BRIDGE_FIREWALL			0x0ffe0101
 #define DISABLE_L4_FIREWALL	(BIT(0) | BIT(16) | BIT(24))
 
diff --git a/plat/intel/soc/agilex/soc/agilex_clock_manager.c b/plat/intel/soc/agilex/soc/agilex_clock_manager.c
index 6e7b43e..218676a 100644
--- a/plat/intel/soc/agilex/soc/agilex_clock_manager.c
+++ b/plat/intel/soc/agilex/soc/agilex_clock_manager.c
@@ -12,15 +12,8 @@
 
 #include "agilex_clock_manager.h"
 #include "agilex_handoff.h"
+#include "agilex_system_manager.h"
 
-static const CLOCK_SOURCE_CONFIG  clk_source = {
-	/* clk_freq_of_eosc1 */
-	(uint32_t) 25000000,
-	/* clk_freq_of_f2h_free */
-	(uint32_t) 400000000,
-	/* clk_freq_of_cb_intosc_ls */
-	(uint32_t) 50000000,
-};
 
 uint32_t wait_pll_lock(void)
 {
@@ -114,18 +107,18 @@
 
 	/* Put both PLL in reset and power down */
 	mmio_clrbits_32(CLKMGR_MAINPLL + CLKMGR_MAINPLL_PLLGLOB,
-			CLKMGR_MAINPLL_PLLGLOB_PD_SET_MSK |
-			CLKMGR_MAINPLL_PLLGLOB_RST_SET_MSK);
+			CLKMGR_PLLGLOB_PD_SET_MSK |
+			CLKMGR_PLLGLOB_RST_SET_MSK);
 	mmio_clrbits_32(CLKMGR_PERPLL + CLKMGR_PERPLL_PLLGLOB,
-			CLKMGR_PERPLL_PLLGLOB_PD_SET_MSK |
-			CLKMGR_PERPLL_PLLGLOB_RST_SET_MSK);
+			CLKMGR_PLLGLOB_PD_SET_MSK |
+			CLKMGR_PLLGLOB_RST_SET_MSK);
 
 	/* Setup main PLL dividers */
-	mdiv = CLKMGR_MAINPLL_PLLM_MDIV(hoff_ptr->main_pll_pllm);
+	mdiv = CLKMGR_PLLM_MDIV(hoff_ptr->main_pll_pllm);
 
-	arefclk_div = CLKMGR_MAINPLL_PLLGLOB_AREFCLKDIV(
+	arefclk_div = CLKMGR_PLLGLOB_AREFCLKDIV(
 			hoff_ptr->main_pll_pllglob);
-	drefclk_div = CLKMGR_MAINPLL_PLLGLOB_DREFCLKDIV(
+	drefclk_div = CLKMGR_PLLGLOB_DREFCLKDIV(
 			hoff_ptr->main_pll_pllglob);
 
 	mscnt = 100 / (mdiv / BIT(drefclk_div));
@@ -134,8 +127,8 @@
 	hscnt = (mdiv * mscnt * BIT(drefclk_div) / arefclk_div) - 4;
 
 	mmio_write_32(CLKMGR_MAINPLL + CLKMGR_MAINPLL_VCOCALIB,
-			CLKMGR_MAINPLL_VCOCALIB_HSCNT_SET(hscnt) |
-			CLKMGR_MAINPLL_VCOCALIB_MSCNT_SET(mscnt));
+			CLKMGR_VCOCALIB_HSCNT_SET(hscnt) |
+			CLKMGR_VCOCALIB_MSCNT_SET(mscnt));
 
 	mmio_write_32(CLKMGR_MAINPLL + CLKMGR_MAINPLL_NOCDIV,
 			hoff_ptr->main_pll_nocdiv);
@@ -159,11 +152,11 @@
 			hoff_ptr->main_pll_nocclk);
 
 	/* Setup peripheral PLL dividers */
-	mdiv = CLKMGR_PERPLL_PLLM_MDIV(hoff_ptr->per_pll_pllm);
+	mdiv = CLKMGR_PLLM_MDIV(hoff_ptr->per_pll_pllm);
 
-	arefclk_div = CLKMGR_PERPLL_PLLGLOB_AREFCLKDIV(
+	arefclk_div = CLKMGR_PLLGLOB_AREFCLKDIV(
 			hoff_ptr->per_pll_pllglob);
-	drefclk_div = CLKMGR_PERPLL_PLLGLOB_DREFCLKDIV(
+	drefclk_div = CLKMGR_PLLGLOB_DREFCLKDIV(
 			hoff_ptr->per_pll_pllglob);
 
 	mscnt = 100 / (mdiv / BIT(drefclk_div));
@@ -172,8 +165,8 @@
 	hscnt = (mdiv * mscnt * BIT(drefclk_div) / arefclk_div) - 4;
 
 	mmio_write_32(CLKMGR_PERPLL + CLKMGR_PERPLL_VCOCALIB,
-			CLKMGR_PERPLL_VCOCALIB_HSCNT_SET(hscnt) |
-			CLKMGR_PERPLL_VCOCALIB_MSCNT_SET(mscnt));
+			CLKMGR_VCOCALIB_HSCNT_SET(hscnt) |
+			CLKMGR_VCOCALIB_MSCNT_SET(mscnt));
 
 	mmio_write_32(CLKMGR_PERPLL + CLKMGR_PERPLL_EMACCTL,
 			hoff_ptr->per_pll_emacctl);
@@ -197,11 +190,11 @@
 
 	/* Take both PLL out of reset and power up */
 	mmio_setbits_32(CLKMGR_MAINPLL + CLKMGR_MAINPLL_PLLGLOB,
-			CLKMGR_MAINPLL_PLLGLOB_PD_SET_MSK |
-			CLKMGR_MAINPLL_PLLGLOB_RST_SET_MSK);
+			CLKMGR_PLLGLOB_PD_SET_MSK |
+			CLKMGR_PLLGLOB_RST_SET_MSK);
 	mmio_setbits_32(CLKMGR_PERPLL + CLKMGR_PERPLL_PLLGLOB,
-			CLKMGR_PERPLL_PLLGLOB_PD_SET_MSK |
-			CLKMGR_PERPLL_PLLGLOB_RST_SET_MSK);
+			CLKMGR_PLLGLOB_PD_SET_MSK |
+			CLKMGR_PLLGLOB_RST_SET_MSK);
 
 	wait_pll_lock();
 
@@ -256,38 +249,123 @@
 			CLKMGR_MAINPLL_EN_RESET);
 	mmio_write_32(CLKMGR_PERPLL + CLKMGR_PERPLL_EN,
 			CLKMGR_PERPLL_EN_RESET);
+
+	/* Pass clock source frequency into scratch register */
+	mmio_write_32(AGX_SYSMGR_CORE(SYSMGR_BOOT_SCRATCH_COLD_1),
+		hoff_ptr->hps_osc_clk_h);
+	mmio_write_32(AGX_SYSMGR_CORE(SYSMGR_BOOT_SCRATCH_COLD_2),
+		hoff_ptr->fpga_clk_hz);
 }
 
-int get_wdt_clk(handoff *hoff_ptr)
+/* Extract reference clock from platform clock source */
+uint32_t get_ref_clk(uint32_t pllglob)
 {
-	int main_noc_base_clk, l3_main_free_clk, l4_sys_free_clk;
-	int data32, mdiv, arefclkdiv, ref_clk;
+	uint32_t arefclkdiv, ref_clk;
+	uint32_t scr_reg;
 
-	data32 = mmio_read_32(CLKMGR_MAINPLL + CLKMGR_MAINPLL_PLLGLOB);
-
-	switch (CLKMGR_MAINPLL_PLLGLOB_PSRC(data32)) {
-	case CLKMGR_MAINPLL_PLLGLOB_PSRC_EOSC1:
-		ref_clk = clk_source.clk_freq_of_eosc1;
+	switch (CLKMGR_PSRC(pllglob)) {
+	case CLKMGR_PLLGLOB_PSRC_EOSC1:
+		scr_reg = AGX_SYSMGR_CORE(SYSMGR_BOOT_SCRATCH_COLD_1);
+		ref_clk = mmio_read_32(scr_reg);
 		break;
-	case CLKMGR_MAINPLL_PLLGLOB_PSRC_INTOSC:
-		ref_clk = clk_source.clk_freq_of_cb_intosc_ls;
+	case CLKMGR_PLLGLOB_PSRC_INTOSC:
+		ref_clk = CLKMGR_INTOSC_HZ;
 		break;
-	case CLKMGR_MAINPLL_PLLGLOB_PSRC_F2S:
-		ref_clk = clk_source.clk_freq_of_f2h_free;
+	case CLKMGR_PLLGLOB_PSRC_F2S:
+		scr_reg = AGX_SYSMGR_CORE(SYSMGR_BOOT_SCRATCH_COLD_2);
+		ref_clk = mmio_read_32(scr_reg);
 		break;
 	default:
 		ref_clk = 0;
 		assert(0);
 		break;
+	}
+
+	arefclkdiv = CLKMGR_PLLGLOB_AREFCLKDIV(pllglob);
+	ref_clk /= arefclkdiv;
+
+	return ref_clk;
+}
+
+/* Calculate clock frequency based on parameter */
+uint32_t get_clk_freq(uint32_t psrc_reg, uint32_t main_pllc, uint32_t per_pllc)
+{
+	uint32_t clk_psrc, mdiv, ref_clk;
+	uint32_t pllm_reg, pllc_reg, pllc_div, pllglob_reg;
+
+	clk_psrc = mmio_read_32(CLKMGR_MAINPLL + psrc_reg);
+
+	switch (CLKMGR_PSRC(clk_psrc)) {
+	case CLKMGR_PSRC_MAIN:
+		pllm_reg = CLKMGR_MAINPLL + CLKMGR_MAINPLL_PLLM;
+		pllc_reg = CLKMGR_MAINPLL + main_pllc;
+		pllglob_reg = CLKMGR_MAINPLL + CLKMGR_MAINPLL_PLLGLOB;
+		break;
+	case CLKMGR_PSRC_PER:
+		pllm_reg = CLKMGR_PERPLL + CLKMGR_PERPLL_PLLM;
+		pllc_reg = CLKMGR_PERPLL + per_pllc;
+		pllglob_reg = CLKMGR_PERPLL + CLKMGR_PERPLL_PLLGLOB;
+		break;
+	default:
+		return 0;
 	}
 
+	ref_clk = get_ref_clk(mmio_read_32(pllglob_reg));
+	mdiv = CLKMGR_PLLM_MDIV(mmio_read_32(pllm_reg));
+	ref_clk *= mdiv;
+
+	pllc_div = mmio_read_32(pllc_reg) & 0x7ff;
+
+	return ref_clk / pllc_div;
+}
+
+/* Return L3 interconnect clock */
+uint32_t get_l3_clk(void)
+{
+	uint32_t l3_clk;
+
+	l3_clk = get_clk_freq(CLKMGR_MAINPLL_NOCCLK, CLKMGR_MAINPLL_PLLC1,
+				CLKMGR_PERPLL_PLLC1);
+	return l3_clk;
+}
+
+/* Calculate clock frequency to be used for watchdog timer */
+uint32_t get_wdt_clk(void)
+{
+	uint32_t l3_clk, l4_sys_clk;
+
+	l3_clk = get_l3_clk();
+	l4_sys_clk = l3_clk / 4;
+
+	return l4_sys_clk;
+}
+
+/* Calculate clock frequency to be used for UART driver */
+uint32_t get_uart_clk(void)
+{
+	uint32_t data32, l3_clk, l4_sp_clk;
+
+	l3_clk = get_l3_clk();
+
+	data32 = mmio_read_32(CLKMGR_MAINPLL + CLKMGR_MAINPLL_NOCDIV);
+	data32 = (data32 >> 16) & 0x3;
+
+	l4_sp_clk = l3_clk >> data32;
+
+	return l4_sp_clk;
+}
+
+/* Calculate clock frequency to be used for SDMMC driver */
+uint32_t get_mmc_clk(void)
+{
+	uint32_t data32, mmc_clk;
+
-	arefclkdiv = CLKMGR_MAINPLL_PLLGLOB_AREFCLKDIV(data32);
-	mdiv = CLKMGR_MAINPLL_PLLM_MDIV(hoff_ptr->main_pll_pllm);
+	mmc_clk = get_clk_freq(CLKMGR_ALTERA_SDMMCCTR,
+		CLKMGR_MAINPLL_PLLC3, CLKMGR_PERPLL_PLLC3);
 
-	ref_clk = (ref_clk / arefclkdiv) * mdiv;
-	main_noc_base_clk = ref_clk / (hoff_ptr->main_pll_pllc1 & 0x7ff);
-	l3_main_free_clk = main_noc_base_clk / (hoff_ptr->main_pll_nocclk + 1);
-	l4_sys_free_clk = l3_main_free_clk / 4;
+	data32 = mmio_read_32(CLKMGR_ALTERA + CLKMGR_ALTERA_SDMMCCTR);
+	data32 = (data32 & 0x7ff) + 1;
+	mmc_clk = (mmc_clk / data32) / 4;
 
-	return l4_sys_free_clk;
+	return mmc_clk;
 }
diff --git a/plat/intel/soc/agilex/soc/agilex_memory_controller.c b/plat/intel/soc/agilex/soc/agilex_memory_controller.c
index 9fc3e0a..5f3cae7 100644
--- a/plat/intel/soc/agilex/soc/agilex_memory_controller.c
+++ b/plat/intel/soc/agilex/soc/agilex_memory_controller.c
@@ -19,7 +19,7 @@
 #define MAX_MEM_CAL_RETRY		3
 #define PRE_CALIBRATION_DELAY		1
 #define POST_CALIBRATION_DELAY		1
-#define TIMEOUT_EMIF_CALIBRATION	100
+#define TIMEOUT_EMIF_CALIBRATION	1000
 #define CLEAR_EMIF_DELAY		50000
 #define CLEAR_EMIF_TIMEOUT		0x100000
 #define TIMEOUT_INT_RESP		10000
@@ -109,7 +109,7 @@
 
 static int mem_calibration(void)
 {
-	int status = 0;
+	int status;
 	uint32_t data;
 	unsigned long timeout;
 	unsigned long retry = 0;
@@ -125,13 +125,13 @@
 			data = mmio_read_32(AGX_MPFE_HMC_ADP_DDRCALSTAT);
 			if (AGX_MPFE_HMC_ADP_DDRCALSTAT_CAL(data) == 1)
 				break;
-			udelay(1);
+			mdelay(1);
 		} while (++timeout < TIMEOUT_EMIF_CALIBRATION);
 
 		if (AGX_MPFE_HMC_ADP_DDRCALSTAT_CAL(data) == 0) {
 			status = clear_emif();
-		if (status)
-			ERROR("Failed to clear Emif\n");
+			if (status)
+				ERROR("Failed to clear Emif\n");
 		} else {
 			break;
 		}
@@ -160,8 +160,6 @@
 		return status;
 	}
 
-/*	mmio_clrbits_32(AGX_RSTMGR_BRGMODRST, AGX_RSTMGR_BRGMODRST_DDRSCH);*/
-
 	status = mem_calibration();
 	if (status) {
 		ERROR("DDR: Memory Calibration Failed\n");
@@ -169,7 +167,6 @@
 	}
 
 	configure_hmc_adaptor_regs();
-/*	configure_ddr_sched_ctrl_regs();*/
 
 	return 0;
 }
@@ -348,20 +345,28 @@
 		mmio_read_32(AGX_MPFE_IOHMC_REG_NIOSRESERVE0_OFST));
 	dram_io_width = (dram_io_width & 0xFF) >> 5;
 
+	data = mmio_read_32(AGX_MPFE_IOHMC_CTRLCFG3);
+
+	dram_io_width |= (data & 0x4);
+
-	mmio_clrsetbits_32(AGX_MPFE_HMC_ADP_DDRIOCTRL,
-		AGX_MPFE_HMC_ADP_DDRIOCTRL_IO_SIZE_MSK,
-		dram_io_width << AGX_MPFE_HMC_ADP_DDRIOCTRL_IO_SIZE_OFST);
+	mmio_write_32(AGX_MPFE_HMC_ADP_DDRIOCTRL, dram_io_width);
 
 	/* Copy dram addr width from IOHMC to HMC ADP */
 	data = mmio_read_32(AGX_MPFE_IOHMC_DRAMADDRW);
 	mmio_write_32(AGX_MPFE_HMC_ADP(ADP_DRAMADDRWIDTH), data);
 
 	/* Enable nonsecure access to DDR */
-	mmio_write_32(AGX_NOC_FW_DDR_SCR_MPUREGION0ADDR_LIMIT,
-			0x4000000 - 1);
-	mmio_write_32(AGX_NOC_FW_DDR_SCR_NONMPUREGION0ADDR_LIMIT,
-			0x4000000 - 1);
-	mmio_write_32(AGX_SOC_NOC_FW_DDR_SCR_ENABLE, BIT(0) | BIT(8));
+	data = get_physical_dram_size();
+
+	if (data < AGX_DDR_SIZE)
+		data = AGX_DDR_SIZE;
+
+	mmio_write_32(AGX_NOC_FW_DDR_SCR_MPUREGION0ADDR_LIMIT, data - 1);
+	mmio_write_32(AGX_NOC_FW_DDR_SCR_MPUREGION0ADDR_LIMITEXT, 0x1f);
+
+	mmio_write_32(AGX_NOC_FW_DDR_SCR_NONMPUREGION0ADDR_LIMIT, data - 1);
+
+	mmio_write_32(AGX_SOC_NOC_FW_DDR_SCR_ENABLESET, BIT(0) | BIT(8));
 
 	/* ECC enablement */
 	data = mmio_read_32(AGX_MPFE_IOHMC_REG_CTRLCFG1);
diff --git a/plat/renesas/rcar/bl2_cpg_init.c b/plat/renesas/rcar/bl2_cpg_init.c
index ed9b772..c3ca9ea 100644
--- a/plat/renesas/rcar/bl2_cpg_init.c
+++ b/plat/renesas/rcar/bl2_cpg_init.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -109,12 +109,12 @@
 #if (RCAR_LSI == RCAR_AUTO) || (RCAR_LSI == RCAR_H3) || (RCAR_LSI == RCAR_H3N)
 static void bl2_realtime_cpg_init_h3(void)
 {
-	uint32_t cut = mmio_read_32(RCAR_PRR) & RCAR_CUT_MASK;
+	uint32_t cut = mmio_read_32(RCAR_PRR) & PRR_CUT_MASK;
 	uint32_t cr0, cr8;
 
-	cr0 = (cut == RCAR_CUT_VER10 || cut == RCAR_CUT_VER11) ?
+	cr0 = (cut == PRR_PRODUCT_10 || cut == PRR_PRODUCT_11) ?
 	    0x00200000U : 0x00210000U;
-	cr8 = (cut == RCAR_CUT_VER10 || cut == RCAR_CUT_VER11) ?
+	cr8 = (cut == PRR_PRODUCT_10 || cut == PRR_PRODUCT_11) ?
 	    0x01F1FFF4U : 0x01F1FFF7U;
 
 	cpg_write(RMSTPCR0, cr0);
@@ -329,7 +329,7 @@
 {
 	uint32_t boot_cpu = mmio_read_32(RCAR_MODEMR) & MODEMR_BOOT_CPU_MASK;
 #if RCAR_LSI == RCAR_AUTO
-	uint32_t product = mmio_read_32(RCAR_PRR) & RCAR_PRODUCT_MASK;
+	uint32_t product = mmio_read_32(RCAR_PRR) & PRR_PRODUCT_MASK;
 #endif
 	bl2_secure_cpg_init();
 
@@ -338,22 +338,22 @@
 #if RCAR_LSI == RCAR_AUTO
 
 		switch (product) {
-		case RCAR_PRODUCT_H3:
+		case PRR_PRODUCT_H3:
 			bl2_realtime_cpg_init_h3();
 			break;
-		case RCAR_PRODUCT_M3:
+		case PRR_PRODUCT_M3:
 			bl2_realtime_cpg_init_m3();
 			break;
-		case RCAR_PRODUCT_M3N:
+		case PRR_PRODUCT_M3N:
 			bl2_realtime_cpg_init_m3n();
 			break;
-		case RCAR_PRODUCT_V3M:
+		case PRR_PRODUCT_V3M:
 			bl2_realtime_cpg_init_v3m();
 			break;
-		case RCAR_PRODUCT_E3:
+		case PRR_PRODUCT_E3:
 			bl2_realtime_cpg_init_e3();
 			break;
-		case RCAR_PRODUCT_D3:
+		case PRR_PRODUCT_D3:
 			bl2_realtime_cpg_init_d3();
 			break;
 		default:
@@ -381,25 +381,25 @@
 void bl2_system_cpg_init(void)
 {
 #if RCAR_LSI == RCAR_AUTO
-	uint32_t product = mmio_read_32(RCAR_PRR) & RCAR_PRODUCT_MASK;
+	uint32_t product = mmio_read_32(RCAR_PRR) & PRR_PRODUCT_MASK;
 
 	switch (product) {
-	case RCAR_PRODUCT_H3:
+	case PRR_PRODUCT_H3:
 		bl2_system_cpg_init_h3();
 		break;
-	case RCAR_PRODUCT_M3:
+	case PRR_PRODUCT_M3:
 		bl2_system_cpg_init_m3();
 		break;
-	case RCAR_PRODUCT_M3N:
+	case PRR_PRODUCT_M3N:
 		bl2_system_cpg_init_m3n();
 		break;
-	case RCAR_PRODUCT_V3M:
+	case PRR_PRODUCT_V3M:
 		bl2_system_cpg_init_v3m();
 		break;
-	case RCAR_PRODUCT_E3:
+	case PRR_PRODUCT_E3:
 		bl2_system_cpg_init_e3();
 		break;
-	case RCAR_PRODUCT_D3:
+	case PRR_PRODUCT_D3:
 		bl2_system_cpg_init_d3();
 		break;
 	default:
diff --git a/plat/renesas/rcar/bl2_plat_setup.c b/plat/renesas/rcar/bl2_plat_setup.c
index 3c9b56f..ebe6ddd 100644
--- a/plat/renesas/rcar/bl2_plat_setup.c
+++ b/plat/renesas/rcar/bl2_plat_setup.c
@@ -65,22 +65,22 @@
 
 /* R-Car Gen3 product check */
 #if (RCAR_LSI == RCAR_H3) || (RCAR_LSI == RCAR_H3N)
-#define TARGET_PRODUCT			RCAR_PRODUCT_H3
+#define TARGET_PRODUCT			PRR_PRODUCT_H3
 #define TARGET_NAME			"R-Car H3"
 #elif RCAR_LSI == RCAR_M3
-#define TARGET_PRODUCT			RCAR_PRODUCT_M3
+#define TARGET_PRODUCT			PRR_PRODUCT_M3
 #define TARGET_NAME			"R-Car M3"
 #elif RCAR_LSI == RCAR_M3N
-#define TARGET_PRODUCT			RCAR_PRODUCT_M3N
+#define TARGET_PRODUCT			PRR_PRODUCT_M3N
 #define TARGET_NAME			"R-Car M3N"
 #elif RCAR_LSI == RCAR_V3M
-#define TARGET_PRODUCT			RCAR_PRODUCT_V3M
+#define TARGET_PRODUCT			PRR_PRODUCT_V3M
 #define TARGET_NAME			"R-Car V3M"
 #elif RCAR_LSI == RCAR_E3
-#define TARGET_PRODUCT			RCAR_PRODUCT_E3
+#define TARGET_PRODUCT			PRR_PRODUCT_E3
 #define TARGET_NAME			"R-Car E3"
 #elif RCAR_LSI == RCAR_D3
-#define TARGET_PRODUCT			RCAR_PRODUCT_D3
+#define TARGET_PRODUCT			PRR_PRODUCT_D3
 #define TARGET_NAME			"R-Car D3"
 #elif RCAR_LSI == RCAR_AUTO
 #define TARGET_NAME			"R-Car H3/M3/M3N/V3M"
@@ -238,17 +238,17 @@
 		bl2_secure_setting();
 
 	reg = mmio_read_32(RCAR_PRR);
-	product_cut = reg & (RCAR_PRODUCT_MASK | RCAR_CUT_MASK);
-	product = reg & RCAR_PRODUCT_MASK;
-	cut = reg & RCAR_CUT_MASK;
+	product_cut = reg & (PRR_PRODUCT_MASK | PRR_CUT_MASK);
+	product = reg & PRR_PRODUCT_MASK;
+	cut = reg & PRR_CUT_MASK;
 
-	if (product == RCAR_PRODUCT_M3 && RCAR_CUT_VER30 > cut)
+	if (product == PRR_PRODUCT_M3 && PRR_PRODUCT_30 > cut)
 		goto tlb;
 
-	if (product == RCAR_PRODUCT_H3 && RCAR_CUT_VER20 > cut)
+	if (product == PRR_PRODUCT_H3 && PRR_PRODUCT_20 > cut)
 		goto tlb;
 
-	if (product == RCAR_PRODUCT_D3)
+	if (product == PRR_PRODUCT_D3)
 		goto tlb;
 
 	/* Disable MFIS write protection */
@@ -261,28 +261,28 @@
 	    boot_cpu != MODEMR_BOOT_CPU_CA53)
 		goto mmu;
 
-	if (product_cut == RCAR_PRODUCT_H3_CUT20) {
+	if (product_cut == PRR_PRODUCT_H3_CUT20) {
 		mmio_write_32(IPMMUVI0_IMSCTLR, IMSCTLR_DISCACHE);
 		mmio_write_32(IPMMUVI1_IMSCTLR, IMSCTLR_DISCACHE);
 		mmio_write_32(IPMMUPV0_IMSCTLR, IMSCTLR_DISCACHE);
 		mmio_write_32(IPMMUPV1_IMSCTLR, IMSCTLR_DISCACHE);
 		mmio_write_32(IPMMUPV2_IMSCTLR, IMSCTLR_DISCACHE);
 		mmio_write_32(IPMMUPV3_IMSCTLR, IMSCTLR_DISCACHE);
-	} else if (product_cut == (RCAR_PRODUCT_M3N | RCAR_CUT_VER10) ||
-		   product_cut == (RCAR_PRODUCT_M3N | RCAR_CUT_VER11)) {
+	} else if (product_cut == (PRR_PRODUCT_M3N | PRR_PRODUCT_10) ||
+		   product_cut == (PRR_PRODUCT_M3N | PRR_PRODUCT_11)) {
 		mmio_write_32(IPMMUVI0_IMSCTLR, IMSCTLR_DISCACHE);
 		mmio_write_32(IPMMUPV0_IMSCTLR, IMSCTLR_DISCACHE);
-	} else if ((product_cut == (RCAR_PRODUCT_E3 | RCAR_CUT_VER10)) ||
-		   (product_cut == (RCAR_PRODUCT_E3 | RCAR_CUT_VER11))) {
+	} else if ((product_cut == (PRR_PRODUCT_E3 | PRR_PRODUCT_10)) ||
+		   (product_cut == (PRR_PRODUCT_E3 | PRR_PRODUCT_11))) {
 		mmio_write_32(IPMMUVI0_IMSCTLR, IMSCTLR_DISCACHE);
 		mmio_write_32(IPMMUVP0_IMSCTLR, IMSCTLR_DISCACHE);
 		mmio_write_32(IPMMUPV0_IMSCTLR, IMSCTLR_DISCACHE);
 	}
 
-	if (product_cut == (RCAR_PRODUCT_H3_CUT20) ||
-	    product_cut == (RCAR_PRODUCT_M3N | RCAR_CUT_VER10) ||
-	    product_cut == (RCAR_PRODUCT_M3N | RCAR_CUT_VER11) ||
-	    product_cut == (RCAR_PRODUCT_E3 | RCAR_CUT_VER10)) {
+	if (product_cut == (PRR_PRODUCT_H3_CUT20) ||
+	    product_cut == (PRR_PRODUCT_M3N | PRR_PRODUCT_10) ||
+	    product_cut == (PRR_PRODUCT_M3N | PRR_PRODUCT_11) ||
+	    product_cut == (PRR_PRODUCT_E3 | PRR_PRODUCT_10)) {
 		mmio_write_32(IPMMUHC_IMSCTLR, IMSCTLR_DISCACHE);
 		mmio_write_32(IPMMURT_IMSCTLR, IMSCTLR_DISCACHE);
 		mmio_write_32(IPMMUMP_IMSCTLR, IMSCTLR_DISCACHE);
@@ -458,28 +458,28 @@
 	}
 
 	reg = mmio_read_32(RCAR_PRR);
-	switch (reg & RCAR_PRODUCT_MASK) {
-	case RCAR_PRODUCT_H3:
+	switch (reg & PRR_PRODUCT_MASK) {
+	case PRR_PRODUCT_H3:
 		ret = fdt_appendprop_string(fdt, 0, "compatible",
 					    "renesas,r8a7795");
 		break;
-	case RCAR_PRODUCT_M3:
+	case PRR_PRODUCT_M3:
 		ret = fdt_appendprop_string(fdt, 0, "compatible",
 					    "renesas,r8a7796");
 		break;
-	case RCAR_PRODUCT_M3N:
+	case PRR_PRODUCT_M3N:
 		ret = fdt_appendprop_string(fdt, 0, "compatible",
 					    "renesas,r8a77965");
 		break;
-	case RCAR_PRODUCT_V3M:
+	case PRR_PRODUCT_V3M:
 		ret = fdt_appendprop_string(fdt, 0, "compatible",
 					    "renesas,r8a77970");
 		break;
-	case RCAR_PRODUCT_E3:
+	case PRR_PRODUCT_E3:
 		ret = fdt_appendprop_string(fdt, 0, "compatible",
 					    "renesas,r8a77990");
 		break;
-	case RCAR_PRODUCT_D3:
+	case PRR_PRODUCT_D3:
 		ret = fdt_appendprop_string(fdt, 0, "compatible",
 					    "renesas,r8a77995");
 		break;
@@ -572,7 +572,7 @@
 	};
 
 	switch (product) {
-	case RCAR_PRODUCT_H3:
+	case PRR_PRODUCT_H3:
 #if (RCAR_DRAM_LPDDR4_MEMCONF == 0)
 		/* 4GB(1GBx4) */
 		dram_config[1] = 0x40000000ULL;
@@ -594,7 +594,7 @@
 #endif /* RCAR_DRAM_LPDDR4_MEMCONF == 0 */
 		break;
 
-	case RCAR_PRODUCT_M3:
+	case PRR_PRODUCT_M3:
 #if (RCAR_GEN3_ULCB == 1)
 		/* 2GB(1GBx2 2ch split) */
 		dram_config[1] = 0x40000000ULL;
@@ -606,17 +606,17 @@
 #endif
 		break;
 
-	case RCAR_PRODUCT_M3N:
+	case PRR_PRODUCT_M3N:
 		/* 2GB(1GBx2) */
 		dram_config[1] = 0x80000000ULL;
 		break;
 
-	case RCAR_PRODUCT_V3M:
+	case PRR_PRODUCT_V3M:
 		/* 1GB(512MBx2) */
 		dram_config[1] = 0x40000000ULL;
 		break;
 
-	case RCAR_PRODUCT_E3:
+	case PRR_PRODUCT_E3:
 #if (RCAR_DRAM_DDR3L_MEMCONF == 0)
 		/* 1GB(512MBx2) */
 		dram_config[1] = 0x40000000ULL;
@@ -629,7 +629,7 @@
 #endif /* RCAR_DRAM_DDR3L_MEMCONF == 0 */
 		break;
 
-	case RCAR_PRODUCT_D3:
+	case PRR_PRODUCT_D3:
 		/* 512MB */
 		dram_config[1] = 0x20000000ULL;
 		break;
@@ -716,26 +716,26 @@
 	       version_of_renesas);
 
 	reg = mmio_read_32(RCAR_PRR);
-	product_cut = reg & (RCAR_PRODUCT_MASK | RCAR_CUT_MASK);
-	product = reg & RCAR_PRODUCT_MASK;
+	product_cut = reg & (PRR_PRODUCT_MASK | PRR_CUT_MASK);
+	product = reg & PRR_PRODUCT_MASK;
 
 	switch (product) {
-	case RCAR_PRODUCT_H3:
+	case PRR_PRODUCT_H3:
 		str = product_h3;
 		break;
-	case RCAR_PRODUCT_M3:
+	case PRR_PRODUCT_M3:
 		str = product_m3;
 		break;
-	case RCAR_PRODUCT_M3N:
+	case PRR_PRODUCT_M3N:
 		str = product_m3n;
 		break;
-	case RCAR_PRODUCT_V3M:
+	case PRR_PRODUCT_V3M:
 		str = product_v3m;
 		break;
-	case RCAR_PRODUCT_E3:
+	case PRR_PRODUCT_E3:
 		str = product_e3;
 		break;
-	case RCAR_PRODUCT_D3:
+	case PRR_PRODUCT_D3:
 		str = product_d3;
 		break;
 	default:
@@ -743,9 +743,9 @@
 		break;
 	}
 
-	if ((RCAR_PRODUCT_M3 == product) &&
-	    (RCAR_CUT_VER20 == (reg & RCAR_MAJOR_MASK))) {
-		if (RCAR_M3_CUT_VER11 == (reg & RCAR_CUT_MASK)) {
+	if ((PRR_PRODUCT_M3 == product) &&
+	    (PRR_PRODUCT_20 == (reg & RCAR_MAJOR_MASK))) {
+		if (RCAR_M3_CUT_VER11 == (reg & PRR_CUT_MASK)) {
 			/* M3 Ver.1.1 or Ver.1.2 */
 			NOTICE("BL2: PRR is R-Car %s Ver.1.1 / Ver.1.2\n",
 				str);
@@ -761,7 +761,7 @@
 		NOTICE("BL2: PRR is R-Car %s Ver.%d.%d\n", str, major, minor);
 	}
 
-	if (product == RCAR_PRODUCT_E3) {
+	if (product == PRR_PRODUCT_E3) {
 		reg = mmio_read_32(RCAR_MODEMR);
 		sscg = reg & RCAR_SSCG_MASK;
 		str = sscg == RCAR_SSCG_ENABLE ? sscg_on : sscg_off;
@@ -930,7 +930,7 @@
 		mmio_write_32(CPG_CA53DBGRCR,
 			      DBGCPUPREN | mmio_read_32(CPG_CA53DBGRCR));
 
-	if (product_cut == RCAR_PRODUCT_H3_CUT10) {
+	if (product_cut == PRR_PRODUCT_H3_CUT10) {
 		reg = mmio_read_32(CPG_PLL2CR);
 		reg &= ~((uint32_t) 1 << 5);
 		mmio_write_32(CPG_PLL2CR, reg);
@@ -1016,7 +1016,7 @@
 
 	/* Set frequency data in CNTFID0 */
 	reg_cntfid = pll_table[modemr_pll >> MODEMR_BOOT_PLL_SHIFT];
-	reg = mmio_read_32(RCAR_PRR) & (RCAR_PRODUCT_MASK | RCAR_CUT_MASK);
+	reg = mmio_read_32(RCAR_PRR) & (PRR_PRODUCT_MASK | PRR_CUT_MASK);
 	switch (modemr_pll) {
 	case MD14_MD13_TYPE_0:
 		rcar_get_board_type(&board_type, &board_rev);
@@ -1025,7 +1025,7 @@
 		}
 		break;
 	case MD14_MD13_TYPE_3:
-		if (RCAR_PRODUCT_H3_CUT10 == reg) {
+		if (PRR_PRODUCT_H3_CUT10 == reg) {
 			reg_cntfid = reg_cntfid >> 1U;
 		}
 		break;
diff --git a/plat/renesas/rcar/bl31_plat_setup.c b/plat/renesas/rcar/bl31_plat_setup.c
index 4fff233..bd83c41 100644
--- a/plat/renesas/rcar/bl31_plat_setup.c
+++ b/plat/renesas/rcar/bl31_plat_setup.c
@@ -44,9 +44,9 @@
 {
 	uint32_t prd;
 
-	prd = mmio_read_32(RCAR_PRR) & (RCAR_PRODUCT_MASK | RCAR_CUT_MASK);
+	prd = mmio_read_32(RCAR_PRR) & (PRR_PRODUCT_MASK | PRR_CUT_MASK);
 
-	if (RCAR_PRODUCT_H3_CUT10 == prd || RCAR_PRODUCT_H3_CUT11 == prd) {
+	if (PRR_PRODUCT_H3_CUT10 == prd || PRR_PRODUCT_H3_CUT11 == prd) {
 		cci_map[0U] = CCI500_CLUSTER0_SL_IFACE_IX;
 		cci_map[1U] = CCI500_CLUSTER1_SL_IFACE_IX;
 	}
diff --git a/plat/renesas/rcar/include/rcar_def.h b/plat/renesas/rcar/include/rcar_def.h
index ac7dc17..a60f9b6 100644
--- a/plat/renesas/rcar/include/rcar_def.h
+++ b/plat/renesas/rcar/include/rcar_def.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved.
+ * Copyright (c) 2015-2019, Renesas Electronics Corporation. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -147,31 +147,34 @@
 #define	RCAR_SYSCISCR		U(0xE6180008)	/* Interrupt stat clear */
 /* Product register */
 #define	RCAR_PRR			U(0xFFF00044)
-#define RCAR_PRODUCT_MASK		U(0x00007F00)
-#define RCAR_CUT_MASK			U(0x000000FF)
-#define RCAR_PRODUCT_H3			U(0x00004F00)
-#define RCAR_PRODUCT_M3			U(0x00005200)
-#define RCAR_PRODUCT_V3M		U(0x00005400)
-#define RCAR_PRODUCT_M3N		U(0x00005500)
-#define RCAR_PRODUCT_E3			U(0x00005700)
-#define RCAR_PRODUCT_D3			U(0x00005800)
-#define RCAR_CUT_VER10			U(0x00000000)
-#define RCAR_CUT_VER11			U(0x00000001)	/* H3/M3N/E3 Ver.1.1 */
 #define RCAR_M3_CUT_VER11		U(0x00000010)	/* M3 Ver.1.1/Ver.1.2 */
-#define RCAR_CUT_VER20			U(0x00000010)
-#define RCAR_CUT_VER30			U(0x00000020)
 #define RCAR_MAJOR_MASK			U(0x000000F0)
 #define RCAR_MINOR_MASK			U(0x0000000F)
-#define RCAR_PRODUCT_SHIFT		U(8)
+#define PRR_PRODUCT_SHIFT		U(8)
 #define RCAR_MAJOR_SHIFT		U(4)
 #define RCAR_MINOR_SHIFT		U(0)
 #define RCAR_MAJOR_OFFSET		U(1)
 #define RCAR_M3_MINOR_OFFSET		U(2)
-#define RCAR_PRODUCT_H3_CUT10		(RCAR_PRODUCT_H3 | U(0x00))	/* 1.0 */
-#define RCAR_PRODUCT_H3_CUT11		(RCAR_PRODUCT_H3 | U(0x01))	/* 1.1 */
-#define RCAR_PRODUCT_H3_CUT20		(RCAR_PRODUCT_H3 | U(0x10))	/* 2.0 */
-#define RCAR_PRODUCT_M3_CUT10		(RCAR_PRODUCT_M3 | U(0x00))	/* 1.0 */
-#define RCAR_PRODUCT_M3_CUT11		(RCAR_PRODUCT_M3 | U(0x10))
+#define PRR_PRODUCT_H3_CUT10		(PRR_PRODUCT_H3 | U(0x00))	/* 1.0 */
+#define PRR_PRODUCT_H3_CUT11		(PRR_PRODUCT_H3 | U(0x01))	/* 1.1 */
+#define PRR_PRODUCT_H3_CUT20		(PRR_PRODUCT_H3 | U(0x10))	/* 2.0 */
+#define PRR_PRODUCT_M3_CUT10		(PRR_PRODUCT_M3 | U(0x00))	/* 1.0 */
+#define PRR_PRODUCT_M3_CUT11		(PRR_PRODUCT_M3 | U(0x10))
+#define PRR				0xFFF00044U
+#define PRR_PRODUCT_MASK		0x00007F00U
+#define PRR_CUT_MASK			0x000000FFU
+#define PRR_PRODUCT_H3			0x00004F00U	/* R-Car H3 */
+#define PRR_PRODUCT_M3			0x00005200U	/* R-Car M3-W */
+#define PRR_PRODUCT_V3M			0x00005400U	/* R-Car V3M */
+#define PRR_PRODUCT_M3N			0x00005500U	/* R-Car M3-N */
+#define PRR_PRODUCT_V3H			0x00005600U	/* R-Car V3H */
+#define PRR_PRODUCT_E3			0x00005700U	/* R-Car E3 */
+#define PRR_PRODUCT_D3			0x00005800U	/* R-Car D3 */
+#define PRR_PRODUCT_10			0x00U		/* Ver.1.0 */
+#define PRR_PRODUCT_11			0x01U		/* Ver.1.1 */
+#define PRR_PRODUCT_20			0x10U		/* Ver.2.0 */
+#define PRR_PRODUCT_21			0x11U		/* Ver.2.1 */
+#define PRR_PRODUCT_30			0x20U		/* Ver.3.0 */
 #define RCAR_CPU_MASK_CA57		U(0x80000000)
 #define RCAR_CPU_MASK_CA53		U(0x04000000)
 #define RCAR_CPU_HAVE_CA57		U(0x00000000)
diff --git a/plat/rockchip/common/bl31_plat_setup.c b/plat/rockchip/common/bl31_plat_setup.c
index a13ee49..c4a0359 100644
--- a/plat/rockchip/common/bl31_plat_setup.c
+++ b/plat/rockchip/common/bl31_plat_setup.c
@@ -14,7 +14,6 @@
 #include <drivers/console.h>
 #include <drivers/generic_delay_timer.h>
 #include <drivers/ti/uart/uart_16550.h>
-#include <lib/coreboot.h>
 #include <lib/mmio.h>
 #include <plat_private.h>
 #include <plat/common/platform.h>
@@ -62,16 +61,10 @@
 
 	params_early_setup(arg1);
 
-#if COREBOOT
-	if (coreboot_serial.type)
-		console_16550_register(coreboot_serial.baseaddr,
-				       coreboot_serial.input_hertz,
-				       coreboot_serial.baud,
-				       &console);
-#else
-	console_16550_register(rockchip_get_uart_base(), PLAT_RK_UART_CLOCK,
-			       PLAT_RK_UART_BAUDRATE, &console);
-#endif
+	if (rockchip_get_uart_base() != 0)
+		console_16550_register(rockchip_get_uart_base(),
+				       rockchip_get_uart_clock(),
+				       rockchip_get_uart_baudrate(), &console);
 
 	VERBOSE("bl31_setup\n");
 
diff --git a/plat/rockchip/common/include/plat_private.h b/plat/rockchip/common/include/plat_private.h
index 714a8bf..990d106 100644
--- a/plat/rockchip/common/include/plat_private.h
+++ b/plat/rockchip/common/include/plat_private.h
@@ -139,6 +139,8 @@
 extern const mmap_region_t plat_rk_mmap[];
 
 uint32_t rockchip_get_uart_base(void);
+uint32_t rockchip_get_uart_baudrate(void);
+uint32_t rockchip_get_uart_clock(void);
 
 #endif /* __ASSEMBLER__ */
 
diff --git a/plat/rockchip/common/params_setup.c b/plat/rockchip/common/params_setup.c
index d0fea4f..8c2e5e9 100644
--- a/plat/rockchip/common/params_setup.c
+++ b/plat/rockchip/common/params_setup.c
@@ -26,12 +26,6 @@
 static struct bl_aux_gpio_info suspend_gpio[10];
 uint32_t suspend_gpio_cnt;
 static struct bl_aux_rk_apio_info suspend_apio;
-static uint32_t rk_uart_base = PLAT_RK_UART_BASE;
-
-uint32_t rockchip_get_uart_base(void)
-{
-	return rk_uart_base;
-}
 
 #if COREBOOT
 static int dt_process_fdt(u_register_t param_from_bl2)
@@ -39,6 +33,9 @@
 	return -ENODEV;
 }
 #else
+static uint32_t rk_uart_base = PLAT_RK_UART_BASE;
+static uint32_t rk_uart_baudrate = PLAT_RK_UART_BAUDRATE;
+static uint32_t rk_uart_clock = PLAT_RK_UART_CLOCK;
 static uint8_t fdt_buffer[0x10000];
 
 void *plat_get_fdt(void)
@@ -53,9 +50,12 @@
 	int node_offset;
 	int stdout_path_len;
 	const char *stdout_path;
+	const char *separator;
+	const char *baud_start;
 	char serial_char;
 	int serial_no;
 	uint32_t uart_base;
+	uint32_t baud;
 
 	node_offset = fdt_path_offset(fdt, path_name);
 	if (node_offset < 0)
@@ -68,7 +68,7 @@
 
 	/*
 	 * We expect something like:
-	 *   "serial0:...""
+	 *   "serial0:baudrate"
 	 */
 	if (strncmp("serial", stdout_path, 6) != 0)
 		return;
@@ -96,11 +96,38 @@
 		uart_base = UART4_BASE;
 		break;
 #endif
+#ifdef UART5_BASE
+	case 5:
+		uart_base = UART5_BASE;
+		break;
+#endif
 	default:
 		return;
 	}
 
 	rk_uart_base = uart_base;
+
+	separator = strchr(stdout_path, ':');
+	if (!separator)
+		return;
+
+	baud = 0;
+	baud_start = separator + 1;
+	while (*baud_start != '\0') {
+		/*
+		 * uart binding is <baud>{<parity>{<bits>{...}}}
+		 * So the baudrate either is the whole string, or
+		 * we end in the parity characters.
+		 */
+		if (*baud_start == 'n' || *baud_start == 'o' ||
+		    *baud_start == 'e')
+			break;
+
+		baud = baud * 10 + (*baud_start - '0');
+		baud_start++;
+	}
+
+	rk_uart_baudrate = baud;
 }
 
 static int dt_process_fdt(u_register_t param_from_bl2)
@@ -118,6 +145,33 @@
 }
 #endif
 
+uint32_t rockchip_get_uart_base(void)
+{
+#if COREBOOT
+	return coreboot_serial.baseaddr;
+#else
+	return rk_uart_base;
+#endif
+}
+
+uint32_t rockchip_get_uart_baudrate(void)
+{
+#if COREBOOT
+	return coreboot_serial.baud;
+#else
+	return rk_uart_baudrate;
+#endif
+}
+
+uint32_t rockchip_get_uart_clock(void)
+{
+#if COREBOOT
+	return coreboot_serial.input_hertz;
+#else
+	return rk_uart_clock;
+#endif
+}
+
 struct bl_aux_gpio_info *plat_get_rockchip_gpio_reset(void)
 {
 	return &rst_gpio;
diff --git a/plat/rockchip/common/sp_min_plat_setup.c b/plat/rockchip/common/sp_min_plat_setup.c
index 7b1a0b5..6d15075 100644
--- a/plat/rockchip/common/sp_min_plat_setup.c
+++ b/plat/rockchip/common/sp_min_plat_setup.c
@@ -15,7 +15,6 @@
 #include <drivers/console.h>
 #include <drivers/generic_delay_timer.h>
 #include <drivers/ti/uart/uart_16550.h>
-#include <lib/coreboot.h>
 #include <lib/mmio.h>
 #include <plat_private.h>
 #include <plat/common/platform.h>
@@ -57,16 +56,11 @@
 
 	params_early_setup(arg1);
 
-#if COREBOOT
-	if (coreboot_serial.type)
-		console_16550_register(coreboot_serial.baseaddr,
-				       coreboot_serial.input_hertz,
-				       coreboot_serial.baud,
-				       &console);
-#else
-	console_16550_register(rockchip_get_uart_base(), PLAT_RK_UART_CLOCK,
-			       PLAT_RK_UART_BAUDRATE, &console);
-#endif
+	if (rockchip_get_uart_base() != 0)
+		console_16550_register(rockchip_get_uart_base(),
+				       rockchip_get_uart_clock(),
+				       rockchip_get_uart_baudrate(), &console);
+
 	VERBOSE("sp_min_setup\n");
 
 	bl31_params_parse_helper(arg0, NULL, &bl33_ep_info);
diff --git a/plat/rockchip/px30/px30_def.h b/plat/rockchip/px30/px30_def.h
index 021165a..9b8ccfc 100644
--- a/plat/rockchip/px30/px30_def.h
+++ b/plat/rockchip/px30/px30_def.h
@@ -54,6 +54,9 @@
 #define UART2_BASE		0xff160000
 #define UART2_SIZE		SIZE_K(64)
 
+#define UART5_BASE		0xff178000
+#define UART5_SIZE		SIZE_K(64)
+
 #define I2C0_BASE		0xff180000
 #define I2C0_SIZE		SIZE_K(64)
 
diff --git a/plat/rockchip/rk3399/drivers/pmu/pmu.c b/plat/rockchip/rk3399/drivers/pmu/pmu.c
index a6b5973..30941fd 100644
--- a/plat/rockchip/rk3399/drivers/pmu/pmu.c
+++ b/plat/rockchip/rk3399/drivers/pmu/pmu.c
@@ -1125,32 +1125,41 @@
 
 void suspend_uart(void)
 {
-	uart_save.uart_lcr = mmio_read_32(PLAT_RK_UART_BASE + UART_LCR);
-	uart_save.uart_ier = mmio_read_32(PLAT_RK_UART_BASE + UART_IER);
-	uart_save.uart_mcr = mmio_read_32(PLAT_RK_UART_BASE + UART_MCR);
-	mmio_write_32(PLAT_RK_UART_BASE + UART_LCR,
+	uint32_t uart_base = rockchip_get_uart_base();
+
+	if (uart_base == 0)
+		return;
+
+	uart_save.uart_lcr = mmio_read_32(uart_base + UART_LCR);
+	uart_save.uart_ier = mmio_read_32(uart_base + UART_IER);
+	uart_save.uart_mcr = mmio_read_32(uart_base + UART_MCR);
+	mmio_write_32(uart_base + UART_LCR,
 		      uart_save.uart_lcr | UARTLCR_DLAB);
-	uart_save.uart_dll = mmio_read_32(PLAT_RK_UART_BASE + UART_DLL);
-	uart_save.uart_dlh = mmio_read_32(PLAT_RK_UART_BASE + UART_DLH);
-	mmio_write_32(PLAT_RK_UART_BASE + UART_LCR, uart_save.uart_lcr);
+	uart_save.uart_dll = mmio_read_32(uart_base + UART_DLL);
+	uart_save.uart_dlh = mmio_read_32(uart_base + UART_DLH);
+	mmio_write_32(uart_base + UART_LCR, uart_save.uart_lcr);
 }
 
 void resume_uart(void)
 {
+	uint32_t uart_base = rockchip_get_uart_base();
 	uint32_t uart_lcr;
 
-	mmio_write_32(PLAT_RK_UART_BASE + UARTSRR,
+	if (uart_base == 0)
+		return;
+
+	mmio_write_32(uart_base + UARTSRR,
 		      XMIT_FIFO_RESET | RCVR_FIFO_RESET | UART_RESET);
 
-	uart_lcr = mmio_read_32(PLAT_RK_UART_BASE + UART_LCR);
-	mmio_write_32(PLAT_RK_UART_BASE + UART_MCR, DIAGNOSTIC_MODE);
-	mmio_write_32(PLAT_RK_UART_BASE + UART_LCR, uart_lcr | UARTLCR_DLAB);
-	mmio_write_32(PLAT_RK_UART_BASE + UART_DLL, uart_save.uart_dll);
-	mmio_write_32(PLAT_RK_UART_BASE + UART_DLH, uart_save.uart_dlh);
-	mmio_write_32(PLAT_RK_UART_BASE + UART_LCR, uart_save.uart_lcr);
-	mmio_write_32(PLAT_RK_UART_BASE + UART_IER, uart_save.uart_ier);
-	mmio_write_32(PLAT_RK_UART_BASE + UART_FCR, UARTFCR_FIFOEN);
-	mmio_write_32(PLAT_RK_UART_BASE + UART_MCR, uart_save.uart_mcr);
+	uart_lcr = mmio_read_32(uart_base + UART_LCR);
+	mmio_write_32(uart_base + UART_MCR, DIAGNOSTIC_MODE);
+	mmio_write_32(uart_base + UART_LCR, uart_lcr | UARTLCR_DLAB);
+	mmio_write_32(uart_base + UART_DLL, uart_save.uart_dll);
+	mmio_write_32(uart_base + UART_DLH, uart_save.uart_dlh);
+	mmio_write_32(uart_base + UART_LCR, uart_save.uart_lcr);
+	mmio_write_32(uart_base + UART_IER, uart_save.uart_ier);
+	mmio_write_32(uart_base + UART_FCR, UARTFCR_FIFOEN);
+	mmio_write_32(uart_base + UART_MCR, uart_save.uart_mcr);
 }
 
 void save_usbphy(void)
diff --git a/services/spd/opteed/opteed.mk b/services/spd/opteed/opteed.mk
index b1b2175..643b054 100644
--- a/services/spd/opteed/opteed.mk
+++ b/services/spd/opteed/opteed.mk
@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@@ -13,3 +13,6 @@
 				services/spd/opteed/opteed_pm.c
 
 NEED_BL32		:=	yes
+
+# required so that optee code can control access to the timer registers
+NS_TIMER_SWITCH		:=	1
diff --git a/services/std_svc/spm/spm_buffers.c b/services/std_svc/spm/spm_buffers.c
index 3e0c949..79398ba 100644
--- a/services/std_svc/spm/spm_buffers.c
+++ b/services/std_svc/spm/spm_buffers.c
@@ -38,6 +38,8 @@
 		struct sprt_response *resp = &(responses[i]);
 
 		if ((resp->is_valid == 1) && (resp->token == token)) {
+			spin_unlock(&responses_lock);
+
 			return -1;
 		}
 	}
diff --git a/tools/cert_create/src/ext.c b/tools/cert_create/src/ext.c
index 055ddbf..57fb47d 100644
--- a/tools/cert_create/src/ext.c
+++ b/tools/cert_create/src/ext.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -284,6 +284,7 @@
 	ex = ext_new(nid, crit, p, sz);
 
 	/* Clean up */
+	BIO_free(mem);
 	OPENSSL_free(p);
 
 	return ex;
diff --git a/tools/cert_create/src/key.c b/tools/cert_create/src/key.c
index 871f9ee..fece770 100644
--- a/tools/cert_create/src/key.c
+++ b/tools/cert_create/src/key.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -73,6 +73,7 @@
 		goto err;
 	}
 
+	BN_free(e);
 	return 1;
 err:
 	RSA_free(rsa);
diff --git a/tools/cert_create/src/main.c b/tools/cert_create/src/main.c
index ed56620..0f588cc 100644
--- a/tools/cert_create/src/main.c
+++ b/tools/cert_create/src/main.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */