diff --git a/drivers/marvell/mochi/cp110_setup.c b/drivers/marvell/mochi/cp110_setup.c
new file mode 100644
index 0000000..c4cb307
--- /dev/null
+++ b/drivers/marvell/mochi/cp110_setup.c
@@ -0,0 +1,429 @@
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:     BSD-3-Clause
+ * https://spdx.org/licenses
+ */
+
+/* CP110 Marvell SoC driver */
+
+#include <amb_adec.h>
+#include <cp110_setup.h>
+#include <debug.h>
+#include <delay_timer.h>
+#include <iob.h>
+#include <plat_marvell.h>
+
+/*
+ * AXI Configuration.
+ */
+
+ /* Used for Units of CP-110 (e.g. USB device, USB Host, and etc) */
+#define MVEBU_AXI_ATTR_OFFSET			(0x441300)
+#define MVEBU_AXI_ATTR_REG(index)		(MVEBU_AXI_ATTR_OFFSET + \
+							0x4 * index)
+
+/* AXI Protection bits */
+#define MVEBU_AXI_PROT_OFFSET				(0x441200)
+
+/* AXI Protection regs */
+#define MVEBU_AXI_PROT_REG(index)		((index <= 4) ? \
+						(MVEBU_AXI_PROT_OFFSET + \
+							0x4 * index) : \
+						(MVEBU_AXI_PROT_OFFSET + 0x18))
+#define MVEBU_AXI_PROT_REGS_NUM			(6)
+
+#define MVEBU_SOC_CFGS_OFFSET			(0x441900)
+#define MVEBU_SOC_CFG_REG(index)		(MVEBU_SOC_CFGS_OFFSET + \
+							0x4 * index)
+#define MVEBU_SOC_CFG_REG_NUM			(0)
+#define MVEBU_SOC_CFG_GLOG_SECURE_EN_MASK	(0xE)
+
+/* SATA3 MBUS to AXI regs */
+#define MVEBU_BRIDGE_WIN_DIS_REG		(MVEBU_SOC_CFGS_OFFSET + 0x10)
+#define MVEBU_BRIDGE_WIN_DIS_OFF		(0x0)
+
+/* SATA3 MBUS to AXI regs */
+#define MVEBU_SATA_M2A_AXI_PORT_CTRL_REG	(0x54ff04)
+
+/* AXI to MBUS bridge registers */
+#define MVEBU_AMB_IP_OFFSET			(0x13ff00)
+#define MVEBU_AMB_IP_BRIDGE_WIN_REG(win)	(MVEBU_AMB_IP_OFFSET + \
+							(win * 0x8))
+#define MVEBU_AMB_IP_BRIDGE_WIN_EN_OFFSET	0
+#define MVEBU_AMB_IP_BRIDGE_WIN_EN_MASK		\
+				(0x1 << MVEBU_AMB_IP_BRIDGE_WIN_EN_OFFSET)
+#define MVEBU_AMB_IP_BRIDGE_WIN_SIZE_OFFSET	16
+#define MVEBU_AMB_IP_BRIDGE_WIN_SIZE_MASK	\
+				(0xffff << MVEBU_AMB_IP_BRIDGE_WIN_SIZE_OFFSET)
+
+#define MVEBU_SAMPLE_AT_RESET_REG	(0x440600)
+#define SAR_PCIE1_CLK_CFG_OFFSET	31
+#define SAR_PCIE1_CLK_CFG_MASK		(0x1 << SAR_PCIE1_CLK_CFG_OFFSET)
+#define SAR_PCIE0_CLK_CFG_OFFSET	30
+#define SAR_PCIE0_CLK_CFG_MASK		(0x1 << SAR_PCIE0_CLK_CFG_OFFSET)
+#define SAR_I2C_INIT_EN_OFFSET		24
+#define SAR_I2C_INIT_EN_MASK		(1 << SAR_I2C_INIT_EN_OFFSET)
+
+/*******************************************************************************
+ * PCIE clock buffer control
+ ******************************************************************************/
+#define MVEBU_PCIE_REF_CLK_BUF_CTRL			(0x4404F0)
+#define PCIE1_REFCLK_BUFF_SOURCE			0x800
+#define PCIE0_REFCLK_BUFF_SOURCE			0x400
+
+/*******************************************************************************
+ * MSS Device Push Set Register
+ ******************************************************************************/
+#define MVEBU_CP_MSS_DPSHSR_REG				(0x280040)
+#define MSS_DPSHSR_REG_PCIE_CLK_SEL			0x8
+
+/*******************************************************************************
+ * RTC Configuration
+ ******************************************************************************/
+#define MVEBU_RTC_BASE					(0x284000)
+#define MVEBU_RTC_STATUS_REG				(MVEBU_RTC_BASE + 0x0)
+#define MVEBU_RTC_STATUS_ALARM1_MASK			0x1
+#define MVEBU_RTC_STATUS_ALARM2_MASK			0x2
+#define MVEBU_RTC_IRQ_1_CONFIG_REG			(MVEBU_RTC_BASE + 0x4)
+#define MVEBU_RTC_IRQ_2_CONFIG_REG			(MVEBU_RTC_BASE + 0x8)
+#define MVEBU_RTC_TIME_REG				(MVEBU_RTC_BASE + 0xC)
+#define MVEBU_RTC_ALARM_1_REG				(MVEBU_RTC_BASE + 0x10)
+#define MVEBU_RTC_ALARM_2_REG				(MVEBU_RTC_BASE + 0x14)
+#define MVEBU_RTC_CCR_REG				(MVEBU_RTC_BASE + 0x18)
+#define MVEBU_RTC_NOMINAL_TIMING			0x2000
+#define MVEBU_RTC_NOMINAL_TIMING_MASK			0x7FFF
+#define MVEBU_RTC_TEST_CONFIG_REG			(MVEBU_RTC_BASE + 0x1C)
+#define MVEBU_RTC_BRIDGE_TIMING_CTRL0_REG		(MVEBU_RTC_BASE + 0x80)
+#define MVEBU_RTC_WRCLK_PERIOD_MASK			0xFFFF
+#define MVEBU_RTC_WRCLK_PERIOD_DEFAULT			0x3FF
+#define MVEBU_RTC_WRCLK_SETUP_OFFS			16
+#define MVEBU_RTC_WRCLK_SETUP_MASK			0xFFFF0000
+#define MVEBU_RTC_WRCLK_SETUP_DEFAULT			0x29
+#define MVEBU_RTC_BRIDGE_TIMING_CTRL1_REG		(MVEBU_RTC_BASE + 0x84)
+#define MVEBU_RTC_READ_OUTPUT_DELAY_MASK		0xFFFF
+#define MVEBU_RTC_READ_OUTPUT_DELAY_DEFAULT		0x1F
+
+enum axi_attr {
+	AXI_ADUNIT_ATTR = 0,
+	AXI_COMUNIT_ATTR,
+	AXI_EIP197_ATTR,
+	AXI_USB3D_ATTR,
+	AXI_USB3H0_ATTR,
+	AXI_USB3H1_ATTR,
+	AXI_SATA0_ATTR,
+	AXI_SATA1_ATTR,
+	AXI_DAP_ATTR,
+	AXI_DFX_ATTR,
+	AXI_DBG_TRC_ATTR = 12,
+	AXI_SDIO_ATTR,
+	AXI_MSS_ATTR,
+	AXI_MAX_ATTR,
+};
+
+/* Most stream IDS are configured centrally in the CP-110 RFU
+ * but some are configured inside the unit registers
+ */
+#define RFU_STREAM_ID_BASE	(0x450000)
+#define USB3H_0_STREAM_ID_REG	(RFU_STREAM_ID_BASE + 0xC)
+#define USB3H_1_STREAM_ID_REG	(RFU_STREAM_ID_BASE + 0x10)
+#define SATA_0_STREAM_ID_REG	(RFU_STREAM_ID_BASE + 0x14)
+#define SATA_1_STREAM_ID_REG	(RFU_STREAM_ID_BASE + 0x18)
+
+#define CP_DMA_0_STREAM_ID_REG  (0x6B0010)
+#define CP_DMA_1_STREAM_ID_REG  (0x6D0010)
+
+/* We allocate IDs 128-255 for PCIe */
+#define MAX_STREAM_ID		(0x80)
+
+uintptr_t stream_id_reg[] = {
+	USB3H_0_STREAM_ID_REG,
+	USB3H_1_STREAM_ID_REG,
+	CP_DMA_0_STREAM_ID_REG,
+	CP_DMA_1_STREAM_ID_REG,
+	SATA_0_STREAM_ID_REG,
+	SATA_1_STREAM_ID_REG,
+	0
+};
+
+static void cp110_errata_wa_init(uintptr_t base)
+{
+	uint32_t data;
+
+	/* ERRATA GL-4076863:
+	 * Reset value for global_secure_enable inputs must be changed
+	 * from '1' to '0'.
+	 * When asserted, only "secured" transactions can enter IHB
+	 * configuration space.
+	 * However, blocking AXI transactions is performed by IOB.
+	 * Performing it also at IHB/HB complicates programming model.
+	 *
+	 * Enable non-secure access in SOC configuration register
+	 */
+	data = mmio_read_32(base + MVEBU_SOC_CFG_REG(MVEBU_SOC_CFG_REG_NUM));
+	data &= ~MVEBU_SOC_CFG_GLOG_SECURE_EN_MASK;
+	mmio_write_32(base + MVEBU_SOC_CFG_REG(MVEBU_SOC_CFG_REG_NUM), data);
+}
+
+static void cp110_pcie_clk_cfg(uintptr_t base)
+{
+	uint32_t pcie0_clk, pcie1_clk, reg;
+
+	/*
+	 * Determine the pcie0/1 clock direction (input/output) from the
+	 * sample at reset.
+	 */
+	reg = mmio_read_32(base + MVEBU_SAMPLE_AT_RESET_REG);
+	pcie0_clk = (reg & SAR_PCIE0_CLK_CFG_MASK) >> SAR_PCIE0_CLK_CFG_OFFSET;
+	pcie1_clk = (reg & SAR_PCIE1_CLK_CFG_MASK) >> SAR_PCIE1_CLK_CFG_OFFSET;
+
+	/* CP110 revision A2 */
+	if (cp110_rev_id_get(base) == MVEBU_CP110_REF_ID_A2) {
+		/*
+		 * PCIe Reference Clock Buffer Control register must be
+		 * set according to the clock direction (input/output)
+		 */
+		reg = mmio_read_32(base + MVEBU_PCIE_REF_CLK_BUF_CTRL);
+		reg &= ~(PCIE0_REFCLK_BUFF_SOURCE | PCIE1_REFCLK_BUFF_SOURCE);
+		if (!pcie0_clk)
+			reg |= PCIE0_REFCLK_BUFF_SOURCE;
+		if (!pcie1_clk)
+			reg |= PCIE1_REFCLK_BUFF_SOURCE;
+
+		mmio_write_32(base + MVEBU_PCIE_REF_CLK_BUF_CTRL, reg);
+	}
+
+	/* CP110 revision A1 */
+	if (cp110_rev_id_get(base) == MVEBU_CP110_REF_ID_A1) {
+		if (!pcie0_clk || !pcie1_clk) {
+			/*
+			 * if one of the pcie clocks is set to input,
+			 * we need to set mss_push[131] field, otherwise,
+			 * the pcie clock might not work.
+			 */
+			reg = mmio_read_32(base + MVEBU_CP_MSS_DPSHSR_REG);
+			reg |= MSS_DPSHSR_REG_PCIE_CLK_SEL;
+			mmio_write_32(base + MVEBU_CP_MSS_DPSHSR_REG, reg);
+		}
+	}
+}
+
+/* Set a unique stream id for all DMA capable devices */
+static void cp110_stream_id_init(uintptr_t base, uint32_t stream_id)
+{
+	int i = 0;
+
+	while (stream_id_reg[i]) {
+		if (i > MAX_STREAM_ID_PER_CP) {
+			NOTICE("Only first %d (maximum) Stream IDs allocated\n",
+			       MAX_STREAM_ID_PER_CP);
+			return;
+		}
+
+		if ((stream_id_reg[i] == CP_DMA_0_STREAM_ID_REG) ||
+		    (stream_id_reg[i] == CP_DMA_1_STREAM_ID_REG))
+			mmio_write_32(base + stream_id_reg[i],
+				      stream_id << 16 |  stream_id);
+		else
+			mmio_write_32(base + stream_id_reg[i], stream_id);
+
+		/* SATA port 0/1 are in the same SATA unit, and they should use
+		 * the same STREAM ID number
+		 */
+		if (stream_id_reg[i] != SATA_0_STREAM_ID_REG)
+			stream_id++;
+
+		i++;
+	}
+}
+
+static void cp110_axi_attr_init(uintptr_t base)
+{
+	uint32_t index, data;
+
+	/* Initialize AXI attributes for Armada-7K/8K SoC */
+
+	/* Go over the AXI attributes and set Ax-Cache and Ax-Domain */
+	for (index = 0; index < AXI_MAX_ATTR; index++) {
+		switch (index) {
+		/* DFX and MSS unit works with no coherent only -
+		 * there's no option to configure the Ax-Cache and Ax-Domain
+		 */
+		case AXI_DFX_ATTR:
+		case AXI_MSS_ATTR:
+			continue;
+		default:
+			/* Set Ax-Cache as cacheable, no allocate, modifiable,
+			 * bufferable
+			 * The values are different because Read & Write
+			 * definition is different in Ax-Cache
+			 */
+			data = mmio_read_32(base + MVEBU_AXI_ATTR_REG(index));
+			data &= ~MVEBU_AXI_ATTR_ARCACHE_MASK;
+			data |= (CACHE_ATTR_WRITE_ALLOC |
+				 CACHE_ATTR_CACHEABLE   |
+				 CACHE_ATTR_BUFFERABLE) <<
+				 MVEBU_AXI_ATTR_ARCACHE_OFFSET;
+			data &= ~MVEBU_AXI_ATTR_AWCACHE_MASK;
+			data |= (CACHE_ATTR_READ_ALLOC |
+				 CACHE_ATTR_CACHEABLE  |
+				 CACHE_ATTR_BUFFERABLE) <<
+				 MVEBU_AXI_ATTR_AWCACHE_OFFSET;
+			/* Set Ax-Domain as Outer domain */
+			data &= ~MVEBU_AXI_ATTR_ARDOMAIN_MASK;
+			data |= DOMAIN_OUTER_SHAREABLE <<
+				MVEBU_AXI_ATTR_ARDOMAIN_OFFSET;
+			data &= ~MVEBU_AXI_ATTR_AWDOMAIN_MASK;
+			data |= DOMAIN_OUTER_SHAREABLE <<
+				MVEBU_AXI_ATTR_AWDOMAIN_OFFSET;
+			mmio_write_32(base + MVEBU_AXI_ATTR_REG(index), data);
+		}
+	}
+
+	/* SATA IOCC supported, cache attributes
+	 * for SATA MBUS to AXI configuration.
+	 */
+	data = mmio_read_32(base + MVEBU_SATA_M2A_AXI_PORT_CTRL_REG);
+	data &= ~MVEBU_SATA_M2A_AXI_AWCACHE_MASK;
+	data |= (CACHE_ATTR_WRITE_ALLOC |
+		 CACHE_ATTR_CACHEABLE   |
+		 CACHE_ATTR_BUFFERABLE) <<
+		 MVEBU_SATA_M2A_AXI_AWCACHE_OFFSET;
+	data &= ~MVEBU_SATA_M2A_AXI_ARCACHE_MASK;
+	data |= (CACHE_ATTR_READ_ALLOC |
+		 CACHE_ATTR_CACHEABLE  |
+		 CACHE_ATTR_BUFFERABLE) <<
+		 MVEBU_SATA_M2A_AXI_ARCACHE_OFFSET;
+	mmio_write_32(base + MVEBU_SATA_M2A_AXI_PORT_CTRL_REG, data);
+
+	/* Set all IO's AXI attribute to non-secure access. */
+	for (index = 0; index < MVEBU_AXI_PROT_REGS_NUM; index++)
+		mmio_write_32(base + MVEBU_AXI_PROT_REG(index),
+			      DOMAIN_SYSTEM_SHAREABLE);
+}
+
+static void amb_bridge_init(uintptr_t base)
+{
+	uint32_t reg;
+
+	/* Open AMB bridge Window to Access COMPHY/MDIO registers */
+	reg = mmio_read_32(base + MVEBU_AMB_IP_BRIDGE_WIN_REG(0));
+	reg &= ~(MVEBU_AMB_IP_BRIDGE_WIN_SIZE_MASK |
+		 MVEBU_AMB_IP_BRIDGE_WIN_EN_MASK);
+	reg |= (0x7ff << MVEBU_AMB_IP_BRIDGE_WIN_SIZE_OFFSET) |
+	       (0x1 << MVEBU_AMB_IP_BRIDGE_WIN_EN_OFFSET);
+	mmio_write_32(base + MVEBU_AMB_IP_BRIDGE_WIN_REG(0), reg);
+}
+
+static void cp110_rtc_init(uintptr_t base)
+{
+	/* Update MBus timing parameters before accessing RTC registers */
+	mmio_clrsetbits_32(base + MVEBU_RTC_BRIDGE_TIMING_CTRL0_REG,
+			   MVEBU_RTC_WRCLK_PERIOD_MASK,
+			   MVEBU_RTC_WRCLK_PERIOD_DEFAULT);
+
+	mmio_clrsetbits_32(base + MVEBU_RTC_BRIDGE_TIMING_CTRL0_REG,
+			   MVEBU_RTC_WRCLK_SETUP_MASK,
+			   MVEBU_RTC_WRCLK_SETUP_DEFAULT <<
+			   MVEBU_RTC_WRCLK_SETUP_OFFS);
+
+	mmio_clrsetbits_32(base + MVEBU_RTC_BRIDGE_TIMING_CTRL1_REG,
+			   MVEBU_RTC_READ_OUTPUT_DELAY_MASK,
+			   MVEBU_RTC_READ_OUTPUT_DELAY_DEFAULT);
+
+	/*
+	 * Issue reset to the RTC if Clock Correction register
+	 * contents did not sustain the reboot/power-on.
+	 */
+	if ((mmio_read_32(base + MVEBU_RTC_CCR_REG) &
+	    MVEBU_RTC_NOMINAL_TIMING_MASK) != MVEBU_RTC_NOMINAL_TIMING) {
+		/* Reset Test register */
+		mmio_write_32(base + MVEBU_RTC_TEST_CONFIG_REG, 0);
+		mdelay(500);
+
+		/* Reset Time register */
+		mmio_write_32(base + MVEBU_RTC_TIME_REG, 0);
+		udelay(62);
+
+		/* Reset Status register */
+		mmio_write_32(base + MVEBU_RTC_STATUS_REG,
+			      (MVEBU_RTC_STATUS_ALARM1_MASK |
+			      MVEBU_RTC_STATUS_ALARM2_MASK));
+		udelay(62);
+
+		/* Turn off Int1 and Int2 sources & clear the Alarm count */
+		mmio_write_32(base + MVEBU_RTC_IRQ_1_CONFIG_REG, 0);
+		mmio_write_32(base + MVEBU_RTC_IRQ_2_CONFIG_REG, 0);
+		mmio_write_32(base + MVEBU_RTC_ALARM_1_REG, 0);
+		mmio_write_32(base + MVEBU_RTC_ALARM_2_REG, 0);
+
+		/* Setup nominal register access timing */
+		mmio_write_32(base + MVEBU_RTC_CCR_REG,
+			      MVEBU_RTC_NOMINAL_TIMING);
+
+		/* Reset Time register */
+		mmio_write_32(base + MVEBU_RTC_TIME_REG, 0);
+		udelay(10);
+
+		/* Reset Status register */
+		mmio_write_32(base + MVEBU_RTC_STATUS_REG,
+			      (MVEBU_RTC_STATUS_ALARM1_MASK |
+			      MVEBU_RTC_STATUS_ALARM2_MASK));
+		udelay(50);
+	}
+}
+
+static void cp110_amb_adec_init(uintptr_t base)
+{
+	/* enable AXI-MBUS by clearing "Bridge Windows Disable" */
+	mmio_clrbits_32(base + MVEBU_BRIDGE_WIN_DIS_REG,
+			(1 << MVEBU_BRIDGE_WIN_DIS_OFF));
+
+	/* configure AXI-MBUS windows for CP */
+	init_amb_adec(base);
+}
+
+void cp110_init(uintptr_t cp110_base, uint32_t stream_id)
+{
+	INFO("%s: Initialize CPx - base = %lx\n", __func__, cp110_base);
+
+	/* configure IOB windows for CP0*/
+	init_iob(cp110_base);
+
+	/* configure AXI-MBUS windows for CP0*/
+	cp110_amb_adec_init(cp110_base);
+
+	/* configure axi for CP0*/
+	cp110_axi_attr_init(cp110_base);
+
+	/* Execute SW WA for erratas */
+	cp110_errata_wa_init(cp110_base);
+
+	/* Confiure pcie clock according to clock direction */
+	cp110_pcie_clk_cfg(cp110_base);
+
+	/* configure stream id for CP0 */
+	cp110_stream_id_init(cp110_base, stream_id);
+
+	/* Open AMB bridge for comphy for CP0 & CP1*/
+	amb_bridge_init(cp110_base);
+
+	/* Reset RTC if needed */
+	cp110_rtc_init(cp110_base);
+}
+
+/* Do the minimal setup required to configure the CP in BLE */
+void cp110_ble_init(uintptr_t cp110_base)
+{
+#if PCI_EP_SUPPORT
+	INFO("%s: Initialize CPx - base = %lx\n", __func__, cp110_base);
+
+	amb_bridge_init(cp110_base);
+
+	/* Configure PCIe clock */
+	cp110_pcie_clk_cfg(cp110_base);
+
+	/* Configure PCIe endpoint */
+	ble_plat_pcie_ep_setup();
+#endif
+}